-
Integration of 5G and Motion Sensors for Vehicular Positioning: A Loosely-Coupled Approach
Authors:
Sharief Saleh,
Qamar Bader,
Malek Karaim,
Mohamed Elhabiby,
Aboelmagd Noureldin
Abstract:
Autonomous vehicles (AVs) are poised to revolutionize the transportation industry by enhancing traffic efficiency and road safety. However, achieving optimal vehicular autonomy demands an uninterrupted and precise positioning solution, especially in deep urban environments. 5G mmWave holds immense potential to provide such a service due to its accurate range and angle measurements. Yet, as mmWave…
▽ More
Autonomous vehicles (AVs) are poised to revolutionize the transportation industry by enhancing traffic efficiency and road safety. However, achieving optimal vehicular autonomy demands an uninterrupted and precise positioning solution, especially in deep urban environments. 5G mmWave holds immense potential to provide such a service due to its accurate range and angle measurements. Yet, as mmWave signals are prone to signal blockage, severe positioning errors will occur. Most of the 5G positioning literature relies on constant motion models to bridge such 5G outages, which do not capture the true dynamics of the vehicle. Few proposed methodologies rely on inertial measurement units (IMUs) to bridge such gaps, where they predominantly use tightly coupled (TC) integration schemes, introducing a nonlinear 5G measurement model. Such approaches, which rely on Kalman filtering, necessitate the linearization of the measurement model, leading to pronounced positioning errors. In this paper, however, we propose a loosely coupled (LC) sensor fusion scheme to integrate 5G, IMUs, and odometers to mitigate linearization errors. Additionally, we propose a novel method to design the process covariance matrix of the extended Kalman filter (EKF). Moreover, we propose enhancements to the mechanization of the IMU data to enhance the standalone IMU solution. The proposed methodologies were tested using a novel setup comprising 5G measurements from Siradel's S_5G simulation tool and real IMU and odometer measurements from an hour-long trajectory. The proposed method resulted in 14 cm of error for 95% of the time compared to 1 m provided by the traditional constant velocity model approach.
△ Less
Submitted 16 March, 2024;
originally announced March 2024.
-
Demonstrating the Merits of Integrating Multipath Signals into 5G LoS-Based Positioning Systems for Navigation in Challenging Environments
Authors:
Qamar Bader,
Sharief Saleh,
Mohamed Elhabiby,
Aboelmagd Noureldin
Abstract:
Constrained environments, such as indoor and urban settings, present a significant challenge for accurate moving object positioning due to the diminished line-of-sight (LoS)communication with the wireless anchor used for positioning. The 5th generation new radio (5G NR) millimeter wave (mmWave) spectrum promises high multipath resolvability in the time and angle domain, enabling the utilization of…
▽ More
Constrained environments, such as indoor and urban settings, present a significant challenge for accurate moving object positioning due to the diminished line-of-sight (LoS)communication with the wireless anchor used for positioning. The 5th generation new radio (5G NR) millimeter wave (mmWave) spectrum promises high multipath resolvability in the time and angle domain, enabling the utilization of multipath signals for such problems rather than mitigating their effects. This paper investigates the benefits of integrating multipath signals into 5G LoS-based positioning systems with onboard motion sensors (OBMS). We provide a comprehensive analysis of the positioning system's performance in various conditions of erroneous 5G measurements and outage scenarios, which offers insights into the system's behavior in challenging environments. To validate our approach, we conducted a road test in downtown Toronto, utilizing actual OBMS measurements gathered from sensors installed in the test vehicle. The results indicate that utilization of multipath signals for wireless positioning operating in multipath-rich environments (e.g. urban and indoor) can bridge 5G LoS signal outages, thus enhancing the reliability and accuracy of the positioning solution. The redundant measurements obtained from the multipath signals can enhance the system's robustness, particularly when low-cost 5G receivers with a limited resolution for angle or range measurements are present. This holds true even when only considering the utilization of single-bounce reflections (SBRs).
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Enabling High-Precision 5G mmWave-Based Positioning for Autonomous Vehicles in Dense Urban Environments
Authors:
Qamar Bader,
Sharief Saleh,
Mohamed Elhabiby,
Aboelmagd Noureldin
Abstract:
5G-based mmWave wireless positioning has emerged as a promising solution for autonomous vehicle (AV) positioning in recent years. Previous studies have highlighted the benefits of fusing a line-of-sight (LoS) 5G positioning solution with an Inertial Navigation System (INS) for an improved positioning solution. However, the highly dynamic environment of urban areas, where AVs are expected to operat…
▽ More
5G-based mmWave wireless positioning has emerged as a promising solution for autonomous vehicle (AV) positioning in recent years. Previous studies have highlighted the benefits of fusing a line-of-sight (LoS) 5G positioning solution with an Inertial Navigation System (INS) for an improved positioning solution. However, the highly dynamic environment of urban areas, where AVs are expected to operate, poses a challenge, as non-line-of-sight (NLoS) communication can deteriorate the 5G mmWave positioning solution and lead to erroneous corrections to the INS. To address this challenge, we exploit 5G multipath and LoS signals to improve positioning performance in dense urban environments. In addition, we integrate the proposed 5G-based positioning with low-cost onboard motion sensors (OBMS). Moreover, the integration is realized using an unscented Kalman filter (UKF) as an alternative to the widely utilized EKF as a fusion engine to avoid ignoring the higher-order and non-linear terms of the dynamic system model. We also introduce techniques to evaluate the quality of each LoS and multipath measurement prior to incorporation into the filter's correction stage. To validate the proposed methodologies, we performed two test trajectories in the dense urban environment of downtown Toronto, Canada. For each trajectory, quasi-real 5G measurements were collected using a ray-tracing tool incorporating 3D map scans of real-world buildings, allowing for realistic multipath scenarios. For the same trajectories, real OBMS data were collected from two-different low-cost IMUs. Our integrated positioning solution was capable of maintaining a level of accuracy below 30 cm for approximately 97% of the time, which is superior to the accuracy level achieved when multipath signals are not considered, which is only around 91% of the time.
△ Less
Submitted 4 May, 2023;
originally announced May 2023.
-
Integrated 5G mmWave Positioning in Deep Urban Environments: Advantages and Challenges
Authors:
Sharief Saleh,
Qamar Bader,
Malek Karaim,
Mohamed Elhabiby,
Aboelmagd Noureldin
Abstract:
Achieving the highest levels of autonomy within autonomous vehicles (AVs) requires a precise and dependable positioning solution that is not influenced by the environment. 5G mmWave signals have been extensively studied in the literature to provide such a positioning solution. Yet, it is evident that 5G alone will not be able to provide uninterrupted positioning services, as outages are inevitable…
▽ More
Achieving the highest levels of autonomy within autonomous vehicles (AVs) requires a precise and dependable positioning solution that is not influenced by the environment. 5G mmWave signals have been extensively studied in the literature to provide such a positioning solution. Yet, it is evident that 5G alone will not be able to provide uninterrupted positioning services, as outages are inevitable to occur. Towards that end, few works have explored the benefits of integrating mmWave positioning with onboard motion sensors (OBMS) like inertial measurement units (IMUs) and odometers. Inspired by INS-GNSS integration literature, all methods defaulted to a tightly-coupled (TC) integration scheme, which hinders the potential of such an integration. Additionally, the proposed methods were validated using simulated 5G and INS data with probability-based line-of-sight (LOS) assumptions. Such an experimental setup fails to highlight the true advantages and challenges of 5G-OBMS integration. Therefore, this study first explores a loosely-coupled (LC) 5G-OBMS integration scheme as a viable alternative to TC schemes. Next, it examines the merits and challenges of such an integration in a deep-urban setting using a novel quasi-real simulation setup. The setup comprises quasi-real 5G measurements from the Siradel simulator and real commercial-grade IMU measurements from a challenging one-hour-long trajectory in downtown Toronto. The trajectory featured multiple natural 5G outages which helped with assessing the integration's performance. The proposed LC method achieved a 14-cm level of accuracy for 95% of the time, while significantly limiting positioning errors during natural 5G outages.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
5G Multi-BS Positioning: A Decentralized Fusion Scheme
Authors:
Sharief Saleh,
Qamar Bader,
Mohamed Elhabiby,
Aboelmagd Noureldin
Abstract:
Fifth-generation (5G) networks are expected to provide high-precision positioning estimation utilizing mmWave signals in urban and downtown areas. In such areas, 5G base stations (BSs) will be densely deployed, allowing for line-of-sight (LOS) communications between the user equipment (UE) and multiple BSs at the same time. Having access to a plethora of measurement sources grants the need for opt…
▽ More
Fifth-generation (5G) networks are expected to provide high-precision positioning estimation utilizing mmWave signals in urban and downtown areas. In such areas, 5G base stations (BSs) will be densely deployed, allowing for line-of-sight (LOS) communications between the user equipment (UE) and multiple BSs at the same time. Having access to a plethora of measurement sources grants the need for optimal integration between the BSs to have an accurate and precise positioning solution. Traditionally, 5G multi-BS fusion is conducted via an extended Kalman filter (EKF), that directly utilizes range and angle measurements in a centralized integration scheme. Such measurements have a non-linear relationship with the positioning states of the filter, giving rise to linearization errors. Counter to the common belief, an unscented Kalman filter (UKF) will fail to totally eradicate such linearization errors. In this paper, we argue that a decentralized integration between 5G BSs would fully avoid linearization errors within the filter and significantly enhance the positioning performance. This is done by fusing position measurements instead of directly fusing range and angle measurements, which inherently leads to a linear measurement model by design. The proposed decentralized KF method was evaluated in a quasi-real simulation setup provided by Siradel using a real trajectory in Downtown Toronto. The experiments compared the performance of decentralized KF integration to that of centralized EKF and UKF integration schemes. It was shown that the proposed method outperformed both UKF and EKF implementations in multiple scenarios as it significantly decreased the RMS and maximum 2D positioning errors, achieving decimeter-level accuracy for 93.9% of the time.
△ Less
Submitted 3 May, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
A Step Closer Towards 5G mmWave-based Multipath Positioning in Dense Urban Environments
Authors:
Qamar Bader,
Sharief Saleh,
Mohamed Elhabiby,
Aboelmagd Noureldin
Abstract:
5G mmWave technology can turn multipath into a friend, as multipath components become highly resolvable in the time and angle domains. Multipath signals have not only been used in the literature to position the user equipment (UE) but also to create a map of the surrounding environment. Yet, many multipath-based methods in the literature share a common assumption, which entails that multipath sign…
▽ More
5G mmWave technology can turn multipath into a friend, as multipath components become highly resolvable in the time and angle domains. Multipath signals have not only been used in the literature to position the user equipment (UE) but also to create a map of the surrounding environment. Yet, many multipath-based methods in the literature share a common assumption, which entails that multipath signals are caused by single-bounce reflections only, which is not usually the case. There are very few methods in the literature that accurately filters out higher-order reflections, which renders the exploitation of multipath signals challenging. This paper proposes an ensemble learning-based model for classifying signal paths based on their order of reflection using 5G channel parameters. The model is trained on a large dataset of 3.6 million observations obtained from a quasi-real ray-tracing based 5G simulator that utilizes 3D maps of real-world downtown environments. The trained model had a testing accuracy of 99.5%. A single-bounce reflection-based positioning method was used to validate the positioning error. The trained model enabled the positioning solution to maintain sub-30cm level accuracy 97% of the time.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
