-
Compact Heterogeneous Integration for Next Generation High Frequency Scalable Array with Miniaturized and Efficient Power Delivery Network
Authors:
Najme Ebrahimi
Abstract:
Next generation communication and sensing require enabling technologies for miniaturized and efficient heterogeneous systems while integrating technologies ranging from silicon to compound semiconductors and from photonic chips to micro-sensors. To this end, high frequency and mm-wave (MMW) lossy parasitics and delay between modules need to be significantly reduced to minimize area, loss and therm…
▽ More
Next generation communication and sensing require enabling technologies for miniaturized and efficient heterogeneous systems while integrating technologies ranging from silicon to compound semiconductors and from photonic chips to micro-sensors. To this end, high frequency and mm-wave (MMW) lossy parasitics and delay between modules need to be significantly reduced to minimize area, loss and thermal heating of inter-chip wiring and power delivery networks. In this work, we propose novel approaches to achieve an efficient wideband MMW array integrations. The proposed techniques are built upon the following: 1) fixed antenna package buildup for every element with differential excitation on two half sides of array to reduce the fabrication cost and the IC-to-antenna routing loss; 2) miniaturized aperture coupled local oscillator (LO) and intermediate frequency (IF) power delivery feed distribution to minimize the packaging stacked layers and their loss. The proposed 16-element antenna array is integrated which 4 dies in 2x2 configurations implemented in a 90-nm SiGe BiCMOS process using compact Weaver image-selection architecture (WISA). The proposed miniaturized and efficient architecture from circuit and chip level to package level results in 1.5 GHz modulation bandwidth for 64 QAM (9 Gb/s) and 2 GHz for 16 QAM with only +-2 dB EVM variation over the 20% FBW (71-86 GHz). The system produces 30-dBm EIRP with enhanced efficiency of 25% EIRP/PDC over the bandwidth
△ Less
Submitted 16 July, 2024; v1 submitted 29 October, 2021;
originally announced November 2021.
-
Dual-band Harmonic and Subharmonic Frequency Generation Circuitry for Joint Communication and Localization Applications Under Severe Multipath Environment
Authors:
Payman Pahlavan,
Najme Ebrahimi
Abstract:
The next generation of ultra-dense connected and automated wireless sensor networks (WSN) requires proximity intelligence for many of its applications, especially for identification and localization. This work presents the first bidirectional circuitry for Internet of Things (IoT) transponder that reciprocally generates harmonics and subharmonics, dual-band frequencies. A multi-band or wideband lo…
▽ More
The next generation of ultra-dense connected and automated wireless sensor networks (WSN) requires proximity intelligence for many of its applications, especially for identification and localization. This work presents the first bidirectional circuitry for Internet of Things (IoT) transponder that reciprocally generates harmonics and subharmonics, dual-band frequencies. A multi-band or wideband localization system is essential for future intelligent WSN to mitigate the influence of multipath signals for indoor dense environment. The proposed frequency generation circuitry is based on the novel nonlinear ring resonator (NRR) operating based on standing wave resonation. The proposed NRR generates two sustainable oscillation frequencies based on the periodicity of the nonlinear circuit in the ring configuration. Due to the symmetry and reciprocity of the ring layout, the two bidirectional ports can excite the circuit at the two opposite nodes while maintaining the required boundary conditions for oscillation. The sustainable resonance conditions occur by creating zero, short impedance, or pole, infinite impedance, at subharmonic and harmonic excitation ports. The NRR circuit consumes zero DC power and covers two communication frequency plans interchangeably, which makes it a premier technique compared to the conventional ultra-wideband (UWB) localization system and conventional single-band nonlinear passive circuitry. The latter is narrowband due to the tunning limitation of the nonlinear varactor while the former is power-hungry approach with complex hardware requirements.
△ Less
Submitted 29 October, 2021;
originally announced October 2021.
-
A 71-76 and 81-86GHz, Scaled 16-Element Transceiver Phased Array with Shared Image Selection Weaver Architecture, 25% EIRP to PDC, and Low EVM Variation
Authors:
Najme Ebrahimi
Abstract:
A 16-element, compact phased array transceiver is demonstrated at E-band (71-76 and 81-86GHz). A Weaver image selection architecture reduces the LO tuning range to 3GHz while covering the 10GHz band. The bidirectional and efficient implementation of Weaver architecture in scalable array is proposed using a bidirectional shared image selection IF mixer. The beam is steered across +/-30° with an ave…
▽ More
A 16-element, compact phased array transceiver is demonstrated at E-band (71-76 and 81-86GHz). A Weaver image selection architecture reduces the LO tuning range to 3GHz while covering the 10GHz band. The bidirectional and efficient implementation of Weaver architecture in scalable array is proposed using a bidirectional shared image selection IF mixer. The beam is steered across +/-30° with an average 30dBm EIRP across the upper and lower bands using narrowband LO phase shifter. A 1.5 GHz modulation bandwidth for 16 QAM and 64 QAM waveform is generated with EVM better than -19 dB/ -24 dB, respectively. The 2x2 transceiver die is implemented in SiGe BiCMOS and is assembled with 16-elements while operating at a 25% EIRP/PDC efficiency.
△ Less
Submitted 31 October, 2019;
originally announced October 2019.
-
Simultaneous Interference-Data Transmission for Secret Key Generation in Distributed IoT Sensor Networks
Authors:
Najme Ebrahimi,
Hun-seok Kim,
D Blaauw
Abstract:
Internet of Things (IoT) networks for smart sensor nodes in the next generation of smart wireless sensing systems require a distributed security scheme to prevent the passive (eavesdropping) or active (jamming and interference) attacks from untrusted sensor nodes. This paper concerns advancing the security of the IoT system to address their vulnerability to being attacked or compromised by the adv…
▽ More
Internet of Things (IoT) networks for smart sensor nodes in the next generation of smart wireless sensing systems require a distributed security scheme to prevent the passive (eavesdropping) or active (jamming and interference) attacks from untrusted sensor nodes. This paper concerns advancing the security of the IoT system to address their vulnerability to being attacked or compromised by the advancement of future supercomputers. In this work, a novel embedded architecture has been designed and implemented for a distributed IoT network that utilizes a master-slave full-duplex communication to exchange the random and continuous modulated phase shift as the secret key to be used in higher-layer encryptions.
△ Less
Submitted 29 October, 2019;
originally announced October 2019.
-
Dynamic Actuator Selection and Robust State-Feedback Control of Networked Soft Actuators
Authors:
Nafiseh Ebrahimi,
Sebastian Nugroho,
Ahmad F. Taha,
Nikolaos Gatsis,
Wei Gao,
Amir Jafari
Abstract:
The design of robots that are light, soft, powerful is a grand challenge. Since they can easily adapt to dynamic environments, soft robotic systems have the potential of changing the status-quo of bulky robotics. A crucial component of soft robotics is a soft actuator that is activated by external stimuli to generate desired motions. Unfortunately, there is a lack of powerful soft actuators that o…
▽ More
The design of robots that are light, soft, powerful is a grand challenge. Since they can easily adapt to dynamic environments, soft robotic systems have the potential of changing the status-quo of bulky robotics. A crucial component of soft robotics is a soft actuator that is activated by external stimuli to generate desired motions. Unfortunately, there is a lack of powerful soft actuators that operate through lightweight power sources. To that end, we recently designed a highly scalable, flexible, biocompatible Electromagnetic Soft Actuator (ESA). With ESAs, artificial muscles can be designed by integrating a network of ESAs. The main research gap addressed in this work is in the absence of system-theoretic understanding of the impact of the realtime control and actuator selection algorithms on the performance of networked soft-body actuators and ESAs. The objective of this paper is to establish a framework that guides the analysis and robust control of networked ESAs. A novel ESA is described, and a configuration of soft actuator matrix to resemble artificial muscle fiber is presented. A mathematical model which depicts the physical network is derived, considering the disturbances due to external forces and linearization errors as an integral part of this model. Then, a robust control and minimal actuator selection problem with logistic constraints and control input bounds is formulated, and tractable computational routines are proposed with numerical case studies.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
