-
Joint Beamforming and Power Control for D2D-Assisted Integrated Sensing and Communication Networks
Authors:
Zhenyu Xue,
Yuang Chen,
Hancheng Lu,
Baolin Chong,
Wanqing Long
Abstract:
Integrated sensing and communication (ISAC) is an emerging technology in next-generation communication networks. However, the communication performance of the ISAC system may be severely affected by interference from the radar system if the sensing task has demanding performance requirements. In this paper, we exploit device-to-device communication (D2D) to improve system communication capacity. T…
▽ More
Integrated sensing and communication (ISAC) is an emerging technology in next-generation communication networks. However, the communication performance of the ISAC system may be severely affected by interference from the radar system if the sensing task has demanding performance requirements. In this paper, we exploit device-to-device communication (D2D) to improve system communication capacity. The ISAC system in a single cell D2D assisted-network is investigated, where the base station (BS) performs target sensing and communication with multiple celluar user equipments (CUEs) as well as D2D user equipments (DUEs) simultaneously communicating with other DUEs by multiplexing the same frequency resource. To achieve the optimal communication performance in the D2D-assisted ISAC system, a joint beamforming and power control problem is formulated with the goal to maximize the sum rate of the system while guaranteeing the performance requirements of radar sensing. Due to the non-convexity of the problem, we propose the algorithm to transform the origin problem into a relaxation form and obtain the solution. We also proposed the zero-forcing (ZF) beamforming scheme to acquire the solution that can eliminate the interference of the BS on DUEs. Extensive numerical simulations demonstrated that with the assistance of the D2D communications, our proposed algorithm significantly outperforms the baseline schemes in the system sum rate.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
Towards Decentralized Task Offloading and Resource Allocation in User-Centric Mobile Edge Computing
Authors:
Langtian Qin,
Hancheng Lu,
Yuang Chen,
Baolin Chong,
Feng Wu
Abstract:
In the traditional cellular-based mobile edge computing (MEC), users at the edge of the cell are prone to suffer severe inter-cell interference and signal attenuation, leading to low throughput even transmission interruptions. Such edge effect severely obstructs offloading of tasks to MEC servers. To address this issue, we propose user-centric mobile edge computing (UCMEC), a novel MEC architectur…
▽ More
In the traditional cellular-based mobile edge computing (MEC), users at the edge of the cell are prone to suffer severe inter-cell interference and signal attenuation, leading to low throughput even transmission interruptions. Such edge effect severely obstructs offloading of tasks to MEC servers. To address this issue, we propose user-centric mobile edge computing (UCMEC), a novel MEC architecture integrating user-centric transmission, which can ensure high throughput and reliable communication for task offloading. Then, we formulate an optimization problem with joint consideration of task offloading, power control, and computing resource allocation in UCMEC, aiming at obtaining the optimal performance in terms of long-term average total delay. To solve the intractable problem, we propose two decentralized joint optimization schemes based on multi-agent deep reinforcement learning (MADRL) and convex optimization, which consider both cooperation and non-cooperation among network nodes. Simulation results demonstrate that the proposed schemes in UCMEC can significantly improve the uplink transmission rate by at most 343.56% and reduce the long-term average total delay by at most 45.57% compared to traditional cellular-based MEC.
△ Less
Submitted 3 December, 2023;
originally announced December 2023.
-
Power Optimization in Multi-IRS Aided Delay-Constrained IoVT Systems
Authors:
Baolin Chong,
Hancheng Lu,
Langtian Qin,
Chenwu Zhang,
Jiasen Li,
Chang Wen Chen
Abstract:
With the advancement of video sensors in the Internet of Things, Internet of Video Things (IoVT) systems, capable of delivering abundant and diverse information, have been increasingly deployed for various applications. However, the extensive transmission of video data in IoVT poses challenges in terms of delay and power consumption. Intelligent reconfigurable surface (IRS), as an emerging technol…
▽ More
With the advancement of video sensors in the Internet of Things, Internet of Video Things (IoVT) systems, capable of delivering abundant and diverse information, have been increasingly deployed for various applications. However, the extensive transmission of video data in IoVT poses challenges in terms of delay and power consumption. Intelligent reconfigurable surface (IRS), as an emerging technology, can enhance communication quality and consequently improve system performance by reconfiguring wireless propagation environments. Inspired by this, we propose a multi-IRS aided IoVT system that leverages IRS to enhance communication quality, thereby reducing power consumption while satisfying delay requirements. To fully leverage the benefits of IRS, we jointly optimize power control for IoVT devices and passive beamforming for IRS to minimize long-term total power consumption under delay constraints. To solve this problem, we first utilize Lyapunov optimization to decouple the long-term optimization problem into each time slot. Subsequently, an alternating optimization algorithm employing optimal solution-seeking and fractional programming is proposed to effectively solve the optimization problems at each time slot. Simulation results demonstrate that the proposed algorithm significantly outperforms benchmark algorithms in terms of long-term total power consumption. Moreover, a trade-off between the number of IRS elements and system performance is also proved.
△ Less
Submitted 24 October, 2023; v1 submitted 4 October, 2023;
originally announced October 2023.
-
On the Distribution of SINR for Cell-Free Massive MIMO Systems
Authors:
Baolin Chong,
Fengqian Guo,
Hancheng Lu,
Langtian Qin
Abstract:
Cell-free (CF) massive multiple-input multiple-output (mMIMO) has been considered as a potential technology for Beyond 5G communication systems. However, the performance of CF mMIMO systems has not been well studied. Most existing analytical work on CF mMIMO systems is based on the expected signal-to-interference-plus-noise ratio (SINR). The statistical characteristics of the SINR, which is critic…
▽ More
Cell-free (CF) massive multiple-input multiple-output (mMIMO) has been considered as a potential technology for Beyond 5G communication systems. However, the performance of CF mMIMO systems has not been well studied. Most existing analytical work on CF mMIMO systems is based on the expected signal-to-interference-plus-noise ratio (SINR). The statistical characteristics of the SINR, which is critical for emerging applications that focus on extreme events, have not been investigated. To address this issue, in this paper, we attempt to obtain the distribution of SINR in CF mMIMO systems. Considering a downlink CF mMIMO system with pilot contamination, we first give the closed-form expression of the SINR. Based on our analytical work on the two components of the SINR, i.e., desired signal and interference-plus-noise, we then derive the probability density function and cumulative distribution function of the SINR under maximum ratio transmission (MRT) and full-pilot zero-forcing (FZF) precoding, respectively. Subsequently, the closed-form expressions for two more sophisticated performance metrics, i.e., achievable rate and outage probability, can be obtained. Finally, we perform Monte Carlo simulations to validate our analytical work. The results demonstrate the effectiveness of the derived SINR distribution, achievable rate, and outage probability.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Achievable Sum Rate Optimization on NOMA-aided Cell-Free Massive MIMO with Finite Blocklength Coding
Authors:
Baolin Chong,
Hancheng Lu,
Yuang Chen,
Langtian Qin,
Fengqian Guo
Abstract:
Non-orthogonal multiple access (NOMA)-aided cell-free massive multiple-input multiple-output (CFmMIMO) has been considered as a promising technology to fulfill strict quality of service requirements for ultra-reliable low-latency communications (URLLC). However, finite blocklength coding (FBC) in URLLC makes it challenging to achieve the optimal performance in the NOMA-aided CFmMIMO system. In thi…
▽ More
Non-orthogonal multiple access (NOMA)-aided cell-free massive multiple-input multiple-output (CFmMIMO) has been considered as a promising technology to fulfill strict quality of service requirements for ultra-reliable low-latency communications (URLLC). However, finite blocklength coding (FBC) in URLLC makes it challenging to achieve the optimal performance in the NOMA-aided CFmMIMO system. In this paper, we investigate the performance of the NOMA-aided CFmMIMO system with FBC in terms of achievable sum rate (ASR). Firstly, we derive a lower bound (LB) on the ergodic data rate. Then, we formulate an ASR maximization problem by jointly considering power allocation and user equipment (UE) clustering. To tackle such an intractable problem, we decompose it into two sub-problems, i.e., the power allocation problem and the UE clustering problem. A successive convex approximation (SCA) algorithm is proposed to solve the power allocation problem by transforming it into a series of geometric programming problems. Meanwhile, two algorithms based on graph theory are proposed to solve the UE clustering problem by identifying negative loops. Finally, alternative optimization is performed to find the maximum ASR of the NOMA-aided CFmMIMO system with FBC. The simulation results demonstrate that the proposed algorithms significantly outperform the benchmark algorithms in terms of ASR under various scenarios.
△ Less
Submitted 25 March, 2024; v1 submitted 3 June, 2023;
originally announced June 2023.
-
CTooth+: A Large-scale Dental Cone Beam Computed Tomography Dataset and Benchmark for Tooth Volume Segmentation
Authors:
Weiwei Cui,
Yaqi Wang,
Yilong Li,
Dan Song,
Xingyong Zuo,
Jiaojiao Wang,
Yifan Zhang,
Huiyu Zhou,
Bung san Chong,
Liaoyuan Zeng,
Qianni Zhang
Abstract:
Accurate tooth volume segmentation is a prerequisite for computer-aided dental analysis. Deep learning-based tooth segmentation methods have achieved satisfying performances but require a large quantity of tooth data with ground truth. The dental data publicly available is limited meaning the existing methods can not be reproduced, evaluated and applied in clinical practice. In this paper, we esta…
▽ More
Accurate tooth volume segmentation is a prerequisite for computer-aided dental analysis. Deep learning-based tooth segmentation methods have achieved satisfying performances but require a large quantity of tooth data with ground truth. The dental data publicly available is limited meaning the existing methods can not be reproduced, evaluated and applied in clinical practice. In this paper, we establish a 3D dental CBCT dataset CTooth+, with 22 fully annotated volumes and 146 unlabeled volumes. We further evaluate several state-of-the-art tooth volume segmentation strategies based on fully-supervised learning, semi-supervised learning and active learning, and define the performance principles. This work provides a new benchmark for the tooth volume segmentation task, and the experiment can serve as the baseline for future AI-based dental imaging research and clinical application development.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
Atrial Fibrillation Detection Using Weight-Pruned, Log-Quantised Convolutional Neural Networks
Authors:
Xiu Qi Chang,
Ann Feng Chew,
Benjamin Chen Ming Choong,
Shuhui Wang,
Rui Han,
Wang He,
Li Xiaolin,
Rajesh C. Panicker,
Deepu John
Abstract:
Deep neural networks (DNN) are a promising tool in medical applications. However, the implementation of complex DNNs on battery-powered devices is challenging due to high energy costs for communication. In this work, a convolutional neural network model is developed for detecting atrial fibrillation from electrocardiogram (ECG) signals. The model demonstrates high performance despite being trained…
▽ More
Deep neural networks (DNN) are a promising tool in medical applications. However, the implementation of complex DNNs on battery-powered devices is challenging due to high energy costs for communication. In this work, a convolutional neural network model is developed for detecting atrial fibrillation from electrocardiogram (ECG) signals. The model demonstrates high performance despite being trained on limited, variable-length input data. Weight pruning and logarithmic quantisation are combined to introduce sparsity and reduce model size, which can be exploited for reduced data movement and lower computational complexity. The final model achieved a 91.1% model compression ratio while maintaining high model accuracy of 91.7% and less than 1% loss.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.