-
Machine Learning Prediction for Phase-less Millimeter-Wave Beam Tracking
Authors:
Benjamin W. Domae,
Veljko Boljanovic,
Ruifu Li,
Danijela Cabric
Abstract:
Future wireless networks may operate at millimeter-wave (mmW) and sub-terahertz (sub-THz) frequencies to enable high data rate requirements. While large antenna arrays are critical for reliable communications at mmW and sub-THz bands, these antenna arrays would also mandate efficient and scalable initial beam alignment and link maintenance algorithms for mobile devices. Low-power phased-array arch…
▽ More
Future wireless networks may operate at millimeter-wave (mmW) and sub-terahertz (sub-THz) frequencies to enable high data rate requirements. While large antenna arrays are critical for reliable communications at mmW and sub-THz bands, these antenna arrays would also mandate efficient and scalable initial beam alignment and link maintenance algorithms for mobile devices. Low-power phased-array architectures and phase-less power measurements due to high frequency oscillator phase noise pose additional challenges for practical beam tracking algorithms. Traditional beam tracking protocols require exhaustive sweeps of all possible beam directions and scale poorly with high mobility and large arrays. Compressive sensing and machine learning designs have been proposed to improve measurement scaling with array size but commonly degrade under hardware impairments or require raw samples respectively. In this work, we introduce a novel long short-term memory (LSTM) network assisted beam tracking and prediction algorithm utilizing only phase-less measurements from fixed compressive codebooks. We demonstrate comparable beam alignment accuracy to state-of-the-art phase-less beam alignment algorithms, while reducing the average number of required measurements over time.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Multi-Mode Spatial Signal Processor with Rainbow-like Fast Beam Training and Wideband Communications using True-Time-Delay Arrays
Authors:
Chung-Ching Lin,
Chase Puglisi,
Veljko Boljanovic,
Han Yan,
Erfan Ghaderi,
Jayce Gaddis,
Qiuyan Xu,
Sreeni Poolakkal,
Danijela Cabric,
Subhanshu Gupta
Abstract:
Initial access in millimeter-wave (mmW) wireless is critical toward successful realization of the fifth-generation (5G) wireless networks and beyond. Limited bandwidth in existing standards and use of phase-shifters in analog/hybrid phased-antenna arrays (PAA) are not suited for these emerging standards demanding low-latency direction finding. This work proposes a reconfigurable true-time-delay (T…
▽ More
Initial access in millimeter-wave (mmW) wireless is critical toward successful realization of the fifth-generation (5G) wireless networks and beyond. Limited bandwidth in existing standards and use of phase-shifters in analog/hybrid phased-antenna arrays (PAA) are not suited for these emerging standards demanding low-latency direction finding. This work proposes a reconfigurable true-time-delay (TTD) based spatial signal processor (SSP) with frequency-division beam training methodology and wideband beam-squint less data communications. Discrete-time delay compensated clocking technique is used to support 800~MHz bandwidth with a large unity-gain bandwidth ring-amplifier (RAMP)-based signal combiner. To extensively characterize the proposed SSP across different SSP modes and frequency-angle pairs, an automated testbed is developed using computer-vision techniques that significantly speeds up the testing progress and minimize possible human errors. Using seven levels of time-interleaving for each of the 4 antenna elements, the TTD SSP has a delay range of 3.8 ns over 800 MHz and achieves unique frequency-to-angle mapping in the beamtraining mode with nearly 12 dB frequency-independent gain in the beamforming mode. The SSP is prototyped in 65nm CMOS with an area of 1.98mm$^2$ consuming only 29 mW excluding buffers. Further, an error vector magnitude (EVM) of 9.8% is realized for 16-QAM modulation at a speed of 122.8 Mb/s.
△ Less
Submitted 7 January, 2022;
originally announced January 2022.
-
Wideband Beamforming with Rainbow Beam Training using Reconfigurable True-Time-Delay Arrays for Millimeter-Wave Wireless
Authors:
Chung-Ching Lin,
Veljko Boljanovic,
Han Yan,
Erfan Ghaderi,
Mohammad Ali Mokri,
Jayce Jeron Gaddis,
Aditya Wadaskar,
Chase Puglisi,
Soumen Mohapatra,
Qiuyan Xu,
Sreeni Poolakkal,
Deukhyoun Heo,
Subhanshu Gupta,
Danijela Cabric
Abstract:
The decadal research in integrated true-time-delay arrays have seen organic growth enabling realization of wideband beamformers for large arrays with wide aperture widths. This article introduces highly reconfigurable delay elements implementable at analog or digital baseband that enables multiple SSP functions including wideband beamforming, wideband interference cancellation, and fast beam train…
▽ More
The decadal research in integrated true-time-delay arrays have seen organic growth enabling realization of wideband beamformers for large arrays with wide aperture widths. This article introduces highly reconfigurable delay elements implementable at analog or digital baseband that enables multiple SSP functions including wideband beamforming, wideband interference cancellation, and fast beam training. Details of the beam-training algorithm, system design considerations, system architecture and circuits with large delay range-to-resolution ratios are presented leveraging integrated delay compensation techniques. The article lays out the framework for true-time-delay based arrays in next-generation network infrastructure supporting 3D beam training in planar arrays, low latency massive multiple access, and emerging wireless communications standards.
△ Less
Submitted 30 November, 2021;
originally announced November 2021.
-
A 4-Element 800MHz-BW 29mW True-Time-Delay Spatial Signal Processor Enabling Fast Beam-Training with Data Communications
Authors:
Chung-Ching Lin,
Chase Puglisi,
Veljko Boljanovic,
Soumen Mohapatra,
Han Yan,
Erfan Ghaderi,
Deukhyoun Heo,
Danijela Cabric,
Subhanshu Gupta
Abstract:
Spatial signal processors (SSP) for emerging millimeter-wave wireless networks are critically dependent on link discovery. To avoid loss in communication, mobile devices need to locate narrow directional beams with millisecond latency. In this work, we demonstrate a true-time-delay (TTD) array with digitally reconfigurable delay elements enabling both fast beam-training at the receiver with wideba…
▽ More
Spatial signal processors (SSP) for emerging millimeter-wave wireless networks are critically dependent on link discovery. To avoid loss in communication, mobile devices need to locate narrow directional beams with millisecond latency. In this work, we demonstrate a true-time-delay (TTD) array with digitally reconfigurable delay elements enabling both fast beam-training at the receiver with wideband data communications. In beam-training mode, large delay-bandwidth products are implemented to accelerate beam training using frequency-dependent probing beams. In data communications mode, precise beam alignment is achieved to mitigate spatial effects during beam-forming for wideband signals. The 4-element switched-capacitor based time-interleaved array uses a compact closed-loop integrator for signal combining with the delay compensation implemented in the clock domain to achieve high precision and large delay range. Prototyped in TSMC 65nm CMOS, the TTD SSP successfully demonstrates unique frequency-to-angle mapping with 3.8ns maximum delay and 800MHz bandwidth in the beam-training mode. In the data communications mode, nearly 12dB uniform beamforming gain is achieved from 80MHz to 800MHz. The TTD SSP consumes 29mW at 1V supply achieving 122MB/s with 16-QAM at 9.8% EVM.
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
True-Time-Delay Arrays for Fast Beam Training in Wideband Millimeter-Wave Systems
Authors:
Veljko Boljanovic,
Han Yan,
Chung-Ching Lin,
Soumen Mohapatra,
Deukhyoun Heo,
Subhanshu Gupta,
Danijela Cabric
Abstract:
The best beam steering directions are estimated through beam training, which is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel array architectures and signal processing techniques are required to avoid prohibitive beam training overhead associated with large antenna arrays and narrow beams. In this work, we leverage recent developments in…
▽ More
The best beam steering directions are estimated through beam training, which is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel array architectures and signal processing techniques are required to avoid prohibitive beam training overhead associated with large antenna arrays and narrow beams. In this work, we leverage recent developments in true-time-delay (TTD) arrays with large delay-bandwidth products to accelerate beam training using frequency-dependent probing beams. We propose and study two TTD architecture candidates, including analog and hybrid analog-digital arrays, that can facilitate beam training with only one wideband pilot. We also propose a suitable algorithm that requires a single pilot to achieve high-accuracy estimation of angle of arrival. The proposed array architectures are compared in terms of beam training requirements and performance, robustness to practical hardware impairments, and power consumption. The findings suggest that the analog and hybrid TTD arrays achieve a sub-degree beam alignment precision with 66% and 25% lower power consumption than a fully digital array, respectively. Our results yield important design trade-offs among the basic system parameters, power consumption, and accuracy of angle of arrival estimation in fast TTD beam training.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Design of Millimeter-Wave Single-Shot Beam Training for True-Time-Delay Array
Authors:
Veljko Boljanovic,
Han Yan,
Erfan Ghaderi,
Deukhyoun Heo,
Subhanshu Gupta,
Danijela Cabric
Abstract:
Beam training is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel transceiver architectures and signal processing techniques are required to avoid prohibitive training overhead when large antenna arrays with narrow beams are used. In this work, we leverage recent developments in wide range true-time-delay (TTD) analog arrays and frequency d…
▽ More
Beam training is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel transceiver architectures and signal processing techniques are required to avoid prohibitive training overhead when large antenna arrays with narrow beams are used. In this work, we leverage recent developments in wide range true-time-delay (TTD) analog arrays and frequency dependent probing beams to accelerate beam training. We propose an algorithm that achieves high-accuracy angle of arrival estimation with a single training symbol. Further, the impact of TTD front-end impairments on beam training accuracy is investigated, including the impact of gain, phase, and delay errors. Lastly, the study on impairments and required specifications of resolution and range of analog delay taps are used to provide a design insight of energy efficient TTD array, which employs a novel architecture with discrete-time sampling based TTD elements.
△ Less
Submitted 4 May, 2020; v1 submitted 18 February, 2020;
originally announced February 2020.
-
Wideband Millimeter-Wave Beam Training with True-Time-Delay Array Architecture
Authors:
Han Yan,
Veljko Boljanovic,
Danijela Cabric
Abstract:
Millimeter-wave communications rely on beamforming gain from both transmitters and receivers to compensate for severe propagation loss. To achieve adequate gain, beam training is required to identify propagation directions. The main challenge in beam training arises from maintaining low overhead with increased array size. This paper presents a novel one-shot beam training technique that utilizes t…
▽ More
Millimeter-wave communications rely on beamforming gain from both transmitters and receivers to compensate for severe propagation loss. To achieve adequate gain, beam training is required to identify propagation directions. The main challenge in beam training arises from maintaining low overhead with increased array size. This paper presents a novel one-shot beam training technique that utilizes the emerging architecture of true-time-delay (TTD) arrays. We first show that TTD arrays facilitate frequency dependent beam steering. The proposed training procedure with TTD arrays then exploits this fact by using a single radio-frequency-chain to multiplex different subcarriers into different sounding directions. We derive conditions on the parameters of TTD array configuration and physical layer to achieve scanning of the entire angular domain with a single orthogonal frequency-division multiplexing (OFDM) training symbol. The estimation of propagation directions with high resolution is achieved via low-complexity digital signal processing of spatially coded subcarriers. Simulation results show that this TTD array based approach requires an order-of-magnitude fewer training symbols than those of phased arrays.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
-
User Association in Dense mmWave Networks based on Rate Requirements
Authors:
Veljko Boljanovic,
Forough Yaghoubi,
Danijela Cabric
Abstract:
Commonly considered user association frameworks in millimeter-wave communications are based on the sum rate maximization, and they essentially neglect user specific rate and service requirements. Furthermore, new features of millimeter-wave communications including spatial multiplexing, connectivity to multiple coordinated base stations and dense base station deployment are not considered. In this…
▽ More
Commonly considered user association frameworks in millimeter-wave communications are based on the sum rate maximization, and they essentially neglect user specific rate and service requirements. Furthermore, new features of millimeter-wave communications including spatial multiplexing, connectivity to multiple coordinated base stations and dense base station deployment are not considered. In this work, we propose a two-step optimization framework for single-shot user association in dense millimeter-wave networks which takes into account users' rate requirements, multi-connectivity, and hybrid transceiver architecture for spatial multiplexing. The proposed framework considers multiple RF chains at each base station and assigns them to different users that also have multiple RF chains for connectivity with more than one base station. In the first step, the objective of the user association is to maximize the number of users with satisfied rate requirements while minimizing network underutilization. In the second step, remaining RF chains are assigned to users, whose rate requirement has not been met, such that network sum rate is maximized. This is a novel problem formulation for user associate in millimeter-wave networks. We propose low complexity sub-optimal user association algorithms based on this formulation, numerically evaluate the optimal and sub-optimal solutions, and compare them to the conventional association approaches in terms of the number of associated users and network sum rate.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
Tracking Sparse mmWave Channel under Time Varying Multipath Scatterers
Authors:
Veljko Boljanovic,
Han Yan,
Danijela Cabric
Abstract:
Due to severe signal attenuation at millimeter-wave (mmWave) frequencies large antenna arrays are required at both base station and user equipment to achieve necessary beamfoming gain and compensate for the signal power loss. The initial access and beamforming algorithms are typically designed assuming sparsity of mmWave channels, resulting from a very few significant multipath clusters, and consi…
▽ More
Due to severe signal attenuation at millimeter-wave (mmWave) frequencies large antenna arrays are required at both base station and user equipment to achieve necessary beamfoming gain and compensate for the signal power loss. The initial access and beamforming algorithms are typically designed assuming sparsity of mmWave channels, resulting from a very few significant multipath clusters, and considering fixed locations of terminals and scatterers. Channel tracking algorithms have been proposed to account for channel variations due to user mobility. Existing works did not consider mobility of the scatterers, which adds new challenges and opportunities into a channel tracking problem. In this work, we consider a more realistic assumption of mobile scatterers and their impact on channel tracking algorithms. We propose a novel channel tracking algorithm that takes into account the dynamics of cluster evolution, and adaptively tracks channel parameters with the objective to reduce training overhead. We also propose a simple implementation of aperiodic tracking to accommodate tracking to different channel variations. We analyze the performance of the proposed tracking algorithm under highly dynamic channels, and compare it to existing channel tracking algorithms with respect to tracking accuracy, achievable rate, and required training overhead, when aperiodic and periodic trackings are used.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Tracking Sparse mmWave Channel: Performance Analysis under Intra-Cluster Angular Spread
Authors:
Han Yan,
Veljko Boljanovic,
Danijela Cabric
Abstract:
Millimeter-wave (mmWave) systems require a large number of antennas at both base station and user equipment for a desirable link budget. Due to time varying channel under user mobility, up-to-date channel state information (CSI) is critical to obtain the required beamforming gain.. The mmWave sparse multipath channel is commonly exploited in designing tracking algorithms but practical angular spre…
▽ More
Millimeter-wave (mmWave) systems require a large number of antennas at both base station and user equipment for a desirable link budget. Due to time varying channel under user mobility, up-to-date channel state information (CSI) is critical to obtain the required beamforming gain.. The mmWave sparse multipath channel is commonly exploited in designing tracking algorithms but practical angular spread is often overlooked. In this work, we study the performance bound of tracking accuracy in sparse mmWave channel that includes intra-cluster angular spreads. Power gain from angle-steering-based beamforming using tracked CSI is then analyzed. The theoretical study provides a design guideline beam-width in angle-steering under different intra-cluster angular spreads. We verify the results with two common tracking algorithms including sector beam tracking and maximum likelihood channel tracking.
△ Less
Submitted 18 July, 2018;
originally announced July 2018.
