-
High-performance magnetostatic wave resonators through deep anisotropic etching of GGG substrates
Authors:
Sudhanshu Tiwari,
Anuj Ashok,
Connor Devitt,
Sunil A. Bhave,
Renyuan Wang
Abstract:
Microscale resonators are fundamental and necessary building blocks for modern radio communication filters for mobile devices. The resonator's Q factor ($Q$) determines the insertion loss while coupling ($K_t^2$) governs the fractional bandwidth. The product $k_t^2 \times Q$ is widely recognized as the definitive figure of merit for microresonators. Magnetostatic wave resonators based on Yttrium I…
▽ More
Microscale resonators are fundamental and necessary building blocks for modern radio communication filters for mobile devices. The resonator's Q factor ($Q$) determines the insertion loss while coupling ($K_t^2$) governs the fractional bandwidth. The product $k_t^2 \times Q$ is widely recognized as the definitive figure of merit for microresonators. Magnetostatic wave resonators based on Yttrium Iron Garnet (YIG) are a promising technology platform for future communication filters. They have shown considerably better performance in terms of $Q$ when compared to the commercially successful acoustic resonators in the $>$7 GHz range. However, the coupling coefficients of these resonators have been limited to $<$3 %, primarily due to the restricted design space imposed by microfabrication challenges related to the patterning of gadolinium gallium garnet (GGG), the substrate material used for growing single crystal YIG. This paper reports novel resonator designs enabled by breakthrough bulk micromachining technology for anisotropic etching of GGG, leading to coupling >8 % in the 6-20 GHz frequency range. We use the same technology platform to show resonant enhancement of effective coupling, reaching up to 23 \% at 10.5 GHz. The frequency of resonant coupling can be tuned by design during the fabrication process. The resonant coupling results in an unprecedented $k_t^2 \times Q$ figure of merit of 191 at 10.5 GHz and 222 at 14.7 GHz. The technology platform presented in this paper supports both tunable filter architecture and switched filter banks that are currently being used in consumer mobile devices.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Adapting model-based deep learning to multiple acquisition conditions: Ada-MoDL
Authors:
Aniket Pramanik,
Sampada Bhave,
Saurav Sajib,
Samir D. Sharma,
Mathews Jacob
Abstract:
Purpose: The aim of this work is to introduce a single model-based deep network that can provide high-quality reconstructions from undersampled parallel MRI data acquired with multiple sequences, acquisition settings and field strengths.
Methods: A single unrolled architecture, which offers good reconstructions for multiple acquisition settings, is introduced. The proposed scheme adapts the mode…
▽ More
Purpose: The aim of this work is to introduce a single model-based deep network that can provide high-quality reconstructions from undersampled parallel MRI data acquired with multiple sequences, acquisition settings and field strengths.
Methods: A single unrolled architecture, which offers good reconstructions for multiple acquisition settings, is introduced. The proposed scheme adapts the model to each setting by scaling the CNN features and the regularization parameter with appropriate weights. The scaling weights and regularization parameter are derived using a multi-layer perceptron model from conditional vectors, which represents the specific acquisition setting. The perceptron parameters and the CNN weights are jointly trained using data from multiple acquisition settings, including differences in field strengths, acceleration, and contrasts. The conditional network is validated using datasets acquired with different acquisition settings.
Results: The comparison of the adaptive framework, which trains a single model using the data from all the settings, shows that it can offer consistently improved performance for each acquisition condition. The comparison of the proposed scheme with networks that are trained independently for each acquisition setting shows that it requires less training data per acquisition setting to offer good performance.
Conclusion: The Ada-MoDL framework enables the use of a single model-based unrolled network for multiple acquisition settings. In addition to eliminating the need to train and store multiple networks for different acquisition settings, this approach reduces the training data needed for each acquisition setting.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
Octave-Tunable Magnetostatic Wave YIG Resonators on a Chip
Authors:
Sen Dai,
Sunil A. Bhave,
Renyuan Wang
Abstract:
We have designed, fabricated, and characterized magnetostatic wave (MSW) resonators on a chip. The resonators are fabricated by patterning single-crystal yttrium iron garnet (YIG) film on a gadolinium gallium garnet (GGG) substrate and excited by loop-inductor transducers. We achieved this technology breakthrough by developing a YIG film etching process and fabricating thick aluminum coplanar wave…
▽ More
We have designed, fabricated, and characterized magnetostatic wave (MSW) resonators on a chip. The resonators are fabricated by patterning single-crystal yttrium iron garnet (YIG) film on a gadolinium gallium garnet (GGG) substrate and excited by loop-inductor transducers. We achieved this technology breakthrough by developing a YIG film etching process and fabricating thick aluminum coplanar waveguide (CPW) inductor loop around each resonator to individually address and excite MSWs. At 4.77 GHz, the 0.68 square mm resonator achieves a quality factor Q > 5000 with a bias field of 987 Oe. We also demonstrate YIG resonator tuning by more than one octave from 3.63 to 7.63 GHz by applying an in-plane external magnetic field. The measured quality factor of the resonator is consistently over 3000 above 4 GHz. The micromachining technology enables the fabrication of multiple single- and two-port YIG resonators on the same chip with all resonators demonstrating octave tunability and high Q .
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Split Slice Training Augmentation and Hyperparameter Tuning of RAKI Networks for Simultaneous Multi-Slice Reconstruction
Authors:
Andrew S. Nencka,
PhD,
Volkan E. Arpinar,
PhD,
Sampada Bhave,
PhD,
Baolian Yang,
PhD,
Suchandrima Banerjee,
Michael McCrea,
PhD,
Nikolai J. Mickevicius,
L. Tugan Muftuler,
Kevin M. Koch
Abstract:
Split-slice augmentation for simultaneous multi-slice RAKI networks positively impacts network performance. Hyperparameter tuning of such reconstruction networks can lead to further improvements in unaliasing performance.
Split-slice augmentation for simultaneous multi-slice RAKI networks positively impacts network performance. Hyperparameter tuning of such reconstruction networks can lead to further improvements in unaliasing performance.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Optimization of hyperparameters for SMS reconstruction
Authors:
L. Tugan Muftuler,
Volkan Emre Arpinar,
Kevin Koch,
Sampada Bhave,
Baolian Yang,
Sivaram Kaushik,
Suchandrima Banerjee,
Andrew Nencka
Abstract:
Simultaneous multi-slice (SMS) imaging accelerates MRI data acquisition by exciting multiple image slices simultaneously. Overlapping slices are then separated using a mathematical model. Several parameters used in SMS reconstruction impact the quality of final images. Therefore, finding an optimal set of reconstruction parameters is critical to ensure that SMS acceleration does not significantly…
▽ More
Simultaneous multi-slice (SMS) imaging accelerates MRI data acquisition by exciting multiple image slices simultaneously. Overlapping slices are then separated using a mathematical model. Several parameters used in SMS reconstruction impact the quality of final images. Therefore, finding an optimal set of reconstruction parameters is critical to ensure that SMS acceleration does not significantly degrade resulting image quality.
Gradient-echo echo planar imaging (EPI) data were acquired with a range of SMS acceleration factors from volunteers. Images were collected using two head coils (a 48-channel array and a smaller 32-channel array). Data from these coils were reconstructed offline using a range of coil compression factors and reconstruction kernel parameters. A hybrid space (ky-x), externally-calibrated coil-by-coil slice unaliasing approach was used for image reconstruction. The resulting SMS images were compared with identical EPI data acquired without SMS. A functional MRI (fMRI) experiment was also performed and group analysis results were compared between data sets reconstructed with different coil compression levels.
The 32-channel coil with smaller dimensions outperformed the larger 48-channel coil in our experiments. Generally, a large calibration region and small kernel sizes in ky direction improved image quality. Use of regularization in the kernel fitting procedure had a notable impact. With optimal selection of other hyperparameters in the hybrid space SMS unaliasing algorithm, coil compression caused small reduction in quality in SMS accelerated images. Similarly, group analysis of fMRI results did not show a significant influence of coil compression on resulting image quality.
Hyperparameters used in SMS reconstruction need to be fine-tuned once the experimental factors such as the RF receive coil and SMS factor have been determined.
△ Less
Submitted 10 April, 2020;
originally announced April 2020.
-
Mechanically Modulated Microwave Circulator
Authors:
Mustafa Mert Torunbalci,
Suresh Sridaran,
Richard Ruby,
Sunil Bhave
Abstract:
This work presents a differential FBAR circulator that uses the bending mode to mechanically modulate the FBAR mode without any varactors or switches. The differential FBAR circulator achieves a 61.5 dB isolation (IX) with an insertion loss (IL) of 1.8 dB at 2.68 GHz, demonstrating the first MEMS-only circulator. The isolation bandwidth at -25 dB is 4.7 MHz and power handling of the circulator is…
▽ More
This work presents a differential FBAR circulator that uses the bending mode to mechanically modulate the FBAR mode without any varactors or switches. The differential FBAR circulator achieves a 61.5 dB isolation (IX) with an insertion loss (IL) of 1.8 dB at 2.68 GHz, demonstrating the first MEMS-only circulator. The isolation bandwidth at -25 dB is 4.7 MHz and power handling of the circulator is limited by the FBARs to +34 dBm.
△ Less
Submitted 26 September, 2019; v1 submitted 13 June, 2019;
originally announced June 2019.
-
An FBAR Circulator
Authors:
Mert M. Torunbalci,
Trevor J. Odelberg,
Suresh Sridaran,
Richard C. Ruby,
Sunil A. Bhave
Abstract:
This letter presents the experimental demonstration of a film bulk acoustic resonator (FBAR) circulator at 2.5 GHz. The circulator is based on spatio-temporal modulation of the series resonant frequency of FBARs using varactors and exhibits a large isolation of 76 dB at 2.5 GHz. The FBAR chip (0.25 mm2) consists of three identical FBARs connected in wye configuration. The FBAR0s quality factor (Q)…
▽ More
This letter presents the experimental demonstration of a film bulk acoustic resonator (FBAR) circulator at 2.5 GHz. The circulator is based on spatio-temporal modulation of the series resonant frequency of FBARs using varactors and exhibits a large isolation of 76 dB at 2.5 GHz. The FBAR chip (0.25 mm2) consists of three identical FBARs connected in wye configuration. The FBAR0s quality factor (Q) of 1250 and piezoelectric coupling coefficient kt 2 of 3% relaxes the modulation requirements, achieving non-reciprocity with small modulationto- RF frequency ratio bettter than 1:800 (3 MHz:2.5 GHz).
△ Less
Submitted 16 April, 2018; v1 submitted 13 October, 2017;
originally announced October 2017.
