-
RIS-Aided Monitoring With Cooperative Jamming: Design and Performance Analysis
Authors:
Shuying Lin,
Yulong Zou,
Zhiyang Li,
Tong Wu,
Eduard E. Bahingayi,
Le-Nam Tran
Abstract:
We investigate a reconfigurable intelligent surface (RIS) aided wireless surveillance system. In this system, a monitor not only receives signal from suspicious transmitter via a RIS-enhanced legitimate surveillance (LS) link but also simultaneously takes control of multiple jammers to degrade the quality of received suspicious signal. Under this setup, to enhance monitoring performance requires i…
▽ More
We investigate a reconfigurable intelligent surface (RIS) aided wireless surveillance system. In this system, a monitor not only receives signal from suspicious transmitter via a RIS-enhanced legitimate surveillance (LS) link but also simultaneously takes control of multiple jammers to degrade the quality of received suspicious signal. Under this setup, to enhance monitoring performance requires improvements of both the received signal quality at the monitor and the cooperative jamming (CJ). Considering that the surveillance system is aided by one RIS, whose phase shift optimization involves both channel state information (CSI) of the LS and CJ links, we utilize partial CSI to alleviate the CSI acquisition burden in our design. We propose two RIS-aided monitoring schemes with optimal jammer selection (OJS), and derive their closed-form expressions of surveillance success probability (SSP), respectively. Furthermore, we consider RIS-aided monitoring schemes with random jammer selection as corresponding benchmarks. Thereafter, we analyze special cases where the jammers are using power control to avoid being found, making it appears like passive monitoring. Also, the effect of RIS is highlighted by considering asymptotically large number of RIS elements. Numerical results verify that the proposed OJS strategy further enhances the RIS-aided monitoring performance compared with non-jammer-selection RISLR and RISCR schemes, where the superiority comes at the cost of CSI knowledge and becomes marginal in the region of high jamming power. In addition, the RISLO shows surveillance performance advantage overRISCOwhen the suspicious power is low or when the number of RIS elements is large.
△ Less
Submitted 25 February, 2025; v1 submitted 21 January, 2025;
originally announced January 2025.
-
Scaling Achievable Rates in SIM-aided MIMO Systems with Metasurface Layers: A Hybrid Optimization Framework
Authors:
Eduard E. Bahingayi,
Nemanja Stefan Perović,
Le-Nam Tran
Abstract:
We investigate the achievable rate (AR) of a stacked intelligent metasurface (SIM)-aided holographic multiple-input multiple-output (HMIMO) system by jointly optimizing the SIM phase shifts and power allocation. Contrary to earlier studies suggesting that the AR decreases when the number of metasurface layers increases past a certain point for \emph{a fixed SIM thickness}, our findings demonstrate…
▽ More
We investigate the achievable rate (AR) of a stacked intelligent metasurface (SIM)-aided holographic multiple-input multiple-output (HMIMO) system by jointly optimizing the SIM phase shifts and power allocation. Contrary to earlier studies suggesting that the AR decreases when the number of metasurface layers increases past a certain point for \emph{a fixed SIM thickness}, our findings demonstrate consistent increase. To achieve this, we introduce two problem formulations: one based on directly maximizing the AR (RMax) and the other focused on minimizing inter-stream interference (IMin). To solve the RMax problem, we apply Riemannian manifold optimization (RMO) and weighted minimum mean square error (WMMSE) methods to optimize the SIM phase shifts and power allocation alternately. For the IMin problem, we derive an efficient algorithm that iteratively updates each meta-atom's phase shift using a closed-form expression while keeping others fixed. Our key contribution is integrating these two approaches, where the IMin solution initializes the SIM phase shifts in the first algorithm. This hybrid strategy enhances AR performance across varying numbers of metasurface layers. Simulation results demonstrate that the proposed algorithms outperform existing benchmarks. Most importantly, we show that increasing the number of metasurface layers while keeping the SIM thickness fixed leads to significant AR improvements.
△ Less
Submitted 5 January, 2025;
originally announced January 2025.
-
On the Joint Beamforming Design for Large-scale Downlink RIS-assisted Multiuser MIMO Systems
Authors:
Eduard E. Bahingayi,
Nemanja Stefan Perović,
Le-Nam Tran
Abstract:
Reconfigurable intelligent surfaces (RISs) have huge potential to improve spectral and energy efficiency in future wireless systems at a minimal cost. However, early prototype results indicate that deploying hundreds or thousands of reflective elements is necessary for significant performance gains. Motivated by this, our study focuses on \emph{large-scale } RIS-assisted multi-user (MU) multiple-i…
▽ More
Reconfigurable intelligent surfaces (RISs) have huge potential to improve spectral and energy efficiency in future wireless systems at a minimal cost. However, early prototype results indicate that deploying hundreds or thousands of reflective elements is necessary for significant performance gains. Motivated by this, our study focuses on \emph{large-scale } RIS-assisted multi-user (MU) multiple-input multiple-output (MIMO) systems. In this context, we propose an efficient algorithm to jointly design the precoders at the base station (BS) and the phase shifts at the RIS to maximize the weighted sum rate (WSR). In particular, leveraging an equivalent lower-dimensional reformulation of the WSR maximization problem, we derive a closed-form solution to optimize the precoders using the successive convex approximation (SCA) framework. While the equivalent reformulation proves to be efficient for the precoder optimization, we offer numerical insights into why the original formulation of the WSR optimization problem is better suited for the phase shift optimization. Subsequently, we develop a scaled projected gradient method (SPGM) and a novel line search procedure to optimize RIS phase shifts. Notably, we show that the complexity of the proposed method \emph{scales linearly with the number of BS antennas and RIS reflective elements}. Extensive numerical experiments demonstrate that the proposed algorithm significantly reduces both time and computational complexity while achieving higher WSR compared to baseline algorithms.
△ Less
Submitted 11 December, 2024;
originally announced December 2024.
-
Hybrid Combining Based on Constant Phase Shifters and Active/Inactive Switches
Authors:
Eduard E. Bahingayi,
Kyungchun Lee
Abstract:
In this paper, we propose a new hybrid analog and digital combining architecture for millimeter wave (mmWave) multi-user multiple-input multiple-output (MU-MIMO) systems. The proposed structure employs antenna subset selection per radio frequency (RF) chain based on active/inactive switches and uses constant phase shifters (CPS) to control the phases of signals in the RF circuit. In this scheme, f…
▽ More
In this paper, we propose a new hybrid analog and digital combining architecture for millimeter wave (mmWave) multi-user multiple-input multiple-output (MU-MIMO) systems. The proposed structure employs antenna subset selection per radio frequency (RF) chain based on active/inactive switches and uses constant phase shifters (CPS) to control the phases of signals in the RF circuit. In this scheme, for each RF chain, a subset of receive antennas that contribute more to the desired signal power than the interference power is chosen for signal combining in the analog domain, whereas other receive antennas are excluded from signal combining, thereby enhancing sum-rates. Simultaneously, the proposed structure reduces power consumption in the RF circuit by exclusively activating switches that correspond to the antennas selected for each RF chain. We also develop three low-complexity algorithms for per-RF chain antenna subset selection. Finally, through numerical simulation, we show that the proposed structure provides higher spectral efficiency and higher energy efficiency than conventional hybrid analog and digital combining schemes for mmWave MU-MIMO systems.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
