Showing 1–50 of 98 results for author: Alkhateeb, A

Constrained Multimodal Sensing-Aided Communications: A Dynamic Beamforming Design

Authors: Abolfazl Zakeri, Nhan Thanh Nguyen, Ahmed Alkhateeb, Markku Juntti

Abstract: Using multimodal sensory data can enhance communications systems by reducing the overhead and latency in beam training. However, processing such data incurs high computational complexity, and continuous sensing results in significant power and bandwidth consumption. This gives rise to a tradeoff between the (multimodal) sensing data acquisition rate and communications performance. In this work, we… ▽ More Using multimodal sensory data can enhance communications systems by reducing the overhead and latency in beam training. However, processing such data incurs high computational complexity, and continuous sensing results in significant power and bandwidth consumption. This gives rise to a tradeoff between the (multimodal) sensing data acquisition rate and communications performance. In this work, we develop a constrained multimodal sensing-aided communications framework where dynamic sensing and beamforming are performed under a sensing budget. Specifically, we formulate an optimization problem that maximizes the average received signal-to-noise ratio (SNR) of user equipment, subject to constraints on the average number of sensing actions and power budget. Using the Saleh-Valenzuela mmWave channel model, we construct the channel primarily based on position information obtained via multimodal sensing. Stricter sensing constraints reduce the availability of position data, leading to degraded channel estimation and thus lower performance. We apply Lyapunov optimization to solve the problem and derive a dynamic sensing and beamforming algorithm. Numerical evaluations on the DeepSense and Raymobtime datasets show that halving sensing times leads to only up to 7.7% loss in average SNR. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Dynamic Joint Communications and Sensing Precoding Design: A Lyapunov Approach

Authors: Abolfazl Zakeri, Nhan Thanh Nguyen, Ahmed Alkhateeb, Markku Juntti

Abstract: This letter proposes a dynamic joint communications and sensing (JCAS) framework to adaptively design dedicated sensing and communications precoders. We first formulate a stochastic control problem to maximize the long-term average signal-to-noise ratio for sensing, subject to a minimum average communications signal-to-interference-plus-noise ratio requirement and a power budget. Using Lyapunov op… ▽ More This letter proposes a dynamic joint communications and sensing (JCAS) framework to adaptively design dedicated sensing and communications precoders. We first formulate a stochastic control problem to maximize the long-term average signal-to-noise ratio for sensing, subject to a minimum average communications signal-to-interference-plus-noise ratio requirement and a power budget. Using Lyapunov optimization, specifically the drift-plus-penalty method, we cast the problem into a sequence of per-slot non-convex problems. To solve these problems, we develop a successive convex approximation method. Additionally, we derive a closed-form solution to the per-slot problems based on the notion of zero-forcing. Numerical evaluations demonstrate the efficacy of the proposed methods and highlight their superiority compared to a baseline method based on conventional design. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Comments: Submitted to an IEEE journal for a possible publication

Sphere Precoding for Robust Near-Field Communications

Authors: Hao Luo, Yu Zhang, Ahmed Alkhateeb

Abstract: Near-field communication with large antenna arrays promises significant beamforming and multiplexing gains. These communication links, however, are very sensitive to user mobility as any small change in the user position may suddenly drop the signal power. This leads to critical challenges for the robustness of these near-field communication systems. In this paper, we propose \textit{sphere precod… ▽ More Near-field communication with large antenna arrays promises significant beamforming and multiplexing gains. These communication links, however, are very sensitive to user mobility as any small change in the user position may suddenly drop the signal power. This leads to critical challenges for the robustness of these near-field communication systems. In this paper, we propose \textit{sphere precoding}, which is a robust precoding design to address user mobility in near-field communications. To gain insights into the spatial correlation of near-field channels, we extend the one-ring channel model to what we call one-sphere channel model and derive the channel covariance considering user mobility. Based on the one-sphere channel model, a robust precoding design problem is defined to optimize the minimum signal-to-interference-plus-noise ratio (SINR) satisfaction probability among mobile users. By utilizing the eigen structure of channel covariance, we further design a relaxed convex problem to approximate the solution of the original non-convex problem. The low-complexity solution effectively shapes a sphere that maintains the signal power for the target user and also nulls its interference within spheres around the other users. Simulation results highlight the efficacy of the proposed solution in achieving robust precoding yet high achievable rates in near-field communication systems. △ Less

Submitted 9 March, 2025; originally announced March 2025.

Comments: The code for sphere precoding will be available on the Wireless Intelligence Lab website: https://www.wi-lab.net/

Hybrid MIMO in the Upper Mid-Band: Architectures, Processing, and Energy Efficiency

Authors: Marouan Mizmizi, Ahmed Alkhateeb, Umberto Spagnolini

Abstract: As 6G networks evolve, the upper mid-band spectrum (7 GHz to 24 GHz), or frequency range 3 (FR3), is emerging as a promising balance between the coverage offered by sub-6 GHz bands and the high-capacity of millimeter wave (mmWave) frequencies. This paper explores the structure of FR3 hybrid MIMO systems and proposes two architectural classes: Frequency Integrated (FI) and Frequency Partitioned (FP… ▽ More As 6G networks evolve, the upper mid-band spectrum (7 GHz to 24 GHz), or frequency range 3 (FR3), is emerging as a promising balance between the coverage offered by sub-6 GHz bands and the high-capacity of millimeter wave (mmWave) frequencies. This paper explores the structure of FR3 hybrid MIMO systems and proposes two architectural classes: Frequency Integrated (FI) and Frequency Partitioned (FP). FI architectures enhance spectral efficiency by exploiting multiple sub-bands parallelism, while FP architectures dynamically allocate sub-band access according to specific application requirements. Additionally, two approaches, fully digital (FD) and hybrid analog-digital (HAD), are considered, comparing shared (SRF) versus dedicated RF (DRF) chain configurations. Herein signal processing solutions are investigated, particularly for an uplink multi-user scenario with power control optimization. Results demonstrate that SRF and DRF architectures achieve comparable spectral efficiency; however, SRF structures consume nearly half the power of DRF in the considered setup. While FD architectures provide higher spectral efficiency, they do so at the cost of increased power consumption compared to HAD. Additionally, FI architectures show slightly greater power consumption compared to FP; however, they provide a significant benefit in spectral efficiency (over 4 x), emphasizing an important trade-off in FR3 engineering. △ Less

Submitted 3 March, 2025; originally announced March 2025.

Digital Twin Aided Channel Estimation: Zone-Specific Subspace Prediction and Calibration

Authors: Sadjad Alikhani, Ahmed Alkhateeb

Abstract: Effective channel estimation in sparse and high-dimensional environments is essential for next-generation wireless systems, particularly in large-scale MIMO deployments. This paper introduces a novel framework that leverages digital twins (DTs) as priors to enable efficient zone-specific subspace-based channel estimation (CE). Subspace-based CE significantly reduces feedback overhead by focusing o… ▽ More Effective channel estimation in sparse and high-dimensional environments is essential for next-generation wireless systems, particularly in large-scale MIMO deployments. This paper introduces a novel framework that leverages digital twins (DTs) as priors to enable efficient zone-specific subspace-based channel estimation (CE). Subspace-based CE significantly reduces feedback overhead by focusing on the dominant channel components, exploiting sparsity in the angular domain while preserving estimation accuracy. While DT channels may exhibit inaccuracies, their coarse-grained subspaces provide a powerful starting point, reducing the search space and accelerating convergence. The framework employs a two-step clustering process on the Grassmann manifold, combined with reinforcement learning (RL), to iteratively calibrate subspaces and align them with real-world counterparts. Simulations show that digital twins not only enable near-optimal performance but also enhance the accuracy of subspace calibration through RL, highlighting their potential as a step towards learnable digital twins. △ Less

Submitted 8 April, 2025; v1 submitted 5 January, 2025; originally announced January 2025.

Comments: Dataset and code files are available on the WI-Lab website: https://www.wi-lab.net/research/

Integrated Sensing and Communications in Downlink FDD MIMO without CSI Feedback

Authors: Namhyun Kim, Juntaek Han, Jinseok Choi, Ahmed Alkhateeb, Chan-Byoung Chae, Jeonghun Park

Abstract: In this paper, we propose a precoding framework for frequency division duplex (FDD) integrated sensing and communication (ISAC) systems with multiple-input multiple-output (MIMO). Specifically, we aim to maximize ergodic sum spectral efficiency (SE) while satisfying a sensing beam pattern constraint defined by the mean squared error (MSE). Our method reconstructs downlink (DL) channel state inform… ▽ More In this paper, we propose a precoding framework for frequency division duplex (FDD) integrated sensing and communication (ISAC) systems with multiple-input multiple-output (MIMO). Specifically, we aim to maximize ergodic sum spectral efficiency (SE) while satisfying a sensing beam pattern constraint defined by the mean squared error (MSE). Our method reconstructs downlink (DL) channel state information (CSI) from uplink (UL) training signals using partial reciprocity, eliminating the need for CSI feedback. To obtain the error covariance matrix of the reconstructed DL CSI, we devise an observed Fisher information-based estimation technique. Leveraging this, to mitigate interference caused by imperfect DL CSI reconstruction and sensing operations, we propose a rate-splitting multiple access (RSMA) aided precoder optimization method. This method jointly updates the precoding vector and Lagrange multipliers by solving the nonlinear eigenvalue problem with eigenvector dependency to maximize SE. The numerical results show that the proposed design achieves precise beam pattern control, maximizes SE, and significantly improves the sensing-communication trade-off compared to the state-of-the-art methods in FDD ISAC scenarios. △ Less

Submitted 10 June, 2025; v1 submitted 17 December, 2024; originally announced December 2024.

Comments: submitted to possible IEEE publication

Digital Twin Assisted Beamforming Design for Integrated Sensing and Communication Systems

Authors: Shuaifeng Jiang, Ahmed Alkhateeb

Abstract: This paper explores a novel research direction where a digital twin is leveraged to assist the beamforming design for an integrated sensing and communication (ISAC) system. In this setup, a base station designs joint communication and sensing beamforming to serve the communication user and detect the sensing target concurrently. Utilizing the electromagnetic (EM) 3D model of the environment and ra… ▽ More This paper explores a novel research direction where a digital twin is leveraged to assist the beamforming design for an integrated sensing and communication (ISAC) system. In this setup, a base station designs joint communication and sensing beamforming to serve the communication user and detect the sensing target concurrently. Utilizing the electromagnetic (EM) 3D model of the environment and ray tracing, the digital twin can provide various information, e.g., propagation path parameters and wireless channels, to aid communication and sensing systems. More specifically, our digital twin-based beamforming design first leverages the environment EM 3D model and ray tracing to (i) predict the directions of the line-of-sight (LoS) and non-line-of-sight (NLoS) sensing channel paths and (ii) identify the dominant one among these sensing channel paths. Then, to optimize the joint sensing and communication beam, we maximize the sensing signal-to-noise ratio (SNR) on the dominant sensing channel component while satisfying a minimum communication signal-to-interference-plus-noise ratio (SINR) requirement. Simulation results show that the proposed digital twin-assisted beamforming design achieves near-optimal target sensing SNR in both LoS and NLoS dominant areas, while ensuring the required SINR for the communication user. This highlights the potential of leveraging digital twins to assist ISAC systems. △ Less

Submitted 9 December, 2024; originally announced December 2024.

Comments: Presented at Asilomar 2024. Code and dataset will be available on the paper page: https://www.wi-lab.net/research/digital-twin-assisted-beamforming-design-for-integrated-sensing-and-communication-systems/

A Dataset Similarity Evaluation Framework for Wireless Communications and Sensing

Authors: Joao Morais, Sadjad Alikhani, Akshay Malhotra, Shahab Hamidi-Rad, Ahmed Alkhateeb

Abstract: This paper introduces a task-specific, model-agnostic framework for evaluating dataset similarity, providing a means to assess and compare dataset realism and quality. Such a framework is crucial for augmenting real-world data, improving benchmarking, and making informed retraining decisions when adapting to new deployment settings, such as different sites or frequency bands. The proposed framewor… ▽ More This paper introduces a task-specific, model-agnostic framework for evaluating dataset similarity, providing a means to assess and compare dataset realism and quality. Such a framework is crucial for augmenting real-world data, improving benchmarking, and making informed retraining decisions when adapting to new deployment settings, such as different sites or frequency bands. The proposed framework is employed to design metrics based on UMAP topology-preserving dimensionality reduction, leveraging Wasserstein and Euclidean distances on latent space KNN clusters. The designed metrics show correlations above 0.85 between dataset distances and model performances on a channel state information compression unsupervised machine learning task leveraging autoencoder architectures. The results show that the designed metrics outperform traditional methods. △ Less

Submitted 7 December, 2024; originally announced December 2024.

Sensing-Aided 6G Drone Communications: Real-World Datasets and Demonstration

Authors: Gouranga Charan, Ahmed Alkhateeb

Abstract: In the advent of next-generation wireless communication, millimeter-wave (mmWave) and terahertz (THz) technologies are pivotal for their high data rate capabilities. However, their reliance on large antenna arrays and narrow directive beams for ensuring adequate receive signal power introduces significant beam training overheads. This becomes particularly challenging in supporting highly-mobile ap… ▽ More In the advent of next-generation wireless communication, millimeter-wave (mmWave) and terahertz (THz) technologies are pivotal for their high data rate capabilities. However, their reliance on large antenna arrays and narrow directive beams for ensuring adequate receive signal power introduces significant beam training overheads. This becomes particularly challenging in supporting highly-mobile applications such as drone communication, where the dynamic nature of drones demands frequent beam alignment to maintain connectivity. Addressing this critical bottleneck, our paper introduces a novel machine learning-based framework that leverages multi-modal sensory data, including visual and positional information, to expedite and refine mmWave/THz beam prediction. Unlike conventional approaches that solely depend on exhaustive beam training methods, our solution incorporates additional layers of contextual data to accurately predict beam directions, significantly mitigating the training overhead. Additionally, our framework is capable of predicting future beam alignments ahead of time. This feature enhances the system's responsiveness and reliability by addressing the challenges posed by the drones' mobility and the computational delays encountered in real-time processing. This capability for advanced beam tracking asserts a critical advancement in maintaining seamless connectivity for highly-mobile drones. We validate our approach through comprehensive evaluations on a unique, real-world mmWave drone communication dataset, which integrates concurrent camera visuals, practical GPS coordinates, and mmWave beam training data... △ Less

Submitted 5 December, 2024; originally announced December 2024.

Comments: Dataset and codebase are available on the DeepSense 6G website: https://www.deepsense6g.net/

Is JPEG AI going to change image forensics?

Authors: Edoardo Daniele Cannas, Sara Mandelli, Nataša Popović, Ayman Alkhateeb, Alessandro Gnutti, Paolo Bestagini, Stefano Tubaro

Abstract: In this paper, we investigate the counter-forensic effects of the new JPEG AI standard based on neural image compression, focusing on two critical areas: deepfake image detection and image splicing localization. Neural image compression leverages advanced neural network algorithms to achieve higher compression rates while maintaining image quality. However, it introduces artifacts that closely res… ▽ More In this paper, we investigate the counter-forensic effects of the new JPEG AI standard based on neural image compression, focusing on two critical areas: deepfake image detection and image splicing localization. Neural image compression leverages advanced neural network algorithms to achieve higher compression rates while maintaining image quality. However, it introduces artifacts that closely resemble those generated by image synthesis techniques and image splicing pipelines, complicating the work of researchers when discriminating pristine from manipulated content. We comprehensively analyze JPEG AI's counter-forensic effects through extensive experiments on several state-of-the-art detectors and datasets. Our results demonstrate a reduction in the performance of leading forensic detectors when analyzing content processed through JPEG AI. By exposing the vulnerabilities of the available forensic tools, we aim to raise the urgent need for multimedia forensics researchers to include JPEG AI images in their experimental setups and develop robust forensic techniques to distinguish between neural compression artifacts and actual manipulations. △ Less

Submitted 18 March, 2025; v1 submitted 4 December, 2024; originally announced December 2024.

Large Wireless Model (LWM): A Foundation Model for Wireless Channels

Authors: Sadjad Alikhani, Gouranga Charan, Ahmed Alkhateeb

Abstract: This paper presents Large Wireless Model (LWM) -- the world's first foundation model for wireless channels. Designed as a task-agnostic model, LWM generates universal, rich, contextualized channel embeddings (features) that potentially enhance performance across a wide range of downstream tasks in wireless communication and sensing systems. Towards this objective, LWM, which has a transformer-base… ▽ More This paper presents Large Wireless Model (LWM) -- the world's first foundation model for wireless channels. Designed as a task-agnostic model, LWM generates universal, rich, contextualized channel embeddings (features) that potentially enhance performance across a wide range of downstream tasks in wireless communication and sensing systems. Towards this objective, LWM, which has a transformer-based architecture, was pre-trained in a self-supervised manner on large-scale wireless channel datasets. Our results show consistent improvements in downstream tasks when using the LWM embeddings compared to raw channel representations, especially in scenarios with high-complexity machine learning tasks and limited training datasets. This LWM's ability to learn from large-scale wireless data opens a promising direction for intelligent systems that can efficiently adapt to diverse tasks with limited data, paving the way for addressing key challenges in wireless communication and sensing systems. △ Less

Submitted 7 April, 2025; v1 submitted 13 November, 2024; originally announced November 2024.

Comments: The LWM model and relevant scripts are available on the LWM website: https://lwm-wireless.net/

Enabling ISAC in Real World: Beam-Based User Identification with Machine Learning

Authors: Umut Demirhan, Ahmed Alkhateeb

Abstract: Leveraging perception from radar data can assist multiple communication tasks, especially in highly-mobile and large-scale MIMO systems. One particular challenge, however, is how to distinguish the communication user (object) from the other mobile objects in the sensing scene. This paper formulates this \textit{user identification} problem and develops two solutions, a baseline model-based solutio… ▽ More Leveraging perception from radar data can assist multiple communication tasks, especially in highly-mobile and large-scale MIMO systems. One particular challenge, however, is how to distinguish the communication user (object) from the other mobile objects in the sensing scene. This paper formulates this \textit{user identification} problem and develops two solutions, a baseline model-based solution that maps the objects angles from the radar scene to communication beams and a scalable deep learning solution that is agnostic to the number of candidate objects. Using the DeepSense 6G dataset, which have real-world measurements, the developed deep learning approach achieves more than $93.4\%$ communication user identification accuracy, highlighting a promising path for enabling integrated radar-communication applications in the real world. △ Less

Submitted 10 November, 2024; originally announced November 2024.

Comments: Codebase and datasets are available on the DeepSense website: https://www.deepsense6g.net/

Corrections to "Computer Vision Aided mmWave Beam Alignment in V2X Communications"

Authors: Weihua Xu, Feifei Gao, Xiaoming Tao, Jianhua Zhang, Ahmed Alkhateeb

Abstract: In this document, we revise the results of [1] based on more reasonable assumptions regarding data shuffling and parameter setup of deep neural networks (DNNs). Thus, the simulation results can now more reasonably demonstrate the performance of both the proposed and compared beam alignment methods. We revise the simulation steps and make moderate modifications to the design of the vehicle distribu… ▽ More In this document, we revise the results of [1] based on more reasonable assumptions regarding data shuffling and parameter setup of deep neural networks (DNNs). Thus, the simulation results can now more reasonably demonstrate the performance of both the proposed and compared beam alignment methods. We revise the simulation steps and make moderate modifications to the design of the vehicle distribution feature (VDF) for the proposed vision based beam alignment when the MS location is available (VBALA). Specifically, we replace the 2D grids of the VDF with 3D grids and utilize the vehicle locations to expand the dimensions of the VDF. Then, we revise the simulation results of Fig. 11, Fig. 12, Fig. 13, Fig. 14, and Fig. 15 in [1] to reaffirm the validity of the conclusions. △ Less

Submitted 1 February, 2025; v1 submitted 8 October, 2024; originally announced October 2024.

Comments: 3 pages, 6 figures

Learning Beamforming in Cell-Free Massive MIMO ISAC Systems

Authors: Umut Demirhan, Ahmed Alkhateeb

Abstract: Beamforming design is critical for the efficient operation of integrated sensing and communication (ISAC) MIMO systems. ISAC beamforming design in cell-free massive MIMO systems, compared to colocated MIMO systems, is more challenging due to the additional complexity of the distributed large number of access points (APs). To address this problem, this paper first shows that graph neural networks (… ▽ More Beamforming design is critical for the efficient operation of integrated sensing and communication (ISAC) MIMO systems. ISAC beamforming design in cell-free massive MIMO systems, compared to colocated MIMO systems, is more challenging due to the additional complexity of the distributed large number of access points (APs). To address this problem, this paper first shows that graph neural networks (GNNs) are a suitable machine learning framework. Then, it develops a novel heterogeneous GNN model inspired by the specific characteristics of the cell-free ISAC MIMO systems. This model enables the low-complexity scaling of the cell-free ISAC system and does not require full retraining when additional APs are added or removed. Our results show that the proposed architecture can achieve near-optimal performance, and applies well to various network structures. △ Less

Submitted 26 September, 2024; originally announced September 2024.

Comments: Accepted in IEEE SPAWC 2024. Code files will be available on the Wireless Intelligence Lab website: https://www.wi-lab.net/research/

Learnable Wireless Digital Twins: Reconstructing Electromagnetic Field with Neural Representations

Authors: Shuaifeng Jiang, Qi Qu, Xiaqing Pan, Abhishek Agrawal, Richard Newcombe, Ahmed Alkhateeb

Abstract: Fully harvesting the gain of multiple-input and multiple-output (MIMO) requires accurate channel information. However, conventional channel acquisition methods mainly rely on pilot training signals, resulting in significant training overheads (time, energy, spectrum). Digital twin-aided communications have been proposed in [1] to reduce or eliminate this overhead by approximating the real world wi… ▽ More Fully harvesting the gain of multiple-input and multiple-output (MIMO) requires accurate channel information. However, conventional channel acquisition methods mainly rely on pilot training signals, resulting in significant training overheads (time, energy, spectrum). Digital twin-aided communications have been proposed in [1] to reduce or eliminate this overhead by approximating the real world with a digital replica. However, how to implement a digital twin-aided communication system brings new challenges. In particular, how to model the 3D environment and the associated EM properties, as well as how to update the environment dynamics in a coherent manner. To address these challenges, motivated by the latest advancements in computer vision, 3D reconstruction and neural radiance field, we propose an end-to-end deep learning framework for future generation wireless systems that can reconstruct the 3D EM field covered by a wireless access point, based on widely available crowd-sourced world-locked wireless samples between the access point and the devices. This visionary framework is grounded in classical EM theory and employs deep learning models to learn the EM properties and interaction behaviors of the objects in the environment. Simulation results demonstrate that the proposed learnable digital twin can implicitly learn the EM properties of the objects, accurately predict wireless channels, and generalize to changes in the environment, highlighting the prospect of this novel direction for future generation wireless platforms. △ Less

Submitted 25 September, 2024; v1 submitted 4 September, 2024; originally announced September 2024.

Pixel-Level GPS Localization and Denoising using Computer Vision and 6G Communication Beams

Authors: Gouranga Charan, Tawfik Osman, Ahmed Alkhateeb

Abstract: Accurate localization is crucial for various applications, including autonomous vehicles and next-generation wireless networks. However, the reliability and precision of Global Navigation Satellite Systems (GNSS), such as the Global Positioning System (GPS), are compromised by multi-path errors and non-line-of-sight scenarios. This paper presents a novel approach to enhance GPS accuracy by combini… ▽ More Accurate localization is crucial for various applications, including autonomous vehicles and next-generation wireless networks. However, the reliability and precision of Global Navigation Satellite Systems (GNSS), such as the Global Positioning System (GPS), are compromised by multi-path errors and non-line-of-sight scenarios. This paper presents a novel approach to enhance GPS accuracy by combining visual data from RGB cameras with wireless signals captured at millimeter-wave (mmWave) and sub-terahertz (sub-THz) basestations. We propose a sensing-aided framework for (i) site-specific GPS data characterization and (ii) GPS position de-noising that utilizes multi-modal visual and wireless information. Our approach is validated in a realistic Vehicle-to-Infrastructure (V2I) scenario using a comprehensive real-world dataset, demonstrating a substantial reduction in localization error to sub-meter levels. This method represents a significant advancement in achieving precise localization, particularly beneficial for high-mobility applications in 5G and beyond networks. △ Less

Submitted 17 August, 2024; v1 submitted 28 July, 2024; originally announced July 2024.

Comments: Datasets and code files are available on the DeepSense website: https://deepsense6g.net/. To appear in IEEE GLOBECOM 2024

DeepSense-V2V: A Vehicle-to-Vehicle Multi-Modal Sensing, Localization, and Communications Dataset

Authors: Joao Morais, Gouranga Charan, Nikhil Srinivas, Ahmed Alkhateeb

Abstract: High data rate and low-latency vehicle-to-vehicle (V2V) communication are essential for future intelligent transport systems to enable coordination, enhance safety, and support distributed computing and intelligence requirements. Developing effective communication strategies, however, demands realistic test scenarios and datasets. This is important at the high-frequency bands where more spectrum i… ▽ More High data rate and low-latency vehicle-to-vehicle (V2V) communication are essential for future intelligent transport systems to enable coordination, enhance safety, and support distributed computing and intelligence requirements. Developing effective communication strategies, however, demands realistic test scenarios and datasets. This is important at the high-frequency bands where more spectrum is available, yet harvesting this bandwidth is challenged by the need for direction transmission and the sensitivity of signal propagation to blockages. This work presents the first large-scale multi-modal dataset for studying mmWave vehicle-to-vehicle communications. It presents a two-vehicle testbed that comprises data from a 360-degree camera, four radars, four 60 GHz phased arrays, a 3D lidar, and two precise GPSs. The dataset contains vehicles driving during the day and night for 120 km in intercity and rural settings, with speeds up to 100 km per hour. More than one million objects were detected across all images, from trucks to bicycles. This work further includes detailed dataset statistics that prove the coverage of various situations and highlights how this dataset can enable novel machine-learning applications. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Comments: 14 pages, 15 figures, 2 tables. The dataset is available on the DeepSense6G website: https://deepsense6g.net/

Digital Twin Aided RIS Communication: Robust Beamforming and Interference Management

Authors: Sadjad Alikhani, Ahmed Alkhateeb

Abstract: Reconfigurable intelligent surfaces (RISs) are envisioned to play a key role in future wireless communication networks. However, channel estimation in RIS-aided wireless networks is challenging due to their passive nature and the large number of reflective elements, leading to high channel estimation overhead. Additionally, conventional methods like beam sweeping, which do not rely on explicit cha… ▽ More Reconfigurable intelligent surfaces (RISs) are envisioned to play a key role in future wireless communication networks. However, channel estimation in RIS-aided wireless networks is challenging due to their passive nature and the large number of reflective elements, leading to high channel estimation overhead. Additionally, conventional methods like beam sweeping, which do not rely on explicit channel state information, often struggle in managing interference in multi-user networks. In this paper, we propose a novel approach that leverages digital twins (DTs) of the physical environments to approximate channels using electromagnetic 3D models and ray tracing, thus relaxing the need for channel estimation and extensive over-the-air computations in RIS-aided wireless networks. To address the digital twins channel approximation errors, we further refine this approach with a DT-specific robust transmission design that reliably meets minimum desired rates. The results show that our method secures these rates over 90% of the time, significantly outperforming beam sweeping, which achieves these rates less than 8% of the time due to its poor management of transmitting power and interference. △ Less

Submitted 19 June, 2024; v1 submitted 6 June, 2024; originally announced June 2024.

Comments: Dataset and code files will be available soon on the DeepMIMIO website: https://www.deepmimo.net

FDD Massive MIMO: How to Optimally Combine UL Pilot and Limited DL CSI Feedback?

Authors: Jungyeon Kim, Jinseok Choi, Jeonghun Park, Ahmed Alkhateeb, Namyoon Lee

Abstract: In frequency-division duplexing (FDD) multiple-input multiple-output (MIMO) systems, obtaining accurate downlink channel state information (CSI) for precoding is vastly challenging due to the tremendous feedback overhead with the growing number of antennas. Utilizing uplink pilots for downlink CSI estimation is a promising approach that can eliminate CSI feedback. However, the downlink CSI estimat… ▽ More In frequency-division duplexing (FDD) multiple-input multiple-output (MIMO) systems, obtaining accurate downlink channel state information (CSI) for precoding is vastly challenging due to the tremendous feedback overhead with the growing number of antennas. Utilizing uplink pilots for downlink CSI estimation is a promising approach that can eliminate CSI feedback. However, the downlink CSI estimation accuracy diminishes significantly as the number of channel paths increases, resulting in reduced spectral efficiency. In this paper, we demonstrate that achieving downlink spectral efficiency comparable to perfect CSI is feasible by combining uplink CSI with limited downlink CSI feedback information. Our proposed downlink CSI feedback strategy transmits quantized phase information of downlink channel paths, deviating from conventional limited methods. We put forth a mean square error (MSE)-optimal downlink channel reconstruction method by jointly exploiting the uplink CSI and the limited downlink CSI. Armed with the MSE-optimal estimator, we derive the MSE as a function of the number of feedback bits for phase quantization. Subsequently, we present an optimal feedback bit allocation method for minimizing the MSE in the reconstructed channel through phase quantization. Utilizing a robust downlink precoding technique, we establish that the proposed downlink channel reconstruction method is sufficient for attaining a sum-spectral efficiency comparable to perfect CSI. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 13 pages, 10 figures

Digital Twin Aided Compressive Sensing: Enabling Site-Specific MIMO Hybrid Precoding

Authors: Hao Luo, Ahmed Alkhateeb

Abstract: Compressive sensing is a promising solution for the channel estimation in multiple-input multiple-output (MIMO) systems with large antenna arrays and constrained hardware. Utilizing site-specific channel data from real-world systems, deep learning can be employed to learn the compressive sensing measurement vectors with minimum redundancy, thereby focusing sensing power on promising spatial direct… ▽ More Compressive sensing is a promising solution for the channel estimation in multiple-input multiple-output (MIMO) systems with large antenna arrays and constrained hardware. Utilizing site-specific channel data from real-world systems, deep learning can be employed to learn the compressive sensing measurement vectors with minimum redundancy, thereby focusing sensing power on promising spatial directions of the channel. Collecting real-world channel data, however, is challenging due to the high overhead resulting from the large number of antennas and hardware constraints. In this paper, we propose leveraging a site-specific digital twin to generate synthetic channel data, which shares a similar distribution with real-world data. The synthetic data is then used to train the deep learning models for learning measurement vectors and hybrid precoder/combiner design in an end-to-end manner. We further propose a model refinement approach to fine-tune the model pre-trained on the digital twin data with a small amount of real-world data. The evaluation results show that, by training the model on the digital twin data, the learned measurement vectors can be efficiently adapted to the environment geometry, leading to high performance of hybrid precoding for real-world deployments. Moreover, the model refinement approach can enable the digital twin aided model to achieve comparable performance to the model trained on the real-world dataset with a significantly reduced amount of real-world data. △ Less

Submitted 11 May, 2024; originally announced May 2024.

Comments: 7 pages, 5 figures

Digital Twins and Testbeds for Supporting AI Research with Autonomous Vehicle Networks

Authors: Anıl Gürses, Gautham Reddy, Saad Masrur, Özgür Özdemir, İsmail Güvenç, Mihail L. Sichitiu, Alphan Şahin, Ahmed Alkhateeb, Magreth Mushi, Rudra Dutta

Abstract: Digital twins (DTs), which are virtual environments that simulate, predict, and optimize the performance of their physical counterparts, hold great promise in revolutionizing next-generation wireless networks. While DTs have been extensively studied for wireless networks, their use in conjunction with autonomous vehicles featuring programmable mobility remains relatively under-explored. In this pa… ▽ More Digital twins (DTs), which are virtual environments that simulate, predict, and optimize the performance of their physical counterparts, hold great promise in revolutionizing next-generation wireless networks. While DTs have been extensively studied for wireless networks, their use in conjunction with autonomous vehicles featuring programmable mobility remains relatively under-explored. In this paper, we study DTs used as a development environment to design, deploy, and test artificial intelligence (AI) techniques that utilize real-world (RW) observations, e.g. radio key performance indicators, for vehicle trajectory and network optimization decisions in autonomous vehicle networks (AVN). We first compare and contrast the use of simulation, digital twin (software in the loop (SITL)), sandbox (hardware-in-the-loop (HITL)), and physical testbed (PT) environments for their suitability in developing and testing AI algorithms for AVNs. We then review various representative use cases of DTs for AVN scenarios. Finally, we provide an example from the NSF AERPAW platform where a DT is used to develop and test AI-aided solutions for autonomous unmanned aerial vehicles for localizing a signal source based solely on link quality measurements. Our results in the physical testbed show that SITL DTs, when supplemented with data from RW measurements and simulations, can serve as an ideal environment for developing and testing innovative AI solutions for AVNs. △ Less

Submitted 8 August, 2024; v1 submitted 1 April, 2024; originally announced April 2024.

Comments: 7 pages, 6 figures, Submitted to IEEE Communications Magazine

Site-Specific Beam Alignment in 6G via Deep Learning

Authors: Yuqiang Heng, Yu Zhang, Ahmed Alkhateeb, Jeffrey G. Andrews

Abstract: Beam alignment (BA) in modern millimeter wave standards such as 5G NR and WiGig (802.11ay) is based on exhaustive and/or hierarchical beam searches over pre-defined codebooks of wide and narrow beams. This approach is slow and bandwidth/power-intensive, and is a considerable hindrance to the wide deployment of millimeter wave bands. A new approach is needed as we move towards 6G. BA is a promising… ▽ More Beam alignment (BA) in modern millimeter wave standards such as 5G NR and WiGig (802.11ay) is based on exhaustive and/or hierarchical beam searches over pre-defined codebooks of wide and narrow beams. This approach is slow and bandwidth/power-intensive, and is a considerable hindrance to the wide deployment of millimeter wave bands. A new approach is needed as we move towards 6G. BA is a promising use case for deep learning (DL) in the 6G air interface, offering the possibility of automated custom tuning of the BA procedure for each cell based on its unique propagation environment and user equipment (UE) location patterns. We overview and advocate for such an approach in this paper, which we term site-specific beam alignment (SSBA). SSBA largely eliminates wasteful searches and allows UEs to be found much more quickly and reliably, without many of the drawbacks of other machine learning-aided approaches. We first overview and demonstrate new results on SSBA, then identify the key open challenges facing SSBA. △ Less

Submitted 24 March, 2024; originally announced March 2024.

Comments: Accepted for publication in the IEEE Communications Magazine

Localization in Digital Twin MIMO Networks: A Case for Massive Fingerprinting

Authors: João Morais, Ahmed Alkhateeb

Abstract: Localization in outdoor wireless systems typically requires transmitting specific reference signals to estimate distance (trilateration methods) or angle (triangulation methods). These cause overhead on communication, need a LoS link to work well, and require multiple base stations, often imposing synchronization or specific hardware requirements. Fingerprinting has none of these drawbacks, but bu… ▽ More Localization in outdoor wireless systems typically requires transmitting specific reference signals to estimate distance (trilateration methods) or angle (triangulation methods). These cause overhead on communication, need a LoS link to work well, and require multiple base stations, often imposing synchronization or specific hardware requirements. Fingerprinting has none of these drawbacks, but building its database requires high human effort to collect real-world measurements. For a long time, this issue limited the size of databases and thus their performance. This work proposes significantly reducing human effort in building fingerprinting databases by populating them with \textit{digital twin RF maps}. These RF maps are built from ray-tracing simulations on a digital replica of the environment across several frequency bands and beamforming configurations. Online user fingerprints are then matched against this spatial database. The approach was evaluated with practical simulations using realistic propagation models and user measurements. Our experiments show sub-meter localization errors on a NLoS location 95\% of the time using sensible user measurement report sizes. Results highlight the promising potential of the proposed digital twin approach for ubiquitous wide-area 6G localization. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: To appear in ICC 2024. The Dataset and code will be available soon on the DeepMIMO and DeepVerse websites https://www.deepmimo.net/ https://www.deepverse6g.net/

Digital Twin Aided Massive MIMO: CSI Compression and Feedback

Authors: Shuaifeng Jiang, Ahmed Alkhateeb

Abstract: Deep learning (DL) approaches have demonstrated high performance in compressing and reconstructing the channel state information (CSI) and reducing the CSI feedback overhead in massive MIMO systems. One key challenge, however, with the DL approaches is the demand for extensive training data. Collecting this real-world CSI data incurs significant overhead that hinders the DL approaches from scaling… ▽ More Deep learning (DL) approaches have demonstrated high performance in compressing and reconstructing the channel state information (CSI) and reducing the CSI feedback overhead in massive MIMO systems. One key challenge, however, with the DL approaches is the demand for extensive training data. Collecting this real-world CSI data incurs significant overhead that hinders the DL approaches from scaling to a large number of communication sites. To address this challenge, we propose a novel direction that utilizes site-specific \textit{digital twins} to aid the training of DL models. The proposed digital twin approach generates site-specific synthetic CSI data from the EM 3D model and ray tracing, which can then be used to train the DL model without real-world data collection. To further improve the performance, we adopt online data selection to refine the DL model training with a small real-world CSI dataset. Results show that a DL model trained solely on the digital twin data can achieve high performance when tested in a real-world deployment. Further, leveraging domain adaptation techniques, the proposed approach requires orders of magnitude less real-world data to approach the same performance of the model trained completely on a real-world CSI dataset. △ Less

Submitted 29 February, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: Accepted in ICC 2024. Dataset and code files will be available soon on the DeepMIMO website https://www.deepmimo.net/

Environment Semantic Communication: Enabling Distributed Sensing Aided Networks

Authors: Shoaib Imran, Gouranga Charan, Ahmed Alkhateeb

Abstract: Millimeter-wave (mmWave) and terahertz (THz) communication systems require large antenna arrays and use narrow directive beams to ensure sufficient receive signal power. However, selecting the optimal beams for these large antenna arrays incurs a significant beam training overhead, making it challenging to support applications involving high mobility. In recent years, machine learning (ML) solutio… ▽ More Millimeter-wave (mmWave) and terahertz (THz) communication systems require large antenna arrays and use narrow directive beams to ensure sufficient receive signal power. However, selecting the optimal beams for these large antenna arrays incurs a significant beam training overhead, making it challenging to support applications involving high mobility. In recent years, machine learning (ML) solutions have shown promising results in reducing the beam training overhead by utilizing various sensing modalities such as GPS position and RGB images. However, the existing approaches are mainly limited to scenarios with only a single object of interest present in the wireless environment and focus only on co-located sensing, where all the sensors are installed at the communication terminal. This brings key challenges such as the limited sensing coverage compared to the coverage of the communication system and the difficulty in handling non-line-of-sight scenarios. To overcome these limitations, our paper proposes the deployment of multiple distributed sensing nodes, each equipped with an RGB camera. These nodes focus on extracting environmental semantics from the captured RGB images. The semantic data, rather than the raw images, are then transmitted to the basestation. This strategy significantly alleviates the overhead associated with the data storage and transmission of the raw images. Furthermore, semantic communication enhances the system's adaptability and responsiveness to dynamic environments, allowing for prioritization and transmission of contextually relevant information. Experimental results on the DeepSense 6G dataset demonstrate the effectiveness of the proposed solution in reducing the sensing data transmission overhead while accurately predicting the optimal beams in realistic communication environments. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Comments: The code and dataset are available on the DeepSense website https://www.deepsense6g.net/

Joint and Robust Beamforming Framework for Integrated Sensing and Communication Systems

Authors: Jinseok Choi, Jeonghun Park, Namyoon Lee, Ahmed Alkhateeb

Abstract: Integrated sensing and communication (ISAC) is widely recognized as a fundamental enabler for future wireless communications. In this paper, we present a joint communication and radar beamforming framework for maximizing a sum spectral efficiency (SE) while guaranteeing desired radar performance with imperfect channel state information (CSI) in multi-user and multi-target ISAC systems. To this end… ▽ More Integrated sensing and communication (ISAC) is widely recognized as a fundamental enabler for future wireless communications. In this paper, we present a joint communication and radar beamforming framework for maximizing a sum spectral efficiency (SE) while guaranteeing desired radar performance with imperfect channel state information (CSI) in multi-user and multi-target ISAC systems. To this end, we adopt either a radar transmit beam mean square error (MSE) or receive signal-to-clutter-plus-noise ratio (SCNR) as a radar performance constraint of a sum SE maximization problem. To resolve inherent challenges such as non-convexity and imperfect CSI, we reformulate the problems and identify first-order optimality conditions for the joint radar and communication beamformer. Turning the condition to a nonlinear eigenvalue problem with eigenvector dependency (NEPv), we develop an alternating method which finds the joint beamformer through power iteration and a Lagrangian multiplier through binary search. The proposed framework encompasses both the radar metrics and is robust to channel estimation error with low complexity. Simulations validate the proposed methods. In particular, we observe that the MSE and SCNR constraints exhibit complementary performance depending on the operating environment, which manifests the importance of the proposed comprehensive and robust optimization framework. △ Less

Submitted 3 September, 2024; v1 submitted 14 February, 2024; originally announced February 2024.

Comments: accepted to IEEE Transactions on Wireless Communications

Integrated Imaging and Communication with Reconfigurable Intelligent Surfaces

Authors: Hao Luo, Ahmed Alkhateeb

Abstract: Reconfigurable intelligent surfaces, with their large number of antennas, offer an interesting opportunity for high spatial-resolution imaging. In this paper, we propose a novel RIS-aided integrated imaging and communication system that can reduce the RIS beam training overhead for communication by leveraging the imaging of the surrounding environment. In particular, using the RIS as a wireless im… ▽ More Reconfigurable intelligent surfaces, with their large number of antennas, offer an interesting opportunity for high spatial-resolution imaging. In this paper, we propose a novel RIS-aided integrated imaging and communication system that can reduce the RIS beam training overhead for communication by leveraging the imaging of the surrounding environment. In particular, using the RIS as a wireless imaging device, our system constructs the scene depth map of the environment, including the mobile user. Then, we develop a user detection algorithm that subtracts the background and extracts the mobile user attributes from the depth map. These attributes are then utilized to design the RIS interaction vector and the beam selection strategy with low overhead. Simulation results show that the proposed approach can achieve comparable beamforming gain to the optimal/exhaustive beam selection solution while requiring 1000 times less beam training overhead. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures. To appear in Asilomar 2023

ISAC with Backscattering RFID Tags: Joint Beamforming Design

Authors: Hao Luo, Umut Demirhan, Ahmed Alkhateeb

Abstract: In this paper, we explore an integrated sensing and communication (ISAC) system with backscattering RFID tags. In this setup, an access point employs a communication beam to serve a user while leveraging a sensing beam to detect an RFID tag. Under the total transmit power constraint of the system, our objective is to design sensing and communication beams by considering the tag detection and commu… ▽ More In this paper, we explore an integrated sensing and communication (ISAC) system with backscattering RFID tags. In this setup, an access point employs a communication beam to serve a user while leveraging a sensing beam to detect an RFID tag. Under the total transmit power constraint of the system, our objective is to design sensing and communication beams by considering the tag detection and communication requirements. First, we adopt zero-forcing to design the beamforming vectors, followed by solving a convex optimization problem to determine the power allocation between sensing and communication. Then, we study a joint beamforming design problem with the goal of minimizing the total transmit power while satisfying the tag detection and communication requirements. To resolve this, we re-formulate the non-convex constraints into convex second-order cone constraints. The simulation results demonstrate that, under different communication SINR requirements, joint beamforming optimization outperforms the zero-forcing-based method in terms of achievable detection distance, offering a promising approach for the ISAC-backscattering systems. △ Less

Submitted 31 January, 2024; v1 submitted 18 January, 2024; originally announced January 2024.

Comments: 5 pages, 5 figures. To appear in IEEE ICC 2024

Decentralized Interference-Aware Codebook Learning in Millimeter Wave MIMO Systems

Authors: Yu Zhang, Ahmed Alkhateeb

Abstract: Beam codebooks are integral components of the future millimeter wave (mmWave) multiple input multiple output (MIMO) system to relax the reliance on the instantaneous channel state information (CSI). The design of these codebooks, therefore, becomes one of the fundamental problems for these systems, and the well-designed codebooks play key roles in enabling efficient and reliable communications. Pr… ▽ More Beam codebooks are integral components of the future millimeter wave (mmWave) multiple input multiple output (MIMO) system to relax the reliance on the instantaneous channel state information (CSI). The design of these codebooks, therefore, becomes one of the fundamental problems for these systems, and the well-designed codebooks play key roles in enabling efficient and reliable communications. Prior work has primarily focused on the codebook learning problem within a single cell/network and under stationary interference. In this work, we generalize the interference-aware codebook learning problem to networks with multiple cells/basestations. One of the key differences compared to the single-cell codebook learning problem is that the underlying environment becomes non-stationary, as the behavior of one base station will influence the learning of the others. Moreover, to encompass some of the challenging scenarios, information exchange between the different learning nodes is not allowed, which leads to a fully decentralized system with significantly increased learning difficulties. To tackle the non-stationarity, the averaging of the measurements is used to estimate the interference nulling performance of a particular beam, based on which a decision rule is provided. Furthermore, we theoretically justify the adoption of such estimator and prove that it is a sufficient statistic for the underlying quantity of interest in an asymptotic sense. Finally, a novel reward function based on averaging is proposed to fully decouple the learning of the multiple agents running at different nodes. Simulation results show that the developed solution is capable of learning well-shaped codebook patterns for different networks that significantly suppress the interference without information exchange, highlighting ... △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: Dataset and code files are available on the DeepMIMO website https://www.deepmimo.net/

Zone-Specific CSI Feedback for Massive MIMO: A Situation-Aware Deep Learning Approach

Authors: Yu Zhang, Ahmed Alkhateeb

Abstract: Massive MIMO basestations, operating with frequency-division duplexing (FDD), require the users to feedback their channel state information (CSI) in order to design the precoding matrices. Given the powerful capabilities of deep neural networks in learning quantization codebooks, utilizing these networks in compressing the channels and reducing the massive MIMO CSI feedback overhead has recently g… ▽ More Massive MIMO basestations, operating with frequency-division duplexing (FDD), require the users to feedback their channel state information (CSI) in order to design the precoding matrices. Given the powerful capabilities of deep neural networks in learning quantization codebooks, utilizing these networks in compressing the channels and reducing the massive MIMO CSI feedback overhead has recently gained increased interest. Learning one model, however, for the full cell or sector may not be optimal as the channel distribution could change significantly from one \textit{zone} (an area or region) to another. In this letter, we introduce the concept of \textit{zone-specific} CSI feedback. By partitioning the site space into multiple channel zones, the underlying channel distribution can be efficiently leveraged to reduce the CSI feedback. This concept leverages the implicit or explicit user position information to select the right zone-specific model and its parameters. To facilitate the evaluation of associated overhead, we introduce two novel metrics named \textit{model parameters transmission rate} (MPTR) and \textit{model parameters update rate} (MPUR). They jointly provide important insights and guidance for the system design and deployment. Simulation results show that significant gains could be achieved by the proposed framework. For example, using the large-scale Boston downtown scenario of DeepMIMO, the proposed zone-specific CSI feedback approach can on average achieve around 6dB NMSE gain compared to the other solutions, while keeping the same model complexity. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Comments: Datasets and code files will be available on the DeepMIMO website: https://www.deepmimo.net/

Multiple Access Techniques for Intelligent and Multi-Functional 6G: Tutorial, Survey, and Outlook

Authors: Bruno Clerckx, Yijie Mao, Zhaohui Yang, Mingzhe Chen, Ahmed Alkhateeb, Liang Liu, Min Qiu, Jinhong Yuan, Vincent W. S. Wong, Juan Montojo

Abstract: Multiple access (MA) is a crucial part of any wireless system and refers to techniques that make use of the resource dimensions to serve multiple users/devices/machines/services, ideally in the most efficient way. Given the needs of multi-functional wireless networks for integrated communications, sensing, localization, computing, coupled with the surge of machine learning / artificial intelligenc… ▽ More Multiple access (MA) is a crucial part of any wireless system and refers to techniques that make use of the resource dimensions to serve multiple users/devices/machines/services, ideally in the most efficient way. Given the needs of multi-functional wireless networks for integrated communications, sensing, localization, computing, coupled with the surge of machine learning / artificial intelligence (AI) in wireless networks, MA techniques are expected to experience a paradigm shift in 6G and beyond. In this paper, we provide a tutorial, survey and outlook of past, emerging and future MA techniques and pay a particular attention to how wireless network intelligence and multi-functionality will lead to a re-thinking of those techniques. The paper starts with an overview of orthogonal, physical layer multicasting, space domain, power domain, ratesplitting, code domain MAs, and other domains, and highlight the importance of researching universal multiple access to shrink instead of grow the knowledge tree of MA schemes by providing a unified understanding of MA schemes across all resource dimensions. It then jumps into rethinking MA schemes in the era of wireless network intelligence, covering AI for MA such as AI-empowered resource allocation, optimization, channel estimation, receiver designs, user behavior predictions, and MA for AI such as federated learning/edge intelligence and over the air computation. We then discuss MA for network multi-functionality and the interplay between MA and integrated sensing, localization, and communications. We finish with studying MA for emerging intelligent applications before presenting a roadmap toward 6G standardization. We also point out numerous directions that are promising for future research. △ Less

Submitted 2 January, 2024; originally announced January 2024.

Comments: submitted for publication in Proceedings of the IEEE

Vehicle Cameras Guide mmWave Beams: Approach and Real-World V2V Demonstration

Authors: Tawfik Osman, Gouranga Charan, Ahmed Alkhateeb

Abstract: Accurately aligning millimeter-wave (mmWave) and terahertz (THz) narrow beams is essential to satisfy reliability and high data rates of 5G and beyond wireless communication systems. However, achieving this objective is difficult, especially in vehicle-to-vehicle (V2V) communication scenarios, where both transmitter and receiver are constantly mobile. Recently, additional sensing modalities, such… ▽ More Accurately aligning millimeter-wave (mmWave) and terahertz (THz) narrow beams is essential to satisfy reliability and high data rates of 5G and beyond wireless communication systems. However, achieving this objective is difficult, especially in vehicle-to-vehicle (V2V) communication scenarios, where both transmitter and receiver are constantly mobile. Recently, additional sensing modalities, such as visual sensors, have attracted significant interest due to their capability to provide accurate information about the wireless environment. To that end, in this paper, we develop a deep learning solution for V2V scenarios to predict future beams using images from a 360 camera attached to the vehicle. The developed solution is evaluated on a real-world multi-modal mmWave V2V communication dataset comprising co-existing 360 camera and mmWave beam training data. The proposed vision-aided solution achieves $\approx 85\%$ top-5 beam prediction accuracy while significantly reducing the beam training overhead. This highlights the potential of utilizing vision for enabling highly-mobile V2V communications. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Comments: Dataset and code files are available on the DeepSense 6G website https://deepsense6g.net/

Camera Based mmWave Beam Prediction: Towards Multi-Candidate Real-World Scenarios

Authors: Gouranga Charan, Muhammad Alrabeiah, Tawfik Osman, Ahmed Alkhateeb

Abstract: Leveraging sensory information to aid the millimeter-wave (mmWave) and sub-terahertz (sub-THz) beam selection process is attracting increasing interest. This sensory data, captured for example by cameras at the basestations, has the potential of significantly reducing the beam sweeping overhead and enabling highly-mobile applications. The solutions developed so far, however, have mainly considered… ▽ More Leveraging sensory information to aid the millimeter-wave (mmWave) and sub-terahertz (sub-THz) beam selection process is attracting increasing interest. This sensory data, captured for example by cameras at the basestations, has the potential of significantly reducing the beam sweeping overhead and enabling highly-mobile applications. The solutions developed so far, however, have mainly considered single-candidate scenarios, i.e., scenarios with a single candidate user in the visual scene, and were evaluated using synthetic datasets. To address these limitations, this paper extensively investigates the sensing-aided beam prediction problem in a real-world multi-object vehicle-to-infrastructure (V2I) scenario and presents a comprehensive machine learning-based framework. In particular, this paper proposes to utilize visual and positional data to predict the optimal beam indices as an alternative to the conventional beam sweeping approaches. For this, a novel user (transmitter) identification solution has been developed, a key step in realizing sensing-aided multi-candidate and multi-user beam prediction solutions. The proposed solutions are evaluated on the large-scale real-world DeepSense $6$G dataset. Experimental results in realistic V2I communication scenarios indicate that the proposed solutions achieve close to $100\%$ top-5 beam prediction accuracy for the scenarios with single-user and close to $95\%$ top-5 beam prediction accuracy for multi-candidate scenarios. Furthermore, the proposed approach can identify the probable transmitting candidate with more than $93\%$ accuracy across the different scenarios. This highlights a promising approach for nearly eliminating the beam training overhead in mmWave/THz communication systems. △ Less

Submitted 13 August, 2023; originally announced August 2023.

Comments: Dataset and code files are available on the DeepSense 6G website https://deepsense6g.net/

Millimeter Wave V2V Beam Tracking using Radar: Algorithms and Real-World Demonstration

Authors: Hao Luo, Umut Demirhan, Ahmed Alkhateeb

Abstract: Utilizing radar sensing for assisting communication has attracted increasing interest thanks to its potential in dynamic environments. A particularly interesting problem for this approach appears in the vehicle-to-vehicle (V2V) millimeter wave and terahertz communication scenarios, where the narrow beams change with the movement of both vehicles. To address this problem, in this work, we develop a… ▽ More Utilizing radar sensing for assisting communication has attracted increasing interest thanks to its potential in dynamic environments. A particularly interesting problem for this approach appears in the vehicle-to-vehicle (V2V) millimeter wave and terahertz communication scenarios, where the narrow beams change with the movement of both vehicles. To address this problem, in this work, we develop a radar-aided beam-tracking framework, where a single initial beam and a set of radar measurements over a period of time are utilized to predict the future beams after this time duration. Within this framework, we develop two approaches with the combination of various degrees of radar signal processing and machine learning. To evaluate the feasibility of the solutions in a realistic scenario, we test their performance on a real-world V2V dataset. Our results indicated the importance of high angular resolution radar for this task and affirmed the potential of using radar for the V2V beam management problems. △ Less

Submitted 27 October, 2023; v1 submitted 3 August, 2023; originally announced August 2023.

Comments: 5 pages, 5 figures. To appear in EUSIPCO 2023. The dataset is available on the DeepSense 6G website http://deepsense6g.net/

Real-World Evaluation of Full-Duplex Millimeter Wave Communication Systems

Authors: Ian P. Roberts, Yu Zhang, Tawfik Osman, Ahmed Alkhateeb

Abstract: Noteworthy strides continue to be made in the development of full-duplex millimeter wave (mmWave) communication systems, but most of this progress has been built on theoretical models and validated through simulation. In this work, we conduct a long overdue real-world evaluation of full-duplex mmWave systems using off-the-shelf 60 GHz phased arrays. Using an experimental full-duplex base station,… ▽ More Noteworthy strides continue to be made in the development of full-duplex millimeter wave (mmWave) communication systems, but most of this progress has been built on theoretical models and validated through simulation. In this work, we conduct a long overdue real-world evaluation of full-duplex mmWave systems using off-the-shelf 60 GHz phased arrays. Using an experimental full-duplex base station, we collect over 200,000 measurements of self-interference by electronically sweeping its transmit and receive beams across a dense spatial profile, shedding light on the effects of the environment, array positioning, and beam steering direction. We then call attention to five key challenges faced by practical full-duplex mmWave systems and, with these in mind, propose a general framework for beamforming-based full-duplex solutions. Guided by this framework, we introduce a novel solution called STEER+, a more robust version of recent work called STEER, and experimentally evaluate both in a real-world setting with actual downlink and uplink users. Rather than purely minimize self-interference as with STEER, STEER+ makes use of additional measurements to maximize spectral efficiency, which proves to make it much less sensitive to one's choice of design parameters. We experimentally show that STEER+ can reliably reduce self-interference to near or below the noise floor while maintaining high SNR on the downlink and uplink, thus enabling full-duplex operation purely via beamforming. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Comments: This paper has been submitted to the IEEE for review and possible publication; copyright may change without notice

Vision Guided MIMO Radar Beamforming for Enhanced Vital Signs Detection in Crowds

Authors: Shuaifeng Jiang, Ahmed Alkhateeb, Daniel W. Bliss, Yu Rong

Abstract: Radar as a remote sensing technology has been used to analyze human activity for decades. Despite all the great features such as motion sensitivity, privacy preservation, penetrability, and more, radar has limited spatial degrees of freedom compared to optical sensors and thus makes it challenging to sense crowded environments without prior information. In this paper, we develop a novel dual-sensi… ▽ More Radar as a remote sensing technology has been used to analyze human activity for decades. Despite all the great features such as motion sensitivity, privacy preservation, penetrability, and more, radar has limited spatial degrees of freedom compared to optical sensors and thus makes it challenging to sense crowded environments without prior information. In this paper, we develop a novel dual-sensing system, in which a vision sensor is leveraged to guide digital beamforming in a multiple-input multiple-output (MIMO) radar. Also, we develop a calibration algorithm to align the two types of sensors and show that the calibrated dual system achieves about two centimeters precision in three-dimensional space within a field of view of $75^\circ$ by $65^\circ$ and for a range of two meters. Finally, we show that the proposed approach is capable of detecting the vital signs simultaneously for a group of closely spaced subjects, sitting and standing, in a cluttered environment, which highlights a promising direction for vital signs detection in realistic environments. △ Less

Submitted 18 June, 2023; originally announced June 2023.

Environment Semantic Aided Communication: A Real World Demonstration for Beam Prediction

Authors: Shoaib Imran, Gouranga Charan, Ahmed Alkhateeb

Abstract: Millimeter-wave (mmWave) and terahertz (THz) communication systems adopt large antenna arrays to ensure adequate receive signal power. However, adjusting the narrow beams of these antenna arrays typically incurs high beam training overhead that scales with the number of antennas. Recently proposed vision-aided beam prediction solutions, which utilize \textit{raw RGB images} captured at the basesta… ▽ More Millimeter-wave (mmWave) and terahertz (THz) communication systems adopt large antenna arrays to ensure adequate receive signal power. However, adjusting the narrow beams of these antenna arrays typically incurs high beam training overhead that scales with the number of antennas. Recently proposed vision-aided beam prediction solutions, which utilize \textit{raw RGB images} captured at the basestation to predict the optimal beams, have shown initial promising results. However, they still have a considerable computational complexity, limiting their adoption in the real world. To address these challenges, this paper focuses on developing and comparing various approaches that extract lightweight semantic information from the visual data. The results show that the proposed solutions can significantly decrease the computational requirements while achieving similar beam prediction accuracy compared to the previously proposed vision-aided solutions. △ Less

Submitted 13 February, 2023; originally announced February 2023.

Comments: Based on the DeepSense dataset https://deepsense6g.net/. arXiv admin note: text overlap with arXiv:2205.12187

A Digital Twin Assisted Framework for Interference Nulling in Millimeter Wave MIMO Systems

Authors: Yu Zhang, Tawfik Osman, Ahmed Alkhateeb

Abstract: Millimeter wave (mmWave) and terahertz MIMO systems rely on pre-defined beamforming codebooks for both initial access and data transmission. However, most of the existing codebooks adopt pre-defined beams that focus mainly on improving the gain of their target users, without taking interference into account, which could incur critical performance degradation in dense networks. To address this prob… ▽ More Millimeter wave (mmWave) and terahertz MIMO systems rely on pre-defined beamforming codebooks for both initial access and data transmission. However, most of the existing codebooks adopt pre-defined beams that focus mainly on improving the gain of their target users, without taking interference into account, which could incur critical performance degradation in dense networks. To address this problem, in this paper, we propose a sample-efficient digital twin-assisted beam pattern design framework that learns how to form the beam pattern to reject the signals from the interfering directions. The proposed approach does not require any explicit channel knowledge or any coordination with the interferers. The adoption of the digital twin improves the sample efficiency by better leveraging the underlying signal relationship and by incorporating a demand-based data acquisition strategy. Simulation results show that the developed signal model-based learning framework can significantly reduce the actual interaction with the radio environment (i.e., the number of measurements) compared to the model-unaware design, leading to a more practical and efficient interference-aware beam design approach. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2209.04509

Cell-Free ISAC MIMO Systems: Joint Sensing and Communication Beamforming

Authors: Umut Demirhan, Ahmed Alkhateeb

Abstract: This paper considers a cell-free integrated sensing and communication (ISAC) MIMO system, where distributed MIMO access points (APs) jointly serve the communication users and sense the target. For this setup, we derive a sensing SNR for multi-static sensing where both joint communication and sensing signals transmitted by different APs are utilized. With this sensing objective, we develop two base… ▽ More This paper considers a cell-free integrated sensing and communication (ISAC) MIMO system, where distributed MIMO access points (APs) jointly serve the communication users and sense the target. For this setup, we derive a sensing SNR for multi-static sensing where both joint communication and sensing signals transmitted by different APs are utilized. With this sensing objective, we develop two baseline approaches that separately design the sensing and communication beamforming vectors, namely communication-prioritized sensing beamforming and sensing-prioritized communication beamforming. Then, we consider the joint sensing and communication (JSC) beamforming design and derive the optimal structure of these beamforming vectors based on a max-min fairness formulation. In addition, considering any pre-determined JSC beam design, we devise a power allocation approach. The results show that the developed JSC beamforming is capable of achieving nearly the same communication signal-to-interference-plus-noise ratio (SINR) of the communication-prioritized sensing beamforming solution with almost the same sensing SNR of the sensing-prioritized communication beamforming approach. The proposed JSC beamforming optimization also provides a noticeable gain over the power allocation with regularized zero-forcing beamforming, yielding a promising strategy for cell-free ISAC MIMO systems. △ Less

Submitted 23 February, 2024; v1 submitted 26 January, 2023; originally announced January 2023.

Comments: Submitted to IEEE

Real-Time Digital Twins: Vision and Research Directions for 6G and Beyond

Authors: Ahmed Alkhateeb, Shuaifeng Jiang, Gouranga Charan

Abstract: This article presents a vision where \textit{real-time} digital twins of the physical wireless environments are continuously updated using multi-modal sensing data from the distributed infrastructure and user devices, and are used to make communication and sensing decisions. This vision is mainly enabled by the advances in precise 3D maps, multi-modal sensing, ray-tracing computations, and machine… ▽ More This article presents a vision where \textit{real-time} digital twins of the physical wireless environments are continuously updated using multi-modal sensing data from the distributed infrastructure and user devices, and are used to make communication and sensing decisions. This vision is mainly enabled by the advances in precise 3D maps, multi-modal sensing, ray-tracing computations, and machine/deep learning. This article details this vision, explains the different approaches for constructing and utilizing these real-time digital twins, discusses the applications and open problems, and presents a research platform that can be used to investigate various digital twin research directions. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: The 6G digital twin research platform will be available soon on https://deepverse6g.net/

Digital Twin Based Beam Prediction: Can we Train in the Digital World and Deploy in Reality?

Authors: Shuaifeng Jiang, Ahmed Alkhateeb

Abstract: Realizing the potential gains of large-scale MIMO systems requires the accurate estimation of their channels or the fine adjustment of their narrow beams. This, however, is typically associated with high channel acquisition/beam sweeping overhead that scales with the number of antennas. Machine and deep learning represent promising approaches to overcome these challenges thanks to their powerful a… ▽ More Realizing the potential gains of large-scale MIMO systems requires the accurate estimation of their channels or the fine adjustment of their narrow beams. This, however, is typically associated with high channel acquisition/beam sweeping overhead that scales with the number of antennas. Machine and deep learning represent promising approaches to overcome these challenges thanks to their powerful ability to learn from prior observations and side information. Training machine and deep learning models, however, requires large-scale datasets that are expensive to collect in deployed systems. To address this challenge, we propose a novel direction that utilizes digital replicas of the physical world to reduce or even eliminate the MIMO channel acquisition overhead. In the proposed digital twin aided communication, 3D models that approximate the real-world communication environment are constructed and accurate ray-tracing is utilized to simulate the site-specific channels. These channels can then be used to aid various communication tasks. Further, we propose to use machine learning to approximate the digital replicas and reduce the ray tracing computational cost. To evaluate the proposed digital twin based approach, we conduct a case study focusing on the position-aided beam prediction task. The results show that a learning model trained solely with the data generated by the digital replica can achieve relatively good performance on the real-world data. Moreover, a small number of real-world data points can quickly achieve near-optimal performance, overcoming the modeling mismatches between the physical and digital worlds and significantly reducing the data acquisition overhead. △ Less

Submitted 18 January, 2023; originally announced January 2023.

Comments: The dataset is available on the DeepSense 6G website

Sensing Aided Reconfigurable Intelligent Surfaces for 3GPP 5G Transparent Operation

Authors: Shuaifeng Jiang, Ahmed Hindy, Ahmed Alkhateeb

Abstract: Can reconfigurable intelligent surfaces (RISs) operate in a standalone mode that is completely transparent to the 3GPP 5G initial access process? Realizing that may greatly simplify the deployment and operation of these surfaces and reduce the infrastructure control overhead. This paper investigates the feasibility of building standalone/transparent RIS systems and shows that one key challenge lie… ▽ More Can reconfigurable intelligent surfaces (RISs) operate in a standalone mode that is completely transparent to the 3GPP 5G initial access process? Realizing that may greatly simplify the deployment and operation of these surfaces and reduce the infrastructure control overhead. This paper investigates the feasibility of building standalone/transparent RIS systems and shows that one key challenge lies in determining the user equipment (UE)-side RIS beam reflection direction. To address this challenge, we propose to equip the RISs with multi-modal sensing capabilities (e.g., using wireless and visual sensors) that enable them to develop some perception of the surrounding environment and the mobile users. Based on that, we develop a machine learning framework that leverages the wireless and visual sensors at the RIS to select the optimal beams between the base station (BS) and users and enable 5G standalone/transparent RIS operation. Using a high-fidelity synthetic dataset with co-existing wireless and visual data, we extensively evaluate the performance of the proposed framework. Experimental results demonstrate that the proposed approach can accurately predict the BS and UE-side candidate beams, and that the standalone RIS beam selection solution is capable of realizing near-optimal achievable rates with significantly reduced beam training overhead. △ Less

Submitted 24 November, 2022; originally announced November 2022.

Comments: The RIS dataset and script files will be available soon. arXiv admin note: text overlap with arXiv:2211.07563

Device-Agnostic Millimeter Wave Beam Selection using Machine Learning

Authors: Sajad Rezaie, João Morais, Ahmed Alkhateeb, Carles Navarro Manchón

Abstract: Most research in the area of machine learning-based user beam selection considers a structure where the model proposes appropriate user beams. However, this design requires a specific model for each user-device beam codebook, where a model learned for a device with a particular codebook can not be reused for another device with a different codebook. Moreover, this design requires training and test… ▽ More Most research in the area of machine learning-based user beam selection considers a structure where the model proposes appropriate user beams. However, this design requires a specific model for each user-device beam codebook, where a model learned for a device with a particular codebook can not be reused for another device with a different codebook. Moreover, this design requires training and test samples for each antenna placement configuration/codebook. This paper proposes a device-agnostic beam selection framework that leverages context information to propose appropriate user beams using a generic model and a post processing unit. The generic neural network predicts the potential angles of arrival, and the post processing unit maps these directions to beams based on the specific device's codebook. The proposed beam selection framework works well for user devices with antenna configuration/codebook unseen in the training dataset. Also, the proposed generic network has the option to be trained with a dataset mixed of samples with different antenna configurations/codebooks, which significantly eases the burden of effective model training. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Comments: 30 pages, 19 figures. This article was submitted to IEEE Trans. Wirel. Commun. on Nov 14 2022

DeepSense 6G: A Large-Scale Real-World Multi-Modal Sensing and Communication Dataset

Authors: Ahmed Alkhateeb, Gouranga Charan, Tawfik Osman, Andrew Hredzak, João Morais, Umut Demirhan, Nikhil Srinivas

Abstract: This article presents the DeepSense 6G dataset, which is a large-scale dataset based on real-world measurements of co-existing multi-modal sensing and communication data. The DeepSense 6G dataset is built to advance deep learning research in a wide range of applications in the intersection of multi-modal sensing, communication, and positioning. This article provides a detailed overview of the Deep… ▽ More This article presents the DeepSense 6G dataset, which is a large-scale dataset based on real-world measurements of co-existing multi-modal sensing and communication data. The DeepSense 6G dataset is built to advance deep learning research in a wide range of applications in the intersection of multi-modal sensing, communication, and positioning. This article provides a detailed overview of the DeepSense dataset structure, adopted testbeds, data collection and processing methodology, deployment scenarios, and example applications, with the objective of facilitating the adoption and reproducibility of multi-modal sensing and communication datasets. △ Less

Submitted 20 March, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Comments: The dataset is available on the DeepSense 6G website http://deepsense6g.net/

Proactively Predicting Dynamic 6G Link Blockages Using LiDAR and In-Band Signatures

Authors: Shunyao Wu, Chaitali Chakrabarti, Ahmed Alkhateeb

Abstract: Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. To address this challenge, this paper leverages mmWave and LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they occur. This allows the network to make proactiv… ▽ More Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. To address this challenge, this paper leverages mmWave and LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they occur. This allows the network to make proactive decisions for hand-off/beam switching, enhancing the network reliability and latency. More specifically, this paper addresses the following key questions: (i) Can we predict a line-of-sight link blockage, before it happens, using in-band mmWave/THz signal and LiDAR sensing data? (ii) Can we also predict when this blockage will occur? (iii) Can we predict the blockage duration? And (iv) can we predict the direction of the moving blockage? For that, we develop machine learning solutions that learn special patterns of the received signal and sensory data, which we call \textit{pre-blockage signatures}, to infer future blockages. To evaluate the proposed approaches, we build a large-scale real-world dataset that comprises co-existing LiDAR and mmWave communication measurements in outdoor vehicular scenarios. Then, we develop an efficient LiDAR data denoising algorithm that applies some pre-processing to the LiDAR data. Based on the real-world dataset, the developed approaches are shown to achieve above 95\% accuracy in predicting blockages occurring within 100 ms and more than 80\% prediction accuracy for blockages occurring within one second. Given this future blockage prediction capability, the paper also shows that the developed solutions can achieve an order of magnitude saving in network latency, which further highlights the potential of the developed blockage prediction solutions for wireless networks. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Comments: Submitted to IEEE. The dataset is available on the DeepSense 6G website: http://deepsense6g.net/. arXiv admin note: text overlap with arXiv:2111.09581, arXiv:2111.08242

Reconfigurable Intelligent Surface Aided Wireless Sensing for Scene Depth Estimation

Authors: Abdelrahman Taha, Hao Luo, Ahmed Alkhateeb

Abstract: Current scene depth estimation approaches mainly rely on optical sensing, which carries privacy concerns and suffers from estimation ambiguity for distant, shiny, and transparent surfaces/objects. Reconfigurable intelligent surfaces (RISs) provide a path for employing a massive number of antennas using low-cost and energy-efficient architectures. This has the potential for realizing RIS-aided wire… ▽ More Current scene depth estimation approaches mainly rely on optical sensing, which carries privacy concerns and suffers from estimation ambiguity for distant, shiny, and transparent surfaces/objects. Reconfigurable intelligent surfaces (RISs) provide a path for employing a massive number of antennas using low-cost and energy-efficient architectures. This has the potential for realizing RIS-aided wireless sensing with high spatial resolution. In this paper, we propose to employ RIS-aided wireless sensing systems for scene depth estimation. We develop a comprehensive framework for building accurate depth maps using RIS-aided mmWave sensing systems. In this framework, we propose a new RIS interaction codebook capable of creating a sensing grid of reflected beams that meets the desirable characteristics of efficient scene depth map construction. Using the designed codebook, the received signals are processed to build high-resolution depth maps. Simulation results compare the proposed solution against RGB-based approaches and highlight the promise of adopting RIS-aided mmWave sensing in scene depth perception. △ Less

Submitted 15 November, 2022; originally announced November 2022.

Comments: Submitted to IEEE

Millimeter Wave Drones with Cameras: Computer Vision Aided Wireless Beam Prediction

Authors: Gouranga Charan, Andrew Hredzak, Ahmed Alkhateeb

Abstract: Millimeter wave (mmWave) and terahertz (THz) drones have the potential to enable several futuristic applications such as coverage extension, enhanced security monitoring, and disaster management. However, these drones need to deploy large antenna arrays and use narrow directive beams to maintain a sufficient link budget. The large beam training overhead associated with these arrays makes adjusting… ▽ More Millimeter wave (mmWave) and terahertz (THz) drones have the potential to enable several futuristic applications such as coverage extension, enhanced security monitoring, and disaster management. However, these drones need to deploy large antenna arrays and use narrow directive beams to maintain a sufficient link budget. The large beam training overhead associated with these arrays makes adjusting these narrow beams challenging for highly-mobile drones. To address these challenges, this paper proposes a vision-aided machine learning-based approach that leverages visual data collected from cameras installed on the drones to enable fast and accurate beam prediction. Further, to facilitate the evaluation of the proposed solution, we build a synthetic drone communication dataset consisting of co-existing wireless and visual data. The proposed vision-aided solution achieves a top-$1$ beam prediction accuracy of $\approx 91\%$ and close to $100\%$ top-$3$ accuracy. These results highlight the efficacy of the proposed solution towards enabling highly mobile mmWave/THz drone communication. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: The mmWave drone dataset and code files will be available soon! arXiv admin note: text overlap with arXiv:2205.12187

Camera Aided Reconfigurable Intelligent Surfaces: Computer Vision Based Fast Beam Selection

Authors: Shuaifeng Jiang, Ahmed Hindy, Ahmed Alkhateeb

Abstract: Reconfigurable intelligent surfaces (RISs) have attracted increasing interest due to their ability to improve the coverage, reliability, and energy efficiency of millimeter wave (mmWave) communication systems. However, designing the RIS beamforming typically requires large channel estimation or beam training overhead, which degrades the efficiency of these systems. In this paper, we propose to equ… ▽ More Reconfigurable intelligent surfaces (RISs) have attracted increasing interest due to their ability to improve the coverage, reliability, and energy efficiency of millimeter wave (mmWave) communication systems. However, designing the RIS beamforming typically requires large channel estimation or beam training overhead, which degrades the efficiency of these systems. In this paper, we propose to equip the RIS surfaces with visual sensors (cameras) that obtain sensing information about the surroundings and user/basestation locations, guide the RIS beam selection, and reduce the beam training overhead. We develop a machine learning (ML) framework that leverages this visual sensing information to efficiently select the optimal RIS reflection beams that reflect the signals between the basestation and mobile users. To evaluate the developed approach, we build a high-fidelity synthetic dataset that comprises co-existing wireless and visual data. Based on this dataset, the results show that the proposed vision-aided machine learning solution can accurately predict the RIS beams and achieve near-optimal achievable rate while significantly reducing the beam training overhead. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 6 pages, 6 figures. The RIS dataset and code files will be available soon!

User Identification: A Key Enabler for Multi-User Vision-Aided Communications

Authors: Gouranga Charan, Ahmed Alkhateeb

Abstract: Vision-aided wireless communication is attracting increasing interest and finding new use cases in various wireless communication applications. These vision-aided communication frameworks leverage visual data captured, for example, by cameras installed at the infrastructure or mobile devices to construct some perception about the communication environment through the use of deep learning and advan… ▽ More Vision-aided wireless communication is attracting increasing interest and finding new use cases in various wireless communication applications. These vision-aided communication frameworks leverage visual data captured, for example, by cameras installed at the infrastructure or mobile devices to construct some perception about the communication environment through the use of deep learning and advances in computer vision and visual scene understanding. Prior work has investigated various problems such as vision-aided beam, blockage, and hand-off prediction in millimeter wave (mmWave) systems and vision-aided covariance prediction in massive MIMO systems. This prior work, however, has focused on scenarios with a single object (user) in front of the camera. In this paper, we define the \textit{user identification} task as a key enabler for realistic vision-aided communication systems that can operate in crowded scenarios and support multi-user applications. The objective of the user identification task is to identify the target communication user from the other candidate objects (distractors) in the visual scene. We develop machine learning models that process either one frame or a sequence of frames of visual and wireless data to efficiently identify the target user in the visual/communication environment. Using the large-scale multi-modal sense and communication dataset, DeepSense 6G, which is based on real-world measurements, we show that the developed approaches can successfully identify the target users with more than 97$\%$ accuracy in realistic settings. This paves the way for scaling the vision-aided wireless communication applications to real-world scenarios and practical deployments. △ Less

Submitted 6 August, 2023; v1 submitted 27 October, 2022; originally announced October 2022.

Comments: Datasets and code files are available on the DeepSense website: https://deepsense6g.net/

Deep Learning of Near Field Beam Focusing in Terahertz Wideband Massive MIMO Systems

Authors: Yu Zhang, Ahmed Alkhateeb

Abstract: Employing large antenna arrays and utilizing large bandwidth have the potential of bringing very high data rates to future wireless communication systems. However, this brings the system into the near-field regime and also makes the conventional transceiver architectures suffer from the wideband effects. To address these problems, in this paper, we propose a low-complexity frequency-aware beamform… ▽ More Employing large antenna arrays and utilizing large bandwidth have the potential of bringing very high data rates to future wireless communication systems. However, this brings the system into the near-field regime and also makes the conventional transceiver architectures suffer from the wideband effects. To address these problems, in this paper, we propose a low-complexity frequency-aware beamforming solution that is designed for hybrid time-delay and phase-shifter based RF architectures. To reduce the complexity, the joint design problem of the time delays and phase shifts is decomposed into two subproblems, where a signal model inspired online learning framework is proposed to learn the shifts of the quantized analog phase shifters, and a low-complexity geometry-assisted method is leveraged to configure the delay settings of the time-delay units. Simulation results highlight the efficacy of the proposed solution in achieving robust performance across a wide frequency range for large antenna array systems. △ Less

Submitted 31 December, 2022; v1 submitted 6 October, 2022; originally announced October 2022.

Comments: Accepted in IEEE Wireless Communications Letters. The code files will be available on https://github.com/YuZhang-GitHub/NFWB_BF