-
Swing-Up of a Weakly Actuated Double Pendulum via Nonlinear Normal Modes
Authors:
Arne Sachtler,
Davide Calzolari,
Maximilian Raff,
Annika Schmidt,
Yannik P. Wotte,
Cosimo Della Santina,
C. David Remy,
Alin Albu-Schäffer
Abstract:
We identify the nonlinear normal modes spawning from the stable equilibrium of a double pendulum under gravity, and we establish their connection to homoclinic orbits through the unstable upright position as energy increases. This result is exploited to devise an efficient swing-up strategy for a double pendulum with weak, saturating actuators. Our approach involves stabilizing the system onto per…
▽ More
We identify the nonlinear normal modes spawning from the stable equilibrium of a double pendulum under gravity, and we establish their connection to homoclinic orbits through the unstable upright position as energy increases. This result is exploited to devise an efficient swing-up strategy for a double pendulum with weak, saturating actuators. Our approach involves stabilizing the system onto periodic orbits associated with the nonlinear modes while gradually injecting energy. Since these modes are autonomous system evolutions, the required control effort for stabilization is minimal. Even with actuator limitations of less than 1% of the maximum gravitational torque, the proposed method accomplishes the swing-up of the double pendulum by allowing sufficient time.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Towards Safe and Collaborative Robotic Ultrasound Tissue Scanning in Neurosurgery
Authors:
Michael Dyck,
Alistair Weld,
Julian Klodmann,
Alexander Kirst,
Luke Dixon,
Giulio Anichini,
Sophie Camp,
Alin Albu-Schäffer,
Stamatia Giannarou
Abstract:
Intraoperative ultrasound imaging is used to facilitate safe brain tumour resection. However, due to challenges with image interpretation and the physical scanning, this tool has yet to achieve widespread adoption in neurosurgery. In this paper, we introduce the components and workflow of a novel, versatile robotic platform for intraoperative ultrasound tissue scanning in neurosurgery. An RGB-D ca…
▽ More
Intraoperative ultrasound imaging is used to facilitate safe brain tumour resection. However, due to challenges with image interpretation and the physical scanning, this tool has yet to achieve widespread adoption in neurosurgery. In this paper, we introduce the components and workflow of a novel, versatile robotic platform for intraoperative ultrasound tissue scanning in neurosurgery. An RGB-D camera attached to the robotic arm allows for automatic object localisation with ArUco markers, and 3D surface reconstruction as a triangular mesh using the ImFusion Suite software solution. Impedance controlled guidance of the US probe along arbitrary surfaces, represented as a mesh, enables collaborative US scanning, i.e., autonomous, teleoperated and hands-on guided data acquisition. A preliminary experiment evaluates the suitability of the conceptual workflow and system components for probe landing on a custom-made soft-tissue phantom. Further assessment in future experiments will be necessary to prove the effectiveness of the presented platform.
△ Less
Submitted 4 January, 2024; v1 submitted 13 December, 2023;
originally announced December 2023.
-
EigenMPC: An Eigenmanifold-Inspired Model-Predictive Control Framework for Exciting Efficient Oscillations in Mechanical Systems
Authors:
Andre Coelho,
Alin Albu-Schaeffer,
Arne Sachtler,
Hrishik Mishra,
Davide Bicego,
Christian Ott,
Antonio Franchi
Abstract:
This paper proposes a Nonlinear Model-Predictive Control (NMPC) method capable of finding and converging to energy-efficient regular oscillations, which require no control action to be sustained. The approach builds up on the recently developed Eigenmanifold theory, which defines the sets of line-shaped oscillations of a robot as an invariant two-dimensional submanifold of its state space. By defi…
▽ More
This paper proposes a Nonlinear Model-Predictive Control (NMPC) method capable of finding and converging to energy-efficient regular oscillations, which require no control action to be sustained. The approach builds up on the recently developed Eigenmanifold theory, which defines the sets of line-shaped oscillations of a robot as an invariant two-dimensional submanifold of its state space. By defining the control problem as a nonlinear program (NLP), the controller is able to deal with constraints in the state and control variables and be energy-efficient not only in its final trajectory but also during the convergence phase. An initial implementation of this approach is proposed, analyzed, and tested in simulation.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Model Predictive Control for Flexible Joint Robots
Authors:
Maged Iskandar,
Christiaan van Ommeren,
Xuwei Wu,
Alin Albu-Schaffer,
Alexander Dietrich
Abstract:
Modern Lightweight robots are constructed to be collaborative, which often results in a low structural stiffness compared to conventional rigid robots. Therefore, the controller must be able to handle the dynamic oscillatory effect mainly due to the intrinsic joint elasticity. Singular perturbation theory makes it possible to decompose the flexible joint dynamics into fast and slow subsystems. Thi…
▽ More
Modern Lightweight robots are constructed to be collaborative, which often results in a low structural stiffness compared to conventional rigid robots. Therefore, the controller must be able to handle the dynamic oscillatory effect mainly due to the intrinsic joint elasticity. Singular perturbation theory makes it possible to decompose the flexible joint dynamics into fast and slow subsystems. This model separation provides additional features to incorporate future knowledge of the jointlevel dynamical behavior within the controller design using the Model Predictive Control (MPC) technique. In this study, different architectures are considered that combine the method of Singular Perturbation and MPC. For Singular Perturbation, the parameters that influence the validity of using this technique to control a flexible-joint robot are investigated. Furthermore, limits on the input constraints for the future trajectory are considered with MPC. The position control performance and robustness against external forces of each architecture are validated experimentally for a flexible joint robot.
△ Less
Submitted 14 October, 2022;
originally announced October 2022.
-
Redundancy Resolution at Position Level
Authors:
Alin Albu-Schäffer,
Arne Sachtler
Abstract:
Increasing the degrees of freedom of robotic systems makes them more versatile and flexible. This usually renders the system kinematically redundant: the main manipulation or interaction task does not fully determine its joint maneuvers. Additional constraints or objectives are required to solve the under-determined control and planning problems. The state-of-the-art approaches arrange tasks in a…
▽ More
Increasing the degrees of freedom of robotic systems makes them more versatile and flexible. This usually renders the system kinematically redundant: the main manipulation or interaction task does not fully determine its joint maneuvers. Additional constraints or objectives are required to solve the under-determined control and planning problems. The state-of-the-art approaches arrange tasks in a hierarchy and decouple lower from higher priority tasks on velocity or torque level using projectors. We develop an approach to redundancy resolution and decoupling on position level by determining subspaces of the configurations space independent of the primary task. We call them \emph{orthogonal foliations} because they are, in a certain sense, orthogonal to the task self-motion manifolds. The approach provides a better insight into the topological properties of robot kinematics and control problems, allowing a global view. A condition for the existence of orthogonal foliations is derived. If the condition is not satisfied, we will still find approximate solutions by numerical optimization. Coordinates can be defined on these orthogonal foliations and can be used as additional task variables for control. We show in simulations that we can control the system without the need for projectors using these coordinates, and we validate the approach experimentally on a 7-DoF robot.
△ Less
Submitted 31 August, 2023; v1 submitted 20 February, 2022;
originally announced February 2022.
-
One-Dimensional Solution Families of Nonlinear Systems Characterized by Scalar Functions on Riemannian Manifolds
Authors:
Alin Albu-Schaeffer,
Dominic Lakatos,
Stefano Stramigioli
Abstract:
For the study of highly nonlinear, conservative dynamic systems, finding special periodic solutions which can be seen as generalization of the well-known normal modes of linear systems is very attractive. However, the study of low-dimensional invariant manifolds in the form of nonlinear normal modes is rather a niche topic, treated mainly in the context of structural mechanics for systems with Euc…
▽ More
For the study of highly nonlinear, conservative dynamic systems, finding special periodic solutions which can be seen as generalization of the well-known normal modes of linear systems is very attractive. However, the study of low-dimensional invariant manifolds in the form of nonlinear normal modes is rather a niche topic, treated mainly in the context of structural mechanics for systems with Euclidean metrics, i.e., for point masses connected by nonlinear springs. Newest results emphasize, however, that a very rich structure of periodic and low-dimensional solutions exist also within nonlinear systems such as elastic multi-body systems encountered in the biomechanics of humans and animals or of humanoid and quadruped robots, which are characterized by a non-constant metric tensor. This paper discusses different generalizations of linear oscillation modes to nonlinear systems and proposes a definition of strict nonlinear normal modes, which matches most of the relevant properties of the linear modes. The main contributions are a theorem providing necessary and sufficient conditions for the existence of strict oscillation modes on systems endowed with a Riemannian metric and a potential field as well as a constructive example of designing such modes in the case of an elastic double pendulum.
△ Less
Submitted 5 November, 2019;
originally announced November 2019.
-
Model-free Friction Observers for Flexible Joint Robots with Torque Measurements
Authors:
Min Jun Kim,
Fabian Beck,
Christian Ott,
Alin Albu-Schaeffer
Abstract:
This paper tackles a friction compensation problem without using a friction model. The unique feature of the proposed friction observer is that the nominal motor-side signal is fed back into the controller instead of the measured signal. By doing so, asymptotic stability and passivity of the controller are maintained. Another advantage of the proposed observer is that it provides a clear understan…
▽ More
This paper tackles a friction compensation problem without using a friction model. The unique feature of the proposed friction observer is that the nominal motor-side signal is fed back into the controller instead of the measured signal. By doing so, asymptotic stability and passivity of the controller are maintained. Another advantage of the proposed observer is that it provides a clear understanding for the stiction compensation which is hard to be captured in model-free approaches. This allows to design observers that do not overcompensate for the stiction. The proposed scheme is validated through simulations and experiments.
△ Less
Submitted 1 July, 2019;
originally announced July 2019.
-
Using Nonlinear Normal Modes for Execution of Efficient Cyclic Motions in Articulated Soft Robots
Authors:
Cosimo Della Santina,
Dominic Lakatos,
Antonio Bicchi,
Alin Albu-Schäffer
Abstract:
Inspired by the vertebrate branch of the animal kingdom, articulated soft robots are robotic systems embedding elastic elements into a classic rigid (skeleton-like) structure. Leveraging on their bodies elasticity, soft robots promise to push their limits far beyond the barriers that affect their rigid counterparts. However, existing control strategies aiming at achieving this goal are either tail…
▽ More
Inspired by the vertebrate branch of the animal kingdom, articulated soft robots are robotic systems embedding elastic elements into a classic rigid (skeleton-like) structure. Leveraging on their bodies elasticity, soft robots promise to push their limits far beyond the barriers that affect their rigid counterparts. However, existing control strategies aiming at achieving this goal are either tailored on specific examples, or rely on model cancellations -- thus defeating the purpose of introducing elasticity in the first place.
In a series of recent works, we proposed to implement efficient oscillatory motions in robots subject to a potential field, aimed at solving these issues. A main component of this theory are Eigenmanifolds, that we defined as nonlinear continuations of the classic linear eigenspaces. When the soft robot is initialized on one of these manifolds, it evolves autonomously while presenting regular -- and thus practically useful -- evolutions, called normal modes. In addition to that, we proposed a control strategy making modal manifolds attractors for the system, and acting on the total energy of the soft robot to move from a modal evolution to the other. In this way, a large class of autonomous behaviors can be excited, which are direct expression of the embodied intelligence of the soft robot.
Despite the fact that the idea behind our work comes from physical intuition and preliminary experimental validations, the formulation that we have provided so far is however rather theoretical, and very much in need of an experimental validation. The aim of this paper is to provide such an experimental validation using as testbed the articulated soft leg. We will introduce a simplified control strategy, and we will test its effectiveness on this system, to implement swing-like oscillations. We plan to extend this validation with a soft quadruped.
△ Less
Submitted 5 September, 2023; v1 submitted 21 June, 2018;
originally announced June 2018.
