-
Instance-Optimal Imprecise Convex Hull
Authors:
Sarita de Berg,
Ivor van der Hoog,
Eva Rotenberg,
Daniel Rutschmann,
Sampson Wong
Abstract:
Imprecise measurements of a point set P = (p1, ..., pn) can be modelled by a family of regions F = (R1, ..., Rn), where each imprecise region Ri contains a unique point pi. A retrieval models an accurate measurement by replacing an imprecise region Ri with its corresponding point pi. We construct the convex hull of an imprecise point set in the plane, where regions in F may be retrieved at unit co…
▽ More
Imprecise measurements of a point set P = (p1, ..., pn) can be modelled by a family of regions F = (R1, ..., Rn), where each imprecise region Ri contains a unique point pi. A retrieval models an accurate measurement by replacing an imprecise region Ri with its corresponding point pi. We construct the convex hull of an imprecise point set in the plane, where regions in F may be retrieved at unit cost. The goal is to determine the cyclic ordering of the convex hull vertices of P as efficiently as possible. Here, efficiency is interpreted in two ways: (i) minimising the number of retrievals, and (ii) computing each retrieval location quickly.
Prior works focused on only one of these two aspects: either minimising retrievals or optimising algorithmic runtime. Our contribution is the first to simultaneously achieve both. Let r(F, P) denote the minimal number of retrievals required by any algorithm to determine the convex hull of P for a given instance (F, P). For a family F of n constant-complexity polygons, our main result is a reconstruction algorithm that performs O(r(F, P)) retrievals in O(r(F, P) log^3 n) time.
Compared to previous approaches that achieve optimal retrieval counts, we improve the runtime per retrieval by a exponential factor, from polynomial to polylogarithmic. Compared to near-linear time algorithms, we significantly reduce the number of retrievals used, and broaden the input families to include overlapping regions. We further extend our results to simple k-gons and to pairwise disjoint disks with radii in [1,k], where our runtime scales linearly with k.
△ Less
Submitted 26 June, 2025; v1 submitted 3 April, 2025;
originally announced April 2025.
-
Nearest Neighbor Searching in a Dynamic Simple Polygon
Authors:
Sarita de Berg,
Frank Staals
Abstract:
In the nearest neighbor problem, we are given a set $S$ of point sites that we want to store such that we can find the nearest neighbor of a (new) query point efficiently. In the dynamic version of the problem, the goal is to design a data structure that supports both efficient queries and updates, i.e. insertions and deletions in $S$. This problem has been widely studied in various settings, rang…
▽ More
In the nearest neighbor problem, we are given a set $S$ of point sites that we want to store such that we can find the nearest neighbor of a (new) query point efficiently. In the dynamic version of the problem, the goal is to design a data structure that supports both efficient queries and updates, i.e. insertions and deletions in $S$. This problem has been widely studied in various settings, ranging from points in the plane to more general distance measures and even points within simple polygons. When the sites do not live in the plane but in some domain, another dynamic problem arises: what happens if not the sites, but the domain itself is subject to updates?
Updating sites often results in local changes to the solution or data structure, while updating the domain may incur many global changes. For example, in the closest pair problem, inserting a point only requires us to check if this point is in the new closest pair, while updating the domain might change the distances between most pairs of points in our set. Presumably, this is the reason that this form of dynamization has received much less attention. Only some basic problems, such as shortest paths and ray shooting, have been studied in this setting.
Here, we tackle the nearest neighbor problem in a dynamic simple polygon. We allow insertions into both the set of sites and the polygon. An insertion in the polygon is the addition of a line segment starting at the boundary of the polygon. We present a near-linear size --in both the number of sites and the complexity of the polygon-- data structure with sublinear update and query time. This is the first nearest neighbor data structure that allows for updates to the domain.
△ Less
Submitted 5 March, 2025;
originally announced March 2025.
-
The Complexity of Geodesic Spanners using Steiner Points
Authors:
Sarita de Berg,
Tim Ophelders,
Irene Parada,
Frank Staals,
Jules Wulms
Abstract:
A geometric $t$-spanner $\mathcal{G}$ on a set $S$ of $n$ point sites in a metric space $P$ is a subgraph of the complete graph on $S$ such that for every pair of sites $p,q$ the distance in $\mathcal{G}$ is a most $t$ times the distance $d(p,q)$ in $P$. We call a connection between two sites a \emph{link}. In some settings, such as when $P$ is a simple polygon with $m$ vertices and a link is a sh…
▽ More
A geometric $t$-spanner $\mathcal{G}$ on a set $S$ of $n$ point sites in a metric space $P$ is a subgraph of the complete graph on $S$ such that for every pair of sites $p,q$ the distance in $\mathcal{G}$ is a most $t$ times the distance $d(p,q)$ in $P$. We call a connection between two sites a \emph{link}. In some settings, such as when $P$ is a simple polygon with $m$ vertices and a link is a shortest path in $P$, links can consist of $Θ(m)$ segments and thus have non-constant complexity. The spanner complexity is a measure of how compact a spanner is, which is equal to the sum of the complexities of all links in the spanner. In this paper, we study what happens if we are allowed to introduce $k$ Steiner points to reduce the spanner complexity. We study such Steiner spanners in simple polygons, polygonal domains, and edge-weighted trees. We show that Steiner points have only limited utility. For a spanner that uses $k$ Steiner points, we provide an $Ω(mn^{1/(t+1)}/k^{1/(t+1)})$ lower bound on the worst-case complexity of any $(t-\varepsilon)$-spanner, for any constant $\varepsilon \in (0,1)$ and integer constant $t \geq 2$. Additionally, we show NP-hardness for the problem of deciding whether a set of sites in a polygonal domain admits a $3$-spanner with a given maximum complexity using $k$ Steiner points. On the positive side, for trees we show how to build a $2t$-spanner that uses $k$ Steiner points of complexity $O(mn^{1/t}/k^{1/t} + n \log (n/k))$, for any integer $t \geq 1$. We generalize this to forests, and use it to obtain a $2\sqrt{2}t$-spanner in a simple polygon with complexity $O(mn^{1/t}(\log k)^{1+1/t}/k^{1/t} + n\log^2 n)$. When a link can be any path between two sites, we show how to improve the spanning ratio to $(2k+\varepsilon)$, for any constant $\varepsilon \in (0,2k)$, and how to build a $6t$-spanner in a polygonal domain with the same complexity.
△ Less
Submitted 19 September, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Exact solutions to the Weighted Region Problem
Authors:
Sarita de Berg,
Guillermo Esteban,
Rodrigo I. Silveira,
Frank Staals
Abstract:
In this paper, we consider the Weighted Region Problem. In the Weighted Region Problem, the length of a path is defined as the sum of the weights of the subpaths within each region, where the weight of a subpath is its Euclidean length multiplied by a weight $ α\geq 0 $ depending on the region. We study a restricted version of the problem of determining shortest paths through a single weighted rec…
▽ More
In this paper, we consider the Weighted Region Problem. In the Weighted Region Problem, the length of a path is defined as the sum of the weights of the subpaths within each region, where the weight of a subpath is its Euclidean length multiplied by a weight $ α\geq 0 $ depending on the region. We study a restricted version of the problem of determining shortest paths through a single weighted rectangular region. We prove that even this very restricted version of the problem is unsolvable within the Algebraic Computation Model over the Rational Numbers (ACMQ). On the positive side, we provide the equations for the shortest paths that are computable within the ACMQ. Additionally, we provide equations for the bisectors between regions of the Shortest Path Map for a source point on the boundary of (or inside) the rectangular region.
△ Less
Submitted 9 January, 2025; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Competitive Searching over Terrains
Authors:
Sarita de Berg,
Nathan van Beusekom,
Max van Mulken,
Kevin Verbeek,
Jules Wulms
Abstract:
We study a variant of the searching problem where the environment consists of a known terrain and the goal is to obtain visibility of an unknown target point on the surface of the terrain. The searcher starts on the surface of the terrain and is allowed to fly above the terrain. The goal is to devise a searching strategy that minimizes the competitive ratio, that is, the worst-case ratio between t…
▽ More
We study a variant of the searching problem where the environment consists of a known terrain and the goal is to obtain visibility of an unknown target point on the surface of the terrain. The searcher starts on the surface of the terrain and is allowed to fly above the terrain. The goal is to devise a searching strategy that minimizes the competitive ratio, that is, the worst-case ratio between the distance traveled by the searching strategy and the minimum travel distance needed to detect the target. For $1.5$D terrains we show that any searching strategy has a competitive ratio of at least $\sqrt{82}$ and we present a nearly-optimal searching strategy that achieves a competitive ratio of $3\sqrt{19/2} \approx \sqrt{82} + 0.19$. This strategy extends directly to the case where the searcher has no knowledge of the terrain beforehand. For $2.5$D terrains we show that the optimal competitive ratio depends on the maximum slope $λ$ of the terrain, and is hence unbounded in general. Specifically, we provide a lower bound on the competitive ratio of $Ω(\sqrtλ)$. Finally, we complement the lower bound with a searching strategy based on the maximum slope of the known terrain, which achieves a competitive ratio of $O(\sqrtλ)$.
△ Less
Submitted 2 January, 2024;
originally announced January 2024.
-
Clustering with Few Disks to Minimize the Sum of Radii
Authors:
Mikkel Abrahamsen,
Sarita de Berg,
Lucas Meijer,
André Nusser,
Leonidas Theocharous
Abstract:
Given a set of $n$ points in the Euclidean plane, the $k$-MinSumRadius problem asks to cover this point set using $k$ disks with the objective of minimizing the sum of the radii of the disks. After a long line of research on related problems, it was finally discovered that this problem admits a polynomial time algorithm [GKKPV~'12]; however, the running time of this algorithm is $O(n^{881})$, and…
▽ More
Given a set of $n$ points in the Euclidean plane, the $k$-MinSumRadius problem asks to cover this point set using $k$ disks with the objective of minimizing the sum of the radii of the disks. After a long line of research on related problems, it was finally discovered that this problem admits a polynomial time algorithm [GKKPV~'12]; however, the running time of this algorithm is $O(n^{881})$, and its relevance is thereby mostly of theoretical nature. A practically and structurally interesting special case of the $k$-MinSumRadius problem is that of small $k$. For the $2$-MinSumRadius problem, a near-quadratic time algorithm with expected running time $O(n^2 \log^2 n \log^2 \log n)$ was given over 30 years ago [Eppstein~'92].
We present the first improvement of this result, namely, a near-linear time algorithm to compute the $2$-MinSumRadius that runs in expected $O(n \log^2 n \log^2 \log n)$ time. We generalize this result to any constant dimension $d$, for which we give an $O(n^{2-1/(\lceil d/2\rceil + 1) + \varepsilon})$ time algorithm. Additionally, we give a near-quadratic time algorithm for $3$-MinSumRadius in the plane that runs in expected $O(n^2 \log^2 n \log^2 \log n)$ time. All of these algorithms rely on insights that uncover a surprisingly simple structure of optimal solutions: we can specify a linear number of lines out of which one separates one of the clusters from the remaining clusters in an optimal solution.
△ Less
Submitted 12 September, 2024; v1 submitted 14 December, 2023;
originally announced December 2023.
-
The Complexity of Geodesic Spanners
Authors:
Sarita de Berg,
Marc van Kreveld,
Frank Staals
Abstract:
A geometric $t$-spanner for a set $S$ of $n$ point sites is an edge-weighted graph for which the (weighted) distance between any two sites $p,q \in S$ is at most $t$ times the original distance between $p$ and~$q$. We study geometric $t$-spanners for point sets in a constrained two-dimensional environment $P$. In such cases, the edges of the spanner may have non-constant complexity. Hence, we intr…
▽ More
A geometric $t$-spanner for a set $S$ of $n$ point sites is an edge-weighted graph for which the (weighted) distance between any two sites $p,q \in S$ is at most $t$ times the original distance between $p$ and~$q$. We study geometric $t$-spanners for point sets in a constrained two-dimensional environment $P$. In such cases, the edges of the spanner may have non-constant complexity. Hence, we introduce a novel spanner property: the spanner complexity, that is, the total complexity of all edges in the spanner. Let $S$ be a set of $n$ point sites in a simple polygon $P$ with $m$ vertices. We present an algorithm to construct, for any fixed integer $k \geq 1$, a $2\sqrt{2}k$-spanner with complexity $O(mn^{1/k} + n\log^2 n)$ in $O(n\log^2n + m\log n + K)$ time, where $K$ denotes the output complexity. When we relax the restriction that the edges in the spanner are shortest paths, such that an edge in the spanner can be any path between two sites, we obtain for any constant $\varepsilon \in (0,2k)$ a relaxed geodesic $(2k + \varepsilon)$-spanner of the same complexity, where the constant is dependent on $\varepsilon$. When we consider sites in a polygonal domain $P$ with holes, we can construct a relaxed geodesic $6k$-spanner of complexity $O(mn^{1/k} + n\log^2 n)$ in $O((n+m)\log^2n\log m+ K)$ time. Additionally, for any constant $\varepsilon \in (0,1)$ and integer constant $t \geq 2$, we show a lower bound for the complexity of any $(t-\varepsilon)$-spanner of $Ω(mn^{1/(t-1)} + n)$.
△ Less
Submitted 11 April, 2024; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Towards Space Efficient Two-Point Shortest Path Queries in a Polygonal Domain
Authors:
Sarita de Berg,
Tillmann Miltzow,
Frank Staals
Abstract:
We devise a data structure that can answer shortest path queries for two query points in a polygonal domain $P$ on $n$ vertices. For any $\varepsilon > 0$, the space complexity of the data structure is $O(n^{10+\varepsilon })$ and queries can be answered in $O(\log n)$ time. Alternatively, we can achieve a space complexity of $O(n^{9+\varepsilon })$ by relaxing the query time to $O(\log^2 n)$. Thi…
▽ More
We devise a data structure that can answer shortest path queries for two query points in a polygonal domain $P$ on $n$ vertices. For any $\varepsilon > 0$, the space complexity of the data structure is $O(n^{10+\varepsilon })$ and queries can be answered in $O(\log n)$ time. Alternatively, we can achieve a space complexity of $O(n^{9+\varepsilon })$ by relaxing the query time to $O(\log^2 n)$. This is the first improvement upon a conference paper by Chiang and Mitchell from 1999. They present a data structure with $O(n^{11})$ space complexity and $O(\log n)$ query time. Our main result can be extended to include a space-time trade-off. Specifically, we devise data structures with $O(n^{9+\varepsilon}/\hspace{1pt} \ell^{4 + O(\varepsilon )})$ space complexity and $O(\ell \log^2 n )$ query time, for any integer $1 \leq \ell \leq n$.
Furthermore, we present improved data structures with $O(\log n)$ query time for the special case where we restrict one (or both) of the query points to lie on the boundary of $P$. When one of the query points is restricted to lie on the boundary, and the other query point is unrestricted, the space complexity becomes $O(n^{6+\varepsilon})$. When both query points are on the boundary, the space complexity is decreased further to $O(n^{4+\varepsilon })$, thereby improving an earlier result of Bae and Okamoto.
△ Less
Submitted 21 February, 2024; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Dynamic Data Structures for $k$-Nearest Neighbor Queries
Authors:
Sarita de Berg,
Frank Staals
Abstract:
Our aim is to develop dynamic data structures that support $k$-nearest neighbors ($k$-NN) queries for a set of $n$ point sites in the plane in $O(f(n) + k)$ time, where $f(n)$ is some polylogarithmic function of $n$. The key component is a general query algorithm that allows us to find the $k$-NN spread over $t$ substructures simultaneously, thus reducing an $O(tk)$ term in the query time to…
▽ More
Our aim is to develop dynamic data structures that support $k$-nearest neighbors ($k$-NN) queries for a set of $n$ point sites in the plane in $O(f(n) + k)$ time, where $f(n)$ is some polylogarithmic function of $n$. The key component is a general query algorithm that allows us to find the $k$-NN spread over $t$ substructures simultaneously, thus reducing an $O(tk)$ term in the query time to $O(k)$. Combining this technique with the logarithmic method allows us to turn any static $k$-NN data structure into a data structure supporting both efficient insertions and queries. For the fully dynamic case, this technique allows us to recover the deterministic, worst-case, $O(\log^2n/\log\log n +k)$ query time for the Euclidean distance claimed before, while preserving the polylogarithmic update times. We adapt this data structure to also support fully dynamic \emph{geodesic} $k$-NN queries among a set of sites in a simple polygon. For this purpose, we design a shallow cutting based, deletion-only $k$-NN data structure. More generally, we obtain a dynamic planar $k$-NN data structure for any type of distance functions for which we can build vertical shallow cuttings. We apply all of our methods in the plane for the Euclidean distance, the geodesic distance, and general, constant-complexity, algebraic distance functions.
△ Less
Submitted 1 December, 2022; v1 submitted 24 September, 2021;
originally announced September 2021.
