-
PER Measurement of BLE in RF Interference and Harsh Electromagnetic Environment
Authors:
Mir Lodro,
Gabriele Gradoni,
Ana Vukovic,
David Thomas,
Steve Greedy
Abstract:
Bluetooth Low Energy (BLE) is a short-range data transmission technology that is used for multimedia file sharing, home automation, and internet-of-things application. In this work, we perform packet error rate (PER) measurement and RF testing of BLE receiver in the harsh electromagnetic environment and in presence of RF interference. We check the PER performance in the line-of-sight (LOS) and non…
▽ More
Bluetooth Low Energy (BLE) is a short-range data transmission technology that is used for multimedia file sharing, home automation, and internet-of-things application. In this work, we perform packet error rate (PER) measurement and RF testing of BLE receiver in the harsh electromagnetic environment and in presence of RF interference. We check the PER performance in the line-of-sight (LOS) and non-line-of-sight (NLOS) scenario in absence of any interfering signal and in presence of wideband WLAN interference. The BLE PER measurements are conducted in a large reverberation chamber which is a rich scattering environment. Software-defined-radio has been used to create BLE communication link for PER measurement in LOS and NLOS configuration. The BLE PER is measured both in the presence and in absence of WLAN interference. Our measurement results show a higher PER for uncoded BLE PHY modes in NLOS channel condition and in presence of wideband interference. Whereas coded BLE PHY modes i.e. LE500K and LE125K are robust to interference with lower PER measurements.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Near-field Image Transmission and EVM Measurements in Rich Scattering Environment
Authors:
Mir Lodro,
Gabriele Gradoni,
Christopher Smartt,
Ana Vukovic,
David Thomas,
Steve Greedy
Abstract:
In this work, we present near-field image transmission and error vector magnitude measurement in a rich scattering environment in a metal enclosure. We check the effect of loading metal enclosure on the performance of SDR based near-field communication link. We focus on the key communication receiver parameters to observe the effect of near-field link in presence of rich-scattering and in presence…
▽ More
In this work, we present near-field image transmission and error vector magnitude measurement in a rich scattering environment in a metal enclosure. We check the effect of loading metal enclosure on the performance of SDR based near-field communication link. We focus on the key communication receiver parameters to observe the effect of near-field link in presence of rich-scattering and in presence of loading with RF absorber cones. The near-field performance is measured by transmitting wideband OFDM-modulated packets containing image information. Our finding suggests that the performance of OFDM based wideband near-field communication improves when the metal enclosure is loaded with RF absorbers. Near-field EVM improves when the enclosure is loaded with RF absorber cones. Loading of the metal enclosure has the effect of increased coherence bandwidth. Frequency selectivity was observed in an empty enclosure which suggests coherence bandwidth less than the signal bandwidth.
△ Less
Submitted 31 January, 2021;
originally announced February 2021.
-
Statistical Characterization of Wireless MIMO Channels in Mode-Stirred Enclosures
Authors:
Mir Lodro,
Steve Greedy,
Sirio Belga Fedeli,
Christopher Smartt,
Ana Vukovic,
David Thomas,
Gabriele Gradoni
Abstract:
We present the statistical characterization of a 2x2 Multiple-Input Multiple-Output wireless link operated in a mode-stirred enclosure, with channel state information available only at the receiver (agnostic transmitter). Our wireless channel measurements are conducted in absence of line of sight and varying the inter-element spacing between the two antenna elements in both the transmit and receiv…
▽ More
We present the statistical characterization of a 2x2 Multiple-Input Multiple-Output wireless link operated in a mode-stirred enclosure, with channel state information available only at the receiver (agnostic transmitter). Our wireless channel measurements are conducted in absence of line of sight and varying the inter-element spacing between the two antenna elements in both the transmit and receive array. The mode-stirred cavity is operated: i) at a low number of stirrer positions to create statistical inhomogeneity; ii) at two different loading conditions, empty and with absorbers, in order to mimic a wide range of realistic equipment level enclosures. Our results show that two parallel channels are obtained within the confined space at both the operating conditions. The statistical characterization of the wireless channel is presented in terms of coherence bandwidth, path loss, delay spread and Rician factor, and wideband channel capacity. It is found that the severe multipath fading supported by a highly reflecting environment creates unbalance between the two Multiple-Input Multiple-Output channels, even in presence of substantial losses. Furthermore, the channel capacity has a multi-modal distribution whose average and variance scale monotonically with the number of absorbers. Results are of interest in IoT devices, including wireless chip-to-chip and device-to-device communications, operating in highly reflective environments.
△ Less
Submitted 30 January, 2021;
originally announced February 2021.
-
Extended Capability Models for Carbon Fiber Composite (CFC) Panels in the Unstructured Transmission Line Modelling (UTLM) Method
Authors:
Xuesong Meng,
Ana Vukovic,
Trevor M. Benson,
Phillip Sewell
Abstract:
An effective model of single and multilayered thin panels, including those formed using carbon fiber composite (CFC) materials, is incorporated into the Transmission Line Modeling (TLM) method. The thin panel model is a one-dimensional (1D) one based on analytical expansions of cotangent and cosecant functions that are used to describe the admittance matrix in the frequency domain; these are then…
▽ More
An effective model of single and multilayered thin panels, including those formed using carbon fiber composite (CFC) materials, is incorporated into the Transmission Line Modeling (TLM) method. The thin panel model is a one-dimensional (1D) one based on analytical expansions of cotangent and cosecant functions that are used to describe the admittance matrix in the frequency domain; these are then converted into the time domain by using digital filter theory and an inverse Z transform. The model, which is extended to allow for material anisotropy, is executed within 1D TLM codes. And, for the first time, the two-dimensional (2D) thin surface model is embedded in unstructured three-dimensional (3D) TLM codes. The approach is validated by using it to study some canonical structures with analytic solutions, and against results taken from the literature. It is then used to investigate shielding effectiveness of carbon fiber composite materials in a practical curved aerospace-related structure.
△ Less
Submitted 10 January, 2016;
originally announced January 2016.
-
Modeling Curved Carbon Fiber Composite (CFC) Structures in the Transmission-Line Modeling (TLM) Method
Authors:
Xuesong Meng,
Phillip Sewell,
Sendy Phang,
Ana Vukovic,
Trevor M. Benson
Abstract:
A new embedded model for curved thin panels is developed in the Transmission Line Modeling (TLM) method. In this model, curved panels are first linearized and then embedded between adjacent 2D TLM nodes allowing for arbitrary positioning between adjacent node centers. The embedded model eliminates the necessity for fine discretization thus reducing the run time and memory requirements for the calc…
▽ More
A new embedded model for curved thin panels is developed in the Transmission Line Modeling (TLM) method. In this model, curved panels are first linearized and then embedded between adjacent 2D TLM nodes allowing for arbitrary positioning between adjacent node centers. The embedded model eliminates the necessity for fine discretization thus reducing the run time and memory requirements for the calculation. The accuracy and convergence of the model are verified by comparing the resonant frequencies of an elliptical cylinder formed using carbon fiber composite (CFC) materials with those of the equivalent metal cylinder. Furthermore, the model is used to analyze the shielding performance of CFC airfoil NACA2415.
△ Less
Submitted 4 February, 2015;
originally announced February 2015.
