Showing 1–50 of 57 results for author: Valkama, M

UNILoc: Unified Localization Combining Model-Based Geometry and Unsupervised Learning

Authors: Yuhao Zhang, Guangjin Pan, Musa Furkan Keskin, Ossi Kaltiokallio, Mikko Valkama, Henk Wymeersch

Abstract: Accurate mobile device localization is critical for emerging 5G/6G applications such as autonomous vehicles and augmented reality. In this paper, we propose a unified localization method that integrates model-based and machine learning (ML)-based methods to reap their respective advantages by exploiting available map information. In order to avoid supervised learning, we generate training labels a… ▽ More Accurate mobile device localization is critical for emerging 5G/6G applications such as autonomous vehicles and augmented reality. In this paper, we propose a unified localization method that integrates model-based and machine learning (ML)-based methods to reap their respective advantages by exploiting available map information. In order to avoid supervised learning, we generate training labels automatically via optimal transport (OT) by fusing geometric estimates with building layouts. Ray-tracing based simulations are carried out to demonstrate that the proposed method significantly improves positioning accuracy for both line-of-sight (LoS) users (compared to ML-based methods) and non-line-of-sight (NLoS) users (compared to model-based methods). Remarkably, the unified method is able to achieve competitive overall performance with the fully-supervised fingerprinting, while eliminating the need for cumbersome labeled data measurement and collection. △ Less

Submitted 27 April, 2025; v1 submitted 24 April, 2025; originally announced April 2025.

Comments: 6 pages, submitted to IEEE conference

DECT-2020 NR Link Distance Performance in Varying Environments: Models and Measurements

Authors: Md Mohaiminul Haque, Joonas Sae, Juho Pirskanen, Mikko Valkama

Abstract: Digital Enhanced Cordless Telecommunications 2020 New Radio (DECT-2020 NR) has garnered recognition as an alternative for cellular 5G technology in the internet of things industry. This paper presents a study centered around the analysis of the link distance performance in varying environments for DECT-2020 NR. The study extensively examines and analyzes received signal strength indicator and resu… ▽ More Digital Enhanced Cordless Telecommunications 2020 New Radio (DECT-2020 NR) has garnered recognition as an alternative for cellular 5G technology in the internet of things industry. This paper presents a study centered around the analysis of the link distance performance in varying environments for DECT-2020 NR. The study extensively examines and analyzes received signal strength indicator and resulting path loss values in comparison with theoretical models, as well as packet success rates (SR) and signal-to-noise ratio against varying distances. The measurements show that with an SR of over 90%, an antenna height of 1.5 m, indoor link distances with a single device-to-device connection with 0 dBm transmission (TX) power can reach over 60 m in non-line-of-sight (NLOS) areas and up to 190 m in LOS areas with smaller -8 dBm TX power. Similarly, for outdoor use cases, link distances of over 600 m can be reached with +19 dBm TX power. △ Less

Submitted 4 March, 2025; v1 submitted 31 October, 2024; originally announced October 2024.

Comments: Submitted for publication in EuCAP-2025 conference, 5 pages, 5 figures, and 4 tables

Multicarrier ISAC: Advances in Waveform Design, Signal Processing and Learning under Non-Idealities

Authors: Visa Koivunen, Musa Furkan Keskin, Henk Wymeersch, Mikko Valkama, Nuria González-Prelcic

Abstract: This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna re… ▽ More This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna resources. Focusing on multicarrier (MC) systems, which represent the most widely used communication waveforms, it explores the co-design and optimization of waveforms alongside multiantenna transceiver signal processing for communications and both monostatic and bistatic sensing applications of ISAC. Moreover, techniques of high practical relevance for overcoming and even harnessing challenges posed by non-idealities in actual transceiver implementations are considered. To operate in highly dynamic radio environments and target scenarios, both model-based structured optimization and learning-based methodologies for ISAC systems are covered, assessing their adaptability and learning capabilities under real-world conditions. The paper presents trade-offs in communication-centric and radar-sensing-centric approaches, aiming for an optimized balance in densely used spectrum. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: To appear in IEEE Signal Processing Magazine

Integrated Monostatic Sensing and Full-Duplex Multiuser Communication for mmWave Systems

Authors: Murat Bayraktar, Nuria González-Prelcic, Mikko Valkama, Hao Chen, Charlie Jianzhong Zhang

Abstract: In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation… ▽ More In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation of self-interference (SI) caused by simultaneous transmission and reception at the FD base station (BS). Additionally, MU interference needs to be handled by the precoder/combiner design. The resulting optimization problem involves non-convex constraints since hybrid analog/digital architectures utilize networks of phase shifters. To solve the proposed problem, we separate the optimization of each precoder/combiner, and design each one of them while fixing the others. The precoders at the FD BS are designed by reformulating the communication and sensing constraints as signal-to-leakage-plus-noise ratio (SLNR) maximization problems that consider SI and MU interference as leakage. Furthermore, we design the frequency-flat analog combiner such that the residual SI at the FD BS is minimized under communication and sensing gain constraints. Finally, we design an interference-aware digital combining stage that separates MU signals and target reflections. The communication performance and sensing results show that the proposed framework efficiently supports both functionalities simultaneously. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 13 pages, 7 figures

HENO-MAC: Hybrid Energy Harvesting-based Energy Neutral Operation MAC Protocol for Delay-Sensitive IoT Applications

Authors: Sohail Sarang, Goran M Stojanović, Micheal Drieberg, Varun Jeoti, Mikko Valkama

Abstract: The Internet of Things (IoT) technology uses small and cost-effective sensors for various applications, such as Industrial IoT. However, these sensor nodes are powered by fixed-size batteries, which creates a trade-off between network performance and long-term sustainability. Moreover, some applications require the network to provide a certain level of service, such as a lower delay for critical d… ▽ More The Internet of Things (IoT) technology uses small and cost-effective sensors for various applications, such as Industrial IoT. However, these sensor nodes are powered by fixed-size batteries, which creates a trade-off between network performance and long-term sustainability. Moreover, some applications require the network to provide a certain level of service, such as a lower delay for critical data, while ensuring the operational reliability of sensor nodes. To address this energy challenge, external energy harvesting sources, such as solar and wind, offer promising and eco-friendly solutions. However, the available energy from a single energy source is insufficient to meet these requirements. This drives the utilization of a hybrid energy harvesting approach, such as the integration of solar and wind energy harvesters, to increase the amount of harvested energy. Nevertheless, to fully utilize the available energy, which is dynamic in nature, the sensor node must adapt its operation to ensure sustainable operation and enhanced network performance. Therefore, this paper proposes a hybrid energy harvesting-based energy neutral operation (ENO) medium access control (MAC) protocol, called HENO-MAC, that allows the receiver node to harvest energy from the solar-wind harvesters and adapt its duty cycle accordingly. The performance of the proposed HENO-MAC was evaluated using the latest realistic solar and wind data for two consecutive days in GreenCastalia. The simulation results demonstrate that the duty cycle mechanism of HENO-MAC effectively utilizes the harvested energy to achieve ENO and uses the available energy resources efficiently to reduce the packet delay for all packets and the highest priority packet by up to 28.5% and 27.3%, respectively, when compared with other existing MAC protocols. △ Less

Submitted 1 January, 2024; originally announced January 2024.

Comments: This paper has been accepted for presentation at the IEEE Wireless Communications and Networking Conference (WCNC) 2024

Iterated Posterior Linearization PMB Filter for 5G SLAM

Authors: Yu Ge, Yibo Wu, Fan Jiang, Ossi Kaltiokallio, Jukka Talvitie, Mikko Valkama, Lennart Svensson, Henk Wymeersch

Abstract: 5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and mapping (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To s… ▽ More 5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and mapping (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To solve this problem, existing 5G SLAM approaches rely on sigma-point or extended Kalman filters, linearizing the measurement function with respect to the prior probability density function (PDF). In this paper, we study the linearization of the measurement function with respect to the posterior PDF, and implement the iterated posterior linearization filter into the Poisson multi-Bernoulli SLAM filter. Simulation results demonstrate the accuracy and precision improvements of the resulting SLAM filter. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Phase Noise Resilient Three-Level Continuous-Phase Modulation for DFT-Spread OFDM

Authors: Markku Renfors, Ismael Peruga Nasarre, Toni Levanen, Mikko Valkama, Kari Pajukoski

Abstract: A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) signal model. 3MSK, is inspired by continuous-phase frequency shift keying (FSK), but it uses three frequencies in the baseband model -- specifically, 0 and… ▽ More A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) signal model. 3MSK, is inspired by continuous-phase frequency shift keying (FSK), but it uses three frequencies in the baseband model -- specifically, 0 and $\pm f_{symbol}/4$, where $f_{symbol}$ is the symbol rate -- which effectively constrains the phase transitions between consecutive symbols to 0 and $\pm π/2$ rad. Motivated by the phase controlled model of modulation, different degrees of phase continuity can be achieved, while supporting receiver processing with low complexity. The signal characteristics are improved by generating an initial time-domain nearly constant envelope signal at higher than the symbol rate. This helps to reach smooth phase transitions between 3MSK symbols. Also the possibility of using excess bandwidth is investigated by transmitting additional non-zero subcarriers outside active subcarriers of the basic DFT-s-OFDM model, which provides the capability to greatly reduce the PAPR. Due to the fact that the information is encoded in the phase transitions, a receiver model that tracks the phase variations without needing reference signals is developed. To this end, it is shown that this new modulation is well-suited for non-coherent receivers, even under strong phase noise (PN) conditions, thus allowing to reduce the overhead of reference signals. Evaluations of this physical-layer modulation and waveform scheme are performed in terms of transmitter metrics such as PAPR, OOB emissions and achievable output power after the power amplifier (PA). Finally, coded radio link evaluations are also shown and provided, demonstrating that 3MSK has a similar BER performance as that of traditional QPSK. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 14 pages, 17 figures. Submitted to IEEE Open Journal of the Communications Society

HybridDeepRx: Deep Learning Receiver for High-EVM Signals

Authors: Jaakko Pihlajasalo, Dani Korpi, Mikko Honkala, Janne M. J. Huttunen, Taneli Riihonen, Jukka Talvitie, Alberto Brihuega, Mikko A. Uusitalo, Mikko Valkama

Abstract: In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the… ▽ More In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Extensive set of numerical results is provided, in the context of 5G NR uplink incorporating also measured terminal power amplifier characteristics. The obtained results show that the proposed receiver system is able to clearly outperform classical linear receivers as well as existing ML receiver approaches, especially when the EVM is high in comparison with modulation order. The proposed ML receiver can thus facilitate pushing the terminal power amplifier (PA) systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage. △ Less

Submitted 30 June, 2021; originally announced June 2021.

Comments: To be presented in the 2021 IEEE International Symposium on Personal, Indoor and Mobile Radio Communications

DECT-2020 New Radio: The Next Step Towards 5G Massive Machine-Type Communications

Authors: Roman Kovalchukov, Dmitri Moltchanov, Juho Pirskanen, Joonas Sae, Jussi Numminen, Yevgeni Koucheryavy, Mikko Valkama

Abstract: Massive machine type communications (mMTC) is one of the cornerstone services that have to be supported by 5G systems. 3GPP has already introduced LTE-M and NB-IoT, often referred to as cellular IoT, in 3GPP Releases 13, 14, and 15 and submitted these technologies as part of 3GPP IMT-2020 (i.e., 5G) technology submission to ITU-R. Even though NB-IoT and LTE-M have shown to satisfy 5G mMTC requirem… ▽ More Massive machine type communications (mMTC) is one of the cornerstone services that have to be supported by 5G systems. 3GPP has already introduced LTE-M and NB-IoT, often referred to as cellular IoT, in 3GPP Releases 13, 14, and 15 and submitted these technologies as part of 3GPP IMT-2020 (i.e., 5G) technology submission to ITU-R. Even though NB-IoT and LTE-M have shown to satisfy 5G mMTC requirements defined by ITU-R, it is expected that these cellular IoT solutions will not address all aspects of IoT and ongoing digitalization, including the support for direct communication between "things" with flexible deployments, different business models, as well as support for even higher node densities and enhanced coverage. In this paper, we introduce the DECT-2020 standard recently published by ETSI for mMTC communications. We evaluate its performance and compare it to the existing LPWAN solutions showing that it outperforms those in terms of supported density of nodes while still keeping delay and loss guarantees at the required level. △ Less

Submitted 13 May, 2022; v1 submitted 18 January, 2021; originally announced January 2021.

Comments: Author-Submitted manuscript accepted for publication in the IEEE Communications Magazine, 7 pages, 5 figures, 1 table

Handling Spontaneous Traffic Variations in 5G+ via Offloading onto mmWave-Capable UAV `Bridges'

Authors: Nikita Tafintsev, Dmitri Moltchanov, Sergey Andreev, Shu-ping Yeh, Nageen Himayat, Yevgeni Koucheryavy, Mikko Valkama

Abstract: Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs tr… ▽ More Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs traveling over the area of interest to relieve congestion in 5G+ systems under spontaneous traffic fluctuations. To this end, we assess two inherently different offloading schemes, named routed and controlled UAV `bridging'. Using the tools of renewal theory and stochastic geometry, we analytically characterize these schemes in terms of the fraction of traffic demand that can be offloaded onto the UAV `bridge' as our parameter of interest. This framework accounts for the unique features of millimeter-wave (mmWave) radio propagation and city deployment types with potential line-of-sight (LoS) link blockage by buildings. We also introduce enhancements to the proposed schemes that significantly improve the offloading gains. Our findings offer evidence that the UAV `bridges' may be used for efficient traffic offloading in various urban scenarios. △ Less

Submitted 23 June, 2020; originally announced June 2020.

Comments: This work has been accepted for publication in the IEEE Transactions on Vehicular Technology

UAV-Aided Interference Assessment for Private 5G NR Deployments: Challenges and Solutions

Authors: Jani Urama, Richard Wiren, Olga Galinina, Juhani Kauppi, Kimmo Hiltunen, Juha Erkkilä, Fedor Chernogorov, Pentti Eteläaho, Marjo Heikkilä, Johan Torsner, Sergey Andreev, Mikko Valkama

Abstract: Industrial automation has created a high demand for private 5G networks, the deployment of which calls for an efficient and reliable solution to ensure strict compliance with the regulatory emission limits. While traditional methods for measuring outdoor interference include collecting real-world data by walking or driving, the use of unmanned aerial vehicles (UAVs) offers an attractive alternativ… ▽ More Industrial automation has created a high demand for private 5G networks, the deployment of which calls for an efficient and reliable solution to ensure strict compliance with the regulatory emission limits. While traditional methods for measuring outdoor interference include collecting real-world data by walking or driving, the use of unmanned aerial vehicles (UAVs) offers an attractive alternative due to their flexible mobility and adaptive altitude. As UAVs perform measurements quickly and semiautomatically, they can potentially assist in near realtime adjustments of the network configuration and fine-tuning its parameters, such as antenna settings and transmit power, as well as help improve indoor connectivity while respecting outdoor emission constraints. This article offers a firsthand tutorial on using aerial 5G emission assessment for interference management in nonpublic networks (NPNs) by reviewing the key challenges of UAV-mounted radio-scanner measurements. Particularly, we (i) outline the challenges of practical assessment of the outdoor interference originating from a local indoor 5G network while discussing regulatory and other related constraints and (ii) address practical methods and tools while summarizing the recent results of our measurement campaign. The reported proof of concept confirms that UAV-based systems represent a promising tool for capturing outdoor interference from private 5G systems. △ Less

Submitted 13 June, 2020; originally announced June 2020.

Comments: 7 pages, 4 figures

Novel Wake-up Scheme for Energy-Efficient Low-Latency Mobile Devices in 5G Networks

Authors: Soheil Rostami, Kari Heiska, Oleksandr Puchko, Kari Leppanen, Mikko Valkama

Abstract: Improved mobile device battery lifetime and latency mini-mization are critical requirements for enhancing the mobile broadband services and user experience. Long-term evolution (LTE) networks have adopted discontinuous reception (DRX) as the baseline solution for prolonged battery lifetime. However, in every DRX cycle, the mobile device baseband processing unit monitors and decodes the control sig… ▽ More Improved mobile device battery lifetime and latency mini-mization are critical requirements for enhancing the mobile broadband services and user experience. Long-term evolution (LTE) networks have adopted discontinuous reception (DRX) as the baseline solution for prolonged battery lifetime. However, in every DRX cycle, the mobile device baseband processing unit monitors and decodes the control signaling, and thus all instances without any actual data allocation leads to unnecessary energy consumption. This fact together with the long start-up and power-down times can prevent adopting frequent wake-up instants, which in turn leads to considerable latency. In this work,a novel wake-up scheme is described and studied, to tackle the trade-off between latency and battery lifetime in future 5G networks, seeking thus to facilitate an always-available experience, rather than always-on. Analytical and simulation-based results show that the proposed scheme is a promising approach to control the user plane latency and energy consumption, when the device is operating in the power saving mode. The aim of this article is to describe the overall wake-up system operating principle and the associated signaling methods,receiver processing solutions and essential implementation aspects. Additionally, the advantages compared to DRX-based systems are shown and demonstrated, through the analysis of the system energy-efficiency and latency characteristics, with special emphasis on future 5G-grade mobile devices △ Less

Submitted 3 January, 2020; originally announced January 2020.

Wake-Up Radio based Access in 5G under Delay Constraints: Modeling and Optimization

Authors: Soheil Rostami, Sandra Lagen, Mario Costa, Mikko Valkama, Paolo Dini

Abstract: Recently, the concept of wake-up radio based access has been considered as an effective power saving mechanism for 5G mobile devices. In this article, the average power consumption of a wake-up radio enabled mobile device is analyzed and modeled by using a semi-Markov process. Building on this, a delay-constrained optimization problem is then formulated, to maximize the device energy-efficiency un… ▽ More Recently, the concept of wake-up radio based access has been considered as an effective power saving mechanism for 5G mobile devices. In this article, the average power consumption of a wake-up radio enabled mobile device is analyzed and modeled by using a semi-Markov process. Building on this, a delay-constrained optimization problem is then formulated, to maximize the device energy-efficiency under given latency requirements, allowing the optimal parameters of the wake-up scheme to be obtained in closed form. The provided numerical results show that, for a given delay requirement, the proposed solution is able to reduce the power consumption by up to 40% compared with an optimized discontinuous reception (DRX) based reference scheme. △ Less

Submitted 11 November, 2019; originally announced November 2019.

Comments: accepted for publication in IEEE Trans. on Commun

Aerial Access and Backhaul in mmWave B5G Systems: Performance Dynamics and Optimization

Authors: Nikita Tafintsev, Dmitri Moltchanov, Mikhail Gerasimenko, Margarita Gapeyenko, Jing Zhu, Shu-ping Yeh, Nageen Himayat, Sergey Andreev, Yevgeni Koucheryavy, Mikko Valkama

Abstract: The use of unmanned aerial vehicle (UAV)-based communication in millimeter-wave (mmWave) frequencies to provide on-demand radio access is a promising approach to improve capacity and coverage in beyond-5G (B5G) systems. There are several design aspects to be addressed when optimizing for the deployment of such UAV base stations. As traffic demand of mobile users varies across time and space, dynam… ▽ More The use of unmanned aerial vehicle (UAV)-based communication in millimeter-wave (mmWave) frequencies to provide on-demand radio access is a promising approach to improve capacity and coverage in beyond-5G (B5G) systems. There are several design aspects to be addressed when optimizing for the deployment of such UAV base stations. As traffic demand of mobile users varies across time and space, dynamic algorithms that correspondingly adjust the UAV locations are essential to maximize performance. In addition to careful tracking of spatio-temporal user/traffic activity, such optimization needs to account for realistic backhaul constraints. In this work, we first review the latest 3GPP activities behind integrated access and backhaul system design, support for UAV base stations, and mmWave radio relaying functionality. We then compare static and mobile UAV-based communication options under practical assumptions on the mmWave system layout, mobility and clusterization of users, antenna array geometry, and dynamic backhauling. We demonstrate that leveraging the UAV mobility to serve moving users may improve the overall system performance even in the presence of backhaul capacity limitations. △ Less

Submitted 13 November, 2019; v1 submitted 4 November, 2019; originally announced November 2019.

Comments: 7 pages, 5 figures. This work has been accepted to IEEE Communications Magazine, 2019

Positioning and Location-Aware Communications for Modern Railways with 5G New Radio

Authors: Jukka Talvitie, Toni Levanen, Mike Koivisto, Tero Ihalainen, Kari Pajukoski, Mikko Valkama

Abstract: Providing high-capacity radio connectivity for high-speed trains (HSTs) is one of the most important use cases of emerging 5G New Radio (NR) networks. In this article, we show that 5G NR technology can also facilitate high-accuracy continuous localization and tracking of HSTs. Furthermore, we describe and demonstrate how the NR network can utilize the continuous location information for efficient… ▽ More Providing high-capacity radio connectivity for high-speed trains (HSTs) is one of the most important use cases of emerging 5G New Radio (NR) networks. In this article, we show that 5G NR technology can also facilitate high-accuracy continuous localization and tracking of HSTs. Furthermore, we describe and demonstrate how the NR network can utilize the continuous location information for efficient beam-management and beamforming, as well as for downlink Doppler precompensation in the single-frequency network context. Additionally, with particular focus on millimeter wave networks, novel concepts for low-latency intercarrier interference (ICI) estimation and compensation, due to residual Doppler and oscillator phase noise, are described and demonstrated. The provided numerical results at 30 GHz operating band show that sub-meter positioning and sub-degree beam-direction accuracies can be obtained with very high probabilities in the order of 95-99%. The results also show that the described Doppler precompensation and ICI estimation and cancellation methods substantially improve the throughput of the single-frequency HST network. △ Less

Submitted 6 May, 2019; v1 submitted 29 April, 2019; originally announced May 2019.

Comments: This article has been submitted to IEEE Communications Magazine for a publication. This is the first revised version of the original article and is now under second review round

Generalized Fast-Convolution-based Filtered-OFDM: Techniques and Application to 5G New Radio

Authors: Juha Yli-Kaakinen, Toni Levanen, Arto Palin, Markku Renfors, Mikko Valkama

Abstract: This paper proposes a generalized model and methods for fast-convolution (FC)-based waveform generation and processing with specific applications to fifth generation new radio (5G-NR). Following the progress of 5G-NR standardization in 3rd generation partnership project (3GPP), the main focus is on subband-filtered cyclic prefix (CP) orthogonal frequency-division multiplexing (OFDM) processing wit… ▽ More This paper proposes a generalized model and methods for fast-convolution (FC)-based waveform generation and processing with specific applications to fifth generation new radio (5G-NR). Following the progress of 5G-NR standardization in 3rd generation partnership project (3GPP), the main focus is on subband-filtered cyclic prefix (CP) orthogonal frequency-division multiplexing (OFDM) processing with specific emphasis on spectrally well localized transmitter processing. Subband filtering is able to suppress the interference leakage between adjacent subbands, thus supporting different numerologies for so-called bandwidth parts as well as asynchronous multiple access. The proposed generalized FC scheme effectively combines overlapped block processing with time- and frequency-domain windowing to provide highly selective subband filtering with very low intrinsic interference level. Jointly optimized multi-window designs with different allocation sizes and design parameters are compared in terms of interference levels and implementation complexity. The proposed methods are shown to clearly outperform the existing state-of-the-art windowing and filtering-based methods. △ Less

Submitted 15 February, 2020; v1 submitted 6 March, 2019; originally announced March 2019.

Comments: To appear in IEEE Transactions on Signal Processing

On Unified Vehicular Communications and Radar Sensing in Millimeter-Wave and Low Terahertz Bands

Authors: Vitaly Petrov, Gabor Fodor, Joonas Kokkoniemi, Dmitri Moltchanov, Janne Lehtomaki, Sergey Andreev, Yevgeni Koucheryavy, Markku Juntti, Mikko Valkama

Abstract: Future smart vehicles will incorporate high-data-rate communications and high-resolution radar sensing capabilities operating in the millimeter-wave and higher frequencies. These two systems are preparing to share and reuse a lot of common functionalities, such as steerable millimeter-wave antenna arrays. Motivated by this growing overlap, and advanced further by the space and cost constraints, th… ▽ More Future smart vehicles will incorporate high-data-rate communications and high-resolution radar sensing capabilities operating in the millimeter-wave and higher frequencies. These two systems are preparing to share and reuse a lot of common functionalities, such as steerable millimeter-wave antenna arrays. Motivated by this growing overlap, and advanced further by the space and cost constraints, the vehicular community is pursuing a vision of unified vehicular communications and radar sensing, which represents a major paradigm shift for next-generation connected and self-driving cars. This article outlines a path to materialize this decisive transformation. We begin by reviewing the latest developments in hybrid vehicular communications and radar systems, and then propose a concept of unified channel access over millimeter-wave and higher frequencies. Our supporting system-level performance characterization relies upon real-life measurements and massive ray-based modeling to confirm the significant improvements brought by our proposal to mitigating the interference and deafness effects. Since our results aim to open the door to unified vehicular communications and radar sensing, we conclude by outlining the potential research directions in this rapidly developing field. △ Less

Submitted 21 January, 2019; originally announced January 2019.

Comments: 8 pages, 5 figures, 1 table. The work has been accepted for publication in IEEE Wireless Communications, 2019

Positioning of High-speed Trains using 5G New Radio Synchronization Signals

Authors: Jukka Talvitie, Toni Levanen, Mike Koivisto, Kari Pajukoski, Markku Renfors, Mikko Valkama

Abstract: We study positioning of high-speed trains in 5G new radio (NR) networks by utilizing specific NR synchronization signals. The studies are based on simulations with 3GPP-specified radio channel models including path loss, shadowing and fast fading effects. The considered positioning approach exploits measurement of Time-Of-Arrival (TOA) and Angle-Of-Departure (AOD), which are estimated from beamfor… ▽ More We study positioning of high-speed trains in 5G new radio (NR) networks by utilizing specific NR synchronization signals. The studies are based on simulations with 3GPP-specified radio channel models including path loss, shadowing and fast fading effects. The considered positioning approach exploits measurement of Time-Of-Arrival (TOA) and Angle-Of-Departure (AOD), which are estimated from beamformed NR synchronization signals. Based on the given measurements and the assumed train movement model, the train position is tracked by using an Extended Kalman Filter (EKF), which is able to handle the non-linear relationship between the TOA and AOD measurements, and the estimated train position parameters. It is shown that in the considered scenario the TOA measurements are able to achieve better accuracy compared to the AOD measurements. However, as shown by the results, the best tracking performance is achieved, when both of the measurements are considered. In this case, a very high, sub-meter, tracking accuracy can be achieved for most (>75%) of the tracking time, thus achieving the positioning accuracy requirements envisioned for the 5G NR. The pursued high-accuracy and high-availability positioning technology is considered to be in a key role in several envisioned HST use cases, such as mission-critical autonomous train systems. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: 6 pages, 5 figures, IEEE WCNC 2018 (Wireless Communications and Networking Conference)

User Positioning in mmW 5G Networks using Beam-RSRP Measurements and Kalman Filtering

Authors: Elizaveta Rastorgueva-Foi, Mário Costa, Mike Koivisto, Kari Leppänen, Mikko Valkama

Abstract: In this paper, we exploit the 3D-beamforming features of multiantenna equipment employed in fifth generation (5G) networks, operating in the millimeter wave (mmW) band, for accurate positioning and tracking of users. We consider sequential estimation of users' positions, and propose a two-stage extended Kalman filter (EKF) that is based on reference signal received power (RSRP) measurements. In pa… ▽ More In this paper, we exploit the 3D-beamforming features of multiantenna equipment employed in fifth generation (5G) networks, operating in the millimeter wave (mmW) band, for accurate positioning and tracking of users. We consider sequential estimation of users' positions, and propose a two-stage extended Kalman filter (EKF) that is based on reference signal received power (RSRP) measurements. In particular, beamformed downlink (DL) reference signals (RS) are transmitted by multiple base stations (BSs) and measured by user equipmentn(UE) employing receive beamforming. The so-obtained BRSRP measurements are fed back to the BS where the corresponding direction-of-departure are sequentially estimated by a novel EKF. Such angle estimates from multiple BSs are subsequently fused on a central entity into 3D position estimates of UE by means of an angle-based EKF. The proposed positioning scheme is scalable since the computational burden is shared among different network entities, namely transmission/reception points (TRPs) and 5G-NR Node B (gNB), and may be accomplished with the signalling currently specified for 5G. We assess the performance of the proposed algorithm on a realistic outdoor 5G deployment with a detailed ray tracing propagation model based on the METIS Madrid map. Numerical results with a system operating at 39 GHz show that sub-meter 3D positioning accuracy is achievable in future mmW 5G networks. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 7 pages, 6 figure, submitted to FUSION 2018: 21st International Conference on Information Fusion

Caching-Aided Collaborative D2D Operation for Predictive Data Dissemination in Industrial IoT

Authors: Antonino Orsino, Roman Kovalchukov, Andrey Samuylov, Dmitri Moltchanov, Sergey Andreev, Yevgeni Koucheryavy, Mikko Valkama

Abstract: Industrial automation deployments constitute challenging environments where moving IoT machines may produce high-definition video and other heavy sensor data during surveying and inspection operations. Transporting massive contents to the edge network infrastructure and then eventually to the remote human operator requires reliable and high-rate radio links supported by intelligent data caching an… ▽ More Industrial automation deployments constitute challenging environments where moving IoT machines may produce high-definition video and other heavy sensor data during surveying and inspection operations. Transporting massive contents to the edge network infrastructure and then eventually to the remote human operator requires reliable and high-rate radio links supported by intelligent data caching and delivery mechanisms. In this work, we address the challenges of contents dissemination in characteristic factory automation scenarios by proposing to engage moving industrial machines as device-to-device (D2D) caching helpers. With the goal to improve reliability of high-rate millimeter-wave (mmWave) data connections, we introduce the alternative contents dissemination modes and then construct a novel mobility-aware methodology that helps develop predictive mode selection strategies based on the anticipated radio link conditions. We also conduct a thorough system-level evaluation of representative data dissemination strategies to confirm the benefits of predictive solutions that employ D2D-enabled collaborative caching at the wireless edge to lower contents delivery latency and improve data acquisition reliability. △ Less

Submitted 19 February, 2018; originally announced February 2018.

Energy Efficiency Maximization of Full-Duplex Two-Way Relay With Non-Ideal Power Amplifiers and Non-Negligible Circuit Power

Authors: Qimei Cui, Yuhao Zhang, Wei Ni, Mikko Valkama, Riku Jantti

Abstract: In this paper, we maximize the energy efficiency (EE) of full-duplex (FD) two-way relay (TWR) systems under non-ideal power amplifiers (PAs) and non-negligible transmission-dependent circuit power. We start with the case where only the relay operates full duplex and two timeslots are required for TWR. Then, we extend to the advanced case, where the relay and the two nodes all operate full duplex,… ▽ More In this paper, we maximize the energy efficiency (EE) of full-duplex (FD) two-way relay (TWR) systems under non-ideal power amplifiers (PAs) and non-negligible transmission-dependent circuit power. We start with the case where only the relay operates full duplex and two timeslots are required for TWR. Then, we extend to the advanced case, where the relay and the two nodes all operate full duplex, and accomplish TWR in a single timeslot. In both cases, we establish the intrinsic connections between the optimal transmit powers and durations, based on which the original non-convex EE maximization can be convexified and optimally solved. Simulations show the superiority of FD-TWR in terms of EE, especially when traffic demand is high. The simulations also reveal that the maximum EE of FD-TWR is more sensitive to the PA efficiency, than it is to self-cancellation. The full FD design of FD-TWR is susceptible to traffic imbalance, while the design with only the relay operating in the FD mode exhibits strong tolerance. △ Less

Submitted 5 January, 2018; originally announced January 2018.

Comments: 14 pages, 11 figures, IEEE Transactions on Wireless Communications

Journal ref: IEEE Transactions on Wireless Communications, vol. 16, no. 9, pp. 6264-6278, Sept. 2017

Estimation and Mitigation of Channel Non-Reciprocity in Massive MIMO

Authors: Orod Raeesi, Ahmet Gokceoglu, Mikko Valkama

Abstract: Time-division duplex (TDD) based massive MIMO systems rely on the reciprocity of the wireless propagation channels when calculating the downlink precoders based on uplink pilots. However, the effective uplink and downlink channels incorporating the analog radio front-ends of the base station (BS) and user equipments (UEs) exhibit non-reciprocity due to non-identical behavior of the individual tran… ▽ More Time-division duplex (TDD) based massive MIMO systems rely on the reciprocity of the wireless propagation channels when calculating the downlink precoders based on uplink pilots. However, the effective uplink and downlink channels incorporating the analog radio front-ends of the base station (BS) and user equipments (UEs) exhibit non-reciprocity due to non-identical behavior of the individual transmit and receive chains. When downlink precoder is not aware of such channel non-reciprocity (NRC), system performance can be significantly degraded due to NRC induced interference terms. In this work, we consider a general TDD-based massive MIMO system where frequency-response mismatches at both the BS and UEs, as well as the mutual coupling mismatch at the BS large-array system all coexist and induce channel NRC. Based on the NRC-impaired signal models, we first propose a novel iterative estimation method for acquiring both the BS and UE side NRC matrices and then also propose a novel NRC-aware downlink precoder design which utilizes the obtained estimates. Furthermore, an efficient pilot signaling scheme between the BS and UEs is introduced in order to facilitate executing the proposed estimation method and the NRC-aware precoding technique in practical systems. Comprehensive numerical results indicate substantially improved spectral efficiency performance when the proposed NRC estimation and NRC-aware precoding methods are adopted, compared to the existing state-of-the-art methods. △ Less

Submitted 14 June, 2017; originally announced June 2017.

Efficient Fast-Convolution-Based Waveform Processing for 5G Physical Layer

Authors: Juha Yli-Kaakinen, Toni Levanen, Sami Valkonen, Kari Pajukoski, Juho Pirskanen, Markku Renfors, Mikko Valkama

Abstract: This paper investigates the application of fast-convolution (FC) filtering schemes for flexible and effective waveform generation and processing in the fifth generation (5G) systems. FC-based filtering is presented as a generic multimode waveform processing engine while, following the progress of 5G new radio standardization in the Third-Generation Partnership Project, the main focus is on efficie… ▽ More This paper investigates the application of fast-convolution (FC) filtering schemes for flexible and effective waveform generation and processing in the fifth generation (5G) systems. FC-based filtering is presented as a generic multimode waveform processing engine while, following the progress of 5G new radio standardization in the Third-Generation Partnership Project, the main focus is on efficient generation and processing of subband-filtered cyclic prefix orthogonal frequency-division multiplexing (CP-OFDM) signals. First, a matrix model for analyzing FC filter processing responses is presented and used for designing optimized multiplexing of filtered groups of CP-OFDM physical resource blocks (PRBs) in a spectrally well-localized manner, i.e., with narrow guardbands. Subband filtering is able to suppress interference leakage between adjacent subbands, thus supporting independent waveform parametrization and different numerologies for different groups of PRBs, as well as asynchronous multiuser operation in uplink. These are central ingredients in the 5G waveform developments, particularly at sub-6-GHz bands. The FC filter optimization criterion is passband error vector magnitude minimization subject to a given subband band-limitation constraint. Optimized designs with different guardband widths, PRB group sizes, and essential design parameters are compared in terms of interference levels and implementation complexity. Finally, extensive coded 5G radio link simulation results are presented to compare the proposed approach with other subband-filtered CP-OFDM schemes and time-domain windowing methods, considering cases with different numerologies or asynchronous transmissions in adjacent subbands. Also the feasibility of using independent transmitter and receiver processing for CP-OFDM spectrum control is demonstrated. △ Less

Submitted 9 June, 2017; originally announced June 2017.

Journal ref: IEEE Journal on Selected Areas in Communications (Special Issue on Deployment Issues and Performance Challenges for 5G), vol. 35, no. 6, pp. 1309-1326, 2017

Parallel Digital Predistortion Design on Mobile GPU and Embedded Multicore CPU for Mobile Transmitters

Authors: Kaipeng Li, Amanullah Ghazi, Chance Tarver, Jani Boutellier, Mahmoud Abdelaziz, Lauri Anttila, Markku Juntti, Mikko Valkama, Joseph R. Cavallaro

Abstract: Digital predistortion (DPD) is a widely adopted baseband processing technique in current radio transmitters. While DPD can effectively suppress unwanted spurious spectrum emissions stemming from imperfections of analog RF and baseband electronics, it also introduces extra processing complexity and poses challenges on efficient and flexible implementations, especially for mobile cellular transmitte… ▽ More Digital predistortion (DPD) is a widely adopted baseband processing technique in current radio transmitters. While DPD can effectively suppress unwanted spurious spectrum emissions stemming from imperfections of analog RF and baseband electronics, it also introduces extra processing complexity and poses challenges on efficient and flexible implementations, especially for mobile cellular transmitters, considering their limited computing power compared to basestations. In this paper, we present high data rate implementations of broadband DPD on modern embedded processors, such as mobile GPU and multicore CPU, by taking advantage of emerging parallel computing techniques for exploiting their computing resources. We further verify the suppression effect of DPD experimentally on real radio hardware platforms. Performance evaluation results of our DPD design demonstrate the high efficacy of modern general purpose mobile processors on accelerating DPD processing for a mobile transmitter. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Spatio-Temporal Waveform Design for Multi-user Massive MIMO Downlink with 1-bit Receivers

Authors: Ahmet Gokceoglu, Emil Bjornson, Erik Larsson, Mikko Valkama

Abstract: Internet-of-Things (IoT) refers to a high-density network of low-cost low-bitrate terminals and sensors where also low energy consumption is one central feature. As the power-budget of classical receiver chains is dominated by the high-resolution analog-to-digital converters (ADCs), there is a growing interest towards deploying receiver architectures with reduced-bit or even 1-bit ADCs. In this pa… ▽ More Internet-of-Things (IoT) refers to a high-density network of low-cost low-bitrate terminals and sensors where also low energy consumption is one central feature. As the power-budget of classical receiver chains is dominated by the high-resolution analog-to-digital converters (ADCs), there is a growing interest towards deploying receiver architectures with reduced-bit or even 1-bit ADCs. In this paper, we study waveform design, optimization and detection aspects of multi-user massive MIMO downlink where user terminals adopt very simple 1-bit ADCs with oversampling. In order to achieve spectral efficiency higher than 1 bit/s/Hz per real-dimension, we propose a two-stage precoding, namely a novel quantization precoder followed by maximum-ratio transmission (MRT) or zero-forcing (ZF) type spatial channel precoder which jointly form the multi-user-multiantenna transmit waveform. The quantization precoder outputs are optimized, under appropriate transmitter and receiver filter bandwidth constraints, to provide controlled inter-symbol-interference (ISI) enabling the input symbols to be uniquely detected from 1-bit quantized observations with a low-complexity symbol detector in the absence of noise. An additional optimization constraint is also imposed in the quantization precoder design to increase the robustness against noise and residual inter-user-interference (IUI). The purpose of the spatial channel precoder, in turn, is to suppress the IUI and provide high beamforming gains such that good symbol-error rates (SERs) can be achieved in the presence of noise and interference. Extensive numerical evaluations illustrate that the proposed spatio-temporal precoder based multiantenna waveform design can facilitate good multi-user link performance, despite the extremely simple 1-bit ADCs in the receivers, hence being one possible enabling technology for the future low-complexity IoT networks. △ Less

Submitted 11 November, 2016; originally announced November 2016.

Performance Analysis of Multi-User Massive MIMO Downlink under Channel Non-Reciprocity and Imperfect CSI

Authors: Orod Raeesi, Ahmet Gokceoglu, Yaning Zou, Emil Björnson, Mikko Valkama

Abstract: This paper analyzes the performance of linearly precoded time division duplex based multi-user massive MIMO downlink system under joint impacts of channel non-reciprocity (NRC) and imperfect channel state information (CSI). We consider a generic and realistic NRC model that accounts for transceiver frequency-response as well as mutual coupling mismatches at both user equipment (UE) and base statio… ▽ More This paper analyzes the performance of linearly precoded time division duplex based multi-user massive MIMO downlink system under joint impacts of channel non-reciprocity (NRC) and imperfect channel state information (CSI). We consider a generic and realistic NRC model that accounts for transceiver frequency-response as well as mutual coupling mismatches at both user equipment (UE) and base station (BS) sides. The analysis covers two most prominent forms of linear precoding schemes, namely, zero-forcing (ZF) and maximum-ratio transmission (MRT), and assumes that only the statistical properties of the beamformed channel are used at the UE side to decode the received signal. Under the approximation of i.i.d. Gaussian channels, closed-form analytical expressions are derived for the effective signal to interference and noise ratios (SINRs) and the corresponding capacity lower bounds. The expressions show that, in moderate to high SNR, the additional interference caused by imperfect NRC calibration can degrade the performance of both precoders significantly. Moreover, ZF is shown to be more sensitive to NRC than MRT. Numerical evaluations with practical NRC levels indicate that this performance loss in the spectral efficiency can be as high as 42% for ZF, whereas it is typically less than 13% for MRT. It is also shown that due to the NRC, the asymptotic large-antenna performance of both precoders saturate to an identical finite level. The derived analytical expressions provide useful tools and valuable technical insight, e.g., into calculating the NRC calibration requirements in BSs and UEs for any given specific performance targets in terms of effective SINR or the system capacity bound. △ Less

Submitted 3 March, 2018; v1 submitted 21 October, 2016; originally announced October 2016.

High-Efficiency Device Positioning and Location-Aware Communications in Dense 5G Networks

Authors: Mike Koivisto, Aki Hakkarainen, Mário Costa, Petteri Kela, Kari Leppänen, Mikko Valkama

Abstract: In this article, the prospects and enabling technologies for high-efficiency device positioning and location-aware communications in emerging 5G networks are reviewed. We will first describe some key technical enablers and demonstrate by means of realistic ray-tracing and map based evaluations that positioning accuracies below one meter can be achieved by properly fusing direction and delay relate… ▽ More In this article, the prospects and enabling technologies for high-efficiency device positioning and location-aware communications in emerging 5G networks are reviewed. We will first describe some key technical enablers and demonstrate by means of realistic ray-tracing and map based evaluations that positioning accuracies below one meter can be achieved by properly fusing direction and delay related measurements on the network side, even when tracking moving devices. We will then discuss the possibilities and opportunities that such high-efficiency positioning capabilities can offer, not only for location-based services in general, but also for the radio access network itself. In particular, we will demonstrate that geometric location-based beamforming schemes become technically feasible, which can offer substantially reduced reference symbol overhead compared to classical full channel state information (CSI)-based beamforming. At the same time, substantial power savings can be realized in future wideband 5G networks where acquiring full CSI calls for wideband reference signals while location estimation and tracking can, in turn, be accomplished with narrowband pilots. △ Less

Submitted 23 April, 2017; v1 submitted 12 August, 2016; originally announced August 2016.

Comments: Accepted for publication in IEEE Communications Magazine in March 2017. This is the revised version of the original article, and it is in press at the moment. 8 pages, 6 figures

Joint 3D Positioning and Network Synchronization in 5G Ultra-Dense Networks Using UKF and EKF

Authors: Mike Koivisto, Mário Costa, Aki Hakkarainen, Kari Leppänen, Mikko Valkama

Abstract: It is commonly expected that future fifth generation (5G) networks will be deployed with a high spatial density of access nodes (ANs) in order to meet the envisioned capacity requirements of the upcoming wireless networks. Densification is beneficial not only for communications but it also creates a convenient infrastructure for highly accurate user node (UN) positioning. Despite the fact that pos… ▽ More It is commonly expected that future fifth generation (5G) networks will be deployed with a high spatial density of access nodes (ANs) in order to meet the envisioned capacity requirements of the upcoming wireless networks. Densification is beneficial not only for communications but it also creates a convenient infrastructure for highly accurate user node (UN) positioning. Despite the fact that positioning will play an important role in future networks, thus enabling a huge amount of location-based applications and services, this great opportunity has not been widely explored in the existing literature. Therefore, this paper proposes an unscented Kalman filter (UKF)-based method for estimating directions of arrival (DoAs) and times of arrival (ToA) at ANs as well as performing joint 3D positioning and network synchronization in a network-centric manner. In addition to the proposed UKF-based solution, the existing 2D extended Kalman filter (EKF)-based solution is extended to cover also realistic 3D positioning scenarios. Building on the premises of 5G ultra-dense networks (UDNs), the performance of both methods is evaluated and analysed in terms of DoA and ToA estimation as well as positioning and clock offset estimation accuracy, using the METIS map-based ray-tracing channel model and 3D trajectories for vehicles and unmanned aerial vehicles (UAVs) through the Madrid grid. Based on the comprehensive numerical evaluations, both proposed methods can provide the envisioned one meter 3D positioning accuracy even in the case of unsynchronized 5G network while simultaneously tracking the clock offsets of network elements with a nanosecond-scale accuracy. △ Less

Submitted 12 August, 2016; originally announced August 2016.

Comments: 10 pages, 4 figures

Low-Complexity Sub-band Digital Predistortion for Spurious Emission Suppression in Noncontiguous Spectrum Access

Authors: Mahmoud Abdelaziz, Lauri Anttila, Chance Tarver, Kaipeng Li, Joseph R. Cavallaro, Mikko Valkama

Abstract: Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing (FDD) transc… ▽ More Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing (FDD) transceivers. In this article, to suppress such unwanted emissions, a low-complexity sub-band DPD solution, specifically tailored for spectrally noncontiguous transmission schemes in low-cost devices, is proposed. The proposed technique aims at mitigating only the selected spurious intermodulation distortion components at the PA output, hence allowing for substantially reduced processing complexity compared to classical linearization solutions. Furthermore, novel decorrelation based parameter learning solutions are also proposed and formulated, which offer reduced computing complexity in parameter estimation as well as the ability to track time-varying features adaptively. Comprehensive simulation and RF measurement results are provided, using a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed solution in real world scenarios. The obtained results demonstrate that highly efficient spurious component suppression can be obtained using the proposed solutions. △ Less

Submitted 19 August, 2016; v1 submitted 8 July, 2016; originally announced July 2016.

Sum-Rate Analysis and Optimization of Self-Backhauling Based Full-Duplex Radio Access System

Authors: Dani Korpi, Taneli Riihonen, Ashutosh Sabharwal, Mikko Valkama

Abstract: In this article, a radio access system with a self-backhauling full-duplex access node serving legacy half-duplex mobile devices is studied and analyzed. In particular, it is assumed that the access node is using the same center frequency for all the transmissions, meaning that also the backhauling is done using the same frequency resources as the uplink and downlink transmissions. It is further a… ▽ More In this article, a radio access system with a self-backhauling full-duplex access node serving legacy half-duplex mobile devices is studied and analyzed. In particular, it is assumed that the access node is using the same center frequency for all the transmissions, meaning that also the backhauling is done using the same frequency resources as the uplink and downlink transmissions. It is further assumed that the access node has a massive array to facilitate efficient beamforming and self-interference nulling in its own receiver. As a starting point, the signal model for the considered access node is first derived, including all the transmitted and received signals within the cell. This is then used as a basis for obtaining the sum-rate expressions, which depict the overall rates experienced by the mobile users that are served by the access node. In addition, the data rate for the bi-directional backhaul link is also derived, since the access node must be able to backhaul itself wirelessly. The maximum achievable sum-rate is then determined by numerically solving an optimization problem constructed from the data rate expressions. The full-duplex scheme is also compared to two alternative transmission schemes, which perform all or some of the transmissions in half-duplex mode. The results show that the full-duplex capability of the access node is beneficial for maximizing the sum-rate, meaning that a simple half-duplex transmission scheme is typically not optimal. In particular, the highest sum-rate is usually provided by a relay type solution, where the access node acts as a full-duplex relay between the mobiles and the backhaul node. △ Less

Submitted 22 April, 2016; originally announced April 2016.

Comments: 30 pages, submitted for review

Joint Device Positioning and Clock Synchronization in 5G Ultra-Dense Networks

Authors: Mike Koivisto, Mário Costa, Janis Werner, Kari Heiska, Jukka Talvitie, Kari Leppänen, Visa Koivunen, Mikko Valkama

Abstract: In this article, we address the prospects and key enabling technologies for highly efficient and accurate device positioning and tracking in 5G radio access networks. Building on the premises of ultra-dense networks as well as on the adoption of multicarrier waveforms and antenna arrays in the access nodes (ANs), we first formulate extended Kalman filter (EKF)-based solutions for computationally e… ▽ More In this article, we address the prospects and key enabling technologies for highly efficient and accurate device positioning and tracking in 5G radio access networks. Building on the premises of ultra-dense networks as well as on the adoption of multicarrier waveforms and antenna arrays in the access nodes (ANs), we first formulate extended Kalman filter (EKF)-based solutions for computationally efficient joint estimation and tracking of the time of arrival (ToA) and direction of arrival (DoA) of the user nodes (UNs) using uplink reference signals. Then, a second EKF stage is proposed in order to fuse the individual DoA/ToA estimates from one or several ANs into a UN position estimate. Since all the processing takes place at the network side, the computing complexity and energy consumption at the UN side are kept to a minimum. The cascaded EKFs proposed in this article also take into account the unavoidable relative clock offsets between UNs and ANs, such that reliable clock synchronization of the access-link is obtained as a valuable by-product. The proposed cascaded EKF scheme is then revised and extended to more general and challenging scenarios where not only the UNs have clock offsets against the network time, but also the ANs themselves are not mutually synchronized in time. Finally, comprehensive performance evaluations of the proposed solutions on a realistic 5G network setup, building on the METIS project based outdoor Madrid map model together with complete ray tracing based propagation modeling, are provided. The obtained results clearly demonstrate that by using the developed methods, sub-meter scale positioning and tracking accuracy of moving devices is indeed technically feasible in future 5G radio access networks operating at sub-6GHz frequencies, despite the realistic assumptions related to clock offsets and potentially even under unsynchronized network elements. △ Less

Submitted 24 November, 2016; v1 submitted 12 April, 2016; originally announced April 2016.

Comments: Submitted to IEEE Transactions on Wireless Communications in March 2016. This is the revised version of the original article, and it is under review at the moment. 15 pages, 9 figures

K-Means Fingerprint Clustering for Low-Complexity Floor Estimation in Indoor Mobile Localization

Authors: Alireza Razavi, Mikko Valkama, Elena-Simona Lohan

Abstract: Indoor localization in multi-floor buildings is an important research problem. Finding the correct floor, in a fast and efficient manner, in a shopping mall or an unknown university building can save the users' search time and can enable a myriad of Location Based Services in the future. One of the most widely spread techniques for floor estimation in multi-floor buildings is the fingerprinting-ba… ▽ More Indoor localization in multi-floor buildings is an important research problem. Finding the correct floor, in a fast and efficient manner, in a shopping mall or an unknown university building can save the users' search time and can enable a myriad of Location Based Services in the future. One of the most widely spread techniques for floor estimation in multi-floor buildings is the fingerprinting-based localization using Received Signal Strength (RSS) measurements coming from indoor networks, such as WLAN and BLE. The clear advantage of RSS-based floor estimation is its ease of implementation on a multitude of mobile devices at the Application Programming Interface (API) level, because RSS values are directly accessible through API interface. However, the downside of a fingerprinting approach, especially for large-scale floor estimation and positioning solutions, is their need to store and transmit a huge amount of fingerprinting data. The problem becomes more severe when the localization is intended to be done on mobile devices which have limited memory, power, and computational resources. An alternative floor estimation method, which has lower complexity and is faster than the fingerprinting is the Weighted Centroid Localization (WCL) method. The trade-off is however paid in terms of a lower accuracy than the one obtained with traditional fingerprinting with Nearest Neighbour (NN) estimates. In this paper a novel K-means-based method for floor estimation via fingerprint clustering of WiFi and various other positioning sensor outputs is introduced. Our method achieves a floor estimation accuracy close to the one with NN fingerprinting, while significantly improves the complexity and the speed of the floor detection algorithm. The decrease in the database size is achieved through storing and transmitting only the cluster heads (CH's) and their corresponding floor labels. △ Less

Submitted 24 September, 2015; v1 submitted 4 September, 2015; originally announced September 2015.

Comments: Accepted to IEEE Globecom 2015, Workshop on Localization and Tracking: Indoors, Outdoors and Emerging Networks

Error Rate and Power Allocation Analysis of Regenerative Networks under Generalized Fading Conditions

Authors: Mulugeta K. Fikadu, Paschalis C. Sofotasios, Mikko Valkama, Qimei Cui, Sami Muhaidat, George K. Karagiannidis

Abstract: Cooperative communication has been shown to provide significant increase of transmission reliability and network capacity while expanding coverage in cellular networks. The present work is devoted to the investigation of the end-to-end performance and power allocation of a maximum-ratio-combining based regenerative multi-relay cooperative network over non-homogeneous scattering environment, whic… ▽ More Cooperative communication has been shown to provide significant increase of transmission reliability and network capacity while expanding coverage in cellular networks. The present work is devoted to the investigation of the end-to-end performance and power allocation of a maximum-ratio-combining based regenerative multi-relay cooperative network over non-homogeneous scattering environment, which is the case in realistic wireless communication scenarios. Novel analytic expressions are derived for the end-to-end symbol-error-rate of both $M-$ary Phase-Shift Keying and $M-$ary Quadrature Amplitude Modulation over independent and non-identically distributed generalized fading channels. The offered results are expressed in closed-form involving the Lauricella function and can be readily evaluated with the aid of a proposed computational algorithm. Simple expressions are also derived for the corresponding symbol-error-rate at asymptotically high signal-to-noise ratios. The derived expressions are corroborated with respective results from computer simulations and are subsequently employed in formulating a power optimization problem that enhances the system performance under total power constraints within the multi-relay cooperative system. Furthermore, it is shown that optimum power allocation provides substantial performance gains over equal power allocation, particularly, when the source-relay and relay-destination paths are highly unbalanced. △ Less

Submitted 29 July, 2015; originally announced July 2015.

Comments: 32 pages, 10 figures

Entropy and Channel Capacity under Optimum Power and Rate Adaptation over Generalized Fading Conditions

Authors: Paschalis C. Sofotasios, Sami Muhaidat, Mikko Valkama, Mounir Ghogho, George K. Karagiannidis

Abstract: Accurate fading characterization and channel capacity determination are of paramount importance in both conventional and emerging communication systems. The present work addresses the nonlinearity of the propagation medium and its effects on the channel capacity. Such fading conditions are first characterized using information theoretic measures, namely, Shannon entropy, cross entropy and relative… ▽ More Accurate fading characterization and channel capacity determination are of paramount importance in both conventional and emerging communication systems. The present work addresses the nonlinearity of the propagation medium and its effects on the channel capacity. Such fading conditions are first characterized using information theoretic measures, namely, Shannon entropy, cross entropy and relative entropy. The corresponding effects on the channel capacity with and without power adaptation are then analyzed. Closed-form expressions are derived and validated through comparisons with respective results from computer simulations. It is shown that the effects of fading nonlinearities are significantly larger than those of fading parameters such as the scattered-wave power ratio, and the correlation coefficient between the in-phase and quadrature components in each cluster of multipath components. △ Less

Submitted 28 December, 2016; v1 submitted 29 July, 2015; originally announced July 2015.

Comments: Latest/Priprint version

Analytic performance evaluation of M-QAM based decode-and-forward relay networks over enriched multipath fading channels

Authors: Mulugeta K. Fikadu, Paschalis C. Sofotasios, Qimei Cui, Mikko Valkama

Abstract: This work is devoted to the analysis of a regenerative multi-node dual-hop cooperative system over enriched multipath fading channels. Novel analytic expressions are derived for the symbol-error-rate for $M{-}$ary quadrature modulated signals in decode-and-forward relay systems over both independent and identically distributed as well as independent and non-identically distributed Nakagami${-}$q (… ▽ More This work is devoted to the analysis of a regenerative multi-node dual-hop cooperative system over enriched multipath fading channels. Novel analytic expressions are derived for the symbol-error-rate for $M{-}$ary quadrature modulated signals in decode-and-forward relay systems over both independent and identically distributed as well as independent and non-identically distributed Nakagami${-}$q (Hoyt) fading channels. The derived expressions are based on the moment-generating-function approach and are given in closed-form in terms of the generalized Lauricella series. The offered results are validated extensively through comparisons with respective results from computer simulations and are useful in the analytic performance evaluation of regenerative cooperative relay communication systems. To this end, it is shown that the performance of the cooperative system is, as expected, affected by the number of employed relays as well as by the value of the fading parameter $q$, which accounts for \textit{pre-Rayleigh} fading conditions that are often encountered in mobile cellular radio systems. △ Less

Submitted 28 December, 2016; v1 submitted 29 July, 2015; originally announced July 2015.

Comments: Latest/Priprint version

Compressive Detection of Random Subspace Signals

Authors: Alireza Razavi, Mikko Valkama, Danijela Cabric

Abstract: The problem of compressive detection of random subspace signals is studied. We consider signals modeled as $\mathbf{s} = \mathbf{H} \mathbf{x}$ where $\mathbf{H}$ is an $N \times K$ matrix with $K \le N$ and $\mathbf{x} \sim \mathcal{N}(\mathbf{0}_{K,1},σ_x^2 \mathbf{I}_K)$. We say that signal $\mathbf{s}$ lies in or leans toward a subspace if the largest eigenvalue of $\mathbf{H} \mathbf{H}^T$ is… ▽ More The problem of compressive detection of random subspace signals is studied. We consider signals modeled as $\mathbf{s} = \mathbf{H} \mathbf{x}$ where $\mathbf{H}$ is an $N \times K$ matrix with $K \le N$ and $\mathbf{x} \sim \mathcal{N}(\mathbf{0}_{K,1},σ_x^2 \mathbf{I}_K)$. We say that signal $\mathbf{s}$ lies in or leans toward a subspace if the largest eigenvalue of $\mathbf{H} \mathbf{H}^T$ is strictly greater than its smallest eigenvalue. We first design a measurement matrix $\mathbfΦ=[\mathbfΦ_s^T,\mathbfΦ_o^T]^T$ comprising of two sub-matrices $\mathbfΦ_s$ and $\mathbfΦ_o$ where $\mathbfΦ_s$ projects the signals to the strongest left-singular vectors, i.e., the left-singular vectors corresponding to the largest singular values, of subspace matrix $\mathbf{H}$ and $\mathbfΦ_o$ projects it to the weakest left-singular vectors. We then propose two detectors which work based on the difference in energies of the samples measured by two sub-matrices $\mathbfΦ_s$ and $\mathbfΦ_o$ and prove their optimality. Simplified versions of the proposed detectors for the case when the variance of noise is known are also provided. Furthermore, we study the performance of the detector when measurements are imprecise and show how imprecision can be compensated by employing more measurement devices. The problem is then re-formulated for the case when the signal lies in the union of a finite number of linear subspaces instead of a single linear subspace. Finally, we study the performance of the proposed methods by simulation examples. △ Less

Submitted 30 December, 2015; v1 submitted 10 July, 2015; originally announced July 2015.

Comments: 33 pages, 11 figures, Revised version

Compressive Identification of Active OFDM Subcarriers in Presence of Timing Offset

Authors: Alireza Razavi, Mikko Valkama, Danijela Cabric

Abstract: In this paper we study the problem of identifying active subcarriers in an OFDM signal from compressive measurements sampled at sub-Nyquist rate. The problem is of importance in Cognitive Radio systems when secondary users (SUs) are looking for available spectrum opportunities to communicate over them while sensing at Nyquist rate sampling can be costly or even impractical in case of very wide ban… ▽ More In this paper we study the problem of identifying active subcarriers in an OFDM signal from compressive measurements sampled at sub-Nyquist rate. The problem is of importance in Cognitive Radio systems when secondary users (SUs) are looking for available spectrum opportunities to communicate over them while sensing at Nyquist rate sampling can be costly or even impractical in case of very wide bandwidth. We first study the effect of timing offset and derive the necessary and sufficient conditions for signal recovery in the oracle-assisted case when the true active sub-carriers are assumed known. Then we propose an Orthogonal Matching Pursuit (OMP)-based joint sparse recovery method for identifying active subcarriers when the timing offset is known. Finally we extend the problem to the case of unknown timing offset and develop a joint dictionary learning and sparse approximation algorithm, where in the dictionary learning phase the timing offset is estimated and in the sparse approximation phase active subcarriers are identified. The obtained results demonstrate that active subcarrier identification can be carried out reliably, by using the developed framework. △ Less

Submitted 9 July, 2015; originally announced July 2015.

Comments: To appear in the proceedings of the IEEE Global Communications Conference (GLOBECOM) 2015

Exact Error Analysis and Energy-Efficiency Optimization of Regenerative Relay Systems with Spatial Correlation

Authors: Mulugeta K. Fikadu, Paschalis C. Sofotasios, Qimei Cui, Mikko Valkama, George K. Karagiannidis

Abstract: Energy efficiency and its optimization constitute critical tasks in the design of low-power wireless networks. The present work is devoted to the error rate analysis and energy-efficiency optimization of regenerative cooperative networks in the presence of multipath fading under spatial correlation. To this end, exact and asymptotic analytic expressions are firstly derived for the symbol-error-rat… ▽ More Energy efficiency and its optimization constitute critical tasks in the design of low-power wireless networks. The present work is devoted to the error rate analysis and energy-efficiency optimization of regenerative cooperative networks in the presence of multipath fading under spatial correlation. To this end, exact and asymptotic analytic expressions are firstly derived for the symbol-error-rate of $M{-}$ary quadrature amplitude and $M{-}$ary phase shift keying modulations assuming a dual-hop decode-and-forward relay system, spatially correlated Nakagami${-}m$ multipath fading and maximum ratio combining. The derived expressions are subsequently employed in quantifying the energy consumption of the considered system, incorporating both transmit energy and the energy consumed by the transceiver circuits, as well as in deriving the optimal power allocation formulation for minimizing energy consumption under certain quality-of-service requirements. A relatively harsh path-loss model, that also accounts for realistic device-to-device communications, is adopted in numerical evaluations and various useful insights are provided for the design of future low-energy wireless networks deployments. Indicatively, it is shown that depending on the degree of spatial correlation, severity of fading, transmission distance, relay location and power allocation strategy, target performance can be achieved with large overall energy reduction compared to direct transmission reference. △ Less

Submitted 2 June, 2015; originally announced June 2015.

Comments: 43 pages, 9 figures

Sensing of Unknown Signals over Weibull Fading Conditions

Authors: Paschalis C. Sofotasios, Mulugeta K. Fikadu, Khuong Ho-Van, Mikko Valkama

Abstract: Energy detection is a widely used method of spectrum sensing in cognitive radio and Radio Detection And Ranging (RADAR) systems. This paper is devoted to the analytical evaluation of the performance of an energy detector over Weibull fading channels. This is a flexible fading model that has been shown capable of providing accurate characterization of multipath fading in, e.g., typical cellular rad… ▽ More Energy detection is a widely used method of spectrum sensing in cognitive radio and Radio Detection And Ranging (RADAR) systems. This paper is devoted to the analytical evaluation of the performance of an energy detector over Weibull fading channels. This is a flexible fading model that has been shown capable of providing accurate characterization of multipath fading in, e.g., typical cellular radio frequency range of 800${/}$900 MHz. A novel analytic expression for the corresponding average probability of detection is derived in a simple algebraic representation which renders it convenient to handle both analytically and numerically. As expected, the performance of the detector is highly dependent upon the severity of fading as even small variation of the fading parameters affect significantly the value of the average probability of detection. This appears to be particularly the case in severe fading conditions. The offered results are useful in evaluating the effect of multipath fading in energy detection-based cognitive radio communication systems and therefore they can be used in quantifying the associated trade-offs between sensing performance and energy efficiency in cognitive radio networks. △ Less

Submitted 14 May, 2015; originally announced May 2015.

Comments: 16 pages. arXiv admin note: text overlap with arXiv:1505.03331

Analytic solutions to a Marcum Q-function-based integral and application in energy detection of unknown signals over multipath fading channels

Authors: Paschalis C. Sofotasios, Mikko Valkama, Theodoros A. Tsiftsis, Yury A. Brychkov, Steven Freear, George K. Karagiannidis

Abstract: This work presents analytic solutions for a useful integral in wireless communications, which involves the Marcum $Q{-}$function in combination with an exponential function and arbitrary power terms. The derived expressions have a rather simple algebraic representation which renders them convenient both analytically and computationally. Furthermore, they can be useful in wireless communications an… ▽ More This work presents analytic solutions for a useful integral in wireless communications, which involves the Marcum $Q{-}$function in combination with an exponential function and arbitrary power terms. The derived expressions have a rather simple algebraic representation which renders them convenient both analytically and computationally. Furthermore, they can be useful in wireless communications and particularly in the context of cognitive radio communications and radar systems, where this integral is often encountered. To this end, we derive novel expressions for the probability of detection in energy detection based spectrum sensing over $η{-}μ$ fading channels. These expressions are given in closed-form and are subsequently employed in analyzing the effects of generalised multipath fading conditions in cognitive radio systems. As expected, it is shown that the detector is highly dependent upon the severity of fading conditions as even slight variation of the fading parameters affect the corresponding performance significantly. △ Less

Submitted 28 December, 2016; v1 submitted 13 May, 2015; originally announced May 2015.

Comments: Latest/Preprint Version

The Area Under a Receiver Operating Characteristic Curve Over Enriched Multipath Fading Conditions

Authors: Paschalis C. Sofotasios, Mulugeta K. Fikadu, Khuong Ho-Van, Mikko Valkama, George K. Karagiannidis

Abstract: This work is devoted to the analysis of the performance of energy detection based spectrum sensing in the presence of enriched fading conditions which are distinct for the large number of multipath components and the lack of a dominant components. This type of fading conditions are characterized efficiently by the well known Nakagami${-}q$ or Hoyt distribution and the proposed analysis is carried… ▽ More This work is devoted to the analysis of the performance of energy detection based spectrum sensing in the presence of enriched fading conditions which are distinct for the large number of multipath components and the lack of a dominant components. This type of fading conditions are characterized efficiently by the well known Nakagami${-}q$ or Hoyt distribution and the proposed analysis is carried out in the context of the area under the receiver operating characteristics (ROC) curve (AUC). Unlike the widely used probability of detection metric, the AUC is a single metric and has been shown to be rather capable of evaluating the performance of a detector in applications relating to cognitive radio, radar systems and biomedical engineering, among others. Based on this, novel analytic expressions are derived for the average AUC and its complementary metric, average CAUC, for both integer and fractional values of the involved time-bandwidth product. The derived expressions have a tractable algebraic representation which renders them convenient to handle both analytically and numerically. Based on this, they are employed in analyzing the behavior of energy detection based spectrum sensing over enriched fading conditions for different severity scenarios, which demonstrates that the performance of energy detectors is, as expected, closely related to the value of the fading parameter $q$. △ Less

Submitted 28 December, 2016; v1 submitted 13 May, 2015; originally announced May 2015.

Comments: Latest/Priprint version. arXiv admin note: text overlap with arXiv:1505.03700

Wideband Self-Adaptive RF Cancellation Circuit for Full-Duplex Radio: Operating Principle and Measurements

Authors: Timo Huusari, Yang-Seok Choi, Petteri Liikkanen, Dani Korpi, Shilpa Talwar, Mikko Valkama

Abstract: This paper presents a novel RF circuit architecture for self-interference cancellation in inband full-duplex radio transceivers. The developed canceller is able to provide wideband cancellation with waveform bandwidths in the order of 100 MHz or beyond and contains also self-adaptive or self-healing features enabling automatic tracking of time-varying self-interference channel characteristics. In… ▽ More This paper presents a novel RF circuit architecture for self-interference cancellation in inband full-duplex radio transceivers. The developed canceller is able to provide wideband cancellation with waveform bandwidths in the order of 100 MHz or beyond and contains also self-adaptive or self-healing features enabling automatic tracking of time-varying self-interference channel characteristics. In addition to architecture and operating principle descriptions, we also provide actual RF measurements at 2.4 GHz ISM band demonstrating the achievable cancellation levels with different bandwidths and when operating in different antenna configurations and under low-cost highly nonlinear power amplifier. In a very challenging example with a 100 MHz waveform bandwidth, around 41 dB total cancellation is obtained while the corresponding cancellation figure is close to 60 dB with the more conventional 20 MHz carrier bandwidth. Also, efficient tracking in time-varying reflection scenarios is demonstrated. △ Less

Submitted 10 March, 2015; originally announced March 2015.

Comments: 7 pages, to be presented in 2015 IEEE 81st Vehicular Technology Conference

Covariance-Based OFDM Spectrum Sensing with Sub-Nyquist Samples

Authors: Alireza Razavi, Mikko Valkama, Danijela Cabric

Abstract: In this paper, we propose a feature-based method for spectrum sensing of OFDM signals from sub-Nyquist samples over a single band. We exploit the structure of the covariance matrix of OFDM signals to convert an underdetermined set of covariance-based equations to an overdetermined one. The statistical properties of sample covariance matrix are analyzed and then based on that an approximate General… ▽ More In this paper, we propose a feature-based method for spectrum sensing of OFDM signals from sub-Nyquist samples over a single band. We exploit the structure of the covariance matrix of OFDM signals to convert an underdetermined set of covariance-based equations to an overdetermined one. The statistical properties of sample covariance matrix are analyzed and then based on that an approximate Generalized Likelihood Ratio Test (GLRT) for detection of OFDM signals from sub-Nyquist samples is derived. The method is also extended to the frequency-selective channels. △ Less

Submitted 10 January, 2015; originally announced January 2015.

Comments: 30 pages, 5 figures

Journal ref: Signal Processing, Volume 109, April 2015, Pages 261-268

Analysis and Design Specifications for Full-Duplex Radio Transceivers under RF Oscillator Phase-Noise with Arbitrary Spectral Shape

Authors: Ville Syrjälä, Koji Yamamoto, Mikko Valkama

Abstract: In this paper, the effects of oscillator phase-noise with arbitrary spectral characteristics on self-interference cancellation capability of a full-duplex radio transceiver are addressed, and design considerations are given for oscillator designers for optimized PLL design for full-duplex radio application. The paper first gives a full-duplex transceiver model that inherently mitigates most of the… ▽ More In this paper, the effects of oscillator phase-noise with arbitrary spectral characteristics on self-interference cancellation capability of a full-duplex radio transceiver are addressed, and design considerations are given for oscillator designers for optimized PLL design for full-duplex radio application. The paper first gives a full-duplex transceiver model that inherently mitigates most of the phase-noise effect from the self-interference signal. The remaining effect of the phase noise is then analysed. Closed-form solutions for the self-interference power are then derived. In the simulations part, a practical phase-locked loop type oscillator is used, which is based on the arbitrary mask phase-noise model. Analytical derivations are verified with the simulations, and the self-interference cancellation performance is thoroughly studied with various parameters. Design considerations are finally given for oscillator design for full-duplex radio transceivers, with the help of tangible parameters of the phase-locked loop type oscillators. △ Less

Submitted 3 December, 2014; originally announced December 2014.

Comments: Submitted to IEEE Transactions on Vehicular Technology

Full-Duplex Mobile Device - Pushing the Limits

Authors: Dani Korpi, Joose Tamminen, Matias Turunen, Timo Huusari, Yang-Seok Choi, Lauri Anttila, Shilpa Talwar, Mikko Valkama

Abstract: In this article, we address the challenges of transmitter-receiver isolation in \emph{mobile full-duplex devices}, building on shared-antenna based transceiver architecture. Firstly, self-adaptive analog RF cancellation circuitry is required, since the capability to track time-varying self-interference coupling characteristics is of utmost importance in mobile devices. In addition, novel adaptive… ▽ More In this article, we address the challenges of transmitter-receiver isolation in \emph{mobile full-duplex devices}, building on shared-antenna based transceiver architecture. Firstly, self-adaptive analog RF cancellation circuitry is required, since the capability to track time-varying self-interference coupling characteristics is of utmost importance in mobile devices. In addition, novel adaptive nonlinear DSP methods are also required for final self-interference suppression at digital baseband, since mobile-scale devices typically operate under highly nonlinear low-cost RF components. In addition to describing above kind of advanced circuit and signal processing solutions, comprehensive RF measurement results from a complete demonstrator implementation are also provided, evidencing beyond 40~dB of active RF cancellation over an 80 MHz waveform bandwidth with a highly nonlinear transmitter power amplifier. Measured examples also demonstrate the good self-healing characteristics of the developed control loop against fast changes in the coupling channel. Furthermore, when complemented with nonlinear digital cancellation processing, the residual self-interference level is pushed down to the noise floor of the demonstration system, despite the harsh nonlinear nature of the self-interference. These findings indicate that deploying the full-duplex principle can indeed be feasible also in mobile devices, and thus be one potential technology in, e.g., 5G and beyond radio systems. △ Less

Submitted 16 May, 2016; v1 submitted 13 October, 2014; originally announced October 2014.

Comments: 18 pages, submitted for review

Impact of Received Signal on Self-interference Channel Estimation and Achievable Rates in In-band Full-duplex Transceivers

Authors: Dani Korpi, Lauri Anttila, Mikko Valkama

Abstract: In this paper we analyze the effect of the calibration period, or lack of, on self-interference channel estimation in the digital domain of in-band full-duplex radio transceivers. In particular, we consider a scenario where the channel estimation must be performed without a separate calibration period, which means that the received signal of interest will act as an additional noise source from the… ▽ More In this paper we analyze the effect of the calibration period, or lack of, on self-interference channel estimation in the digital domain of in-band full-duplex radio transceivers. In particular, we consider a scenario where the channel estimation must be performed without a separate calibration period, which means that the received signal of interest will act as an additional noise source from the estimation perspective. We will explicitly analyze its effect, and quantify the increase in the parameter estimation variance, or sample size, if similar accuracy for the channel estimate is to be achieved as with a separate calibration period. In addition, we will analyze how the calibration period, or its absence, affects the overall achievable rates. Full waveform simulations are then used to determine the validity of the obtained results, as well as provide numerical results regarding the achievable rates. It is shown that, even though a substantial increase in the parameter sample size is required if there is no calibration period, the achievable rates are still comparable for the two scenarios. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 8 pages, to be presented in the Asilomar Conference on Signals, Systems, and Computers in November 2014

Feasibility of In-band Full-Duplex Radio Transceivers with Imperfect RF Components: Analysis and Enhanced Cancellation Algorithms

Authors: Dani Korpi, Lauri Anttila, Mikko Valkama

Abstract: In this paper we provide an overview regarding the feasibility of in-band full-duplex transceivers under imperfect RF components. We utilize results and findings from the recent research on full-duplex communications, while introducing also transmitter-induced thermal noise into the analysis. This means that the model of the RF impairments used in this paper is the most comprehensive thus far. By… ▽ More In this paper we provide an overview regarding the feasibility of in-band full-duplex transceivers under imperfect RF components. We utilize results and findings from the recent research on full-duplex communications, while introducing also transmitter-induced thermal noise into the analysis. This means that the model of the RF impairments used in this paper is the most comprehensive thus far. By assuming realistic parameter values for the different transceiver components, it is shown that IQ imaging and transmitter-induced nonlinearities are the most significant sources of distortion in in-band full-duplex transceivers, in addition to linear self-interference. Motivated by this, we propose a novel augmented nonlinear digital self-interference canceller that is able to model and hence suppress all the essential transmitter imperfections jointly. This is also verified and demonstrated by extensive waveform simulations. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 7 pages, presented in the CROWNCOM 2014 conference

Journal ref: Proceedings of the 9th International Conference on Cognitive Radio Oriented Wireless Networks and Communications (CROWNCOM), pp. 532-538, June 2014

Analysis and Augmented Spatial Processing for Uplink OFDMA MU-MIMO Receiver with Transceiver I/Q Imbalance and External Interference

Authors: Aki Hakkarainen, Janis Werner, Kapil R. Dandekar, Mikko Valkama

Abstract: We address receiver (RX) signal processing in MIMO systems under in-phase/quadrature (I/Q) imbalance, which causes cross-talk of mirror-subcarriers in OFDM systems. We extend the typically reported single-user studies to uplink OFDMA-based multiuser MIMO, with simultaneous user multiplexing in frequency and spatial domains. We also incorporate multiple external interferers, for modeling challengin… ▽ More We address receiver (RX) signal processing in MIMO systems under in-phase/quadrature (I/Q) imbalance, which causes cross-talk of mirror-subcarriers in OFDM systems. We extend the typically reported single-user studies to uplink OFDMA-based multiuser MIMO, with simultaneous user multiplexing in frequency and spatial domains. We also incorporate multiple external interferers, for modeling challenging conditions in heterogeneous networks. In the signal processing developments, we exploit the augmented subcarrier processing, which processes each subcarrier jointly with its counterpart at the image subcarrier, and jointly across RX antennas. Furthermore, we derive an augmented LMMSE RX. The novel approach integrates the I/Q imbalance mitigation, interference suppression and data stream separation into a single processing stage, thus avoiding a separate transceiver calibration. Our numerical results show the signal-to-interference-plus-noise ratio and symbol-error rate of an arbitrary data stream after RX processing as a function of different system parameters. The per-subcarrier processing is shown to suffer heavily under I/Q imbalances, and being particularly sensitive to external interferers, whereas the augmented method provides efficient data stream separation and interference suppression. Finally, we extend the studies to massive MIMO framework and show that the per-subcarrier processing still suffers from performance degradation, whereas the augmented approach can fully exploit the array gain. △ Less

Submitted 25 February, 2016; v1 submitted 2 July, 2014; originally announced July 2014.

Comments: IEEE Transactions on Wireless Communications, 2016, 18 pages, 13 figures, 4 tables

Modeling and Efficient Cancellation of Nonlinear Self-Interference in MIMO Full-Duplex Transceivers

Authors: Lauri Anttila, Dani Korpi, Emilio Antonio-Rodríguez, Risto Wichman, Mikko Valkama

Abstract: This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addit… ▽ More This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addition to the multipath self-interference propagation channels and the analog RF cancellation stage. The proposed solution is the first cancellation technique in the literature which can handle such a self-interference scenario. It is shown by comprehensive simulations with realistic RF component parameters and with two different PA models to clearly outperform the current state-of-the-art digital self-interference cancellers, and to clearly extend the usable transmit power range. △ Less

Submitted 10 October, 2014; v1 submitted 3 June, 2014; originally announced June 2014.

Comments: 7 pages, 5 figures. To be presented in the 2014 International Workshop on Emerging Technologies for 5G Wireless Cellular Networks

Reference Receiver Based Digital Self-Interference Cancellation in MIMO Full-Duplex Transceivers

Authors: Dani Korpi, Lauri Anttila, Mikko Valkama

Abstract: In this paper we propose and analyze a novel self-interference cancellation structure for in-band MIMO full-duplex transceivers. The proposed structure utilizes reference receiver chains to obtain reference signals for digital self-interference cancellation, which means that all the transmitter-induced nonidealities will be included in the digital cancellation signal. To the best of our knowledge,… ▽ More In this paper we propose and analyze a novel self-interference cancellation structure for in-band MIMO full-duplex transceivers. The proposed structure utilizes reference receiver chains to obtain reference signals for digital self-interference cancellation, which means that all the transmitter-induced nonidealities will be included in the digital cancellation signal. To the best of our knowledge, this type of a structure has not been discussed before in the context of full-duplex transceivers. First, we will analyze the overall achievable performance of the proposed cancellation scheme, while also providing some insight into the possible bottlenecks. We also provide a detailed formulation of the actual cancellation procedure, and perform an analysis into the effect of the received signal of interest on self-interference coupling channel estimation. The achieved performance of the proposed reference receiver based digital cancellation procedure is then assessed and verified with full waveform simulations. The analysis and waveform simulation results show that under practical transmitter RF/analog impairment levels, the proposed reference receiver based cancellation architecture can provide substantially better self-interference suppression than any existing solution, despite deploying only low-complexity linear digital processing. △ Less

Submitted 10 October, 2014; v1 submitted 9 May, 2014; originally announced May 2014.

Comments: 7 pages, 4 figures. To be presented in the 2014 IEEE Broadband Wireless Access Workshop