Showing 1–11 of 11 results for author: Vîlcu, C

Skeletal Cut Loci on Convex Polyhedra

Authors: Joseph O'Rourke, Costin Vilcu

Abstract: On a convex polyhedron P, the cut locus C(x) with respect to a point x is a tree of geodesic segments (shortest paths) on P that includes every vertex. We say that P has a skeletal cut locus if there is some x in P such that C(x) subset Sk(P), where Sk(P) is the 1-skeleton of P. At a first glance, there seems to be very little relation between the cut locus and the 1-skeleton, as the first one is… ▽ More On a convex polyhedron P, the cut locus C(x) with respect to a point x is a tree of geodesic segments (shortest paths) on P that includes every vertex. We say that P has a skeletal cut locus if there is some x in P such that C(x) subset Sk(P), where Sk(P) is the 1-skeleton of P. At a first glance, there seems to be very little relation between the cut locus and the 1-skeleton, as the first one is an intrinsic geometry notion, and the second one specifies the combinatorics of P. In this paper we study skeletal cut loci, obtaining four main results. First, given any combinatorial tree T, there exists a convex polyhedron P and a point x in P with a cut locus that lies in Sk(P), and whose combinatorics match T. Second, any (non-degenerate) polyhedron P has at most a finite number of points x for which C(x) subset Sk(P). Third, we show that almost all polyhedra have no skeletal cut locus. Fourth, we provide a combinatorial restriction to the existence of skeletal cut loci. Because the source unfolding of P with respect to x is always a non-overlapping net for P, and because the boundary of the source unfolding is the (unfolded) cut locus, source unfoldings of polyhedra with skeletal cut loci are edge-unfoldings, and moreover "blooming," avoiding self-intersection during an unfolding process. We also explore partially skeletal cut loci, leading to partial edge-unfoldings; i.e., unfoldings obtained by cutting along some polyhedron edges and cutting some non-edges. △ Less

Submitted 24 June, 2025; v1 submitted 3 December, 2023; originally announced December 2023.

Comments: 47 pages, 31 figures, 11 references. v2: Minor improvements. v3: More than doubled the length. Includes deg-2 nodes, and partially skeletal cut loci

MSC Class: 52B10; 52C99 ACM Class: F.2.2; G.2.2

Simple Closed Quasigeodesics on Tetrahedra

Authors: Joseph O'Rourke, Costin Vilcu

Abstract: Pogorelov proved in 1949 that every every convex polyhedron has at least three simple closed quasigeodesics. Whereas a geodesic has exactly pi surface angle to either side at each point, a quasigeodesic has at most pi surface angle to either side at each point. Pogorelov's existence proof did not suggest a way to identify the three quasigeodesics, and it is only recently that a finite algorithm ha… ▽ More Pogorelov proved in 1949 that every every convex polyhedron has at least three simple closed quasigeodesics. Whereas a geodesic has exactly pi surface angle to either side at each point, a quasigeodesic has at most pi surface angle to either side at each point. Pogorelov's existence proof did not suggest a way to identify the three quasigeodesics, and it is only recently that a finite algorithm has been proposed. Here we identify three simple closed quasigeodesics on any tetrahedron: at least one through 1 vertex, at least one through 2 vertices, and at least one through 3 vertices. The only exception is that isosceles tetrahedra have simple closed geodesics but do not have a 1-vertex quasigeodesic. We also identify an infinite class of tetrahedra that each have at least 34 simple closed quasigeodesics. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 34 pages, 17 figures, 16 references. Incorporates arXiv:2109.07444 in Section 5

MSC Class: 51M20; 52B05; 52B10 ACM Class: F.2.2; G.2.2

Reshaping Convex Polyhedra

Authors: Joseph O'Rourke, Costin Vilcu

Abstract: Given a convex polyhedral surface P, we define a tailoring as excising from P a simple polygonal domain that contains one vertex v, and whose boundary can be sutured closed to a new convex polyhedron via Alexandrov's Gluing Theorem. In particular, a digon-tailoring cuts off from P a digon containing v, a subset of P bounded by two equal-length geodesic segments that share endpoints, and can then z… ▽ More Given a convex polyhedral surface P, we define a tailoring as excising from P a simple polygonal domain that contains one vertex v, and whose boundary can be sutured closed to a new convex polyhedron via Alexandrov's Gluing Theorem. In particular, a digon-tailoring cuts off from P a digon containing v, a subset of P bounded by two equal-length geodesic segments that share endpoints, and can then zip closed. In the first part of this monograph, we primarily study properties of the tailoring operation on convex polyhedra. We show that P can be reshaped to any polyhedral convex surface Q a subset of conv(P) by a sequence of tailorings. This investigation uncovered previously unexplored topics, including a notion of unfolding of Q onto P--cutting up Q into pieces pasted non-overlapping onto P, and to continuously folding P onto Q. In the second part of this monograph, we study vertex-merging processes on convex polyhedra (each vertex-merge being in a sense the reverse of a digon-tailoring), creating embeddings of P into enlarged surfaces. We aim to produce non-overlapping polyhedral and planar unfoldings, which led us to develop an apparently new theory of convex sets, and of minimal length enclosing polygons, on convex polyhedra. All our theorem proofs are constructive, implying polynomial-time algorithms. △ Less

Submitted 21 May, 2022; v1 submitted 7 July, 2021; originally announced July 2021.

Comments: Research monograph. 236 pages, 107 figures, 60 references. arXiv admin note: text overlap with arXiv:2008.01759. v2 adds a new section 9.3 P Continuously Folding onto Q

MSC Class: 52A15; 52B10; 52C45; 53C45; 68U05 (Primary); 52-02; 52-08; 52A37; 52C99 (Secondary) ACM Class: F.2.2; G.2.2

Cut Locus Realizations on Convex Polyhedra

Authors: Joseph O'Rourke, Costin Vîlcu

Abstract: We prove that every positively-weighted tree T can be realized as the cut locus C(x) of a point x on a convex polyhedron P, with T weights matching C(x) lengths. If T has n leaves, P has (in general) n+1 vertices. We show there are in fact a continuum of polyhedra P each realizing T for some x on P. Three main tools in the proof are properties of the star unfolding of P, Alexandrov's gluing theore… ▽ More We prove that every positively-weighted tree T can be realized as the cut locus C(x) of a point x on a convex polyhedron P, with T weights matching C(x) lengths. If T has n leaves, P has (in general) n+1 vertices. We show there are in fact a continuum of polyhedra P each realizing T for some x on P. Three main tools in the proof are properties of the star unfolding of P, Alexandrov's gluing theorem, and a cut-locus partition lemma. The construction of P from T is surprisingly simple. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Comments: 16 pages, 7 figures, 16 references

MSC Class: 52B10; 52C99 ACM Class: F.2.2; G.2.2

Tailoring for Every Body: Reshaping Convex Polyhedra

Authors: Joseph O'Rourke, Costin Vilcu

Abstract: Given any two convex polyhedra P and Q, we prove as one of our main results that the surface of P can be reshaped to a homothet of Q by a finite sequence of "tailoring" steps. Each tailoring excises a digon surrounding a single vertex and sutures the digon closed. One phrasing of this result is that, if Q can be "sculpted" from P by a series of slices with planes, then Q can be tailored from P. An… ▽ More Given any two convex polyhedra P and Q, we prove as one of our main results that the surface of P can be reshaped to a homothet of Q by a finite sequence of "tailoring" steps. Each tailoring excises a digon surrounding a single vertex and sutures the digon closed. One phrasing of this result is that, if Q can be "sculpted" from P by a series of slices with planes, then Q can be tailored from P. And there is a sense in which tailoring is finer than sculpting in that P may be tailored to polyhedra that are not achievable by sculpting P. It is an easy corollary that, if S is the surface of any convex body, then any convex polyhedron P may be tailored to approximate a homothet of S as closely as desired. So P can be "whittled" to e.g., a sphere S. Another main result achieves the same reshaping, but by excising more complicated shapes we call "crests," still each enclosing one vertex. Reversing either digon-tailoring or crest-tailoring leads to proofs that any Q inside P can be enlarged to P by cutting Q and inserting and sealing surface patches. One surprising corollary of these results is that, for Q a subset of P, we can cut-up Q into pieces and paste them non-overlapping onto an isometric subset of P. This can be viewed as a form of "unfolding" Q onto P. All our proofs are constructive, and lead to polynomial-time algorithms. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 62 pages, 28 figures, 24 references

MSC Class: 52B10; 52C99 ACM Class: F.2.2; G.2.2

Source Unfoldings of Convex Polyhedra via Certain Closed Curves

Authors: Jin-ichi Itoh, Joseph O'Rourke, Costin Vilcu

Abstract: We extend the notion of a source unfolding of a convex polyhedron P to be based on a closed polygonal curve Q in a particular class rather than based on a point. The class requires that Q "lives on a cone" to both sides; it includes simple, closed quasigeodesics. Cutting a particular subset of the cut locus of Q (in P) leads to a non-overlapping unfolding of the polyhedron. This gives a new genera… ▽ More We extend the notion of a source unfolding of a convex polyhedron P to be based on a closed polygonal curve Q in a particular class rather than based on a point. The class requires that Q "lives on a cone" to both sides; it includes simple, closed quasigeodesics. Cutting a particular subset of the cut locus of Q (in P) leads to a non-overlapping unfolding of the polyhedron. This gives a new general method to unfold the surface of any convex polyhedron to a simple, planar polygon. △ Less

Submitted 4 May, 2012; originally announced May 2012.

Comments: A preliminary abstract appeared EuroCG: Proc. 25th European Workshop Comput. Geom., pages 61--64, March 2009. This full version is 19 pages long, with 9 figures

MSC Class: 52B10 ACM Class: F.2.2; G.2

Orientable cut locus structures on graphs

Authors: Jin-ichi Itoh, Costin Vîlcu

Abstract: We showed in another paper [arXiv:1103.1759] that every connected graph can be realized as the cut locus of some point on some riemannian surface $S$. Here, criteria for the orientability of $S$ are given, and are applied to classify the distinct, orientable, cut locus structures on graphs with four generating cycles. We showed in another paper [arXiv:1103.1759] that every connected graph can be realized as the cut locus of some point on some riemannian surface $S$. Here, criteria for the orientability of $S$ are given, and are applied to classify the distinct, orientable, cut locus structures on graphs with four generating cycles. △ Less

Submitted 16 March, 2011; originally announced March 2011.

Comments: 24 pages, 14 pages. Fourth in a series of four papers

MSC Class: 53C22; 05C10

Cut locus structures on graphs

Authors: Jin-ichi Itoh, Costin Vîlcu

Abstract: Motivated by a fundamental geometrical object, the cut locus, we introduce and study a new combinatorial structure on graphs. Motivated by a fundamental geometrical object, the cut locus, we introduce and study a new combinatorial structure on graphs. △ Less

Submitted 9 March, 2011; originally announced March 2011.

Comments: 16 pages, 15 figures. First in a series of four articles

MSC Class: 57R70; 53C20; 05C10

Conical Existence of Closed Curves on Convex Polyhedra

Authors: Joseph O'Rourke, Costin Vilcu

Abstract: Let C be a simple, closed, directed curve on the surface of a convex polyhedron P. We identify several classes of curves C that "live on a cone," in the sense that C and a neighborhood to one side may be isometrically embedded on the surface of a cone Lambda, with the apex a of Lambda enclosed inside (the image of) C; we also prove that each point of C is "visible to" a. In particular, we obtain t… ▽ More Let C be a simple, closed, directed curve on the surface of a convex polyhedron P. We identify several classes of curves C that "live on a cone," in the sense that C and a neighborhood to one side may be isometrically embedded on the surface of a cone Lambda, with the apex a of Lambda enclosed inside (the image of) C; we also prove that each point of C is "visible to" a. In particular, we obtain that these curves have non-self-intersecting developments in the plane. Moreover, the curves we identify that live on cones to both sides support a new type of "source unfolding" of the entire surface of P to one non-overlapping piece, as reported in a companion paper. △ Less

Submitted 14 February, 2011; v1 submitted 3 February, 2011; originally announced February 2011.

Comments: 24 pages, 15 figures, 6 references. Version 2 includes a solution to one of the open problems posed in Version 1, concerning quasigeodesic loops

MSC Class: 52B10 ACM Class: F.2.2

Unfolding Convex Polyhedra via Quasigeodesic Star Unfoldings

Authors: Jin-ichi Itoh, Joseph O'Rourke, Costin Vîlcu

Abstract: We extend the notion of a star unfolding to be based on a simple quasigeodesic loop Q rather than on a point. This gives a new general method to unfold the surface of any convex polyhedron P to a simple, planar polygon: shortest paths from all vertices of P to Q are cut, and all but one segment of Q is cut. We extend the notion of a star unfolding to be based on a simple quasigeodesic loop Q rather than on a point. This gives a new general method to unfold the surface of any convex polyhedron P to a simple, planar polygon: shortest paths from all vertices of P to Q are cut, and all but one segment of Q is cut. △ Less

Submitted 12 December, 2008; originally announced December 2008.

Comments: 18 pages, 10 figures

Report number: Smith 091 ACM Class: F.2.2

Star Unfolding Convex Polyhedra via Quasigeodesic Loops

Authors: Jin-ichi Itoh, Joseph O'Rourke, Costin Vîlcu

Abstract: We extend the notion of star unfolding to be based on a quasigeodesic loop Q rather than on a point. This gives a new general method to unfold the surface of any convex polyhedron P to a simple (non-overlapping), planar polygon: cut along one shortest path from each vertex of P to Q, and cut all but one segment of Q. We extend the notion of star unfolding to be based on a quasigeodesic loop Q rather than on a point. This gives a new general method to unfold the surface of any convex polyhedron P to a simple (non-overlapping), planar polygon: cut along one shortest path from each vertex of P to Q, and cut all but one segment of Q. △ Less

Submitted 24 June, 2009; v1 submitted 28 July, 2007; originally announced July 2007.

Comments: 10 pages, 7 figures. v2 improves the description of cut locus, and adds references. v3 improves two figures and their captions. New version v4 offers a completely different proof of non-overlap in the quasigeodesic loop case, and contains several other substantive improvements. This version is 23 pages long, with 15 figures

Report number: Smith College Computer Science Technical Report 084 ACM Class: F.2.2