-
Adaptive Implicit-Based Deep Learning Channel Estimation for 6G Communications
Authors:
Zhen Qiao,
Jiang Xue,
Junkai Zhang,
Guanzhang Liu,
Xiaoqin Ma,
Runhua Li,
Faheem A. Khan,
John S. Thompson,
Zongben Xu
Abstract:
With the widespread deployment of fifth-generation (5G) wireless networks, research on sixth-generation (6G) technology is gaining momentum. Artificial Intelligence (AI) is anticipated to play a significant role in 6G, particularly through integration with the physical layer for tasks such as channel estimation. Considering resource limitations in real systems, the AI algorithm should be designed…
▽ More
With the widespread deployment of fifth-generation (5G) wireless networks, research on sixth-generation (6G) technology is gaining momentum. Artificial Intelligence (AI) is anticipated to play a significant role in 6G, particularly through integration with the physical layer for tasks such as channel estimation. Considering resource limitations in real systems, the AI algorithm should be designed to have the ability to balance the accuracy and resource consumption according to the scenarios dynamically. However, conventional explicit multilayer-stacked Deep Learning (DL) models struggle to adapt due to their heavy reliance on the structure of deep neural networks. This article proposes an adaptive Implicit-layer DL Channel Estimation Network (ICENet) with a lightweight framework for vehicle-to-everything communications. This novel approach balances computational complexity and channel estimation accuracy by dynamically adjusting computational resources based on input data conditions, such as channel quality. Unlike explicit multilayer-stacked DL-based channel estimation models, ICENet offers a flexible framework, where specific requirements can be achieved by adaptively changing the number of iterations of the iterative layer. Meanwhile, ICENet requires less memory while maintaining high performance. The article concludes by highlighting open research challenges and promising future research directions.
△ Less
Submitted 22 May, 2025;
originally announced May 2025.
-
Beam Entropy of 5G Cellular Millimetre-Wave Channels
Authors:
Krishan Kumar Tiwari,
Eckhard Grass,
John S. Thompson,
Rolf Kraemer
Abstract:
In this paper, we obtain and study typical beam entropy values for millimetre wave (mm-wave) channel models using the NYUSIM simulator for frequencies up to 100 GHz for fifth generation (5G) and beyond 5G cellular communication systems. The beam entropy is used to quantify sparse MIMO channel randomness in beamspace. Lower relative beam entropy channels are suitable for memory-assisted statistical…
▽ More
In this paper, we obtain and study typical beam entropy values for millimetre wave (mm-wave) channel models using the NYUSIM simulator for frequencies up to 100 GHz for fifth generation (5G) and beyond 5G cellular communication systems. The beam entropy is used to quantify sparse MIMO channel randomness in beamspace. Lower relative beam entropy channels are suitable for memory-assisted statistically-ranked (MarS) and hybrid radio frequency (RF) beam training algorithms. High beam entropies can potentially be advantageous for low overhead secured radio communications by generating cryptographic keys based on channel randomness in beamspace, especially for sparse multiple input multiple output (MIMO) channels. Urban micro (UMi), urban macro (UMa) and rural macro (RMa) cellular scenarios have been investigated in this work for 28, 60, 73 and 100 GHz.
△ Less
Submitted 15 July, 2019; v1 submitted 17 June, 2019;
originally announced June 2019.
-
Memory-assisted Statistically-ranked RF Beam Training Algorithm for Sparse MIMO
Authors:
Krishan K. Tiwari,
Eckhard Grass,
John S. Thompson,
Rolf Kraemer
Abstract:
This paper presents a novel radio frequency (RF) beam training algorithm for sparse multiple input multiple output (MIMO) channels using unitary RF beamforming codebooks at transmitter (Tx) and receiver (Rx). The algorithm leverages statistical knowledge from past beam data for expedited beam search with statistically-minimal training overheads. Beams are tested in the order of their ranks based o…
▽ More
This paper presents a novel radio frequency (RF) beam training algorithm for sparse multiple input multiple output (MIMO) channels using unitary RF beamforming codebooks at transmitter (Tx) and receiver (Rx). The algorithm leverages statistical knowledge from past beam data for expedited beam search with statistically-minimal training overheads. Beams are tested in the order of their ranks based on their probabilities for providing a communication link. For low beam entropy scenarios, statistically-ranked beam search performs excellent in reducing the average number of beam tests per Tx-Rx beam pair identification for a communication link. For high beam entropy cases, a hybrid algorithm involving both memory-assisted statistically-ranked (MarS) beam search and multi-level (ML) beam search is also proposed. Savings in training overheads increase with decrease in beam entropy and increase in MIMO channel dimensions.
△ Less
Submitted 18 June, 2019; v1 submitted 4 June, 2019;
originally announced June 2019.
-
DELMU: A Deep Learning Approach to Maximising the Utility of Virtualised Millimetre-Wave Backhauls
Authors:
Rui Li,
Chaoyun Zhang,
Paul Patras,
Pan Cao,
John S. Thompson
Abstract:
Advances in network programmability enable operators to 'slice' the physical infrastructure into independent logical networks. By this approach, each network slice aims to accommodate the demands of increasingly diverse services. However, precise allocation of resources to slices across future 5G millimetre-wave backhaul networks, to optimise the total network utility, is challenging. This is beca…
▽ More
Advances in network programmability enable operators to 'slice' the physical infrastructure into independent logical networks. By this approach, each network slice aims to accommodate the demands of increasingly diverse services. However, precise allocation of resources to slices across future 5G millimetre-wave backhaul networks, to optimise the total network utility, is challenging. This is because the performance of different services often depends on conflicting requirements, including bandwidth, sensitivity to delay, or the monetary value of the traffic incurred. In this paper, we put forward a general rate utility framework for slicing mm-wave backhaul links, encompassing all known types of service utilities, i.e. logarithmic, sigmoid, polynomial, and linear. We then introduce DELMU, a deep learning solution that tackles the complexity of optimising non-convex objective functions built upon arbitrary combinations of such utilities. Specifically, by employing a stack of convolutional blocks, DELMU can learn correlations between traffic demands and achievable optimal rate assignments. We further regulate the inferences made by the neural network through a simple 'sanity check' routine, which guarantees both flow rate admissibility within the network's capacity region and minimum service levels. The proposed method can be trained within minutes, following which it computes rate allocations that match those obtained with state-of-the-art global optimisation algorithms, yet orders of magnitude faster. This confirms the applicability of DELMU to highly dynamic traffic regimes and we demonstrate up to 62% network utility gains over a baseline greedy approach.
△ Less
Submitted 2 October, 2018; v1 submitted 30 September, 2018;
originally announced October 2018.
-
Semi-dynamic Green Resource Management in Downlink Heterogeneous Networks by Group Sparse Power Control
Authors:
Pan Cao,
Wenjia Liu,
John S. Thompson,
Chenyang Yang,
Eduard A. Jorswieck
Abstract:
This paper addresses the energy-saving problem for the downlink of heterogeneous networks, which aims at minimizing the total base stations (BSs) power consumption while each user's rate requirement is supported. The basic idea of this work is to make use of the flexibility and scalability of the system such that more benefits can be gained by efficient resource management. This motivates us to pr…
▽ More
This paper addresses the energy-saving problem for the downlink of heterogeneous networks, which aims at minimizing the total base stations (BSs) power consumption while each user's rate requirement is supported. The basic idea of this work is to make use of the flexibility and scalability of the system such that more benefits can be gained by efficient resource management. This motivates us to propose a flexible BS power consumption model, which can control system resources, such as antennas, frequency carriers and transmit power allocation in an energy efficient manner rather than the "on/off" binary sleep mode for BSs. To denote these power-saving modes, we employ the group sparsity of the transmit power vector instead of the {0, 1} variables. Based on this power model, a semi-dynamic green resource management mechanism is proposed, which can jointly solve a series of resource management problems, including BS association, frequency carriers (FCs) assignment, and the transmit power allocation, by group sparse power control based on the large scale fading values. In particular, the successive convex approximation (SCA)-based algorithm is applied to solve a stationary solution to the original non-convex problem. Simulation results also verify the proposed BS power model and the green resource management mechanism.
△ Less
Submitted 19 November, 2015;
originally announced November 2015.
-
Base Station Sleeping and Resource Allocation in Renewable Energy Powered Cellular Networks
Authors:
Jie Gong,
John S. Thompson,
Sheng Zhou,
Zhisheng Niu
Abstract:
We consider energy-efficient wireless resource management in cellular networks where BSs are equipped with energy harvesting devices, using statistical information for traffic intensity and harvested energy. The problem is formulated as adapting BSs' on-off states, active resource blocks (e.g. subcarriers) as well as power allocation to minimize the average grid power consumption in a given time p…
▽ More
We consider energy-efficient wireless resource management in cellular networks where BSs are equipped with energy harvesting devices, using statistical information for traffic intensity and harvested energy. The problem is formulated as adapting BSs' on-off states, active resource blocks (e.g. subcarriers) as well as power allocation to minimize the average grid power consumption in a given time period while satisfying the users' quality of service (blocking probability) requirements. It is transformed into an unconstrained optimization problem to minimize a weighted sum of grid power consumption and blocking probability. A two-stage dynamic programming (DP) algorithm is then proposed to solve this optimization problem, by which the BSs' on-off states are optimized in the first stage, and the active BS's resource blocks are allocated iteratively in the second stage. Compared with the optimal joint BSs' on-off states and active resource blocks allocation algorithm, the proposed algorithm greatly reduces the computational complexity, while at the same time achieves close to the optimal energy saving performance.
△ Less
Submitted 21 May, 2013;
originally announced May 2013.
-
Practical Analysis of Codebook Design and Frequency Offset Estimation for Virtual-MIMO Systems
Authors:
Jing Jiang,
John S. Thompson,
Hongjian Sun,
Peter M. Grant
Abstract:
A virtual multiple-input multiple-output (MIMO) wireless system using the receiver-side cooperation with the compress-and-forward (CF) protocol, is an alternative to a point-to-point MIMO system, when a single receiver is not equipped with multiple antennas. It is evident that the practicality of CF cooperation will be greatly enhanced if an efficient source coding technique can be used at the rel…
▽ More
A virtual multiple-input multiple-output (MIMO) wireless system using the receiver-side cooperation with the compress-and-forward (CF) protocol, is an alternative to a point-to-point MIMO system, when a single receiver is not equipped with multiple antennas. It is evident that the practicality of CF cooperation will be greatly enhanced if an efficient source coding technique can be used at the relay. It is even more desirable that CF cooperation should not be unduly sensitive to carrier frequency offsets (CFOs). This paper presents a practical study of these two issues. Firstly, codebook designs of the Voronoi vector quantization (VQ) and the tree-structure vector quantization (TSVQ) to enable CF cooperation at the relay are described. A comparison in terms of the codebook design and encoding complexity is analyzed. It is shown that the TSVQ is much simpler to design and operate, and can achieve a favorable performance-complexity tradeoff. Furthermore, this paper demonstrates that CFO can lead to significant performance degradation for the virtual MIMO system. To overcome this, it is proposed to maintain clock synchronization and jointly estimate the CFO between the relay and the destination. This approach is shown to provide a significant performance improvement.
△ Less
Submitted 7 February, 2013;
originally announced February 2013.
-
Relaying Technologies for Smart Grid Communications
Authors:
Hongjian Sun,
Bo Tan,
Jing Jiang,
John S. Thompson,
Arumugam Nallanathan,
H. Vincent Poor
Abstract:
Wireless technologies can support a broad range of smart grid applications including advanced metering infrastructure (AMI) and demand response (DR). However, there are many formidable challenges when wireless technologies are applied to the smart gird, e.g., the tradeoffs between wireless coverage and capacity, the high reliability requirement for communication, and limited spectral resources. Re…
▽ More
Wireless technologies can support a broad range of smart grid applications including advanced metering infrastructure (AMI) and demand response (DR). However, there are many formidable challenges when wireless technologies are applied to the smart gird, e.g., the tradeoffs between wireless coverage and capacity, the high reliability requirement for communication, and limited spectral resources. Relaying has emerged as one of the most promising candidate solutions for addressing these issues. In this article, an introduction to various relaying strategies is presented, together with a discussion of how to improve spectral efficiency and coverage in relay-based information and communications technology (ICT) infrastructure for smart grid applications. Special attention is paid to the use of unidirectional relaying, collaborative beamforming, and bidirectional relaying strategies.
△ Less
Submitted 7 February, 2013;
originally announced February 2013.
-
Compressive and Noncompressive Power Spectral Density Estimation from Periodic Nonuniform Samples
Authors:
Michael A. Lexa,
Mike E. Davies,
John S. Thompson
Abstract:
This paper presents a novel power spectral density estimation technique for band-limited, wide-sense stationary signals from sub-Nyquist sampled data. The technique employs multi-coset sampling and incorporates the advantages of compressed sensing (CS) when the power spectrum is sparse, but applies to sparse and nonsparse power spectra alike. The estimates are consistent piecewise constant approxi…
▽ More
This paper presents a novel power spectral density estimation technique for band-limited, wide-sense stationary signals from sub-Nyquist sampled data. The technique employs multi-coset sampling and incorporates the advantages of compressed sensing (CS) when the power spectrum is sparse, but applies to sparse and nonsparse power spectra alike. The estimates are consistent piecewise constant approximations whose resolutions (width of the piecewise constant segments) are controlled by the periodicity of the multi-coset sampling. We show that compressive estimates exhibit better tradeoffs among the estimator's resolution, system complexity, and average sampling rate compared to their noncompressive counterparts. For suitable sampling patterns, noncompressive estimates are obtained as least squares solutions. Because of the non-negativity of power spectra, compressive estimates can be computed by seeking non-negative least squares solutions (provided appropriate sampling patterns exist) instead of using standard CS recovery algorithms. This flexibility suggests a reduction in computational overhead for systems estimating both sparse and nonsparse power spectra because one algorithm can be used to compute both compressive and noncompressive estimates.
△ Less
Submitted 17 May, 2012; v1 submitted 12 October, 2011;
originally announced October 2011.
-
Reconciling Compressive Sampling Systems for Spectrally-sparse Continuous-time Signals
Authors:
Michael A. Lexa,
Mike E. Davies,
John S. Thompson
Abstract:
The Random Demodulator (RD) and the Modulated Wideband Converter (MWC) are two recently proposed compressed sensing (CS) techniques for the acquisition of continuous-time spectrally-sparse signals. They extend the standard CS paradigm from sampling discrete, finite dimensional signals to sampling continuous and possibly infinite dimensional ones, and thus establish the ability to capture these sig…
▽ More
The Random Demodulator (RD) and the Modulated Wideband Converter (MWC) are two recently proposed compressed sensing (CS) techniques for the acquisition of continuous-time spectrally-sparse signals. They extend the standard CS paradigm from sampling discrete, finite dimensional signals to sampling continuous and possibly infinite dimensional ones, and thus establish the ability to capture these signals at sub-Nyquist sampling rates. The RD and the MWC have remarkably similar structures (similar block diagrams), but their reconstruction algorithms and signal models strongly differ. To date, few results exist that compare these systems, and owing to the potential impacts they could have on spectral estimation in applications like electromagnetic scanning and cognitive radio, we more fully investigate their relationship in this paper. We show that the RD and the MWC are both based on the general concept of random filtering, but employ significantly different sampling functions. We also investigate system sensitivities (or robustness) to sparse signal model assumptions. Lastly, we show that "block convolution" is a fundamental aspect of the MWC, allowing it to successfully sample and reconstruct block-sparse (multiband) signals. Based on this concept, we propose a new acquisition system for continuous-time signals whose amplitudes are block sparse. The paper includes detailed time and frequency domain analyses of the RD and the MWC that differ, sometimes substantially, from published results.
△ Less
Submitted 10 October, 2011; v1 submitted 21 January, 2011;
originally announced January 2011.
-
Cooperative Multiplexing: Toward Higher Spectral Efficiency in Multi-antenna Relay Networks
Authors:
Yijia,
Fan,
Chao Wang,
H. Vincent Poor,
John S. Thompson
Abstract:
Previous work on cooperative communications has concentrated primarily on the diversity benefits of such techniques. This paper, instead, considers the multiplexing benefits of cooperative communications. First, a new interpretation on the fundamental tradeoff between the transmission rate and outage probability in multi-antenna relay networks is given. It follows that multiplexing gains can be…
▽ More
Previous work on cooperative communications has concentrated primarily on the diversity benefits of such techniques. This paper, instead, considers the multiplexing benefits of cooperative communications. First, a new interpretation on the fundamental tradeoff between the transmission rate and outage probability in multi-antenna relay networks is given. It follows that multiplexing gains can be obtained at any finite SNR, in full-duplex multi-antenna relay networks. Thus relaying can offer not only stronger link reliability, but also higher spectral efficiency.
Specifically, the decode-and-forward protocol is applied and networks that have one source, one destination, and multiple relays are considered. A receive power gain at the relays, which captures the network large scale fading characteristics, is also considered. It is shown that this power gain can significantly affect the system diversity-multiplexing tradeoff for any finite SNR value. Several relaying protocols are proposed and are shown to offer nearly the same outage probability as if the transmit antennas at the source and the relay(s) were co-located, given certain SNR and receive power gains at the relays. Thus a higher multiplexing gain than that of the direct link can be obtained if the destination has more antennas than the source.
Much of the analysis in the paper is valid for arbitrary channel fading statistics. These results point to a view of relay networks as a means for providing higher spectral efficiency, rather than only link reliability.
△ Less
Submitted 13 March, 2009;
originally announced March 2009.
-
Superposition-Coded Concurrent Decode-and-Forward Relaying
Authors:
Chao Wang,
Yijia Fan,
Ioannis Krikidis,
John S. Thompson,
H. Vincent Poor
Abstract:
In this paper, a superposition-coded concurrent decode-and-forward (DF) relaying protocol is presented. A specific scenario, where the inter-relay channel is sufficiently strong, is considered. Assuming perfect source-relay transmissions, the proposed scheme further improves the diversity performance of previously proposed repetition-coded concurrent DF relaying, in which the advantage of the in…
▽ More
In this paper, a superposition-coded concurrent decode-and-forward (DF) relaying protocol is presented. A specific scenario, where the inter-relay channel is sufficiently strong, is considered. Assuming perfect source-relay transmissions, the proposed scheme further improves the diversity performance of previously proposed repetition-coded concurrent DF relaying, in which the advantage of the inter-relay interference is not fully extracted.
△ Less
Submitted 29 April, 2008;
originally announced April 2008.
-
A Simple Distributed Antenna Processing Scheme for Cooperative Diversity
Authors:
Yijia Fan,
Abdulkareem Adinoyi,
John S Thompson,
Halim Yanikomeroglu,
H. Vincent Poor
Abstract:
In this letter the performance of multiple relay channels is analyzed for the situation in which multiple antennas are deployed only at the relays. The simple repetition-coded decodeand- forward protocol with two different antenna processing techniques at the relays is investigated. The antenna combining techniques are maximum ratio combining (MRC) for reception and transmit beamforming (TB) for…
▽ More
In this letter the performance of multiple relay channels is analyzed for the situation in which multiple antennas are deployed only at the relays. The simple repetition-coded decodeand- forward protocol with two different antenna processing techniques at the relays is investigated. The antenna combining techniques are maximum ratio combining (MRC) for reception and transmit beamforming (TB) for transmission. It is shown that these distributed antenna combining techniques can exploit the full spatial diversity of the relay channels regardless of the number of relays and antennas at each relay, and offer significant power gain over distributed space-time coding techniques.
△ Less
Submitted 19 February, 2008;
originally announced February 2008.
-
Cooperative Multiplexing in a Half Duplex Relay Network: Performance and Constraints
Authors:
Yijia,
Fan,
H. Vincent Poor,
John S. Thompson
Abstract:
Previous work on relay networks has concentrated primarily on the diversity benefits of such techniques. This paper explores the possibility of also obtaining multiplexing gain in a relay network, while retaining diversity gain. Specifically, consider a network in which a single source node is equipped with one antenna and a destination is equipped with two antennas. It is shown that, in certain…
▽ More
Previous work on relay networks has concentrated primarily on the diversity benefits of such techniques. This paper explores the possibility of also obtaining multiplexing gain in a relay network, while retaining diversity gain. Specifically, consider a network in which a single source node is equipped with one antenna and a destination is equipped with two antennas. It is shown that, in certain scenarios, by adding a relay with two antennas and using a successive relaying protocol, the diversity multiplexing tradeoff performance of the network can be lower bounded by that of a 2 by 2 MIMO channel, when the decode-and-forward protocol is applied at the relay. A distributed D-BLAST architecture is developed, in which parallel channel coding is applied to achieve this tradeoff. A space-time coding strategy, which can bring a maximal multiplexing gain of more than one, is also derived for this scenario. As will be shown, while this space-time coding strategy exploits maximal diversity for a small multiplexing gain, the proposed successive relaying scheme offers a significant performance advantage for higher data rate transmission. In addition to the specific results shown here, these ideas open a new direction for exploiting the benefits of wireless relay networks.
△ Less
Submitted 28 September, 2007; v1 submitted 24 September, 2007;
originally announced September 2007.