-
A Slicing Model for Transport Networks with Traffic Burst Control and QoS Compliance for Traffic Flows
Authors:
Aitor Encinas-Alonso,
Carlos M. Lentisco,
Ignacio Soto,
Luis Bellido,
David Fernandez
Abstract:
Network slicing has emerged as a key network technology, providing network operators with the means to offer virtual networks to vertical users over a single physical network infrastructure. Recent research has resulted mainly in techniques for managing and deploying network slices, but the implementation of network slices on a real physical transport network infrastructure has received much less…
▽ More
Network slicing has emerged as a key network technology, providing network operators with the means to offer virtual networks to vertical users over a single physical network infrastructure. Recent research has resulted mainly in techniques for managing and deploying network slices, but the implementation of network slices on a real physical transport network infrastructure has received much less attention. Standardization bodies, such as the Internet Engineering Task Force (IETF), have provided some implementation recommendations. Still, there is a lack of mechanisms to implement network slices capable of handling traffic bursts while simultaneously meeting the Quality of Service (QoS) requirements of the traffic flows associated with the slices. In this paper, we propose a novel fine-grained resource control mechanism to implement transport network slices that meet traffic QoS requirements while both accepting limited traffic bursts, and enabling efficient bandwidth sharing within and across slices. The mechanism is executed at the edge of the transport network. The proposed model aligns with current standards on network slicing and has been tested on an experimental platform. Using this platform, we have conducted an extensive experimental campaign that demonstrates that our proposal can effectively control traffic bursts generated within the network slices while maximizing bandwidth utilization across the network.
△ Less
Submitted 3 April, 2025; v1 submitted 6 February, 2025;
originally announced February 2025.
-
Water quality polluted by total suspended solids classified within an Artificial Neural Network approach
Authors:
I. Luviano Soto,
Y. Concha Sánchez,
A. Raya
Abstract:
This study investigates the application of an artificial neural network framework for analysing water pollution caused by solids. Water pollution by suspended solids poses significant environmental and health risks. Traditional methods for assessing and predicting pollution levels are often time-consuming and resource-intensive. To address these challenges, we developed a model that leverages a co…
▽ More
This study investigates the application of an artificial neural network framework for analysing water pollution caused by solids. Water pollution by suspended solids poses significant environmental and health risks. Traditional methods for assessing and predicting pollution levels are often time-consuming and resource-intensive. To address these challenges, we developed a model that leverages a comprehensive dataset of water quality from total suspended solids. A convolutional neural network was trained under a transfer learning approach using data corresponding to different total suspended solids concentrations, with the goal of accurately predicting low, medium and high pollution levels based on various input variables. Our model demonstrated high predictive accuracy, outperforming conventional statistical methods in terms of both speed and reliability. The results suggest that the artificial neural network framework can serve as an effective tool for real-time monitoring and management of water pollution, facilitating proactive decision-making and policy formulation. This approach not only enhances our understanding of pollution dynamics but also underscores the potential of machine learning techniques in environmental science.
△ Less
Submitted 18 October, 2024;
originally announced October 2024.
-
A survey on road safety and traffic efficiency vehicular applications based on C-V2X technologies
Authors:
Ignacio Soto,
Maria Calderon,
Oscar Amador,
Manuel Urueña
Abstract:
In recent years, the use of cellular network technologies to provide communication-based applications to vehicles has received considerable attention. 3GPP, the standardization body responsible for cellular networks specifications, is developing technologies to meet the requirements of vehicular communication applications, and the research community is testing and validating the ability of those t…
▽ More
In recent years, the use of cellular network technologies to provide communication-based applications to vehicles has received considerable attention. 3GPP, the standardization body responsible for cellular networks specifications, is developing technologies to meet the requirements of vehicular communication applications, and the research community is testing and validating the ability of those technologies to implement different applications. This survey presents the body of work dealing with the use of cellular technologies to implement communication-based applications for the connected vehicle. We focus on basic and advanced road safety and traffic efficiency applications, which are critically important for the future of vehicular networks. We start by describing the different cellular-related technologies that have a role to play in providing services to the connected vehicle, propose a classification of types of communication used in vehicular applications, and then apply this classification to organize and present recent research work on the topic. Finally, we identify the main challenges in the use of cellular technologies to develop applications for the connected vehicle.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
Evaluation of Greedy and CBF for ETSI non-area GeoNetworking: The impact of DCC
Authors:
Oscar Amador,
Maria Calderon,
Manuel Urueña,
Ignacio Soto
Abstract:
This paper evaluates the performance of the two ETSI non-area forwarding algorithms in the GeoNetworking specification: Greedy Forwarding and Non-Area Contention-Based Forwarding (CBF). Non-area forwarding occurs when a packet is sent to a geographical Destination Area from a node located outside of this area, e.g., when a vehicle wants to alert of hazardous events to other vehicles located in a d…
▽ More
This paper evaluates the performance of the two ETSI non-area forwarding algorithms in the GeoNetworking specification: Greedy Forwarding and Non-Area Contention-Based Forwarding (CBF). Non-area forwarding occurs when a packet is sent to a geographical Destination Area from a node located outside of this area, e.g., when a vehicle wants to alert of hazardous events to other vehicles located in a distant geographical area. The evaluation has been carried out both in urban and highway scenarios and takes into account the complete ETSI Architecture, including the interaction with the Decentralized Congestion Control (DCC) mechanism. We have also compared ETSI-defined mechanisms with optimizations found in the literature. Our main findings are that Greedy Forwarding, when combined with DCC, is extremely ineffective even with optimizations, and Non-Area CBFs (both ETSI CBF and an optimized version called S-FoT+) outperform Greedy Forwarding both in highway and urban scenarios.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Studying and improving the performance of ETSI ITS contention-based forwarding (CBF) in urban and highway scenarios: S-FoT+
Authors:
Oscar Amador,
Ignacio Soto,
Maria Calderon,
Manuel Urueña
Abstract:
This paper evaluates the performance of ETSI ITS Contention-Based Forwarding (CBF) and ETSI Simple GeoBroadcast forwarding while disseminating warning messages over a Geographical Area in highway and urban scenarios. Our experimental evaluation considers the complete ETSI ITS architecture including the Decentralized Congestion Control (DCC) mechanism. We propose an enhanced CBF mechanism, named S-…
▽ More
This paper evaluates the performance of ETSI ITS Contention-Based Forwarding (CBF) and ETSI Simple GeoBroadcast forwarding while disseminating warning messages over a Geographical Area in highway and urban scenarios. Our experimental evaluation considers the complete ETSI ITS architecture including the Decentralized Congestion Control (DCC) mechanism. We propose an enhanced CBF mechanism, named S-FOT+, which combines several improvements to the ETSI CBF algorithm. S-FoT+ has a similar or better performance than the ETSI forwarding algorithms regarding both reliability and end-to-end delay while requiring much fewer transmissions. The improvements are equally effective and efficient in both urban and highway scenarios with large Destination Areas. Finally, we evaluate the trade-offs that stem from using multi-hop broadcast mechanisms in urban settings with smaller Destination Areas when compared to single-hop broadcast. Results show that multi-hop mechanisms significantly improve coverage at the cost of an increased number of transmissions.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Evaluation and improvement of ETSI ITS Contention-Based Forwarding (CBF) of warning messages in highway scenarios
Authors:
Oscar Amador,
Manuel Urueña,
Maria Calderon,
Ignacio Soto
Abstract:
This paper evaluates the performance of the ETSI Contention-Based Forwarding (CBF) GeoNetworking protocol for distributing warning messages in highway scenarios, including its interaction with the Decentralized Congestion Control (DCC) mechanism. Several shortcomings of the standard ETSI CBF algorithm are identified, and we propose different solutions to these problems, which are able to reduce th…
▽ More
This paper evaluates the performance of the ETSI Contention-Based Forwarding (CBF) GeoNetworking protocol for distributing warning messages in highway scenarios, including its interaction with the Decentralized Congestion Control (DCC) mechanism. Several shortcomings of the standard ETSI CBF algorithm are identified, and we propose different solutions to these problems, which are able to reduce the number of transmissions by an order of magnitude, while reducing the message end-to-end delay and providing a reliability close to 100% in a large area of interest.
△ Less
Submitted 9 March, 2024;
originally announced March 2024.
-
Experimental Evaluation of the ETSI DCC Adaptive Approach and Related Algorithms
Authors:
Oscar Amador,
Ignacio Soto,
Maria Calderon,
Manuel Urueña
Abstract:
Decentralized Congestion Control (DCC) mechanisms have been a core part of protocol stacks for vehicular networks since their inception and standardization. The ETSI ITS-G5 protocol stack for vehicular communications considers the usage of DCC not only in the network or access layers, but also as a part of the cross-layer architecture that influences how often messages are generated and transmitte…
▽ More
Decentralized Congestion Control (DCC) mechanisms have been a core part of protocol stacks for vehicular networks since their inception and standardization. The ETSI ITS-G5 protocol stack for vehicular communications considers the usage of DCC not only in the network or access layers, but also as a part of the cross-layer architecture that influences how often messages are generated and transmitted. ETSI DCC mechanisms have evolved from a reactive approach based on a finite state machine, to an adaptive approach that relies on a linear control algorithm. This linear control algorithm, called LIMERIC, is the basis of the mechanism used in the ETSI DCC Adaptive Approach. The behavior of this algorithm depends on a set of parameters. Different values for these parameters have been proposed in the literature, including those defined in the ETSI specification. A recent proposal is Dual-$α$, which chooses parameters to improve convergence and fairness when the algorithm has to react to fast changes in the use of the shared medium (transitory situations). This article evaluates, by means of simulations, the performance of the ETSI DCC Adaptive Approach and related algorithms, considering both steady state and transitory situations. Results show that a bad selection of parameters can make a DCC algorithm ineffective, that the ETSI DCC Adaptive algorithm performs well in steady state conditions, and that Dual-$α$ performs as well in steady state conditions and outperforms the ETSI DCC Adaptive Approach in transitory scenarios.
△ Less
Submitted 2 March, 2024;
originally announced March 2024.
-
Reducing Unnecessary Alerts in Pedestrian Protection Systems Based on P2V Communications
Authors:
Ignacio Soto,
Felipe Jimenez,
Maria Calderon,
Jose E. Naranjo,
Jose J. Anaya
Abstract:
There are different proposals in the literature on how to protect pedestrians using warning systems to alert drivers of their presence. They can be based on onboard perception systems or wireless communications. The evaluation of these systems has been focused on testing their ability to detect pedestrians. A problem that has received much less attention is the possibility of generating too many a…
▽ More
There are different proposals in the literature on how to protect pedestrians using warning systems to alert drivers of their presence. They can be based on onboard perception systems or wireless communications. The evaluation of these systems has been focused on testing their ability to detect pedestrians. A problem that has received much less attention is the possibility of generating too many alerts in the warning systems. In this paper, we propose and analyze four different algorithms to take the decision on generating alerts in a warning system that is based on direct wireless communications between vehicles and pedestrians. With the algorithms, we explore different strategies to reduce unnecessary alerts. The feasibility of the implementation of the algorithms was evaluated with a deployment using real equipment, and tests were carried out to verify their behavior in real scenarios. The ability of each algorithm to reduce unnecessary alerts was evaluated with realistic simulations in an urban scenario, using a traffic simulator with vehicular and pedestrian flows. The results show the importance of tackling the problem of driver overload in warning systems, and that it is not straightforward to predict the load of alerts generated by an algorithm in a large-scale deployment, in which there are multiple interactions between vehicles and pedestrians.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
GoT: Decreasing DCC Queuing for CAM Messages
Authors:
Oscar Amador,
Ignacio Soto,
Manuel Urueña,
Maria Calderon
Abstract:
Vehicular networks use Decentralized Congestion Control (DCC) mechanisms to operate effectively, but this mechanism may introduce queuing delays. Freshness of Cooperative Awareness Messages (CAMs) is critical for their usefulness. In this letter we explore how the presence of other types of traffic additional to CAMs, even with lower priorities, has an impact on the freshness of CAM messages due t…
▽ More
Vehicular networks use Decentralized Congestion Control (DCC) mechanisms to operate effectively, but this mechanism may introduce queuing delays. Freshness of Cooperative Awareness Messages (CAMs) is critical for their usefulness. In this letter we explore how the presence of other types of traffic additional to CAMs, even with lower priorities, has an impact on the freshness of CAM messages due to DCC queuing. Finally, we propose Generate-on-Time (GoT), which is a simple mechanism that reduces DCC queuing delays for CAM messages without introducing any downside in other performance metrics.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Strengths and Weaknesses of the ETSI Adaptive DCC Algorithm: A Proposal for Improvement
Authors:
Ignacio Soto,
Oscar Amador,
Manuel Urueña,
Maria Calderon
Abstract:
This letter studies the adaptive Decentralized Congestion Control (DCC) algorithm defined in the ETSI TS 102 687 V1.2.1 specification. We provide insights on the parameters used in the algorithm and explore the impact of those parameters on its performance. We show how the algorithm achieves good average medium utilization while protecting against congestion, but we also show how the chosen parame…
▽ More
This letter studies the adaptive Decentralized Congestion Control (DCC) algorithm defined in the ETSI TS 102 687 V1.2.1 specification. We provide insights on the parameters used in the algorithm and explore the impact of those parameters on its performance. We show how the algorithm achieves good average medium utilization while protecting against congestion, but we also show how the chosen parameters can result in slow speed of convergence and long periods of unfairness in transitory situations. Finally, we propose a modification to the algorithm which results in significant improvements in speed of convergence and fairness.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
TOVAC: Tele-operated Vehicle Admission Control and Routing
Authors:
Jorge Martín-Pérez,
Carlos M. Lentisco,
Luis Bellido,
Ignacio Soto,
David Fernández
Abstract:
Tele-operated Driving (ToD) is a challenging use case for mobile network operators. Video captured by the built-in vehicle cameras must be streamed meeting a latency requirement of 5 ms with a 99.999% reliability. Although 5G offers high bandwidth, ultra-low latencies and high reliability; ToD service requirements are violated due to bad channel conditions. Ignoring the channel state may lead to o…
▽ More
Tele-operated Driving (ToD) is a challenging use case for mobile network operators. Video captured by the built-in vehicle cameras must be streamed meeting a latency requirement of 5 ms with a 99.999% reliability. Although 5G offers high bandwidth, ultra-low latencies and high reliability; ToD service requirements are violated due to bad channel conditions. Ignoring the channel state may lead to over-estimate the number of ToD vehicles that can meet the service requirements, hence comprising the vehicle security. To fill this gap, in this letter we propose TOVAC, an algorithm that guarantees ToD service requirements by taking adequate admission control and routing decisions. This is achieved by using a channel-based capacity graph that determines the maximum number of vehicles that can be tele-operated in any road section. We evaluate TOVAC considering cellular deployments from Turin and show that, unlike a state of the art solution, TOVAC guarantees the ToD service requirements.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
The Smart Highway to Babel: the coexistence of different generations of Intelligent Transport Systems
Authors:
Oscar Amador,
Ignacio Soto,
Maria Calderon,
Manuel Urueña
Abstract:
The gap between technology readiness level in Cooperative Intelligent Transport Systems (C-ITS) and its adoption and deployment has caused a phenomenon where at least two types of network access technologies have to coexist. Furthermore, for the case of ETSI Intelligent Transport Systems protocols, work is being completed in Release 2 of the specification while Release 1 deployments are still unde…
▽ More
The gap between technology readiness level in Cooperative Intelligent Transport Systems (C-ITS) and its adoption and deployment has caused a phenomenon where at least two types of network access technologies have to coexist. Furthermore, for the case of ETSI Intelligent Transport Systems protocols, work is being completed in Release 2 of the specification while Release 1 deployments are still underway. This, coupled with industry and consumer trends in the vehicle industry, is bound to cause a scenario where fully C-ITS-enabled vehicles have to coexist with non-C-ITS road users and, at the very least, with different versions of C-ITS. In this paper, we analyze the performance in terms of efficiency and safety of two releases of the ETSI GeoNetworking protocol, as well as a discussion on possible paths to tackle the upcoming compatibility and coexistence problems.
△ Less
Submitted 1 February, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
