Showing 1–3 of 3 results for author: Shyu, R F
-
Micro-electroforming metallic bipolar electrodes for mini-DMFC stacks
Authors:
R. F. Shyu,
H. Yang,
J. -H. Lee
Abstract:
This paper describes the development of metallic bipolar plate fabrication using micro-electroforming process for mini-DMFC (direct methanol fuel cell) stacks. Ultraviolet (UV) lithography was used to define micro-fluidic channels using a photomask and exposure process. Micro-fluidic channels mold with 300 micrometers thick and 500 micrometers wide were firstly fabricated in a negative photoresi…
▽ More
This paper describes the development of metallic bipolar plate fabrication using micro-electroforming process for mini-DMFC (direct methanol fuel cell) stacks. Ultraviolet (UV) lithography was used to define micro-fluidic channels using a photomask and exposure process. Micro-fluidic channels mold with 300 micrometers thick and 500 micrometers wide were firstly fabricated in a negative photoresist onto a stainless steel plate. Copper micro-electroforming was used to replicate the micro-fluidic channels mold. Following by sputtering silver (Ag) with 1.2 micrometers thick, the metallic bipolar plates were completed. The silver layer is used for corrosive resistance. The completed mini-DMFC stack is a 2x2 cm2 fuel cell stack including a 1.5x1.5 cm2 MEA (membrane electrode assembly). Several MEAs were assembly into mini-DMFC stacks using the completed metallic bipolar plates. All test results showed the metallic bipolar plates suitable for mini-DMFC stacks. The maximum output power density is 9.3mW/cm2 and current density is 100 mA/cm2 when using 8 vol. % methanol as fuel and operated at temperature 30 degrees C. The output power result is similar to other reports by using conventional graphite bipolar plates. However, conventional graphite bipolar plates have certain difficulty to be machined to such micro-fluidic channels. The proposed micro-electroforming metallic bipolar plates are feasible to miniaturize DMFC stacks for further portable 3C applications.
△ Less
Submitted 7 May, 2008;
originally announced May 2008.
-
Manufacturing of A micro probe using supersonic aided electrolysis process
Authors:
R. F. Shyu,
Litsai Weng,
Chi-Ting Ho
Abstract:
In this paper, a practical micromachining technology was applied for the fabrication of a micro probe using a complex nontraditional machining process. A series process was combined to machine tungsten carbide rods from original dimension. The original dimension of tungsten carbide rods was 3mm ; the rods were ground to a fixed-dimension of 50 micrometers using precision grinding machine in firs…
▽ More
In this paper, a practical micromachining technology was applied for the fabrication of a micro probe using a complex nontraditional machining process. A series process was combined to machine tungsten carbide rods from original dimension. The original dimension of tungsten carbide rods was 3mm ; the rods were ground to a fixed-dimension of 50 micrometers using precision grinding machine in first step. And then, the rod could be machined to a middle-dimension of 20 micrometers by electrolysis. A final desired micro dimension can be achieved using supersonic aided electrolysis. High-aspect-ratio of micro tungsten carbide rod was easily obtained by this process. Surface roughness of the sample with supersonic aided agitation was compared with that with no agitation in electrolysis. The machined surface of the sample is very smooth due to ionized particles of anode could be removed by supersonic aided agitation during electrolysis. Deep micro holes can also be achieved by the machined high-aspect-rati tungsten carbide rod using EDM process. A micro probe of a ball shape at the end was processed by proposed supersonic aided electrolysis machining process.
△ Less
Submitted 7 May, 2008;
originally announced May 2008.
-
New Horizontal Frustum Optical Waveguide Fabrication Using UV Proximity Printing
Authors:
T. -H. Lin,
H. Yang,
Ruey Fang Shyu,
C. -K. Chao
Abstract:
This paper presents a novel method to fabricate the horizontal frustum structure as a planar optical waveguide by using the proximity printing technique. A horizontal frustum optical waveguide with a both lateral and vertical taper structure was produced. The orthogonal and inclined masks with the diffraction effect were employed in lithography process. This method can precisely control each hor…
▽ More
This paper presents a novel method to fabricate the horizontal frustum structure as a planar optical waveguide by using the proximity printing technique. A horizontal frustum optical waveguide with a both lateral and vertical taper structure was produced. The orthogonal and inclined masks with the diffraction effect were employed in lithography process. This method can precisely control each horizontal frustum optical waveguide geometric profile in the fabrication process. The horizontal frustum optical waveguide and its array with the same inclined angle were generated. The beam propagation simulation software (BPM_CAD) was used to modeling the optical performance. The simulation results reveal that the mode profile matched into horizontal frustum optical waveguide and fiber from the laser diode. The optical loss of horizontal hemi-frustum structure of optical waveguides was less than 0.2dB. The horizontal hemifrustum waveguide will be used for fiber coupling on boards for further optical communication systems.
△ Less
Submitted 21 February, 2008;
originally announced February 2008.
