Showing 1–13 of 13 results for author: Sharifzadeh, M

Denoising Plane Wave Ultrasound Images Using Diffusion Probabilistic Models

Authors: Hojat Asgariandehkordi, Sobhan Goudarzi, Mostafa Sharifzadeh, Adrian Basarab, Hassan Rivaz

Abstract: Ultrasound plane wave imaging is a cutting-edge technique that enables high frame-rate imaging. However, one challenge associated with high frame-rate ultrasound imaging is the high noise associated with them, hindering their wider adoption. Therefore, the development of a denoising method becomes imperative to augment the quality of plane wave images. Drawing inspiration from Denoising Diffusion… ▽ More Ultrasound plane wave imaging is a cutting-edge technique that enables high frame-rate imaging. However, one challenge associated with high frame-rate ultrasound imaging is the high noise associated with them, hindering their wider adoption. Therefore, the development of a denoising method becomes imperative to augment the quality of plane wave images. Drawing inspiration from Denoising Diffusion Probabilistic Models (DDPMs), our proposed solution aims to enhance plane wave image quality. Specifically, the method considers the distinction between low-angle and high-angle compounding plane waves as noise and effectively eliminates it by adapting a DDPM to beamformed radiofrequency (RF) data. The method underwent training using only 400 simulated images. In addition, our approach employs natural image segmentation masks as intensity maps for the generated images, resulting in accurate denoising for various anatomy shapes. The proposed method was assessed across simulation, phantom, and in vivo images. The results of the evaluations indicate that our approach not only enhances image quality on simulated data but also demonstrates effectiveness on phantom and in vivo data in terms of image quality. Comparative analysis with other methods underscores the superiority of our proposed method across various evaluation metrics. The source code and trained model will be released along with the dataset at: http://code.sonography.ai △ Less

Submitted 20 August, 2024; originally announced August 2024.

Phase Aberration Correction without Reference Data: An Adaptive Mixed Loss Deep Learning Approach

Authors: Mostafa Sharifzadeh, Habib Benali, Hassan Rivaz

Abstract: Phase aberration is one of the primary sources of image quality degradation in ultrasound, which is induced by spatial variations in sound speed across the heterogeneous medium. This effect disrupts transmitted waves and prevents coherent summation of echo signals, resulting in suboptimal image quality. In real experiments, obtaining non-aberrated ground truths can be extremely challenging, if not… ▽ More Phase aberration is one of the primary sources of image quality degradation in ultrasound, which is induced by spatial variations in sound speed across the heterogeneous medium. This effect disrupts transmitted waves and prevents coherent summation of echo signals, resulting in suboptimal image quality. In real experiments, obtaining non-aberrated ground truths can be extremely challenging, if not infeasible. It hinders the performance of deep learning-based phase aberration correction techniques due to sole reliance on simulated data and the presence of domain shift between simulated and experimental data. Here, for the first time, we propose a deep learning-based method that does not require reference data to compensate for the phase aberration effect. We train a network wherein both input and target output are randomly aberrated radio frequency (RF) data. Moreover, we demonstrate that a conventional loss function such as mean square error is inadequate for training the network to achieve optimal performance. Instead, we propose an adaptive mixed loss function that employs both B-mode and RF data, resulting in more efficient convergence and enhanced performance. Source code is available at \url{http://code.sonography.ai}. △ Less

Submitted 17 May, 2023; v1 submitted 10 March, 2023; originally announced March 2023.

An Ultra-Fast Method for Simulation of Realistic Ultrasound Images

Authors: Mostafa Sharifzadeh, Habib Benali, Hassan Rivaz

Abstract: Convolutional neural networks (CNNs) have attracted a rapidly growing interest in a variety of different processing tasks in the medical ultrasound community. However, the performance of CNNs is highly reliant on both the amount and fidelity of the training data. Therefore, scarce data is almost always a concern, particularly in the medical field, where clinical data is not easily accessible. The… ▽ More Convolutional neural networks (CNNs) have attracted a rapidly growing interest in a variety of different processing tasks in the medical ultrasound community. However, the performance of CNNs is highly reliant on both the amount and fidelity of the training data. Therefore, scarce data is almost always a concern, particularly in the medical field, where clinical data is not easily accessible. The utilization of synthetic data is a popular approach to address this challenge. However, but simulating a large number of images using packages such as Field II is time-consuming, and the distribution of simulated images is far from that of the real images. Herein, we introduce a novel ultra-fast ultrasound image simulation method based on the Fourier transform and evaluate its performance in a lesion segmentation task. We demonstrate that data augmentation using the images generated by the proposed method substantially outperforms Field II in terms of Dice similarity coefficient, while the simulation is almost 36000 times faster (both on CPU). △ Less

Submitted 21 September, 2021; originally announced September 2021.

Comments: arXiv admin note: text overlap with arXiv:2109.09969

A Case Study of Spherical Parallel Manipulators Fabricated via Laminate Processes

Authors: Mohammad Sharifzadeh, Roozbeh Khodambashi, Daniel Aukes

Abstract: This paper evaluates how laminated techniques may be used to replicate the performance of more traditionally manufactured robotic manipulators. In this case study, we introduce a laminated 2-DOF spherical, parallel manipulator. Taking advantage of laminating techniques in the construction of the robot can result in considerable saving in construction costs and time, but, the challenges caused by t… ▽ More This paper evaluates how laminated techniques may be used to replicate the performance of more traditionally manufactured robotic manipulators. In this case study, we introduce a laminated 2-DOF spherical, parallel manipulator. Taking advantage of laminating techniques in the construction of the robot can result in considerable saving in construction costs and time, but, the challenges caused by this technique have to be addressed. By using stiffer materials in rigid links, the rigidity of the robot is increased to an acceptable level. We discuss one method for compensating position uncertainty via an experimental identification technique which uses a neural network to create a forward kinematic model. Final results show that the proposed mechanism is able to track desired rotation with acceptable precision using open-loop model-based control. This indicates that parallel manipulators fabricated using lamination techniques can provide similar performance with prototypes made in conventional methods. △ Less

Submitted 24 September, 2018; originally announced October 2018.

ACM Class: I.2.9

On Locomotion of a Laminated Fish-inspired robot in a Small-to-size Environment

Authors: Mohammad Sharifzadeh, Roozbeh Khodambashi, Wenlong Zhang, Daniel Aukes

Abstract: Many different robots have been designed and built to work under water. In many cases, researchers have chosen to use bio-inspired platforms. In most cases, the main goal of the fish inspired robots has been set to autonomously swim and maneuver in an environment spacious compared to the fish's size. In this paper, the identification control of a low-cost fish-inspired robot is studied with the go… ▽ More Many different robots have been designed and built to work under water. In many cases, researchers have chosen to use bio-inspired platforms. In most cases, the main goal of the fish inspired robots has been set to autonomously swim and maneuver in an environment spacious compared to the fish's size. In this paper, the identification control of a low-cost fish-inspired robot is studied with the goal of building a mechanism to not only swim in water but able to interact with its narrow environment. The robotic fish under study uses tail propulsion as main locomotion. Moreover, proper propulsion regimes are identified and used to model and control thrust generated by propulsion. △ Less

Submitted 28 August, 2018; originally announced August 2018.

ACM Class: I.2.9

An Integrated Design and Simulation Environment for Rapid Prototyping of Laminate Robotic Mechanisms

Authors: Roozbeh Khodambashi, Mohammad Sharifzadeh, Daniel M. Aukes

Abstract: Laminate mechanisms are a reliable concept in producing lowcost robots for educational and commercial purposes. These mechanisms are produced using low-cost manufacturing techniques which have improved significantly during recent years and are more accessible to novices and hobbyists. However, iterating through the design space to come up with the best design for a robot is still a time consuming… ▽ More Laminate mechanisms are a reliable concept in producing lowcost robots for educational and commercial purposes. These mechanisms are produced using low-cost manufacturing techniques which have improved significantly during recent years and are more accessible to novices and hobbyists. However, iterating through the design space to come up with the best design for a robot is still a time consuming and rather expensive task and therefore, there is still a need for model-based analysis before manufacturing. Until now, there has been no integrated design and analysis software for laminate robots. This paper addresses some of the issues surrounding laminate analysis by introducing a companion to an existing laminate design tool that automates the generation of dynamic equations and produces simulation results via rendered plots and videos. We have validated the accuracy of the software by comparing the position, velocity and acceleration of the simulated mechanisms with the measurements taken from physical laminate prototypes using a motion capture system. △ Less

Submitted 10 August, 2018; originally announced August 2018.

ACM Class: I.2.9

Convolutional Neural Network Steganalysis's Application to Steganography

Authors: Mehdi Sharifzadeh, Chirag Agarwal, Mohammed Aloraini, Dan Schonfeld

Abstract: This paper presents a novel approach to increase the performance bounds of image steganography under the criteria of minimizing distortion. The proposed approach utilizes a steganalysis convolutional neural network (CNN) framework to understand an image's model and embed in less detectable regions to preserve the model. In other word, the trained steganalysis CNN is used to calculate derivatives o… ▽ More This paper presents a novel approach to increase the performance bounds of image steganography under the criteria of minimizing distortion. The proposed approach utilizes a steganalysis convolutional neural network (CNN) framework to understand an image's model and embed in less detectable regions to preserve the model. In other word, the trained steganalysis CNN is used to calculate derivatives of the statistical model of an image with respect to embedding changes. The experimental results show that the proposed algorithm outperforms previous state-of-the-art methods in a wide range of low relative payloads when compared with HUGO, S-UNIWARD, and HILL by the state-of-the-art steganalysis. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Comments: arXiv admin note: substantial text overlap with arXiv:1705.08616

A New Parallel Message-distribution Technique for Cost-based Steganography

Authors: Mehdi Sharifzadeh, Chirag Agarwal, Mahdi Salarian, Dan Schonfeld

Abstract: This paper presents two novel approaches to increase performance bounds of image steganography under the criteria of minimizing distortion. First, in order to efficiently use the images' capacities, we propose using parallel images in the embedding stage. The result is then used to prove sub-optimality of the message distribution technique used by all cost based algorithms including HUGO, S-UNIWAR… ▽ More This paper presents two novel approaches to increase performance bounds of image steganography under the criteria of minimizing distortion. First, in order to efficiently use the images' capacities, we propose using parallel images in the embedding stage. The result is then used to prove sub-optimality of the message distribution technique used by all cost based algorithms including HUGO, S-UNIWARD, and HILL. Second, a new distribution approach is presented to further improve the security of these algorithms. Experiments show that this distribution method avoids embedding in smooth regions and thus achieves a better performance, measured by state-of-the-art steganalysis, when compared with the current used distribution. △ Less

Submitted 7 July, 2019; v1 submitted 24 May, 2017; originally announced May 2017.

A Comparison with two semantic sensor data storages in total data transmission

Authors: Manaf Sharifzadeh, saeid aragy, Kaveh Bashash, Shahram Bashokian, mehdi gheisari

Abstract: The creation of small and cheap sensors promoted the emergence of large scale sensor networks. Sensor networks allow monitoring a variety of physical phenomena, like weather conditions (temperature, humidity, atmospheric pressure ...), traffic levels on highways or rooms occupancy in public buildings. Some of the sensors produce large volume of data such as weather temperature. These data should b… ▽ More The creation of small and cheap sensors promoted the emergence of large scale sensor networks. Sensor networks allow monitoring a variety of physical phenomena, like weather conditions (temperature, humidity, atmospheric pressure ...), traffic levels on highways or rooms occupancy in public buildings. Some of the sensors produce large volume of data such as weather temperature. These data should be stored somewhere for user queries. In this paper two known sensor data storage methods that store data semantically has been compared and it has been shown that storing data in ontology form consumes more energy so the lifetime of sensor network would decreases. The reason we choose them is that they are useful and popular. △ Less

Submitted 29 January, 2014; originally announced January 2014.

Fluid flow analysis in a rough fracture (type II) using complex networks and lattice Boltzmann method

Authors: H. Ghaffari, A. Nabovati, M. Sharifzadeh, R. P. Young

Abstract: Complexity of fluid flow in a rough fracture is induced by the complex configurations of opening areas between the fracture planes. In this study, we model fluid flow in an evolvable real rock joint structure, which under certain normal load is sheared. In an experimental study, information regarding about apertures of the rock joint during consecutive 20 mm displacements and fluid flow (permeabil… ▽ More Complexity of fluid flow in a rough fracture is induced by the complex configurations of opening areas between the fracture planes. In this study, we model fluid flow in an evolvable real rock joint structure, which under certain normal load is sheared. In an experimental study, information regarding about apertures of the rock joint during consecutive 20 mm displacements and fluid flow (permeability) in different pressure heads have been recorded by a scanner laser. Our aim in this study is to simulate the fluid flow in the mentioned complex geometries using the lattice Boltzmann method (LBM), while the characteristics of the aperture field will be compared with the modeled fluid flow permeability To characterize the aperture, we use a new concept in the graph theory, namely: complex networks and motif analysis of the corresponding networks. In this approach, the similar aperture profile along the fluid flow direction is mapped in to a network space. The modeled permeability using the LBM shows good correlation with the experimental measured values. Furthermore, the two main characters of the obtained networks, i.e., characteristic length and number of edges show the same evolutionary trend with the modeled permeability values. Analysis of motifs through the obtained networks showed the most transient sub-graphs are much more frequent in residual stages. This coincides with nearly stable fluid flow and high permeability values. △ Less

Submitted 6 March, 2011; originally announced March 2011.

Comments: 2011 PanAm-CGS Geotechnical Conference

Small World Property of a Rock Joint(Complexity of Frictional Interfaces: A Complex Network Perspective)

Authors: Hamed O. Ghaffari, M. Sharifzadeh, E. Evgin

Abstract: The shear strength and stick-slip behavior of a rough rock joint are analyzed using the complex network approach. We develop a network approach on correlation patterns of void spaces of an evolvable rough fracture (crack type II). Correlation among networks properties with the hydro -mechanical attributes (obtained from experimental tests) of fracture before and after slip is the direct result of… ▽ More The shear strength and stick-slip behavior of a rough rock joint are analyzed using the complex network approach. We develop a network approach on correlation patterns of void spaces of an evolvable rough fracture (crack type II). Correlation among networks properties with the hydro -mechanical attributes (obtained from experimental tests) of fracture before and after slip is the direct result of the revealed non-contacts networks. Joint distribution of locally and globally filtered correlation gives a close relation to the contact zones attachment-detachment sequences through the evolution of shear strength of the rock joint. Especially spread of node's degree rate to spread of clustering coefficient rate yielded possible stick and slip sequences during the displacements. Our method can be developed to investigate the complexity of stick-slip behavior of faults as well as energy /stress localization on crumpled shells/sheets in which ridge networks are controlling the energy distribution. △ Less

Submitted 23 August, 2011; v1 submitted 19 May, 2010; originally announced May 2010.

Journal ref: Geomechanics and Geoengineering: An International Journal,2012

Modeling of Social Transitions Using Intelligent Systems

Authors: Hamed Owladeghaffari, Witold Pedrycz, Mostafa Sharifzadeh

Abstract: In this study, we reproduce two new hybrid intelligent systems, involve three prominent intelligent computing and approximate reasoning methods: Self Organizing feature Map (SOM), Neruo-Fuzzy Inference System and Rough Set Theory (RST),called SONFIS and SORST. We show how our algorithms can be construed as a linkage of government-society interactions, where government catches various states of b… ▽ More In this study, we reproduce two new hybrid intelligent systems, involve three prominent intelligent computing and approximate reasoning methods: Self Organizing feature Map (SOM), Neruo-Fuzzy Inference System and Rough Set Theory (RST),called SONFIS and SORST. We show how our algorithms can be construed as a linkage of government-society interactions, where government catches various states of behaviors: solid (absolute) or flexible. So, transition of society, by changing of connectivity parameters (noise) from order to disorder is inferred. △ Less

Submitted 11 October, 2008; originally announced October 2008.

Permeability Analysis based on information granulation theory

Authors: M. Sharifzadeh, H. Owladeghaffari, K. Shahriar, E. Bakhtavar

Abstract: This paper describes application of information granulation theory, on the analysis of "lugeon data". In this manner, using a combining of Self Organizing Map (SOM) and Neuro-Fuzzy Inference System (NFIS), crisp and fuzzy granules are obtained. Balancing of crisp granules and sub- fuzzy granules, within non fuzzy information (initial granulation), is rendered in open-close iteration. Using two c… ▽ More This paper describes application of information granulation theory, on the analysis of "lugeon data". In this manner, using a combining of Self Organizing Map (SOM) and Neuro-Fuzzy Inference System (NFIS), crisp and fuzzy granules are obtained. Balancing of crisp granules and sub- fuzzy granules, within non fuzzy information (initial granulation), is rendered in open-close iteration. Using two criteria, "simplicity of rules "and "suitable adaptive threshold error level", stability of algorithm is guaranteed. In other part of paper, rough set theory (RST), to approximate analysis, has been employed >.Validation of the proposed methods, on the large data set of in-situ permeability in rock masses, in the Shivashan dam, Iran, has been highlighted. By the implementation of the proposed algorithm on the lugeon data set, was proved the suggested method, relating the approximate analysis on the permeability, could be applied. △ Less

Submitted 2 April, 2008; originally announced April 2008.

Comments: 8 pages,7 figures

ACM Class: F.4.1; K.3.2