-
Design of an improved microstrip antenna operating at a frequency band of 28GHz
Authors:
S. O. Zakariyya,
B. O. Sadiq,
R. A. Alao,
J. A. Adesina,
E. Obi
Abstract:
The design of an improved microstrip antenna operating in the 28 GHz frequency spectrum is the main goal of this work. The design used a Roger RT 5880 LZ substrate with a thickness and permittivity of 0.762mm and 1.96, respectively. The antenna was simulated in CST Microwave Studio. As the antenna feed, a quarter-wave transformer was used to provide an impedance match of 50 ohms. To improve the an…
▽ More
The design of an improved microstrip antenna operating in the 28 GHz frequency spectrum is the main goal of this work. The design used a Roger RT 5880 LZ substrate with a thickness and permittivity of 0.762mm and 1.96, respectively. The antenna was simulated in CST Microwave Studio. As the antenna feed, a quarter-wave transformer was used to provide an impedance match of 50 ohms. To improve the antenna's performance, a Ushaped element was added to the ground plane. The antenna resonated at 28 GHz frequency, according to simulation data, with a return loss of -21.4 dB, VSWR of 1.18, bandwidth of 2.026 GHz, and gain of 8.19 dB. The proposed antenna exhibits a performance improvement in terms of gain and bandwidth due to the addition of U-shaped element when benchmarked with existing designs in the literature work
△ Less
Submitted 29 December, 2024;
originally announced December 2024.
-
WiDRa -- Enabling Millimeter-Level Differential Ranging Accuracy in Wi-Fi Using Carrier Phase
Authors:
Vishnu V. Ratnam,
Bilal Sadiq,
Hao Chen,
Wei Sun,
Shunyao Wu,
Boon L. Ng,
Jianzhong,
Zhang
Abstract:
Although Wi-Fi is an ideal technology for many ranging applications, the performance of current methods is limited by the system bandwidth, leading to low accuracy of $\sim 1$ m. For many applications, measuring differential range, viz., the change in the range between adjacent measurements, is sufficient. Correspondingly, this work proposes WiDRa - a Wi-Fi based Differential Ranging solution that…
▽ More
Although Wi-Fi is an ideal technology for many ranging applications, the performance of current methods is limited by the system bandwidth, leading to low accuracy of $\sim 1$ m. For many applications, measuring differential range, viz., the change in the range between adjacent measurements, is sufficient. Correspondingly, this work proposes WiDRa - a Wi-Fi based Differential Ranging solution that provides differential range estimates by using the sum-carrier-phase information. The proposed method is not limited by system bandwidth and can track range changes even smaller than the carrier wavelength. The proposed method is first theoretically justified, while taking into consideration the various hardware impairments affecting Wi-Fi chips. In the process, methods to isolate the sum-carrier phase from the hardware impairments are proposed. Extensive simulation results show that WiDRa can achieve a differential range estimation root-mean-square-error (RMSE) of $\approx 1$ mm in channels with a Rician-factor $\geq 7$ (a $100 \times$ improvement to existing methods). The proposed methods are also validated on off-the-shelf Wi-Fi hardware to demonstrate feasibility, where they achieve an RMSE of $< 1$ mm in the differential range. Finally, limitations of current investigation and future directions of exploration are suggested, to further tap into the potential of WiDRa.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
A Spatio-Temporal based Frame Indexing Algorithm for QoS Improvement in Live Low-Motion Video Streaming
Authors:
Adewale Emmanuel Adedokun,
Muhammed Bashir Abdulrazak,
Muyideen Momoh Omuya,
Habeeb BelloSalau,
Bashir Olaniyi Sadiq
Abstract:
Real-time video life streaming of events over a network continued to gain more popularity among the populace. However, there is need to ensure the judicious utilization of allocated bandwidth without compromising the Quality of Service (QoS) of the system. In this regard, this paper presents an approach based on spatio-temporal frame indexing that detects and eliminate redundancy within and across…
▽ More
Real-time video life streaming of events over a network continued to gain more popularity among the populace. However, there is need to ensure the judicious utilization of allocated bandwidth without compromising the Quality of Service (QoS) of the system. In this regard, this paper presents an approach based on spatio-temporal frame indexing that detects and eliminate redundancy within and across captured frame, prior transmission from the server to clients. The standard and local low motion videos were the two scenarios considered in evaluating the performance of the proposed algorithm. Results obtained showed that the proposed approach achieved an improvement of 5.13%, 15.8% and 5%, 15.6% improvement in terms of the buffer size and compression ratio. Though with a tradeoff of the frame-built time, where both the standard and local frame indexing outperforms the proposed scheme with 10.8% and 8.71% respectively.
△ Less
Submitted 30 April, 2024;
originally announced April 2024.
-
Maximizing network capacity, control and management in designing a Telemedicine network: a review and recent challenges
Authors:
B. O. Sadiq,
O. S. Zakariyya,
M. D. Buhari,
A. N. Shuaibu
Abstract:
Telemedicine networks have seen significant changes in their capacity, monitoring, management, and control framework during the previous decades. The evolution of network capacity, control, and management for Unmanned Aerial Vehicle (UAV) & Software-Defined Networks (SDN) as support to telemedicine, artificial intelligence in telemedicine networks, and capabilities in designing a telemedicine netw…
▽ More
Telemedicine networks have seen significant changes in their capacity, monitoring, management, and control framework during the previous decades. The evolution of network capacity, control, and management for Unmanned Aerial Vehicle (UAV) & Software-Defined Networks (SDN) as support to telemedicine, artificial intelligence in telemedicine networks, and capabilities in designing a telemedicine network with respect to its performance and customization is presented in this study, with a historical history and a future view. The first section of the article goes over the history of traffic and capacity expansion, as well as future projections. By introducing a medical and image data communication protocol for telemedicine, the second section examines the technological constraints of expanding capacity in the era of UAV & software defined networking. The third section discusses ways to maximize network capacity by considering quality of service (QoS) capacity issues. Finally, the article explores how to construct a telemedicine network that can provide performance, customization, and capabilities to keep up with increased traffic in the coming decades. Research gaps and future directions were presented in the last section
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
On the Accuracy of Edge Detectors in Number Plate Extraction
Authors:
Bashir Olaniyi Sadiq
Abstract:
Edge detection as a pre-processing stage is a fundamental and important aspect of the number plate extraction system. This is due to the fact that the identification of a particular vehicle is achievable using the number plate because each number plate is unique to a vehicle. As such, the characters of a number plate system that differ in lines and shapes can be extracted using the principle of ed…
▽ More
Edge detection as a pre-processing stage is a fundamental and important aspect of the number plate extraction system. This is due to the fact that the identification of a particular vehicle is achievable using the number plate because each number plate is unique to a vehicle. As such, the characters of a number plate system that differ in lines and shapes can be extracted using the principle of edge detection. This paper presents a method of number plate extraction using edge detection technique. Edges in number plates are identified with changes in the intensity of pixel values. Therefore, these edges are identified using a single based pixel or collection of pixel-based approach. The efficiency of these approaches of edge detection algorithms in number plate extraction in both noisy and clean environment are experimented. Experimental results are achieved in MATLAB 2017b using the Pratt Figure of Merit (PFOM) as a performance metric
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Integrated Path Tracking with DYC and MPC using LSTM Based Tire Force Estimator for Four-wheel Independent Steering and Driving Vehicle
Authors:
Sungjin Lim,
Bilal Sadiq,
Yongsik Jin,
Sangho Lee,
Gyeungho Choi,
Kanghyun Nam,
Yongseob Lim
Abstract:
Active collision avoidance system plays a crucial role in ensuring the lateral safety of autonomous vehicles, and it is primarily related to path planning and tracking control algorithms. In particular, the direct yaw-moment control (DYC) system can significantly improve the lateral stability of a vehicle in environments with sudden changes in road conditions. In order to apply the DYC algorithm,…
▽ More
Active collision avoidance system plays a crucial role in ensuring the lateral safety of autonomous vehicles, and it is primarily related to path planning and tracking control algorithms. In particular, the direct yaw-moment control (DYC) system can significantly improve the lateral stability of a vehicle in environments with sudden changes in road conditions. In order to apply the DYC algorithm, it is very important to accurately consider the properties of tire forces with complex nonlinearity for control to ensure the lateral stability of the vehicle. In this study, longitudinal and lateral tire forces for safety path tracking were simultaneously estimated using a long short-term memory (LSTM) neural network based estimator. Furthermore, to improve path tracking performance in case of sudden changes in road conditions, a system has been developed by combining 4-wheel independent steering (4WIS) model predictive control (MPC) and 4-wheel independent drive (4WID) direct yaw-moment control (DYC). The estimation performance of the extended Kalman filter (EKF), which are commonly used for tire force estimation, was compared. In addition, the estimated longitudinal and lateral tire forces of each wheel were applied to the proposed system, and system verification was performed through simulation using a vehicle dynamics simulator. Consequently, the proposed method, the integrated path tracking algorithm with DYC and MPC using the LSTM based estimator, was validated to significantly improve the vehicle stability in suddenly changing road conditions.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
FANET Experiment: Real-Time Surveillance Applications Connected to Image Processing System
Authors:
Bashir Olaniyi Sadiq,
Muhammed Yusuf Abiodun,
Sikiru Olayinka Zakariyya,
Mohammed Dahiru Buhari
Abstract:
The major goal of this paper is to use image enhancement techniques for enhancing and extracting data in FANET applications to improve the efficiency of surveillance. The proposed conceptual system design can improve the likelihood of FANET operations in oil pipeline surveillance, and sports and media coverage with the ultimate goal of providing efficient services to those who are interested. The…
▽ More
The major goal of this paper is to use image enhancement techniques for enhancing and extracting data in FANET applications to improve the efficiency of surveillance. The proposed conceptual system design can improve the likelihood of FANET operations in oil pipeline surveillance, and sports and media coverage with the ultimate goal of providing efficient services to those who are interested. The system architecture model is based on current scientific principles and developing technologies. A FANET, which is capable of gathering image data from video-enabled drones, and an image processing system that permits data collection and analysis are the two primary components of the system. Based on the image processing technique, a proof of concept for efficient data extraction and enhancement in FANET situations and possible services is illustrated.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Fault-Tolerant Backup Clustering Algorithm for Smart Connected Underwater Sensor Networks
Authors:
Abdulazeez Femi Salami,
Emmanuel Adewale Adedokun,
Habeeb Bello-Salau,
Bashir Olaniyi Sadiq
Abstract:
This paper addresses poor cluster formation and frequent Cluster Head (CH) failure issues of underwater sensor networks by proposing an energy-efficient hierarchical topology-aware clustering routing (EEHTAC) protocol. In this paper, fault-tolerant backup clustering (FTBC) algorithms and multi-parameter cluster formation (MPCF) model were developed for the EEHTAC operation. The MPCF model tackles…
▽ More
This paper addresses poor cluster formation and frequent Cluster Head (CH) failure issues of underwater sensor networks by proposing an energy-efficient hierarchical topology-aware clustering routing (EEHTAC) protocol. In this paper, fault-tolerant backup clustering (FTBC) algorithms and multi-parameter cluster formation (MPCF) model were developed for the EEHTAC operation. The MPCF model tackles the issue of poor cluster formation performance by integrating multiple parameters to achieve effective clustering process. The FTBC algorithms tackle the issue of frequent CH failures to avoid interruption in data transmission. Performance of the MPCF model was evaluated using normal, high-fault, and high routing overhead network scenarios. Performance metrics employed for this analysis are temporal topology variation ratio (TTVR), CH load distribution (CLD), and cluster stability (STB). Obtained results show that operating with a CH retention period of 90s achieves better CH duty cycling per round and improves the MPCF process with values of 25.69%, 55.56%, and 60% for TTVR, CLD, and STB respectively. Performance of the FTBC-based EEHTAC was evaluated relative to Energy-balanced Unequal Layering Clustering (EULC) protocol. Performance indicators adopted for this evaluation are routing overhead (Ω), end to end delay (Δ), CH failures recovered (CFR), CH failures detected (CFD), received packets (θ), and energy consumption (Σ). With reference to the best obtained values, EEHTAC demonstrated performance improvement of 58.40%, 29.94%, 81.33%, 28.02%, 86.65%, and 54.35% over EULC variants in terms of Ω, Δ, CFR, CFD, θ, and Σ respectively. Obtained results displayed that the MPCF model is efficient for cluster formation performance and the FTBC-based EEHTAC protocol can perform effectively well against an existing CBR protocol.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Development of Video Frame Enhancement Technique Using Pixel Intensity Analysis
Authors:
H. A. Abdulkareem,
A. M. S. Tekanyi,
I. Yau,
B. O. Sadiq
Abstract:
This paper developed a brightness enhancement technique for video frame pixel intensity improvement. Frames extracted from the six sample video data used in this work were stored in the form of images in a buffer. Noise was added to the extracted image frames to vary the intensity of their pixels so that the pixel values of the noisy images differ from their true values in order to determine the e…
▽ More
This paper developed a brightness enhancement technique for video frame pixel intensity improvement. Frames extracted from the six sample video data used in this work were stored in the form of images in a buffer. Noise was added to the extracted image frames to vary the intensity of their pixels so that the pixel values of the noisy images differ from their true values in order to determine the efficiency of the developed technique. Simulation results showed that, the developed technique was efficient with an improved pixel intensity and histogram distribution. The Peak to Signal Noise Ratio evaluation showed that the efficiency of the developed technique for both grayscale and coloured video frames were improved by PSNR of 12.45%, 16.32%, 27.57% and 19.83% over the grey level colour (black and white) for the NAELS1.avi, NAELS2.avi, NTA1.avi and NTA2.avi respectively. Also, a percentage improvement of 28.93% and 31.68% were obtained for the coloured image over the grey level image for Akiyo.avi and Forman.avi benchmark video frame, respectively.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
The Impact of Mobility Model in the Optimal placement of Sensor Nodes in Wireless Body Sensor Network
Authors:
B. O. Sadiq,
A. E Adedokun,
Z. M Abubakar
Abstract:
Power and energy consumption is a fundamental issue in Body Sensor Networks (BSNs) since nodes must operate properly and autonomously for a certain period of time without battery replacement or change. This is due to the fact that the sensors in BSNs are either implanted in the body or are in very near position to the body. Thus, the duration of replacing the batteries should be of utmost importan…
▽ More
Power and energy consumption is a fundamental issue in Body Sensor Networks (BSNs) since nodes must operate properly and autonomously for a certain period of time without battery replacement or change. This is due to the fact that the sensors in BSNs are either implanted in the body or are in very near position to the body. Thus, the duration of replacing the batteries should be of utmost importance. Most of the existing researches suggested the development of a more improved battery cells or developing an energy aware routing protocol to tackle the energy consumption in WBSN. But this is not the case as most energy consumption in WBSN occur as a result of mobility in routing and sensor node placement. Therefore, improving the battery cells might not solve the energy consumption in WBSN.
△ Less
Submitted 4 January, 2018;
originally announced January 2018.
-
Evaluative Assessment of an X-band Microstrip Patch Antenna for Wireless Systems
Authors:
A. F. Salami,
O. S. Zakariyya,
B. O. Sadiq,
O. A. Abdulrahman
Abstract:
Microstrip patch antennas (MPAs) are rapidly gaining more attention due to the proliferation of communication devices and systems with frequencies becoming more suitable for the size and performance of this type of antenna. Due to recent advancements in semiconductor technology, high dielectric constant materials are used to achieve additional size reduction which has made MPAs very useful and pop…
▽ More
Microstrip patch antennas (MPAs) are rapidly gaining more attention due to the proliferation of communication devices and systems with frequencies becoming more suitable for the size and performance of this type of antenna. Due to recent advancements in semiconductor technology, high dielectric constant materials are used to achieve additional size reduction which has made MPAs very useful and popular in the design of mobile devices and wireless systems. However, MPAs suffer from problems associated with narrow bandwidth and low gain. Techniques employed for improving the performance of MPA hinge on tweaking features such as the patch size, substrate height, ground plane size and feeding method. In view of this, this research designs and analyzes the performance of an X-band MPA for wireless systems using CST Microwave Studio. Including the ground plane, the proposed design has a low profile structure of 17 mm x 17 mm x 1.6 mm which is suitable for wireless systems. The proposed design also resonates at a frequency of 10 GHz with an omnidirectional radiation pattern exhibiting a gain of 7.2 dBi. Return Loss, VSWR, Gain and Radiation Pattern are the performance indicators employed in this research. The proposed MPA design demonstrates marked performance improvement when benchmarked with a similar MPA designed for 5G applications.
△ Less
Submitted 2 September, 2017;
originally announced September 2017.
-
A Feasibility Study of Using Light Fidelity With Multiple Unmanned Aerial Vehicles For Indoor Collaborative And Cooperative Networking
Authors:
B. O Sadiq
Abstract:
This paper evaluates the feasibility of using light fidelity with multiple Unmanned Aerial Vehicles (UAVs) for indoor collaborative and cooperative networking. A number of works have presentedchallenges for wireless networking with multiple UAVs such as bandwidth efficiency, security and environment amongst others. Due to this fact, there is a need to secure information and data in UAV ad hoc netw…
▽ More
This paper evaluates the feasibility of using light fidelity with multiple Unmanned Aerial Vehicles (UAVs) for indoor collaborative and cooperative networking. A number of works have presentedchallenges for wireless networking with multiple UAVs such as bandwidth efficiency, security and environment amongst others. Due to this fact, there is a need to secure information and data in UAV ad hoc network (FANETs) using a secure transmission medium that guarantees bandwidth efficiency such as the light fidelity (Li-Fi). Li-Fi enables data transmission using visible light through a light emitting diode (LED) and is chosen as against wireless fidelity (Wi- Fi) because it is more ideal for high density wireless data coverage in confined areas, better at addressing radio interference related issues and provides better bandwidth, efficiency, availability and security. Thus, using Light Fidelity as a means of communication necessitates the need to develop a Link Velocity Based Connectivity Algorithm (LVCA) that governs communication between the UAVs and the Li-Fi transmitter and receiver circuits for collaborative and cooperative networking.
△ Less
Submitted 16 July, 2017;
originally announced July 2017.
-
Inband device-to-device relays in cellular networks
Authors:
Bilal Sadiq,
Saurabh Tavildar,
Junyi Li
Abstract:
A new design for two-hop opportunistic relaying in cellular networks is proposed, with the objective of throughput improvement. We propose using idle UEs in a cellular system with better channel to the base station to relay traffic for active UEs. One of the key ideas proposed is the use of (only) uplink spectrum for the Access links, and corresponding interference management schemes for managing…
▽ More
A new design for two-hop opportunistic relaying in cellular networks is proposed, with the objective of throughput improvement. We propose using idle UEs in a cellular system with better channel to the base station to relay traffic for active UEs. One of the key ideas proposed is the use of (only) uplink spectrum for the Access links, and corresponding interference management schemes for managing interference between Access and Backhaul links. The proposed algorithms and architecture show a median throughput gain of 110% for downlink and 40% for uplink in system simulations performed according to the 3GPP methodology.
△ Less
Submitted 8 October, 2015;
originally announced October 2015.
-
An approach to improving edge detection for facial and remotely sensed images using vector order statistics
Authors:
B O. Sadiq,
S. M. Sani,
S. Garba
Abstract:
This paper presents an improved edge detection algorithm for facial and remotely sensed images using vector order statistics. The developed algorithm processes colored images directly without been converted to gray scale. A number of the existing algorithms converts the colored images into gray scale before detection of edges. But this process leads to inaccurate precision of recognized edges, thu…
▽ More
This paper presents an improved edge detection algorithm for facial and remotely sensed images using vector order statistics. The developed algorithm processes colored images directly without been converted to gray scale. A number of the existing algorithms converts the colored images into gray scale before detection of edges. But this process leads to inaccurate precision of recognized edges, thus producing false and broken edges in the output edge map. Facial and remotely sensed images consist of curved edge lines which have to be detected continuously to prevent broken edges. In order to deal with this, a collection of pixel approach is introduced with a view to minimizing the false and broken edges that exists in the generated output edge map of facial and remotely sensed images.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
Edge Detection: A Collection of Pixel based Approach for Colored Images
Authors:
B. O Sadiq,
S. M Sani,
S Garba
Abstract:
The existing traditional edge detection algorithms process a single pixel on an image at a time, thereby calculating a value which shows the edge magnitude of the pixel and the edge orientation. Most of these existing algorithms convert the coloured images into gray scale before detection of edges. However, this process leads to inaccurate precision of recognized edges, thus producing false and br…
▽ More
The existing traditional edge detection algorithms process a single pixel on an image at a time, thereby calculating a value which shows the edge magnitude of the pixel and the edge orientation. Most of these existing algorithms convert the coloured images into gray scale before detection of edges. However, this process leads to inaccurate precision of recognized edges, thus producing false and broken edges in the image. This paper presents a profile modelling scheme for collection of pixels based on the step and ramp edges, with a view to reducing the false and broken edges present in the image. The collection of pixel scheme generated is used with the Vector Order Statistics to reduce the imprecision of recognized edges when converting from coloured to gray scale images. The Pratt Figure of Merit (PFOM) is used as a quantitative comparison between the existing traditional edge detection algorithm and the developed algorithm as a means of validation. The PFOM value obtained for the developed algorithm is 0.8480, which showed an improvement over the existing traditional edge detection algorithms.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
Polynomial-complexity, Low-delay Scheduling for SCFDMA-based Wireless Uplink Networks (Technical Report)
Authors:
Shreeshankar Bodas,
Bilal Sadiq
Abstract:
Uplink scheduling/resource allocation under the single-carrier FDMA constraint is investigated, taking into account the queuing dynamics at the transmitters. Under the single-carrier constraint, the problem of MaxWeight scheduling, as well as that of determining if a given number of packets can be served from all the users, are shown to be NP-complete. Finally, a matching-based scheduling algorith…
▽ More
Uplink scheduling/resource allocation under the single-carrier FDMA constraint is investigated, taking into account the queuing dynamics at the transmitters. Under the single-carrier constraint, the problem of MaxWeight scheduling, as well as that of determining if a given number of packets can be served from all the users, are shown to be NP-complete. Finally, a matching-based scheduling algorithm is presented that requires only a polynomial number of computations per timeslot, and in the case of a system with large bandwidth and user population, provably provides a good delay (small-queue) performance, even under the single-carrier constraint.
In summary, the results in first part of the paper support the recent push to remove SCFDMA from the Standards, whereas those in the second part present a way of working around the single-carrier constraint if it remains in the Standards.
△ Less
Submitted 7 January, 2013;
originally announced January 2013.
-
Large deviations sum-queue optimality of a radial sum-rate monotone opportunistic scheduler
Authors:
Bilal Sadiq,
Gustavo de Veciana
Abstract:
A centralized wireless system is considered that is serving a fixed set of users with time varying channel capacities. An opportunistic scheduling rule in this context selects a user (or users) to serve based on the current channel state and user queues. Unless the user traffic is symmetric and/or the underlying capacity region a polymatroid, little is known concerning how performance optimal sch…
▽ More
A centralized wireless system is considered that is serving a fixed set of users with time varying channel capacities. An opportunistic scheduling rule in this context selects a user (or users) to serve based on the current channel state and user queues. Unless the user traffic is symmetric and/or the underlying capacity region a polymatroid, little is known concerning how performance optimal schedulers should tradeoff "maximizing current service rate" (being opportunistic) versus "balancing unequal queues" (enhancing user-diversity to enable future high service rate opportunities). By contrast with currently proposed opportunistic schedulers, e.g., MaxWeight and Exp Rule, a radial sum-rate monotone (RSM) scheduler de-emphasizes queue-balancing in favor of greedily maximizing the system service rate as the queue-lengths are scaled up linearly. In this paper it is shown that an RSM opportunistic scheduler, p-Log Rule, is not only throughput-optimal, but also maximizes the asymptotic exponential decay rate of the sum-queue distribution for a two-queue system. The result complements existing optimality results for opportunistic scheduling and point to RSM schedulers as a good design choice given the need for robustness in wireless systems with both heterogeneity and high degree of uncertainty.
△ Less
Submitted 12 March, 2010; v1 submitted 24 June, 2009;
originally announced June 2009.
