Showing 1–7 of 7 results for author: Munir, J

Efficient Non-linear Equalization for 1-bit Quantized Cyclic Prefix-Free Massive MIMO Systems

Authors: Daniel Plabst, Jawad Munir, Amine Mezghani, Josef A. Nossek

Abstract: This paper addresses the problem of data detection for a massive Multiple-Input-Multiple-Output (MIMO) base station which utilizes 1-bit Analog-to-Digital Converters (ADCs) for quantizing the uplink signal. The existing literature on quantized massive MIMO systems deals with Cyclic Prefix (CP) transmission over frequency-selective channels. In this paper, we propose a computationally efficient blo… ▽ More This paper addresses the problem of data detection for a massive Multiple-Input-Multiple-Output (MIMO) base station which utilizes 1-bit Analog-to-Digital Converters (ADCs) for quantizing the uplink signal. The existing literature on quantized massive MIMO systems deals with Cyclic Prefix (CP) transmission over frequency-selective channels. In this paper, we propose a computationally efficient block processing equalizer based on the Expectation Maximization (EM) algorithm in CP-free transmission for 1-bit quantized systems. We investigate the optimal block length and overlapping factor in relation to the Channel Impulse Response (CIR) length based on the Bit Error-Rate (BER) performance metric. As EM is a non-linear algorithm, the optimal estimate is found iteratively depending on the initial starting point of the algorithm. Through numerical simulations we show that initializing the EM-algorithm with a Wiener-Filter (WF) estimate, which takes the underlying quantization into account, achieves superior BER-performance compared to initialization with other starting points. △ Less

Submitted 28 June, 2018; v1 submitted 27 April, 2018; originally announced April 2018.

Comments: Accepted in ISWCS 2018, 15th International Symposium on Wireless Communication Systems, Lisbon, Portugal

Efficient Equalization Method for Cyclic Prefix-Free Coarsely Quantized Massive MIMO Systems

Authors: Jawad Munir, Daniel Plabst, Josef A. Nossek

Abstract: The use of low resolution Analog to Digital Converters (ADCs) can significantly reduce the power consumption for massive Multiple Input Multiple Output (MIMO) systems. The existing literature on quantized massive MIMO systems deals with Cyclic Prefix (CP) transmission schemes in frequency-selective fading channels. In this paper, we propose a block processing Frequency Domain Equalization (FDE) te… ▽ More The use of low resolution Analog to Digital Converters (ADCs) can significantly reduce the power consumption for massive Multiple Input Multiple Output (MIMO) systems. The existing literature on quantized massive MIMO systems deals with Cyclic Prefix (CP) transmission schemes in frequency-selective fading channels. In this paper, we propose a block processing Frequency Domain Equalization (FDE) technique in CP-free transmission schemes for massive MIMO systems having low resolution ADCs. The optimal block length for FDE is found by minimizing a computational complexity cost function and taking quantization distortion, channel impulse response and the number of transmit and receiver antennas into account. Through numerical simulation, it is shown that the optimal block length also guarantees good performance in terms of the Mean Square Error (MSE) and Bit Error-Rate (BER) criterion. △ Less

Submitted 24 April, 2018; originally announced April 2018.

Comments: Submitted to and accepted at ICC 2018

Spatial Coding Based on Minimum BER in 1-Bit Massive MIMO Systems

Authors: Hela Jedda, Amine Mezghani, Jawad Munir, Fabian Steiner, Josef A. Nossek

Abstract: We consider a downlink 1-bit quantized multiuser (MU) multiple-input-multiple-output (MIMO) system, where 1-bit digital-to-analog (DACs) and analog-to-digital converters (ADCs) are used at the transmitter and the receiver for economical and computational efficiency. We end up with a discrete memoryless channel with input and output vectors belonging to the QPSK constellation. In the context of mas… ▽ More We consider a downlink 1-bit quantized multiuser (MU) multiple-input-multiple-output (MIMO) system, where 1-bit digital-to-analog (DACs) and analog-to-digital converters (ADCs) are used at the transmitter and the receiver for economical and computational efficiency. We end up with a discrete memoryless channel with input and output vectors belonging to the QPSK constellation. In the context of massive (MIMO) systems the number of base station (BS) antennas is much larger than the number of receive antennas. This leads to high input cardinality of the channel. In this work we introduce a method to reduce the input set based on the mimimum bit-error-ratio (BER) criterion combined with a non-linear precoding technique. This method is denoted as spatial coding. Simulations show that this spatial coding improves the BER behavior significantly removing the error floor due to coarse quantization. △ Less

Submitted 27 June, 2017; originally announced June 2017.

Comments: Presented in Asilomar Conference on Signals, Systems, and Computers 2016, 6th-9th November 2016, Pacific Grove, CA

Power- and Spectral Efficient Communication System Design Using 1-Bit Quantization

Authors: Hela Jedda, Muhammad Mudussir Ayub, Jawad Munir, Amine Mezghani, Josef A. Nossek

Abstract: Improving the power efficiency and spectral efficiency of communication systems has been one of the major research goals over the recent years. However, there is a tradeoff in achieving both goals at the same time. In this work, we consider the joint optimization of the power amplifier and a pulse shaping filter over a single-input single-output (SISO) additive white Gaussian noise (AWGN) channel… ▽ More Improving the power efficiency and spectral efficiency of communication systems has been one of the major research goals over the recent years. However, there is a tradeoff in achieving both goals at the same time. In this work, we consider the joint optimization of the power amplifier and a pulse shaping filter over a single-input single-output (SISO) additive white Gaussian noise (AWGN) channel using 1-bit analog-todigital (ADC) and digital-to-analog (DAC) converters. The goal of the optimization is the selection of the optimal system parameters in order to maximize the desired figure-of-merit (FOM) which is the product of power efficiency and spectral efficiency. Simulation results give an insight in choosing the optimal parameters of the pulse shaping filter and power amplifier to maximize the desired FOM. △ Less

Submitted 27 June, 2017; originally announced June 2017.

Channel Estimation and Data Equalization in Frequency-Selective MIMO Systems with One-Bit Quantization

Authors: Javier García, Jawad Munir, Kilian Roth, Josef A. Nossek

Abstract: This paper addresses channel estimation and data equalization on frequency-selective 1-bit quantized Multiple Input-Multiple Output (MIMO) systems. No joint processing or Channel State Information is assumed at the transmitter, and therefore our findings are also applicable to the uplink of Multi-User MIMO systems. System models for both Orthogonal Division Frequency Multiplexing (OFDM) and single… ▽ More This paper addresses channel estimation and data equalization on frequency-selective 1-bit quantized Multiple Input-Multiple Output (MIMO) systems. No joint processing or Channel State Information is assumed at the transmitter, and therefore our findings are also applicable to the uplink of Multi-User MIMO systems. System models for both Orthogonal Division Frequency Multiplexing (OFDM) and single-carrier schemes are developed. A Cramér-Rao Lower Bound for the estimation problems is derived. The two nonlinear algorithms Expectation Maximization (EM) and Generalized Approximate Message Passing (GAMP) are adapted to the problems, and a linear method based on the Bussgang theorem is proposed. In the OFDM case, the linear method enables subcarrier-wise estimation, greatly reducing computational complexity. Simulations are carried out to compare the algorithms with different settings. The results turn out to be close to the Cramér-Rao bound in the low Signal to Noise Ratio (SNR) region. The OFDM setting is more suitable for the nonlinear algorithms, and that the linear methods incur a performance loss with respect to the nonlinear approaches. In the relevant low and medium SNR regions, the loss amounts to 2-3 dB and might well be justified in exchange for the reduced computational effort, especially in Massive MIMO settings. △ Less

Submitted 7 March, 2021; v1 submitted 15 September, 2016; originally announced September 2016.

Compensation of Amplifier Distortion for OFDM signals based on Iterative Hard Thresholding

Authors: Wasim Amjad, Javier García, Jawad Munir, Amine Mezghani, Josef A. Nossek

Abstract: The mitigation of nonlinear distortion caused by power amplifiers (PA) in Orthogonal Frequency Division Multiplexing (OFDM) systems is an essential issue to enable energy efficient operation. In this work we proposed a new algorithm for receiver-based clipping estimation in OFDM systems that combines the Iterative Hard Thresholding (IHT) method with a weighting corresponding to the estimated proba… ▽ More The mitigation of nonlinear distortion caused by power amplifiers (PA) in Orthogonal Frequency Division Multiplexing (OFDM) systems is an essential issue to enable energy efficient operation. In this work we proposed a new algorithm for receiver-based clipping estimation in OFDM systems that combines the Iterative Hard Thresholding (IHT) method with a weighting corresponding to the estimated probability of clipping. Thereby a more general amplifier input-output characteristic is considered, which is assumed to be unknown at the receiver side. Further, we avoid the use of dedicated subcarriers and formulate the recovery problem solely on reliably detected sub-carriers. Through simulations, we show that the proposed technique achieves a better complexity-performance tradeoff compared to existing methods. △ Less

Submitted 1 July, 2015; originally announced July 2015.

Comments: 5 pages

Chromatic Dispersion Compensation Using Filter Bank Based Complex-Valued All-Pass Filter

Authors: Jawad Munir, Amine Mezghani, Haris Khawar, Josef A. Nossek

Abstract: A long-haul transmission of 100 Gb/s without optical chromatic-dispersion (CD) compensation provides a range of benefits regarding cost effectiveness, power budget, and nonlinearity tolerance. The channel memory is largely dominated by CD in this case with an intersymbol-interference spread of more than 100 symbol durations. In this paper, we propose CD equalization technique based on nonmaximally… ▽ More A long-haul transmission of 100 Gb/s without optical chromatic-dispersion (CD) compensation provides a range of benefits regarding cost effectiveness, power budget, and nonlinearity tolerance. The channel memory is largely dominated by CD in this case with an intersymbol-interference spread of more than 100 symbol durations. In this paper, we propose CD equalization technique based on nonmaximally decimated discrete Fourier transform (NMDFT) filter bank (FB) with non-trivial prototype filter and complex-valued infinite impulse response (IIR) all-pass filter per sub-band. The design of the sub-band IIR all-pass filter is based on minimizing the mean square error (MSE) in group delay and phase cost functions in an optimization framework. Necessary conditions are derived and incorporated in a multi-step and multi-band optimization framework to ensure the stability of the resulting IIR filter. It is shown that the complexity of the proposed method grows logarithmically with the channel memory, therefore, larger CD values can be tolerated with our approach. △ Less

Submitted 27 November, 2016; v1 submitted 7 March, 2014; originally announced March 2014.