-
Model-based optimisation for the personalisation of robot-assisted gait training
Authors:
Andreas Christou,
Daniel F. N. Gordon,
Theodoros Stouraitis,
Juan C. Moreno,
Sethu Vijayakumar
Abstract:
Personalised rehabilitation can be key to promoting gait independence and quality of life. Robots can enhance therapy by systematically delivering support in gait training, but often use one-size-fits-all control methods, which can be suboptimal. Here, we describe a model-based optimisation method for designing and fine-tuning personalised robotic controllers. As a case study, we formulate the obj…
▽ More
Personalised rehabilitation can be key to promoting gait independence and quality of life. Robots can enhance therapy by systematically delivering support in gait training, but often use one-size-fits-all control methods, which can be suboptimal. Here, we describe a model-based optimisation method for designing and fine-tuning personalised robotic controllers. As a case study, we formulate the objective of providing assistance as needed as an optimisation problem, and we demonstrate how musculoskeletal modelling can be used to develop personalised interventions. Eighteen healthy participants (age = 26 +/- 4) were recruited and the personalised control parameters for each were obtained to provide assistance as needed during a unilateral tracking task. A comparison was carried out between the personalised controller and the non-personalised controller. In simulation, a significant improvement was predicted when the personalised parameters were used. Experimentally, responses varied: six subjects showed significant improvements with the personalised parameters, eight subjects showed no obvious change, while four subjects performed worse. High interpersonal and intra-personal variability was observed with both controllers. This study highlights the importance of personalised control in robot-assisted gait training, and the need for a better estimation of human-robot interaction and human behaviour to realise the benefits of model-based optimisation.
△ Less
Submitted 1 March, 2025;
originally announced March 2025.
-
Adaptive Control for Triadic Human-Robot-FES Collaboration in Gait Rehabilitation: A Pilot Study
Authors:
Andreas Christou,
Antonio J. del-Ama,
Juan C. Moreno,
Sethu Vijayakumar
Abstract:
The hybridisation of robot-assisted gait training and functional electrical stimulation (FES) can provide numerous physiological benefits to neurological patients. However, the design of an effective hybrid controller poses significant challenges. In this over-actuated system, it is extremely difficult to find the right balance between robotic assistance and FES that will provide personalised assi…
▽ More
The hybridisation of robot-assisted gait training and functional electrical stimulation (FES) can provide numerous physiological benefits to neurological patients. However, the design of an effective hybrid controller poses significant challenges. In this over-actuated system, it is extremely difficult to find the right balance between robotic assistance and FES that will provide personalised assistance, prevent muscle fatigue and encourage the patient's active participation in order to accelerate recovery. In this paper, we present an adaptive hybrid robot-FES controller to do this and enable the triadic collaboration between the patient, the robot and FES. A patient-driven controller is designed where the voluntary movement of the patient is prioritised and assistance is provided using FES and the robot in a hierarchical order depending on the patient's performance and their muscles' fitness. The performance of this hybrid adaptive controller is tested in simulation and on one healthy subject. Our results indicate an increase in tracking performance with lower overall assistance, and less muscle fatigue when the hybrid adaptive controller is used, compared to its non adaptive equivalent. This suggests that our hybrid adaptive controller may be able to adapt to the behaviour of the user to provide assistance as needed and prevent the early termination of physical therapy due to muscle fatigue.
△ Less
Submitted 8 March, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
The GREENBOT dataset: Multimodal mobile robotic dataset for a typical Mediterranean greenhouse
Authors:
Fernando Cañadas-Aránega,
Jose Luis Blanco-Claraco,
Jose Carlos Moreno,
Francisco Rodriguez
Abstract:
This paper introduces an innovative dataset specifically crafted for challenging agricultural settings (a greenhouse), where achieving precise localization is of paramount importance. The dataset was gathered using a mobile platform equipped with a set of sensors typically used in mobile robots, as it was moved through all the corridors of a typical Mediterranean greenhouse featuring tomato crop.…
▽ More
This paper introduces an innovative dataset specifically crafted for challenging agricultural settings (a greenhouse), where achieving precise localization is of paramount importance. The dataset was gathered using a mobile platform equipped with a set of sensors typically used in mobile robots, as it was moved through all the corridors of a typical Mediterranean greenhouse featuring tomato crop. This dataset presents a unique opportunity for constructing detailed 3D models of plants in such indoor-like space, with potential applications such as robotized spraying. For the first time to the best knowledge of authors, a dataset suitable to put at test Simultaneous Localization and Mapping (SLAM) methods is presented in a greenhouse environment, which poses unique challenges. The suitability of the dataset for such goal is assessed by presenting SLAM results with state-of-the-art algorithms. The dataset is available online in \url{https://arm.ual.es/arm-group/dataset-greenhouse-2024/}.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
MultiVehicle Simulator (MVSim): lightweight dynamics simulator for multiagents and mobile robotics research
Authors:
José-Luis Blanco-Claraco,
Borys Tymchenko,
Francisco José Mañas-Alvarez,
Fernando Cañadas-Aránega,
Ángel López-Gázquez,
José Carlos Moreno
Abstract:
Development of applications related to closed-loop control requires either testing on the field or on a realistic simulator, with the latter being more convenient, inexpensive, safe, and leading to shorter development cycles. To address that need, the present work introduces MVSim, a simulator for multiple vehicles or robots capable of running dozens of agents in simple scenarios, or a handful of…
▽ More
Development of applications related to closed-loop control requires either testing on the field or on a realistic simulator, with the latter being more convenient, inexpensive, safe, and leading to shorter development cycles. To address that need, the present work introduces MVSim, a simulator for multiple vehicles or robots capable of running dozens of agents in simple scenarios, or a handful of them in complex scenarios. MVSim employs realistic physics-grounded friction models for tire-ground interaction, and aims at accurate and GPU-accelerated simulation of most common modern sensors employed in mobile robotics and autonomous vehicle research, such as depth and RGB cameras, or 2D and 3D LiDAR scanners. All depth-related sensors are able to accurately measure distances to 3D models provided by the user to define custom world elements. Efficient simulation is achieved by means of focusing on ground vehicles, which allows the use of a simplified 2D physics engine for body collisions while solving wheel-ground interaction forces separately. The core parts of the system are written in C++ for maximum efficiency, while Python, ROS 1, and ROS 2 wrappers are also offered for easy integration into user systems. A custom publish/subscribe protocol based on ZeroMQ (ZMQ) is defined to allow for multiprocess applications to access or modify a running simulation. This simulator enables and makes easier to do research and development on vehicular dynamics, autonomous navigation algorithms, and simultaneous localization and mapping (SLAM) methods.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Adaptive diffusion constrained total variation scheme with application to `cartoon + texture + edge' image decomposition
Authors:
Juan C. Moreno,
V. B. Surya Prasath,
D. Vorotnikov,
H. Proenca,
K. Palaniappan
Abstract:
We consider an image decomposition model involving a variational (minimization) problem and an evolutionary partial differential equation (PDE). We utilize a linear inhomogenuous diffusion constrained and weighted total variation (TV) scheme for image adaptive decomposition. An adaptive weight along with TV regularization splits a given image into three components representing the geometrical (car…
▽ More
We consider an image decomposition model involving a variational (minimization) problem and an evolutionary partial differential equation (PDE). We utilize a linear inhomogenuous diffusion constrained and weighted total variation (TV) scheme for image adaptive decomposition. An adaptive weight along with TV regularization splits a given image into three components representing the geometrical (cartoon), textural (small scale - microtextures), and edges (big scale - macrotextures). We study the wellposedness of the coupled variational-PDE scheme along with an efficient numerical scheme based on Chambolle's dual minimization method. We provide extensive experimental results in cartoon-texture-edges decomposition, and denoising as well compare with other related variational, coupled anisotropic diffusion PDE based methods.
△ Less
Submitted 4 May, 2015;
originally announced May 2015.
-
On Convergent Finite Difference Schemes for Variational - PDE Based Image Processing
Authors:
V. B. S. Prasath,
Juan C. Moreno
Abstract:
We study an adaptive anisotropic Huber functional based image restoration scheme. By using a combination of L2-L1 regularization functions, an adaptive Huber functional based energy minimization model provides denoising with edge preservation in noisy digital images. We study a convergent finite difference scheme based on continuous piecewise linear functions and use a variable splitting scheme, n…
▽ More
We study an adaptive anisotropic Huber functional based image restoration scheme. By using a combination of L2-L1 regularization functions, an adaptive Huber functional based energy minimization model provides denoising with edge preservation in noisy digital images. We study a convergent finite difference scheme based on continuous piecewise linear functions and use a variable splitting scheme, namely the Split Bregman, to obtain the discrete minimizer. Experimental results are given in image denoising and comparison with additive operator splitting, dual fixed point, and projected gradient schemes illustrate that the best convergence rates are obtained for our algorithm.
△ Less
Submitted 16 September, 2013;
originally announced October 2013.
-
Robust Periocular Recognition By Fusing Sparse Representations of Color and Geometry Information
Authors:
Juan C. Moreno,
V. B. S. Prasath,
Gil Santos,
Hugo Proenca
Abstract:
In this paper, we propose a re-weighted elastic net (REN) model for biometric recognition. The new model is applied to data separated into geometric and color spatial components. The geometric information is extracted using a fast cartoon - texture decomposition model based on a dual formulation of the total variation norm allowing us to carry information about the overall geometry of images. Colo…
▽ More
In this paper, we propose a re-weighted elastic net (REN) model for biometric recognition. The new model is applied to data separated into geometric and color spatial components. The geometric information is extracted using a fast cartoon - texture decomposition model based on a dual formulation of the total variation norm allowing us to carry information about the overall geometry of images. Color components are defined using linear and nonlinear color spaces, namely the red-green-blue (RGB), chromaticity-brightness (CB) and hue-saturation-value (HSV). Next, according to a Bayesian fusion-scheme, sparse representations for classification purposes are obtained. The scheme is numerically solved using a gradient projection (GP) algorithm. In the empirical validation of the proposed model, we have chosen the periocular region, which is an emerging trait known for its robustness against low quality data. Our results were obtained in the publicly available UBIRIS.v2 data set and show consistent improvements in recognition effectiveness when compared to related state-of-the-art techniques.
△ Less
Submitted 11 September, 2013;
originally announced September 2013.
-
Brain MRI Segmentation with Fast and Globally Convex Multiphase Active Contours
Authors:
Juan C. Moreno,
V. B. S. Prasath,
Hugo Proenca,
K. Palaniappan
Abstract:
Multiphase active contour based models are useful in identifying multiple regions with different characteristics such as the mean values of regions. This is relevant in brain magnetic resonance images (MRIs), allowing the differentiation of white matter against gray matter. We consider a well defined globally convex formulation of Vese and Chan multiphase active contour model for segmenting brain…
▽ More
Multiphase active contour based models are useful in identifying multiple regions with different characteristics such as the mean values of regions. This is relevant in brain magnetic resonance images (MRIs), allowing the differentiation of white matter against gray matter. We consider a well defined globally convex formulation of Vese and Chan multiphase active contour model for segmenting brain MRI images. A well-established theory and an efficient dual minimization scheme are thoroughly described which guarantees optimal solutions and provides stable segmentations. Moreover, under the dual minimization implementation our model perfectly describes disjoint regions by avoiding local minima solutions. Experimental results indicate that the proposed approach provides better accuracy than other related multiphase active contour algorithms even under severe noise, intensity inhomogeneities, and partial volume effects.
△ Less
Submitted 28 August, 2013;
originally announced August 2013.
-
Color image denoising by chromatic edges based vector valued diffusion
Authors:
V. B. Surya Prasath,
Juan C. Moreno,
K. Palaniappan
Abstract:
In this letter we propose to denoise digital color images via an improved geometric diffusion scheme. By introducing edges detected from all three color channels into the diffusion the proposed scheme avoids color smearing artifacts. Vector valued diffusion is used to control the smoothing and the geometry of color images are taken into consideration. Color edge strength function computed from dif…
▽ More
In this letter we propose to denoise digital color images via an improved geometric diffusion scheme. By introducing edges detected from all three color channels into the diffusion the proposed scheme avoids color smearing artifacts. Vector valued diffusion is used to control the smoothing and the geometry of color images are taken into consideration. Color edge strength function computed from different planes is introduced and it stops the diffusion spread across chromatic edges. Experimental results indicate that the scheme achieves good denoising with edge preservation when compared to other related schemes.
△ Less
Submitted 15 May, 2013; v1 submitted 20 April, 2013;
originally announced April 2013.
