-
Waveform Optimization for Radio-Frequency Wireless Power Transfer
Authors:
Mohammad R. Vedady Moghadam,
Yong Zeng,
Rui Zhang
Abstract:
In this paper, we study the waveform design problem for a single-input single-output (SISO) radio-frequency (RF) wireless power transfer (WPT) system in frequency-selective channels. First, based on the actual non-linear current-voltage model of the diode at the energy receiver, we derive a semi-closed-form expression for the deliverable DC voltage in terms of the incident RF signal and hence obta…
▽ More
In this paper, we study the waveform design problem for a single-input single-output (SISO) radio-frequency (RF) wireless power transfer (WPT) system in frequency-selective channels. First, based on the actual non-linear current-voltage model of the diode at the energy receiver, we derive a semi-closed-form expression for the deliverable DC voltage in terms of the incident RF signal and hence obtain the average harvested power. Next, by adopting a multisine waveform structure for the transmit signal of the energy transmitter, we jointly design the multisine signal amplitudes and phases overall frequency tones according to the channel state information (CSI) to maximize the deliverable DC voltage or harvested power. Although our formulated problem is non-convex and difficult to solve, we propose two suboptimal solutions to it, based on the frequency-domain maximal ratio transmission (MRT) principle and the sequential convex optimization (SCP) technique, respectively. Using various simulations, the performance gain of our solutions over the existing waveform designs is shown.
△ Less
Submitted 26 March, 2017; v1 submitted 11 March, 2017;
originally announced March 2017.
-
Magnetic MIMO Signal Processing and Optimization for Wireless Power Transfer
Authors:
Gang Yang,
Mohammad R. Vedady Moghadam,
Rui Zhang
Abstract:
In magnetic resonant coupling (MRC) enabled multiple-input multiple-output (MIMO) wireless power transfer (WPT) systems, multiple transmitters (TXs) each with one single coil are used to enhance the efficiency of simultaneous power transfer to multiple single-coil receivers (RXs) by constructively combining their induced magnetic fields at the RXs, a technique termed "magnetic beamforming". In thi…
▽ More
In magnetic resonant coupling (MRC) enabled multiple-input multiple-output (MIMO) wireless power transfer (WPT) systems, multiple transmitters (TXs) each with one single coil are used to enhance the efficiency of simultaneous power transfer to multiple single-coil receivers (RXs) by constructively combining their induced magnetic fields at the RXs, a technique termed "magnetic beamforming". In this paper, we study the optimal magnetic beamforming design in a multi-user MIMO MRC-WPT system. We introduce the multi-user power region that constitutes all the achievable power tuples for all RXs, subject to the given total power constraint over all TXs as well as their individual peak voltage and current constraints. We characterize each boundary point of the power region by maximizing the sum-power deliverable to all RXs subject to their minimum harvested power constraints. For the special case without the TX peak voltage and current constraints, we derive the optimal TX current allocation for the single-RX setup in closed-form as well as that for the multi-RX setup. In general, the problem is a non-convex quadratically constrained quadratic programming (QCQP), which is difficult to solve. For the case of one single RX, we show that the semidefinite relaxation (SDR) of the problem is tight. For the general case with multiple RXs, based on SDR we obtain two approximate solutions by applying time-sharing and randomization, respectively. Moreover, for practical implementation of magnetic beamforming, we propose a novel signal processing method to estimate the magnetic MIMO channel due to the mutual inductances between TXs and RXs. Numerical results show that our proposed magnetic channel estimation and adaptive beamforming schemes are practically effective, and can significantly improve the power transfer efficiency and multi-user performance trade-off in MIMO MRC-WPT systems.
△ Less
Submitted 17 February, 2017;
originally announced February 2017.
-
Magnetic Beamforming for Wireless Power Transfer
Authors:
Gang Yang,
Mohammad R. Vedady Moghadam,
Rui Zhang
Abstract:
Magnetic resonant coupling (MRC) is an efficient method for realizing the near-field wireless power transfer (WPT). The use of multiple transmitters (TXs) each with one coil can be applied to enhance the WPT performance by focusing the magnetic fields from all TX coils in a beam toward the receiver (RX) coil, termed as "magnetic beamforming". In this paper, we study the optimal magnetic beamformin…
▽ More
Magnetic resonant coupling (MRC) is an efficient method for realizing the near-field wireless power transfer (WPT). The use of multiple transmitters (TXs) each with one coil can be applied to enhance the WPT performance by focusing the magnetic fields from all TX coils in a beam toward the receiver (RX) coil, termed as "magnetic beamforming". In this paper, we study the optimal magnetic beamforming for an MRC-WPT system with multiple TXs and a single RX. We formulate an optimization problem to jointly design the currents flowing through different TXs so as to minimize the total power drawn from their voltage sources, subject to the minimum power required by the RX load as well as the TXs' constraints on the peak voltage and current. For the special case of identical TX resistances and neglecting all TXs' constraints on the peak voltage and current, we show that the optimal current magnitude of each TX is proportional to the mutual inductance between its TX coil and the RX coil. In general, the problem is a non-convex quadratically constrained quadratic programming (QCQP) problem, which is reformulated as a semidefinite programming (SDP) problem. We show that its semidefinite relaxation (SDR) is tight. Numerical results show that magnetic beamforming significantly enhances the deliverable power as well as the WPT efficiency over the uncoordinated benchmark scheme of equal current allocation.
△ Less
Submitted 23 September, 2015; v1 submitted 22 September, 2015;
originally announced September 2015.
