Showing 1–50 of 66 results for author: Lopez, O

Federated Learning-Distillation Alternation for Resource-Constrained IoT

Authors: Rafael Valente da Silva, Onel L. Alcaraz López, Richard Demo Souza

Abstract: Federated learning (FL) faces significant challenges in Internet of Things (IoT) networks due to device limitations in energy and communication resources, especially when considering the large size of FL models. From an energy perspective, the challenge is aggravated if devices rely on energy harvesting (EH), as energy availability can vary significantly over time, influencing the average number o… ▽ More Federated learning (FL) faces significant challenges in Internet of Things (IoT) networks due to device limitations in energy and communication resources, especially when considering the large size of FL models. From an energy perspective, the challenge is aggravated if devices rely on energy harvesting (EH), as energy availability can vary significantly over time, influencing the average number of participating users in each iteration. Additionally, the transmission of large model updates is more susceptible to interference from uncorrelated background traffic in shared wireless environments. As an alternative, federated distillation (FD) reduces communication overhead and energy consumption by transmitting local model outputs, which are typically much smaller than the entire model used in FL. However, this comes at the cost of reduced model accuracy. Therefore, in this paper, we propose FL-distillation alternation (FLDA). In FLDA, devices alternate between FD and FL phases, balancing model information with lower communication overhead and energy consumption per iteration. We consider a multichannel slotted-ALOHA EH-IoT network subject to background traffic/interference. In such a scenario, FLDA demonstrates higher model accuracy than both FL and FD, and achieves faster convergence than FL. Moreover, FLDA achieves target accuracies saving up to 98% in energy consumption, while also being less sensitive to interference, both relative to FL. △ Less

Submitted 26 May, 2025; originally announced May 2025.

Dimensioning and Optimization of Reliability Coverage in Local 6G Networks

Authors: Jacek Kibiłda, Dian Echevarría Pérez, André Gomes, Onel L. Alcaraz López, Arthur S. de Sena, Nurul Huda Mahmood, Hirley Alves

Abstract: Enabling vertical use cases for the sixth generation (6G) wireless networks, such as automated manufacturing, immersive extended reality (XR), and self-driving fleets, will require network designs that meet reliability and latency targets in well-defined service areas. In order to establish a quantifiable design objective, we introduce the novel concept of reliability coverage, defined as the perc… ▽ More Enabling vertical use cases for the sixth generation (6G) wireless networks, such as automated manufacturing, immersive extended reality (XR), and self-driving fleets, will require network designs that meet reliability and latency targets in well-defined service areas. In order to establish a quantifiable design objective, we introduce the novel concept of reliability coverage, defined as the percentage area covered by communication services operating under well-defined reliability and performance targets. Reliability coverage allows us to unify the different network design tasks occurring at different time scales, namely resource orchestration and allocation, resulting in a single framework for dimensioning and optimization in local 6G networks. The two time scales, when considered together, yield remarkably consistent results and allow us to observe how stringent reliability/latency requirements translate into the increased wireless network resource demands. △ Less

Submitted 14 May, 2025; originally announced May 2025.

Comments: Submitted to IEEE Network

Energy and Age-Aware MAC for Low-Power Massive IoT

Authors: Ophelia Giannini, Gabriel Martins de Jesus, Roberto Verdone, Onel Alcaraz López

Abstract: Efficient multiple access remains a key challenge for emerging Internet of Things (IoT) networks comprising a large set of devices with sporadic activation, thus motivating significant research in the last few years. In this paper, we consider a network wherein IoT sensors capable of energy harvesting (EH) send updates to a central server to monitor the status of the environment or machinery in wh… ▽ More Efficient multiple access remains a key challenge for emerging Internet of Things (IoT) networks comprising a large set of devices with sporadic activation, thus motivating significant research in the last few years. In this paper, we consider a network wherein IoT sensors capable of energy harvesting (EH) send updates to a central server to monitor the status of the environment or machinery in which they are located. We develop energy-aware ALOHA-like multiple access schemes for such a scenario using the Age of Information (AoI) metric to quantify the freshness of an information packet. The goal is to minimize the average AoI across the entire system while adhering to energy constraints imposed by the EH process. Simulation results show that applying the designed multiple access scheme improves performance from 24% up to 90% compared to previously proposed age-dependent protocols by ensuring low average AoI and achieving scalability while simultaneously complying with the energy constraints considered. △ Less

Submitted 12 February, 2025; originally announced February 2025.

Comments: 6 pages, 7 figures. Paper accepted for presentation at the IEEE International Conference on Communications (ICC), Montreal, Canada, 2025

On the Spectral Efficiency of D-MIMO Networks under Rician Fading

Authors: Eduardo Noboro Tominaga, Onel Luis Alcaraz López, Tommy Svensson, Richard Demo Souza, Hirley Alves

Abstract: Contemporary wireless communications systems adopt the Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique: a single base station or Access Point (AP) equipped with multiple antenna elements serves multiple active users simultaneously. Aiming at providing a more uniform wireless coverage, industry and academia have been working towards the evolution from centralized MIMO to Distributed-M… ▽ More Contemporary wireless communications systems adopt the Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique: a single base station or Access Point (AP) equipped with multiple antenna elements serves multiple active users simultaneously. Aiming at providing a more uniform wireless coverage, industry and academia have been working towards the evolution from centralized MIMO to Distributed-MIMO. That is, instead of having all the antenna elements co-located at a single AP, multiple APs, each equipped with a few or a single antenna element, jointly cooperate to serve the active users in the coverage area. In this work, we evaluate the performance of different D-MIMO setups under Rician fading, and considering different receive combining schemes. Note that the Rician fading model is convenient for MU-MIMO performance assessment, as it encompasses a wide variety of scenarios. Our numerical results show that the correlation among the channel vectors of different users increases with the Rician factor, which leads to a reduction on the achievable Spectral Efficiency (SE). Moreover, given a total number of antenna elements, there is an optimal number of APs and antenna elements per AP that provides the best performance. This "sweet spot" depends on the Rician factor and on the adopted receive combining scheme. △ Less

Submitted 23 September, 2024; originally announced October 2024.

Comments: 6 pages, 6 figures. Manuscript submitted to the IEEE Wireless Communications and Networking Conference (WCNC), Milan, Italy, 2025. arXiv admin note: text overlap with arXiv:2406.19078

Modeling IoT Traffic Patterns: Insights from a Statistical Analysis of an MTC Dataset

Authors: David E. Ruiz-Guirola, Onel L. A. Løpez, Samuel Montejo-Sanchez

Abstract: The Internet-of-Things (IoT) is rapidly expanding, connecting numerous devices and becoming integral to our daily lives. As this occurs, ensuring efficient traffic management becomes crucial. Effective IoT traffic management requires modeling and predicting intrincate machine-type communication (MTC) dynamics, for which machine-learning (ML) techniques are certainly appealing. However, obtaining c… ▽ More The Internet-of-Things (IoT) is rapidly expanding, connecting numerous devices and becoming integral to our daily lives. As this occurs, ensuring efficient traffic management becomes crucial. Effective IoT traffic management requires modeling and predicting intrincate machine-type communication (MTC) dynamics, for which machine-learning (ML) techniques are certainly appealing. However, obtaining comprehensive and high-quality datasets, along with accessible platforms for reproducing ML-based predictions, continues to impede the research progress. In this paper, we aim to fill this gap by characterizing the Smart Campus MTC dataset provided by the University of Oulu. Specifically, we perform a comprehensive statistical analysis of the MTC traffic utilizing goodness-of-fit tests, including well-established tests such as Kolmogorov-Smirnov, Anderson-Darling, chi-squared, and root mean square error. The analysis centers on examining and evaluating three models that accurately represent the two most significant MTC traffic types: periodic updating and event-driven, which are also identified from the dataset. The results demonstrate that the models accurately characterize the traffic patterns. The Poisson point process model exhibits the best fit for event-driven patterns with errors below 11%, while the quasi-periodic model fits accurately the periodic updating traffic with errors below 7%. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Comments: SSRN:4655476

Simple and Nearly-Optimal Sampling for Rank-1 Tensor Completion via Gauss-Jordan

Authors: Alejandro Gomez-Leos, Oscar López

Abstract: We revisit the sample and computational complexity of completing a rank-1 tensor in $\otimes_{i=1}^{N} \mathbb{R}^{d}$, given a uniformly sampled subset of its entries. We present a characterization of the problem (i.e. nonzero entries) which admits an algorithm amounting to Gauss-Jordan on a pair of random linear systems. For example, when $N = Θ(1)$, we prove it uses no more than… ▽ More We revisit the sample and computational complexity of completing a rank-1 tensor in $\otimes_{i=1}^{N} \mathbb{R}^{d}$, given a uniformly sampled subset of its entries. We present a characterization of the problem (i.e. nonzero entries) which admits an algorithm amounting to Gauss-Jordan on a pair of random linear systems. For example, when $N = Θ(1)$, we prove it uses no more than $m = O(d^2 \log d)$ samples and runs in $O(md^2)$ time. Moreover, we show any algorithm requires $Ω(d\log d)$ samples. By contrast, existing upper bounds on the sample complexity are at least as large as $d^{1.5} μ^{Ω(1)} \log^{Ω(1)} d$, where $μ$ can be $Θ(d)$ in the worst case. Prior work obtained these looser guarantees in higher rank versions of our problem, and tend to involve more complicated algorithms. △ Less

Submitted 19 August, 2024; v1 submitted 10 August, 2024; originally announced August 2024.

Comments: 16 pages; corrected typos in Prior Work section & Theorem 1.5

Neural Network-Based Bandit: A Medium Access Control for the IIoT Alarm Scenario

Authors: Prasoon Raghuwanshi, Onel Luis Alcaraz López, Neelesh B. Mehta, Hirley Alves, Matti Latva-aho

Abstract: Efficient Random Access (RA) is critical for enabling reliable communication in Industrial Internet of Things (IIoT) networks. Herein, we propose a deep reinforcement learning based distributed RA scheme, entitled Neural Network-Based Bandit (NNBB), for the IIoT alarm scenario. In such a scenario, the devices may detect a common critical event, and the goal is to ensure the alarm information is de… ▽ More Efficient Random Access (RA) is critical for enabling reliable communication in Industrial Internet of Things (IIoT) networks. Herein, we propose a deep reinforcement learning based distributed RA scheme, entitled Neural Network-Based Bandit (NNBB), for the IIoT alarm scenario. In such a scenario, the devices may detect a common critical event, and the goal is to ensure the alarm information is delivered successfully from at least one device. The proposed NNBB scheme is implemented at each device, where it trains itself online and establishes implicit inter-device coordination to achieve the common goal. Devices can transmit simultaneously on multiple orthogonal channels and each possible transmission pattern constitutes a possible action for the NNBB, which uses a deep neural network to determine the action. Our simulation results show that as the number of devices in the network increases, so does the performance gain of the NNBB compared to the Multi-Armed Bandit (MAB) RA benchmark. For instance, NNBB experiences a 7% success rate drop when there are four channels and the number of devices increases from 10 to 60, while MAB faces a 25% drop. △ Less

Submitted 22 November, 2024; v1 submitted 23 July, 2024; originally announced July 2024.

Intelligent Duty Cycling Management and Wake-up for Energy Harvesting IoT Networks with Correlated Activity

Authors: David E. Ruíz-Guirola, Onel L. A. López, Samuel Montejo-Sánchez, Israel Leyva Mayorga, Zhu Han, Petar Popovski

Abstract: This paper presents an approach for energy-neutral Internet of Things (IoT) scenarios where the IoT devices (IoTDs) rely entirely on their energy harvesting capabilities to sustain operation. We use a Markov chain to represent the operation and transmission states of the IoTDs, a modulated Poisson process to model their energy harvesting process, and a discrete-time Markov chain to model their bat… ▽ More This paper presents an approach for energy-neutral Internet of Things (IoT) scenarios where the IoT devices (IoTDs) rely entirely on their energy harvesting capabilities to sustain operation. We use a Markov chain to represent the operation and transmission states of the IoTDs, a modulated Poisson process to model their energy harvesting process, and a discrete-time Markov chain to model their battery state. The aim is to efficiently manage the duty cycling of the IoTDs, so as to prolong their battery life and reduce instances of low-energy availability. We propose a duty-cycling management based on K- nearest neighbors, aiming to strike a trade-off between energy efficiency and detection accuracy. This is done by incorporating spatial and temporal correlations among IoTDs' activity, as well as their energy harvesting capabilities. We also allow the base station to wake up specific IoTDs if more information about an event is needed upon initial detection. Our proposed scheme shows significant improvements in energy savings and performance, with up to 11 times lower misdetection probability and 50\% lower energy consumption for high-density scenarios compared to a random duty cycling benchmark. △ Less

Submitted 10 May, 2024; originally announced May 2024.

The Average Spectrum Norm and Near-Optimal Tensor Completion

Authors: Oscar López, Richard Lehoucq, Carlos Llosa-Vite, Arvind Prasadan, Daniel M. Dunlavy

Abstract: We introduce a new tensor norm, the average spectrum norm, to study sample complexity of tensor completion problems based on the canonical polyadic decomposition (CPD). Properties of the average spectrum norm and its dual norm are investigated, demonstrating their utility for low-rank tensor recovery analysis. Our novel approach significantly reduces the provable sample rate for CPD-based noisy te… ▽ More We introduce a new tensor norm, the average spectrum norm, to study sample complexity of tensor completion problems based on the canonical polyadic decomposition (CPD). Properties of the average spectrum norm and its dual norm are investigated, demonstrating their utility for low-rank tensor recovery analysis. Our novel approach significantly reduces the provable sample rate for CPD-based noisy tensor completion, providing the best bounds to date on the number of observed noisy entries required to produce an arbitrarily accurate estimate of an underlying mean value tensor. Under Poisson and Bernoulli multivariate distributions, we show that an $N$-way CPD rank-$R$ parametric tensor $\boldsymbol{\mathscr{M}}\in\mathbb{R}^{I\times \cdots\times I}$ generating noisy observations can be approximated by large likelihood estimators from $\mathcal{O}(IR^2\log^{N+2}(I))$ revealed entries. Furthermore, under nonnegative and orthogonal versions of the CPD we improve the result to depend linearly on the rank, achieving the near-optimal rate $\mathcal{O}(IR\log^{N+2}(I))$. △ Less

Submitted 17 June, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: Error, in Section 2.1.2

EVT-enriched Radio Maps for URLLC

Authors: Dian Echevarría Pérez, Onel L. Alcaraz López, Hirley Alves

Abstract: This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at u… ▽ More This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at unobserved locations. This innovative method offers a versatile solution adaptable to various resource allocation challenges in ultra-reliable low-latency communications. We evaluate the performance of this method in a rate maximisation problem with defined outage constraints and compare it with a benchmark in the literature. Notably, the proposed approach meets the outage demands in a larger percentage of the coverage area and reaches higher transmission rates. △ Less

Submitted 6 April, 2024; originally announced April 2024.

Comments: 8 pages, 11 figures, submitted to IEEE Transactions on Wireless Communications

Assessment of the Sparsity-Diversity Trade-offs in Active Users Detection for mMTC with the Orthogonal Matching Pursuit

Authors: Gabriel Martins de Jesus, Onel Luis Alcaraz Lopez, Richard Demo Souza, Nurul Huda Mahmood, Markku Juntti, Matti Latva-Aho

Abstract: Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsi… ▽ More Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsity in the AUD problem. Single-antenna users transmit multiple copies of non-orthogonal pilots across multiple frequency channels and the base station independently performs AUD in each channel using the orthogonal matching pursuit algorithm. We note that, although frequency diversity may improve the likelihood of successful reception of the signals, it may also damage the channel sparsity level, leading to important trade-offs. We show that a sparser signal significantly benefits AUD, surpassing the advantages brought by frequency diversity in scenarios with limited temporal resources and/or high numbers of receive antennas. Conversely, with longer pilots and fewer receive antennas, investing in frequency diversity becomes more impactful, resulting in a tenfold AUD performance improvement. △ Less

Submitted 12 February, 2025; v1 submitted 8 February, 2024; originally announced February 2024.

Comments: 6 pages, 6 figures. Paper presented at the IEEE Global Communications Conference (GLOBECOM), Cape Town, South Africa, 2024

On the Spectral Efficiency of Indoor Wireless Networks with a Rotary Uniform Linear Array

Authors: Eduardo Noboro Tominaga, Onel Luis Alcaraz López, Tommy Svensson, Richard Demo Souza, Hirley Alves

Abstract: Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained… ▽ More Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained traction among the research community. By moving in a confined region, movable antennas are able to exploit the wireless channel variation in the continuous domain. This additional degree of freedom may enhance the quality of the wireless links, and consequently the communication performance. However, movable antennas for MU-MIMO proposed in the literature are complex, bulky, expensive and present a high power consumption. In this paper, we propose an alternative to such systems that has lower complexity and lower cost. More specifically, we propose the incorporation of rotation capabilities to APs equipped with Uniform Linear Arrays (ULAs) of antennas. We consider the uplink of an indoor scenario where the AP serves multiple devices simultaneously. The optimal rotation of the ULA is computed based on estimates of the positions of the active devices and aiming at maximizing the per-user mean achievable Spectral Efficiency (SE). Adopting a spatially correlated Rician channel model, our numerical results show that the rotation capabilities of the AP can bring substantial improvements in the SE in scenarios where the line-of-sight component of the channel vectors is strong. Moreover, our proposed system is robust against imperfect positioning estimates. △ Less

Submitted 23 December, 2024; v1 submitted 8 February, 2024; originally announced February 2024.

Comments: 6 pages, 7 figures. Manuscript accepted for presentation at IEEE Wireless Communications and Networking Conference (WCNC), Milan, Italy, 2025

EchoWrist: Continuous Hand Pose Tracking and Hand-Object Interaction Recognition Using Low-Power Active Acoustic Sensing On a Wristband

Authors: Chi-Jung Lee, Ruidong Zhang, Devansh Agarwal, Tianhong Catherine Yu, Vipin Gunda, Oliver Lopez, James Kim, Sicheng Yin, Boao Dong, Ke Li, Mose Sakashita, Francois Guimbretiere, Cheng Zhang

Abstract: Our hands serve as a fundamental means of interaction with the world around us. Therefore, understanding hand poses and interaction context is critical for human-computer interaction. We present EchoWrist, a low-power wristband that continuously estimates 3D hand pose and recognizes hand-object interactions using active acoustic sensing. EchoWrist is equipped with two speakers emitting inaudible s… ▽ More Our hands serve as a fundamental means of interaction with the world around us. Therefore, understanding hand poses and interaction context is critical for human-computer interaction. We present EchoWrist, a low-power wristband that continuously estimates 3D hand pose and recognizes hand-object interactions using active acoustic sensing. EchoWrist is equipped with two speakers emitting inaudible sound waves toward the hand. These sound waves interact with the hand and its surroundings through reflections and diffractions, carrying rich information about the hand's shape and the objects it interacts with. The information captured by the two microphones goes through a deep learning inference system that recovers hand poses and identifies various everyday hand activities. Results from the two 12-participant user studies show that EchoWrist is effective and efficient at tracking 3D hand poses and recognizing hand-object interactions. Operating at 57.9mW, EchoWrist is able to continuously reconstruct 20 3D hand joints with MJEDE of 4.81mm and recognize 12 naturalistic hand-object interactions with 97.6% accuracy. △ Less

Submitted 29 March, 2024; v1 submitted 30 January, 2024; originally announced January 2024.

Channel Scheduling for IoT Access with Spatial Correlation

Authors: Prasoon Raghuwanshi, Onel Luis Alcaraz López, Petar Popovski, Matti Latva-aho

Abstract: Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among de… ▽ More Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among devices. This formulation allows the devices to stochastically select the transmit channels, thus, leading to a soft-clustering approach. We prove that the optimal QP solution can only be attained when it is transformed into a hard-clustering problem, leading to a pure integer QP, which we transform into a pure integer linear program (PILP). We leverage the branch-and-cut (B&C) algorithm to solve PILP optimally. Due to the high computational cost of B&C, we resort to some sub-optimal clustering methods with low computational costs to tackle the clustering problem in CS. Our findings demonstrate that the CS strategy, sourced from B&C, significantly outperforms those derived from sub-optimal clustering methods, even amidst increased device correlation. △ Less

Submitted 17 November, 2023; originally announced December 2023.

High-Power and Safe RF Wireless Charging: Cautious Deployment and Operation

Authors: Onel L. A. López, Osmel M. Rosabal, Amirhossein Azarbahram, A. Basit Khattak, Mehdi Monemi, Richard D. Souza, Petar Popovski, Matti Latva-aho

Abstract: The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT… ▽ More The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT implementation and operation require efficient and cautious strategies and protocols, especially when targeting high-power charging, which constitutes the scope of this work. Herein, we overview the main factors affecting the end-to-end PTE of RF-WPT systems and their multiplicative effect and interdependencies. Moreover, we discuss key electromagnetic field (EMF) exposure metrics, safety limits, and approaches for efficient and EMF-aware deployment and operation. Quantitatively, we show that near-field RF charging may significantly reduce EMF exposure, and thus must be promoted. We also present our vision of a cyber-physical system for efficient and safe wireless charging, specify key components and their interrelation, and illustrate numerically the PTE attained by two modern low-power multi-antenna architectures in a simple setup. Throughout the paper, we highlight the need for high end-to-end PTE architectures and charging protocols transparently complying with EMF exposure regulations and outline relevant challenges and research directions. This work expands the vision and understanding of modern RF-WPT technology and constitutes a step towards making the technology attractive for worldwide commercial exploitation. △ Less

Submitted 20 September, 2023; originally announced November 2023.

Comments: 8 pages, 5 figures, 1 table

ACM Class: C.2.1; C.2.m; C.3; J.2; J.m

Energy-Aware Federated Learning with Distributed User Sampling and Multichannel ALOHA

Authors: Rafael Valente da Silva, Onel L. Alcaraz López, Richard Demo Souza

Abstract: Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained… ▽ More Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained model. To solve these problems, this letter considers the integration of energy harvesting (EH) devices into a FL network with multi-channel ALOHA, while proposing a method to ensure both low energy outage probability and successful execution of future tasks. Numerical results demonstrate the effectiveness of this method, particularly in critical setups where the average energy income fails to cover the iteration cost. The method outperforms a norm based solution in terms of convergence time and battery level. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Extreme Value Theory-based Robust Minimum-Power Precoding for URLLC

Authors: Dian Echevarría Pérez, Onel L. Alcaraz López, Hirley Alves

Abstract: Channel state information (CSI) is crucial for achieving ultra-reliable low-latency communication (URLLC) in wireless networks. The main associated problems are the CSI acquisition time, which impacts the delay requirements of time-critical applications, and the estimation accuracy, which degrades the signal-to-interference-plus-noise ratio (SINR), thus, reducing reliability. In this work, we form… ▽ More Channel state information (CSI) is crucial for achieving ultra-reliable low-latency communication (URLLC) in wireless networks. The main associated problems are the CSI acquisition time, which impacts the delay requirements of time-critical applications, and the estimation accuracy, which degrades the signal-to-interference-plus-noise ratio (SINR), thus, reducing reliability. In this work, we formulate and solve a minimum-power precoding design problem simultaneously serving multiple URLLC users in the downlink with imperfect CSI availability. Specifically, we develop an algorithm that exploits state-of-the-art precoding schemes such as the maximal ratio transmission (MRT) and zero-forcing (ZF), and adjust the power of the precoders to compensate for the channel estimation error uncertainty based on the extreme value theory (EVT) framework. Finally, we evaluate the performance of our method and show its superiority concerning worst-case robust precoding, which is used as a benchmark. △ Less

Submitted 9 August, 2023; originally announced August 2023.

Comments: 11 pages, 9 figures, submitted to TWC

Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges

Authors: Osmel Martínez Rosabal, Onel L. Alcaraz López, Hirley Alves, Matti Latva-aho

Abstract: Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which c… ▽ More Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions. △ Less

Submitted 9 November, 2023; v1 submitted 26 June, 2023; originally announced June 2023.

Comments: 17 pages, 7 figures, 2 tables, submitted to IEEE Access Journal

Spectral gap-based deterministic tensor completion

Authors: Kameron Decker Harris, Oscar López, Angus Read, Yizhe Zhu

Abstract: Tensor completion is a core machine learning algorithm used in recommender systems and other domains with missing data. While the matrix case is well-understood, theoretical results for tensor problems are limited, particularly when the sampling patterns are deterministic. Here we bound the generalization error of the solutions of two tensor completion methods, Poisson loss and atomic norm minimiz… ▽ More Tensor completion is a core machine learning algorithm used in recommender systems and other domains with missing data. While the matrix case is well-understood, theoretical results for tensor problems are limited, particularly when the sampling patterns are deterministic. Here we bound the generalization error of the solutions of two tensor completion methods, Poisson loss and atomic norm minimization, providing tighter bounds in terms of the target tensor rank. If the ground-truth tensor is order $t$ with CP-rank $r$, the dependence on $r$ is improved from $r^{2(t-1)(t^2-t-1)}$ in arXiv:1910.10692 to $r^{2(t-1)(3t-5)}$. The error in our bounds is deterministically controlled by the spectral gap of the sampling sparsity pattern. We also prove several new properties for the atomic tensor norm, reducing the rank dependence from $r^{3t-3}$ in arXiv:1711.04965 to $r^{3t-5}$ under random sampling schemes. A limitation is that atomic norm minimization, while theoretically interesting, leads to inefficient algorithms. However, numerical experiments illustrate the dependence of the reconstruction error on the spectral gap for the practical max-quasinorm, ridge penalty, and Poisson loss minimization algorithms. This view through the spectral gap is a promising window for further study of tensor algorithms. △ Less

Submitted 9 June, 2023; originally announced June 2023.

Comments: In proceedings of SampTA 2023

Energy-Sustainable IoT Connectivity: Vision, Technological Enablers, Challenges, and Future Directions

Authors: Onel A. López, Osmel M. Rosabal, David Ruiz-Guirola, Prasoon Raghuwanshi, Konstantin Mikhaylov, Lauri Lovén, Sridhar Iyer

Abstract: Technology solutions must effectively balance economic growth, social equity, and environmental integrity to achieve a sustainable society. Notably, although the Internet of Things (IoT) paradigm constitutes a key sustainability enabler, critical issues such as the increasing maintenance operations, energy consumption, and manufacturing/disposal of IoT devices have long-term negative economic, soc… ▽ More Technology solutions must effectively balance economic growth, social equity, and environmental integrity to achieve a sustainable society. Notably, although the Internet of Things (IoT) paradigm constitutes a key sustainability enabler, critical issues such as the increasing maintenance operations, energy consumption, and manufacturing/disposal of IoT devices have long-term negative economic, societal, and environmental impacts and must be efficiently addressed. This calls for self-sustainable IoT ecosystems requiring minimal external resources and intervention, effectively utilizing renewable energy sources, and recycling materials whenever possible, thus encompassing energy sustainability. In this work, we focus on energy-sustainable IoT during the operation phase, although our discussions sometimes extend to other sustainability aspects and IoT lifecycle phases. Specifically, we provide a fresh look at energy-sustainable IoT and identify energy provision, transfer, and energy efficiency as the three main energy-related processes whose harmonious coexistence pushes toward realizing self-sustainable IoT systems. Their main related technologies, recent advances, challenges, and research directions are also discussed. Moreover, we overview relevant performance metrics to assess the energy-sustainability potential of a certain technique, technology, device, or network and list some target values for the next generation of wireless systems. Overall, this paper offers insights that are valuable for advancing sustainability goals for present and future generations. △ Less

Submitted 27 October, 2023; v1 submitted 4 June, 2023; originally announced June 2023.

Comments: 25 figures, 12 tables, submitted to IEEE Open Journal of the Communications Society

MSC Class: 94-02; 68-02

On CSI-Free Multi-Antenna Schemes for Massive Wireless-Powered Underground Sensor Networks

Authors: Kaiqiang Lin, Onel Luis Alcaraz López, Hirley Alves, Tong Hao

Abstract: Radio-frequency wireless energy transfer (WET) is a promising technology to realize wireless-powered underground sensor networks (WPUSNs) and enable sustainable underground monitoring. However, due to the severe attenuation in harsh underground soil and the tight energy budget of the underground sensors, traditional WPUSNs relying on the channel state information (CSI) are highly inefficient, espe… ▽ More Radio-frequency wireless energy transfer (WET) is a promising technology to realize wireless-powered underground sensor networks (WPUSNs) and enable sustainable underground monitoring. However, due to the severe attenuation in harsh underground soil and the tight energy budget of the underground sensors, traditional WPUSNs relying on the channel state information (CSI) are highly inefficient, especially in massive WET scenarios. To address this challenge, we comparatively assess the feasibility of several state-of-the-art CSI-free multi-antenna WET schemes for WPUSNs, under a given power budget. Moreover, to overcome the extremely low WET efficiency in underground channels, we propose a distributed CSI-free system, where multiple power beacons (PBs) simultaneously charge a large set of underground sensors without any CSI. We consider the position-aware K-Means and the position-agnostic equally-far-from-center (EFFC) approaches for the optimal deployment of the PBs. Our results evince that the performance of the proposed distributed CSI-free system can approach or even surpass that of a traditional full-CSI WET strategy, especially when adopting an appropriate CSI-free scheme, applying the advisable PBs deployment approach, and equipping the PBs with an appropriate number of antennas. Finally, we discuss the impact of underground parameters, i.e., the burial depth of devices and the volumetric water content of soil, on the system's performance, and identify potential challenges and research opportunities for practical distributed CSI-free WPUSNs deployment. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Comments: 13 pages, 10 figures, paper accepted for publication in IEEE Internet of Things Journal

Age-of-Information Dependent Random Access in NOMA-Aided Multiple-Relay Slotted ALOHA

Authors: Gabriel Germino Martins de Jesus, João Luiz Rebelatto, Richard Demo Souza, Onel Luis Alcaraz López

Abstract: We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets se… ▽ More We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets sent by the users are potentially received by the relays, and then forwarded to a common sink in a NOMA fashion by randomly selecting one of the available power levels, and multiple packets are received if all selected levels are unique. We derive analytical expressions for the average AoI of AD-NOMA-MR. Through numerical and simulation results, we show that the proposed policy can improve the average AoI up to 76.6% when compared to a previously proposed AD Orthogonal Multiple Access MR policy. △ Less

Submitted 18 April, 2023; originally announced April 2023.

Comments: 6 pages, 5 figures. Paper accepted for presentation at the 2023 Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit), Gothenburg, Sweden, 2023

Journal ref: 2023 Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit), Gothenburg, Sweden, 2023, pp. 317-322

Performance Analysis of Centralized and Distributed Massive MIMO for MTC

Authors: Eduardo Noboro Tominaga, Onel Luiz Alcaraz López, Hirley Alves, Richard Demo Souza, Leonardo Terças

Abstract: Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and ac… ▽ More Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and academia are working on the evolution from conventional Centralized mMIMO (CmMIMO) to Distributed mMIMO (DmMIMO) architectures for the Sixth Generation (6G) of wireless networks. Under this new paradigm, several Access Points (APs) are distributed in the coverage area, and all jointly cooperate to serve the active devices. Aiming at Machine-Type Communication (MTC) use cases, we compare the performance of CmMIMO and different DmMIMO deployments in an indoor industrial scenario considering regular and alarm traffic patterns for MTC. Our simulation results show that DmMIMO's performance is often superior to CmMIMO. However, the traditional CmMIMO can outperform DmMIMO when the devices' channels are highly correlated. △ Less

Submitted 11 April, 2023; originally announced April 2023.

Comments: 6 pages, 8 figures. Paper accepted for presentation at the 2023 Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit), Gothenburg, Sweden, 2023

TinyML: Tools, Applications, Challenges, and Future Research Directions

Authors: Rakhee Kallimani, Krishna Pai, Prasoon Raghuwanshi, Sridhar Iyer, Onel L. A. López

Abstract: In recent years, Artificial Intelligence (AI) and Machine learning (ML) have gained significant interest from both, industry and academia. Notably, conventional ML techniques require enormous amounts of power to meet the desired accuracy, which has limited their use mainly to high-capability devices such as network nodes. However, with many advancements in technologies such as the Internet of Thin… ▽ More In recent years, Artificial Intelligence (AI) and Machine learning (ML) have gained significant interest from both, industry and academia. Notably, conventional ML techniques require enormous amounts of power to meet the desired accuracy, which has limited their use mainly to high-capability devices such as network nodes. However, with many advancements in technologies such as the Internet of Things (IoT) and edge computing, it is desirable to incorporate ML techniques into resource-constrained embedded devices for distributed and ubiquitous intelligence. This has motivated the emergence of the TinyML paradigm which is an embedded ML technique that enables ML applications on multiple cheap, resource- and power-constrained devices. However, during this transition towards appropriate implementation of the TinyML technology, multiple challenges such as processing capacity optimization, improved reliability, and maintenance of learning models' accuracy require timely solutions. In this article, various avenues available for TinyML implementation are reviewed. Firstly, a background of TinyML is provided, followed by detailed discussions on various tools supporting TinyML. Then, state-of-art applications of TinyML using advanced technologies are detailed. Lastly, various research challenges and future directions are identified. △ Less

Submitted 23 March, 2023; originally announced March 2023.

Comments: 12 pags, 3 tables, 4 figures

Journal ref: Multimedia Tools and Applications, 2023

Statistical Tools and Methodologies for Ultrareliable Low-Latency Communications -- A Tutorial

Authors: Onel López, Nurul Mahmood, Mohammad Shehab, Hirley Alves, Osmel Rosabal, Leatile Marata, Matti Latva-aho

Abstract: Ultra-reliable low-latency communication (URLLC) constitutes a key service class of the fifth generation and beyond cellular networks. Notably, designing and supporting URLLC poses a herculean task due to the fundamental need to identify and accurately characterize the underlying statistical models in which the system operates, e.g., interference statistics, channel conditions, and the behavior of… ▽ More Ultra-reliable low-latency communication (URLLC) constitutes a key service class of the fifth generation and beyond cellular networks. Notably, designing and supporting URLLC poses a herculean task due to the fundamental need to identify and accurately characterize the underlying statistical models in which the system operates, e.g., interference statistics, channel conditions, and the behavior of protocols. In general, multi-layer end-to-end approaches considering all the potential delay and error sources and proper statistical tools and methodologies are inevitably required for providing strong reliability and latency guarantees. This paper contributes to the body of knowledge in the latter aspect by providing a tutorial on several statistical tools and methodologies that are useful for designing and analyzing URLLC systems. Specifically, we overview the frameworks related to i) reliability theory, ii) short packet communications, iii) inequalities, distribution bounds, and tail approximations, iv) rare events simulation, vi) queuing theory and information freshness, and v) large-scale tools such as stochastic geometry, clustering, compressed sensing, and mean-field games. Moreover, we often refer to prominent data-driven algorithms within the scope of the discussed tools/methodologies. Throughout the paper, we briefly review the state-of-the-art works using the addressed tools and methodologies, and their link to URLLC systems. Moreover, we discuss novel application examples focused on physical and medium access control layers. Finally, key research challenges and directions are highlighted to elucidate how URLLC analysis/design research may evolve in the coming years. △ Less

Submitted 21 November, 2023; v1 submitted 27 October, 2022; originally announced December 2022.

Comments: Accepted in IEEE Proceedings of the IEEE. 40 pages, 20 figures, 11 tables

Journal ref: Proceedings of the IEEE, vol. 111, no. 11, pp. 1502-1543, Nov. 2023

Robust Downlink Multi-Antenna Beamforming with Heterogenous CSI: Enabling eMBB and URLLC Coexistence

Authors: Dian Echevarría Pérez, Onel L. Alcaraz López, Hirley Alves

Abstract: Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirem… ▽ More Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirements of different nodes sharing the same network resources. In this paper, we leverage the I-CSI of multiple eMBB links and the channel measurement's history of a URLLC user for multi-antenna beamforming design. Specifically, we propose a precoding design that minimizes the transmit power of a base station (BS) providing eMBB and URLLC services with signal-to-interference-plus-noise ratio (SINR) and outage constraints, respectively, by modifying existing I-CSI-based precoding schemes to account for URLLC channel history information. Moreover, we illustrate and validate the proposed method by adopting zero-forcing (ZF) and the transmit power minimization (TPM) precoding with SINR constraints. We show that the ZF implementation outperforms TPM in adverse channel conditions as in Rayleigh fading, while the situation is rapidly reversed as the channel experiences some line-of-sight (LOS). Finally, we determine the confidence levels at which the target outage probabilities are reached. For instance, we show that outage probabilities below $10^{-3}$ are achievable with more than 99$\%$ confidence for both precoding schemes under favorable LOS conditions with 16 transmit antennas and 500 samples of URLLC channel history. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Comments: 11 pages, 9 figures. Journal paper accepted for publication in IEEE Transactions on Wireless Communications

A Comprehensive Survey on Spectrum Sharing Techniques for 5G/B5G Intelligent Wireless Networks: Opportunities, Challenges and Future Research Directions

Authors: Anita Patil, Sridhar Iyer, Onel L. A. Lopez, Rahul J Pandya, Krishna Pai, Anshuman Kalla, Rakhee Kallimani

Abstract: The increasing popularity of Internet of Everything and small-cell devices has enormously accelerated traffic loads. Consequently, increased bandwidth and high data rate requirements stimulate the operation at the millimeter wave and the Tera-Hertz spectrum bands in the fifth generation (5G) and beyond 5G (B5G) wireless networks. Furthermore, efficient spectrum allocation, maximizing the spectrum… ▽ More The increasing popularity of Internet of Everything and small-cell devices has enormously accelerated traffic loads. Consequently, increased bandwidth and high data rate requirements stimulate the operation at the millimeter wave and the Tera-Hertz spectrum bands in the fifth generation (5G) and beyond 5G (B5G) wireless networks. Furthermore, efficient spectrum allocation, maximizing the spectrum utilization, achieving efficient spectrum sharing (SS), and managing the spectrum to enhance the system performance remain challenging. To this end, recent studies have implemented artificial intelligence and machine learning techniques, enabling intelligent and efficient spectrum leveraging. However, despite many recent research advances focused on maximizing utilization of the spectrum bands, achieving efficient sharing, allocation, and management of the enormous available spectrum remains challenging. Therefore, the current article acquaints a comprehensive survey on intelligent SS methodologies for 5G and B5G wireless networks, considering the applications of artificial intelligence for efficient SS. Specifically, a thorough overview of SS methodologies is conferred, following which the various spectrum utilization opportunities arising from the existing SS methodologies in intelligent wireless networks are discussed. Subsequently, to highlight critical limitations of the existing methodologies, recent literature on existing SS methodologies is reviewed in detail, classifying them based on the implemented technology, i.e., cognitive radio, machine learning, blockchain, and multiple other techniques. Moreover, the related SS techniques are reviewed to highlight significant challenges in the B5G intelligent wireless network. Finally, to provide an insight into the prospective research avenues, the article is concluded by presenting several potential research directions and proposed solutions. △ Less

Submitted 17 November, 2022; v1 submitted 16 November, 2022; originally announced November 2022.

Report number: 2024

Journal ref: Computer Networks, Elsevier, 2024

Embracing Off-the-Grid Samples

Authors: Oscar López, Özgür Yılmaz

Abstract: Many empirical studies suggest that samples of continuous-time signals taken at locations randomly deviated from an equispaced grid (i.e., off-the-grid) can benefit signal acquisition, e.g., undersampling and anti-aliasing. However, explicit statements of such advantages and their respective conditions are scarce in the literature. This paper provides some insight on this topic when the sampling p… ▽ More Many empirical studies suggest that samples of continuous-time signals taken at locations randomly deviated from an equispaced grid (i.e., off-the-grid) can benefit signal acquisition, e.g., undersampling and anti-aliasing. However, explicit statements of such advantages and their respective conditions are scarce in the literature. This paper provides some insight on this topic when the sampling positions are known, with grid deviations generated i.i.d. from a variety of distributions. By solving a square-root LASSO decoder with an interpolation kernel we demonstrate the capabilities of nonuniform samples for compressive sampling, an effective paradigm for undersampling and anti-aliasing. For functions in the Wiener algebra that admit a discrete $s$-sparse representation in some transform domain, we show that $\mathcal{O}(s\log N)$ random off-the-grid samples are sufficient to recover an accurate $\frac{N}{2}$-bandlimited approximation of the signal. For sparse signals (i.e., $s \ll N$), this sampling complexity is a great reduction in comparison to equispaced sampling where $\mathcal{O}(N)$ measurements are needed for the same quality of reconstruction (Nyquist-Shannon sampling theorem). We further consider noise attenuation via oversampling (relative to a desired bandwidth), a standard technique with limited theoretical understanding when the sampling positions are non-equispaced. By solving a least squares problem, we show that $\mathcal{O}(N\log N)$ i.i.d. randomly deviated samples provide an accurate $\frac{N}{2}$-bandlimited approximation of the signal with suppression of the noise energy by a factor $\sim\frac{1}{\sqrt{\log N}}$. △ Less

Submitted 20 February, 2023; v1 submitted 4 November, 2022; originally announced November 2022.

Polarization Diversity-enabled LOS/NLOS Identification via Carrier Phase Measurements

Authors: Onel L. A. López, Dileep Kumar, Antti Tölli

Abstract: The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenom… ▽ More The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors. △ Less

Submitted 15 January, 2023; v1 submitted 31 May, 2022; originally announced June 2022.

Comments: accepted at IEEE TCOM

Energy-Efficient Wake-Up Signalling for Machine-Type Devices Based on Traffic-Aware Long-Short Term Memory Prediction

Authors: David E. Ruíz-Guirola, Carlos A. Rodríguez-López, Samuel Montejo-Sánchez, Richard Demo Souza, Onel L. A. López, Hirley Alves

Abstract: Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt… ▽ More Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt to the system dynamics. To overcome this, we design a simple but efficient neural network to predict MTC traffic patterns and configure WuS accordingly. Our proposed forecasting WuS (FWuS) leverages an accurate long-short term memory (LSTM)- based traffic prediction that allows extending the sleep time of MTDs by avoiding frequent page monitoring occasions in idle state. Simulation results show the effectiveness of our approach. The traffic prediction errors are shown to be below 4%, being false alarm and miss-detection probabilities respectively below 8.8% and 1.3%. In terms of energy consumption reduction, FWuS can outperform the best benchmark mechanism in up to 32%. Finally, we certify the ability of FWuS to dynamically adapt to traffic density changes, promoting low-power MTC scalability △ Less

Submitted 13 June, 2022; originally announced June 2022.

Coordinated Pilot Transmissions for Detecting the Signal Sparsity Level in a Massive IoT Network under Rayleigh Fading

Authors: Onel L. A. López, Glauber Brante, Richard D. Souza, Markku Juntti, Matti Latva-aho

Abstract: Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we… ▽ More Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we introduce a framework relying on coordinated pilot transmissions (CPT) over a short phase at the beginning of the transmission block for detecting $K$ in mMTC scenarios under Rayleigh fading. CPT can be implemented either as: i) U-CPT, which exploits only uplink transmissions, or A-CPT, which includes also downlink transmissions for channel state information (CSI) acquisition that resolve fading uncertainty. We discuss two specific implementations of A-CPT: ii) A-CPT-F, which implements CSI-based phase corrections while leveraging the same statistical inverse power control used by U-CPT, and iii) A-CPT-D, which implements a dynamic CSI-based inverse power control, although it requires some active devices to remain in silence if their corresponding channels are too faded. We derive a signal sparsity level detector for each CPT mechanism by relaxing the original integer detection/classification problem to an estimation problem in the continuous real domain followed by a rounding operation. We show that the variance of the relaxed estimator increases with $K^2$ and $K$ when operating with U-CPT and A-CPT mechanisms, respectively. The distribution of the estimators under U-CPT, A-CPT-F and A-CPT-D is found to follow an exponential, Gaussian, and Student's $t-$like distribution, respectively. Analyses evince the superiority of A-CPT-D, which is also corroborated via numerical results. We reveal several interesting trade-offs and highlight potential research directions. △ Less

Submitted 1 May, 2022; originally announced May 2022.

Comments: 31 pages, 8 figures, 2 tables. Submitted to IEEE TWC

Near-Optimal Weighted Matrix Completion

Authors: Oscar López

Abstract: Recent work in the matrix completion literature has shown that prior knowledge of a matrix's row and column spaces can be successfully incorporated into reconstruction programs to substantially benefit matrix recovery. This paper proposes a novel methodology that exploits more general forms of known matrix structure in terms of subspaces. The work derives reconstruction error bounds that are infor… ▽ More Recent work in the matrix completion literature has shown that prior knowledge of a matrix's row and column spaces can be successfully incorporated into reconstruction programs to substantially benefit matrix recovery. This paper proposes a novel methodology that exploits more general forms of known matrix structure in terms of subspaces. The work derives reconstruction error bounds that are informative in practice, providing insight to previous approaches in the literature while introducing novel programs that severely reduce sampling complexity. The main result shows that a family of weighted nuclear norm minimization programs incorporating a $M_1 r$-dimensional subspace of $n\times n$ matrices (where $M_1\geq 1$ conveys structural properties of the subspace) allow accurate approximation of a rank $r$ matrix aligned with the subspace from a near-optimal number of observed entries (within a logarithmic factor of $M_1 r)$. The result is robust, where the error is proportional to measurement noise, applies to full rank matrices, and reflects degraded output when erroneous prior information is utilized. Numerical experiments are presented that validate the theoretical behavior derived for several example weighted programs. △ Less

Submitted 7 April, 2023; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 41 pages, 2 figures

ACM Class: E.4

Spectral Gap-Based Seismic Survey Design

Authors: Oscar López, Rajiv Kumar, Nick Moldoveanu, Felix Herrmann

Abstract: Seismic imaging in challenging sedimentary basins and reservoirs requires acquiring, processing, and imaging very large volumes of data (tens of terabytes). To reduce the cost of acquisition and the time from acquiring the data to producing a subsurface image, novel acquisition systems based on compressive sensing, low-rank matrix recovery, and randomized sampling have been developed and implement… ▽ More Seismic imaging in challenging sedimentary basins and reservoirs requires acquiring, processing, and imaging very large volumes of data (tens of terabytes). To reduce the cost of acquisition and the time from acquiring the data to producing a subsurface image, novel acquisition systems based on compressive sensing, low-rank matrix recovery, and randomized sampling have been developed and implemented. These approaches allow practitioners to achieve dense wavefield reconstruction from a substantially reduced number of field samples. However, designing acquisition surveys suited for this new sampling paradigm remains a critical and challenging role in oil, gas, and geothermal exploration. Typical random designs studied in the low-rank matrix recovery and compressive sensing literature are difficult to achieve by standard industry hardware. For practical purposes, a compromise between stochastic and realizable samples is needed. In this paper, we propose a deterministic and computationally cheap tool to alleviate randomized acquisition design, prior to survey deployment and large-scale optimization. We consider universal and deterministic matrix completion results in the context of seismology, where a bipartite graph representation of the source-receiver layout allows for the respective spectral gap to act as a quality metric for wavefield reconstruction. We provide realistic scenarios to demonstrate the utility of the spectral gap as a flexible tool that can be incorporated into existing survey design workflows for successful seismic data acquisition via low-rank and sparse signal recovery. △ Less

Submitted 20 January, 2023; v1 submitted 9 February, 2022; originally announced February 2022.

MSC Class: 86-08 ACM Class: E.4

Minimization of the Worst-Case Average Energy Consumption in UAV-Assisted IoT Networks

Authors: Osmel Martínez Rosabal, Onel Alcaraz López, Dian Echevarría Pérez, Mohammad Shehab, Henrique Hilleshein, Hirley Alves

Abstract: The Internet of Things (IoT) brings connectivity to a massive number of devices that demand energy-efficient solutions to deal with limited battery capacities, uplink-dominant traffic, and channel impairments. In this work, we explore the use of Unmanned Aerial Vehicles (UAVs) equipped with configurable antennas as a flexible solution for serving low-power IoT networks. We formulate an optimizatio… ▽ More The Internet of Things (IoT) brings connectivity to a massive number of devices that demand energy-efficient solutions to deal with limited battery capacities, uplink-dominant traffic, and channel impairments. In this work, we explore the use of Unmanned Aerial Vehicles (UAVs) equipped with configurable antennas as a flexible solution for serving low-power IoT networks. We formulate an optimization problem to set the position and antenna beamwidth of the UAV, and the transmit power of the IoT devices subject to average-Signal-to-average-Interference-plus-Noise Ratio ($\bar{\text{S}}\overline{\text{IN}}\text{R}$) Quality of Service (QoS) constraints. We minimize the worst-case average energy consumption of the latter, thus, targeting the fairest allocation of the energy resources. The problem is non-convex and highly non-linear; therefore, we re-formulate it as a series of three geometric programs that can be solved iteratively. Results reveal the benefits of planning the network compared to a random deployment in terms of reducing the worst-case average energy consumption. Furthermore, we show that the target $\bar{\text{S}}\overline{\text{IN}}\text{R}$ is limited by the number of IoT devices, and highlight the dominant impact of the UAV hovering height when serving wider areas. Our proposed algorithm outperforms other optimization benchmarks in terms of minimizing the average energy consumption at the most energy-demanding IoT device, and convergence time. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Comments: 12 pages, 8 figures, Journal paper accepted for publication in the IEEE Internet of Things Journal

Zero-Truncated Poisson Regression for Sparse Multiway Count Data Corrupted by False Zeros

Authors: Oscar López, Daniel M. Dunlavy, Richard B. Lehoucq

Abstract: We propose a novel statistical inference methodology for multiway count data that is corrupted by false zeros that are indistinguishable from true zero counts. Our approach consists of zero-truncating the Poisson distribution to neglect all zero values. This simple truncated approach dispenses with the need to distinguish between true and false zero counts and reduces the amount of data to be proc… ▽ More We propose a novel statistical inference methodology for multiway count data that is corrupted by false zeros that are indistinguishable from true zero counts. Our approach consists of zero-truncating the Poisson distribution to neglect all zero values. This simple truncated approach dispenses with the need to distinguish between true and false zero counts and reduces the amount of data to be processed. Inference is accomplished via tensor completion that imposes low-rank tensor structure on the Poisson parameter space. Our main result shows that an $N$-way rank-$R$ parametric tensor $\boldsymbol{\mathscr{M}}\in(0,\infty)^{I\times \cdots\times I}$ generating Poisson observations can be accurately estimated by zero-truncated Poisson regression from approximately $IR^2\log_2^2(I)$ non-zero counts under the nonnegative canonical polyadic decomposition. Our result also quantifies the error made by zero-truncating the Poisson distribution when the parameter is uniformly bounded from below. Therefore, under a low-rank multiparameter model, we propose an implementable approach guaranteed to achieve accurate regression in under-determined scenarios with substantial corruption by false zeros. Several numerical experiments are presented to explore the theoretical results. △ Less

Submitted 11 April, 2023; v1 submitted 24 January, 2022; originally announced January 2022.

Comments: 30 pages, 5 figures

Report number: SAND2022-0803R

Latency-Aware Multi-antenna SWIPT System with Battery-Constrained Receivers

Authors: Dileep Kumar, Onel L. Alcaraz López, Satya Krishna Joshi, Antti Tölli

Abstract: Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. T… ▽ More Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of deterministic and independent subproblems, which are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed design to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic mobile access network. △ Less

Submitted 22 October, 2022; v1 submitted 10 December, 2021; originally announced December 2021.

Comments: 34 pages, 12 figures

Self-energy recycling for low-power reliable networks: Half-duplex or Full-duplex?

Authors: Dian Echevarría Pérez, Onel L. Alcaraz López, Hirley Alves, Matti Latva-aho

Abstract: Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communicat… ▽ More Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communication system. We analyze the trade-offs when considering not only the energy spent on transmission but also the circuitry power consumption, thus making the analysis of much more practical interest. In addition to the well known spectral efficiency improvements, results show that FD also outperforms HD in terms of reliability. We show that sER introduces not only benefits in EE matters but also some modifications on how to achieve maximum reliability fairness between uplink and downlink transmissions, which is the main goal in this work. In order to achieve this objective, we propose the use of a dynamic FD scheme where the small base station (SBS) determines the optimal allocation of antennas for transmission and reception. We show the significant improvement gains of this strategy for the system outage probability when compared to the simple HD and FD schemes. △ Less

Submitted 12 November, 2021; originally announced November 2021.

Comments: The paper is not published yet but it was accepted to be published in IEEE Systems Journal

Dynamic RF Combining for Multi-Antenna Ambient Energy Harvesting

Authors: Onel Luis Alcaraz López, Bruno Clerckx, Matti Latva-aho

Abstract: Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify th… ▽ More Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify the attainable performance gains via three simple phase shifts' exploration mechanisms, namely, brute force (BF), sequential testing (ST) and codebook based (CB). Among the proposed mechanisms, BF demands the highest power consumption, while CB requires the highest-resolution phase shifters, thus tipping the scales in favor of ST. Finally, we show that the performance gains of ST over a rigid RF combining scheme increase with the number of receive antennas and energy transmitters' deployment density. △ Less

Submitted 6 December, 2021; v1 submitted 21 July, 2021; originally announced July 2021.

Comments: 5 pags, 5 figs, accepted for publication in IEEE Wireless Communications Letters

Massive Wireless Energy Transfer with Multiple Power Beacons for very large Internet of Things

Authors: Osmel Martínez Rosabal, Onel L. Alcaraz López, Hirley Alves, Richard D. Souza, Samuel Montejo-Sánchez

Abstract: The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering… ▽ More The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering massive IoT networks, thus eliminating the need for frequent battery replacement by using the so-called power beacons (PBs). In this paper, we provide a framework for minimizing the sum transmit power of the PBs using devices' positions information and their current battery state. Our strategy aims to reduce the PBs' power consumption and to mitigate the possible impact of the electromagnetic radiation on human health. We also present analytical insights for the case of very distant clusters and evaluate their applicability. Numerical results show that our proposed framework reduces the outage probability as the number of PBs and/or the energy demands increase. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 7 pages, 6 figures, Submitted to "The International Workshop on Very Large Internet of Things (2021)"

Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer

Authors: Onel L. A. López, Dileep Kumar, Richard Demo Souza, Petar Popovski, Antti Tölli, Matti Latva-aho

Abstract: Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approx… ▽ More Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice. △ Less

Submitted 28 February, 2022; v1 submitted 23 June, 2021; originally announced June 2021.

Comments: Accepted at IEEE TWC. 16 pags, 14 figures, 3 algorithms

Massive Wireless Energy Transfer with Statistical CSI Beamforming

Authors: Francisco A. Monteiro, Onel L. A. López, Hirley Alves

Abstract: Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clu… ▽ More Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clustered, some degree of spatial correlation between their channels to the base station (BS) is expected to occur. The paper considers a massive antenna array at the BS for WET that only has access to i) the first and second order statistics of the Rician channel component of the multiple-input multiple-output (MIMO) channel and also to ii) the line-of-sight MIMO component. The optimal precoding scheme that maximizes the total energy available to the single-antenna devices is derived considering a continuous alphabet for the precoders, permitting any modulated or deterministic waveform. This may lead to some devices in the clusters being assigned a low fraction of the total available power in the cluster, creating a rather uneven situation among them. Consequently, a fairness criterion is introduced, imposing a minimum amount of power allocated to the terminals. A piece-wise linear harvesting circuit is considered at the terminals, with both saturation and a minimum sensitivity, and a constrained version of the precoder is also proposed by solving a non-linear programming problem. A paramount benefit of the constrained precoder is the encompassment of fairness in the power allocation to the different clusters. Moreover, given the polynomial complexity increase of the proposed unconstrained precoder, and the observed linear gain of the system's available sum-power with an increasing number of antennas at the ULA, the use of massive antenna arrays is desirable. △ Less

Submitted 11 July, 2021; v1 submitted 15 June, 2021; originally announced June 2021.

Comments: Accepted for publication in the IEEE Journal of Selected Topics in Signal Processing, Special Issue on Signal Processing Advances in Wireless Transmission of Information and Power, to be published in Sep. 2021

CSI-free Rotary Antenna Beamforming for Massive RF Wireless Energy Transfer

Authors: Onel L. A. López, Hirley Alves, Samuel Montejo-Sánchez, Richard D. Souza, Matti Latva-aho

Abstract: Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting… ▽ More Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting (EH) IoT nodes from participating in large-scale time/power-consuming CSI training, but still enable some transmit spatial gains. In this paper, we take another step forward by proposing a novel CSI-free rotary antenna beamforming (RAB) WET scheme that outperforms all state-of-the-art CSI-free schemes in a scenario where a power beacon (PB) equipped with a uniform linear array (ULA) powers a large set of surrounding EH IoT devices. RAB uses a properly designed CSI-free beamformer combined with a continuous or periodic rotation of the ULA at the PB to provide average EH gains that scale as $0.85\sqrt{M}$, where $M$ is the number of PB's antenna elements. Moreover, a rotation-specific power control mechanism was proposed to i) fairly optimize the WET process if devices' positioning information is available, and/or ii) to avoid hazards to human health in terms of specific absorption rate (SAR). We show that RAB performance even approaches quickly (or surpasses, for scenarios with sufficiently large number of EH devices, or when using the proposed power control) the performance of a traditional full-CSI based transmit scheme, and it is also less sensitive to SAR constraints. Finally, we discuss important practicalities related to RAB such as its robustness against non line-of-sight conditions compared to other CSI-free WET schemes, and its generalizability to scenarios where the PB uses other than a ULA topology. △ Less

Submitted 27 August, 2021; v1 submitted 26 April, 2021; originally announced April 2021.

Comments: 12 pages, 10 figures. Accepted for publication in IEEE IoT Journal

A Predictive Interference Management Algorithm for URLLC in Beyond 5G Networks

Authors: Nurul Huda Mahmood, Onel Alcaraz Lopez, Hirley Alves, Matti Latva-aho

Abstract: Interference mitigation is a major design challenge in wireless systems,especially in the context of ultra-reliable low-latency communication (URLLC) services. Conventional average-based interference management schemes are not suitable for URLLC as they do not accurately capture the tail information of the interference distribution. This letter proposes a novel interference prediction algorithm th… ▽ More Interference mitigation is a major design challenge in wireless systems,especially in the context of ultra-reliable low-latency communication (URLLC) services. Conventional average-based interference management schemes are not suitable for URLLC as they do not accurately capture the tail information of the interference distribution. This letter proposes a novel interference prediction algorithm that considers the entire interference distribution instead of only the mean. The key idea is to model the interference variation as a discrete state space discrete-time Markov chain. The state transition probability matrix is then used to estimate the state evolution in time, and allocate radio resources accordingly. The proposed scheme is found to meet the target reliability requirements in a low-latency single-shot transmission system considering realistic system assumptions, while requiring only ~25% more resources than the optimum case with perfect interference knowledge. △ Less

Submitted 21 September, 2020; originally announced September 2020.

Comments: Nine pages, six figures, submitted to IEEE Com. Letters

Ultra-low Latency, Low Energy and Massiveness in the 6G Era via Efficient CSIT-limited Schemes

Authors: Onel L. A. López, Nurul H. Mahmood, Hirley Alves, Carlos M. Lima, Matti Latva-aho

Abstract: Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the… ▽ More Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the main limitations of CSI at transmitter side (CSIT)-based designs toward the 6G era, assess how to design and use efficient CSIT-limited schemes that allow meeting the new and stringent requirements, and highlight some key research directions. We delve into the ideas of efficiently allocating pilot sequences, relying on statistical CSIT and/or using location-based strategies, and demonstrate viability via a selected use case. △ Less

Submitted 14 September, 2020; originally announced September 2020.

Comments: accepted for publication at IEEE Communications Magazine

A Low-Complexity Beamforming Design for Multiuser Wireless Energy Transfer

Authors: Onel L. A. López, Francisco A. Monteiro, Hirley Alves, Rui Zhang, Matti Latva-aho

Abstract: Wireless energy transfer (WET) is a green enabler of low-power Internet of Things (IoT). Therein, traditional optimization schemes relying on full channel state information (CSI) are often too costly to implement due to excessive energy consumption and high processing complexity. This letter proposes a simple, yet effective, energy beamforming scheme that allows a multi-antenna power beacon (PB) t… ▽ More Wireless energy transfer (WET) is a green enabler of low-power Internet of Things (IoT). Therein, traditional optimization schemes relying on full channel state information (CSI) are often too costly to implement due to excessive energy consumption and high processing complexity. This letter proposes a simple, yet effective, energy beamforming scheme that allows a multi-antenna power beacon (PB) to fairly power a set of IoT devices by only relying on the first-order statistics of the channels. In addition to low complexity, the proposed scheme performs favorably as compared to benchmarking schemes and its performance improves as the number of PB's antennas increases. Finally, it is shown that further performance improvement can be achieved through proper angular rotations of the PB. △ Less

Submitted 28 August, 2020; originally announced August 2020.

Comments: 4 figures, 1 algorithm, accepted for publication in IEEE Wireless Communications Letters

CSI-free vs CSI-based multi-antenna WET for massive low-power Internet of Things

Authors: Onel L. A. López, Nurul Huda Mahmood, Hirley Alves, Matti Latva-aho

Abstract: Wireless Energy Transfer (WET) is a promising solution for powering massive Internet of Things deployments. An important question is whether the costly Channel State Information (CSI) acquisition procedure is necessary for optimum performance. In this paper, we shed some light into this matter by evaluating CSI-based and CSI-free multi-antenna WET schemes in a setup with WET in the downlink, and p… ▽ More Wireless Energy Transfer (WET) is a promising solution for powering massive Internet of Things deployments. An important question is whether the costly Channel State Information (CSI) acquisition procedure is necessary for optimum performance. In this paper, we shed some light into this matter by evaluating CSI-based and CSI-free multi-antenna WET schemes in a setup with WET in the downlink, and periodic or Poisson-traffic Wireless Information Transfer (WIT) in the uplink. When CSI is available, we show that a maximum ratio transmission beamformer is close to optimum whenever the farthest node experiences at least 3 dB of power attenuation more than the remaining devices. On the other hand, although the adopted CSI-free mechanism is not capable of providing average harvesting gains, it does provide greater WET/WIT diversity with lower energy requirements when compared with the CSI-based scheme. Our numerical results evidence that the CSI-free scheme performs favorably under periodic traffic conditions, but it may be deficient in case of Poisson traffic, specially if the setup is not optimally configured. Finally, we show the prominent performance results when the uplink transmissions are periodic, while highlighting the need of a minimum mean square error equalizer rather than zero-forcing for information decoding. △ Less

Submitted 22 December, 2020; v1 submitted 29 May, 2020; originally announced June 2020.

Comments: 16 pags, 11 figures, Accepted in IEEE TWC

White Paper on Critical and Massive Machine Type Communication Towards 6G

Authors: Nurul Huda Mahmood, Stefan Böcker, Andrea Munari, Federico Clazzer, Ingrid Moerman, Konstantin Mikhaylov, Onel Lopez, Ok-Sun Park, Eric Mercier, Hannes Bartz, Riku Jäntti, Ravikumar Pragada, Yihua Ma, Elina Annanperä, Christian Wietfeld, Martin Andraud, Gianluigi Liva, Yan Chen, Eduardo Garro, Frank Burkhardt, Hirley Alves, Chen-Feng Liu, Yalcin Sadi, Jean-Baptiste Dore, Eunah Kim , et al. (6 additional authors not shown)

Abstract: The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transfor… ▽ More The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transformation of the society. However, it is evident that some of the more demanding requirements cannot be fully supported by 5G networks. Alongside, further development of the society towards 2030 will give rise to new and more stringent requirements on wireless connectivity in general, and MTC in particular. Driven by the societal trends towards 2030, the next generation (6G) will be an agile and efficient convergent network serving a set of diverse service classes and a wide range of key performance indicators (KPI). This white paper explores the main drivers and requirements of an MTC-optimized 6G network, and discusses the following six key research questions: - Will the main KPIs of 5G continue to be the dominant KPIs in 6G; or will there emerge new key metrics? - How to deliver different E2E service mandates with different KPI requirements considering joint-optimization at the physical up to the application layer? - What are the key enablers towards designing ultra-low power receivers and highly efficient sleep modes? - How to tackle a disruptive rather than incremental joint design of a massively scalable waveform and medium access policy for global MTC connectivity? - How to support new service classes characterizing mission-critical and dependable MTC in 6G? - What are the potential enablers of long term, lightweight and flexible privacy and security schemes considering MTC device requirements? △ Less

Submitted 4 May, 2020; v1 submitted 29 April, 2020; originally announced April 2020.

Comments: White paper by http://www.6GFlagship.com

Enabling URLLC for Low-Cost IoT Devices via Diversity Combining Schemes

Authors: Onel L. Alcaraz López, Nurul Huda Mahmood, Hirley Alves

Abstract: Supporting Ultra-Reliable Low-Latency Communication (URLLC) in the Internet of Things (IoT) era is challenging due to stringent constraints on latency and reliability combined with the simple circuitry of IoT nodes. Diversity is usually required for sustaining the reliability levels of URLLC, but there is an additional delay associated to auxiliary procedures to be considered, specially when commu… ▽ More Supporting Ultra-Reliable Low-Latency Communication (URLLC) in the Internet of Things (IoT) era is challenging due to stringent constraints on latency and reliability combined with the simple circuitry of IoT nodes. Diversity is usually required for sustaining the reliability levels of URLLC, but there is an additional delay associated to auxiliary procedures to be considered, specially when communication includes low-cost IoT devices. Herein, we analyze Selection Combining (SC) and Switch and Stay Combining (SSC) diversity schemes as plausible solutions for enabling ultra-reliable low-latency downlink communications to low-cost IoT devices. We demonstrate the necessity of considering the time spent in auxiliary procedures, which has not been traditionally taken into account, while we show its impact on the reliability performance. We show there is an optimum number of receive antennas, which suggests that under certain conditions it might be required to turn off some of them, specially under the SC operation. We highlight the superiority of SSC with respect to SC as long the associated Signal-to-Noise Ratio threshold is properly selected. We propose using a fixed threshold relying only on long-term channel fading statistics, which leads to near-optimum results. △ Less

Submitted 4 March, 2020; originally announced March 2020.

Comments: Accepted at ICC'20 Workshop - ULMC6GN, 6 pags, 3 figures

On CSI-free Multi-Antenna Schemes for Massive RF Wireless Energy Transfer

Authors: Onel L. A. López, Samuel Montejo-Sánchez, Richard D. Souza, Hirley Alves, Constantinos B. Papadias

Abstract: Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits… ▽ More Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits at a time such that all antennas are utilized during the coherence block. We characterize the distribution of the provided energy under correlated Rician fading for each scheme and find out that while AA-IS and SA cannot take advantage of the multiple antennas to improve the average provided energy, its dispersion can be significantly reduced. Meanwhile, AA-SS provides the greatest average energy, but also the greatest energy dispersion, and the gains depend critically on the mean phase shifts between the antenna elements. We find that consecutive antennas must be $π$ phase-shifted for optimum average energy performance under AA-SS. Our numerical results evidenced that correlation is beneficial under AA-SS, while a greater line of sight (LOS) and/or number of antennas is not always beneficial under such scheme. Meanwhile, both AA-IS and SA schemes benefit from small correlation, large LOS and/or large number of antennas. △ Less

Submitted 15 June, 2020; v1 submitted 6 February, 2020; originally announced February 2020.

Comments: 16 pags, 10 figs, 1 table, submitted to IEEE JSAC 2020

Massive Wireless Energy Transfer: Enabling Sustainable IoT Towards 6G Era

Authors: Onel L. Alcaraz López, Hirley Alves, Richard Demo Souza, Samuel Montejo-Sánchez, Evelio M. García Fernández, Matti Latva-aho

Abstract: Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), adva… ▽ More Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), advances on devices' hardware and programmable medium, new spectrum opportunities, resource scheduling and distributed ledger technology are outlined. Special emphasis is placed on discussing the suitability of channel state information (CSI)-limited/free strategies when powering simultaneously a massive number of devices. The benefits from combining DAS and EB, and from using average CSI whenever available, are numerically illustrated. The pros and cons of the state-of-the-art CSI-free WET techniques in ultra-low power setups are thoroughly revised, and some possible future enhancements are outlined. Finally, key research directions towards realizing WET-enabled massive IoT networks in the 6G era are identified and discussed in detail. △ Less

Submitted 2 January, 2021; v1 submitted 11 December, 2019; originally announced December 2019.

Comments: 19 pags, 15 figures, 5 tables, submitted to IEEE Internet of Things Journal