-
Federated Learning-Distillation Alternation for Resource-Constrained IoT
Authors:
Rafael Valente da Silva,
Onel L. Alcaraz López,
Richard Demo Souza
Abstract:
Federated learning (FL) faces significant challenges in Internet of Things (IoT) networks due to device limitations in energy and communication resources, especially when considering the large size of FL models. From an energy perspective, the challenge is aggravated if devices rely on energy harvesting (EH), as energy availability can vary significantly over time, influencing the average number o…
▽ More
Federated learning (FL) faces significant challenges in Internet of Things (IoT) networks due to device limitations in energy and communication resources, especially when considering the large size of FL models. From an energy perspective, the challenge is aggravated if devices rely on energy harvesting (EH), as energy availability can vary significantly over time, influencing the average number of participating users in each iteration. Additionally, the transmission of large model updates is more susceptible to interference from uncorrelated background traffic in shared wireless environments. As an alternative, federated distillation (FD) reduces communication overhead and energy consumption by transmitting local model outputs, which are typically much smaller than the entire model used in FL. However, this comes at the cost of reduced model accuracy. Therefore, in this paper, we propose FL-distillation alternation (FLDA). In FLDA, devices alternate between FD and FL phases, balancing model information with lower communication overhead and energy consumption per iteration. We consider a multichannel slotted-ALOHA EH-IoT network subject to background traffic/interference. In such a scenario, FLDA demonstrates higher model accuracy than both FL and FD, and achieves faster convergence than FL. Moreover, FLDA achieves target accuracies saving up to 98% in energy consumption, while also being less sensitive to interference, both relative to FL.
△ Less
Submitted 26 May, 2025;
originally announced May 2025.
-
Dimensioning and Optimization of Reliability Coverage in Local 6G Networks
Authors:
Jacek Kibiłda,
Dian Echevarría Pérez,
André Gomes,
Onel L. Alcaraz López,
Arthur S. de Sena,
Nurul Huda Mahmood,
Hirley Alves
Abstract:
Enabling vertical use cases for the sixth generation (6G) wireless networks, such as automated manufacturing, immersive extended reality (XR), and self-driving fleets, will require network designs that meet reliability and latency targets in well-defined service areas. In order to establish a quantifiable design objective, we introduce the novel concept of reliability coverage, defined as the perc…
▽ More
Enabling vertical use cases for the sixth generation (6G) wireless networks, such as automated manufacturing, immersive extended reality (XR), and self-driving fleets, will require network designs that meet reliability and latency targets in well-defined service areas. In order to establish a quantifiable design objective, we introduce the novel concept of reliability coverage, defined as the percentage area covered by communication services operating under well-defined reliability and performance targets. Reliability coverage allows us to unify the different network design tasks occurring at different time scales, namely resource orchestration and allocation, resulting in a single framework for dimensioning and optimization in local 6G networks. The two time scales, when considered together, yield remarkably consistent results and allow us to observe how stringent reliability/latency requirements translate into the increased wireless network resource demands.
△ Less
Submitted 14 May, 2025;
originally announced May 2025.
-
Uncertainty Quantification for Machine Learning in Healthcare: A Survey
Authors:
L. Julián Lechuga López,
Shaza Elsharief,
Dhiyaa Al Jorf,
Firas Darwish,
Congbo Ma,
Farah E. Shamout
Abstract:
Uncertainty Quantification (UQ) is pivotal in enhancing the robustness, reliability, and interpretability of Machine Learning (ML) systems for healthcare, optimizing resources and improving patient care. Despite the emergence of ML-based clinical decision support tools, the lack of principled quantification of uncertainty in ML models remains a major challenge. Current reviews have a narrow focus…
▽ More
Uncertainty Quantification (UQ) is pivotal in enhancing the robustness, reliability, and interpretability of Machine Learning (ML) systems for healthcare, optimizing resources and improving patient care. Despite the emergence of ML-based clinical decision support tools, the lack of principled quantification of uncertainty in ML models remains a major challenge. Current reviews have a narrow focus on analyzing the state-of-the-art UQ in specific healthcare domains without systematically evaluating method efficacy across different stages of model development, and despite a growing body of research, its implementation in healthcare applications remains limited. Therefore, in this survey, we provide a comprehensive analysis of current UQ in healthcare, offering an informed framework that highlights how different methods can be integrated into each stage of the ML pipeline including data processing, training and evaluation. We also highlight the most popular methods used in healthcare and novel approaches from other domains that hold potential for future adoption in the medical context. We expect this study will provide a clear overview of the challenges and opportunities of implementing UQ in the ML pipeline for healthcare, guiding researchers and practitioners in selecting suitable techniques to enhance the reliability, safety and trust from patients and clinicians on ML-driven healthcare solutions.
△ Less
Submitted 4 May, 2025;
originally announced May 2025.
-
An efficient GPU approach for designing 3D cultural heritage information systems
Authors:
Luis López,
Juan Carlos Torres,
Germán Arroyo,
Pedro Cano,
Domingo Martín
Abstract:
We propose a new architecture for 3D information systems that takes advantage of the inherent parallelism of the GPUs. This new solution structures information as thematic layers, allowing a level of detail independent of the resolution of the meshes. Previous proposals of layer based systems present issues, both in terms of performance and storage, due to the use of octrees to index information.…
▽ More
We propose a new architecture for 3D information systems that takes advantage of the inherent parallelism of the GPUs. This new solution structures information as thematic layers, allowing a level of detail independent of the resolution of the meshes. Previous proposals of layer based systems present issues, both in terms of performance and storage, due to the use of octrees to index information. In contrast, our approach employs two-dimensional textures, highly efficient in GPU, to store and index information. In this article we describe this architecture and detail the GPU algorithms required to edit these layers. Finally, we present a performance comparison of our approach against an octree based system.
△ Less
Submitted 15 January, 2025;
originally announced January 2025.
-
Temporal Graph MLP Mixer for Spatio-Temporal Forecasting
Authors:
Muhammad Bilal,
Luis Carretero Lopez
Abstract:
Spatiotemporal forecasting is critical in applications such as traffic prediction, climate modeling, and environmental monitoring. However, the prevalence of missing data in real-world sensor networks significantly complicates this task. In this paper, we introduce the Temporal Graph MLP-Mixer (T-GMM), a novel architecture designed to address these challenges. The model combines node-level process…
▽ More
Spatiotemporal forecasting is critical in applications such as traffic prediction, climate modeling, and environmental monitoring. However, the prevalence of missing data in real-world sensor networks significantly complicates this task. In this paper, we introduce the Temporal Graph MLP-Mixer (T-GMM), a novel architecture designed to address these challenges. The model combines node-level processing with patch-level subgraph encoding to capture localized spatial dependencies while leveraging a three-dimensional MLP-Mixer to handle temporal, spatial, and feature-based dependencies. Experiments on the AQI, ENGRAD, PV-US and METR-LA datasets demonstrate the model's ability to effectively forecast even in the presence of significant missing data. While not surpassing state-of-the-art models in all scenarios, the T-GMM exhibits strong learning capabilities, particularly in capturing long-range dependencies. These results highlight its potential for robust, scalable spatiotemporal forecasting.
△ Less
Submitted 17 January, 2025;
originally announced January 2025.
-
Large Physics Models: Towards a collaborative approach with Large Language Models and Foundation Models
Authors:
Kristian G. Barman,
Sascha Caron,
Emily Sullivan,
Henk W. de Regt,
Roberto Ruiz de Austri,
Mieke Boon,
Michael Färber,
Stefan Fröse,
Faegheh Hasibi,
Andreas Ipp,
Rukshak Kapoor,
Gregor Kasieczka,
Daniel Kostić,
Michael Krämer,
Tobias Golling,
Luis G. Lopez,
Jesus Marco,
Sydney Otten,
Pawel Pawlowski,
Pietro Vischia,
Erik Weber,
Christoph Weniger
Abstract:
This paper explores ideas and provides a potential roadmap for the development and evaluation of physics-specific large-scale AI models, which we call Large Physics Models (LPMs). These models, based on foundation models such as Large Language Models (LLMs) - trained on broad data - are tailored to address the demands of physics research. LPMs can function independently or as part of an integrated…
▽ More
This paper explores ideas and provides a potential roadmap for the development and evaluation of physics-specific large-scale AI models, which we call Large Physics Models (LPMs). These models, based on foundation models such as Large Language Models (LLMs) - trained on broad data - are tailored to address the demands of physics research. LPMs can function independently or as part of an integrated framework. This framework can incorporate specialized tools, including symbolic reasoning modules for mathematical manipulations, frameworks to analyse specific experimental and simulated data, and mechanisms for synthesizing theories and scientific literature. We begin by examining whether the physics community should actively develop and refine dedicated models, rather than relying solely on commercial LLMs. We then outline how LPMs can be realized through interdisciplinary collaboration among experts in physics, computer science, and philosophy of science. To integrate these models effectively, we identify three key pillars: Development, Evaluation, and Philosophical Reflection. Development focuses on constructing models capable of processing physics texts, mathematical formulations, and diverse physical data. Evaluation assesses accuracy and reliability by testing and benchmarking. Finally, Philosophical Reflection encompasses the analysis of broader implications of LLMs in physics, including their potential to generate new scientific understanding and what novel collaboration dynamics might arise in research. Inspired by the organizational structure of experimental collaborations in particle physics, we propose a similarly interdisciplinary and collaborative approach to building and refining Large Physics Models. This roadmap provides specific objectives, defines pathways to achieve them, and identifies challenges that must be addressed to realise physics-specific large scale AI models.
△ Less
Submitted 9 January, 2025;
originally announced January 2025.
-
Fuzzy Norm-Explicit Product Quantization for Recommender Systems
Authors:
Mohammadreza Jamalifard,
Javier Andreu-Perez,
Hani Hagras,
Luis Martínez López
Abstract:
As the data resources grow, providing recommendations that best meet the demands has become a vital requirement in business and life to overcome the information overload problem. However, building a system suggesting relevant recommendations has always been a point of debate. One of the most cost-efficient techniques in terms of producing relevant recommendations at a low complexity is Product Qua…
▽ More
As the data resources grow, providing recommendations that best meet the demands has become a vital requirement in business and life to overcome the information overload problem. However, building a system suggesting relevant recommendations has always been a point of debate. One of the most cost-efficient techniques in terms of producing relevant recommendations at a low complexity is Product Quantization (PQ). PQ approaches have continued developing in recent years. This system's crucial challenge is improving product quantization performance in terms of recall measures without compromising its complexity. This makes the algorithm suitable for problems that require a greater number of potentially relevant items without disregarding others, at high-speed and low-cost to keep up with traffic. This is the case of online shops where the recommendations for the purpose are important, although customers can be susceptible to scoping other products. This research proposes a fuzzy approach to perform norm-based product quantization. Type-2 Fuzzy sets (T2FSs) define the codebook allowing sub-vectors (T2FSs) to be associated with more than one element of the codebook, and next, its norm calculus is resolved by means of integration. Our method finesses the recall measure up, making the algorithm suitable for problems that require querying at most possible potential relevant items without disregarding others. The proposed method outperforms all PQ approaches such as NEQ, PQ, and RQ up to +6%, +5%, and +8% by achieving a recall of 94%, 69%, 59% in Netflix, Audio, Cifar60k datasets, respectively. More and over, computing time and complexity nearly equals the most computationally efficient existing PQ method in the state-of-the-art.
△ Less
Submitted 8 December, 2024;
originally announced December 2024.
-
NYT-Connections: A Deceptively Simple Text Classification Task that Stumps System-1 Thinkers
Authors:
Angel Yahir Loredo Lopez,
Tyler McDonald,
Ali Emami
Abstract:
Large Language Models (LLMs) have shown impressive performance on various benchmarks, yet their ability to engage in deliberate reasoning remains questionable. We present NYT-Connections, a collection of 358 simple word classification puzzles derived from the New York Times Connections game. This benchmark is designed to penalize quick, intuitive "System 1" thinking, isolating fundamental reasonin…
▽ More
Large Language Models (LLMs) have shown impressive performance on various benchmarks, yet their ability to engage in deliberate reasoning remains questionable. We present NYT-Connections, a collection of 358 simple word classification puzzles derived from the New York Times Connections game. This benchmark is designed to penalize quick, intuitive "System 1" thinking, isolating fundamental reasoning skills. We evaluated six recent LLMs, a simple machine learning heuristic, and humans across three configurations: single-attempt, multiple attempts without hints, and multiple attempts with contextual hints. Our findings reveal a significant performance gap: even top-performing LLMs like GPT-4 fall short of human performance by nearly 30%. Notably, advanced prompting techniques such as Chain-of-Thought and Self-Consistency show diminishing returns as task difficulty increases. NYT-Connections uniquely combines linguistic isolation, resistance to intuitive shortcuts, and regular updates to mitigate data leakage, offering a novel tool for assessing LLM reasoning capabilities.
△ Less
Submitted 25 February, 2025; v1 submitted 2 December, 2024;
originally announced December 2024.
-
On the Spectral Efficiency of D-MIMO Networks under Rician Fading
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Contemporary wireless communications systems adopt the Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique: a single base station or Access Point (AP) equipped with multiple antenna elements serves multiple active users simultaneously. Aiming at providing a more uniform wireless coverage, industry and academia have been working towards the evolution from centralized MIMO to Distributed-M…
▽ More
Contemporary wireless communications systems adopt the Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique: a single base station or Access Point (AP) equipped with multiple antenna elements serves multiple active users simultaneously. Aiming at providing a more uniform wireless coverage, industry and academia have been working towards the evolution from centralized MIMO to Distributed-MIMO. That is, instead of having all the antenna elements co-located at a single AP, multiple APs, each equipped with a few or a single antenna element, jointly cooperate to serve the active users in the coverage area. In this work, we evaluate the performance of different D-MIMO setups under Rician fading, and considering different receive combining schemes. Note that the Rician fading model is convenient for MU-MIMO performance assessment, as it encompasses a wide variety of scenarios. Our numerical results show that the correlation among the channel vectors of different users increases with the Rician factor, which leads to a reduction on the achievable Spectral Efficiency (SE). Moreover, given a total number of antenna elements, there is an optimal number of APs and antenna elements per AP that provides the best performance. This "sweet spot" depends on the Rician factor and on the adopted receive combining scheme.
△ Less
Submitted 23 September, 2024;
originally announced October 2024.
-
Modeling IoT Traffic Patterns: Insights from a Statistical Analysis of an MTC Dataset
Authors:
David E. Ruiz-Guirola,
Onel L. A. Løpez,
Samuel Montejo-Sanchez
Abstract:
The Internet-of-Things (IoT) is rapidly expanding, connecting numerous devices and becoming integral to our daily lives. As this occurs, ensuring efficient traffic management becomes crucial. Effective IoT traffic management requires modeling and predicting intrincate machine-type communication (MTC) dynamics, for which machine-learning (ML) techniques are certainly appealing. However, obtaining c…
▽ More
The Internet-of-Things (IoT) is rapidly expanding, connecting numerous devices and becoming integral to our daily lives. As this occurs, ensuring efficient traffic management becomes crucial. Effective IoT traffic management requires modeling and predicting intrincate machine-type communication (MTC) dynamics, for which machine-learning (ML) techniques are certainly appealing. However, obtaining comprehensive and high-quality datasets, along with accessible platforms for reproducing ML-based predictions, continues to impede the research progress. In this paper, we aim to fill this gap by characterizing the Smart Campus MTC dataset provided by the University of Oulu. Specifically, we perform a comprehensive statistical analysis of the MTC traffic utilizing goodness-of-fit tests, including well-established tests such as Kolmogorov-Smirnov, Anderson-Darling, chi-squared, and root mean square error. The analysis centers on examining and evaluating three models that accurately represent the two most significant MTC traffic types: periodic updating and event-driven, which are also identified from the dataset. The results demonstrate that the models accurately characterize the traffic patterns. The Poisson point process model exhibits the best fit for event-driven patterns with errors below 11%, while the quasi-periodic model fits accurately the periodic updating traffic with errors below 7%.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Evolving A* to Efficiently Solve the k Shortest-Path Problem (Extended Version)
Authors:
Carlos Linares López,
Ian Herman
Abstract:
The problem of finding the shortest path in a graph G(V, E) has been widely studied. However, in many applications it is necessary to compute an arbitrary number of them, k. Even though the problem has raised a lot of interest from different research communities and many applications of it are known, it has not been addressed to the same extent as the single shortest path problem. The best algorit…
▽ More
The problem of finding the shortest path in a graph G(V, E) has been widely studied. However, in many applications it is necessary to compute an arbitrary number of them, k. Even though the problem has raised a lot of interest from different research communities and many applications of it are known, it has not been addressed to the same extent as the single shortest path problem. The best algorithm known for efficiently solving this task has a time complexity of O (|E| + |V|log{|V|}+k|V|)$ when computing paths in explicit form, and is based on best-first search. This paper introduces a new search algorithm with the same time complexity, which results from a natural evolution of A* thus, it preserves all its interesting properties, making it widely applicable to many different domains. Experiments in various testbeds show a significant improvement in performance over the state of the art, often by one or two orders of magnitude.
△ Less
Submitted 15 August, 2024;
originally announced August 2024.
-
Neural Network-Based Bandit: A Medium Access Control for the IIoT Alarm Scenario
Authors:
Prasoon Raghuwanshi,
Onel Luis Alcaraz López,
Neelesh B. Mehta,
Hirley Alves,
Matti Latva-aho
Abstract:
Efficient Random Access (RA) is critical for enabling reliable communication in Industrial Internet of Things (IIoT) networks. Herein, we propose a deep reinforcement learning based distributed RA scheme, entitled Neural Network-Based Bandit (NNBB), for the IIoT alarm scenario. In such a scenario, the devices may detect a common critical event, and the goal is to ensure the alarm information is de…
▽ More
Efficient Random Access (RA) is critical for enabling reliable communication in Industrial Internet of Things (IIoT) networks. Herein, we propose a deep reinforcement learning based distributed RA scheme, entitled Neural Network-Based Bandit (NNBB), for the IIoT alarm scenario. In such a scenario, the devices may detect a common critical event, and the goal is to ensure the alarm information is delivered successfully from at least one device. The proposed NNBB scheme is implemented at each device, where it trains itself online and establishes implicit inter-device coordination to achieve the common goal. Devices can transmit simultaneously on multiple orthogonal channels and each possible transmission pattern constitutes a possible action for the NNBB, which uses a deep neural network to determine the action. Our simulation results show that as the number of devices in the network increases, so does the performance gain of the NNBB compared to the Multi-Armed Bandit (MAB) RA benchmark. For instance, NNBB experiences a 7% success rate drop when there are four channels and the number of devices increases from 10 to 60, while MAB faces a 25% drop.
△ Less
Submitted 22 November, 2024; v1 submitted 23 July, 2024;
originally announced July 2024.
-
Intelligent Duty Cycling Management and Wake-up for Energy Harvesting IoT Networks with Correlated Activity
Authors:
David E. Ruíz-Guirola,
Onel L. A. López,
Samuel Montejo-Sánchez,
Israel Leyva Mayorga,
Zhu Han,
Petar Popovski
Abstract:
This paper presents an approach for energy-neutral Internet of Things (IoT) scenarios where the IoT devices (IoTDs) rely entirely on their energy harvesting capabilities to sustain operation. We use a Markov chain to represent the operation and transmission states of the IoTDs, a modulated Poisson process to model their energy harvesting process, and a discrete-time Markov chain to model their bat…
▽ More
This paper presents an approach for energy-neutral Internet of Things (IoT) scenarios where the IoT devices (IoTDs) rely entirely on their energy harvesting capabilities to sustain operation. We use a Markov chain to represent the operation and transmission states of the IoTDs, a modulated Poisson process to model their energy harvesting process, and a discrete-time Markov chain to model their battery state. The aim is to efficiently manage the duty cycling of the IoTDs, so as to prolong their battery life and reduce instances of low-energy availability. We propose a duty-cycling management based on K- nearest neighbors, aiming to strike a trade-off between energy efficiency and detection accuracy. This is done by incorporating spatial and temporal correlations among IoTDs' activity, as well as their energy harvesting capabilities. We also allow the base station to wake up specific IoTDs if more information about an event is needed upon initial detection. Our proposed scheme shows significant improvements in energy savings and performance, with up to 11 times lower misdetection probability and 50\% lower energy consumption for high-density scenarios compared to a random duty cycling benchmark.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
EVT-enriched Radio Maps for URLLC
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at u…
▽ More
This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at unobserved locations. This innovative method offers a versatile solution adaptable to various resource allocation challenges in ultra-reliable low-latency communications. We evaluate the performance of this method in a rate maximisation problem with defined outage constraints and compare it with a benchmark in the literature. Notably, the proposed approach meets the outage demands in a larger percentage of the coverage area and reaches higher transmission rates.
△ Less
Submitted 6 April, 2024;
originally announced April 2024.
-
Assessment of the Sparsity-Diversity Trade-offs in Active Users Detection for mMTC with the Orthogonal Matching Pursuit
Authors:
Gabriel Martins de Jesus,
Onel Luis Alcaraz Lopez,
Richard Demo Souza,
Nurul Huda Mahmood,
Markku Juntti,
Matti Latva-Aho
Abstract:
Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsi…
▽ More
Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsity in the AUD problem. Single-antenna users transmit multiple copies of non-orthogonal pilots across multiple frequency channels and the base station independently performs AUD in each channel using the orthogonal matching pursuit algorithm. We note that, although frequency diversity may improve the likelihood of successful reception of the signals, it may also damage the channel sparsity level, leading to important trade-offs. We show that a sparser signal significantly benefits AUD, surpassing the advantages brought by frequency diversity in scenarios with limited temporal resources and/or high numbers of receive antennas. Conversely, with longer pilots and fewer receive antennas, investing in frequency diversity becomes more impactful, resulting in a tenfold AUD performance improvement.
△ Less
Submitted 12 February, 2025; v1 submitted 8 February, 2024;
originally announced February 2024.
-
On the Spectral Efficiency of Indoor Wireless Networks with a Rotary Uniform Linear Array
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained…
▽ More
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained traction among the research community. By moving in a confined region, movable antennas are able to exploit the wireless channel variation in the continuous domain. This additional degree of freedom may enhance the quality of the wireless links, and consequently the communication performance. However, movable antennas for MU-MIMO proposed in the literature are complex, bulky, expensive and present a high power consumption. In this paper, we propose an alternative to such systems that has lower complexity and lower cost. More specifically, we propose the incorporation of rotation capabilities to APs equipped with Uniform Linear Arrays (ULAs) of antennas. We consider the uplink of an indoor scenario where the AP serves multiple devices simultaneously. The optimal rotation of the ULA is computed based on estimates of the positions of the active devices and aiming at maximizing the per-user mean achievable Spectral Efficiency (SE). Adopting a spatially correlated Rician channel model, our numerical results show that the rotation capabilities of the AP can bring substantial improvements in the SE in scenarios where the line-of-sight component of the channel vectors is strong. Moreover, our proposed system is robust against imperfect positioning estimates.
△ Less
Submitted 23 December, 2024; v1 submitted 8 February, 2024;
originally announced February 2024.
-
Detection of Distributed Denial of Service Attacks Carried Out by Botnets in Software-Defined Networks
Authors:
Jaime Tamayo,
Lorena Isabel Barona López,
Ángel Leonardo Valdivieso Caraguay
Abstract:
Recent years witnessed a surge in network traffic due to the emergence of new online services, causing periodic saturation and complexity problems. Additionally, the growing number of IoT devices further compounds the problem. Software Defined Network (SDN) is a new architecture which offers innovative advantages that help to reduce saturation problems. Despite its benefits, SDNs not only can be a…
▽ More
Recent years witnessed a surge in network traffic due to the emergence of new online services, causing periodic saturation and complexity problems. Additionally, the growing number of IoT devices further compounds the problem. Software Defined Network (SDN) is a new architecture which offers innovative advantages that help to reduce saturation problems. Despite its benefits, SDNs not only can be affected by traditional attacks but also introduce new security challenges. In this context, Distributed Denial of Service (DDoS) is one of the most important attacks that can damage an SDN network's normal operation. Furthermore, if these attacks are executed using botnets, they can use thousands of compromised devices to disrupt critical online services. This paper proposes a framework for detecting DDoS attacks generated by a group of botnets in an SDN network. The framework is implemented using open-source tools such as Mininet and OpenDaylight and tested in a centralized network topology using BYOB and SNORT. The results demonstrate real-time attack identification by implementing an intrusion detection mechanism in the victim client. Our proposed solution offers quick and effective detection of DDoS attacks in SDN networks. The framework can successfully differentiate the type of attack with high accuracy in a short time
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Rectangle Search: An Anytime Beam Search (Extended Version)
Authors:
Sofia Lemons,
Wheeler Ruml,
Robert C. Holte,
Carlos Linares López
Abstract:
Anytime heuristic search algorithms try to find a (potentially suboptimal) solution as quickly as possible and then work to find better and better solutions until an optimal solution is obtained or time is exhausted. The most widely-known anytime search algorithms are based on best-first search. In this paper, we propose a new algorithm, rectangle search, that is instead based on beam search, a va…
▽ More
Anytime heuristic search algorithms try to find a (potentially suboptimal) solution as quickly as possible and then work to find better and better solutions until an optimal solution is obtained or time is exhausted. The most widely-known anytime search algorithms are based on best-first search. In this paper, we propose a new algorithm, rectangle search, that is instead based on beam search, a variant of breadth-first search. It repeatedly explores alternatives at all depth levels and is thus best-suited to problems featuring deep local minima. Experiments using a variety of popular search benchmarks suggest that rectangle search is competitive with fixed-width beam search and often performs better than the previous best anytime search algorithms.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Channel Scheduling for IoT Access with Spatial Correlation
Authors:
Prasoon Raghuwanshi,
Onel Luis Alcaraz López,
Petar Popovski,
Matti Latva-aho
Abstract:
Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among de…
▽ More
Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among devices. This formulation allows the devices to stochastically select the transmit channels, thus, leading to a soft-clustering approach. We prove that the optimal QP solution can only be attained when it is transformed into a hard-clustering problem, leading to a pure integer QP, which we transform into a pure integer linear program (PILP). We leverage the branch-and-cut (B&C) algorithm to solve PILP optimally. Due to the high computational cost of B&C, we resort to some sub-optimal clustering methods with low computational costs to tackle the clustering problem in CS. Our findings demonstrate that the CS strategy, sourced from B&C, significantly outperforms those derived from sub-optimal clustering methods, even amidst increased device correlation.
△ Less
Submitted 17 November, 2023;
originally announced December 2023.
-
Informative Priors Improve the Reliability of Multimodal Clinical Data Classification
Authors:
L. Julian Lechuga Lopez,
Tim G. J. Rudner,
Farah E. Shamout
Abstract:
Machine learning-aided clinical decision support has the potential to significantly improve patient care. However, existing efforts in this domain for principled quantification of uncertainty have largely been limited to applications of ad-hoc solutions that do not consistently improve reliability. In this work, we consider stochastic neural networks and design a tailor-made multimodal data-driven…
▽ More
Machine learning-aided clinical decision support has the potential to significantly improve patient care. However, existing efforts in this domain for principled quantification of uncertainty have largely been limited to applications of ad-hoc solutions that do not consistently improve reliability. In this work, we consider stochastic neural networks and design a tailor-made multimodal data-driven (M2D2) prior distribution over network parameters. We use simple and scalable Gaussian mean-field variational inference to train a Bayesian neural network using the M2D2 prior. We train and evaluate the proposed approach using clinical time-series data in MIMIC-IV and corresponding chest X-ray images in MIMIC-CXR for the classification of acute care conditions. Our empirical results show that the proposed method produces a more reliable predictive model compared to deterministic and Bayesian neural network baselines.
△ Less
Submitted 16 November, 2023;
originally announced December 2023.
-
High-Power and Safe RF Wireless Charging: Cautious Deployment and Operation
Authors:
Onel L. A. López,
Osmel M. Rosabal,
Amirhossein Azarbahram,
A. Basit Khattak,
Mehdi Monemi,
Richard D. Souza,
Petar Popovski,
Matti Latva-aho
Abstract:
The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT…
▽ More
The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT implementation and operation require efficient and cautious strategies and protocols, especially when targeting high-power charging, which constitutes the scope of this work. Herein, we overview the main factors affecting the end-to-end PTE of RF-WPT systems and their multiplicative effect and interdependencies. Moreover, we discuss key electromagnetic field (EMF) exposure metrics, safety limits, and approaches for efficient and EMF-aware deployment and operation. Quantitatively, we show that near-field RF charging may significantly reduce EMF exposure, and thus must be promoted. We also present our vision of a cyber-physical system for efficient and safe wireless charging, specify key components and their interrelation, and illustrate numerically the PTE attained by two modern low-power multi-antenna architectures in a simple setup. Throughout the paper, we highlight the need for high end-to-end PTE architectures and charging protocols transparently complying with EMF exposure regulations and outline relevant challenges and research directions. This work expands the vision and understanding of modern RF-WPT technology and constitutes a step towards making the technology attractive for worldwide commercial exploitation.
△ Less
Submitted 20 September, 2023;
originally announced November 2023.
-
MELAGE: A purely python based Neuroimaging software (Neonatal)
Authors:
Bahram Jafrasteh,
Simón Pedro Lubián López,
Isabel Benavente Fernández
Abstract:
MELAGE, a pioneering Python-based neuroimaging software, emerges as a versatile tool for the visualization, processing, and analysis of medical images. Initially conceived to address the unique challenges of processing 3D ultrasound and MRI brain images during the neonatal period, MELAGE exhibits remarkable adaptability, extending its utility to the domain of adult human brain imaging. At its core…
▽ More
MELAGE, a pioneering Python-based neuroimaging software, emerges as a versatile tool for the visualization, processing, and analysis of medical images. Initially conceived to address the unique challenges of processing 3D ultrasound and MRI brain images during the neonatal period, MELAGE exhibits remarkable adaptability, extending its utility to the domain of adult human brain imaging. At its core, MELAGE features a semi-automatic brain extraction tool empowered by a deep learning module, ensuring precise and efficient brain structure extraction from MRI and 3D Ultrasound data. Moreover, MELAGE offers a comprehensive suite of features, encompassing dynamic 3D visualization, accurate measurements, and interactive image segmentation. This transformative software holds immense promise for researchers and clinicians, offering streamlined image analysis, seamless integration with deep learning algorithms, and broad applicability in the realm of medical imaging.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Energy-Aware Federated Learning with Distributed User Sampling and Multichannel ALOHA
Authors:
Rafael Valente da Silva,
Onel L. Alcaraz López,
Richard Demo Souza
Abstract:
Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained…
▽ More
Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained model. To solve these problems, this letter considers the integration of energy harvesting (EH) devices into a FL network with multi-channel ALOHA, while proposing a method to ensure both low energy outage probability and successful execution of future tasks. Numerical results demonstrate the effectiveness of this method, particularly in critical setups where the average energy income fails to cover the iteration cost. The method outperforms a norm based solution in terms of convergence time and battery level.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Extreme Value Theory-based Robust Minimum-Power Precoding for URLLC
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
Channel state information (CSI) is crucial for achieving ultra-reliable low-latency communication (URLLC) in wireless networks. The main associated problems are the CSI acquisition time, which impacts the delay requirements of time-critical applications, and the estimation accuracy, which degrades the signal-to-interference-plus-noise ratio (SINR), thus, reducing reliability. In this work, we form…
▽ More
Channel state information (CSI) is crucial for achieving ultra-reliable low-latency communication (URLLC) in wireless networks. The main associated problems are the CSI acquisition time, which impacts the delay requirements of time-critical applications, and the estimation accuracy, which degrades the signal-to-interference-plus-noise ratio (SINR), thus, reducing reliability. In this work, we formulate and solve a minimum-power precoding design problem simultaneously serving multiple URLLC users in the downlink with imperfect CSI availability. Specifically, we develop an algorithm that exploits state-of-the-art precoding schemes such as the maximal ratio transmission (MRT) and zero-forcing (ZF), and adjust the power of the precoders to compensate for the channel estimation error uncertainty based on the extreme value theory (EVT) framework. Finally, we evaluate the performance of our method and show its superiority concerning worst-case robust precoding, which is used as a benchmark.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Overview of BioASQ 2023: The eleventh BioASQ challenge on Large-Scale Biomedical Semantic Indexing and Question Answering
Authors:
Anastasios Nentidis,
Georgios Katsimpras,
Anastasia Krithara,
Salvador Lima López,
Eulália Farré-Maduell,
Luis Gasco,
Martin Krallinger,
Georgios Paliouras
Abstract:
This is an overview of the eleventh edition of the BioASQ challenge in the context of the Conference and Labs of the Evaluation Forum (CLEF) 2023. BioASQ is a series of international challenges promoting advances in large-scale biomedical semantic indexing and question answering. This year, BioASQ consisted of new editions of the two established tasks b and Synergy, and a new task (MedProcNER) on…
▽ More
This is an overview of the eleventh edition of the BioASQ challenge in the context of the Conference and Labs of the Evaluation Forum (CLEF) 2023. BioASQ is a series of international challenges promoting advances in large-scale biomedical semantic indexing and question answering. This year, BioASQ consisted of new editions of the two established tasks b and Synergy, and a new task (MedProcNER) on semantic annotation of clinical content in Spanish with medical procedures, which have a critical role in medical practice. In this edition of BioASQ, 28 competing teams submitted the results of more than 150 distinct systems in total for the three different shared tasks of the challenge. Similarly to previous editions, most of the participating systems achieved competitive performance, suggesting the continuous advancement of the state-of-the-art in the field.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which c…
▽ More
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.
△ Less
Submitted 9 November, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Differentiable Clustering with Perturbed Spanning Forests
Authors:
Lawrence Stewart,
Francis S Bach,
Felipe Llinares López,
Quentin Berthet
Abstract:
We introduce a differentiable clustering method based on stochastic perturbations of minimum-weight spanning forests. This allows us to include clustering in end-to-end trainable pipelines, with efficient gradients. We show that our method performs well even in difficult settings, such as data sets with high noise and challenging geometries. We also formulate an ad hoc loss to efficiently learn fr…
▽ More
We introduce a differentiable clustering method based on stochastic perturbations of minimum-weight spanning forests. This allows us to include clustering in end-to-end trainable pipelines, with efficient gradients. We show that our method performs well even in difficult settings, such as data sets with high noise and challenging geometries. We also formulate an ad hoc loss to efficiently learn from partial clustering data using this operation. We demonstrate its performance on several data sets for supervised and semi-supervised tasks.
△ Less
Submitted 6 November, 2023; v1 submitted 25 May, 2023;
originally announced May 2023.
-
On CSI-Free Multi-Antenna Schemes for Massive Wireless-Powered Underground Sensor Networks
Authors:
Kaiqiang Lin,
Onel Luis Alcaraz López,
Hirley Alves,
Tong Hao
Abstract:
Radio-frequency wireless energy transfer (WET) is a promising technology to realize wireless-powered underground sensor networks (WPUSNs) and enable sustainable underground monitoring. However, due to the severe attenuation in harsh underground soil and the tight energy budget of the underground sensors, traditional WPUSNs relying on the channel state information (CSI) are highly inefficient, espe…
▽ More
Radio-frequency wireless energy transfer (WET) is a promising technology to realize wireless-powered underground sensor networks (WPUSNs) and enable sustainable underground monitoring. However, due to the severe attenuation in harsh underground soil and the tight energy budget of the underground sensors, traditional WPUSNs relying on the channel state information (CSI) are highly inefficient, especially in massive WET scenarios. To address this challenge, we comparatively assess the feasibility of several state-of-the-art CSI-free multi-antenna WET schemes for WPUSNs, under a given power budget. Moreover, to overcome the extremely low WET efficiency in underground channels, we propose a distributed CSI-free system, where multiple power beacons (PBs) simultaneously charge a large set of underground sensors without any CSI. We consider the position-aware K-Means and the position-agnostic equally-far-from-center (EFFC) approaches for the optimal deployment of the PBs. Our results evince that the performance of the proposed distributed CSI-free system can approach or even surpass that of a traditional full-CSI WET strategy, especially when adopting an appropriate CSI-free scheme, applying the advisable PBs deployment approach, and equipping the PBs with an appropriate number of antennas. Finally, we discuss the impact of underground parameters, i.e., the burial depth of devices and the volumetric water content of soil, on the system's performance, and identify potential challenges and research opportunities for practical distributed CSI-free WPUSNs deployment.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Age-of-Information Dependent Random Access in NOMA-Aided Multiple-Relay Slotted ALOHA
Authors:
Gabriel Germino Martins de Jesus,
João Luiz Rebelatto,
Richard Demo Souza,
Onel Luis Alcaraz López
Abstract:
We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets se…
▽ More
We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets sent by the users are potentially received by the relays, and then forwarded to a common sink in a NOMA fashion by randomly selecting one of the available power levels, and multiple packets are received if all selected levels are unique. We derive analytical expressions for the average AoI of AD-NOMA-MR. Through numerical and simulation results, we show that the proposed policy can improve the average AoI up to 76.6% when compared to a previously proposed AD Orthogonal Multiple Access MR policy.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Performance Analysis of Centralized and Distributed Massive MIMO for MTC
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Leonardo Terças
Abstract:
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and ac…
▽ More
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and academia are working on the evolution from conventional Centralized mMIMO (CmMIMO) to Distributed mMIMO (DmMIMO) architectures for the Sixth Generation (6G) of wireless networks. Under this new paradigm, several Access Points (APs) are distributed in the coverage area, and all jointly cooperate to serve the active devices. Aiming at Machine-Type Communication (MTC) use cases, we compare the performance of CmMIMO and different DmMIMO deployments in an indoor industrial scenario considering regular and alarm traffic patterns for MTC. Our simulation results show that DmMIMO's performance is often superior to CmMIMO. However, the traditional CmMIMO can outperform DmMIMO when the devices' channels are highly correlated.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Privacy-preserving machine learning for healthcare: open challenges and future perspectives
Authors:
Alejandro Guerra-Manzanares,
L. Julian Lechuga Lopez,
Michail Maniatakos,
Farah E. Shamout
Abstract:
Machine Learning (ML) has recently shown tremendous success in modeling various healthcare prediction tasks, ranging from disease diagnosis and prognosis to patient treatment. Due to the sensitive nature of medical data, privacy must be considered along the entire ML pipeline, from model training to inference. In this paper, we conduct a review of recent literature concerning Privacy-Preserving Ma…
▽ More
Machine Learning (ML) has recently shown tremendous success in modeling various healthcare prediction tasks, ranging from disease diagnosis and prognosis to patient treatment. Due to the sensitive nature of medical data, privacy must be considered along the entire ML pipeline, from model training to inference. In this paper, we conduct a review of recent literature concerning Privacy-Preserving Machine Learning (PPML) for healthcare. We primarily focus on privacy-preserving training and inference-as-a-service, and perform a comprehensive review of existing trends, identify challenges, and discuss opportunities for future research directions. The aim of this review is to guide the development of private and efficient ML models in healthcare, with the prospects of translating research efforts into real-world settings.
△ Less
Submitted 27 March, 2023;
originally announced March 2023.
-
TinyML: Tools, Applications, Challenges, and Future Research Directions
Authors:
Rakhee Kallimani,
Krishna Pai,
Prasoon Raghuwanshi,
Sridhar Iyer,
Onel L. A. López
Abstract:
In recent years, Artificial Intelligence (AI) and Machine learning (ML) have gained significant interest from both, industry and academia. Notably, conventional ML techniques require enormous amounts of power to meet the desired accuracy, which has limited their use mainly to high-capability devices such as network nodes. However, with many advancements in technologies such as the Internet of Thin…
▽ More
In recent years, Artificial Intelligence (AI) and Machine learning (ML) have gained significant interest from both, industry and academia. Notably, conventional ML techniques require enormous amounts of power to meet the desired accuracy, which has limited their use mainly to high-capability devices such as network nodes. However, with many advancements in technologies such as the Internet of Things (IoT) and edge computing, it is desirable to incorporate ML techniques into resource-constrained embedded devices for distributed and ubiquitous intelligence. This has motivated the emergence of the TinyML paradigm which is an embedded ML technique that enables ML applications on multiple cheap, resource- and power-constrained devices. However, during this transition towards appropriate implementation of the TinyML technology, multiple challenges such as processing capacity optimization, improved reliability, and maintenance of learning models' accuracy require timely solutions. In this article, various avenues available for TinyML implementation are reviewed. Firstly, a background of TinyML is provided, followed by detailed discussions on various tools supporting TinyML. Then, state-of-art applications of TinyML using advanced technologies are detailed. Lastly, various research challenges and future directions are identified.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
UAV Path Planning Employing MPC- Reinforcement Learning Method Considering Collision Avoidance
Authors:
Mahya Ramezani,
Hamed Habibi,
Jose luis Sanchez Lopez,
Holger Voos
Abstract:
In this paper, we tackle the problem of Unmanned Aerial (UA V) path planning in complex and uncertain environments by designing a Model Predictive Control (MPC), based on a Long-Short-Term Memory (LSTM) network integrated into the Deep Deterministic Policy Gradient algorithm. In the proposed solution, LSTM-MPC operates as a deterministic policy within the DDPG network, and it leverages a predictin…
▽ More
In this paper, we tackle the problem of Unmanned Aerial (UA V) path planning in complex and uncertain environments by designing a Model Predictive Control (MPC), based on a Long-Short-Term Memory (LSTM) network integrated into the Deep Deterministic Policy Gradient algorithm. In the proposed solution, LSTM-MPC operates as a deterministic policy within the DDPG network, and it leverages a predicting pool to store predicted future states and actions for improved robustness and efficiency. The use of the predicting pool also enables the initialization of the critic network, leading to improved convergence speed and reduced failure rate compared to traditional reinforcement learning and deep reinforcement learning methods. The effectiveness of the proposed solution is evaluated by numerical simulations.
△ Less
Submitted 7 March, 2023; v1 submitted 21 February, 2023;
originally announced February 2023.
-
Robust Downlink Multi-Antenna Beamforming with Heterogenous CSI: Enabling eMBB and URLLC Coexistence
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirem…
▽ More
Two of the main problems to achieve ultra-reliable low-latency communications (URLLC) are related to instantaneous channel state information (I-CSI) acquisition and the coexistence with other service modes such as enhanced mobile broadband (eMBB). The former comes from the non-negligible time required for accurate I-CSI acquisition, while the latter, from the heterogeneous and conflicting requirements of different nodes sharing the same network resources. In this paper, we leverage the I-CSI of multiple eMBB links and the channel measurement's history of a URLLC user for multi-antenna beamforming design. Specifically, we propose a precoding design that minimizes the transmit power of a base station (BS) providing eMBB and URLLC services with signal-to-interference-plus-noise ratio (SINR) and outage constraints, respectively, by modifying existing I-CSI-based precoding schemes to account for URLLC channel history information. Moreover, we illustrate and validate the proposed method by adopting zero-forcing (ZF) and the transmit power minimization (TPM) precoding with SINR constraints. We show that the ZF implementation outperforms TPM in adverse channel conditions as in Rayleigh fading, while the situation is rapidly reversed as the channel experiences some line-of-sight (LOS). Finally, we determine the confidence levels at which the target outage probabilities are reached. For instance, we show that outage probabilities below $10^{-3}$ are achievable with more than 99$\%$ confidence for both precoding schemes under favorable LOS conditions with 16 transmit antennas and 500 samples of URLLC channel history.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
A Comprehensive Survey on Spectrum Sharing Techniques for 5G/B5G Intelligent Wireless Networks: Opportunities, Challenges and Future Research Directions
Authors:
Anita Patil,
Sridhar Iyer,
Onel L. A. Lopez,
Rahul J Pandya,
Krishna Pai,
Anshuman Kalla,
Rakhee Kallimani
Abstract:
The increasing popularity of Internet of Everything and small-cell devices has enormously accelerated traffic loads. Consequently, increased bandwidth and high data rate requirements stimulate the operation at the millimeter wave and the Tera-Hertz spectrum bands in the fifth generation (5G) and beyond 5G (B5G) wireless networks. Furthermore, efficient spectrum allocation, maximizing the spectrum…
▽ More
The increasing popularity of Internet of Everything and small-cell devices has enormously accelerated traffic loads. Consequently, increased bandwidth and high data rate requirements stimulate the operation at the millimeter wave and the Tera-Hertz spectrum bands in the fifth generation (5G) and beyond 5G (B5G) wireless networks. Furthermore, efficient spectrum allocation, maximizing the spectrum utilization, achieving efficient spectrum sharing (SS), and managing the spectrum to enhance the system performance remain challenging. To this end, recent studies have implemented artificial intelligence and machine learning techniques, enabling intelligent and efficient spectrum leveraging. However, despite many recent research advances focused on maximizing utilization of the spectrum bands, achieving efficient sharing, allocation, and management of the enormous available spectrum remains challenging. Therefore, the current article acquaints a comprehensive survey on intelligent SS methodologies for 5G and B5G wireless networks, considering the applications of artificial intelligence for efficient SS. Specifically, a thorough overview of SS methodologies is conferred, following which the various spectrum utilization opportunities arising from the existing SS methodologies in intelligent wireless networks are discussed. Subsequently, to highlight critical limitations of the existing methodologies, recent literature on existing SS methodologies is reviewed in detail, classifying them based on the implemented technology, i.e., cognitive radio, machine learning, blockchain, and multiple other techniques. Moreover, the related SS techniques are reviewed to highlight significant challenges in the B5G intelligent wireless network. Finally, to provide an insight into the prospective research avenues, the article is concluded by presenting several potential research directions and proposed solutions.
△ Less
Submitted 17 November, 2022; v1 submitted 16 November, 2022;
originally announced November 2022.
-
BLOOM: A 176B-Parameter Open-Access Multilingual Language Model
Authors:
BigScience Workshop,
:,
Teven Le Scao,
Angela Fan,
Christopher Akiki,
Ellie Pavlick,
Suzana Ilić,
Daniel Hesslow,
Roman Castagné,
Alexandra Sasha Luccioni,
François Yvon,
Matthias Gallé,
Jonathan Tow,
Alexander M. Rush,
Stella Biderman,
Albert Webson,
Pawan Sasanka Ammanamanchi,
Thomas Wang,
Benoît Sagot,
Niklas Muennighoff,
Albert Villanova del Moral,
Olatunji Ruwase,
Rachel Bawden,
Stas Bekman,
Angelina McMillan-Major
, et al. (369 additional authors not shown)
Abstract:
Large language models (LLMs) have been shown to be able to perform new tasks based on a few demonstrations or natural language instructions. While these capabilities have led to widespread adoption, most LLMs are developed by resource-rich organizations and are frequently kept from the public. As a step towards democratizing this powerful technology, we present BLOOM, a 176B-parameter open-access…
▽ More
Large language models (LLMs) have been shown to be able to perform new tasks based on a few demonstrations or natural language instructions. While these capabilities have led to widespread adoption, most LLMs are developed by resource-rich organizations and are frequently kept from the public. As a step towards democratizing this powerful technology, we present BLOOM, a 176B-parameter open-access language model designed and built thanks to a collaboration of hundreds of researchers. BLOOM is a decoder-only Transformer language model that was trained on the ROOTS corpus, a dataset comprising hundreds of sources in 46 natural and 13 programming languages (59 in total). We find that BLOOM achieves competitive performance on a wide variety of benchmarks, with stronger results after undergoing multitask prompted finetuning. To facilitate future research and applications using LLMs, we publicly release our models and code under the Responsible AI License.
△ Less
Submitted 27 June, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Polarization Diversity-enabled LOS/NLOS Identification via Carrier Phase Measurements
Authors:
Onel L. A. López,
Dileep Kumar,
Antti Tölli
Abstract:
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenom…
▽ More
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors.
△ Less
Submitted 15 January, 2023; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Energy-Efficient Wake-Up Signalling for Machine-Type Devices Based on Traffic-Aware Long-Short Term Memory Prediction
Authors:
David E. Ruíz-Guirola,
Carlos A. Rodríguez-López,
Samuel Montejo-Sánchez,
Richard Demo Souza,
Onel L. A. López,
Hirley Alves
Abstract:
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt…
▽ More
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt to the system dynamics. To overcome this, we design a simple but efficient neural network to predict MTC traffic patterns and configure WuS accordingly. Our proposed forecasting WuS (FWuS) leverages an accurate long-short term memory (LSTM)- based traffic prediction that allows extending the sleep time of MTDs by avoiding frequent page monitoring occasions in idle state. Simulation results show the effectiveness of our approach. The traffic prediction errors are shown to be below 4%, being false alarm and miss-detection probabilities respectively below 8.8% and 1.3%. In terms of energy consumption reduction, FWuS can outperform the best benchmark mechanism in up to 32%. Finally, we certify the ability of FWuS to dynamically adapt to traffic density changes, promoting low-power MTC scalability
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Coordinated Pilot Transmissions for Detecting the Signal Sparsity Level in a Massive IoT Network under Rayleigh Fading
Authors:
Onel L. A. López,
Glauber Brante,
Richard D. Souza,
Markku Juntti,
Matti Latva-aho
Abstract:
Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we…
▽ More
Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we introduce a framework relying on coordinated pilot transmissions (CPT) over a short phase at the beginning of the transmission block for detecting $K$ in mMTC scenarios under Rayleigh fading. CPT can be implemented either as: i) U-CPT, which exploits only uplink transmissions, or A-CPT, which includes also downlink transmissions for channel state information (CSI) acquisition that resolve fading uncertainty. We discuss two specific implementations of A-CPT: ii) A-CPT-F, which implements CSI-based phase corrections while leveraging the same statistical inverse power control used by U-CPT, and iii) A-CPT-D, which implements a dynamic CSI-based inverse power control, although it requires some active devices to remain in silence if their corresponding channels are too faded. We derive a signal sparsity level detector for each CPT mechanism by relaxing the original integer detection/classification problem to an estimation problem in the continuous real domain followed by a rounding operation. We show that the variance of the relaxed estimator increases with $K^2$ and $K$ when operating with U-CPT and A-CPT mechanisms, respectively. The distribution of the estimators under U-CPT, A-CPT-F and A-CPT-D is found to follow an exponential, Gaussian, and Student's $t-$like distribution, respectively. Analyses evince the superiority of A-CPT-D, which is also corroborated via numerical results. We reveal several interesting trade-offs and highlight potential research directions.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Beam Search: Faster and Monotonic
Authors:
Sofia Lemons,
Carlos Linares López,
Robert C. Holte,
Wheeler Ruml
Abstract:
Beam search is a popular satisficing approach to heuristic search problems that allows one to trade increased computation time for lower solution cost by increasing the beam width parameter. We make two contributions to the study of beam search. First, we show how to make beam search monotonic; that is, we provide a new variant that guarantees non-increasing solution cost as the beam width is incr…
▽ More
Beam search is a popular satisficing approach to heuristic search problems that allows one to trade increased computation time for lower solution cost by increasing the beam width parameter. We make two contributions to the study of beam search. First, we show how to make beam search monotonic; that is, we provide a new variant that guarantees non-increasing solution cost as the beam width is increased. This makes setting the beam parameter much easier. Second, we show how using distance-to-go estimates can allow beam search to find better solutions more quickly in domains with non-uniform costs. Together, these results improve the practical effectiveness of beam search.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Latency-Aware Multi-antenna SWIPT System with Battery-Constrained Receivers
Authors:
Dileep Kumar,
Onel L. Alcaraz López,
Satya Krishna Joshi,
Antti Tölli
Abstract:
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. T…
▽ More
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of deterministic and independent subproblems, which are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed design to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic mobile access network.
△ Less
Submitted 22 October, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Self-energy recycling for low-power reliable networks: Half-duplex or Full-duplex?
Authors:
Dian Echevarría Pérez,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communicat…
▽ More
Self-energy recycling (sER), which allows transmit energy re-utilization, has emerged as a viable option for improving the energy efficiency (EE) in low-power Internet of Things networks. In this work, we investigate its benefits also in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques in a communication system. We analyze the trade-offs when considering not only the energy spent on transmission but also the circuitry power consumption, thus making the analysis of much more practical interest. In addition to the well known spectral efficiency improvements, results show that FD also outperforms HD in terms of reliability. We show that sER introduces not only benefits in EE matters but also some modifications on how to achieve maximum reliability fairness between uplink and downlink transmissions, which is the main goal in this work. In order to achieve this objective, we propose the use of a dynamic FD scheme where the small base station (SBS) determines the optimal allocation of antennas for transmission and reception. We show the significant improvement gains of this strategy for the system outage probability when compared to the simple HD and FD schemes.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Dynamic RF Combining for Multi-Antenna Ambient Energy Harvesting
Authors:
Onel Luis Alcaraz López,
Bruno Clerckx,
Matti Latva-aho
Abstract:
Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify th…
▽ More
Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify the attainable performance gains via three simple phase shifts' exploration mechanisms, namely, brute force (BF), sequential testing (ST) and codebook based (CB). Among the proposed mechanisms, BF demands the highest power consumption, while CB requires the highest-resolution phase shifters, thus tipping the scales in favor of ST. Finally, we show that the performance gains of ST over a rigid RF combining scheme increase with the number of receive antennas and energy transmitters' deployment density.
△ Less
Submitted 6 December, 2021; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Massive Wireless Energy Transfer with Multiple Power Beacons for very large Internet of Things
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Richard D. Souza,
Samuel Montejo-Sánchez
Abstract:
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering…
▽ More
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering massive IoT networks, thus eliminating the need for frequent battery replacement by using the so-called power beacons (PBs). In this paper, we provide a framework for minimizing the sum transmit power of the PBs using devices' positions information and their current battery state. Our strategy aims to reduce the PBs' power consumption and to mitigate the possible impact of the electromagnetic radiation on human health. We also present analytical insights for the case of very distant clusters and evaluate their applicability. Numerical results show that our proposed framework reduces the outage probability as the number of PBs and/or the energy demands increase.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer
Authors:
Onel L. A. López,
Dileep Kumar,
Richard Demo Souza,
Petar Popovski,
Antti Tölli,
Matti Latva-aho
Abstract:
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approx…
▽ More
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.
△ Less
Submitted 28 February, 2022; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Massive Wireless Energy Transfer with Statistical CSI Beamforming
Authors:
Francisco A. Monteiro,
Onel L. A. López,
Hirley Alves
Abstract:
Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clu…
▽ More
Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clustered, some degree of spatial correlation between their channels to the base station (BS) is expected to occur. The paper considers a massive antenna array at the BS for WET that only has access to i) the first and second order statistics of the Rician channel component of the multiple-input multiple-output (MIMO) channel and also to ii) the line-of-sight MIMO component. The optimal precoding scheme that maximizes the total energy available to the single-antenna devices is derived considering a continuous alphabet for the precoders, permitting any modulated or deterministic waveform. This may lead to some devices in the clusters being assigned a low fraction of the total available power in the cluster, creating a rather uneven situation among them. Consequently, a fairness criterion is introduced, imposing a minimum amount of power allocated to the terminals. A piece-wise linear harvesting circuit is considered at the terminals, with both saturation and a minimum sensitivity, and a constrained version of the precoder is also proposed by solving a non-linear programming problem. A paramount benefit of the constrained precoder is the encompassment of fairness in the power allocation to the different clusters. Moreover, given the polynomial complexity increase of the proposed unconstrained precoder, and the observed linear gain of the system's available sum-power with an increasing number of antennas at the ULA, the use of massive antenna arrays is desirable.
△ Less
Submitted 11 July, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
CSI-free Rotary Antenna Beamforming for Massive RF Wireless Energy Transfer
Authors:
Onel L. A. López,
Hirley Alves,
Samuel Montejo-Sánchez,
Richard D. Souza,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting…
▽ More
Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting (EH) IoT nodes from participating in large-scale time/power-consuming CSI training, but still enable some transmit spatial gains. In this paper, we take another step forward by proposing a novel CSI-free rotary antenna beamforming (RAB) WET scheme that outperforms all state-of-the-art CSI-free schemes in a scenario where a power beacon (PB) equipped with a uniform linear array (ULA) powers a large set of surrounding EH IoT devices. RAB uses a properly designed CSI-free beamformer combined with a continuous or periodic rotation of the ULA at the PB to provide average EH gains that scale as $0.85\sqrt{M}$, where $M$ is the number of PB's antenna elements. Moreover, a rotation-specific power control mechanism was proposed to i) fairly optimize the WET process if devices' positioning information is available, and/or ii) to avoid hazards to human health in terms of specific absorption rate (SAR). We show that RAB performance even approaches quickly (or surpasses, for scenarios with sufficiently large number of EH devices, or when using the proposed power control) the performance of a traditional full-CSI based transmit scheme, and it is also less sensitive to SAR constraints. Finally, we discuss important practicalities related to RAB such as its robustness against non line-of-sight conditions compared to other CSI-free WET schemes, and its generalizability to scenarios where the PB uses other than a ULA topology.
△ Less
Submitted 27 August, 2021; v1 submitted 26 April, 2021;
originally announced April 2021.
-
The State-of-Practice in Requirements Elicitation: An Extended Interview Study at 12 Companies
Authors:
Cristina Palomares,
Xavier Franch,
Carme Quer,
Panagiota Chatzipetrou,
Lidia López,
Tony Gorschek
Abstract:
Context. Requirements engineering remains a discipline that is faced with a large number of challenges, including the implementation of a requirements elicitation process in industry. Although several proposals have been suggested by researchers and academics, little is known of the practices that are actually followed in industry. Objective. We investigate the SoTA with respect to requirements el…
▽ More
Context. Requirements engineering remains a discipline that is faced with a large number of challenges, including the implementation of a requirements elicitation process in industry. Although several proposals have been suggested by researchers and academics, little is known of the practices that are actually followed in industry. Objective. We investigate the SoTA with respect to requirements elicitation, examining practitioners' practices. We focus on the techniques, the roles involved, and the challenges associated to the process. Method. We conducted an interview-based survey study involving 24 practitioners from 12 different Swedish IT companies. Results. We found that group interaction techniques, including meetings and workshops, are the most popular type of elicitation techniques that are employed by the practitioners, except in the case of small projects. We noted that customers are frequently involved in the elicitation process, except in the case of market-driven organizations. Technical staff (for example, developers and architects) are more frequently involved in the elicitation process compared to the involvement of business- or strategic staff. Finally, we identified a number of challenges with respect to stakeholders. These challenges include difficulties in understanding and prioritizing their needs. Further, it was noted that requirements instability (i.e., caused by changing needs or priorities) was a predominant challenge. These observations need to be interpreted in the context of the study. Conclusion. The relevant observations regarding the survey participants' experiences should be of interest to the industry; experiences that should be analyzed in the practitioners' context. Researchers may find evidence for the use of academic results in practice, thereby inspiring future theoretical work, as well as further empirical studies in the same area.
△ Less
Submitted 23 February, 2021;
originally announced February 2021.
-
QFL: Data-Driven Feedback Loop to Manage Quality in Agile Development
Authors:
Lidia López,
Alessandra Bagnato,
Antonin Ahbervé,
Xavier Franch
Abstract:
Background: Quality requirements (QRs) describe desired system qualities, playing an important role in the success of software projects. In the context of agile software development (ASD), where the main objective is the fast delivery of functionalities, QRs are often ill-defined and not well addressed during the development process. Software analytics tools help to control quality though the meas…
▽ More
Background: Quality requirements (QRs) describe desired system qualities, playing an important role in the success of software projects. In the context of agile software development (ASD), where the main objective is the fast delivery of functionalities, QRs are often ill-defined and not well addressed during the development process. Software analytics tools help to control quality though the measurement of quality-related software aspects to support decision-makers in the process of QR management. Aim: The goal of this research is to explore the benefits of integrating a concrete software analytics tool, Q-Rapids Tool, to assess software quality and support QR management processes. Method: In the context of a technology transfer project, the Softeam company has integrated Q-Rapids Tool in their development process. We conducted a series of workshops involving Softeam members working in the Modelio product development. Results: We present the Quality Feedback Loop (QFL) process to be integrated in software development processes to control the complete QR life-cycle, from elicitation to validation. As a result of the implementation of QFL in Softeam, Modelio's team members highlight the benefits of integrating a data analytics tool with their project planning tool and the fact that project managers can control the whole process making the final decisions. Conclusions: Practitioners can benefit from the integration of software analytics tools as part of their software development toolchain to control software quality. The implementation of QFL promotes quality in the organization and the integration of software analytics and project planning tools also improves the communication between teams.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Ultra-low Latency, Low Energy and Massiveness in the 6G Era via Efficient CSIT-limited Schemes
Authors:
Onel L. A. López,
Nurul H. Mahmood,
Hirley Alves,
Carlos M. Lima,
Matti Latva-aho
Abstract:
Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the…
▽ More
Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the main limitations of CSI at transmitter side (CSIT)-based designs toward the 6G era, assess how to design and use efficient CSIT-limited schemes that allow meeting the new and stringent requirements, and highlight some key research directions. We delve into the ideas of efficiently allocating pilot sequences, relying on statistical CSIT and/or using location-based strategies, and demonstrate viability via a selected use case.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.