-
UAV See, UGV Do: Aerial Imagery and Virtual Teach Enabling Zero-Shot Ground Vehicle Repeat
Authors:
Desiree Fisker,
Alexander Krawciw,
Sven Lilge,
Melissa Greeff,
Timothy D. Barfoot
Abstract:
This paper presents Virtual Teach and Repeat (VirT&R): an extension of the Teach and Repeat (T&R) framework that enables GPS-denied, zero-shot autonomous ground vehicle navigation in untraversed environments. VirT&R leverages aerial imagery captured for a target environment to train a Neural Radiance Field (NeRF) model so that dense point clouds and photo-textured meshes can be extracted. The NeRF…
▽ More
This paper presents Virtual Teach and Repeat (VirT&R): an extension of the Teach and Repeat (T&R) framework that enables GPS-denied, zero-shot autonomous ground vehicle navigation in untraversed environments. VirT&R leverages aerial imagery captured for a target environment to train a Neural Radiance Field (NeRF) model so that dense point clouds and photo-textured meshes can be extracted. The NeRF mesh is used to create a high-fidelity simulation of the environment for piloting an unmanned ground vehicle (UGV) to virtually define a desired path. The mission can then be executed in the actual target environment by using NeRF-derived point cloud submaps associated along the path and an existing LiDAR Teach and Repeat (LT&R) framework. We benchmark the repeatability of VirT&R on over 12 km of autonomous driving data using physical markings that allow a sim-to-real lateral path-tracking error to be obtained and compared with LT&R. VirT&R achieved measured root mean squared errors (RMSE) of 19.5 cm and 18.4 cm in two different environments, which are slightly less than one tire width (24 cm) on the robot used for testing, and respective maximum errors were 39.4 cm and 47.6 cm. This was done using only the NeRF-derived teach map, demonstrating that VirT&R has similar closed-loop path-tracking performance to LT&R but does not require a human to manually teach the path to the UGV in the actual environment.
△ Less
Submitted 22 May, 2025;
originally announced May 2025.
-
Space-Time Continuum: Continuous Shape and Time State Estimation for Flexible Robots
Authors:
Spencer Teetaert,
Sven Lilge,
Jessica Burgner-Kahrs,
Timothy D. Barfoot
Abstract:
This extended abstract introduces a novel method for continuous state estimation of continuum robots. We formulate the estimation problem as a factor-graph optimization problem using a novel Gaussian-process prior that is parameterized over both arclength and time. We use this to introduce the first continuous-time-and-space state estimation method for continuum robots.
This extended abstract introduces a novel method for continuous state estimation of continuum robots. We formulate the estimation problem as a factor-graph optimization problem using a novel Gaussian-process prior that is parameterized over both arclength and time. We use this to introduce the first continuous-time-and-space state estimation method for continuum robots.
△ Less
Submitted 18 September, 2024;
originally announced September 2024.
-
Radar Teach and Repeat: Architecture and Initial Field Testing
Authors:
Xinyuan Qiao,
Alexander Krawciw,
Sven Lilge,
Timothy D. Barfoot
Abstract:
Frequency-modulated continuous-wave (FMCW) scanning radar has emerged as an alternative to spinning LiDAR for state estimation on mobile robots. Radar's longer wavelength is less affected by small particulates, providing operational advantages in challenging environments such as dust, smoke, and fog. This paper presents Radar Teach and Repeat (RT&R): a full-stack radar system for long-term off-roa…
▽ More
Frequency-modulated continuous-wave (FMCW) scanning radar has emerged as an alternative to spinning LiDAR for state estimation on mobile robots. Radar's longer wavelength is less affected by small particulates, providing operational advantages in challenging environments such as dust, smoke, and fog. This paper presents Radar Teach and Repeat (RT&R): a full-stack radar system for long-term off-road robot autonomy. RT&R can drive routes reliably in off-road cluttered areas without any GPS. We benchmark the radar system's closed-loop path-tracking performance and compare it to its 3D LiDAR counterpart. 11.8 km of autonomous driving was completed without interventions using only radar and gyro for navigation. RT&R was evaluated on different routes with progressively less structured scene geometry. RT&R achieved lateral path-tracking root mean squared errors (RMSE) of 5.6 cm, 7.5 cm, and 12.1 cm as the routes became more challenging. On the robot we used for testing, these RMSE values are less than half of the width of one tire (24 cm). These same routes have worst-case errors of 21.7 cm, 24.0 cm, and 43.8 cm. We conclude that radar is a viable alternative to LiDAR for long-term autonomy in challenging off-road scenarios. The implementation of RT&R is open-source and available at: https://github.com/utiasASRL/vtr3.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
A Non-Linear Model Predictive Task-Space Controller Satisfying Shape Constraints for Tendon-Driven Continuum Robots
Authors:
Maximillian Hachen,
Chengnan Shentu,
Sven Lilge,
Jessica Burgner-Kahrs
Abstract:
Tendon-Driven Continuum Robots (TDCRs) have the potential to be used in minimally invasive surgery and industrial inspection, where the robot must enter narrow and confined spaces. We propose a Model Predictive Control (MPC) approach to leverage the non-linear kinematics and redundancy of TDCRs for whole-body collision avoidance, with real-time capabilities for handling inputs at 30Hz. Key to our…
▽ More
Tendon-Driven Continuum Robots (TDCRs) have the potential to be used in minimally invasive surgery and industrial inspection, where the robot must enter narrow and confined spaces. We propose a Model Predictive Control (MPC) approach to leverage the non-linear kinematics and redundancy of TDCRs for whole-body collision avoidance, with real-time capabilities for handling inputs at 30Hz. Key to our method's effectiveness is the integration of a nominal Piecewise Constant Curvature (PCC) model for efficient computation of feasible trajectories, with a local feedback controller to handle modeling uncertainty and disturbances. Our experiments in simulation show that our MPC outperforms conventional Jacobian-based controller in position tracking, particularly under disturbances and user-defined shape constraints, while also allowing the incorporation of control limits. We further validate our method on a hardware prototype, showcasing its potential for enhancing the safety of teleoperation tasks.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
Incorporating Control Inputs in Continuous-Time Gaussian Process State Estimation for Robotics
Authors:
Sven Lilge,
Timothy D. Barfoot
Abstract:
Continuous-time batch state estimation using Gaussian processes is an efficient approach to estimate the trajectories of robots over time. In the past, relatively simple physics-motivated priors have been considered for such approaches, using assumptions such as constant velocity or acceleration. This paper presents an approach to incorporating exogenous control inputs, such as velocity or acceler…
▽ More
Continuous-time batch state estimation using Gaussian processes is an efficient approach to estimate the trajectories of robots over time. In the past, relatively simple physics-motivated priors have been considered for such approaches, using assumptions such as constant velocity or acceleration. This paper presents an approach to incorporating exogenous control inputs, such as velocity or acceleration commands, into the continuous Gaussian process state-estimation framework. It is shown that this approach generalizes across different domains in robotics, making it applicable to both the estimation of continuous-time trajectories for mobile robots and the estimation of quasi-static continuum robot shapes. Results show that incorporating control inputs leads to more informed priors, potentially requiring less measurements and estimation nodes to obtain accurate estimates. This makes the approach particularly useful in situations in which limited sensing is available. For example, in a mobile robot localization experiment with sparse landmark distance measurements and frequent odometry control inputs, our approach provides accurate trajectory estimates with root-mean-square errors around 3-4 cm and 4-5 degrees, even with time intervals up to five seconds between discrete estimation nodes, which significantly reduces computation time.
△ Less
Submitted 7 January, 2025; v1 submitted 2 August, 2024;
originally announced August 2024.
-
FoMo: A Proposal for a Multi-Season Dataset for Robot Navigation in Forêt Montmorency
Authors:
Matěj Boxan,
Alexander Krawciw,
Effie Daum,
Xinyuan Qiao,
Sven Lilge,
Timothy D. Barfoot,
François Pomerleau
Abstract:
In this paper, we propose the FoMo (Forêt Montmorency) dataset: a comprehensive, multi-season data collection. Located in the Montmorency Forest, Quebec, Canada, our dataset will capture a rich variety of sensory data over six distinct trajectories totaling 6 kilometers, repeated through different seasons to accumulate 42 kilometers of recorded data. The boreal forest environment increases the div…
▽ More
In this paper, we propose the FoMo (Forêt Montmorency) dataset: a comprehensive, multi-season data collection. Located in the Montmorency Forest, Quebec, Canada, our dataset will capture a rich variety of sensory data over six distinct trajectories totaling 6 kilometers, repeated through different seasons to accumulate 42 kilometers of recorded data. The boreal forest environment increases the diversity of datasets for mobile robot navigation. This proposed dataset will feature a broad array of sensor modalities, including lidar, radar, and a navigation-grade Inertial Measurement Unit (IMU), against the backdrop of challenging boreal forest conditions. Notably, the FoMo dataset will be distinguished by its inclusion of seasonal variations, such as changes in tree canopy and snow depth up to 2 meters, presenting new challenges for robot navigation algorithms. Alongside, we will offer a centimeter-level accurate ground truth, obtained through Post Processed Kinematic (PPK) Global Navigation Satellite System (GNSS) correction, facilitating precise evaluation of odometry and localization algorithms. This work aims to spur advancements in autonomous navigation, enabling the development of robust algorithms capable of handling the dynamic, unstructured environments characteristic of boreal forests. With a public odometry and localization leaderboard and a dedicated software suite, we invite the robotics community to engage with the FoMo dataset by exploring new frontiers in robot navigation under extreme environmental variations. We seek feedback from the community based on this proposal to make the dataset as useful as possible. For further details and supplementary materials, please visit https://norlab-ulaval.github.io/FoMo-website/.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
LaserSAM: Zero-Shot Change Detection Using Visual Segmentation of Spinning LiDAR
Authors:
Alexander Krawciw,
Sven Lilge,
Timothy D. Barfoot
Abstract:
This paper presents an approach for applying camera perception techniques to spinning LiDAR data. To improve the robustness of long-term change detection from a 3D LiDAR, range and intensity information are rendered into virtual perspectives using a pinhole camera model. Hue-saturation-value image encoding is used to colourize the images by range and near-IR intensity. The LiDAR's active scene ill…
▽ More
This paper presents an approach for applying camera perception techniques to spinning LiDAR data. To improve the robustness of long-term change detection from a 3D LiDAR, range and intensity information are rendered into virtual perspectives using a pinhole camera model. Hue-saturation-value image encoding is used to colourize the images by range and near-IR intensity. The LiDAR's active scene illumination makes it invariant to ambient brightness, which enables night-to-day change detection without additional processing. Using the range-colourized, perspective image allows existing foundation models to detect semantic regions. Specifically, the Segment Anything Model detects semantically similar regions in both a previously acquired map and live view from a path-repeating robot. By comparing the masks in both views, changes in the live scan are detected. Results indicate that the Segment Anything Model accurately captures the shape of arbitrary changes introduced into scenes. The proposed method achieves a segmentation intersection over union of 73.3% when evaluated in unstructured environments and 80.4% when evaluated within the planning corridor. Changes can be detected reliably through day-to-night illumination variations. After pixel-level masks are generated, the one-to-one correspondence with 3D points means that the 2D masks can be used directly to recover the 3D location of the changes. The detected 3D changes are avoided in a closed loop by treating them as obstacles in a local motion planner. Experiments on an unmanned ground vehicle demonstrate the performance of the method.
△ Less
Submitted 29 April, 2024; v1 submitted 15 February, 2024;
originally announced February 2024.
-
State Estimation for Continuum Multi-Robot Systems on SE(3)
Authors:
Sven Lilge,
Timothy D. Barfoot,
Jessica Burgner-Kahrs
Abstract:
In contrast to conventional robots, accurately modeling the kinematics and statics of continuum robots is challenging due to partially unknown material properties, parasitic effects, or unknown forces acting on the continuous body. Consequentially, state estimation approaches that utilize additional sensor information to predict the shape of continuum robots have garnered significant interest. Thi…
▽ More
In contrast to conventional robots, accurately modeling the kinematics and statics of continuum robots is challenging due to partially unknown material properties, parasitic effects, or unknown forces acting on the continuous body. Consequentially, state estimation approaches that utilize additional sensor information to predict the shape of continuum robots have garnered significant interest. This paper presents a novel approach to state estimation for systems with multiple coupled continuum robots, which allows estimating the shape and strain variables of multiple continuum robots in an arbitrary coupled topology. Simulations and experiments demonstrate the capabilities and versatility of the proposed method, while achieving accurate and continuous estimates for the state of such systems, resulting in average end-effector errors of 3.3 mm and 5.02° depending on the sensor setup. It is further shown, that the approach offers fast computation times of below 10 ms, enabling its utilization in quasi-static real-time scenarios with average update rates of 100-200 Hz. An open-source C++ implementation of the proposed state estimation method is made publicly available to the community.
△ Less
Submitted 2 December, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Continuum Robot State Estimation Using Gaussian Process Regression on $SE(3)$
Authors:
Sven Lilge,
Timothy D. Barfoot,
Jessica Burgner-Kahrs
Abstract:
Continuum robots have the potential to enable new applications in medicine, inspection, and countless other areas due to their unique shape, compliance, and size. Excellent progess has been made in the mechanical design and dynamic modelling of continuum robots, to the point that there are some canonical designs, although new concepts continue to be explored. In this paper, we turn to the problem…
▽ More
Continuum robots have the potential to enable new applications in medicine, inspection, and countless other areas due to their unique shape, compliance, and size. Excellent progess has been made in the mechanical design and dynamic modelling of continuum robots, to the point that there are some canonical designs, although new concepts continue to be explored. In this paper, we turn to the problem of state estimation for continuum robots that can been modelled with the common Cosserat rod model. Sensing for continuum robots might comprise external camera observations, embedded tracking coils or strain gauges. We repurpose a Gaussian process (GP) regression approach to state estimation, initially developed for continuous-time trajectory estimation in $SE(3)$. In our case, the continuous variable is not time but arclength and we show how to estimate the continuous shape (and strain) of the robot (along with associated uncertainties) given discrete, noisy measurements of both pose and strain along the length. We demonstrate our approach quantitatively through simulations as well as through experiments. Our evaluations show that accurate and continuous estimates of a continuum robot's shape can be achieved, resulting in average end-effector errors between the estimated and ground truth shape as low as 3.5mm and 0.016$^\circ$ in simulation or 3.3mm and 0.035$^\circ$ for unloaded configurations and 6.2mm and 0.041$^\circ$ for loaded ones during experiments, when using discrete pose measurements.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
