Showing 1–23 of 23 results for author: Korpi, D

Knowledge Graph-Based approach for Sustainable 6G End-to-End System Design

Authors: Akshay Jain, Sylvaine Kerboeuf, Sokratis Barmpounakis, Cristóbal Vinagre Z., Stefan Wendt, Dinh Thai Bui, Pol Alemany, Riccardo Nicolicchia, José María Jorquera Valero, Dani Korpi, Mohammad Hossein Moghaddam, Mikko A. Uusitalo, Patrik Rugeland, Abdelkader Outtagarts, Karthik Upadhya, Panagiotis Demestichas, Raul Muñoz, Manuel Gil Pérez, Daniel Adanza, Ricard Vilalta

Abstract: Previous generations of cellular communication, such as 5G, have been designed with the objective of improving key performance indicators (KPIs) such as throughput, latency, etc. However, to meet the evolving KPI demands as well as the ambitious sustainability targets for the ICT industry, 6G will need to be designed differently. Concretely, 6G will need to consider both the performance and sustai… ▽ More Previous generations of cellular communication, such as 5G, have been designed with the objective of improving key performance indicators (KPIs) such as throughput, latency, etc. However, to meet the evolving KPI demands as well as the ambitious sustainability targets for the ICT industry, 6G will need to be designed differently. Concretely, 6G will need to consider both the performance and sustainability targets for the various use cases it will serve. Moreover, like previous generations, 6G will have various candidate technological enablers, making the design space of the system even more complex. Furthermore, given the subjective nature of the sustainability indicators, in particular social sustainability, there is a significant gap in literature on how technical enablers and 6G System design can be linked to them. Hence, in this article a novel method for 6G end-to-end (E2E) system design based on Knowledge graphs (KG) has been introduced. It considers as its input: the use case KPIs, use case sustainability requirements expressed as Key Values (KV) and KV Indicators (KVIs), the ability of the technological enablers to satisfy these KPIs and KVIs, the 6G system design principles defined in Hexa-X-II project, the maturity of a technological enabler and the dependencies between the various enablers. As part of the KG method, a novel approach for determining the key values a technological enabler addresses, has also been introduced. The effectiveness of the KG method was demonstrated by its application in designing the 6G E2E system for the cooperating mobile robot use case defined in the Hexa-X-II project, where 82 enablers were selected. Lastly, results from proof-of-concept demonstrations for a subset of the selected enablers have also been provided, which reinforce the efficacy of the KG method for designing a sustainable 6G system. △ Less

Submitted 11 July, 2025; originally announced July 2025.

Comments: The paper is submitted to IEEE Open Journal of the Communications Society (IEEE OJCOMS)

MSC Class: 00

Demonstrating Interoperable Channel State Feedback Compression with Machine Learning

Authors: Dani Korpi, Rachel Wang, Jerry Wang, Abdelrahman Ibrahim, Carl Nuzman, Runxin Wang, Kursat Rasim Mestav, Dustin Zhang, Iraj Saniee, Shawn Winston, Gordana Pavlovic, Wei Ding, William J. Hillery, Chenxi Hao, Ram Thirunagari, Jung Chang, Jeehyun Kim, Bartek Kozicki, Dragan Samardzija, Taesang Yoo, Andreas Maeder, Tingfang Ji, Harish Viswanathan

Abstract: Neural network-based compression and decompression of channel state feedback has been one of the most widely studied applications of machine learning (ML) in wireless networks. Various simulation-based studies have shown that ML-based feedback compression can result in reduced overhead and more accurate channel information. However, to the best of our knowledge, there are no real-life proofs of co… ▽ More Neural network-based compression and decompression of channel state feedback has been one of the most widely studied applications of machine learning (ML) in wireless networks. Various simulation-based studies have shown that ML-based feedback compression can result in reduced overhead and more accurate channel information. However, to the best of our knowledge, there are no real-life proofs of concepts demonstrating the benefits of ML-based channel feedback compression in a practical setting, where the user equipment (UE) and base station have no access to each others' ML models. In this paper, we present a novel approach for training interoperable compression and decompression ML models in a confidential manner, and demonstrate the accuracy of the ensuing models using prototype UEs and base stations. The performance of the ML-based channel feedback is measured both in terms of the accuracy of the reconstructed channel information and achieved downlink throughput gains when using the channel information for beamforming. The reported measurement results demonstrate that it is possible to develop an accurate ML-based channel feedback link without having to share ML models between device and network vendors. These results pave the way for a practical implementation of ML-based channel feedback in commercial 6G networks. △ Less

Submitted 26 June, 2025; originally announced June 2025.

Comments: This work has been submitted to the IEEE for possible publication

Refining Neural Activation Patterns for Layer-Level Concept Discovery in Neural Network-Based Receivers

Authors: Marko Tuononen, Duy Vu, Dani Korpi, Vesa Starck, Ville Hautamäki

Abstract: Concept discovery in neural networks often targets individual neurons or human-interpretable features, overlooking distributed layer-wide patterns. We study the Neural Activation Pattern (NAP) methodology, which clusters full-layer activation distributions to identify such layer-level concepts. Applied to visual object recognition and radio receiver models, we propose improved normalization, distr… ▽ More Concept discovery in neural networks often targets individual neurons or human-interpretable features, overlooking distributed layer-wide patterns. We study the Neural Activation Pattern (NAP) methodology, which clusters full-layer activation distributions to identify such layer-level concepts. Applied to visual object recognition and radio receiver models, we propose improved normalization, distribution estimation, distance metrics, and varied cluster selection. In the radio receiver model, distinct concepts did not emerge; instead, a continuous activation manifold shaped by Signal-to-Noise Ratio (SNR) was observed -- highlighting SNR as a key learned factor, consistent with classical receiver behavior and supporting physical plausibility. Our enhancements to NAP improved in-distribution vs. out-of-distribution separation, suggesting better generalization and indirectly validating clustering quality. These results underscore the importance of clustering design and activation manifolds in interpreting and troubleshooting neural network behavior. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: 46 pages, 40 figures, 28 tables, 10 equations, and 5 listings

MSC Class: 68T07 (Primary) 62H30; 94A05 (Secondary) ACM Class: I.2.6; I.5.3; C.2.1

Interpreting Deep Neural Network-Based Receiver Under Varying Signal-To-Noise Ratios

Authors: Marko Tuononen, Dani Korpi, Ville Hautamäki

Abstract: We propose a novel method for interpreting neural networks, focusing on convolutional neural network-based receiver model. The method identifies which unit or units of the model contain most (or least) information about the channel parameter(s) of the interest, providing insights at both global and local levels -- with global explanations aggregating local ones. Experiments on link-level simulatio… ▽ More We propose a novel method for interpreting neural networks, focusing on convolutional neural network-based receiver model. The method identifies which unit or units of the model contain most (or least) information about the channel parameter(s) of the interest, providing insights at both global and local levels -- with global explanations aggregating local ones. Experiments on link-level simulations demonstrate the method's effectiveness in identifying units that contribute most (and least) to signal-to-noise ratio processing. Although we focus on a radio receiver model, the method generalizes to other neural network architectures and applications, offering robust estimation even in high-dimensional settings. △ Less

Submitted 9 January, 2025; v1 submitted 25 September, 2024; originally announced September 2024.

Comments: 7+1 pages, 8 figures, 1 equation

MSC Class: 68T07 ACM Class: I.2.6; C.2.1

Deep Learning-Based Pilotless Spatial Multiplexing

Authors: Dani Korpi, Mikko Honkala, Janne M. J. Huttunen

Abstract: This paper investigates the feasibility of machine learning (ML)-based pilotless spatial multiplexing in multiple-input and multiple-output (MIMO) communication systems. Especially, it is shown that by training the transmitter and receiver jointly, the transmitter can learn such constellation shapes for the spatial streams which facilitate completely blind separation and detection by the simultane… ▽ More This paper investigates the feasibility of machine learning (ML)-based pilotless spatial multiplexing in multiple-input and multiple-output (MIMO) communication systems. Especially, it is shown that by training the transmitter and receiver jointly, the transmitter can learn such constellation shapes for the spatial streams which facilitate completely blind separation and detection by the simultaneously learned receiver. To the best of our knowledge, this is the first time ML-based spatial multiplexing without channel estimation pilots is demonstrated. The results show that the learned pilotless scheme can outperform a conventional pilot-based system by as much as 15-20% in terms of spectral efficiency, depending on the modulation order and signal-to-noise ratio. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: Presented in the 57th Asilomar Conference on Signals, Systems, and Computers

DeepTx: Deep Learning Beamforming with Channel Prediction

Authors: Janne M. J. Huttunen, Dani Korpi, Mikko Honkala

Abstract: Machine learning algorithms have recently been considered for many tasks in the field of wireless communications. Previously, we have proposed the use of a deep fully convolutional neural network (CNN) for receiver processing and shown it to provide considerable performance gains. In this study, we focus on machine learning algorithms for the transmitter. In particular, we consider beamforming and… ▽ More Machine learning algorithms have recently been considered for many tasks in the field of wireless communications. Previously, we have proposed the use of a deep fully convolutional neural network (CNN) for receiver processing and shown it to provide considerable performance gains. In this study, we focus on machine learning algorithms for the transmitter. In particular, we consider beamforming and propose a CNN which, for a given uplink channel estimate as input, outputs downlink channel information to be used for beamforming. The CNN is trained in a supervised manner considering both uplink and downlink transmissions with a loss function that is based on UE receiver performance. The main task of the neural network is to predict the channel evolution between uplink and downlink slots, but it can also learn to handle inefficiencies and errors in the whole chain, including the actual beamforming phase. The provided numerical experiments demonstrate the improved beamforming performance. △ Less

Submitted 12 July, 2022; v1 submitted 16 February, 2022; originally announced February 2022.

Comments: 27 pages, this work has been submitted to the IEEE for possible publication; v2: Fixed typo in author name, v3: a revision

Waveform Learning for Reduced Out-of-Band Emissions Under a Nonlinear Power Amplifier

Authors: Dani Korpi, Mikko Honkala, Janne M. J. Huttunen, Fayçal Ait Aoudia, Jakob Hoydis

Abstract: Machine learning (ML) has shown great promise in optimizing various aspects of the physical layer processing in wireless communication systems. In this paper, we use ML to learn jointly the transmit waveform and the frequency-domain receiver. In particular, we consider a scenario where the transmitter power amplifier is operating in a nonlinear manner, and ML is used to optimize the waveform to mi… ▽ More Machine learning (ML) has shown great promise in optimizing various aspects of the physical layer processing in wireless communication systems. In this paper, we use ML to learn jointly the transmit waveform and the frequency-domain receiver. In particular, we consider a scenario where the transmitter power amplifier is operating in a nonlinear manner, and ML is used to optimize the waveform to minimize the out-of-band emissions. The system also learns a constellation shape that facilitates pilotless detection by the simultaneously learned receiver. The simulation results show that such an end-to-end optimized system can communicate data more accurately and with less out-of-band emissions than conventional systems, thereby demonstrating the potential of ML in optimizing the air interface. To the best of our knowledge, there are no prior works considering the power amplifier induced emissions in an end-to-end learned system. These findings pave the way towards an ML-native air interface, which could be one of the building blocks of 6G. △ Less

Submitted 14 January, 2022; originally announced January 2022.

HybridDeepRx: Deep Learning Receiver for High-EVM Signals

Authors: Jaakko Pihlajasalo, Dani Korpi, Mikko Honkala, Janne M. J. Huttunen, Taneli Riihonen, Jukka Talvitie, Alberto Brihuega, Mikko A. Uusitalo, Mikko Valkama

Abstract: In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the… ▽ More In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Extensive set of numerical results is provided, in the context of 5G NR uplink incorporating also measured terminal power amplifier characteristics. The obtained results show that the proposed receiver system is able to clearly outperform classical linear receivers as well as existing ML receiver approaches, especially when the EVM is high in comparison with modulation order. The proposed ML receiver can thus facilitate pushing the terminal power amplifier (PA) systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage. △ Less

Submitted 30 June, 2021; originally announced June 2021.

Comments: To be presented in the 2021 IEEE International Symposium on Personal, Indoor and Mobile Radio Communications

DeepRx MIMO: Convolutional MIMO Detection with Learned Multiplicative Transformations

Authors: Dani Korpi, Mikko Honkala, Janne M. J. Huttunen, Vesa Starck

Abstract: Recently, deep learning has been proposed as a potential technique for improving the physical layer performance of radio receivers. Despite the large amount of encouraging results, most works have not considered spatial multiplexing in the context of multiple-input and multiple-output (MIMO) receivers. In this paper, we present a deep learning-based MIMO receiver architecture that consists of a Re… ▽ More Recently, deep learning has been proposed as a potential technique for improving the physical layer performance of radio receivers. Despite the large amount of encouraging results, most works have not considered spatial multiplexing in the context of multiple-input and multiple-output (MIMO) receivers. In this paper, we present a deep learning-based MIMO receiver architecture that consists of a ResNet-based convolutional neural network, also known as DeepRx, combined with a so-called transformation layer, all trained together. We propose two novel alternatives for the transformation layer: a maximal ratio combining-based transformation, or a fully learned transformation. The former relies more on expert knowledge, while the latter utilizes learned multiplicative layers. Both proposed transformation layers are shown to clearly outperform the conventional baseline receiver, especially with sparse pilot configurations. To the best of our knowledge, these are some of the first results showing such high performance for a fully learned MIMO receiver. △ Less

Submitted 30 October, 2020; originally announced October 2020.

DeepRx: Fully Convolutional Deep Learning Receiver

Authors: Mikko Honkala, Dani Korpi, Janne M. J. Huttunen

Abstract: Deep learning has solved many problems that are out of reach of heuristic algorithms. It has also been successfully applied in wireless communications, even though the current radio systems are well-understood and optimal algorithms exist for many tasks. While some gains have been obtained by learning individual parts of a receiver, a better approach is to jointly learn the whole receiver. This, h… ▽ More Deep learning has solved many problems that are out of reach of heuristic algorithms. It has also been successfully applied in wireless communications, even though the current radio systems are well-understood and optimal algorithms exist for many tasks. While some gains have been obtained by learning individual parts of a receiver, a better approach is to jointly learn the whole receiver. This, however, often results in a challenging nonlinear problem, for which the optimal solution is infeasible to implement. To this end, we propose a deep fully convolutional neural network, DeepRx, which executes the whole receiver pipeline from frequency domain signal stream to uncoded bits in a 5G-compliant fashion. We facilitate accurate channel estimation by constructing the input of the convolutional neural network in a very specific manner using both the data and pilot symbols. Also, DeepRx outputs soft bits that are compatible with the channel coding used in 5G systems. Using 3GPP-defined channel models, we demonstrate that DeepRx outperforms traditional methods. We also show that the high performance can likely be attributed to DeepRx learning to utilize the known constellation points of the unknown data symbols, together with the local symbol distribution, for improved detection accuracy. △ Less

Submitted 12 January, 2021; v1 submitted 4 May, 2020; originally announced May 2020.

Comments: 32 pages, this work has been submitted to the IEEE for possible publication

Downlink Coverage and Rate Analysis of Low Earth Orbit Satellite Constellations Using Stochastic Geometry

Authors: Niloofar Okati, Taneli Riihonen, Dani Korpi, Ilari Angervuori, Risto Wichman

Abstract: As low Earth orbit (LEO) satellite communication systems are gaining increasing popularity, new theoretical methodologies are required to investigate such networks' performance at large. This is because deterministic and location-based models that have previously been applied to analyze satellite systems are typically restricted to support simulations only. In this paper, we derive analytical expr… ▽ More As low Earth orbit (LEO) satellite communication systems are gaining increasing popularity, new theoretical methodologies are required to investigate such networks' performance at large. This is because deterministic and location-based models that have previously been applied to analyze satellite systems are typically restricted to support simulations only. In this paper, we derive analytical expressions for the downlink coverage probability and average data rate of generic LEO networks, regardless of the actual satellites' locality and their service area geometry. Our solution stems from stochastic geometry, which abstracts the generic networks into uniform binomial point processes. Applying the proposed model, we then study the performance of the networks as a function of key constellation design parameters. Finally, to fit the theoretical modeling more precisely to real deterministic constellations, we introduce the effective number of satellites as a parameter to compensate for the practical uneven distribution of satellites on different latitudes. In addition to deriving exact network performance metrics, the study reveals several guidelines for selecting the design parameters for future massive LEO constellations, e.g., the number of frequency channels and altitude. △ Less

Submitted 5 May, 2020; v1 submitted 28 April, 2020; originally announced April 2020.

Comments: Accepted for publication in the IEEE Transactions on Communications in April 2020

Sum-Rate Analysis and Optimization of Self-Backhauling Based Full-Duplex Radio Access System

Authors: Dani Korpi, Taneli Riihonen, Ashutosh Sabharwal, Mikko Valkama

Abstract: In this article, a radio access system with a self-backhauling full-duplex access node serving legacy half-duplex mobile devices is studied and analyzed. In particular, it is assumed that the access node is using the same center frequency for all the transmissions, meaning that also the backhauling is done using the same frequency resources as the uplink and downlink transmissions. It is further a… ▽ More In this article, a radio access system with a self-backhauling full-duplex access node serving legacy half-duplex mobile devices is studied and analyzed. In particular, it is assumed that the access node is using the same center frequency for all the transmissions, meaning that also the backhauling is done using the same frequency resources as the uplink and downlink transmissions. It is further assumed that the access node has a massive array to facilitate efficient beamforming and self-interference nulling in its own receiver. As a starting point, the signal model for the considered access node is first derived, including all the transmitted and received signals within the cell. This is then used as a basis for obtaining the sum-rate expressions, which depict the overall rates experienced by the mobile users that are served by the access node. In addition, the data rate for the bi-directional backhaul link is also derived, since the access node must be able to backhaul itself wirelessly. The maximum achievable sum-rate is then determined by numerically solving an optimization problem constructed from the data rate expressions. The full-duplex scheme is also compared to two alternative transmission schemes, which perform all or some of the transmissions in half-duplex mode. The results show that the full-duplex capability of the access node is beneficial for maximizing the sum-rate, meaning that a simple half-duplex transmission scheme is typically not optimal. In particular, the highest sum-rate is usually provided by a relay type solution, where the access node acts as a full-duplex relay between the mobiles and the backhaul node. △ Less

Submitted 22 April, 2016; originally announced April 2016.

Comments: 30 pages, submitted for review

Wideband Self-Adaptive RF Cancellation Circuit for Full-Duplex Radio: Operating Principle and Measurements

Authors: Timo Huusari, Yang-Seok Choi, Petteri Liikkanen, Dani Korpi, Shilpa Talwar, Mikko Valkama

Abstract: This paper presents a novel RF circuit architecture for self-interference cancellation in inband full-duplex radio transceivers. The developed canceller is able to provide wideband cancellation with waveform bandwidths in the order of 100 MHz or beyond and contains also self-adaptive or self-healing features enabling automatic tracking of time-varying self-interference channel characteristics. In… ▽ More This paper presents a novel RF circuit architecture for self-interference cancellation in inband full-duplex radio transceivers. The developed canceller is able to provide wideband cancellation with waveform bandwidths in the order of 100 MHz or beyond and contains also self-adaptive or self-healing features enabling automatic tracking of time-varying self-interference channel characteristics. In addition to architecture and operating principle descriptions, we also provide actual RF measurements at 2.4 GHz ISM band demonstrating the achievable cancellation levels with different bandwidths and when operating in different antenna configurations and under low-cost highly nonlinear power amplifier. In a very challenging example with a 100 MHz waveform bandwidth, around 41 dB total cancellation is obtained while the corresponding cancellation figure is close to 60 dB with the more conventional 20 MHz carrier bandwidth. Also, efficient tracking in time-varying reflection scenarios is demonstrated. △ Less

Submitted 10 March, 2015; originally announced March 2015.

Comments: 7 pages, to be presented in 2015 IEEE 81st Vehicular Technology Conference

Full-Duplex Mobile Device - Pushing the Limits

Authors: Dani Korpi, Joose Tamminen, Matias Turunen, Timo Huusari, Yang-Seok Choi, Lauri Anttila, Shilpa Talwar, Mikko Valkama

Abstract: In this article, we address the challenges of transmitter-receiver isolation in \emph{mobile full-duplex devices}, building on shared-antenna based transceiver architecture. Firstly, self-adaptive analog RF cancellation circuitry is required, since the capability to track time-varying self-interference coupling characteristics is of utmost importance in mobile devices. In addition, novel adaptive… ▽ More In this article, we address the challenges of transmitter-receiver isolation in \emph{mobile full-duplex devices}, building on shared-antenna based transceiver architecture. Firstly, self-adaptive analog RF cancellation circuitry is required, since the capability to track time-varying self-interference coupling characteristics is of utmost importance in mobile devices. In addition, novel adaptive nonlinear DSP methods are also required for final self-interference suppression at digital baseband, since mobile-scale devices typically operate under highly nonlinear low-cost RF components. In addition to describing above kind of advanced circuit and signal processing solutions, comprehensive RF measurement results from a complete demonstrator implementation are also provided, evidencing beyond 40~dB of active RF cancellation over an 80 MHz waveform bandwidth with a highly nonlinear transmitter power amplifier. Measured examples also demonstrate the good self-healing characteristics of the developed control loop against fast changes in the coupling channel. Furthermore, when complemented with nonlinear digital cancellation processing, the residual self-interference level is pushed down to the noise floor of the demonstration system, despite the harsh nonlinear nature of the self-interference. These findings indicate that deploying the full-duplex principle can indeed be feasible also in mobile devices, and thus be one potential technology in, e.g., 5G and beyond radio systems. △ Less

Submitted 16 May, 2016; v1 submitted 13 October, 2014; originally announced October 2014.

Comments: 18 pages, submitted for review

Impact of Received Signal on Self-interference Channel Estimation and Achievable Rates in In-band Full-duplex Transceivers

Authors: Dani Korpi, Lauri Anttila, Mikko Valkama

Abstract: In this paper we analyze the effect of the calibration period, or lack of, on self-interference channel estimation in the digital domain of in-band full-duplex radio transceivers. In particular, we consider a scenario where the channel estimation must be performed without a separate calibration period, which means that the received signal of interest will act as an additional noise source from the… ▽ More In this paper we analyze the effect of the calibration period, or lack of, on self-interference channel estimation in the digital domain of in-band full-duplex radio transceivers. In particular, we consider a scenario where the channel estimation must be performed without a separate calibration period, which means that the received signal of interest will act as an additional noise source from the estimation perspective. We will explicitly analyze its effect, and quantify the increase in the parameter estimation variance, or sample size, if similar accuracy for the channel estimate is to be achieved as with a separate calibration period. In addition, we will analyze how the calibration period, or its absence, affects the overall achievable rates. Full waveform simulations are then used to determine the validity of the obtained results, as well as provide numerical results regarding the achievable rates. It is shown that, even though a substantial increase in the parameter sample size is required if there is no calibration period, the achievable rates are still comparable for the two scenarios. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 8 pages, to be presented in the Asilomar Conference on Signals, Systems, and Computers in November 2014

Feasibility of In-band Full-Duplex Radio Transceivers with Imperfect RF Components: Analysis and Enhanced Cancellation Algorithms

Authors: Dani Korpi, Lauri Anttila, Mikko Valkama

Abstract: In this paper we provide an overview regarding the feasibility of in-band full-duplex transceivers under imperfect RF components. We utilize results and findings from the recent research on full-duplex communications, while introducing also transmitter-induced thermal noise into the analysis. This means that the model of the RF impairments used in this paper is the most comprehensive thus far. By… ▽ More In this paper we provide an overview regarding the feasibility of in-band full-duplex transceivers under imperfect RF components. We utilize results and findings from the recent research on full-duplex communications, while introducing also transmitter-induced thermal noise into the analysis. This means that the model of the RF impairments used in this paper is the most comprehensive thus far. By assuming realistic parameter values for the different transceiver components, it is shown that IQ imaging and transmitter-induced nonlinearities are the most significant sources of distortion in in-band full-duplex transceivers, in addition to linear self-interference. Motivated by this, we propose a novel augmented nonlinear digital self-interference canceller that is able to model and hence suppress all the essential transmitter imperfections jointly. This is also verified and demonstrated by extensive waveform simulations. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 7 pages, presented in the CROWNCOM 2014 conference

Journal ref: Proceedings of the 9th International Conference on Cognitive Radio Oriented Wireless Networks and Communications (CROWNCOM), pp. 532-538, June 2014

Modeling and Efficient Cancellation of Nonlinear Self-Interference in MIMO Full-Duplex Transceivers

Authors: Lauri Anttila, Dani Korpi, Emilio Antonio-Rodríguez, Risto Wichman, Mikko Valkama

Abstract: This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addit… ▽ More This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addition to the multipath self-interference propagation channels and the analog RF cancellation stage. The proposed solution is the first cancellation technique in the literature which can handle such a self-interference scenario. It is shown by comprehensive simulations with realistic RF component parameters and with two different PA models to clearly outperform the current state-of-the-art digital self-interference cancellers, and to clearly extend the usable transmit power range. △ Less

Submitted 10 October, 2014; v1 submitted 3 June, 2014; originally announced June 2014.

Comments: 7 pages, 5 figures. To be presented in the 2014 International Workshop on Emerging Technologies for 5G Wireless Cellular Networks

Reference Receiver Based Digital Self-Interference Cancellation in MIMO Full-Duplex Transceivers

Authors: Dani Korpi, Lauri Anttila, Mikko Valkama

Abstract: In this paper we propose and analyze a novel self-interference cancellation structure for in-band MIMO full-duplex transceivers. The proposed structure utilizes reference receiver chains to obtain reference signals for digital self-interference cancellation, which means that all the transmitter-induced nonidealities will be included in the digital cancellation signal. To the best of our knowledge,… ▽ More In this paper we propose and analyze a novel self-interference cancellation structure for in-band MIMO full-duplex transceivers. The proposed structure utilizes reference receiver chains to obtain reference signals for digital self-interference cancellation, which means that all the transmitter-induced nonidealities will be included in the digital cancellation signal. To the best of our knowledge, this type of a structure has not been discussed before in the context of full-duplex transceivers. First, we will analyze the overall achievable performance of the proposed cancellation scheme, while also providing some insight into the possible bottlenecks. We also provide a detailed formulation of the actual cancellation procedure, and perform an analysis into the effect of the received signal of interest on self-interference coupling channel estimation. The achieved performance of the proposed reference receiver based digital cancellation procedure is then assessed and verified with full waveform simulations. The analysis and waveform simulation results show that under practical transmitter RF/analog impairment levels, the proposed reference receiver based cancellation architecture can provide substantially better self-interference suppression than any existing solution, despite deploying only low-complexity linear digital processing. △ Less

Submitted 10 October, 2014; v1 submitted 9 May, 2014; originally announced May 2014.

Comments: 7 pages, 4 figures. To be presented in the 2014 IEEE Broadband Wireless Access Workshop

Widely-Linear Digital Self-Interference Cancellation in Direct-Conversion Full-Duplex Transceiver

Authors: Dani Korpi, Lauri Anttila, Ville Syrjälä, Mikko Valkama

Abstract: This article addresses the modeling and cancellation of self-interference in full-duplex direct-conversion radio transceivers, operating under practical imperfect radio frequency (RF) components. Firstly, detailed self-interference signal modeling is carried out, taking into account the most important RF imperfections, namely transmitter power amplifier nonlinear distortion as well as transmitter… ▽ More This article addresses the modeling and cancellation of self-interference in full-duplex direct-conversion radio transceivers, operating under practical imperfect radio frequency (RF) components. Firstly, detailed self-interference signal modeling is carried out, taking into account the most important RF imperfections, namely transmitter power amplifier nonlinear distortion as well as transmitter and receiver IQ mixer amplitude and phase imbalances. The analysis shows that after realistic antenna isolation and RF cancellation, the dominant self-interference waveform at receiver digital baseband can be modeled through a widely-linear transformation of the original transmit data, opposed to classical purely linear models. Such widely-linear self-interference waveform is physically stemming from the transmitter and receiver IQ imaging, and cannot be efficiently suppressed by classical linear digital cancellation. Motivated by this, novel widely-linear digital self-interference cancellation processing is then proposed and formulated, combined with efficient parameter estimation methods. Extensive simulation results demonstrate that the proposed widely-linear cancellation processing clearly outperforms the existing linear solutions, hence enabling the use of practical low-cost RF front-ends utilizing IQ mixing in full-duplex transceivers. △ Less

Submitted 13 October, 2014; v1 submitted 25 February, 2014; originally announced February 2014.

Comments: IEEE Journal on Selected Areas in Communications, vol. 32, no. 9, pp. 1674-1687, September 2014

Full-Duplex Transceiver System Calculations: Analysis of ADC and Linearity Challenges

Authors: Dani Korpi, Taneli Riihonen, Ville Syrjälä, Lauri Anttila, Mikko Valkama, Risto Wichman

Abstract: Despite the intensive recent research on wireless single-channel full-duplex communications, relatively little is known about the transceiver chain nonidealities of full-duplex devices. In this paper, the effect of nonlinear distortion occurring in the transmitter power amplifier (PA) and the receiver chain is analyzed, alongside with the dynamic range requirements of analog-to-digital converters… ▽ More Despite the intensive recent research on wireless single-channel full-duplex communications, relatively little is known about the transceiver chain nonidealities of full-duplex devices. In this paper, the effect of nonlinear distortion occurring in the transmitter power amplifier (PA) and the receiver chain is analyzed, alongside with the dynamic range requirements of analog-to-digital converters (ADCs). This is done with detailed system calculations, which combine the properties of the individual electronics components to jointly model the complete transceiver chain, including self-interference cancellation. They also quantify the decrease in the dynamic range for the signal of interest caused by self-interference at the analog-to-digital interface. Using these system calculations, we provide comprehensive numerical results for typical transceiver parameters. The analytical results are also confirmed with full waveform simulations. We observe that the nonlinear distortion produced by the transmitter PA is a significant issue in a full-duplex transceiver and, when using cheaper and less linear components, also the receiver chain nonlinearities become considerable. It is also shown that, with digitally-intensive self-interference cancellation, the quantization noise of the ADCs is another significant problem. △ Less

Submitted 4 August, 2014; v1 submitted 15 January, 2014; originally announced January 2014.

Comments: 16 pages, 12 figures

Journal ref: IEEE Transactions on Wireless Communications, vol. 13, no. 7, pp. 3821-3836, July 2014

Analysis of Oscillator Phase-Noise Effects on Self-Interference Cancellation in Full-Duplex OFDM Radio Transceivers

Authors: Ville Syrjala, Mikko Valkama, Lauri Anttila, Taneli Riihonen, Dani Korpi

Abstract: This paper addresses the analysis of oscillator phase-noise effects on the self-interference cancellation capability of full-duplex direct-conversion radio transceivers. Closed-form solutions are derived for the power of the residual self-interference stemming from phase noise in two alternative cases of having either independent oscillators or the same oscillator at the transmitter and receiver c… ▽ More This paper addresses the analysis of oscillator phase-noise effects on the self-interference cancellation capability of full-duplex direct-conversion radio transceivers. Closed-form solutions are derived for the power of the residual self-interference stemming from phase noise in two alternative cases of having either independent oscillators or the same oscillator at the transmitter and receiver chains of the full-duplex transceiver. The results show that phase noise has a severe effect on self-interference cancellation in both of the considered cases, and that by using the common oscillator in upconversion and downconversion results in clearly lower residual self-interference levels. The results also show that it is in general vital to use high quality oscillators in full-duplex transceivers, or have some means for phase noise estimation and mitigation in order to suppress its effects. One of the main findings is that in practical scenarios the subcarrier-wise phase-noise spread of the multipath components of the self-interference channel causes most of the residual phase-noise effect when high amounts of self-interference cancellation is desired. △ Less

Submitted 15 January, 2014; originally announced January 2014.

Comments: Revised manuscript for IEEE Transactions on Wireless Communications, 2014

Advanced Self-interference Cancellation and Multiantenna Techniques for Full-Duplex Radios

Authors: Dani Korpi, Sathya Venkatasubramanian, Taneli Riihonen, Lauri Anttila, Strasdosky Otewa, Clemens Icheln, Katsuyuki Haneda, Sergei Tretyakov, Mikko Valkama, Risto Wichman

Abstract: In an in-band full-duplex system, radios transmit and receive simultaneously in the same frequency band at the same time, providing a radical improvement in spectral efficiency over a half-duplex system. However, in order to design such a system, it is necessary to mitigate the self-interference due to simultaneous transmission and reception, which seriously limits the maximum transmit power of th… ▽ More In an in-band full-duplex system, radios transmit and receive simultaneously in the same frequency band at the same time, providing a radical improvement in spectral efficiency over a half-duplex system. However, in order to design such a system, it is necessary to mitigate the self-interference due to simultaneous transmission and reception, which seriously limits the maximum transmit power of the full-duplex device. Especially, large differences in power levels in the receiver front-end sets stringent requirements for the linearity of the transceiver electronics. We present an advanced architecture for a compact full-duplex multiantenna transceiver combining antenna design with analog and digital cancellation, including both linear and nonlinear signal processing. △ Less

Submitted 14 January, 2014; originally announced January 2014.

Comments: Presented in 47th Annual Asilomar Conference on Signals, Systems, and Computers, 2013

Cancellation of Power Amplifier Induced Nonlinear Self-Interference in Full-Duplex Transceivers

Authors: Lauri Anttila, Dani Korpi, Ville Syrjälä, Mikko Valkama

Abstract: Recently, full-duplex (FD) communications with simultaneous transmission and reception on the same channel has been proposed. The FD receiver, however, suffers from inevitable self-interference (SI) from the much more powerful transmit signal. Analogue radio-frequency (RF) and baseband, as well as digital baseband, cancellation techniques have been proposed for suppressing the SI, but so far most… ▽ More Recently, full-duplex (FD) communications with simultaneous transmission and reception on the same channel has been proposed. The FD receiver, however, suffers from inevitable self-interference (SI) from the much more powerful transmit signal. Analogue radio-frequency (RF) and baseband, as well as digital baseband, cancellation techniques have been proposed for suppressing the SI, but so far most of the studies have failed to take into account the inherent nonlinearities of the transmitter and receiver front-ends. To fill this gap, this article proposes a novel digital nonlinear interference cancellation technique to mitigate the power amplifier (PA) induced nonlinear SI in a FD transceiver. The technique is based on modeling the nonlinear SI channel, which is comprised of the nonlinear PA, the linear multipath SI channel, and the RF SI canceller, with a parallel Hammerstein nonlinearity. Stemming from the modeling, and appropriate parameter estimation, the known transmit data is then processed with the developed nonlinear parallel Hammerstein structure and suppressed from the receiver path at digital baseband. The results illustrate that with a given IIP3 figure for the PA, the proposed technique enables higher transmit power to be used compared to existing linear SI cancellation methods. Alternatively, for a given maximum transmit power level, a lower-quality PA (i.e., lower IIP3) can be used. △ Less

Submitted 14 January, 2014; originally announced January 2014.

Comments: To appear in proceedings of the 2013 Asilomar Conference on Signals, Systems & Computers