-
On the efficiency of explicit and semi-explicit immersed boundary finite element methods for wave propagation problems
Authors:
Tim Bürchner,
Lars Radtke,
Philipp Kopp,
Stefan Kollmannsberger,
Ernst Rank,
Alexander Düster
Abstract:
Immersed boundary methods have attracted substantial interest in the last decades due to their potential for computations involving complex geometries. Often these cannot be efficiently discretized using boundary-fitted finite elements. Immersed boundary methods provide a simple and fully automatic discretization based on Cartesian grids and tailored quadrature schemes that account for the geometr…
▽ More
Immersed boundary methods have attracted substantial interest in the last decades due to their potential for computations involving complex geometries. Often these cannot be efficiently discretized using boundary-fitted finite elements. Immersed boundary methods provide a simple and fully automatic discretization based on Cartesian grids and tailored quadrature schemes that account for the geometric model. It can thus be described independently of the grid, e.g., by image data obtained from computed tomography scans. The drawback of such a discretization lies in the potentially small overlap between certain elements in the grid and the geometry. These badly cut elements with small physical support pose a particular challenge for nonlinear and/or dynamic simulations. In this work, we focus on problems in structural dynamics and acoustics and concentrate on solving them with explicit time-marching schemes. In this context, badly cut elements can lead to unfeasibly small critical time step sizes. We investigate the performance of implicit-explicit time marching schemes and two stabilization methods developed in previous works as potential remedies. While these have been studied before with regard to their effectiveness in increasing the critical time step size, their numerical efficiency has only been considered in terms of accuracy per degree of freedom. In this paper, we evaluate the computation time required for a given accuracy, which depends not only on the number of degrees of freedom but also on the selected spatial discretization, the sparsity patterns of the system matrices, and the employed time-marching scheme.
△ Less
Submitted 31 January, 2025;
originally announced January 2025.
-
Quantitative Comparison of the Total Focusing Method, Reverse Time Migration, and Full Waveform Inversion for Ultrasonic Imaging
Authors:
Tim Bürchner,
Simon Schmid,
Lukas Bergbreiter,
Ernst Rank,
Stefan Kollmannsberger,
Christian U. Grosse
Abstract:
Phased array ultrasound is a widely used technique in non-destructive testing. Using piezoelectric elements as both sources and receivers provides a significant gain in information and enables more accurate defect detection. When all source-receiver combinations are used, the process is called full matrix capture. The total focusing method~(TFM), which exploits such datasets, relies on a delay and…
▽ More
Phased array ultrasound is a widely used technique in non-destructive testing. Using piezoelectric elements as both sources and receivers provides a significant gain in information and enables more accurate defect detection. When all source-receiver combinations are used, the process is called full matrix capture. The total focusing method~(TFM), which exploits such datasets, relies on a delay and sum algorithm to sum up the signals on a pixel grid. However, TFM only uses the first arriving p-waves, making it challenging to size complex-shaped defects. By contrast, more advanced methods such as reverse time migration~(RTM) and full waveform inversion~(FWI) use full waveforms to reconstruct defects. Both methods compare measured signals with ultrasound simulations. While RTM identifies defects by convolving forward and backward wavefields once, FWI iteratively updates material models to reconstruct the actual distribution of material properties. This study compares TFM, RTM, and FWI for six specimens featuring circular defects or Y-shaped notches. The reconstructed results are first evaluated qualitatively using different thresholds and then quantitatively using metrics such as AUPRC, AUROC, and F1-score. The results show that FWI performs best in most cases, both qualitatively and quantitatively.
△ Less
Submitted 10 December, 2024;
originally announced December 2024.
-
Accelerating Full Waveform Inversion By Transfer Learning
Authors:
Divya Shyam Singh,
Leon Herrmann,
Qing Sun,
Tim Bürchner,
Felix Dietrich,
Stefan Kollmannsberger
Abstract:
Full waveform inversion (FWI) is a powerful tool for reconstructing material fields based on sparsely measured data obtained by wave propagation. For specific problems, discretizing the material field with a neural network (NN) improves the robustness and reconstruction quality of the corresponding optimization problem. We call this method NN-based FWI. Starting from an initial guess, the weights…
▽ More
Full waveform inversion (FWI) is a powerful tool for reconstructing material fields based on sparsely measured data obtained by wave propagation. For specific problems, discretizing the material field with a neural network (NN) improves the robustness and reconstruction quality of the corresponding optimization problem. We call this method NN-based FWI. Starting from an initial guess, the weights of the NN are iteratively updated to fit the simulated wave signals to the sparsely measured data set. For gradient-based optimization, a suitable choice of the initial guess, i.e., a suitable NN weight initialization, is crucial for fast and robust convergence.
In this paper, we introduce a novel transfer learning approach to further improve NN-based FWI. This approach leverages supervised pretraining to provide a better NN weight initialization, leading to faster convergence of the subsequent optimization problem. Moreover, the inversions yield physically more meaningful local minima. The network is pretrained to predict the unknown material field using the gradient information from the first iteration of conventional FWI. In our computational experiments on two-dimensional domains, the training data set consists of reference simulations with arbitrarily positioned elliptical voids of different shapes and orientations. We compare the performance of the proposed transfer learning NN-based FWI with three other methods: conventional FWI, NN-based FWI without pretraining and conventional FWI with an initial guess predicted from the pretrained NN. Our results show that transfer learning NN-based FWI outperforms the other methods in terms of convergence speed and reconstruction quality.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Neural Networks for Generating Better Local Optima in Topology Optimization
Authors:
Leon Herrmann,
Ole Sigmund,
Viola Muning Li,
Christian Vogl,
Stefan Kollmannsberger
Abstract:
Neural networks have recently been employed as material discretizations within adjoint optimization frameworks for inverse problems and topology optimization. While advantageous regularization effects and better optima have been found for some inverse problems, the benefit for topology optimization has been limited -- where the focus of investigations has been the compliance problem. We demonstrat…
▽ More
Neural networks have recently been employed as material discretizations within adjoint optimization frameworks for inverse problems and topology optimization. While advantageous regularization effects and better optima have been found for some inverse problems, the benefit for topology optimization has been limited -- where the focus of investigations has been the compliance problem. We demonstrate how neural network material discretizations can, under certain conditions, find better local optima in more challenging optimization problems, where we here specifically consider acoustic topology optimization. The chances of identifying a better optimum can significantly be improved by running multiple partial optimizations with different neural network initializations. Furthermore, we show that the neural network material discretization's advantage comes from the interplay with the Adam optimizer and emphasize its current limitations when competing with constrained and higher-order optimization techniques. At the moment, this discretization has only been shown to be beneficial for unconstrained first-order optimization.
△ Less
Submitted 25 July, 2024;
originally announced July 2024.
-
The Discontinuous Strain Method: accurately representing fatigue and failure
Authors:
Leon Herrmann,
Alireza Daneshyar,
Stefan Kollmannsberger
Abstract:
Fatigue simulation requires accurate modeling of unloading and reloading. However, classical ductile damage models treat deformations after complete failure as irrecoverable -- which leads to unphysical behavior during unloading. This unphysical behavior stems from the continued accumulation of plastic strains after failure, resulting in an incorrect stress state at crack closure. As a remedy, we…
▽ More
Fatigue simulation requires accurate modeling of unloading and reloading. However, classical ductile damage models treat deformations after complete failure as irrecoverable -- which leads to unphysical behavior during unloading. This unphysical behavior stems from the continued accumulation of plastic strains after failure, resulting in an incorrect stress state at crack closure. As a remedy, we introduce a discontinuity strain in the additive elasto-plastic strain decomposition, which absorbs the excess strain after failure. This allows representing pre- and post-cracking regimes in a fully continuous setting, wherein the transition from the elasto-plastic response to cracking can be triggered at any arbitrary stage in a completely smooth manner. Moreover, the presented methodology does not exhibit the spurious energy release observed in hybrid approaches. In addition, our approach guarantees mesh-independent results by relying on a characteristic length scale -- based on the discretization's resolution. We name this new methodology the discontinuous strain method. The proposed approach requires only minor modifications of conventional plastic-damage routines. To convey the method in a didactic manner, the algorithmic modifications are first discussed for one- and subsequently for two-/three-dimensional implementations. Using a simple ductile constitutive model, the discontinuous strain method is validated against established two-dimensional benchmarks. The method is, however, independent of the employed constitutive model. Elastic, plastic, and damage models may thus be chosen arbitrarily. Furthermore, computational efforts associated with the method are minimal, rendering it advantageous for accurately representing low-cycle fatigue but potentially also for other scenarios requiring a discontinuity representation within a plastic-damage framework.
△ Less
Submitted 5 December, 2023; v1 submitted 1 December, 2023;
originally announced December 2023.
-
Implicit-Explicit Time Integration for the Immersed Wave Equation
Authors:
Christian Faßbender,
Tim Bürchner,
Philipp Kopp,
Ernst Rank,
Stefan Kollmannsberger
Abstract:
Immersed boundary methods simplify mesh generation by embedding the domain of interest into an extended domain that is easy to mesh, introducing the challenge of dealing with cells that intersect the domain boundary. Combined with explicit time integration schemes, the finite cell method introduces a lower bound for the critical time step size. Explicit transient analyses commonly use the spectral…
▽ More
Immersed boundary methods simplify mesh generation by embedding the domain of interest into an extended domain that is easy to mesh, introducing the challenge of dealing with cells that intersect the domain boundary. Combined with explicit time integration schemes, the finite cell method introduces a lower bound for the critical time step size. Explicit transient analyses commonly use the spectral element method due to its natural way of obtaining diagonal mass matrices through nodal lumping. Its combination with the finite cell method is called the spectral cell method. Unfortunately, a direct application of nodal lumping in the spectral cell method is impossible due to the special quadrature necessary to treat the discontinuous integrand inside the cut cells. We analyze an implicit-explicit (IMEX) time integration method to exploit the advantages of the nodal lumping scheme for uncut cells on one side and the unconditional stability of implicit time integration schemes for cut cells on the other. In this hybrid, immersed Newmark IMEX approach, we use explicit second-order central differences to integrate the uncut degrees of freedom that lead to a diagonal block in the mass matrix and an implicit trapezoidal Newmark method to integrate the remaining degrees of freedom (those supported by at least one cut cell). The immersed Newmark IMEX approach preserves the high-order convergence rates and the geometric flexibility of the finite cell method. We analyze a simple system of spring-coupled masses to highlight some of the essential characteristics of Newmark IMEX time integration. We then solve the scalar wave equation on two- and three-dimensional examples with significant geometric complexity to show that our approach is more efficient than state-of-the-art time integration schemes when comparing accuracy and runtime.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Deep Learning in Deterministic Computational Mechanics
Authors:
Leon Herrmann,
Stefan Kollmannsberger
Abstract:
The rapid growth of deep learning research, including within the field of computational mechanics, has resulted in an extensive and diverse body of literature. To help researchers identify key concepts and promising methodologies within this field, we provide an overview of deep learning in deterministic computational mechanics. Five main categories are identified and explored: simulation substitu…
▽ More
The rapid growth of deep learning research, including within the field of computational mechanics, has resulted in an extensive and diverse body of literature. To help researchers identify key concepts and promising methodologies within this field, we provide an overview of deep learning in deterministic computational mechanics. Five main categories are identified and explored: simulation substitution, simulation enhancement, discretizations as neural networks, generative approaches, and deep reinforcement learning. This review focuses on deep learning methods rather than applications for computational mechanics, thereby enabling researchers to explore this field more effectively. As such, the review is not necessarily aimed at researchers with extensive knowledge of deep learning -- instead, the primary audience is researchers at the verge of entering this field or those who attempt to gain an overview of deep learning in computational mechanics. The discussed concepts are, therefore, explained as simple as possible.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
From ductile damage to unilateral contact via point-wise implicit discontinuity at the infinitesimal element level
Authors:
Alireza Daneshyar,
Leon Herrmann,
Stefan Kollmannsberger
Abstract:
Ductile damage models and cohesive laws incorporate the material plasticity entailing the growth of irrecoverable deformations even after complete failure. This unrealistic growth remains concealed until the unilateral effects arising from the crack closure emerge. We address this issue by proposing a new strategy to cope with the entire process of failure, from the very inception in the form of d…
▽ More
Ductile damage models and cohesive laws incorporate the material plasticity entailing the growth of irrecoverable deformations even after complete failure. This unrealistic growth remains concealed until the unilateral effects arising from the crack closure emerge. We address this issue by proposing a new strategy to cope with the entire process of failure, from the very inception in the form of diffuse damage to the final stage, i.e. the emergence of sharp cracks. To this end, we introduce a new strain field, termed discontinuity strain, to the conventional additive strain decomposition to account for discontinuities in a continuous sense so that the standard principle of virtual work applies. We treat this strain field similar to a strong discontinuity, yet without introducing new kinematic variables and nonlinear boundary conditions. In this paper, we demonstrate the effectiveness of this new strategy at a simple ductile damage constitutive model. The model uses a scalar damage index to control the degradation process. The discontinuity strain field is injected into the strain decomposition if this damage index exceeds a certain threshold. The threshold corresponds to the limit at which the induced imperfections merge and form a discrete crack. With three-point bending tests under pure mode I and mixed-mode conditions, we demonstrate that this augmentation does not show the early crack closure artifact which is wrongly predicted by plastic damage formulations at load reversal. We also use the concrete damaged plasticity model provided in Abaqus commercial finite element program for our comparison. Lastly, a high-intensity low-cycle fatigue test demonstrates the unilateral effects resulting from the complete closure of the induced crack.
△ Less
Submitted 1 December, 2023; v1 submitted 24 June, 2023;
originally announced June 2023.
-
Isogeometric Multi-Resolution Full Waveform Inversion based on the Finite Cell Method
Authors:
Tim Bürchner,
Philipp Kopp,
Stefan Kollmannsberger,
Ernst Rank
Abstract:
Full waveform inversion (FWI) is an iterative identification process that serves to minimize the misfit of model-based simulated and experimentally measured wave field data, with the goal of identifying a field of parameters for a given physical object. The inverse optimization process of FWI is based on forward and backward solutions of the (elastic or acoustic) eave equation. In a previous paper…
▽ More
Full waveform inversion (FWI) is an iterative identification process that serves to minimize the misfit of model-based simulated and experimentally measured wave field data, with the goal of identifying a field of parameters for a given physical object. The inverse optimization process of FWI is based on forward and backward solutions of the (elastic or acoustic) eave equation. In a previous paper [1], we explored opportunities of using the finite cell method (FCM) as the wave field solver to incorporate highly complex geometric models. Furthermore, we demonstrated that the identification of the model's density outperforms that of the velocity -- particularly in cases where unknown voids characterized by homogeneous Neumann boundary conditions need to be detected. The paper at hand extends this previous study: The isogeometric finite cell analysis (IGA-FCM) -- a combination of isogeometric analysis (IGA) and FCM -- is applied for the wave field solver, with the advantage that the polynomial degree and subsequently also the sampling frequency of the wave field can be increased quite easily. Since the inversion efficiency strongly depends on the accuracy of the forward and backward wave field solution and of the gradient of the functional, consistent and lumped mass matrix discretization are compared. The resolution of the grid describing the unknown material density is the decouple from the knot span grid. Finally, we propose an adaptive multi-resolution algorithm that refines the material grid only locally using an image processing-based refinement indicator. The developed inversion framework allows fast and memory-efficient wave simulation and object identification. While we study the general behavior of the proposed approach on 2D benchmark problems, a final 3D problem shows that it can also be used to identify voids in geometrically complex spatial structures.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
On the Use of Neural Networks for Full Waveform Inversion
Authors:
Leon Herrmann,
Tim Bürchner,
Felix Dietrich,
Stefan Kollmannsberger
Abstract:
Neural networks have recently gained attention in solving inverse problems. One prominent methodology are Physics-Informed Neural Networks (PINNs) which can solve both forward and inverse problems. In the paper at hand, full waveform inversion is the considered inverse problem. The performance of PINNs is compared against classical adjoint optimization, focusing on three key aspects: the forward-s…
▽ More
Neural networks have recently gained attention in solving inverse problems. One prominent methodology are Physics-Informed Neural Networks (PINNs) which can solve both forward and inverse problems. In the paper at hand, full waveform inversion is the considered inverse problem. The performance of PINNs is compared against classical adjoint optimization, focusing on three key aspects: the forward-solver, the neural network Ansatz for the inverse field, and the sensitivity computation for the gradient-based minimization. Starting from PINNs, each of these key aspects is adapted individually until the classical adjoint optimization emerges. It is shown that it is beneficial to use the neural network only for the discretization of the unknown material field, where the neural network produces reconstructions without oscillatory artifacts as typically encountered in classical full waveform inversion approaches. Due to this finding, a hybrid approach is proposed. It exploits both the efficient gradient computation with the continuous adjoint method as well as the neural network Ansatz for the unknown material field. This new hybrid approach outperforms Physics-Informed Neural Networks and the classical adjoint optimization in settings of two and three-dimensional examples.
△ Less
Submitted 30 January, 2023;
originally announced March 2023.
-
Transfer Learning Enhanced Full Waveform Inversion
Authors:
Stefan Kollmannsberger,
Divya Singh,
Leon Herrmann
Abstract:
We propose a way to favorably employ neural networks in the field of non-destructive testing using Full Waveform Inversion (FWI). The presented methodology discretizes the unknown material distribution in the domain with a neural network within an adjoint optimization. To further increase efficiency of the FWI, pretrained neural networks are used to provide a good starting point for the inversion.…
▽ More
We propose a way to favorably employ neural networks in the field of non-destructive testing using Full Waveform Inversion (FWI). The presented methodology discretizes the unknown material distribution in the domain with a neural network within an adjoint optimization. To further increase efficiency of the FWI, pretrained neural networks are used to provide a good starting point for the inversion. This reduces the number of iterations in the Full Waveform Inversion for specific, yet generalizable settings.
△ Less
Submitted 1 December, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
Two-scale analysis and design of spaceframes with complex additive manufactured nodes
Authors:
Oguz Oztoprak,
Alexander Paolini,
Pierluigi D'Acunto,
Ernst Rank,
Stefan Kollmannsberger
Abstract:
The advancements in additive manufacturing (AM) technology have allowed for the production of geometrically complex parts with customizable designs. This versatility benefits large-scale space-frame structures, as the individual design of each structural node can be tailored to meet specific mechanical and other functional requirements. To this end, however, the design and analysis of such space-f…
▽ More
The advancements in additive manufacturing (AM) technology have allowed for the production of geometrically complex parts with customizable designs. This versatility benefits large-scale space-frame structures, as the individual design of each structural node can be tailored to meet specific mechanical and other functional requirements. To this end, however, the design and analysis of such space-frames with distinct structural nodes needs to be highly automated. A critical aspect in this context is automated integration of the local 3D features into the 1D large-scale models. In the present work, a two-scale modeling approach is developed to improve the design and linear-elastic analysis of space frames with complex additively manufactured nodes. The mechanical characteristics of the 3D nodes are numerically reduced through an automated dimensional reduction process based on the Finite Cell Method (FCM) and substructuring. The reduced stiffness quantities are assembled in the large-scale 1D model which, in turn, enables efficient structural analysis. The response of the 1D model is passed on to the local model, enabling fully resolved 3D linear-elastic analysis. The proposed approach is numerically verified on a simplified beam example. Furthermore, the workflow is demonstrated on a tree canopy structure with additively manufactured nodes with bolted connections. The form of the large-scale structure is found based on the Combinatorial Equilibrium Modeling framework, and the different designs of the local structural nodes are based on generative exploration of the design space. It is demonstrated that the proposed methodology effectively automates the design and analysis of space-frame structures with complex, distinct structural nodes.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
Immersed boundary parametrizations for full waveform inversion
Authors:
Tim Bürchner,
Philipp Kopp,
Stefan Kollmannsberger,
Ernst Rank
Abstract:
Full Waveform Inversion (FWI) is a successful and well-established inverse method for reconstructing material models from measured wave signals. In the field of seismic exploration, FWI has proven particularly successful in the reconstruction of smoothly varying material deviations. In contrast, non-destructive testing (NDT) often requires the detection and specification of sharp defects in a spec…
▽ More
Full Waveform Inversion (FWI) is a successful and well-established inverse method for reconstructing material models from measured wave signals. In the field of seismic exploration, FWI has proven particularly successful in the reconstruction of smoothly varying material deviations. In contrast, non-destructive testing (NDT) often requires the detection and specification of sharp defects in a specimen. If the contrast between materials is low, FWI can be successfully applied to these problems as well. However, so far the method is not fully suitable to image defects such as voids, which are characterized by a high contrast in the material parameters. In this paper, we introduce a dimensionless scaling function $γ$ to model voids in the forward and inverse scalar wave equation problem. Depending on which material parameters this function $γ$ scales, different modeling approaches are presented, leading to three formulations of mono-parameter FWI and one formulation of two-parameter FWI. The resulting problems are solved by first-order optimization, where the gradient is computed by an ajdoint state method. The corresponding Fréchet kernels are derived for each approach and the associated minimization is performed using an L-BFGS algorithm. A comparison between the different approaches shows that scaling the density with $γ$ is most promising for parameterizing voids in the forward and inverse problem. Finally, in order to consider arbitrary complex geometries known a priori, this approach is combined with an immersed boundary method, the finite cell method (FCM).
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
A three-field phase-field model for mixed-mode fracture in rock based on experimental determination of the mode II fracture toughness
Authors:
Lisa Hug,
Martin Potten,
Georg Stockinger,
Kurosch Thuro,
Stefan Kollmannsberger
Abstract:
In this contribution, a novel framework for simulating mixed-mode failure in rock is presented. Based on a hybrid phase-field model for mixed-mode fracture, separate phase-field variables are introduced for tensile (mode I) and shear (mode II) fracture. The resulting three-field problem features separate length scale parameters for mode I and mode II cracks. In contrast to the classic two-field mi…
▽ More
In this contribution, a novel framework for simulating mixed-mode failure in rock is presented. Based on a hybrid phase-field model for mixed-mode fracture, separate phase-field variables are introduced for tensile (mode I) and shear (mode II) fracture. The resulting three-field problem features separate length scale parameters for mode I and mode II cracks. In contrast to the classic two-field mixed-mode approaches it can thus account for different tensile and shear strength of rock. The two phase-field equations are implicitly coupled through the degradation of the material in the elastic equation, and the three fields are solved using a staggered iteration scheme. For its validation, the three-field model is calibrated for two types of rock, Solnhofen Limestone and Pfraundorfer Dolostone. To this end, double-edge notched Brazilian disk (DNBD) tests are performed to determine the mode II fracture toughness. The numerical results demonstrate that the proposed phase-field model is able to reproduce the different crack patterns observed in the DNBD tests. A final example of a uniaxial compression test on a rare drill core demonstrates, that the proposed model is able to capture complex, 3D mixed-mode crack patterns when calibrated with the correct mode I and mode II fracture toughness.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
Quantitative reconstruction of defects in multi-layered bonded composites using fully convolutional network-based ultrasonic inversion
Authors:
Jing Rao,
Fangshu Yang,
Huadong Mo,
Stefan Kollmannsberger,
Ernst Rank
Abstract:
Ultrasonic methods have great potential applications to detect and characterize defects in multi-layered bonded composites. However, it remains challenging to quantitatively reconstruct defects, such as disbonds and kissing bonds, that influence the integrity of adhesive bonds and seriously reduce the strength of assemblies. In this work, an ultrasonic method based on the supervised fully convolut…
▽ More
Ultrasonic methods have great potential applications to detect and characterize defects in multi-layered bonded composites. However, it remains challenging to quantitatively reconstruct defects, such as disbonds and kissing bonds, that influence the integrity of adhesive bonds and seriously reduce the strength of assemblies. In this work, an ultrasonic method based on the supervised fully convolutional network (FCN) is proposed to quantitatively reconstruct defects hidden in multi-layered bonded composites. In the training process of this method, an FCN establishes a non-linear mapping from measured ultrasonic data to the corresponding velocity models of multi-layered bonded composites. In the predicting process, the trained network obtained from the training process is used to directly reconstruct the velocity models from the new measured ultrasonic data of adhesively bonded composites. The presented FCN-based inversion method can automatically extract useful features in multi-layered composites. Although this method is computationally expensive in the training process, the prediction itself in the online phase takes only seconds. The numerical results show that the FCN-based ultrasonic inversion method is capable to accurately reconstruct ultrasonic velocity models of the high contrast defects, which has great potential for online detection of adhesively bonded composites.
△ Less
Submitted 11 September, 2021;
originally announced September 2021.
-
Uncertainty quantification of microstructure variability and mechanical behaviour of additively manufactured lattice structures
Authors:
Nina Korshunova,
Iason Papaioannou,
Stefan Kollmannsberger,
Daninel Straub,
Ernst Rank
Abstract:
Process-induced defects are the leading cause of discrepancies between as-designed and as-manufactured additive manufacturing (AM) product behavior. Especially for metal lattices, the variations in the printed geometry cannot be neglected. Therefore, the evaluation of the influence of microstructural variability on their mechanical behavior is crucial for the quality assessment of the produced str…
▽ More
Process-induced defects are the leading cause of discrepancies between as-designed and as-manufactured additive manufacturing (AM) product behavior. Especially for metal lattices, the variations in the printed geometry cannot be neglected. Therefore, the evaluation of the influence of microstructural variability on their mechanical behavior is crucial for the quality assessment of the produced structures. Commonly, the as-manufactured geometry can be obtained by computed tomography (CT). However, to incorporate all process-induced defects into the numerical analysis is often computationally demanding. Thus, commonly this task is limited to a predefined set of considered variations, such as strut size or strut diameter. In this work, a CT-based binary random field is proposed to generate statistically equivalent geometries of periodic metal lattices. The proposed random field model in combination with the Finite Cell Method (FCM), an immersed boundary method, allows to efficiently evaluate the influence of the underlying microstructure on the variability of the mechanical behavior of AM products. Numerical analysis of two lattices manufactured at different scales shows an excellent agreement with experimental data. Furthermore, it provides a unique insight into the effects of the process on the occurring geometrical variations and final mechanical behavior.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
Bending behavior of additively manufactured lattice structures: numerical characterization and experimental validation
Authors:
Nina Korshunova,
Gianluca Alaimo,
Seyyed Bahram Hosseini,
Massimo Carraturo,
Alessandro Reali,
Jarkko Niiranen,
Ferdinando Auricchio,
Ernst Rank,
Stefan Kollmannsberger
Abstract:
Selective Laser Melting (SLM) technology has undergone significant development in the past years providing unique flexibility for the fabrication of complex metamaterials such as octet-truss lattices. However, the microstructure of the final parts can exhibit significant variations due to the high complexity of the manufacturing process. Consequently, the mechanical behavior of these lattices is s…
▽ More
Selective Laser Melting (SLM) technology has undergone significant development in the past years providing unique flexibility for the fabrication of complex metamaterials such as octet-truss lattices. However, the microstructure of the final parts can exhibit significant variations due to the high complexity of the manufacturing process. Consequently, the mechanical behavior of these lattices is strongly dependent on the process-induced defects, raising the importance on the incorporation of as-manufactured geometries into the computational structural analysis. This, in turn, challenges the traditional mesh-conforming methods making the computational costs prohibitively large. In the present work, an immersed image-to-analysis framework is applied to efficiently evaluate the bending behavior of AM lattices. To this end, we employ the Finite Cell Method (FCM) to perform a three-dimensional numerical analysis of the three-point bending test of a lattice structure and compare the as-designed to as-manufactured effective properties. Furthermore, we undertake a comprehensive study on the applicability of dimensionally reduced beam models to the prediction of the bending behavior of lattice beams and validate classical and strain gradient beam theories applied in combination with the FCM. The numerical findings suggest that the SLM octet-truss lattices exhibit size effects, thus, requiring a flexible framework to incorporate high-order continuum theories.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Image-based numerical characterization and experimental validation of tensile behavior of octet-truss lattice structures
Authors:
Nina Korshunova,
Gianluca Alaimo,
Seyyed Bahram Hosseini,
Massimo Carraturo,
Alessandro Reali,
Jarkko Niiranen,
Ferdinando Auricchio,
Ernst Rank,
Stefan Kollmannsberger
Abstract:
The production of lightweight metal lattice structures has received much attention due to the recent developments in additive manufacturing (AM). The design flexibility comes, however, with the complexity of the underlying physics. In fact, metal additive manufacturing introduces process-induced geometrical defects that mainly result in deviations of the effective geometry from the nominal one. Th…
▽ More
The production of lightweight metal lattice structures has received much attention due to the recent developments in additive manufacturing (AM). The design flexibility comes, however, with the complexity of the underlying physics. In fact, metal additive manufacturing introduces process-induced geometrical defects that mainly result in deviations of the effective geometry from the nominal one. This change in the final printed shape is the primary cause of the gap between the as-designed and as-manufactured mechanical behavior of AM products. Thus, the possibility to incorporate the precise manufactured geometries into the computational analysis is crucial for the quality and performance assessment of the final parts. Computed tomography (CT) is an accurate method for the acquisition of the manufactured shape. However, it is often not feasible to integrate the CT-based geometrical information into the traditional computational analysis due to the complexity of the meshing procedure for such high-resolution geometrical models and the prohibitive numerical costs. In this work, an embedded numerical framework is applied to efficiently simulate and compare the mechanical behavior of as-designed to as-manufactured octet-truss lattice structures. The parts are produced using laser powder bed fusion (LPBF). Employing an immersed boundary method, namely the Finite Cell Method (FCM), we perform direct numerical simulations (DNS) and first-order numerical homogenization analysis of a tensile test for a 3D printed octet-truss structure. Numerical results based on CT scan (as-manufactured geometry) show an excellent agreement with experimental measurements, whereas both DNS and first-order numerical homogenization performed directly on the 3D virtual model (as-designed geometry) of the structure show a significant deviation from experimental data.
△ Less
Submitted 11 March, 2021; v1 submitted 14 December, 2020;
originally announced December 2020.
-
Finite Cell Method for functionally graded materials based on V-models and homogenized microstructures
Authors:
Benjamin Wassermann,
Nina Korshunova,
Stefan Kollmannsberger,
Ernst Rank,
Gershon Elber
Abstract:
This paper proposes an extension of the finite cell method (FCM) to V-rep models, a novel geometric framework for volumetric representations. This combination of an embedded domain approach (FCM) and a new modeling framework (V-rep) forms the basis for an efficient and accurate simulation of mechanical artifacts, which are not only characterized by complex shapes but also by their non-standard int…
▽ More
This paper proposes an extension of the finite cell method (FCM) to V-rep models, a novel geometric framework for volumetric representations. This combination of an embedded domain approach (FCM) and a new modeling framework (V-rep) forms the basis for an efficient and accurate simulation of mechanical artifacts, which are not only characterized by complex shapes but also by their non-standard interior structure. These objects gain more and more interest in the context of the new design opportunities opened by additive manufacturing, mainly when graded or micro-structured material is applied. Two different types of functionally graded materials (FGM) are considered: The first one, multi-material FGM, is described using the V-rep models' inherent property to assign different properties throughout the interior of a domain. The second, single-material FGM -- which is heterogeneously micro-structured -- characterizes the effective material behavior of representative volume elements by homogenization and performs large-scale simulations using the embedded domain approach.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Image-based material characterization of complex microarchitectured additively manufactured structures
Authors:
N. Korshunova,
J. Jomo,
G. Lékó,
D. Reznik,
P. Balázs,
S. Kollmannsberger
Abstract:
Significant developments in the field of additive manufacturing (AM) allowed the fabrication of complex microarchitectured components with varying porosity across different scales. However, due to the high complexity of this process, the final parts can exhibit significant variations in the nominal geometry. Computer tomographic images of 3D printed components provide extensive information about t…
▽ More
Significant developments in the field of additive manufacturing (AM) allowed the fabrication of complex microarchitectured components with varying porosity across different scales. However, due to the high complexity of this process, the final parts can exhibit significant variations in the nominal geometry. Computer tomographic images of 3D printed components provide extensive information about these microstructural variations, such as process-induced porosity, surface roughness, and other undesired morphological discrepancies. Yet, techniques to incorporate these imperfect AM geometries into the numerical material characterization analysis are computationally demanding. In this contribution, an efficient image-to-material-characterization framework using the high-order parallel Finite Cell Method is proposed. In this way, a flexible non-geometry-conforming discretization facilitates mesh generation for very complex microstructures at hand and allows a direct analysis of the images stemming from CT-scans. Numerical examples including a comparison to the experiments illustrate the potential of the proposed framework in the field of additive manufacturing product simulation.
△ Less
Submitted 22 July, 2020; v1 submitted 16 December, 2019;
originally announced December 2019.
-
A 3D benchmark problem for crack propagation in brittle fracture
Authors:
Lisa Hug,
Stefan Kollmannsberger,
Zohar Yosibash,
Ernst Rank
Abstract:
We propose a full 3D benchmark problem for brittle fracture based on experiments as well as a validation in the context of phase-field models. The example consists of a series of four-point bending tests on graphite specimens with sharp V-notches at different inclination angles. This simple setup leads to a mixed mode (I + II + III) loading which results in complex yet stably reproducible crack su…
▽ More
We propose a full 3D benchmark problem for brittle fracture based on experiments as well as a validation in the context of phase-field models. The example consists of a series of four-point bending tests on graphite specimens with sharp V-notches at different inclination angles. This simple setup leads to a mixed mode (I + II + III) loading which results in complex yet stably reproducible crack surfaces. The proposed problem is well suited for benchmarking numerical methods for brittle fracture and allows for a quantitative comparison of failure loads and propagation paths as well as initiation angles and the fracture surface. For evaluation of the crack surfaces image-based 3D models of the fractured specimen are provided along with experimental and numerical results. In addition, measured failure loads and computed load-displacement curves are given. To demonstrate the applicability of the benchmark problem, we show that for a phase-field model based on the Finite Cell Method and multi-level hp-refinement the complex crack surface as well as the failure loads can be well reproduced.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Direct structural analysis of domains defined by point clouds
Authors:
László Kudela,
Stefan Kollmannsberger,
Umut Almac,
Ernst Rank
Abstract:
This contribution presents a method that aims at the numerical analysis of solids represented by oriented point clouds. The proposed approach is based on the Finite Cell Method, a high-order immersed boundary technique that computes on a regular background grid of finite elements and requires only inside-outside information from the geometric model. It is shown that oriented point clouds provide s…
▽ More
This contribution presents a method that aims at the numerical analysis of solids represented by oriented point clouds. The proposed approach is based on the Finite Cell Method, a high-order immersed boundary technique that computes on a regular background grid of finite elements and requires only inside-outside information from the geometric model. It is shown that oriented point clouds provide sufficient information for these point-membership classifications. Further, we address a tessellation-free formulation of contour integrals that allows to apply Neumann boundary conditions on point clouds without having to recover the underlying surface. Two-dimensional linear elastic benchmark examples demonstrate that the method is able to provide the same accuracy as those computed with conventional, continuous surface descriptions, because the associated error can be controlled by the density of the cloud. Three-dimensional examples computed on point clouds of historical structures show how the method can be employed to establish seamless connections between digital shape measurement techniques and numerical analyses.
△ Less
Submitted 5 June, 2019;
originally announced June 2019.
-
Accurate prediction of melt pool shapes in laser powder bed fusion by the non-linear temperature equation including phase changes - isotropic versus anisotropic conductivity
Authors:
Stefan Kollmannsberger,
Massimo Carraturo,
Alessandro Reali,
Ferdinando Auricchio
Abstract:
In this contribution, we validate a physical model based on a transient temperature equation (including latent heat) w.r.t. the experimental set AMB2018-02 provided within the additive manufacturing benchmark series, established at the National Institute of Standards and Technology, USA. We aim at predicting the following quantities of interest: width, depth, and length of the melt pool by numeric…
▽ More
In this contribution, we validate a physical model based on a transient temperature equation (including latent heat) w.r.t. the experimental set AMB2018-02 provided within the additive manufacturing benchmark series, established at the National Institute of Standards and Technology, USA. We aim at predicting the following quantities of interest: width, depth, and length of the melt pool by numerical simulation and report also on the obtainable numerical results of the cooling rate. We first assume the laser to posses a double ellipsoidal shape and demonstrate that a well calibrated, purely thermal model based on isotropic thermal conductivity is able to predict all the quantities of interest, up to a deviation of maximum 7.3\% from the experimentally measured values.
However, it is interesting to observe that if we directly introduce, whenever available, the measured laser profile in the model (instead of the double ellipsoidal shape) the investigated model returns a deviation of 19.3\% from the experimental values. This motivates a model update by introducing anisotropic conductivity, which is intended to be a simplistic model for heat material convection inside the melt pool. Such an anisotropic model enables the prediction of all quantities of interest mentioned above with a maximum deviation from the experimental values of 6.5\%.
We note that, although more predictive, the anisotropic model induces only a marginal increase in computational complexity.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
Integrating CAD and Numerical Analysis: 'Dirty Geometry' handling using the Finite Cell Method
Authors:
Benjamin Wassermann,
Stefan Kollmannsberger,
Shuohui Yin,
László Kudela,
Ernst Rank
Abstract:
This paper proposes a computational methodology for the integration of Computer Aided Design (CAD) and the Finite Cell Method (FCM) for models with "dirty geometries". FCM, being a fictitious domain approach based on higher order finite elements, embeds the physical model into a fictitious domain, which can be discretized without having to take into account the boundary of the physical domain. The…
▽ More
This paper proposes a computational methodology for the integration of Computer Aided Design (CAD) and the Finite Cell Method (FCM) for models with "dirty geometries". FCM, being a fictitious domain approach based on higher order finite elements, embeds the physical model into a fictitious domain, which can be discretized without having to take into account the boundary of the physical domain. The true geometry is captured by a precise numerical integration of elements cut by the boundary. Thus, an effective Point Membership Classification algorithm that determines the inside-outside state of an integration point with respect to the physical domain is a core operation in FCM. To treat also "dirty geometries", i.e. imprecise or flawed geometric models, a combination of a segment-triangle intersection algorithm and a flood fill algorithm being insensitive to most CAD model flaws is proposed to identify the affiliation of the integration points. The present method thus allows direct computations on geometrically and topologically flawed models. The potential and merit for practical applications of the proposed method is demonstrated by several numerical examples.
△ Less
Submitted 30 April, 2019; v1 submitted 5 October, 2018;
originally announced October 2018.
-
From geometric design to numerical analysis: A direct approach using the Finite Cell Method on Constructive Solid Geometry
Authors:
Benjamin Wassermann,
Stefan Kollmannsberger,
Tino Bog,
Ernst Rank
Abstract:
During the last ten years, increasing efforts were made to improve and simplify the process from Computer Aided Design (CAD) modeling to a numerical simulation. It has been shown that the transition from one model to another, i.e. the meshing, is a bottle-neck. Several approaches have been developed to overcome this time-consuming step, e.g. Isogeometric Analysis (IGA), which applies the shape fun…
▽ More
During the last ten years, increasing efforts were made to improve and simplify the process from Computer Aided Design (CAD) modeling to a numerical simulation. It has been shown that the transition from one model to another, i.e. the meshing, is a bottle-neck. Several approaches have been developed to overcome this time-consuming step, e.g. Isogeometric Analysis (IGA), which applies the shape functions used for the geometry description (typically B-Splines and NURBS) directly to the numerical analysis. In contrast to IGA, which deals with boundary represented models (B-Rep), our approach focuses on parametric volumetric models such as Constructive Solid Geometries (CSG). These models have several advantages, as their geometry description is inherently watertight and they provide a description of the model's interior. To be able to use the explicit mathematical description of these models, we employ the Finite Cell Method (FCM). Herein, the only necessary input is a reliable statement whether an (integration-) point lies inside or outside of the geometric model. This paper mainly discusses such point-in-membership tests on various geometric objects like sweeps and lofts, as well as several geometric operations such as filleting or chamfering. We demonstrate that, based on the information of the construction method of these objects, the point-in-membership-test can be carried out efficiently and robustly
△ Less
Submitted 28 September, 2018;
originally announced September 2018.
-
A design-through-analysis approach using the Finite Cell Method (ECCOMAS Congress 2016)
Authors:
Benjamin Wassermann,
Tino Bog,
Stefan Kollmannsberger,
Ernst Rank
Abstract:
Modern 3D Computer-Aided-Design (CAD) systems use mainly two types of geometric models. Classically, objects are defined by a Boundary Representation (B-Rep), where only the objects' surfaces with their corresponding edges and nodes are stored. One disadvantage concerning a numerical simulation is that B-Rep models are not necessarily watertight. These 'dirty geometries' cause major difficulties i…
▽ More
Modern 3D Computer-Aided-Design (CAD) systems use mainly two types of geometric models. Classically, objects are defined by a Boundary Representation (B-Rep), where only the objects' surfaces with their corresponding edges and nodes are stored. One disadvantage concerning a numerical simulation is that B-Rep models are not necessarily watertight. These 'dirty geometries' cause major difficulties in computational analysis because even basic geometric operations such as point-in-membership tests fail, not to mention meshing as required by classical boundary conforming finite element methods. Alternatively, objects may be represented by Constructive Solid Geometry (CSG), which is strongly related to Procedural Modeling (PM). In this context, the model is created using Boolean operations on primitives. The modeling process is then either stored as a sequence (PM), or as a construction tree (CSG). In contrast to B-Rep models, CSG models are intrinsically water-tight. To run a finite element simulation on a water-tight CSG model, two alternatives are possible: (i) it can either be converted to a B-Rep-model to obtain a finite element mesh or (ii) its implicit description can be used directly by applying an embedded domain approach, like the Finite Cell Method (FCM). In this contribution, we present a design-through analysis methodology using CSG and FCM. A crucial point in FCM is a fast and reliable point-in-membership test which can be directly derived from the CSG model. We present the outline of the modeling approach, the realization of the point-in-membership test as a sequence of CSG-operations, and discuss advantages and limitations on complex models of relevance in mechanical engineering.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
Residual stresses in metal deposition modeling: discretizations of higher order
Authors:
Ali Özcan,
Stefan Kollmannsberger,
John N. Jomo,
Ernst Rank
Abstract:
This article addresses the research question if and how the finite cell method, an embedded domain finite element method of high order, may be used in the simulation of metal deposition to harvest its computational efficiency. This application demands for the solution of a coupled thermo-elasto-plastic problem on transient meshes within which history variables need to be managed dynamically on non…
▽ More
This article addresses the research question if and how the finite cell method, an embedded domain finite element method of high order, may be used in the simulation of metal deposition to harvest its computational efficiency. This application demands for the solution of a coupled thermo-elasto-plastic problem on transient meshes within which history variables need to be managed dynamically on non-boundary conforming discretizations. To this end, we propose to combine the multi-level hp-method and the finite cell method. The former was specifically designed to treat high-order finite element discretizations on transient meshes, while the latter offers a remedy to retain high-order convergence rates also in cases where the physical boundary does not coincide with the boundary of the discretization. We investigate the performance of the method at two analytical and one experimental benchmark.
△ Less
Submitted 25 September, 2018; v1 submitted 20 September, 2018;
originally announced September 2018.
-
Robust and parallel scalable iterative solutions for large-scale finite cell analyses
Authors:
John N. Jomo,
Frits de Prenter,
Mohamed Elhaddad,
Davide D'Angella,
Clemens V. Verhoosel,
Stefan Kollmannsberger,
Jan S. Kirschke,
Vera Nübel,
Harald van Brummelen,
Ernst Rank
Abstract:
The finite cell method is a highly flexible discretization technique for numerical analysis on domains with complex geometries. By using a non-boundary conforming computational domain that can be easily meshed, automatized computations on a wide range of geometrical models can be performed. Application of the finite cell method, and other immersed methods, to large real-life and industrial problem…
▽ More
The finite cell method is a highly flexible discretization technique for numerical analysis on domains with complex geometries. By using a non-boundary conforming computational domain that can be easily meshed, automatized computations on a wide range of geometrical models can be performed. Application of the finite cell method, and other immersed methods, to large real-life and industrial problems is often limited due to the conditioning problems associated with these methods. These conditioning problems have caused researchers to resort to direct solution methods, which signifi- cantly limit the maximum size of solvable systems. Iterative solvers are better suited for large-scale computations than their direct counterparts due to their lower memory requirements and suitability for parallel computing. These benefits can, however, only be exploited when systems are properly conditioned. In this contribution we present an Additive-Schwarz type preconditioner that enables efficient and parallel scalable iterative solutions of large-scale multi-level hp-refined finite cell analyses.
△ Less
Submitted 5 September, 2018; v1 submitted 4 September, 2018;
originally announced September 2018.
-
Parallelization of the multi-level hp-adaptive finite cell method
Authors:
John N. Jomo,
Nils Zander,
Mohamed Elhaddad,
Ali Özcan,
Stefan Kollmannsberger,
Ralf-Peter Mundani,
Ernst Rank
Abstract:
The multi-level hp-refinement scheme is a powerful extension of the finite element method that allows local mesh adaptation without the trouble of constraining hanging nodes. This is achieved through hierarchical high-order overlay meshes, a hp-scheme based on spatial refinement by superposition. An efficient parallelization of this method using standard domain decomposition approaches in combinat…
▽ More
The multi-level hp-refinement scheme is a powerful extension of the finite element method that allows local mesh adaptation without the trouble of constraining hanging nodes. This is achieved through hierarchical high-order overlay meshes, a hp-scheme based on spatial refinement by superposition. An efficient parallelization of this method using standard domain decomposition approaches in combination with ghost elements faces the challenge of a large basis function support resulting from the overlay structure and is in many cases not feasible. In this contribution, a parallelization strategy for the multi-level hp-scheme is presented that is adapted to the scheme's simple hierarchical structure. By distributing the computational domain among processes on the granularity of the active leaf elements and utilizing shared mesh data structures, good parallel performance is achieved, as redundant computations on ghost elements are avoided. We show the scheme's parallel scalability for problems with a few hundred elements per process. Furthermore, the scheme is used in conjunction with the finite cell method to perform numerical simulations on domains of complex shape.
△ Less
Submitted 3 July, 2018;
originally announced July 2018.
-
Phase-field modeling of brittle fracture with multi-level hp-FEM and the finite cell method
Authors:
Sindhu Nagaraja,
Mohamed Elhaddad,
Marreddy Ambati,
Stefan Kollmannsberger,
Laura De Lorenzis,
Ernst Rank
Abstract:
The difficulties in dealing with discontinuities related to a sharp crack are overcome in the phase-field approach for fracture by modeling the crack as a diffusive object being described by a continuous field having high gradients. The discrete crack limit case is approached for a small length-scale parameter that controls the width of the transition region between the fully broken and the undama…
▽ More
The difficulties in dealing with discontinuities related to a sharp crack are overcome in the phase-field approach for fracture by modeling the crack as a diffusive object being described by a continuous field having high gradients. The discrete crack limit case is approached for a small length-scale parameter that controls the width of the transition region between the fully broken and the undamaged phases. From a computational standpoint, this necessitates fine meshes, at least locally, in order to accurately resolve the phase-field profile. In the classical approach, phase-field models are computed on a fixed mesh that is a priori refined in the areas where the crack is expected to propagate. This on the other hand curbs the convenience of using phase-field models for unknown crack paths and its ability to handle complex crack propagation patterns. In this work, we overcome this issue by employing the multi-level hp-refinement technique that enables a dynamically changing mesh which in turn allows the refinement to remain local at singularities and high gradients without problems of hanging nodes. Yet, in case of complex geometries, mesh generation and in particular local refinement becomes non-trivial. We address this issue by integrating a two-dimensional phase-field framework for brittle fracture with the finite cell method (FCM). The FCM based on high-order finite elements is a non-geometry-conforming discretization technique wherein the physical domain is embedded into a larger fictitious domain of simple geometry that can be easily discretized. This facilitates mesh generation for complex geometries and supports local refinement. Numerical examples including a comparison to a validation experiment illustrate the applicability of the multi-level hp-refinement and the FCM in the context of phase-field simulations.
△ Less
Submitted 23 April, 2018;
originally announced April 2018.
