Showing 1–6 of 6 results for author: Ishida, K

Extension of Convolutional Neural Network along Temporal and Vertical Directions for Precipitation Downscaling

Authors: Takeyoshi Nagasato, Kei Ishida, Ali Ercan, Tongbi Tu, Masato Kiyama, Motoki Amagasaki, Kazuki Yokoo

Abstract: Deep learning has been utilized for the statistical downscaling of climate data. Specifically, a two-dimensional (2D) convolutional neural network (CNN) has been successfully applied to precipitation estimation. This study implements a three-dimensional (3D) CNN to estimate watershed-scale daily precipitation from 3D atmospheric data and compares the results with those for a 2D CNN. The 2D CNN is… ▽ More Deep learning has been utilized for the statistical downscaling of climate data. Specifically, a two-dimensional (2D) convolutional neural network (CNN) has been successfully applied to precipitation estimation. This study implements a three-dimensional (3D) CNN to estimate watershed-scale daily precipitation from 3D atmospheric data and compares the results with those for a 2D CNN. The 2D CNN is extended along the time direction (3D-CNN-Time) and the vertical direction (3D-CNN-Vert). The precipitation estimates of these extended CNNs are compared with those of the 2D CNN in terms of the root-mean-square error (RMSE), Nash-Sutcliffe efficiency (NSE), and 99th percentile RMSE. It is found that both 3D-CNN-Time and 3D-CNN-Vert improve the model accuracy for precipitation estimation compared to the 2D CNN. 3D-CNN-Vert provided the best estimates during the training and test periods in terms of RMSE and NSE. △ Less

Submitted 13 December, 2021; originally announced December 2021.

Use of 1D-CNN for input data size reduction of LSTM in Hourly Rainfall-Runoff modeling

Authors: Kei Ishida, Ali Ercan, Takeyoshi Nagasato, Masato Kiyama, Motoki Amagasaki

Abstract: An architecture consisting of a serial coupling of the one-dimensional convolutional neural network (1D-CNN) and the long short-term memory (LSTM) network, which is referred as CNNsLSTM, was proposed for hourly-scale rainfall-runoff modeling in this study. In CNNsLTSM, the CNN component receives the hourly meteorological time series data for a long duration, and then the LSTM component receives th… ▽ More An architecture consisting of a serial coupling of the one-dimensional convolutional neural network (1D-CNN) and the long short-term memory (LSTM) network, which is referred as CNNsLSTM, was proposed for hourly-scale rainfall-runoff modeling in this study. In CNNsLTSM, the CNN component receives the hourly meteorological time series data for a long duration, and then the LSTM component receives the extracted features from 1D-CNN and the hourly meteorological time series data for a short-duration. As a case study, CNNsLSTM was implemented for hourly rainfall-runoff modeling at the Ishikari River watershed, Japan. The meteorological dataset, consists of precipitation, air temperature, evapotranspiration, and long- and short-wave radiation, were utilized as input, and the river flow was used as the target data. To evaluate the performance of proposed CNNsLSTM, results of CNNsLSTM were compared with those of 1D-CNN, LSTM only with hourly inputs (LSTMwHour), parallel architecture of 1D-CNN and LSTM (CNNpLSTM), and the LSTM architecture which uses both daily and hourly input data (LSTMwDpH). CNNsLSTM showed clear improvements on the estimation accuracy compared to the three conventional architectures (1D-CNN, LSTMwHour, and CNNpLSTM), and recently proposed LSTMwDpH. In comparison to observed flows, the median of the NSE values for the test period are 0.455-0.469 for 1D-CNN (based on NCHF=8, 16, and 32, the numbers of the channels of the feature map of the first layer of CNN), 0.639-0.656 for CNNpLSTM (based on NCHF=8, 16, and 32), 0.745 for LSTMwHour, 0.831 for LSTMwDpH, and 0.865-0.873 for CNNsLSTM (based on NCHF=8, 16, and 32). Furthermore, the proposed CNNsLSTM reduces the median RMSE of 1D-CNN by 50.2%-51.4%, CNNpLSTM by 37.4%-40.8%, LSTMwHour by 27.3%-29.5%, and LSTMwDpH by 10.6%-13.4%. △ Less

Submitted 7 November, 2021; originally announced November 2021.

Comments: 18 pages, 9 figures

Directionally Decomposing Structured Light for Projector Calibration

Authors: Masatoki Sugimoto, Daisuke Iwai, Koki Ishida, Parinya Punpongsanon, Kosuke Sato

Abstract: Intrinsic projector calibration is essential in projection mapping (PM) applications, especially in dynamic PM. However, due to the shallow depth-of-field (DOF) of a projector, more work is needed to ensure accurate calibration. We aim to estimate the intrinsic parameters of a projector while avoiding the limitation of shallow DOF. As the core of our technique, we present a practical calibration d… ▽ More Intrinsic projector calibration is essential in projection mapping (PM) applications, especially in dynamic PM. However, due to the shallow depth-of-field (DOF) of a projector, more work is needed to ensure accurate calibration. We aim to estimate the intrinsic parameters of a projector while avoiding the limitation of shallow DOF. As the core of our technique, we present a practical calibration device that requires a minimal working volume directly in front of the projector lens regardless of the projector's focusing distance and aperture size. The device consists of a flat-bed scanner and pinhole-array masks. For calibration, a projector projects a series of structured light patterns in the device. The pinholes directionally decompose the structured light, and only the projected rays that pass through the pinholes hit the scanner plane. For each pinhole, we extract a ray passing through the optical center of the projector. Consequently, we regard the projector as a pinhole projector that projects the extracted rays only, and we calibrate the projector by applying the standard camera calibration technique, which assumes a pinhole camera model. Using a proof-of-concept prototype, we demonstrate that our technique can calibrate projectors with different focusing distances and aperture sizes at the same accuracy as a conventional method. Finally, we confirm that our technique can provide intrinsic parameters accurate enough for a dynamic PM application, even when a projector is placed too far from a projection target for a conventional method to calibrate the projector using a fiducial object of reasonable size. △ Less

Submitted 8 October, 2021; originally announced October 2021.

Capabilities of Deep Learning Models on Learning Physical Relationships: Case of Rainfall-Runoff Modeling with LSTM

Authors: Kazuki Yokoo, Kei Ishida, Ali Ercan, Tongbi Tu, Takeyoshi Nagasato, Masato Kiyama, Motoki Amagasaki

Abstract: This study investigates the relationships which deep learning methods can identify between the input and output data. As a case study, rainfall-runoff modeling in a snow-dominated watershed by means of a long- and short-term memory (LSTM) network is selected. Daily precipitation and mean air temperature were used as model input to estimate daily flow discharge. After model training and verificatio… ▽ More This study investigates the relationships which deep learning methods can identify between the input and output data. As a case study, rainfall-runoff modeling in a snow-dominated watershed by means of a long- and short-term memory (LSTM) network is selected. Daily precipitation and mean air temperature were used as model input to estimate daily flow discharge. After model training and verification, two experimental simulations were conducted with hypothetical inputs instead of observed meteorological data to clarify the response of the trained model to the inputs. The first numerical experiment showed that even without input precipitation, the trained model generated flow discharge, particularly winter low flow and high flow during the snow-melting period. The effects of warmer and colder conditions on the flow discharge were also replicated by the trained model without precipitation. Additionally, the model reflected only 17-39% of the total precipitation mass during the snow accumulation period in the total annual flow discharge, revealing a strong lack of water mass conservation. The results of this study indicated that a deep learning method may not properly learn the explicit physical relationships between input and target variables, although they are still capable of maintaining strong goodness-of-fit results. △ Less

Submitted 10 November, 2021; v1 submitted 15 June, 2021; originally announced June 2021.

Comments: 8 pages, 5 figures

Accelerating the SpMV kernel on standard CPUs by exploiting the partially diagonal structures

Authors: Takeshi Fukaya, Koki Ishida, Akie Miura, Takeshi Iwashita, Hiroshi Nakashima

Abstract: Sparse Matrix Vector multiplication (SpMV) is one of basic building blocks in scientific computing, and acceleration of SpMV has been continuously required. In this research, we aim for accelerating SpMV on recent CPUs for sparse matrices that have a specific sparsity structure, namely a diagonally structured sparsity pattern. We focus a hybrid storage format that combines the DIA and CSR formats,… ▽ More Sparse Matrix Vector multiplication (SpMV) is one of basic building blocks in scientific computing, and acceleration of SpMV has been continuously required. In this research, we aim for accelerating SpMV on recent CPUs for sparse matrices that have a specific sparsity structure, namely a diagonally structured sparsity pattern. We focus a hybrid storage format that combines the DIA and CSR formats, so-called the HDC format. First, we recall the importance of introducing cache blocking techniques into HDC-based SpMV kernels. Next, based on the observation of the cache blocked kernel, we present a modified version of the HDC formats, which we call the M-HDC format, in which partial diagonal structures are expected to be more efficiently picked up. For these SpMV kernels, we theoretically analyze the expected performance improvement based on performance models. Then, we conduct comprehensive experiments on state-of-the-art multi-core CPUs. By the experiments using typical matrices, we clarify the detailed performance characteristics of each SpMV kernel. We also evaluate the performance for matrices appearing in practical applications and demonstrate that our approach can accelerate SpMV for some of them. Through the present paper, we demonstrate the effectiveness of exploiting partial diagonal structures by the M-HDC format as a promising approach to accelerating SpMV on CPUs for a certain kind of practical sparse matrices. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Multi-Time-Scale Input Approaches for Hourly-Scale Rainfall-Runoff Modeling based on Recurrent Neural Networks

Authors: Kei Ishida, Masato Kiyama, Ali Ercan, Motoki Amagasaki, Tongbi Tu

Abstract: This study proposes two straightforward yet effective approaches to reduce the required computational time of the training process for time-series modeling through a recurrent neural network (RNN) using multi-time-scale time-series data as input. One approach provides coarse and fine temporal resolutions of the input time-series to RNN in parallel. The other concatenates the coarse and fine tempor… ▽ More This study proposes two straightforward yet effective approaches to reduce the required computational time of the training process for time-series modeling through a recurrent neural network (RNN) using multi-time-scale time-series data as input. One approach provides coarse and fine temporal resolutions of the input time-series to RNN in parallel. The other concatenates the coarse and fine temporal resolutions of the input time-series data over time before considering them as the input to RNN. In both approaches, first, finer temporal resolution data are utilized to learn the fine temporal scale behavior of the target data. Next, coarser temporal resolution data are expected to capture long-duration dependencies between the input and target variables. The proposed approaches were implemented for hourly rainfall-runoff modeling at a snow-dominated watershed by employing a long and short-term memory (LSTM) network, which is a newer type of RNN. Subsequently, the daily and hourly meteorological data were utilized as the input, and hourly flow discharge was considered as the target data. The results confirm that both of the proposed approaches can reduce the computational time for the training of RNN significantly (up to 32.4 times). Furthermore, one of the proposed approaches improves the estimation accuracy. △ Less

Submitted 10 November, 2021; v1 submitted 30 January, 2021; originally announced March 2021.

Comments: 11pages, 5 figures