-
Development of a non-wearable support robot capable of reproducing natural standing-up movements
Authors:
Atsuya Kusui,
Susumu Hirai,
Asuka Takai
Abstract:
To reproduce natural standing-up motion, recent studies have emphasized the importance of coordination between the assisting robot and the human. However, many non-wearable assistive devices have struggled to replicate natural motion trajectories. While wearable devices offer better coordination with the human body, they present challenges in completely isolating mechanical and electrical hazards.…
▽ More
To reproduce natural standing-up motion, recent studies have emphasized the importance of coordination between the assisting robot and the human. However, many non-wearable assistive devices have struggled to replicate natural motion trajectories. While wearable devices offer better coordination with the human body, they present challenges in completely isolating mechanical and electrical hazards. To address this, we developed a novel standing-assist robot that integrates features of both wearable and non-wearable systems, aiming to achieve high coordination while maintaining safety. The device employs a four-link mechanism aligned with the human joint structure, designed to reproduce the S-shaped trajectory of the hip and the arc trajectory of the knee during natural standing-up motion. Subject-specific trajectory data were obtained using a gyroscope, and the link lengths were determined to drive the seat along the optimal path. A feedforward speed control using a stepping motor was implemented, and the reproducibility of the trajectory was evaluated based on the geometric constraints of the mechanism. A load-bearing experiment with weights fixed to the seat was conducted to assess the trajectory accuracy under different conditions. Results showed that the reproduction errors for the hip and knee trajectories remained within approximately 4 percent of the seat's total displacement, demonstrating high fidelity to the target paths. In addition, durability testing, thermal safety evaluation, and risk assessment confirmed the reliability and safety of the system for indoor use. These findings suggest that the proposed design offers a promising approach for developing assistive technologies that adapt to individual physical characteristics, with potential applications in elderly care and rehabilitation.
△ Less
Submitted 18 May, 2025;
originally announced May 2025.
-
Detecting Signs of Model Change with Continuous Model Selection Based on Descriptive Dimensionality
Authors:
Kenji Yamanishi,
So Hirai
Abstract:
We address the issue of detecting changes of models that lie behind a data stream. The model refers to an integer-valued structural information such as the number of free parameters in a parametric model. Specifically we are concerned with the problem of how we can detect signs of model changes earlier than they are actualized. To this end, we employ {\em continuous model selection} on the basis o…
▽ More
We address the issue of detecting changes of models that lie behind a data stream. The model refers to an integer-valued structural information such as the number of free parameters in a parametric model. Specifically we are concerned with the problem of how we can detect signs of model changes earlier than they are actualized. To this end, we employ {\em continuous model selection} on the basis of the notion of {\em descriptive dimensionality}~(Ddim). It is a real-valued model dimensionality, which is designed for quantifying the model dimensionality in the model transition period. Continuous model selection is to determine the real-valued model dimensionality in terms of Ddim from a given data. We propose a novel methodology for detecting signs of model changes by tracking the rise-up of Ddim in a data stream. We apply this methodology to detecting signs of changes of the number of clusters in a Gaussian mixture model and those of the order in an auto regression model. With synthetic and real data sets, we empirically demonstrate its effectiveness by showing that it is able to visualize well how rapidly model dimensionality moves in the transition period and to raise early warning signals of model changes earlier than they are detected with existing methods.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Spectral Pruning: Compressing Deep Neural Networks via Spectral Analysis and its Generalization Error
Authors:
Taiji Suzuki,
Hiroshi Abe,
Tomoya Murata,
Shingo Horiuchi,
Kotaro Ito,
Tokuma Wachi,
So Hirai,
Masatoshi Yukishima,
Tomoaki Nishimura
Abstract:
Compression techniques for deep neural network models are becoming very important for the efficient execution of high-performance deep learning systems on edge-computing devices. The concept of model compression is also important for analyzing the generalization error of deep learning, known as the compression-based error bound. However, there is still huge gap between a practically effective comp…
▽ More
Compression techniques for deep neural network models are becoming very important for the efficient execution of high-performance deep learning systems on edge-computing devices. The concept of model compression is also important for analyzing the generalization error of deep learning, known as the compression-based error bound. However, there is still huge gap between a practically effective compression method and its rigorous background of statistical learning theory. To resolve this issue, we develop a new theoretical framework for model compression and propose a new pruning method called {\it spectral pruning} based on this framework. We define the ``degrees of freedom'' to quantify the intrinsic dimensionality of a model by using the eigenvalue distribution of the covariance matrix across the internal nodes and show that the compression ability is essentially controlled by this quantity. Moreover, we present a sharp generalization error bound of the compressed model and characterize the bias--variance tradeoff induced by the compression procedure. We apply our method to several datasets to justify our theoretical analyses and show the superiority of the the proposed method.
△ Less
Submitted 13 July, 2020; v1 submitted 26 August, 2018;
originally announced August 2018.
-
Upper Bound on Normalized Maximum Likelihood Codes for Gaussian Mixture Models
Authors:
So Hirai,
Kenji Yamanishi
Abstract:
This paper shows that the normalized maximum likelihood~(NML) code-length calculated in [1] is an upper bound on the NML code-length strictly calculated for the Gaussian Mixture Model. When we use this upper bound on the NML code-length, we must change the scale of the data sequence to satisfy the restricted domain. However, we also show that the algorithm for model selection is essentially univer…
▽ More
This paper shows that the normalized maximum likelihood~(NML) code-length calculated in [1] is an upper bound on the NML code-length strictly calculated for the Gaussian Mixture Model. When we use this upper bound on the NML code-length, we must change the scale of the data sequence to satisfy the restricted domain. However, we also show that the algorithm for model selection is essentially universal, regardless of the scale conversion of the data in Gaussian Mixture Models, and that, consequently, the experimental results in [1] can be used as they are. In addition to this, we correct the NML code-length in [1] for generalized logistic distributions.
△ Less
Submitted 18 November, 2018; v1 submitted 4 September, 2017;
originally announced September 2017.
-
Normalized Maximum Likelihood Coding for Exponential Family with Its Applications to Optimal Clustering
Authors:
So Hirai,
Kenji Yamanishi
Abstract:
We are concerned with the issue of how to calculate the normalized maximum likelihood (NML) code-length. There is a problem that the normalization term of the NML code-length may diverge when it is continuous and unbounded and a straightforward computation of it is highly expensive when the data domain is finite . In previous works it has been investigated how to calculate the NML code-length for…
▽ More
We are concerned with the issue of how to calculate the normalized maximum likelihood (NML) code-length. There is a problem that the normalization term of the NML code-length may diverge when it is continuous and unbounded and a straightforward computation of it is highly expensive when the data domain is finite . In previous works it has been investigated how to calculate the NML code-length for specific types of distributions. We first propose a general method for computing the NML code-length for the exponential family. Then we specifically focus on Gaussian mixture model (GMM), and propose a new efficient method for computing the NML to them. We develop it by generalizing Rissanen's re-normalizing technique. Then we apply this method to the clustering issue, in which a clustering structure is modeled using a GMM, and the main task is to estimate the optimal number of clusters on the basis of the NML code-length. We demonstrate using artificial data sets the superiority of the NML-based clustering over other criteria such as AIC, BIC in terms of the data size required for high accuracy rate to be achieved.
△ Less
Submitted 16 May, 2012; v1 submitted 15 May, 2012;
originally announced May 2012.
