Showing 1–17 of 17 results for author: Hawkes, E

DisCo: Distributed Contact-Rich Trajectory Optimization for Forceful Multi-Robot Collaboration

Authors: Ola Shorinwa, Matthew Devlin, Elliot W. Hawkes, Mac Schwager

Abstract: We present DisCo, a distributed algorithm for contact-rich, multi-robot tasks. DisCo is a distributed contact-implicit trajectory optimization algorithm, which allows a group of robots to optimize a time sequence of forces to objects and to their environment to accomplish tasks such as collaborative manipulation, robot team sports, and modular robot locomotion. We build our algorithm on a variant… ▽ More We present DisCo, a distributed algorithm for contact-rich, multi-robot tasks. DisCo is a distributed contact-implicit trajectory optimization algorithm, which allows a group of robots to optimize a time sequence of forces to objects and to their environment to accomplish tasks such as collaborative manipulation, robot team sports, and modular robot locomotion. We build our algorithm on a variant of the Alternating Direction Method of Multipliers (ADMM), where each robot computes its own contact forces and contact-switching events from a smaller single-robot, contact-implicit trajectory optimization problem, while cooperating with other robots through dual variables, enforcing constraints between robots. Each robot iterates between solving its local problem, and communicating over a wireless mesh network to enforce these consistency constraints with its neighbors, ultimately converging to a coordinated plan for the group. The local problems solved by each robot are significantly less challenging than a centralized problem with all robots' contact forces and switching events, improving the computational efficiency, while also preserving the privacy of some aspects of each robot's operation. We demonstrate the effectiveness of our algorithm in simulations of collaborative manipulation, multi-robot team sports scenarios, and in modular robot locomotion, where DisCo achieves $3$x higher success rates with a 2.5x to 5x faster computation time. Further, we provide results of hardware experiments on a modular truss robot, with three collaborating truss nodes planning individually while working together to produce a punctuated rolling-gate motion of the composite structure. Videos are available on the project page: https://disco-opt.github.io. △ Less

Submitted 30 October, 2024; originally announced October 2024.

Tactile Displays Driven by Projected Light

Authors: Max Linnander, Dustin Goetz, Gregory Reardon, Vijay Kumar, Elliot Hawkes, Yon Visell

Abstract: Tactile displays that lend tangible form to digital content could transform computing interactions. However, achieving the resolution, speed, and dynamic range needed for perceptual fidelity remains challenging. We present a tactile display that directly converts projected light into visible tactile patterns via a photomechanical surface populated with millimeter-scale optotactile pixels. The pixe… ▽ More Tactile displays that lend tangible form to digital content could transform computing interactions. However, achieving the resolution, speed, and dynamic range needed for perceptual fidelity remains challenging. We present a tactile display that directly converts projected light into visible tactile patterns via a photomechanical surface populated with millimeter-scale optotactile pixels. The pixels transduce incident light into mechanical displacements through photostimulated thermal gas expansion, yielding millimeter scale displacements with response times of 2 to 100 milliseconds. Employing projected light for power transmission and addressing renders these displays highly scalable. We demonstrate optically driven displays with up to 1,511 addressable pixels -- several times more pixels than any prior tactile display attaining comparable performance. Perceptual studies confirm that these displays can reproduce diverse spatiotemporal tactile patterns with high fidelity. This research establishes a foundation for practical, versatile high-resolution tactile displays driven by light. △ Less

Submitted 17 January, 2025; v1 submitted 7 October, 2024; originally announced October 2024.

Development and Testing of a Vine Robot for Urban Search and Rescue in Confined Rubble Environments

Authors: Zheyu Zhou, Yaqing Wang, Elliot W. Hawkes, Chen Li

Abstract: The request for fast response and safe operation after natural and man-made disasters in urban environments has spurred the development of robotic systems designed to assist in search and rescue operations within complex rubble sites. Traditional Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs) face significant limitations in such confined and obstructed environments. This paper… ▽ More The request for fast response and safe operation after natural and man-made disasters in urban environments has spurred the development of robotic systems designed to assist in search and rescue operations within complex rubble sites. Traditional Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs) face significant limitations in such confined and obstructed environments. This paper introduces a novel vine robot designed to navigate dense rubble, drawing inspiration from natural growth mechanisms found in plants. Unlike conventional robots, vine robots are soft robots that can grow by everting their material, allowing them to navigate through narrow spaces and obstacles. The prototype presented in this study incorporates pneumatic muscles for steering and oscillation, an equation-based robot length control plus feedback pressure regulating system for extending and retracting the robot body. We conducted a series of controlled experiments in an artificial rubble testbed to assess the robot performance under varying environmental conditions and robot parameters, including volume ratio, environmental weight, oscillation, and steering. The results show that the vine robot can achieve significant penetration depths in cluttered environments with mixed obstacle sizes and weights, and can maintain repeated trajectories, demonstrating potential for mapping and navigating complex underground paths. Our findings highlight the suitability of the vine robot for urban search and rescue missions, with further research planned to enhance its robustness and deployability in real-world scenarios. △ Less

Submitted 19 September, 2024; v1 submitted 16 September, 2024; originally announced September 2024.

Comments: Upon further review, this research was conducted as part of a short-term project, and in hindsight, it does not offer the level of depth and exhaustiveness necessary for a complete study. It would be in the best interest of the academic community to withdraw the paper at this time.

High-curvature, high-force, vine robot for inspection

Authors: Mijaíl Jaén Mendoza, Nicholas D. Naclerio, Elliot W. Hawkes

Abstract: Robot performance has advanced considerably both in and out of the factory, however in tightly constrained, unknown environments such as inside a jet engine or the human heart, current robots are less adept. In such cases where a borescope or endoscope can't reach, disassembly or surgery are costly. One promising inspection device inspired by plant growth are "vine robots" that can navigate clutte… ▽ More Robot performance has advanced considerably both in and out of the factory, however in tightly constrained, unknown environments such as inside a jet engine or the human heart, current robots are less adept. In such cases where a borescope or endoscope can't reach, disassembly or surgery are costly. One promising inspection device inspired by plant growth are "vine robots" that can navigate cluttered environments by extending from their tip. Yet, these vine robots are currently limited in their ability to simultaneously steer into tight curvatures and apply substantial forces to the environment. Here, we propose a plant-inspired method of steering by asymmetrically lengthening one side of the vine robot to enable high curvature and large force application. Our key development is the introduction of an extremely anisotropic, composite, wrinkled film with elastic moduli 400x different in orthogonal directions. The film is used as the vine robot body, oriented such that it can stretch over 120% axially, but only 3% circumferentially. With the addition of controlled layer jamming, this film enables a steering method inspired by plants in which the circumference of the robot is inextensible, but the sides can stretch to allow turns. This steering method and body pressure do not work against each other, allowing the robot to exhibit higher forces and tighter curvatures than previous vine robot architectures. This work advances the abilities of vine robots--and robots more generally--to not only access tightly constrained environments, but perform useful work once accessed. △ Less

Submitted 1 October, 2023; originally announced October 2023.

Journal ref: 2024 IEEE International Conference on Robotics and Automation (ICRA)

A light- and heat-seeking vine-inspired robot with material-level responsiveness

Authors: Shivani Deglurkar, Charles Xiao, Luke F. Gockowski, Megan T. Valentine, Elliot W. Hawkes

Abstract: The fields of soft and bio-inspired robotics promise to imbue synthetic systems with capabilities found in the natural world. However, many of these biological capabilities are yet to be realized. For example, vines in nature direct growth via localized responses embedded in the cells of vine body, allowing an organism without a central brain to successfully search for resources (e.g., light). Yet… ▽ More The fields of soft and bio-inspired robotics promise to imbue synthetic systems with capabilities found in the natural world. However, many of these biological capabilities are yet to be realized. For example, vines in nature direct growth via localized responses embedded in the cells of vine body, allowing an organism without a central brain to successfully search for resources (e.g., light). Yet to date, vine-inspired robots have yet to show such localized embedded responsiveness. Here we present a vine-inspired robotic device with material-level responses embedded in its skin and capable of growing and steering toward either a light or heat stimulus. We present basic modeling of the concept, design details, and experimental results showing its behavior in response to infrared (IR) and visible light. Our simple design concept advances the capabilities of bio-inspired robots and lays the foundation for future growing robots that are capable of seeking light or heat, yet are extremely simple and low-cost. Potential applications include solar tracking, and in the future, firefighting smoldering fires. We envision using similar robots to find hot spots in hard-to-access environments, allowing us to put out potentially long-burning fires faster. △ Less

Submitted 15 September, 2023; v1 submitted 18 January, 2023; originally announced January 2023.

A peristaltic soft, wearable robot for compression and massage therapy

Authors: Mengjia Zhu, Adrian Ferstera, Stejara Dinulescu, Nikolas Kastor, Max Linnander, Elliot W. Hawkes, Yon Visell

Abstract: Soft robotics is attractive for wearable applications that require conformal interactions with the human body. Soft wearable robotic garments hold promise for supplying dynamic compression or massage therapies, such as are applied for disorders affecting lymphatic and blood circulation. In this paper, we present a wearable robot capable of supplying dynamic compression and massage therapy via peri… ▽ More Soft robotics is attractive for wearable applications that require conformal interactions with the human body. Soft wearable robotic garments hold promise for supplying dynamic compression or massage therapies, such as are applied for disorders affecting lymphatic and blood circulation. In this paper, we present a wearable robot capable of supplying dynamic compression and massage therapy via peristaltic motion of finger-sized soft, fluidic actuators. We show that this peristaltic wearable robot can supply dynamic compression pressures exceeding 22 kPa at frequencies of 14 Hz or more, meeting requirements for compression and massage therapy. A large variety of software-programmable compression wave patterns can be generated by varying frequency, amplitude, phase delay, and duration parameters. We first demonstrate the utility of this peristaltic wearable robot for compression therapy, showing fluid transport in a laboratory model of the upper limb. We theoretically and empirically identify driving regimes that optimize fluid transport. We second demonstrate the utility of this garment for dynamic massage therapy. These findings show the potential of such a wearable robot for the treatment of several health disorders associated with lymphatic and blood circulation, such as lymphedema and blood clots. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 10 pages, 10 figures

Shared-Control Teleoperation Paradigms on a Soft Growing Robot Manipulator

Authors: Fabio Stroppa, Mario Selvaggio, Nathaniel Agharese, MingLuo, Laura H. Blumenschein, Elliot W. Hawkes, Allison M. Okamura

Abstract: Semi-autonomous telerobotic systems allow both humans and robots to exploit their strengths, while enabling personalized execution of a task. However, for new soft robots with degrees of freedom dissimilar to those of human operators, it is unknown how the control of a task should be divided between the human and robot. This work presents a set of interaction paradigms between a human and a soft g… ▽ More Semi-autonomous telerobotic systems allow both humans and robots to exploit their strengths, while enabling personalized execution of a task. However, for new soft robots with degrees of freedom dissimilar to those of human operators, it is unknown how the control of a task should be divided between the human and robot. This work presents a set of interaction paradigms between a human and a soft growing robot manipulator, and demonstrates them in both real and simulated scenarios. The robot can grow and retract by eversion and inversion of its tubular body, a property we exploit to implement interaction paradigms. We implemented and tested six different paradigms of human-robot interaction, beginning with full teleoperation and gradually adding automation to various aspects of the task execution. All paradigms were demonstrated by two expert and two naive operators. Results show that humans and the soft robot manipulator can split control along degrees of freedom while acting simultaneously. In the simple pick-and-place task studied in this work, performance improves as the control is gradually given to the robot, because the robot can correct certain human errors. However, human engagement and enjoyment may be maximized when the task is at least partially shared. Finally, when the human operator is assisted by haptic feedback based on soft robot position errors, we observed that the improvement in performance is highly dependent on the expertise of the human operator. △ Less

Submitted 17 June, 2023; v1 submitted 2 August, 2021; originally announced August 2021.

Comments: 15 pages, 14 figures

Journal ref: J Intell Robot Syst 109, 30 (2023)

Thermodynamically-informed Air-based Soft Heat Engine Design

Authors: Charles Xiao, Luke F. Gockowski, Bolin Liao, Megan T. Valentine, Elliot W. Hawkes

Abstract: Soft heat engines are poised to play a vital role in future soft robots due to their easy integration into soft structures and low-voltage power requirements. Recent works have demonstrated soft heat engines relying on liquid-to-gas phase change materials. However, despite the fact that many soft robots have air as a primary component, soft air cycles are not a focus of the field. In this paper, w… ▽ More Soft heat engines are poised to play a vital role in future soft robots due to their easy integration into soft structures and low-voltage power requirements. Recent works have demonstrated soft heat engines relying on liquid-to-gas phase change materials. However, despite the fact that many soft robots have air as a primary component, soft air cycles are not a focus of the field. In this paper, we develop theory for air-based soft heat engines design and efficiency, and demonstrate experimentally that efficiency can be improved through careful cycle design. We compare a simple constant-load cycle to a designed decreasing-load cycle, inspired by the Otto cycle. While both efficiencies are relatively low, the Otto-like cycle improves efficiency by a factor of 11.3, demonstrating the promise of this approach. Our results lay the foundation for the development of air-based soft heat engines as a new option for powering soft robots. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: IROS 2021 Conference submission

Acoustic Communication and Sensing for Inflatable Modular Soft Robots

Authors: D. S. Drew, M. Devlin, E. Hawkes, S. Follmer

Abstract: Modular soft robots combine the strengths of two traditionally separate areas of robotics. As modular robots, they can show robustness to individual failure and reconfigurability; as soft robots, they can deform and undergo large shape changes in order to adapt to their environment, and have inherent human safety. However, for sensing and communication these robots also combine the challenges of b… ▽ More Modular soft robots combine the strengths of two traditionally separate areas of robotics. As modular robots, they can show robustness to individual failure and reconfigurability; as soft robots, they can deform and undergo large shape changes in order to adapt to their environment, and have inherent human safety. However, for sensing and communication these robots also combine the challenges of both: they require solutions that are scalable (low cost and complexity) and efficient (low power) to enable collectives of large numbers of robots, and these solutions must also be able to interface with the high extension ratio elastic bodies of soft robots. In this work, we seek to address these challenges using acoustic signals produced by piezoelectric surface transducers that are cheap, simple, and low power, and that not only integrate with but also leverage the elastic robot skins for signal transmission. Importantly, to further increase scalability, the transducers exhibit multi-functionality made possible by a relatively flat frequency response across the audible and ultrasonic ranges. With minimal hardware, they enable directional contact-based communication, audible-range communication at a distance, and exteroceptive sensing. We demonstrate a subset of the decentralized collective behaviors these functions make possible with multi-robot hardware implementations. The use of acoustic waves in this domain is shown to provide distinct advantages over existing solutions. △ Less

Submitted 27 January, 2021; originally announced January 2021.

Comments: 7 pages, 9 figures, conference

Modeling, Reduction, and Control of a Helically Actuated Inertial Soft Robotic Arm via the Koopman Operator

Authors: David A. Haggerty, Michael J. Banks, Patrick C. Curtis, Igor Mezić, Elliot W. Hawkes

Abstract: Soft robots promise improved safety and capability over rigid robots when deployed in complex, delicate, and dynamic environments. However, the infinite degrees of freedom and highly nonlinear dynamics of these systems severely complicate their modeling and control. As a step toward addressing this open challenge, we apply the data-driven, Hankel Dynamic Mode Decomposition (HDMD) with time delay o… ▽ More Soft robots promise improved safety and capability over rigid robots when deployed in complex, delicate, and dynamic environments. However, the infinite degrees of freedom and highly nonlinear dynamics of these systems severely complicate their modeling and control. As a step toward addressing this open challenge, we apply the data-driven, Hankel Dynamic Mode Decomposition (HDMD) with time delay observables to the model identification of a highly inertial, helical soft robotic arm with a high number of underactuated degrees of freedom. The resulting model is linear and hence amenable to control via a Linear Quadratic Regulator (LQR). Using our test bed device, a dynamic, lightweight pneumatic fabric arm with an inertial mass at the tip, we show that the combination of HDMD and LQR allows us to command our robot to achieve arbitrary poses using only open loop control. We further show that Koopman spectral analysis gives us a dimensionally reduced basis of modes which decreases computational complexity without sacrificing predictive power. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Comments: Submitted to IEEE International Conference on Robotics and Automation, 2021

Geometric Solutions for General Actuator Routing on Inflated-Beam Soft Growing Robots

Authors: Laura H Blumenschein, Margaret Koehler, Nathan S. Usevitch, Elliot W. Hawkes, D. Caleb Rucker, Allison M. Okamura

Abstract: Continuum and soft robots can leverage complex actuator shapes to take on useful shapes while actuating only a few of their many degrees of freedom. Continuum robots that also grow increase the range of potential shapes that can be actuated and enable easier access to constrained environments. Existing models for describing the complex kinematics involved in general actuation of continuum robots r… ▽ More Continuum and soft robots can leverage complex actuator shapes to take on useful shapes while actuating only a few of their many degrees of freedom. Continuum robots that also grow increase the range of potential shapes that can be actuated and enable easier access to constrained environments. Existing models for describing the complex kinematics involved in general actuation of continuum robots rely on simulation or well-behaved stress-strain relationships, but the non-linear behavior of the thin-walled inflated-beams used in growing robots makes these techniques difficult to apply. Here we derive kinematic models of single, generally routed tendon paths on a soft pneumatic backbone of inextensible but flexible material from geometric relationships alone. This allows for forward modeling of the resulting shapes with only knowledge of the geometry of the system. We show that this model can accurately predict the shape of the whole robot body and how the model changes with actuation type. We also demonstrate the use of this kinematic model for inverse design, where actuator designs are found based on desired final robot shapes. We deploy these designed actuators on soft pneumatic growing robots to show the benefits of simultaneous growth and shape change. △ Less

Submitted 26 October, 2021; v1 submitted 10 June, 2020; originally announced June 2020.

Comments: 21 pages, 18 figures

A Dexterous Tip-extending Robot with Variable-length Shape-locking

Authors: Sicheng Wang, Ruotong Zhang, David A. Haggerty, Nicholas D. Naclerio, Elliot W. Hawkes

Abstract: Soft, tip-extending "vine" robots offer a unique mode of inspection and manipulation in highly constrained environments. For practicality, it is desirable that the distal end of the robot can be manipulated freely, while the body remains stationary. However, in previous vine robots, either the shape of the body was fixed after growth with no ability to manipulate the distal end, or the whole body… ▽ More Soft, tip-extending "vine" robots offer a unique mode of inspection and manipulation in highly constrained environments. For practicality, it is desirable that the distal end of the robot can be manipulated freely, while the body remains stationary. However, in previous vine robots, either the shape of the body was fixed after growth with no ability to manipulate the distal end, or the whole body moved together with the tip. Here, we present a concept for shape-locking that enables a vine robot to move only its distal tip, while the body is locked in place. This is achieved using two inextensible, pressurized, tip-extending, chambers that "grow" along the sides of the robot body, preserving curvature in the section where they have been deployed. The length of the locked and free sections can be varied by controlling the extension and retraction of these chambers. We present models describing this shape-locking mechanism and workspace of the robot in both free and constrained environments. We experimentally validate these models, showing an increased dexterous workspace compared to previous vine robots. Our shape-locking concept allows improved performance for vine robots, advancing the field of soft robotics for inspection and manipulation in highly constrained environments. △ Less

Submitted 20 March, 2020; originally announced March 2020.

Comments: 7 pages,10 figures. Accepted to IEEE International Conference on Rootics and Automation (ICRA) 2020

A Multimodal, Enveloping Soft Gripper: Shape Conformation, Bioinspired Adhesion, and Expansion-Driven Suction

Authors: Yufei Hao, Shantonu Biswas, Elliot Hawkes, Tianmiao Wang, Mengjia Zhu, Li Wen, Yon Visell

Abstract: A key challenge in robotics is to create efficient methods for grasping objects with diverse shapes, sizes, poses, and properties. Grasping with hand-like end effectors often requires careful selection of hand orientation and finger placement. Here, we present a soft, fingerless gripper capable of efficiently generating multiple grasping modes. It is based on a soft, cylindrical accordion structur… ▽ More A key challenge in robotics is to create efficient methods for grasping objects with diverse shapes, sizes, poses, and properties. Grasping with hand-like end effectors often requires careful selection of hand orientation and finger placement. Here, we present a soft, fingerless gripper capable of efficiently generating multiple grasping modes. It is based on a soft, cylindrical accordion structure containing coupled, parallel fluidic channels. It is controlled via pressure supplied from a single fluidic port. Inflation opens the gripper orifice for enveloping an object, while deflation allows it to produce grasping forces. The interior is patterned with a gecko-like skin that increases friction, enabling the gripper to lift objects weighing up to 20 N. Our design ensures that fragile objects, such as eggs, can be safely handled, by virtue of a wall buckling mechanism. The gripper can integrate a lip that enables it to form a seal and, upon inflating, to generate suction for lifting objects with flat surfaces. The gripper may also be inflated to expand into an opening or orifice for grasping objects with handles or openings. We describe the design and fabrication of this device and present an analytical model of its behavior when operated from a single fluidic port. In experiments, we demonstrate its ability to grasp diverse objects, and show that its performance is well described by our model. Our findings show how a fingerless soft gripper can efficiently perform a variety of grasping operations. Such devices could improve the ability of robotic systems to meet applications in areas of great economic and societal importance. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Comments: 11 pages, 8 figures

Retraction of Soft Growing Robots without Buckling

Authors: Margaret M. Coad, Rachel P. Thomasson, Laura H. Blumenschein, Nathan S. Usevitch, Elliot W. Hawkes, Allison M. Okamura

Abstract: Tip-extending soft robots that "grow" via pneumatic eversion of their body material have demonstrated applications in exploration of cluttered environments. During growth, the motion and force of the robot tip can be controlled in three degrees of freedom using actuators that direct the tip in combination with extension. However, when reversal of the growth process is attempted by retracting the i… ▽ More Tip-extending soft robots that "grow" via pneumatic eversion of their body material have demonstrated applications in exploration of cluttered environments. During growth, the motion and force of the robot tip can be controlled in three degrees of freedom using actuators that direct the tip in combination with extension. However, when reversal of the growth process is attempted by retracting the internal body material from the base, the robot body often responds by buckling rather than inverting the body material, making control of tip motion and force impossible. We present and validate a model to predict when buckling occurs instead of inversion, and we present an electromechanical device that can be added to a tip-extending soft robot to prevent buckling during retraction, restoring the ability of steering actuators to control the robot's motion and force during inversion. Using our retraction device, we demonstrate three previously impossible tasks: exploring different branches of a forking path, reversing growth while applying minimal force on the environment, and bringing back environment samples to the base. △ Less

Submitted 18 December, 2019; v1 submitted 25 October, 2019; originally announced October 2019.

Comments: Under review for the IEEE Robotics and Automation Letters. Video available at https://www.youtube.com/watch?v=Vw8cArH0vxk

Robust Navigation of a Soft Growing Robot by Exploiting Contact with the Environment

Authors: Joseph D. Greer, Laura H. Blumenschein, Ron Alterovitz, Elliot W. Hawkes, Allison M. Okamura

Abstract: Navigation and motion control of a robot to a destination are tasks that have historically been performed with the assumption that contact with the environment is harmful. This makes sense for rigid-bodied robots where obstacle collisions are fundamentally dangerous. However, because many soft robots have bodies that are low-inertia and compliant, obstacle contact is inherently safe. As a result,… ▽ More Navigation and motion control of a robot to a destination are tasks that have historically been performed with the assumption that contact with the environment is harmful. This makes sense for rigid-bodied robots where obstacle collisions are fundamentally dangerous. However, because many soft robots have bodies that are low-inertia and compliant, obstacle contact is inherently safe. As a result, constraining paths of the robot to not interact with the environment is not necessary and may be limiting. In this paper, we mathematically formalize interactions of a soft growing robot with a planar environment in an empirical kinematic model. Using this interaction model, we develop a method to plan paths for the robot to a destination. Rather than avoiding contact with the environment, the planner exploits obstacle contact when beneficial for navigation. We find that a planner that takes into account and capitalizes on environmental contact produces paths that are more robust to uncertainty than a planner that avoids all obstacle contact. △ Less

Submitted 9 February, 2021; v1 submitted 22 August, 2019; originally announced August 2019.

Comments: 15 pages, 18 figures, supplementary video included and higher resolution available at https://youtu.be/XdTdFLz2TWU

Journal ref: The International Journal of Robotics Research. 2020;39(14):1724-1738

Fluidic Fabric Muscle Sheets for Wearable and Soft Robotics

Authors: Mengjia Zhu, Thanh Nho Do, Elliot Hawkes, Yon Visell

Abstract: Conformable robotic systems are attractive for applications in which they can be used to actuate structures with large surface areas, to provide forces through wearable garments, or to realize autonomous robotic systems. We present a new family of soft actuators that we refer to as Fluidic Fabric Muscle Sheets (FFMS). They are composite fabric structures that integrate fluidic transmissions based… ▽ More Conformable robotic systems are attractive for applications in which they can be used to actuate structures with large surface areas, to provide forces through wearable garments, or to realize autonomous robotic systems. We present a new family of soft actuators that we refer to as Fluidic Fabric Muscle Sheets (FFMS). They are composite fabric structures that integrate fluidic transmissions based on arrays of elastic tubes. These sheet-like actuators can strain, squeeze, bend, and conform to hard or soft objects of arbitrary shapes or sizes, including the human body. We show how to design and fabricate FFMS actuators via facile apparel engineering methods, including computerized sewing techniques. Together, these determine the distributions of stresses and strains that can be generated by the FFMS. We present a simple mathematical model that proves effective for predicting their performance. FFMS can operate at frequencies of 5 Hertz or more, achieve engineering strains exceeding 100%, and exert forces greater than 115 times their own weight. They can be safely used in intimate contact with the human body even when delivering stresses exceeding 10$^\text{6}$ Pascals. We demonstrate their versatility for actuating a variety of bodies or structures, and in configurations that perform multi-axis actuation, including bending and shape change. As we also show, FFMS can be used to exert forces on body tissues for wearable and biomedical applications. We demonstrate several potential use cases, including a miniature steerable robot, a glove for grasp assistance, garments for applying compression to the extremities, and devices for actuating small body regions or tissues via localized skin stretch. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Comments: 32 pages, 10 figures

Vine Robots: Design, Teleoperation, and Deployment for Navigation and Exploration

Authors: Margaret M. Coad, Laura H. Blumenschein, Sadie Cutler, Javier A. Reyna Zepeda, Nicholas D. Naclerio, Haitham El-Hussieny, Usman Mehmood, Jee-Hwan Ryu, Elliot W. Hawkes, Allison M. Okamura

Abstract: A new class of continuum robots has recently been explored, characterized by tip extension, significant length change, and directional control. Here, we call this class of robots "vine robots," due to their similar behavior to plants with the growth habit of trailing. Due to their growth-based movement, vine robots are well suited for navigation and exploration in cluttered environments, but until… ▽ More A new class of continuum robots has recently been explored, characterized by tip extension, significant length change, and directional control. Here, we call this class of robots "vine robots," due to their similar behavior to plants with the growth habit of trailing. Due to their growth-based movement, vine robots are well suited for navigation and exploration in cluttered environments, but until now, they have not been deployed outside the lab. Portability of these robots and steerability at length scales relevant for navigation are key to field applications. In addition, intuitive human-in-the-loop teleoperation enables movement in unknown and dynamic environments. We present a vine robot system that is teleoperated using a custom designed flexible joystick and camera system, long enough for use in navigation tasks, and portable for use in the field. We report on deployment of this system in two scenarios: a soft robot navigation competition and exploration of an archaeological site. The competition course required movement over uneven terrain, past unstable obstacles, and through a small aperture. The archaeological site required movement over rocks and through horizontal and vertical turns. The robot tip successfully moved past the obstacles and through the tunnels, demonstrating the capability of vine robots to achieve navigation and exploration tasks in the field. △ Less

Submitted 6 January, 2020; v1 submitted 28 February, 2019; originally announced March 2019.

Comments: IEEE Robotics and Automation Magazine, 2019. Video available at https://youtu.be/9NtXUL69g_k