-
Energy Conservation in Optical Fibers with Distributed Brick-Walls Filters
Authors:
Javier Garcia,
Hassan Ghozlan,
Gerhard Kramer
Abstract:
A band-pass filtering scheme is proposed to mitigate spectral broadening and channel coupling in the Nonlinear Schrödinger (NLS) fiber optic channel. The scheme is modeled by modifying the NLS Equation to include an attenuation profile with multiple brick-wall filters centered at different frequencies. It is shown that this brick-walls profile conserves the total in-band energy of the launch signa…
▽ More
A band-pass filtering scheme is proposed to mitigate spectral broadening and channel coupling in the Nonlinear Schrödinger (NLS) fiber optic channel. The scheme is modeled by modifying the NLS Equation to include an attenuation profile with multiple brick-wall filters centered at different frequencies. It is shown that this brick-walls profile conserves the total in-band energy of the launch signal. Furthermore, energy fluctuations between the filtered channels are characterized, and conditions on the channel spacings are derived that ensure energy conservation in each channel. The maximum spectral efficiency of such a system is derived, and a constructive rule for achieving it using Sidon sequences is provided.
△ Less
Submitted 29 December, 2017; v1 submitted 17 July, 2017;
originally announced July 2017.
-
Models and Information Rates for Wiener Phase Noise Channels
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
A waveform channel is considered where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise. A discrete-time channel model that takes into account the effect of filtering on the phase noise is developed. The model is based on a multi-sample receiver, i.e., an integrate-and-dump filter whose output is sampled at a rate higher than the signaling rate. It is sho…
▽ More
A waveform channel is considered where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise. A discrete-time channel model that takes into account the effect of filtering on the phase noise is developed. The model is based on a multi-sample receiver, i.e., an integrate-and-dump filter whose output is sampled at a rate higher than the signaling rate. It is shown that, at high Signal-to-Noise Ratio (SNR), the multi-sample receiver achieves a rate that grows logarithmically with the SNR if the number of samples per symbol (oversampling factor) grows with the cubic root of the SNR. Moreover, the pre-log factor is at least 1/2 and can be achieved by amplitude modulation. For an approximate discrete-time model of the multi-sample receiver, the capacity pre-log at high SNR is shown to be at least 3/4 if the number of samples per symbol grows with the square root of the SNR. The analysis shows that phase modulation achieves a pre-log of at least 1/4 while amplitude modulation still achieves a pre-log of 1/2. This is strictly greater than the capacity pre-log of the (approximate) discrete-time Wiener phase noise channel with only one sample per symbol, which is 1/2. Numerical simulations are used to compute lower bounds on the information rates achieved by the multi-sample receiver. The simulations show that oversampling is beneficial for both strong and weak phase noise at high SNR. In fact, the information rates are sometimes substantially larger than when using commonly-used approximate discrete-time models.
△ Less
Submitted 11 August, 2017; v1 submitted 10 March, 2015;
originally announced March 2015.
-
Models and Information Rates for Multiuser Optical Fiber Channels with Nonlinearity and Dispersion
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
Two discrete-time interference channel models are developed for information transmission over a single span of optical fiber using wavelength-division multiplexing (WDM) and lumped amplification. The models are derived from the nonlinear Schroedinger (NLS) equation by including the nonlinear phenomena of self-phase modulation (SPM) and cross-phase modulation (XPM) but ignoring four-wave mixing (FW…
▽ More
Two discrete-time interference channel models are developed for information transmission over a single span of optical fiber using wavelength-division multiplexing (WDM) and lumped amplification. The models are derived from the nonlinear Schroedinger (NLS) equation by including the nonlinear phenomena of self-phase modulation (SPM) and cross-phase modulation (XPM) but ignoring four-wave mixing (FWM), polarization effects and group velocity dispersion (GVD) within WDM bands. The first model also ignores GVD across WDM bands, referred to as group velocity mistmatch (GVM). For the case of two users, a new technique called "interference focusing" is proposed where each carrier achieves the capacity pre-log 1, thereby doubling the pre-log of 1/2 achieved by using conventional methods. For three users, interference focusing is also useful under certain conditions. The second model captures GVM and the effect of filtering at the receivers in addition to SPM and XPM. In a 3-user system, it is shown that all users can achieve the maximum pre-log factor 1 simultaneously by using interference focusing, a time-limited pulse and a bank of filters at the receivers.
△ Less
Submitted 11 August, 2017; v1 submitted 10 March, 2015;
originally announced March 2015.
-
Phase Modulation for Discrete-time Wiener Phase Noise Channels with Oversampling at High SNR
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
A discrete-time Wiener phase noise channel model is introduced in which multiple samples are available at the output for every input symbol. A lower bound on the capacity is developed. At high signal-to-noise ratio (SNR), if the number of samples per symbol grows with the square root of the SNR, the capacity pre-log is at least 3/4. This is strictly greater than the capacity pre-log of the Wiener…
▽ More
A discrete-time Wiener phase noise channel model is introduced in which multiple samples are available at the output for every input symbol. A lower bound on the capacity is developed. At high signal-to-noise ratio (SNR), if the number of samples per symbol grows with the square root of the SNR, the capacity pre-log is at least 3/4. This is strictly greater than the capacity pre-log of the Wiener phase noise channel with only one sample per symbol, which is 1/2. It is shown that amplitude modulation achieves a pre-log of 1/2 while phase modulation achieves a pre-log of at least 1/4.
△ Less
Submitted 11 May, 2014;
originally announced May 2014.
-
Multi-sample Receivers Increase Information Rates for Wiener Phase Noise Channels
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
A waveform channel is considered where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise (AWGN). A discrete-time channel model is introduced that is based on a multi-sample receiver. Tight lower bounds on the information rates achieved by the multi-sample receiver are computed by means of numerical simulations. The results show that oversampling at the rec…
▽ More
A waveform channel is considered where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise (AWGN). A discrete-time channel model is introduced that is based on a multi-sample receiver. Tight lower bounds on the information rates achieved by the multi-sample receiver are computed by means of numerical simulations. The results show that oversampling at the receiver is beneficial for both strong and weak phase noise at high signal-to-noise ratios. The results are compared with results obtained when using other discrete-time models.
△ Less
Submitted 27 March, 2013;
originally announced March 2013.
-
On Wiener Phase Noise Channels at High Signal-to-Noise Ratio
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
Consider a waveform channel where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise (AWGN). A discrete-time channel model that takes into account the effect of filtering on the phase noise is developed. The model is based on a multi-sample receiver which, at high Signal-to-Noise Ratio (SNR), achieves a rate that grows logarithmically with the SNR if the nu…
▽ More
Consider a waveform channel where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise (AWGN). A discrete-time channel model that takes into account the effect of filtering on the phase noise is developed. The model is based on a multi-sample receiver which, at high Signal-to-Noise Ratio (SNR), achieves a rate that grows logarithmically with the SNR if the number of samples per symbol grows with the square-root of the SNR. Moreover, the pre-log factor is at least 1/2 in this case.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Interference Focusing for Simplified Optical Fiber Models with Dispersion
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
A discrete-time two-user interference channel model is developed that captures non-linear phenomena that arise in optical fiber communication employing wavelength-division multiplexing (WDM). The effect of non-linearity is that an amplitude variation on one carrier induces a phase variation on the other carrier. Moreover, the model captures the effect of group velocity mismatch that introduces mem…
▽ More
A discrete-time two-user interference channel model is developed that captures non-linear phenomena that arise in optical fiber communication employing wavelength-division multiplexing (WDM). The effect of non-linearity is that an amplitude variation on one carrier induces a phase variation on the other carrier. Moreover, the model captures the effect of group velocity mismatch that introduces memory in the channel. It is shown that both users can achieve the maximum pre-log factor of 1 simultaneously by using an interference focusing technique introduced in an earlier work.
△ Less
Submitted 11 July, 2011;
originally announced July 2011.
-
Interference Focusing for Mitigating Cross-Phase Modulation in a Simplified Optical Fiber Model
Authors:
Hassan Ghozlan,
Gerhard Kramer
Abstract:
A memoryless interference network model is introduced that is based on non-linear phenomena observed when transmitting information over optical fiber using wavelength division multiplexing. The main characteristic of the model is that amplitude variations on one carrier wave are converted to phase variations on another carrier wave, i.e., the carriers interfere with each other through amplitude-to…
▽ More
A memoryless interference network model is introduced that is based on non-linear phenomena observed when transmitting information over optical fiber using wavelength division multiplexing. The main characteristic of the model is that amplitude variations on one carrier wave are converted to phase variations on another carrier wave, i.e., the carriers interfere with each other through amplitude-to-phase conversion. For the case of two carriers, a new technique called interference focusing is proposed where each carrier achieves the capacity pre-log 1, thereby doubling the pre-log of 1/2 achieved by using conventional methods. The technique requires neither channel time variations nor global channel state information. Generalizations to more than two carriers are outlined.
△ Less
Submitted 30 April, 2010; v1 submitted 10 March, 2010;
originally announced March 2010.
-
The MIMO Wireless Switch: Relaying Can Increase the Multiplexing Gain
Authors:
Hassan Ghozlan,
Yahya Mohasseb,
Hesham El Gamal,
Gerhard Kramer
Abstract:
This paper considers an interference network composed of K half-duplex single-antenna pairs of users who wish to establish bi-directional communication with the aid of a multi-input-multi-output (MIMO) half-duplex relay node. This channel is referred to as the "MIMO Wireless Switch" since, for the sake of simplicity, our model assumes no direct link between the two end nodes of each pair implyin…
▽ More
This paper considers an interference network composed of K half-duplex single-antenna pairs of users who wish to establish bi-directional communication with the aid of a multi-input-multi-output (MIMO) half-duplex relay node. This channel is referred to as the "MIMO Wireless Switch" since, for the sake of simplicity, our model assumes no direct link between the two end nodes of each pair implying that all communication must go through the relay node (i.e., the MIMO switch). Assuming a delay-limited scenario, the fundamental limits in the high signal-to-noise ratio (SNR) regime is analyzed using the diversity multiplexing tradeoff (DMT) framework. Our results sheds light on the structure of optimal transmission schemes and the gain offered by the relay node in two distinct cases, namely reciprocal and non-reciprocal channels (between the relay and end-users). In particular, the existence of a relay node, equipped with a sufficient number of antennas, is shown to increase the multiplexing gain; as compared with the traditional fully connected K-pair interference channel. To the best of our knowledge, this is the first known example where adding a relay node results in enlarging the pre-log factor of the sum rate. Moreover, for the case of reciprocal channels, it is shown that, when the relay has a number of antennas at least equal to the sum of antennas of all the users, static time allocation of decode and forward (DF) type schemes is optimal. On the other hand, in the non-reciprocal scenario, we establish the optimality of dynamic decode and forward in certain relevant scenarios.
△ Less
Submitted 16 January, 2009;
originally announced January 2009.
