-
Improving Oil Slick Trajectory Simulations with Bayesian Optimization
Authors:
Gabriele Accarino,
Marco M. De Carlo,
Igor Atake,
Donatello Elia,
Anusha L. Dissanayake,
Antonio Augusto Sepp Neves,
Juan Peña Ibañez,
Italo Epicoco,
Paola Nassisi,
Sandro Fiore,
Giovanni Coppini
Abstract:
Accurate simulations of oil spill trajectories are essential for supporting practitioners' response and mitigating environmental and socioeconomic impacts. Numerical models, such as MEDSLIK-II, simulate advection, dispersion, and transformation processes of oil particles. However, simulations heavily rely on accurate parameter tuning, still based on expert knowledge and manual calibration. To over…
▽ More
Accurate simulations of oil spill trajectories are essential for supporting practitioners' response and mitigating environmental and socioeconomic impacts. Numerical models, such as MEDSLIK-II, simulate advection, dispersion, and transformation processes of oil particles. However, simulations heavily rely on accurate parameter tuning, still based on expert knowledge and manual calibration. To overcome these limitations, we integrate the MEDSLIK-II numerical oil spill model with a Bayesian optimization framework to iteratively estimate the best physical parameter configuration that yields simulation closer to satellite observations of the slick. We focus on key parameters, such as horizontal diffusivity and drift factor, maximizing the Fraction Skill Score (FSS) as a measure of spatio-temporal overlap between simulated and observed oil distributions. We validate the framework for the Baniyas oil incident that occurred in Syria between August 23 and September 4, 2021, which released over 12,000 $m^3$ of oil. We show that, on average, the proposed approach systematically improves the FSS from 5.82% to 11.07% compared to control simulations initialized with default parameters. The optimization results in consistent improvement across multiple time steps, particularly during periods of increased drift variability, demonstrating the robustness of our method in dynamic environmental conditions.
△ Less
Submitted 4 March, 2025;
originally announced March 2025.
-
A Global Multi-Unit Calibration as a Method for Large Scale IoT Particulate Matter Monitoring Systems Deployments
Authors:
Saverio De Vito,
Gerardo D Elia,
Sergio Ferlito,
Girolamo Di Francia,
Milos Davidovic,
Duska Kleut,
Danka Stojanovic,
Milena Jovasevic Stojanovic
Abstract:
Scalable and effective calibration is a fundamental requirement for Low Cost Air Quality Monitoring Systems and will enable accurate and pervasive monitoring in cities. Suffering from environmental interferences and fabrication variance, these devices need to encompass sensors specific and complex calibration processes for reaching a sufficient accuracy to be deployed as indicative measurement dev…
▽ More
Scalable and effective calibration is a fundamental requirement for Low Cost Air Quality Monitoring Systems and will enable accurate and pervasive monitoring in cities. Suffering from environmental interferences and fabrication variance, these devices need to encompass sensors specific and complex calibration processes for reaching a sufficient accuracy to be deployed as indicative measurement devices in Air Quality (AQ) monitoring networks. Concept and sensor drift often force calibration process to be frequently repeated. These issues lead to unbearable calibration costs which denies their massive deployment when accuracy is a concern. In this work, We propose a zero transfer samples, global calibration methodology as a technological enabler for IoT AQ multisensory devices which relies on low cost Particulate Matter (PM) sensors. This methodology is based on field recorded responses from a limited number of IoT AQ multisensors units and machine learning concepts and can be universally applied to all units of the same type. A multi season test campaign shown that, when applied to different sensors, this methodology performances match those of state of the art methodology which requires to derive different calibration parameters for each different unit. If confirmed, these results show that, when properly derived, a global calibration law can be exploited for a large number of networked devices with dramatic cost reduction eventually allowing massive deployment of accurate IoT AQ monitoring devices. Furthermore, this calibration model could be easily embedded on board of the device or implemented on the edge allowing immediate access to accurate readings for personal exposure monitor applications as well as reducing long range data transfer needs.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
The Innovation-to-Occupations Ontology: Linking Business Transformation Initiatives to Occupations and Skills
Authors:
Daniela Elia,
Fang Chen,
Didar Zowghi,
Marian-Andrei Rizoiu
Abstract:
The fast adoption of new technologies forces companies to continuously adapt their operations making it harder to predict workforce requirements. Several recent studies have attempted to predict the emergence of new roles and skills in the labour market from online job ads. This paper aims to present a novel ontology linking business transformation initiatives to occupations and an approach to aut…
▽ More
The fast adoption of new technologies forces companies to continuously adapt their operations making it harder to predict workforce requirements. Several recent studies have attempted to predict the emergence of new roles and skills in the labour market from online job ads. This paper aims to present a novel ontology linking business transformation initiatives to occupations and an approach to automatically populating it by leveraging embeddings extracted from job ads and Wikipedia pages on business transformation and emerging technologies topics. To our knowledge, no previous research explicitly links business transformation initiatives, like the adoption of new technologies or the entry into new markets, to the roles needed. Our approach successfully matches occupations to transformation initiatives under ten different scenarios, five linked to technology adoption and five related to business. This framework presents an innovative approach to guide enterprises and educational institutions on the workforce requirements for specific business transformation initiatives.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
Transferring climate change physical knowledge
Authors:
Francesco Immorlano,
Veronika Eyring,
Thomas le Monnier de Gouville,
Gabriele Accarino,
Donatello Elia,
Stephan Mandt,
Giovanni Aloisio,
Pierre Gentine
Abstract:
Precise and reliable climate projections are required for climate adaptation and mitigation, but Earth system models still exhibit great uncertainties. Several approaches have been developed to reduce the spread of climate projections and feedbacks, yet those methods cannot capture the non-linear complexity inherent in the climate system. Using a Transfer Learning approach, we show that Machine Le…
▽ More
Precise and reliable climate projections are required for climate adaptation and mitigation, but Earth system models still exhibit great uncertainties. Several approaches have been developed to reduce the spread of climate projections and feedbacks, yet those methods cannot capture the non-linear complexity inherent in the climate system. Using a Transfer Learning approach, we show that Machine Learning can be used to optimally leverage and merge the knowledge gained from Earth system models simulations and historical observations to reduce the spread of global surface air temperature fields projected in the 21st century. We reach an uncertainty reduction of more than 50% with respect to state-of-the-art approaches, while giving evidence that our novel method provides improved regional temperature patterns together with narrower projections uncertainty, urgently required for climate adaptation.
△ Less
Submitted 17 December, 2024; v1 submitted 26 September, 2023;
originally announced September 2023.
-
An Ensemble Machine Learning Approach for Tropical Cyclone Detection Using ERA5 Reanalysis Data
Authors:
Gabriele Accarino,
Davide Donno,
Francesco Immorlano,
Donatello Elia,
Giovanni Aloisio
Abstract:
Tropical Cyclones (TCs) are counted among the most destructive phenomena that can be found in nature. Every year, globally an average of 90 TCs occur over tropical waters, and global warming is making them stronger, larger and more destructive. The accurate detection and tracking of such phenomena have become a relevant and interesting area of research in weather and climate science. Traditionally…
▽ More
Tropical Cyclones (TCs) are counted among the most destructive phenomena that can be found in nature. Every year, globally an average of 90 TCs occur over tropical waters, and global warming is making them stronger, larger and more destructive. The accurate detection and tracking of such phenomena have become a relevant and interesting area of research in weather and climate science. Traditionally, TCs have been identified in large climate datasets through the use of deterministic tracking schemes that rely on subjective thresholds. Machine Learning (ML) models can complement deterministic approaches due to their ability to capture the mapping between the input climatic drivers and the geographical position of the TC center from the available data. This study presents a ML ensemble approach for locating TC center coordinates, embedding both TC classification and localization in a single end-to-end learning task. The ensemble combines TC center estimates of different ML models that agree about the presence of a TC in input data. ERA5 reanalysis were used for model training and testing jointly with the International Best Track Archive for Climate Stewardship records. Results showed that the ML approach is well-suited for TC detection providing good generalization capabilities on out of sample data. In particular, it was able to accurately detect lower TC categories than those used for training the models. On top of this, the ensemble approach was able to further improve TC localization performance with respect to single model TC center estimates, demonstrating the good capabilities of the proposed approach.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Enabling Dynamic and Intelligent Workflows for HPC, Data Analytics, and AI Convergence
Authors:
Jorge Ejarque,
Rosa M. Badia,
Loïc Albertin,
Giovanni Aloisio,
Enrico Baglione,
Yolanda Becerra,
Stefan Boschert,
Julian R. Berlin,
Alessandro D'Anca,
Donatello Elia,
François Exertier,
Sandro Fiore,
José Flich,
Arnau Folch,
Steven J Gibbons,
Nikolay Koldunov,
Francesc Lordan,
Stefano Lorito,
Finn Løvholt,
Jorge Macías,
Fabrizio Marozzo,
Alberto Michelini,
Marisol Monterrubio-Velasco,
Marta Pienkowska,
Josep de la Puente
, et al. (12 additional authors not shown)
Abstract:
The evolution of High-Performance Computing (HPC) platforms enables the design and execution of progressively larger and more complex workflow applications in these systems. The complexity comes not only from the number of elements that compose the workflows but also from the type of computations they perform. While traditional HPC workflows target simulations and modelling of physical phenomena,…
▽ More
The evolution of High-Performance Computing (HPC) platforms enables the design and execution of progressively larger and more complex workflow applications in these systems. The complexity comes not only from the number of elements that compose the workflows but also from the type of computations they perform. While traditional HPC workflows target simulations and modelling of physical phenomena, current needs require in addition data analytics (DA) and artificial intelligence (AI) tasks. However, the development of these workflows is hampered by the lack of proper programming models and environments that support the integration of HPC, DA, and AI, as well as the lack of tools to easily deploy and execute the workflows in HPC systems. To progress in this direction, this paper presents use cases where complex workflows are required and investigates the main issues to be addressed for the HPC/DA/AI convergence. Based on this study, the paper identifies the challenges of a new workflow platform to manage complex workflows. Finally, it proposes a development approach for such a workflow platform addressing these challenges in two directions: first, by defining a software stack that provides the functionalities to manage these complex workflows; and second, by proposing the HPC Workflow as a Service (HPCWaaS) paradigm, which leverages the software stack to facilitate the reusability of complex workflows in federated HPC infrastructures. Proposals presented in this work are subject to study and development as part of the EuroHPC eFlows4HPC project.
△ Less
Submitted 13 May, 2022; v1 submitted 20 April, 2022;
originally announced April 2022.
-
Machine learning based data mining for Milky Way filamentary structures reconstruction
Authors:
Giuseppe Riccio,
Stefano Cavuoti,
Eugenio Schisano,
Massimo Brescia,
Amata Mercurio,
Davide Elia,
Milena Benedettini,
Stefano Pezzuto,
Sergio Molinari,
Anna Maria Di Giorgio
Abstract:
We present an innovative method called FilExSeC (Filaments Extraction, Selection and Classification), a data mining tool developed to investigate the possibility to refine and optimize the shape reconstruction of filamentary structures detected with a consolidated method based on the flux derivative analysis, through the column-density maps computed from Herschel infrared Galactic Plane Survey (Hi…
▽ More
We present an innovative method called FilExSeC (Filaments Extraction, Selection and Classification), a data mining tool developed to investigate the possibility to refine and optimize the shape reconstruction of filamentary structures detected with a consolidated method based on the flux derivative analysis, through the column-density maps computed from Herschel infrared Galactic Plane Survey (Hi-GAL) observations of the Galactic plane. The present methodology is based on a feature extraction module followed by a machine learning model (Random Forest) dedicated to select features and to classify the pixels of the input images. From tests on both simulations and real observations the method appears reliable and robust with respect to the variability of shape and distribution of filaments. In the cases of highly defined filament structures, the presented method is able to bridge the gaps among the detected fragments, thus improving their shape reconstruction. From a preliminary "a posteriori" analysis of derived filament physical parameters, the method appears potentially able to add a sufficient contribution to complete and refine the filament reconstruction.
△ Less
Submitted 11 October, 2016; v1 submitted 25 May, 2015;
originally announced May 2015.
