-
Fluoroscopic Shape and Pose Tracking of Catheters with Custom Radiopaque Markers
Authors:
Jared Lawson,
Rohan Chitale,
Nabil Simaan
Abstract:
Safe navigation of steerable and robotic catheters in the cerebral vasculature requires awareness of the catheters shape and pose. Currently, a significant perception burden is placed on interventionalists to mentally reconstruct and predict catheter motions from biplane fluoroscopy images. Efforts to track these catheters are limited to planar segmentation or bulky sensing instrumentation, which…
▽ More
Safe navigation of steerable and robotic catheters in the cerebral vasculature requires awareness of the catheters shape and pose. Currently, a significant perception burden is placed on interventionalists to mentally reconstruct and predict catheter motions from biplane fluoroscopy images. Efforts to track these catheters are limited to planar segmentation or bulky sensing instrumentation, which are incompatible with microcatheters used in neurointervention. In this work, a catheter is equipped with custom radiopaque markers arranged to enable simultaneous shape and pose estimation under biplane fluoroscopy. A design measure is proposed to guide the arrangement of these markers to minimize sensitivity to marker tracking uncertainty. This approach was deployed for microcatheters smaller than 2mm OD navigating phantom vasculature with shape tracking errors less than 1mm and catheter roll errors below 40 degrees. This work can enable steerable catheters to autonomously navigate under biplane imaging.
△ Less
Submitted 11 June, 2025;
originally announced June 2025.
-
Endovascular Detection of Catheter-Thrombus Contact by Vacuum Excitation
Authors:
Jared Lawson,
Madison Veliky,
Colette P. Abah,
Mary S. Dietrich,
Rohan Chitale,
Nabil Simaan
Abstract:
Objective: The objective of this work is to introduce and demonstrate the effectiveness of a novel sensing modality for contact detection between an off-the-shelf aspiration catheter and a thrombus. Methods: A custom robotic actuator with a pressure sensor was used to generate an oscillatory vacuum excitation and sense the pressure inside the extracorporeal portion of the catheter. Vacuum pressure…
▽ More
Objective: The objective of this work is to introduce and demonstrate the effectiveness of a novel sensing modality for contact detection between an off-the-shelf aspiration catheter and a thrombus. Methods: A custom robotic actuator with a pressure sensor was used to generate an oscillatory vacuum excitation and sense the pressure inside the extracorporeal portion of the catheter. Vacuum pressure profiles and robotic motion data were used to train a support vector machine (SVM) classification model to detect contact between the aspiration catheter tip and a mock thrombus. Validation consisted of benchtop accuracy verification, as well as user study comparison to the current standard of angiographic presentation. Results: Benchtop accuracy of the sensing modality was shown to be 99.67%. The user study demonstrated statistically significant improvement in identifying catheter-thrombus contact compared to the current standard. The odds ratio of successful detection of clot contact was 2.86 (p=0.03) when using the proposed sensory method compared to without it. Conclusion: The results of this work indicate that the proposed sensing modality can offer intraoperative feedback to interventionalists that can improve their ability to detect contact between the distal tip of a catheter and a thrombus. Significance: By offering a relatively low-cost technology that affords off-the-shelf aspiration catheters as clot-detecting sensors, interventionalists can improve the first-pass effect of the mechanical thrombectomy procedure while reducing procedural times and mental burden.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
The Next 700 ML-Enabled Compiler Optimizations
Authors:
S. VenkataKeerthy,
Siddharth Jain,
Umesh Kalvakuntla,
Pranav Sai Gorantla,
Rajiv Shailesh Chitale,
Eugene Brevdo,
Albert Cohen,
Mircea Trofin,
Ramakrishna Upadrasta
Abstract:
There is a growing interest in enhancing compiler optimizations with ML models, yet interactions between compilers and ML frameworks remain challenging. Some optimizations require tightly coupled models and compiler internals,raising issues with modularity, performance and framework independence. Practical deployment and transparency for the end-user are also important concerns. We propose ML-Comp…
▽ More
There is a growing interest in enhancing compiler optimizations with ML models, yet interactions between compilers and ML frameworks remain challenging. Some optimizations require tightly coupled models and compiler internals,raising issues with modularity, performance and framework independence. Practical deployment and transparency for the end-user are also important concerns. We propose ML-Compiler-Bridge to enable ML model development within a traditional Python framework while making end-to-end integration with an optimizing compiler possible and efficient. We evaluate it on both research and production use cases, for training and inference, over several optimization problems, multiple compilers and its versions, and gym infrastructures.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Task Arithmetic with LoRA for Continual Learning
Authors:
Rajas Chitale,
Ankit Vaidya,
Aditya Kane,
Archana Ghotkar
Abstract:
Continual learning refers to the problem where the training data is available in sequential chunks, termed "tasks". The majority of progress in continual learning has been stunted by the problem of catastrophic forgetting, which is caused by sequential training of the model on streams of data. Moreover, it becomes computationally expensive to sequentially train large models multiple times. To miti…
▽ More
Continual learning refers to the problem where the training data is available in sequential chunks, termed "tasks". The majority of progress in continual learning has been stunted by the problem of catastrophic forgetting, which is caused by sequential training of the model on streams of data. Moreover, it becomes computationally expensive to sequentially train large models multiple times. To mitigate both of these problems at once, we propose a novel method to continually train transformer-based vision models using low-rank adaptation and task arithmetic. Our method completely bypasses the problem of catastrophic forgetting, as well as reducing the computational requirement for training models on each task. When aided with a small memory of 10 samples per class, our method achieves performance close to full-set finetuning. We present rigorous ablations to support the prowess of our method.
△ Less
Submitted 4 November, 2023;
originally announced November 2023.
-
Model-Based Pose Estimation of Steerable Catheters under Bi-Plane Image Feedback
Authors:
Jared Lawson,
Rohan Chitale,
Nabil Simaan
Abstract:
Small catheters undergo significant torsional deflections during endovascular interventions. A key challenge in enabling robot control of these catheters is the estimation of their bending planes. This paper considers approaches for estimating these bending planes based on bi-plane image feedback. The proposed approaches attempt to minimize error between either the direct (position-based) or insta…
▽ More
Small catheters undergo significant torsional deflections during endovascular interventions. A key challenge in enabling robot control of these catheters is the estimation of their bending planes. This paper considers approaches for estimating these bending planes based on bi-plane image feedback. The proposed approaches attempt to minimize error between either the direct (position-based) or instantaneous (velocity-based) kinematics with the reconstructed kinematics from bi-plane image feedback. A comparison between these methods is carried out on a setup using two cameras in lieu of a bi-plane fluoroscopy setup. The results show that the position-based approach is less susceptible to segmentation noise and works best when the segment is in a non-straight configuration. These results suggest that estimation of the bending planes can be accompanied with errors under 30 degrees. Considering that the torsional buildup of these catheters can be more than 180 degrees, we believe that this method can be used for catheter control with improved safety due to the reduction of this uncertainty.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
