Showing 1–50 of 217 results for author: Chablat, D

Design of an innovative robotic surgical instrument for circular stapling

Authors: Paul Tucan, Nadim Al Hajjar, Calin Vaida, Alexandru Pusca, Tiberiu Antal, Corina Radu, Daniel Jucan, Adrian Pisla, Damien Chablat, Doina Pisla

Abstract: Esophageal cancer remains a highly aggressive malignancy with low survival rates, requiring advanced surgical interventions like esophagectomy. Traditional manual techniques, including circular staplers, face challenges such as limited precision, prolonged recovery times, and complications like leaks and tissue misalignment. This paper presents a novel robotic circular stapler designed to enhance… ▽ More Esophageal cancer remains a highly aggressive malignancy with low survival rates, requiring advanced surgical interventions like esophagectomy. Traditional manual techniques, including circular staplers, face challenges such as limited precision, prolonged recovery times, and complications like leaks and tissue misalignment. This paper presents a novel robotic circular stapler designed to enhance the dexterity in confined spaces, improve tissue alignment, and reduce post-operative risks. Integrated with a cognitive robot that serves as a surgeon's assistant, the surgical stapler uses three actuators to perform anvil motion, cutter/stapler motion and allows a 75-degree bending of the cartridge (distal tip). Kinematic analysis is used to compute the stapler tip's position, ensuring synchronization with a robotic system. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Journal ref: I4SDG 2025 $\times$ IFToMM for Sustainable Development Goals Workshop, IFToMM, Jun 2025, Villa San Giovanni Italy, Italy

A Pillbug-Inspired Morphing Mechanism Covered with Sliding Shells

Authors: Jieyu Wang, Yingzhong Tian, Fengfeng Xi, Damien Chablat, Jianing Lin, Gaoke Ren, Yinjun Zhao

Abstract: This research proposes a novel morphing structure with shells inspired by the movement of pillbugs. Instead of the pillbug body, a loopcoupled mechanism based on slider-crank mechanisms is utilized to achieve the rolling up and spreading motion. This mechanism precisely imitates three distinct curves that mimic the shape morphing of a pillbug. To decrease the degree-of-freedom (DOF) of the mechani… ▽ More This research proposes a novel morphing structure with shells inspired by the movement of pillbugs. Instead of the pillbug body, a loopcoupled mechanism based on slider-crank mechanisms is utilized to achieve the rolling up and spreading motion. This mechanism precisely imitates three distinct curves that mimic the shape morphing of a pillbug. To decrease the degree-of-freedom (DOF) of the mechanism to one, scissor mechanisms are added. 3D curved shells are then attached to the tracer points of the morphing mechanism to safeguard it from attacks while allowing it to roll. Through type and dimensional synthesis, a complete system that includes shells and an underlying morphing mechanism is developed. A 3D model is created and tested to demonstrate the proposed system's shape-changing capability. Lastly, a robot with two modes is developed based on the proposed mechanism, which can curl up to roll down hills and can spread to move in a straight line via wheels. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Journal ref: Advances in Mechanism and Machine Science and Engineering in China, Springer Nature Singapore, pp.423-435, 2025, Lecture Notes in Mechanical Engineering

An analysis of higher-order kinematics formalisms for an innovative surgical parallel robot

Authors: Calin Vaida, Iosif Birlescu, Bogdan Gherman, Daniel Condurache, Damien Chablat, Doina Pisla

Abstract: The paper presents a novel modular hybrid parallel robot for pancreatic surgery and its higher-order kinematics derived based on various formalisms. The classical vector, homogeneous transformation matrices and dual quaternion approaches are studied for the kinematic functions using both classical differentiation and multidual algebra. The algorithms for inverse kinematics for all three studied fo… ▽ More The paper presents a novel modular hybrid parallel robot for pancreatic surgery and its higher-order kinematics derived based on various formalisms. The classical vector, homogeneous transformation matrices and dual quaternion approaches are studied for the kinematic functions using both classical differentiation and multidual algebra. The algorithms for inverse kinematics for all three studied formalisms are presented for both differentiation and multidual algebra approaches. Furthermore, these algorithms are compared based on numerical stability, execution times and number and type of mathematical functions and operators contained in each algorithm. A statistical analysis shows that there is significant improvement in execution time for the algorithms implemented using multidual algebra, while the numerical stability is appropriate for all algorithms derived based on differentiation and multidual algebra. While the implementation of the kinematic algorithms using multidual algebra shows positive results when benchmarked on a standard PC, further work is required to evaluate the multidual algorithms on hardware/software used for the modular parallel robot command and control. △ Less

Submitted 27 March, 2025; originally announced March 2025.

Journal ref: Mechanism and Machine Theory, 2025, 209, pp.105986.

An innovative mixed reality approach for Robotics Surgery

Authors: Gabriela Rus, Nadim Al Hajjar, Ionut Zima, Calin Vaida, Corina Radu, Damien Chablat, Andra Ciocan, Doina Pîslă

Abstract: Robotic-assisted procedures offer numerous advantages over traditional approaches, including improved dexterity, reduced fatigue, minimized trauma, and superior outcomes. However, the main challenge of these systems remains the poor visualization and perception of the surgical field. The goal of this paper is to provide an innovative approach concerning an application able to improve the surgical… ▽ More Robotic-assisted procedures offer numerous advantages over traditional approaches, including improved dexterity, reduced fatigue, minimized trauma, and superior outcomes. However, the main challenge of these systems remains the poor visualization and perception of the surgical field. The goal of this paper is to provide an innovative approach concerning an application able to improve the surgical procedures offering assistance in both preplanning and intraoperative steps of the surgery. The system has been designed to offer a better understanding of the patient through techniques that provide medical images visualization, 3D anatomical structures perception and robotic planning. The application was designed to be intuitive and user friendly, providing an augmented reality experience through the Hololens 2 device. It was tested in laboratory conditions, yielding positive results. △ Less

Submitted 7 January, 2025; originally announced January 2025.

Journal ref: IOP Conference Series: Materials Science and Engineering, 2024, 1320 (1), pp.012010

Enhancing Otological Surgery: Co-Designing a Parallel Robot with Surgeon Input

Authors: Durgesh Haribhau Salunkhe, Guillaume Michel, Shivesh Kumar, Damien Chablat

Abstract: This work presents the development of a parallel manipulator used for otological surgery from the perspective of co-design. Co-design refers to the simultaneous involvement of the end-users (surgeons), stakeholders (designers, ergonomic experts, manufacturers), and experts from the fields of optimization and mechanisms. The role of each member is discussed in detail and the interactions between th… ▽ More This work presents the development of a parallel manipulator used for otological surgery from the perspective of co-design. Co-design refers to the simultaneous involvement of the end-users (surgeons), stakeholders (designers, ergonomic experts, manufacturers), and experts from the fields of optimization and mechanisms. The role of each member is discussed in detail and the interactions between the stakeholders are presented. Co-design facilitates a reduction in the parameter space considered during mechanism optimization, leading to a more efficient design process. Additionally, the co-design principles help avoid unforeseen errors and help in quicker adaptation of the proposed solution. △ Less

Submitted 6 August, 2024; originally announced August 2024.

Journal ref: Workshope ''Co-design in Robotics: Theory, Practice, and Challenges'' (ICRA 2024), May 2024, Yokohama, Japan

Continuous-Time Robust Control for Cancer Treatment Robots

Authors: Vlad Mihaly, Iosif Birlescu, Mircea Şuşcă, Damien Chablat, Petru Dobra

Abstract: The control system in surgical robots must ensure patient safety and real time control. As such, all the uncertainties which could appear should be considered into an extended model of the plant. After such an uncertain plant is formed, an adequate controller which ensures a minimum set of performances for each situation should be computed. As such, the continuous-time robust control paradigm is s… ▽ More The control system in surgical robots must ensure patient safety and real time control. As such, all the uncertainties which could appear should be considered into an extended model of the plant. After such an uncertain plant is formed, an adequate controller which ensures a minimum set of performances for each situation should be computed. As such, the continuous-time robust control paradigm is suitable for such scenarios. However, the problem is generally solved only for linear and time invariant plants. The main focus of the current paper is to include m-link serial surgical robots into Robust Control Framework by considering all nonlinearities as uncertainties. Moreover, the paper studies an incipient problem of numerical implementation of such control structures. △ Less

Submitted 23 July, 2024; originally announced July 2024.

Journal ref: Advances in Service and Industrial Robotics, 157, Springer Nature Switzerland, pp.175-183, 2024, Mechanisms and Machine Science

The control architecture of a spherical robot for Minimally Invasive Surgery

Authors: Gabriela Rus, Nadim Al Hajjar, Paul Tucan, Ionut Zima, Calin Vaida, Corina Radu, Daniel Jucan, Damien Chablat, Doina Pisla

Abstract: Control systems used in Minimally Invasive Surgery (MIS) play a crucial role in ensuring preci-sion and safety throughout procedures. This paper presents a control architecture developed for a robotic system designed for MIS operations. The modular structure of the control system allows for compatibility with a range of procedures in abdominal and thoracic regions. The proposed control system, emp… ▽ More Control systems used in Minimally Invasive Surgery (MIS) play a crucial role in ensuring preci-sion and safety throughout procedures. This paper presents a control architecture developed for a robotic system designed for MIS operations. The modular structure of the control system allows for compatibility with a range of procedures in abdominal and thoracic regions. The proposed control system, employing the master-slave concept, is presented alongside the experimental model. Functional validation is obtained by performing a Siemens NX simulation and comparing the results with several experimental runs using the experimental model of the robot. With its compact size and stiffness, the system holds promise for integration with other robotic systems. Future efforts will be dedicated to exploring and optimizing this potential collaboration to enhance the overall capabilities of robotic-assisted surgery. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Journal ref: 6th IFToMM Symposium on Mechanism Design for Robotics, Jun 2024, Timi{\c s}oara, Romania

Comparison of robot morphologies and base positioning for welding applications

Authors: Nicolas Gautier, Yves Guillermit, Yazid Sebsadji, Mathieu Porez, Damien Chablat

Abstract: This article undertakes a comprehensive examination of two distinct robot morphologies: the PUMA-type arm (Programmable Universal Machine for Assembly) and the UR-type robot (Universal Robots). The primary aim of this comparative analysis is to assess their respective performances within the specialized domain of welding, focusing on predefined industrial application scenarios. These scenarios enc… ▽ More This article undertakes a comprehensive examination of two distinct robot morphologies: the PUMA-type arm (Programmable Universal Machine for Assembly) and the UR-type robot (Universal Robots). The primary aim of this comparative analysis is to assess their respective performances within the specialized domain of welding, focusing on predefined industrial application scenarios. These scenarios encompass a range of geometrical components earmarked for welding, along with specified welding paths, spatial constraints, and welding methodologies reflective of real-world scenarios encountered by manual welders. The case studies presented in this research serve as illustrative examples of Weez-U Welding practices, providing insights into the practical implications of employing different robot morphologies. Moreover, this study distinguishes between various base positions for the robot, thereby aiding welders in selecting the optimal base placement aligned with their specific welding objectives. By offering such insights, this research facilitates the selection of the most suitable architecture for this particular range of trajectories, thus optimizing welding efficiency and effectiveness. A departure from conventional methodologies, this study goes beyond merely considering singularities and also delves into the analysis of collisions between the robot and its environment, contingent upon the robot's posture. This holistic approach offers a more nuanced understanding of the challenges and considerations inherent in deploying robotic welding systems, providing valuable insights for practitioners and researchers alike in the field of robotic welding technology. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, Aug 2024, Washignton DC, United States

Kinematic analysis of a parallel robot for minimally invasive surgery

Authors: Calin Vaida, Bogdan Gherman, Iosif Birlescu, Paul Tucan, Alexandru Pusca, Gabriela Rus, Damien Chablat, Doina Pisla

Abstract: The paper presents the kinematic modelling for the coupled motion of a 6-DOF surgical parallel robot PARA-SILSROB which guides a mobile platform carrying the surgical instruments, and the actuators of the sub-modules which hold these tools. To increase the surgical procedure safety, a closed form solution for the kinematic model is derived and then, the forward and inverse kinematic models for the… ▽ More The paper presents the kinematic modelling for the coupled motion of a 6-DOF surgical parallel robot PARA-SILSROB which guides a mobile platform carrying the surgical instruments, and the actuators of the sub-modules which hold these tools. To increase the surgical procedure safety, a closed form solution for the kinematic model is derived and then, the forward and inverse kinematic models for the mobile orientation platform are obtained. The kinematic models are used in numerical simulations for the reorientation of the endoscopic camera, which imposes an automated compensatory motion from the active instruments' mod-ules. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Journal ref: 19th International Symposium on Advances in Robot Kinematics, Springer, 2024

Motion Prediction with Gaussian Processes for Safe Human-Robot Interaction in Virtual Environments

Authors: Stanley Mugisha, Vamsi Krishna Guda, Christine Chevallereau, Damien Chablat, Matteo Zoppi

Abstract: Humans use collaborative robots as tools for accomplishing various tasks. The interaction between humans and robots happens in tight shared workspaces. However, these machines must be safe to operate alongside humans to minimize the risk of accidental collisions. Ensuring safety imposes many constraints, such as reduced torque and velocity limits during operation, thus increasing the time to accom… ▽ More Humans use collaborative robots as tools for accomplishing various tasks. The interaction between humans and robots happens in tight shared workspaces. However, these machines must be safe to operate alongside humans to minimize the risk of accidental collisions. Ensuring safety imposes many constraints, such as reduced torque and velocity limits during operation, thus increasing the time to accomplish many tasks. However, for applications such as using collaborative robots as haptic interfaces with intermittent contacts for virtual reality applications, speed limitations result in poor user experiences. This research aims to improve the efficiency of a collaborative robot while improving the safety of the human user. We used Gaussian process models to predict human hand motion and developed strategies for human intention detection based on hand motion and gaze to improve the time for the robot and human security in a virtual environment. We then studied the effect of prediction. Results from comparisons show that the prediction models improved the robot time by 3\% and safety by 17\%. When used alongside gaze, prediction with Gaussian process models resulted in an improvement of the robot time by 2\% and the safety by 13\%. △ Less

Submitted 18 May, 2024; v1 submitted 15 May, 2024; originally announced May 2024.

Comments: 16 pages

ACM Class: I.2.6; I.2.9; I.3.2; H.5.2

Accuracy and repeatability of a parallel robot for personalised minimally invasive surgery

Authors: Doina Pisla, Paul Tucan, Damien Chablat, Nadim Al Hajjar, Andra Ciocan, Adrian Pisla, Alexandru Pusca, Corina Radu, Grigore Pop, Bogdan Gherman

Abstract: The paper presents the methodology used for accuracy and repeatability measurements of the experimental model of a parallel robot developed for surgical applications. The experimental setup uses a motion tracking system (for accuracy) and a high precision measuring arm for position (for repeatability). The accuracy was obtained by comparing the trajectory data from the experimental measurement wit… ▽ More The paper presents the methodology used for accuracy and repeatability measurements of the experimental model of a parallel robot developed for surgical applications. The experimental setup uses a motion tracking system (for accuracy) and a high precision measuring arm for position (for repeatability). The accuracy was obtained by comparing the trajectory data from the experimental measurement with a baseline trajectory defined with the kinematic models of the parallel robotic system. The repeatability was experi-mentally determined by moving (repeatedly) the robot platform in predefined points. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Journal ref: 33rd International Conference on Robotics in Alpe-Adria-Danube Region, Springer, 2024

On the Certification of the Kinematics of 3-DOF Spherical Parallel Manipulators

Authors: Alexandre Lê, Guillaume Rance, Fabrice Rouillier, Damien Chablat

Abstract: This paper aims to study a specific kind of parallel robot: Spherical Parallel Manipulators (SPM) that are capable of unlimited rolling. A focus is made on the kinematics of such mechanisms, especially taking into account uncertainties (e.g. on conception & fabrication parameters, measures) and their propagations. Such considerations are crucial if we want to control our robot correctly without an… ▽ More This paper aims to study a specific kind of parallel robot: Spherical Parallel Manipulators (SPM) that are capable of unlimited rolling. A focus is made on the kinematics of such mechanisms, especially taking into account uncertainties (e.g. on conception & fabrication parameters, measures) and their propagations. Such considerations are crucial if we want to control our robot correctly without any undesirable behavior in its workspace (e.g. effects of singularities). In this paper, we will consider two different approaches to study the kinematics and the singularities of the robot of interest: symbolic and semi-numerical. By doing so, we can compute a singularity-free zone in the work- and joint spaces, considering given uncertainties on the parameters. In this zone, we can use any control law to inertially stabilize the upper platform of the robot. △ Less

Submitted 6 May, 2024; v1 submitted 5 March, 2024; originally announced March 2024.

Improving Welding Robotization via Operator Skill Identification, Modeling, and Human-Machine Collaboration: Experimental Protocol Implementation

Authors: Antoine Lénat, Olivier Cheminat, Damien Chablat, Camilo Charron

Abstract: The industry of the future, also known as Industry 5.0, aims to modernize production tools, digitize workshops, and cultivate the invaluable human capital within the company. Industry 5.0 can't be done without fostering a workforce that is not only technologically adept but also has enhanced skills and knowledge. Specifically, collaborative robotics plays a key role in automating strenuous or repe… ▽ More The industry of the future, also known as Industry 5.0, aims to modernize production tools, digitize workshops, and cultivate the invaluable human capital within the company. Industry 5.0 can't be done without fostering a workforce that is not only technologically adept but also has enhanced skills and knowledge. Specifically, collaborative robotics plays a key role in automating strenuous or repetitive tasks, enabling human cognitive functions to contribute to quality and innovation. In manual manufacturing, however, some of these tasks remain challenging to automate without sacrificing quality. In certain situations, these tasks require operators to dynamically organize their mental, perceptual, and gestural activities. In other words, skills that are not yet adequately explained and digitally modeled to allow a machine in an industrial context to reproduce them, even in an approximate manner. Some tasks in welding serve as a perfect example. Drawing from the knowledge of cognitive and developmental psychology, professional didactics, and collaborative robotics research, our work aims to find a way to digitally model manual manufacturing skills to enhance the automation of tasks that are still challenging to robotize. Using welding as an example, we seek to develop, test, and deploy a methodology transferable to other domains. The purpose of this article is to present the experimental setup used to achieve these objectives. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Journal ref: International Conference on Human-Computer Interaction, Springer, 2024

Workspace Analysis for Laparoscopic Rectal Surgery : A Preliminary Study

Authors: Alexandra Thomieres, Dhruva Khanzode, Emilie Duchalais, Ranjan Jha, Damien Chablat

Abstract: The integration of medical imaging, computational analysis, and robotic technology has brought about a significant transformation in minimally invasive surgical procedures, particularly in the realm of laparoscopic rectal surgery (LRS). This specialized surgical technique, aimed at addressing rectal cancer, requires an in-depth comprehension of the spatial dynamics within the narrow space of the p… ▽ More The integration of medical imaging, computational analysis, and robotic technology has brought about a significant transformation in minimally invasive surgical procedures, particularly in the realm of laparoscopic rectal surgery (LRS). This specialized surgical technique, aimed at addressing rectal cancer, requires an in-depth comprehension of the spatial dynamics within the narrow space of the pelvis. Leveraging Magnetic Resonance Imaging (MRI) scans as a foundational dataset, this study incorporates them into Computer-Aided Design (CAD) software to generate precise three-dimensional (3D) reconstructions of the patient's anatomy. At the core of this research is the analysis of the surgical workspace, a critical aspect in the optimization of robotic interventions. Sophisticated computational algorithms process MRI data within the CAD environment, meticulously calculating the dimensions and contours of the pelvic internal regions. The outcome is a nuanced understanding of both viable and restricted zones during LRS, taking into account factors such as curvature, diameter variations, and potential obstacles. This paper delves deeply into the complexities of workspace analysis for robotic LRS, illustrating the seamless collaboration between medical imaging, CAD software, and surgical robotics. Through this interdisciplinary approach, the study aims to surpass traditional surgical methodologies, offering novel insights for a paradigm shift in optimizing robotic interventions within the complex environment of the pelvis. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Journal ref: 33rd International Conference on Robotics in Alpe-Adria-Danube Region, 2024

Mixed-Reality-Guided Teleoperation of a Collaborative Robot for Surgical Procedures

Authors: Gabriela Rus, Nadim Al Hajjar, Paul Tucan, Andra Ciocan, Calin Vaida, Corina Radu, Damien Chablat, Doina Pisla

Abstract: The development of advanced surgical systems embedding the Master-Slave control strategy introduced the possibility of remote interaction between the surgeon and the patient, also known as teleoperation. The present paper aims to integrate innovative technologies into the teleoperation process to enhance workflow during surgeries. The proposed system incorporates a collaborative robot, Kuka IIWA L… ▽ More The development of advanced surgical systems embedding the Master-Slave control strategy introduced the possibility of remote interaction between the surgeon and the patient, also known as teleoperation. The present paper aims to integrate innovative technologies into the teleoperation process to enhance workflow during surgeries. The proposed system incorporates a collaborative robot, Kuka IIWA LBR, and Hololens 2 (an augmented reality device), allowing the user to control the robot in an expansive environment that integrates actual (real data) with additional digital information imported via Hololens 2. Experimental data demonstrate the user's ability to control the Kuka IIWA using various gestures to position it with respect to real or digital objects. Thus, this system offers a novel solution to manipulate robots used in surgeries in a more intuitive manner, contributing to the reduction of the learning curve for surgeons. Calibration and testing in multiple scenarios demonstrate the efficiency of the system in providing seamless movements. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Journal ref: 33rd International Conference on Robotics in Alpe-Adria-Danube Region, 2024

Inertial Line-Of-Sight Stabilization Using a 3-DOF Spherical Parallel Manipulator with Coaxial Input Shafts

Authors: Alexandre Le, Guillaume Rance, Fabrice Rouillier, Damien Chablat

Abstract: This article dives into the use of a 3-RRR Spherical Parallel Manipulator (SPM) for the purpose of inertial Line Of Sight (LOS) stabilization. Such a parallel robot provides three Degrees of Freedom (DOF) in orientation and is studied from the kinematic point of view. In particular, one guarantees that the singular loci (with the resulting numerical instabilities and inappropriate behavior of the… ▽ More This article dives into the use of a 3-RRR Spherical Parallel Manipulator (SPM) for the purpose of inertial Line Of Sight (LOS) stabilization. Such a parallel robot provides three Degrees of Freedom (DOF) in orientation and is studied from the kinematic point of view. In particular, one guarantees that the singular loci (with the resulting numerical instabilities and inappropriate behavior of the mechanism) are far away from the prescribed workspace. Once the kinematics of the device is certified, a control strategy needs to be implemented in order to stabilize the LOS through the upper platform of the mechanism. Such a work is done with MATLAB Simulink using a SimMechanics model of our robot. △ Less

Submitted 2 January, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Comments: OPTRO Conference 2024 (11th International Symposium on Optronics in Defense & Security, 2024), 11 pages, 16 figures

A new 3-DOF 2T1R parallel mechanism: Topology design and kinematics

Authors: Huiping Shen, Zhongqiu Du, Damien Chablat, Ju Li, Guanglei Wu

Abstract: This article presents a new three-degree-of-freedom (3-DOF) parallel mechanism (PM) with two translations and one rotation (2T1R), designed based on the topological design theory of the parallel mechanism using position and orientation characteristics (POC). The PM is primarily intended for use in package sorting and delivery. The mobile platform of the PM moves along a translation axis, picks up… ▽ More This article presents a new three-degree-of-freedom (3-DOF) parallel mechanism (PM) with two translations and one rotation (2T1R), designed based on the topological design theory of the parallel mechanism using position and orientation characteristics (POC). The PM is primarily intended for use in package sorting and delivery. The mobile platform of the PM moves along a translation axis, picks up objects from a conveyor belt, and tilts them to either side of the axis. We first calculate the PM's topological characteristics, such as the degree of freedom (DOF) and the degree of coupling, and provide its topological analytical formula to represent the topological information of the PM. Next, we solve the direct and inverse kinematic models based on the kinematic modelling principle using the topological features. The models are purely analytic and are broken down into a series of quadratic equations, making them suitable for use in an industrial robot. We also study the singular configurations to identify the serial and parallel singularities. Using the decoupling properties, we size the mechanism to address the package sorting and depositing problem using an algebraic approach. To determine the smallest segment lengths, we use a cylindrical algebraic decomposition to solve a system with inequalities. △ Less

Submitted 22 June, 2023; originally announced June 2023.

Comments: IDETC-CIE 2023 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME, Aug 2023, Boston, France

A review of cuspidal serial and parallel manipulators

Authors: Philippe Wenger, Damien Chablat

Abstract: Cuspidal robots can move from one inverse or direct kinematic solution to another without ever passing through a singularity. These robots have remained unknown because almost all industrial robots do not have this feature. However, in fact, industrial robots are the exceptions. Some robots appeared recently in the industrial market can be shown to be cuspidal but, surprisingly, almost nobody know… ▽ More Cuspidal robots can move from one inverse or direct kinematic solution to another without ever passing through a singularity. These robots have remained unknown because almost all industrial robots do not have this feature. However, in fact, industrial robots are the exceptions. Some robots appeared recently in the industrial market can be shown to be cuspidal but, surprisingly, almost nobody knows it and robot users meet difficulties in planning trajectories with these robots. This paper proposes a review on the fundamental and application aspects of cuspidal robots. It addresses the important issues raised by these robots for the design and planning of trajectories. The identification of all cuspidal robots is still an open issue. This paper recalls in details the case of serial robots with three joints but it also addresses robots with more complex architectures such as 6-revolute-jointed robot and parallel robots. We hope that this paper will help disseminate more widely knowledge on cuspidal robots. △ Less

Submitted 11 October, 2022; originally announced October 2022.

Journal ref: Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, 2022, pp.1-37

Cin{é}matique d'une Proth{è}se de Main Myo{é}lectrique Accessible avec Actionneur Unique et R{é}tropulsion Passive du Pouce

Authors: Côme Butin, Damien Chablat, Yannick Aoustin, David Gouaillier

Abstract: This work proposes a new kinematics of a myoelectric hand prosthesis with a single actuator, allowing to realize the tridigital grip but also the lateral grip. Inspired by tridigital prostheses, which are simpler, more robust and less expensive than polydigital prostheses, this new kinematics aims at proposing an accessible prosthesis (affordable, easy-to-use, robust, easy-to-repair). Cables are u… ▽ More This work proposes a new kinematics of a myoelectric hand prosthesis with a single actuator, allowing to realize the tridigital grip but also the lateral grip. Inspired by tridigital prostheses, which are simpler, more robust and less expensive than polydigital prostheses, this new kinematics aims at proposing an accessible prosthesis (affordable, easy-to-use, robust, easy-to-repair). Cables are used instead of a rigid rod to transmit the movement bewteen the upper fingers and the thumb. The methods and design choices are detailed in this article. To conclude, the evaluation of the prototype by an experimented user leads to a first discussion of the results. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Comments: in French language. Congrès Français de Mécanique, Aug 2022, Nantes, France

Stability analysis of tensegrity mechanism coupled with a bio-inspired piping inspection robot

Authors: Swaminath Venkateswaran, Damien Chablat

Abstract: Piping inspection robots play an essential role for industries as they can reduce human effort and pose a lesser risk to their lives. Generally, the locomotion techniques of these robots can be classified into mechanical and bioinspired. By using slot-follower leg mechanisms, DC-motors, and control units, a rigid caterpillar type inspection robot was designed and developed at LS2N, France . This r… ▽ More Piping inspection robots play an essential role for industries as they can reduce human effort and pose a lesser risk to their lives. Generally, the locomotion techniques of these robots can be classified into mechanical and bioinspired. By using slot-follower leg mechanisms, DC-motors, and control units, a rigid caterpillar type inspection robot was designed and developed at LS2N, France . This rigid prototype helped in identifying the static forces required to accomplish good contact forces with the pipeline walls. In order to work inside curvatures, a tensegrity mechanism that uses three tension springs and a passive universal joint was introduced between each module of this robot. The optimal parameters of the robot assembly were identified by considering a preload of the cables, which ensured the stability of the entire robot. However, under static conditions, there exist some forces on the robot, especially on the tensegrity mechanism when one end of the leg mechanism is clamped with the pipeline walls. These forces are dominant when the orientation of the pipeline is horizontal. The objective of this article is to understand the effect of the stiffness of the spring on the static stability of the tensegrity mechanism under the self-weight of the robot assembly. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Stacked Tensegrity Mechanism for Medical Application

Authors: Dhruva Khanzode, Ranjan Jha, Emilie Duchalais, Damien Chablat

Abstract: In this article a multi-segmented planar tensegrity mechanism was presented. This mechanism has a three-segment structure with each segment residing on top of another. The size of the segments may decrease proportionally from base to top, resulting in a tapered shape from base to tip like an elephant trunk. The system was mechanically formulated as having linear springs and cables functioning as a… ▽ More In this article a multi-segmented planar tensegrity mechanism was presented. This mechanism has a three-segment structure with each segment residing on top of another. The size of the segments may decrease proportionally from base to top, resulting in a tapered shape from base to tip like an elephant trunk. The system was mechanically formulated as having linear springs and cables functioning as actuators. The singularities, as well as the stability of the parallel mechanism, were analyzed by using the principle of minimum energy. Optimization was also done to obtain the greatest angular deflection for a segment according to a ratio between the size of the base and the moving platform of the robotic system. The result of this work is a family of mechanisms that can generate the same workspace for different stability properties. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Journal ref: Advances in Robot Kinematics 2022, 2022

Design of a robot for the automatic charging of an electric car

Authors: Damien Chablat, Riccardo Mattacchione, Erika Ottaviano

Abstract: In this paper, a robot with parallel architecture is proposed for charging an electric vehicle having the charging socket on its front side. Kinematic models are developed to design the robot for a given workspace that corresponds to the car's plug placements. A demonstrator composed by commercial components is shown. In this paper, a robot with parallel architecture is proposed for charging an electric vehicle having the charging socket on its front side. Kinematic models are developed to design the robot for a given workspace that corresponds to the car's plug placements. A demonstrator composed by commercial components is shown. △ Less

Submitted 31 March, 2022; originally announced March 2022.

Journal ref: ROMANSY 24 - Robot Design, Dynamics and Control, Springer, 2022

Deciding Cuspidality of Manipulators through Computer Algebra and Algorithms in Real Algebraic Geometry

Authors: Damien Chablat, Rémi Prébet, Mohab Safey El Din, Durgesh Salunkhe, Philippe Wenger

Abstract: Cuspidal robots are robots with at least two inverse kinematic solutions that can be connected by a singularity-free path. Deciding the cuspidality of generic 3R robots has been studied in the past, but extending the study to six-degree-of-freedom robots can be a challenging problem. Many robots can be modeled as a polynomial map together with a real algebraic set so that the notion of cuspidality… ▽ More Cuspidal robots are robots with at least two inverse kinematic solutions that can be connected by a singularity-free path. Deciding the cuspidality of generic 3R robots has been studied in the past, but extending the study to six-degree-of-freedom robots can be a challenging problem. Many robots can be modeled as a polynomial map together with a real algebraic set so that the notion of cuspidality can be extended to these data. In this paper we design an algorithm that, on input a polynomial map in $n$ indeterminates, and $s$ polynomials in the same indeterminates describing a real algebraic set of dimension $d$, decides the cuspidality of the restriction of the map to the real algebraic set under consideration. Moreover, if $D$ and $τ$ are, respectively the maximum degree and the bound on the bit size of the coefficients of the input polynomials, this algorithm runs in time log-linear in $τ$ and polynomial in $((s+d)D)^{O(n^2)}$. It relies on many high-level algorithms in computer algebra which use advanced methods on real algebraic sets and critical loci of polynomial maps. As far as we know, this is the first algorithm that tackles the cuspidality problem from a general point of view. △ Less

Submitted 25 July, 2022; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: 10 pages, 4 figures, published in the Proceedings of ISSAC2022

MSC Class: 68W30; 14Q30 ACM Class: I.1.2; I.1.4

An efficient combined local and global search strategy for optimization of parallel kinematic mechanisms with joint limits and collision constraints

Authors: Haribhau Durgesh, Guillaume Michel, Shivesh Kumar, Marcello Sanguineti, Damien Chablat

Abstract: The optimization of parallel kinematic manipulators (PKM) involve several constraints that are difficult to formalize, thus making optimal synthesis problem highly challenging. The presence of passive joint limits as well as the singularities and self-collisions lead to a complicated relation between the input and output parameters. In this article, a novel optimization methodology is proposed by… ▽ More The optimization of parallel kinematic manipulators (PKM) involve several constraints that are difficult to formalize, thus making optimal synthesis problem highly challenging. The presence of passive joint limits as well as the singularities and self-collisions lead to a complicated relation between the input and output parameters. In this article, a novel optimization methodology is proposed by combining a local search, Nelder-Mead algorithm, with global search methodologies such as low discrepancy distribution for faster and more efficient exploration of the optimization space. The effect of the dimension of the optimization problem and the different constraints are discussed to highlight the complexities of closed-loop kinematic chain optimization. The work also presents the approaches used to consider constraints for passive joint boundaries as well as singularities to avoid internal collisions in such mechanisms. The proposed algorithm can also optimize the length of the prismatic actuators and the constraints can be added in modular fashion, allowing to understand the impact of given criteria on the final result. The application of the presented approach is used to optimize two PKMs of different degrees of freedom. △ Less

Submitted 24 February, 2022; originally announced February 2022.

Trajectory planning in Dynamics Environment : Application for Haptic Perception in Safe HumanRobot Interaction

Authors: A Gutierrez, V Guda, S Mugisha, C Chevallereau, Damien Chablat

Abstract: In a human-robot interaction system, the most important thing to consider is the safety of the user. This must be guaranteed in order to implement a reliable system. The main objective of this paper is to generate a safe motion scheme that takes into account the obstacles present in a virtual reality (VR) environment. The work is developed using the MoveIt software in ROS to control an industrial… ▽ More In a human-robot interaction system, the most important thing to consider is the safety of the user. This must be guaranteed in order to implement a reliable system. The main objective of this paper is to generate a safe motion scheme that takes into account the obstacles present in a virtual reality (VR) environment. The work is developed using the MoveIt software in ROS to control an industrial robot UR5. Thanks to this, we will be able to set up the planning group, which is realized by the UR5 robot with a 6-sided prop and the base of the manipulator, in order to plan feasible trajectories that it will be able to execute in the environment. The latter is based on the interior of a vehicle, containing a person (which would be the user in this case) for which the configuration will also be made to be taken into account in the system. To do this, we first investigated the software's capabilities and options for path planning, as well as the different ways to execute the movements. We also compared the different trajectory planning algorithms that the software is capable of using in order to determine which one is best suited for the task. Finally, we proposed different mobility schemes to be executed by the robot depending on the situation it is facing. The first one is used when the robot has to plan trajectories in a safe space, where the only obstacle to avoid is the user's workspace. The second one is used when the robot has to interact with the user, where a dummy model represents the user's position as a function of time, which is the one to be avoided. △ Less

Submitted 23 February, 2022; originally announced February 2022.

Journal ref: 24TH INTERNATIONAL CONFERENCE ON HUMAN-COMPUTER INTERACTION, Jun 2022, Gothenburg, Sweden

Non-linear stiffness behavior of planar serial robotic manipulators

Authors: Wanda Zhao, Alexandr Klimchik, Anatol Pashkevich, Damien Chablat

Abstract: The paper focuses on the stiffness analysis of multi-link serial planar manipulators, which may demonstrate nonlinear stiffness behavior under the compressive loading. Two important cases are considered, where the manipulator has either a straight or non-straight initial configuration. It was proved that in the first case the loading may cause the buckling if it exceeds some critical value, and th… ▽ More The paper focuses on the stiffness analysis of multi-link serial planar manipulators, which may demonstrate nonlinear stiffness behavior under the compressive loading. Two important cases are considered, where the manipulator has either a straight or non-straight initial configuration. It was proved that in the first case the loading may cause the buckling if it exceeds some critical value, and the manipulator suddenly changes its straight shape and stiffness properties. For computing this critical force, a general eigenvalue-based technique was proposed that can be applied to any multi-link serial manipulator. For the second case dealing with non-straight initial configurations, a universal energy-based technique was applied that allowed to detect quasi-buckling phenomenon when it is observed very fast but not instant change of the manipulator shape and its stiffness coefficient under the loading. These results are illustrated by numerous examples of non-linear stiffness behavior of three-and four-link manipulators that are subjected to compressive force. △ Less

Submitted 17 February, 2022; originally announced February 2022.

Necessary and sufficient condition for a generic 3R serial manipulator to be cuspidal

Authors: Durgesh Haribhau Salunkhe, Christoforos Spartalis, Jose Capco, Damien Chablat, Philippe Wenger

Abstract: Cuspidal robots can travel from one inverse kinematic solution to another without meeting a singularity. The name cuspidal was coined based on the existence of a cusp point in the workspace of 3R serial robots. The existence of a cusp point was proved to be a necessary and sufficient condition for orthogonal robots to be cuspidal, but it was not possible to extend this condition to non-orthogonal… ▽ More Cuspidal robots can travel from one inverse kinematic solution to another without meeting a singularity. The name cuspidal was coined based on the existence of a cusp point in the workspace of 3R serial robots. The existence of a cusp point was proved to be a necessary and sufficient condition for orthogonal robots to be cuspidal, but it was not possible to extend this condition to non-orthogonal robots. The goal of this paper is to prove that this condition stands for any generic 3R robot. This result would give the designer more flexibility. In the presented work, the geometrical interpretation of the inverse kinematics of 3R robots is revisited and important observations on the nonsingular change of posture are noted. The paper presents a theorem regarding the existence of reduced aspects in any generic 3R serial robot. Based on these observations and on this theorem, we prove that the existence of a cusp point is a necessary and sufficient condition for any 3R generic robot to be cuspidal. △ Less

Submitted 17 February, 2022; originally announced February 2022.

Journal ref: Mechanism and Machine Theory, Elsevier, 2022, 171, pp.104729

A new simple dynamic muscle fatigue model and its validation

Authors: Liang Ma, Damien Chablat, Fouad Bennis, Wei Zhang

Abstract: Musculoskeletal disorder (MSD) is one of the major health problems in physical work especially in manual handling jobs. In several literatures, muscle fatigue is considered to be closely related to MSD, especially for muscle related disorders. In addition to many existing analysis techniques for muscle fatigue assessment and MSD risk analysis, in this paper, a new muscle fatigue model was proposed… ▽ More Musculoskeletal disorder (MSD) is one of the major health problems in physical work especially in manual handling jobs. In several literatures, muscle fatigue is considered to be closely related to MSD, especially for muscle related disorders. In addition to many existing analysis techniques for muscle fatigue assessment and MSD risk analysis, in this paper, a new muscle fatigue model was proposed. The new proposed model reflects the influence of external load, workload history, and individual differences. This model is simple in mathematics and can be easily applied in realtime calculation, such as the application in realtime virtual work simulation and evaluation. The new model was mathematically validated with 24 existing static models by comparing the calculated METs, and qualitatively or quantitatively validated with 3 existing dynamic models. The proposed model shows high or moderate similarities in predicting the METs with all the 24 static models. Validation results with the three dynamic models were also promising. The main limitation of the model is that it still lacks experimental validation for more dynamic situations. Relevance to industry Muscle fatigue is one of the main reasons causing MSDs in industry, especially for physical work. Correct evaluation of muscle fatigue is necessary to determine work-rest regimens and reduce the risks of MSD. △ Less

Submitted 4 January, 2022; originally announced January 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:0901.0222

Journal ref: International Journal of Industrial Ergonomics, Elsevier, 2009, 39 (1), pp.211-220

Geometric Atlas of the Middle Ear and Paranasal Sinuses for Robotic Applications

Authors: Guillaume Michel, Durgesh Salunkhe, Philippe Bordure, Damien Chablat

Abstract: In otolaryngologic surgery, more and more robots are being studied to meet the clinical needs of operating rooms. However, to help design and optimize these robots, the workspace must be precisely defined taking into account patient variability. The aim of this work is to define a geometric atlas of the middle ear and paranasal sinuses for endoscopic robotic applications. Scans of several patients… ▽ More In otolaryngologic surgery, more and more robots are being studied to meet the clinical needs of operating rooms. However, to help design and optimize these robots, the workspace must be precisely defined taking into account patient variability. The aim of this work is to define a geometric atlas of the middle ear and paranasal sinuses for endoscopic robotic applications. Scans of several patients of different ages and sexes were used to determine the average size of these workspaces, which are linked by the similar use of endoscopes in surgery. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Comments: Surgical Innovation, SAGE Publications (UK and US), 2021. arXiv admin note: text overlap with arXiv:2005.05599

Literature Review on Endoscopic Robotic Systems in Ear and Sinus Surgery

Authors: Guillaume Michel, Durgesh Haribhau Salunkhe, Philippe Bordure, Damien Chablat

Abstract: In otolaryngologic surgery, endoscopy is increasingly used to provide a better view of hard-to-reach areas and to promote minimally invasive surgery. However, the need to manipulate the endoscope limits the surgeon's ability to operate with only one instrument at a time. Currently, several robotic systems are being developed, demonstrating the value of robotic assistance in microsurgery. The aim o… ▽ More In otolaryngologic surgery, endoscopy is increasingly used to provide a better view of hard-to-reach areas and to promote minimally invasive surgery. However, the need to manipulate the endoscope limits the surgeon's ability to operate with only one instrument at a time. Currently, several robotic systems are being developed, demonstrating the value of robotic assistance in microsurgery. The aim of this literature review is to present and classify current robotic systems that are used for otological and endonasal applications. For these solutions, an analysis of the functionalities in relation to the surgeon's needs will be carried out in order to produce a set of specifications for the creation of new robots. △ Less

Submitted 28 September, 2021; originally announced September 2021.

Comments: Journal of Medical Devices, American Society of Mechanical Engineers (ASME), 2021

Redundancy Resolution in Kinematic Control of Serial Manipulators in Multi-Obstacle Environment

Authors: Wanda Zhao, Anatol Pashkevich, Damien Chablat

Abstract: The paper focuses on the redundancy resolution in kinematic control of a new type of serial manipulator composed of multiple tensegrity segments, which are moving in a multi-obstacle environment. The general problem is decomposed into two sub-problems, which deal with collision-free path planning for the robot end-effector and collision-free motion planning for the robot body. The first of them is… ▽ More The paper focuses on the redundancy resolution in kinematic control of a new type of serial manipulator composed of multiple tensegrity segments, which are moving in a multi-obstacle environment. The general problem is decomposed into two sub-problems, which deal with collision-free path planning for the robot end-effector and collision-free motion planning for the robot body. The first of them is solved via discrete dynamic programming, the second one is worked out using quadratic programming with mixed linear equality/nonequality constraints. Efficiency of the proposed technique is confirmed by simulation. △ Less

Submitted 2 August, 2021; originally announced August 2021.

Journal ref: 60th Advances in production management systems, APMS 2021, Sep 2021, Nantes, France

Non-linear stiffness modeling of multi-link compliant serial manipulator composed of multiple tensegrity segments

Authors: Wanda Zhao, Anatol Pashkevich, Damien Chablat

Abstract: The paper focuses on the stiffness modeling of a new type of compliant manipulator and its non-linear behavior while interacting with the environment. The manipulator under study is a serial mechanical structure composed of dualtriangle segments. The main attention is paid to the initial straight configuration which may suddenly change its shape under the loading. It was discovered that under the… ▽ More The paper focuses on the stiffness modeling of a new type of compliant manipulator and its non-linear behavior while interacting with the environment. The manipulator under study is a serial mechanical structure composed of dualtriangle segments. The main attention is paid to the initial straight configuration which may suddenly change its shape under the loading. It was discovered that under the external loading such manipulator may have six equilibrium configurations but only two of them are stable. In the neighborhood of these configurations, the manipulator behavior was analyzed using the Virtual Joint Method (VJM). This approach allowed us to propose an analytical technique for computing a critical force causing the buckling and evaluate the manipulator shape under the loading. A relevant simulation study confirmed the validity of the developed technique and its advantages in non-linear stiffness analysis. △ Less

Submitted 2 August, 2021; originally announced August 2021.

Journal ref: IEEE 2021 International Conference on Automation Science and Engineering, Aug 2021, Lyon, France

A new robotic hand based on the design of fingers with spatial motions

Authors: Pol Hamon, Damien Chablat, Franck Plestan

Abstract: This article presents a new hand architecture with three under-actuated fingers. Each finger performs spatial movements to achieve more complex and varied grasping than the existing planar-movement fingers. The purpose of this hand is to grasp complex-shaped workpieces as they leave the machining centres. Among the taxonomy of grips, cylindrical and spherical grips are often used to grasp heavy ob… ▽ More This article presents a new hand architecture with three under-actuated fingers. Each finger performs spatial movements to achieve more complex and varied grasping than the existing planar-movement fingers. The purpose of this hand is to grasp complex-shaped workpieces as they leave the machining centres. Among the taxonomy of grips, cylindrical and spherical grips are often used to grasp heavy objects. A combination of these two modes makes it possible to capture most of the workpieces machined with 5-axis machines. However, the change in grasping mode requires the fingers to reconfigure themselves to perform spatial movements. This solution requires the addition of two or three actuators to change the position of the fingers and requires sensors to recognize the shape of the workpiece and determine the type of grasp to be used. This article proposes to extend the notion of under-actuated fingers to spatial movements. After a presentation of the kinematics of the fingers, the problem of stability is discussed as well as the transmission of forces in this mechanism. The complete approach for calculating the stability conditions is presented from the study of Jacobian force transmission matrices. CAD representations of the hand and its behavior in spherical and cylindrical grips are presented. △ Less

Submitted 17 June, 2021; originally announced June 2021.

Journal ref: ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference., Aug 2021, Online, United States

A novel partially-decoupled translational parallel manipulator with symbolic kinematics, singularity identification and workspace determination

Authors: Huiping Shen, Yinan Zhao, Ju Li, Guanglei Wu, Damien Chablat

Abstract: This paper presents a novel three-degree-of-freedom (3-DOF) translational parallel manipulator (TPM) by using a topological design method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations. The proposed PM is only composed of lower-mobility joints and actuated prismatic joints, together with the investigations on three kinematic issues of importance. The fi… ▽ More This paper presents a novel three-degree-of-freedom (3-DOF) translational parallel manipulator (TPM) by using a topological design method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations. The proposed PM is only composed of lower-mobility joints and actuated prismatic joints, together with the investigations on three kinematic issues of importance. The first aspect pertains to geometric modeling of the TPM in connection with its topological characteristics, such as the POC, degree of freedom and coupling degree, from which its symbolic direct kinematic solutions are readily obtained. Moreover, the decoupled properties of input-output motions are directly evaluated without Jacobian analysis. Sequentially, based upon the inverse kinematics, the singular configurations of the TPM are identified, wherein the singular surfaces are visualized by means of a Gr{ö}bner based elimination operation. Finally, the workspace of the TPM is evaluated with a geometric approach. This 3-DOF TPM features less joints and links compared with the well-known Delta robot, which reduces the structural complexity. Its symbolic direct kinematics and partially-decoupled property will ease path planning and dynamic analysis. The TPM can be used for manufacturing large work pieces. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Journal ref: Mechanism and Machine Theory, Elsevier, 2021, 164, pp.104388

Kinematic Control of compliant serial manipulators composed of dual-triangles

Authors: Wanda Zhao, Anatol Pashkevich, Alexandr Klimchik, Damien Chablat

Abstract: The paper focuses on the kinematics control of a compliant serial manipulator composed of a new type of dualtriangle elastic segments. Some useful optimization techniques were applied to solve the geometric redundancy problem, ensure the stability of the manipulator configurations with respect to the external forces/torques applied to the endeffector. The efficiency of the developed control algori… ▽ More The paper focuses on the kinematics control of a compliant serial manipulator composed of a new type of dualtriangle elastic segments. Some useful optimization techniques were applied to solve the geometric redundancy problem, ensure the stability of the manipulator configurations with respect to the external forces/torques applied to the endeffector. The efficiency of the developed control algorisms is confirmed by simulation. △ Less

Submitted 19 February, 2021; originally announced February 2021.

Comments: arXiv admin note: text overlap with arXiv:2011.06912

Journal ref: 2021 International Conference on Computer, Control and Robotics (ICCCR), Jan 2021, Shanghai, China. pp.93-97

Shaking Force Balancing of the Orthoglide

Authors: Jing Geng, Vigen Arakelian, Damien Chablat

Abstract: The shaking force balancing is a well-known problem in the design of high-speed robotic systems because the variable dynamic loads cause noises, wear and fatigue of mechanical structures. Different solutions, for full or partial shaking force balancing, via internal mass redistribution or by adding auxiliary links were developed. The paper deals with the shaking force balancing of the Orthoglide.… ▽ More The shaking force balancing is a well-known problem in the design of high-speed robotic systems because the variable dynamic loads cause noises, wear and fatigue of mechanical structures. Different solutions, for full or partial shaking force balancing, via internal mass redistribution or by adding auxiliary links were developed. The paper deals with the shaking force balancing of the Orthoglide. The suggested solution based on the optimal acceleration control of the manipulator's common center of mass allows a significant reduction of the shaking force. Compared with the balancing method via adding counterweights or auxiliary substructures, the proposed method can avoid some drawbacks: the increase of the total mass, the overall size and the complexity of the mechanism, which become especially challenging for special parallel manipulators. Using the proposed motion control method, the maximal value of the total mass center acceleration is reduced, as a consequence, the shaking force of the manipulator decreases. The efficiency of the suggested method via numerical simulations carried out with ADAMS is demonstrated. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Journal ref: In: Zeghloul S., Laribi M., Sandoval Arevalo J. (eds) Advances in Service and Industrial Robotics. RAAD 2020. Mechanisms and Machine Science, vol 84. Springer, pp.227-234, 2020, 2211-0984

Mechanics of compliant serial manipulator composed of dual-triangle segments

Authors: Damien Chablat, Wanda Zhao, Anatol Pashkevich, Alexandr Klimchik

Abstract: The paper focuses on the mechanics of a compliant serial manipulator composed of new type of dual-triangle elastic segments. Both the analytical and numerical methods were used to find the manipulator stable and unstable equilibrium configurations, as well as to predict corresponding manipulator shapes. The stiffness analysis was carried on for both loaded and unloaded modes, the stiffness matrice… ▽ More The paper focuses on the mechanics of a compliant serial manipulator composed of new type of dual-triangle elastic segments. Both the analytical and numerical methods were used to find the manipulator stable and unstable equilibrium configurations, as well as to predict corresponding manipulator shapes. The stiffness analysis was carried on for both loaded and unloaded modes, the stiffness matrices were computed using the Virtual Joint Method (VJM). The results demonstrate that either buckling or quasi-buckling phenomenon may occur under the loading, if the manipulator corresponding initial configuration is straight or non-straight one. Relevant simulation results are presented that confirm the theoretical study. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Journal ref: 3rd International Conference on Control and Robots, Dec 2020, Tokyo, Japan

Evaluating the Effect of Crutch-using on Trunk Muscle Loads

Authors: Jing Chang, Wenrui Wang, Damien Chablat, Fouad Bennis

Abstract: As a traditional tool of external assistance, crutches play an important role in society. They have a wide range of applications to help either the elderly and disabled to walk or to treat certain illnesses or for post-operative rehabilitation. But there are many different types of crutches, including shoulder crutches and elbow crutches. How to choose has become an issue that deserves to be debat… ▽ More As a traditional tool of external assistance, crutches play an important role in society. They have a wide range of applications to help either the elderly and disabled to walk or to treat certain illnesses or for post-operative rehabilitation. But there are many different types of crutches, including shoulder crutches and elbow crutches. How to choose has become an issue that deserves to be debated. Because while crutches help people walk, they also have an impact on the body. Inappropriate choice of crutches or long-term misuse can lead to problems such as scoliosis. Previous studies were mainly experimental measurements or the construction of dynamic models to calculate the load on joints with crutches. These studies focus only on the level of the joints, ignoring the role that muscles play in this process. Although some also take into account the degree of muscle activation, there is still a lack of quantitative analysis. The traditional dynamic model can be used to calculate the load on each joint. However, due to the activation of the muscle, this situation only causes part of the load transmitted to the joint, and the work of the chair will compensate the other part of the load. Analysis at the muscle level allows a better understanding of the impact of crutches on the body. By comparing the levels of activation of the trunk muscles, it was found that the use of crutches for walking, especially a single crutch, can cause a large difference in the activation of the back muscles on the left and right sides, and this difference will cause muscle degeneration for a long time, leading to scoliosis. In this article taking scoliosis as an example, by analyzing the muscles around the spine, we can better understand the pathology and can better prevent diseases. The objective of this article is to analyze normal walking compared to walking with one or two crutches using OpenSim software to obtain the degree of activation of different muscles in order to analyze the impact of crutches on the body. △ Less

Submitted 25 August, 2020; originally announced August 2020.

Journal ref: 22nd International Conference on Human-Computer Interaction, 2020

A new RCM mechanism for an ear and facial surgical application

Authors: Guillaume Michel, Durgesh Salunkhe, Damien Chablat, Philippe Bordure

Abstract: Since the insertion area in the middle ear or in the sinus cavity is very narrow, the mobility of the endoscope is reduced to a rotation around a virtual point and a translation for the insertion of the camera. This article first presents the anatomy of these regions obtained from 3D scanning and then a mechanism based on the architecture of the agile eye coupled to a double parallelogram to creat… ▽ More Since the insertion area in the middle ear or in the sinus cavity is very narrow, the mobility of the endoscope is reduced to a rotation around a virtual point and a translation for the insertion of the camera. This article first presents the anatomy of these regions obtained from 3D scanning and then a mechanism based on the architecture of the agile eye coupled to a double parallelogram to create an RCM. This mechanism coupled with a positioning mechanism is used to handle an endoscope. This tool is used in parallel to the surgeon to allow him to have better rendering of the medium ear than the use of Binocular scope. The mechanism offers a wide working space without singularity whose borders are fixed by joint limits. This feature allows ergonomic positioning of the patient's head on the bed as well as for the surgeon and allows other applications such as sinus surgery. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Journal ref: Advances in Service and Industrial Robotics, In press

Branch-and-Bound Method for Just-in-Time Optimization of Radar Search Patterns

Authors: Yann Briheche, Frédéric Barbaresco, Fouad Bennis, Damien Chablat

Abstract: Electronic phased-array radars offer new possibilities for radar search pattern optimization by using bi-dimensional beam-forming and beam-steering. Radar search pattern optimization can be approximated as a set cover problem and solved using integer programming, while accounting for localized clutter and terrain masks in detection constraints. We present a set cover problem approximation for time… ▽ More Electronic phased-array radars offer new possibilities for radar search pattern optimization by using bi-dimensional beam-forming and beam-steering. Radar search pattern optimization can be approximated as a set cover problem and solved using integer programming, while accounting for localized clutter and terrain masks in detection constraints. We present a set cover problem approximation for time-budget minimization of radar search patterns, under constraints of range, detection probability and direction-specific scan update rates. Branch\&Bound is a classical optimization procedure for solving combinatorial problems. It is known mainly as an exact algorithm, but features interesting characteristics, making it particularly fit for solving optimization problems in real-time applications and producing just-in-time solutions. △ Less

Submitted 12 February, 2020; originally announced February 2020.

Journal ref: Nature-Inspired Methods for Metaheuristics Optimization, pp.465-488, 2020

A Translational Three-Degrees-of-Freedom Parallel Mechanism With Partial Motion Decoupling and Analytic Direct Kinematics

Authors: Huiping Shen, Damien Chablat, Boxiong Zeng, Ju Li, Guanglei Wu, Ting-Li Yang

Abstract: According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper studied a 3-DOF translational PM that has three advantages, i.e., (i) it consists of three fixed actuated prismatic joints, (ii) the PM has analytic solutions to the direct and inverse kinematic problems, and (iii) the PM is of partial motion… ▽ More According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper studied a 3-DOF translational PM that has three advantages, i.e., (i) it consists of three fixed actuated prismatic joints, (ii) the PM has analytic solutions to the direct and inverse kinematic problems, and (iii) the PM is of partial motion decoupling property. Firstly, the main topological characteristics, such as the POC, degree of freedom and coupling degree were calculated for kinematic modeling. Thanks to these properties, the direct and inverse kinematic problems can be readily solved. Further, the conditions of the singular configurations of the PM were analyzed which corresponds to its partial motion decoupling property. △ Less

Submitted 7 February, 2020; originally announced February 2020.

Comments: arXiv admin note: substantial text overlap with arXiv:1907.08432

Journal ref: Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, 2020, 12 (2)

Analyse du besoin en assistance robotique dans la chirurgie de l'oreille

Authors: G. Michel, D. Chablat, P. Bordure, F Péchereau, P Schegg

Abstract: Otologic surgery has some specificities compared to others surgeries. The anatomic working space is small, with various anatomical structures to preserve, like ossicles or facial nerve. This requires the use of microscope or endoscope. The microscope let the surgeon use both hands, but allows only direct vision. The endoscope leaves only one hand to the surgeon to use his tools, but provides a "fi… ▽ More Otologic surgery has some specificities compared to others surgeries. The anatomic working space is small, with various anatomical structures to preserve, like ossicles or facial nerve. This requires the use of microscope or endoscope. The microscope let the surgeon use both hands, but allows only direct vision. The endoscope leaves only one hand to the surgeon to use his tools, but provides a "fish-eye" vision. The rise of endoscopy these past few years has led to the development of numerous devices for the surgeon: the Robotol, first otological robot designed to performed some movements and hold an endoscope, or the Endofix Exo. Both devices need the hand of the surgeon to be moved. No robotic device allows the endoscope to be directed autonomously while the surgeon keeps both hands free to work, just like when he is working with a microscope. The objective of our work is to define the specific needs of the otological assistance surgery. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: in French

Journal ref: Congr{è}s Fran{\c c}ais de M{é}canique, Aug 2019, Brest, France

Etat de l'art des systèmes robotisés en vue d'une application pour la chirurgie otologique

Authors: M. Dreux, L Ginzburg, P. Bordure, D. Chablat, G. Michel

Abstract: This article deals with a patents state-of-the-art linked to our robotic system which holds an endoscope. In a first part, we analyze how the endoscope operates as well as we discover the environment where we wish to use it: the middle ear. In a second step, we establish a state-of-the-art on patents existing in the robotic and surgical fields. The approach is based on a specific search methodolog… ▽ More This article deals with a patents state-of-the-art linked to our robotic system which holds an endoscope. In a first part, we analyze how the endoscope operates as well as we discover the environment where we wish to use it: the middle ear. In a second step, we establish a state-of-the-art on patents existing in the robotic and surgical fields. The approach is based on a specific search methodology using keywords and classifications. Thanks to all the patents found, we gather them according their country and date of publication, and we are able to analyze the results. This study brings to light technical solutions invented in recent years and allows us to find an innovative research axis. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: in French. Congrès Français de Mécanique, Aug 2019, Brest, France

Key Features of the Coupled Hand-operated Balanced Manipulator (HOBM) and Lightweight Robot (LWR)

Authors: Yang Zhang, Vigen Arakelian, Baptiste Veron, Damien Chablat

Abstract: The paper deals with coupled systems including hand-operated balanced manipulators and lightweight robots. The aim of such a cooperation is to displace heavy payloads with less powerful robots. In other term, in the coupled system for handling of heavy payloads by a HOBM an operator is replaced by a LWR. The advantages of the coupled HOBM and LWR are disclosed and the optimal design of the coopera… ▽ More The paper deals with coupled systems including hand-operated balanced manipulators and lightweight robots. The aim of such a cooperation is to displace heavy payloads with less powerful robots. In other term, in the coupled system for handling of heavy payloads by a HOBM an operator is replaced by a LWR. The advantages of the coupled HOBM and LWR are disclosed and the optimal design of the cooperative workspace is discussed. Behavior of the coupled system in a static mode when the velocities the HOBM are limited does not present any special problems. In this mode, the inertial forces are significantly lower than the gravitational one. The payload is completely balanced by the HOBM and the LWR assumes the prescribed displacements with low load. However, in a dynamic mode, the HOBM with massive links creates additional loads on the LWR, which can be significant. The present study considers a method for determination of inertia effects of the HOBM on the LWR. The given numerical simulations show the significant increasing of the input torques due to the inertia forces of the HOBM. Behavior of the HOBM with cable lift and the LWR is also examined. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Journal ref: Advances in Mechanism and Machine Science, pp.2289-2298, 2019

NAVARO II, a Novel Scissor-Based Planar Parallel Robot 1

Authors: Damien Chablat, Luc Rolland

Abstract: This article presents a new variable actuation mechanism based on the 3-RPR parallel robot. This mechanismis an evolution of the NaVARo robot, a 3-RRR parallel robot, for which the second revolute joint of the threelegs is replaced by a scissor to obtain a larger working space and avoid the use of parallelograms to operate thesecond revolute joint. To obtain better spatial rigi… ▽ More This article presents a new variable actuation mechanism based on the 3-RPR parallel robot. This mechanismis an evolution of the NaVARo robot, a 3-RRR parallel robot, for which the second revolute joint of the threelegs is replaced by a scissor to obtain a larger working space and avoid the use of parallelograms to operate thesecond revolute joint. To obtain better spatial rigidity, the leg mechanism is constructed by placing the scissorsin an orthogonal plane to the plane of the manipulator displacement (3-RRR or even the 3-RPR). This geometricproperty brings the significant consequence of allowing the scissors to directly substitute the prismatic chains in the3-RPR and enjoy the same kinematics advantages for the overall robots as only one solution to the inverse kinematicmodel. From the Jacobian expression, surfaces of singularity can be calculated and presented in a compact form.The singularity equations are presented for a robot with a similar base and mobile platform. The properties of thescissors are then determined to have a prescribed regular workspace. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Journal ref: Journal of Mechanisms and Robotics, American Society of Mechanical Engineers, 2019, 11 (4), pp.044501

Topology design and analysis of a novel 3-translational parallel mechanism with analytical direct position solutions and partial motion decoupling

Authors: Boxiong Zeng, Ting-Li Yang, Huiping Shen, Damien Chablat

Abstract: According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper design a novel 3-translation (3T) PM that has three advantages, i.e., 1) it consists on three actuated prismatic joints, 2) the PM has analytical direct position solutions, and 3) the PM is of partial motion decoupling property. Firstly, the… ▽ More According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper design a novel 3-translation (3T) PM that has three advantages, i.e., 1) it consists on three actuated prismatic joints, 2) the PM has analytical direct position solutions, and 3) the PM is of partial motion decoupling property. Firstly, the main topological characteristics such as the POC, degree of freedom and coupling degree are calculated for kinematics modelling. Due to the special constraint feature of the 3-translation, the analytical direct position solutions of the PM can be directly obtained without needing to use one-dimensional search method. Further, the conditions of the singular configuration of the PM, as well as the singularity location inside the workspace are analyzed according to the inverse kinematics. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Aug 2019, Anaheim, United States

Automatic mobility analysis of parallel mechanisms: an algorithm approach based on position and orientation characteristic equations

Authors: Xiaorong Zhu, Huiping Shen, Chengqi Wu, Damien Chablat, Tingli Yang

Abstract: The determination of the mobility of parallel mechanisms (PM) is a fundamental problem. An automatic and intelligent analysis platform will be a significant tool for the design and optimization of mechanical systems. Based on the theory of position and orientation characteristics (POC) equations, a systematic approach to computer-aided mobility analysis of PMs is presented in this paper. First, a… ▽ More The determination of the mobility of parallel mechanisms (PM) is a fundamental problem. An automatic and intelligent analysis platform will be a significant tool for the design and optimization of mechanical systems. Based on the theory of position and orientation characteristics (POC) equations, a systematic approach to computer-aided mobility analysis of PMs is presented in this paper. First, a digital model for topological structures which has a mapping relationship with position and orientation characteristics of mechanism is proposed. It describes not only the dimension of the motion output, but also gives the mapping relationship between the output characteristic and the axis of the kinematic joints. Secondly, algorithmic rules are established that convert the union and intersection operations of POC into the binary logical operations and the automatic analysis of POC are realized. Then, the algorithm of the automatic mobility analysis of PMs and its implementation with VC++ are written .The mobility and its properties (POC) will also be analyzed and displayed automatically after introducing by users of the data of topological structures representation. Finally, typical examples are provided to show the effectiveness of the software platform. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Aug 2019, Anaheim, United States

Kinetostatic analysis and solution classification of a class of planar tensegrity mechanisms

Authors: Philippe Wenger, D. Chablat

Abstract: Tensegrity mechanisms are composed of rigid and tensile parts that are in equilibrium. They are interesting alternative designs for some applications, such as modelling musculo-skeleton systems. Tensegrity mechanisms are more difficult to analyze than classical mechanisms as the static equilibrium conditions that must be satisfied generally result in complex equations. A class of planar one-degree… ▽ More Tensegrity mechanisms are composed of rigid and tensile parts that are in equilibrium. They are interesting alternative designs for some applications, such as modelling musculo-skeleton systems. Tensegrity mechanisms are more difficult to analyze than classical mechanisms as the static equilibrium conditions that must be satisfied generally result in complex equations. A class of planar one-degree-of-freedom tensegrity mechanisms with three linear springs is analyzed in detail for the sake of systematic solution classifications. The kinetostatic equations are derived and solved under several loading and geometric conditions. It is shown that these mechanisms exhibit up to six equilibrium configurations, of which one or two are stable, depending on the geometric and loading conditions. Discriminant varieties and cylindrical algebraic decomposition combined with Groebner base elimination are used to classify solutions as a function of the geometric, loading and actuator input parameters. △ Less

Submitted 27 August, 2018; originally announced August 2018.

Journal ref: Robotica, Cambridge University Press, 2018, pp.1 - 11

Self-Motion of the 3-PPPS Parallel Robot with Delta-Shaped Base

Authors: D Chablat, E Ottaviano, S Venkateswaran

Abstract: This paper presents the kinematic analysis of the 3-PPPS parallel robot with an equi-lateral mobile platform and an equilateral-shaped base. Like the other 3-PPPS robots studied in the literature, it is proved that the parallel singularities depend only on the orientation of the end-effector. The quaternion parameters are used to represent the singularity surfaces. The study of the direct kinemati… ▽ More This paper presents the kinematic analysis of the 3-PPPS parallel robot with an equi-lateral mobile platform and an equilateral-shaped base. Like the other 3-PPPS robots studied in the literature, it is proved that the parallel singularities depend only on the orientation of the end-effector. The quaternion parameters are used to represent the singularity surfaces. The study of the direct kinematic model shows that this robot admits a self-motion of the Cardanic type. This explains why the direct kinematic model admits an infinite number of solutions in the center of the workspace at the "home" position but has never been studied until now. △ Less

Submitted 11 June, 2018; originally announced June 2018.

Comments: European Conference on Mechanism Science, Sep 2018, Aachen, Germany

Advancement of MSA-technique for stiffness modeling of serial and parallel robotic manipulators

Authors: Alexandr Klimchik, Damien Chablat, Anatol Pashkevich

Abstract: The paper presents advancement of the matrix structural analysis technique (MSA) for stiffness modeling of robotic manipulators. In contrast to the classical MSA, it can be applied to both parallel and serial manipulators composed of flexible and rigid links connected by rigid, passive or elastic joints with multiple external loadings. The manipulator stiffness model is presented as a set of basic… ▽ More The paper presents advancement of the matrix structural analysis technique (MSA) for stiffness modeling of robotic manipulators. In contrast to the classical MSA, it can be applied to both parallel and serial manipulators composed of flexible and rigid links connected by rigid, passive or elastic joints with multiple external loadings. The manipulator stiffness model is presented as a set of basic equations describing the link elasticities that are supplemented by a set of constraints describing connections between links. These equations are aggregated straightforwardly in a common linear system without traditional merging of the matrix rows and columns, which allows avoiding conventional manual transformations at the expense of numerical inversion of the sparse matrix of higher dimension. △ Less

Submitted 29 May, 2018; originally announced May 2018.

Journal ref: 22nd CISM IFToMM Symposium on Robot Design, Dynamics and Control , Jun 2018, Rennes, France. https://romansy2018.ls2n.fr/