-
Generative adversarial neural networks for simulating neutrino interactions
Authors:
Jose L. Bonilla,
Krzysztof M. Graczyk,
Artur M. Ankowski,
Rwik Dharmapal Banerjee,
Beata E. Kowal,
Hemant Prasad,
Jan T. Sobczyk
Abstract:
We propose a new approach to simulate neutrino scattering events as an alternative to the standard Monte Carlo generator approach. Generative adversarial neural network (GAN) models are developed to simulate charged current neutrino-carbon collisions in the few-GeV energy range. We consider a simplified framework to generate muon kinematic variables, specifically its energy and scattering angle. G…
▽ More
We propose a new approach to simulate neutrino scattering events as an alternative to the standard Monte Carlo generator approach. Generative adversarial neural network (GAN) models are developed to simulate charged current neutrino-carbon collisions in the few-GeV energy range. We consider a simplified framework to generate muon kinematic variables, specifically its energy and scattering angle. GAN models are trained on simulation data from \nuwro{} Monte Carlo event generator. Two GAN models have been obtained: one simulating quasielastic neutrino-nucleus scatterings and another simulating all interactions at given neutrino energy. The models work for neutrino energy ranging from 300 MeV to 10 GeV. The performance of both models has been assessed using two statistical metrics. It is shown that both GAN models successfully reproduce the distribution of muon kinematics.
△ Less
Submitted 27 June, 2025; v1 submitted 27 February, 2025;
originally announced February 2025.
-
Electron-nucleus cross sections from transfer learning
Authors:
Krzysztof M. Graczyk,
Beata E. Kowal,
Artur M. Ankowski,
Rwik Dharmapal Banerjee,
Jose Luis Bonilla,
Hemant Prasad,
Jan T. Sobczyk
Abstract:
Transfer learning (TL) allows a deep neural network (DNN) trained on one type of data to be adapted for new problems with limited information. We propose to use the TL technique in physics. The DNN learns the physics of one process, and after fine-tuning, it makes predictions for related processes. We consider the DNNs, trained on inclusive electron-carbon scattering data, and show that after fine…
▽ More
Transfer learning (TL) allows a deep neural network (DNN) trained on one type of data to be adapted for new problems with limited information. We propose to use the TL technique in physics. The DNN learns the physics of one process, and after fine-tuning, it makes predictions for related processes. We consider the DNNs, trained on inclusive electron-carbon scattering data, and show that after fine-tuning, they accurately predict cross sections for electron interactions with nuclear targets ranging from lithium to iron. The method works even when the DNN is fine-tuned on a small dataset.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
A Novel Heat Exchanger Design Method Using a Delayed Rejection Adaptive Metropolis Hasting Algorithm
Authors:
Ahad Mohammadi,
Javier Bonilla,
Reza Zarghami,
Shahab Golshan
Abstract:
In this study, a shell-and-tube heat exchanger (STHX) design based on seven continuous independent design variables is proposed. Delayed Rejection Adaptive Metropolis hasting (DRAM) was utilized as a powerful tool in the Markov chain Monte Carlo (MCMC) sampling method. This Reverse Sampling (RS) method was used to find the probability distribution of design variables of the shell and tube heat exc…
▽ More
In this study, a shell-and-tube heat exchanger (STHX) design based on seven continuous independent design variables is proposed. Delayed Rejection Adaptive Metropolis hasting (DRAM) was utilized as a powerful tool in the Markov chain Monte Carlo (MCMC) sampling method. This Reverse Sampling (RS) method was used to find the probability distribution of design variables of the shell and tube heat exchanger. Thanks to this probability distribution, an uncertainty analysis was also performed to find the quality of these variables. In addition, a decision-making strategy based on confidence intervals of design variables and on the Total Annual Cost (TAC) provides the final selection of design variables. Results indicated high accuracies for the estimation of design variables which leads to marginally improved performance compared to commonly used optimization methods. In order to verify the capability of the proposed method, a case of study is also presented, it shows that a significant cost reduction is feasible with respect to multi-objective and single-objective optimization methods. Furthermore, the selected variables have good quality (in terms of probability distribution) and a lower TAC was also achieved. Results show that the costs of the proposed design are lower than those obtained from optimization method reported in previous studies. The algorithm was also used to determine the impact of using probability values for the design variables rather than single values to obtain the best heat transfer area and pumping power. In particular, a reduction of the TAC up to 3.5% was achieved in the case considered.
△ Less
Submitted 19 September, 2018;
originally announced October 2018.
-
New approach for solar tracking systems based on computer vision, low cost hardware and deep learning
Authors:
Jose A. Carballo,
Javier Bonilla,
Manuel Berenguel,
Jesús Fernández-Reche,
Ginés García
Abstract:
In this work, a new approach for Sun tracking systems is presented. Due to the current system limitations regarding costs and operational problems, a new approach based on low cost, computer vision open hardware and deep learning has been developed. The preliminary tests carried out successfully in Plataforma solar de Almeria (PSA), reveal the great potential and show the new approach as a good al…
▽ More
In this work, a new approach for Sun tracking systems is presented. Due to the current system limitations regarding costs and operational problems, a new approach based on low cost, computer vision open hardware and deep learning has been developed. The preliminary tests carried out successfully in Plataforma solar de Almeria (PSA), reveal the great potential and show the new approach as a good alternative to traditional systems. The proposed approach can provide key variables for the Sun tracking system control like cloud movements prediction, block and shadow detection, atmospheric attenuation or measures of concentrated solar radiation, which can improve the control strategies of the system and therefore the system performance.
△ Less
Submitted 19 September, 2018;
originally announced September 2018.
-
Automatic Identification of Scenedesmus Polymorphic Microalgae from Microscopic Images
Authors:
Jhony-Heriberto Giraldo-Zuluaga,
Geman Diez,
Alexander Gomez,
Tatiana Martinez,
Mariana Peñuela Vasquez,
Jesus Francisco Vargas Bonilla,
Augusto Salazar
Abstract:
Microalgae counting is used to measure biomass quantity. Usually, it is performed in a manual way using a Neubauer chamber and expert criterion, with the risk of a high error rate. This paper addresses the methodology for automatic identification of Scenedesmus microalgae (used in the methane production and food industry) and applies it to images captured by a digital microscope. The use of contra…
▽ More
Microalgae counting is used to measure biomass quantity. Usually, it is performed in a manual way using a Neubauer chamber and expert criterion, with the risk of a high error rate. This paper addresses the methodology for automatic identification of Scenedesmus microalgae (used in the methane production and food industry) and applies it to images captured by a digital microscope. The use of contrast adaptive histogram equalization for pre-processing, and active contours for segmentation are presented. The calculation of statistical features (Histogram of Oriented Gradients, Hu and Zernike moments) with texture features (Haralick and Local Binary Patterns descriptors) are proposed for algae characterization. Scenedesmus algae can build coenobia consisting of 1, 2, 4 and 8 cells. The amount of algae of each coenobium helps to determine the amount of lipids, proteins, and other substances in a given sample of a algae crop. The knowledge of the quantity of those elements improves the quality of bioprocess applications. Classification of coenobia achieves accuracies of 98.63% and 97.32% with Support Vector Machine (SVM) and Artificial Neural Network (ANN), respectively. According to the results it is possible to consider the proposed methodology as an alternative to the traditional technique for algae counting. The database used in this paper is publicly available for download.
△ Less
Submitted 23 October, 2017; v1 submitted 21 December, 2016;
originally announced December 2016.
