Showing 1–13 of 13 results for author: Beach, M

A Heuristic-Integrated DRL Approach for Phase Optimization in Large-Scale RISs

Authors: Wei Wang, Peizheng Li, Angela Doufexi, Mark A. Beach

Abstract: Optimizing discrete phase shifts in large-scale reconfigurable intelligent surfaces (RISs) is challenging due to their non-convex and non-linear nature. In this letter, we propose a heuristic-integrated deep reinforcement learning (DRL) framework that (1) leverages accumulated actions over multiple steps in the double deep Q-network (DDQN) for RIS column-wise control and (2) integrates a greedy al… ▽ More Optimizing discrete phase shifts in large-scale reconfigurable intelligent surfaces (RISs) is challenging due to their non-convex and non-linear nature. In this letter, we propose a heuristic-integrated deep reinforcement learning (DRL) framework that (1) leverages accumulated actions over multiple steps in the double deep Q-network (DDQN) for RIS column-wise control and (2) integrates a greedy algorithm (GA) into each DRL step to refine the state via fine-grained, element-wise optimization of RIS configurations. By learning from GA-included states, the proposed approach effectively addresses RIS optimization within a small DRL action space, demonstrating its capability to optimize phase-shift configurations of large-scale RISs. △ Less

Submitted 7 May, 2025; originally announced May 2025.

Comments: 5 pages, 5 figures. This work has been accepted for publication in IEEE Communications Letters

A DRL-based Reflection Enhancement Method for RIS-assisted Multi-receiver Communications

Authors: Wei Wang, Peizheng Li, Angela Doufexi, Mark A Beach

Abstract: In reconfigurable intelligent surface (RIS)-assisted wireless communication systems, the pointing accuracy and intensity of reflections depend crucially on the 'profile,' representing the amplitude/phase state information of all elements in a RIS array. The superposition of multiple single-reflection profiles enables multi-reflection for distributed users. However, the optimization challenges from… ▽ More In reconfigurable intelligent surface (RIS)-assisted wireless communication systems, the pointing accuracy and intensity of reflections depend crucially on the 'profile,' representing the amplitude/phase state information of all elements in a RIS array. The superposition of multiple single-reflection profiles enables multi-reflection for distributed users. However, the optimization challenges from periodic element arrangements in single-reflection and multi-reflection profiles are understudied. The combination of periodical single-reflection profiles leads to amplitude/phase counteractions, affecting the performance of each reflection beam. This paper focuses on a dual-reflection optimization scenario and investigates the far-field performance deterioration caused by the misalignment of overlapped profiles. To address this issue, we introduce a novel deep reinforcement learning (DRL)-based optimization method. Comparative experiments against random and exhaustive searches demonstrate that our proposed DRL method outperforms both alternatives, achieving the shortest optimization time. Remarkably, our approach achieves a 1.2 dB gain in the reflection peak gain and a broader beam without any hardware modifications. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 6 pages, 6 figures. This paper has been accepted for presentation at the VTC2023-Fall

Federated Radio Frequency Fingerprinting with Model Transfer and Adaptation

Authors: Chuanting Zhang, Shuping Dang, Junqing Zhang, Haixia Zhang, Mark A. Beach

Abstract: The Radio frequency (RF) fingerprinting technique makes highly secure device authentication possible for future networks by exploiting hardware imperfections introduced during manufacturing. Although this technique has received considerable attention over the past few years, RF fingerprinting still faces great challenges of channel-variation-induced data distribution drifts between the training ph… ▽ More The Radio frequency (RF) fingerprinting technique makes highly secure device authentication possible for future networks by exploiting hardware imperfections introduced during manufacturing. Although this technique has received considerable attention over the past few years, RF fingerprinting still faces great challenges of channel-variation-induced data distribution drifts between the training phase and the test phase. To address this fundamental challenge and support model training and testing at the edge, we propose a federated RF fingerprinting algorithm with a novel strategy called model transfer and adaptation (MTA). The proposed algorithm introduces dense connectivity among convolutional layers into RF fingerprinting to enhance learning accuracy and reduce model complexity. Besides, we implement the proposed algorithm in the context of federated learning, making our algorithm communication efficient and privacy-preserved. To further conquer the data mismatch challenge, we transfer the learned model from one channel condition and adapt it to other channel conditions with only a limited amount of information, leading to highly accurate predictions under environmental drifts. Experimental results on real-world datasets demonstrate that the proposed algorithm is model-agnostic and also signal-irrelevant. Compared with state-of-the-art RF fingerprinting algorithms, our algorithm can improve prediction performance considerably with a performance gain of up to 15\%. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: This paper was accepted by IEEE INFOCOM 2023 Workshop (DeepWireless)

Recent Results on Proportional Fair Scheduling for mmWave-based Industrial Wireless Networks

Authors: Jiteng Ma, Adnan Aijaz, Mark Beach

Abstract: Millimeter wave (mmWave) communication has recently attracted significant attention from both industrial and academic communities. The large bandwidth availability as well as low interference nature of mmWave spectrum is particularly attractive for industrial communication. However, inherent challenges such as coverage and blockage of mmWave communication cause highly fluctuated channel quality. T… ▽ More Millimeter wave (mmWave) communication has recently attracted significant attention from both industrial and academic communities. The large bandwidth availability as well as low interference nature of mmWave spectrum is particularly attractive for industrial communication. However, inherent challenges such as coverage and blockage of mmWave communication cause highly fluctuated channel quality. This paper explores wireless medium access control (MAC) schedulers for mmWave-based industrial wireless applications. Our objective is to design a high-performance and enhanced fairness MAC scheduling algorithm that responds rapidly to channel variations. The key contribution of our work is a method to modify the standard proportional fair (SPF) scheduler. It introduces more flexibility and dynamic properties. Compared to the SPF, our enhanced proportional fair (EPF) scheduler not only improves the priority for users in poor channel conditions but also accelerates the reaction time in fluctuated channel conditions. By providing higher fairness for all users and enhancing system robustness, it particularly adapts to the scatter-rich industrial mmWave communication environment. Through extensive performance evaluation based on the widely accepted network simulator (ns-3), we show that the new scheduler achieves better performance in terms of delivering ultra-low latency and reliable services over mmWave-based industrial communication. △ Less

Submitted 11 July, 2020; originally announced July 2020.

Comments: Accepted for publication in IEEE VTC Fall 2020

Dimension Reduction-based Signal Compression for Uplink Distributed MIMO C-RAN with Limited Fronthaul Capacity

Authors: Fred Wiffen, Mohammud Z. Bocus, Woon Hau Chin, Angela Doufexi, Mark Beach

Abstract: This paper proposes a dimension reduction-based signal compression scheme for uplink distributed MIMO cloud radio access networks (C-RAN) with an overall excess of receive antennas, in which users are jointly served by distributed multi-antenna receivers connected to a central processor via individual finite-capacity fronthaul links. We first show that, under quantization noise-limited operation,… ▽ More This paper proposes a dimension reduction-based signal compression scheme for uplink distributed MIMO cloud radio access networks (C-RAN) with an overall excess of receive antennas, in which users are jointly served by distributed multi-antenna receivers connected to a central processor via individual finite-capacity fronthaul links. We first show that, under quantization noise-limited operation, applying linear dimension reduction at each receiver before compressing locally with a uniform quantization noise level results in a sum capacity that scales approximately linearly with fronthaul capacity, and can come within a fixed gap of the cut-set bound. The dimension reduction filters that maximize joint mutual information are then shown to be truncated forms of the conditional Karhunen-Loeve transform, with a block coordinate ascent algorithm for finding a stationary point given. Analysis and numerical results indicate that the signal dimension can be reduced without significant loss of information, particularly at high signal-to-noise ratio, preserving the benefits of using excess antennas. The method is then adapted for the case of imperfect channel state information at the receivers. The scheme significantly outperforms conventional local signal compression at all fronthaul rates, and with complexity linear in network size represents a scalable solution for distributed MIMO C-RAN systems. △ Less

Submitted 26 May, 2020; originally announced May 2020.

Massive Multiple Input Massive Multiple Output for 5G Wireless Backhauling

Authors: Dinh-Thuy Phan-Huy, Philippe Ratajczak, Raffaele D'Errico, Jan Jarvelainen, Di Kong, Katsuyuki Haneda, Berna Bulut, Aki Karttunen, Mark Beach, Evangelos Mellios, Mario Castaneda, Mythri Hunukumbure, Tommy Svensson

Abstract: In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other.… ▽ More In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other. Hundreds of data streams are spatially multiplexed through a short range and line of sight massive multiple input massive multiple output propagation channel thanks to a new low complexity spatial multiplexing scheme, called block discrete Fourier transform based spatial multiplexing with maximum ratio transmission. Its performance in real and existing environments is assessed using accurate ray-tracing tools and antenna models. In the best simulated scenario, 1.6 kbits per second per Hz of spectral efficiency is attained, corresponding to 80% of Singular Value Decomposition performance, with a transmitter and a receiver that are 200 and 10,000 times less complex, respectively. △ Less

Submitted 12 March, 2018; originally announced March 2018.

Comments: draft version of IEEE Globecom 2016 paper

Achievable Rates and Training Overheads for a Measured LOS Massive MIMO Channel

Authors: Paul Harris, Wael Boukley Hasan, Liang Liu, Steffen Malkowsky, Mark Beach, Simon Armour, Fredrik Tufvesson, Ove Edfors

Abstract: This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is f… ▽ More This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is formed which considers the 90% coherence time to evaluate the impact of MMIMO channel training overheads in high-speed LOS scenarios. It is shown that whilst 25% of the achievable zero-forcing (ZF) sumrate is lost when the resounding interval is increased by a factor of 4, the OFDM training overheads for a 100-antenna MMIMO BS using an LTE-like physical layer could be as low as 2% for a terminal speed of 90m/s. △ Less

Submitted 22 February, 2018; v1 submitted 9 November, 2017; originally announced November 2017.

Comments: 4 pages, 5 figures

Journal ref: IEEE Wireless Communications Letters 2018

Millimeter Wave Channel Measurements in a Railway Depot

Authors: Berna Bulut, Thomas Barratt, Di Kong, Jue Cao, Alberto Loaiza Freire, Simon Armour, Mark Beach

Abstract: Millimeter wave (mmWave) communication is a key enabling technology with the potential to deliver high capacity, high peak data rate communications for future railway services. Knowledge of the radio characteristics is of paramount importance for the successful deployment of such systems. In this paper mmWave channel measurements are reported for a railway environment using a wideband channel soun… ▽ More Millimeter wave (mmWave) communication is a key enabling technology with the potential to deliver high capacity, high peak data rate communications for future railway services. Knowledge of the radio characteristics is of paramount importance for the successful deployment of such systems. In this paper mmWave channel measurements are reported for a railway environment using a wideband channel sounder operating at 60GHz. Highly directional antennas are deployed at both ends of the link. Data is reported for path loss, root mean square (RMS) delay spread and K-factor. Static and mobile measurements are considered. Analysis shows that the signal strength is strongly dependent (up to 25dB) on the azimuth orientation of the directional transmit and receive antennas. A path loss exponent of n=2.04 was extracted from the Line-of-Sight measurements with optimally aligned antennas. RMS delay spreads ranged from 1ns to 22ns depending on antenna alignment. 50% of the measured K-factors were found to be less than 6dB. We conclude this is the result of ground reflections in the vertical Tx-Rx plane. △ Less

Submitted 30 June, 2018; v1 submitted 16 August, 2017; originally announced August 2017.

An Overview of Massive MIMO Research at the University of Bristol

Authors: Paul Harris, Wael Boukley Hasan, Henry Brice, Benny Chitambira, Mark Beach, Evangelos Mellios, Andrew Nix, Simon Armour, Angela Doufexi

Abstract: Massive MIMO has rapidly gained popularity as a technology crucial to the capacity advances required for 5G wireless systems. Since its theoretical conception six years ago, research activity has grown exponentially, and there is now a developing industrial interest to commercialise the technology. For this to happen effectively, we believe it is crucial that further pragmatic research is conducte… ▽ More Massive MIMO has rapidly gained popularity as a technology crucial to the capacity advances required for 5G wireless systems. Since its theoretical conception six years ago, research activity has grown exponentially, and there is now a developing industrial interest to commercialise the technology. For this to happen effectively, we believe it is crucial that further pragmatic research is conducted with a view to establish how reality differs from theoretical ideals. This paper presents an overview of the massive MIMO research activities occurring within the Communication Systems & Networks Group at the University of Bristol centred around our 128-antenna real-time testbed, which has been developed through the BIO programmable city initiative in collaboration with NI and Lund University. Through recent preliminary trials, we achieved a world first spectral efficiency of 79.4 bits/s/Hz, and subsequently demonstrated that this could be increased to 145.6 bits/s/Hz. We provide a summary of this work here along with some of our ongoing research directions such as large-scale array wave-front analysis, optimised power control and localisation techniques. △ Less

Submitted 21 May, 2017; originally announced May 2017.

Comments: Presented at the IET Radio Propagation and Technologies for 5G Conference (2016). 5 pages

Temporal Analysis of Measured LOS Massive MIMO Channels with Mobility

Authors: Paul Harris, Steffen Malkowsky, Joao Vieira, Fredrik Tufvesson, Wael Boukley Hasan, Liang Liu, Mark Beach, Simon Armour, Ove Edfors

Abstract: The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of o… ▽ More The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive MIMO deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the correlation of the MIMO channel vector over time is inspected for vehicles moving up to 29 km/h. For a 100 antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8 antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system. △ Less

Submitted 14 March, 2017; originally announced March 2017.

Comments: Accepted for presentation at the 85th IEEE Vehicular Technology Conference in Sydney. 5 Pages. arXiv admin note: substantial text overlap with arXiv:1701.08818

Performance Characterization of a Real-Time Massive MIMO System with LOS Mobile Channels

Authors: Paul Harris, Steffen Malkowsky, Joao Vieira, Fredrik Tufvesson Wael Boukley Hassan, Liang Liu, Mark Beach, Simon Armour, Ove Edfors

Abstract: The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel in… ▽ More The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive multiple-input, multiple-output (MIMO) deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the massive MIMO channel is sampled across many points in space to build a picture of the overall user orthogonality, and the impact of both azimuth and elevation array configurations are considered. Temporal analysis is also conducted for vehicles moving up to 29km/h and real-time bit error rates (BERs) for both the UL and DL without power control are presented. For a 100-antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8-antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system. △ Less

Submitted 19 May, 2017; v1 submitted 30 January, 2017; originally announced January 2017.

Comments: Submitted to the 2017 IEEE JSAC Special Issue on Deployment Issues and Performance Challenges for 5G, IEEE Journal on Selected Areas in Communications, 2017, vol.PP, no.99, pp.1-1

Performance of Spatial Modulation using Measured Real-World Channels

Authors: Abdelhamid Younis, William Thompson, Marco Di Renzo, Cheng-Xiang Wang, Mark A. Beach, Harald Haas, Peter M. Grant

Abstract: In this paper, for the first time real-world channel measurements are used to analyse the performance of spatial modulation (SM), where a full analysis of the average bit error rate performance (ABER) of SM using measured urban correlated and uncorrelated Rayleigh fading channels is provided. The channel measurements are taken from an outdoor urban multiple input multiple output (MIMO) measurement… ▽ More In this paper, for the first time real-world channel measurements are used to analyse the performance of spatial modulation (SM), where a full analysis of the average bit error rate performance (ABER) of SM using measured urban correlated and uncorrelated Rayleigh fading channels is provided. The channel measurements are taken from an outdoor urban multiple input multiple output (MIMO) measurement campaign. Moreover, ABER performance results using simulated Rayleigh fading channels are provided and compared with a derived analytical bound for the ABER of SM, and the ABER results for SM using the measured urban channels. The ABER results using the measured urban channels validate the derived analytical bound and the ABER results using the simulated channels. Finally, the ABER of SM is compared with the performance of spatial multiplexing (SMX) using the measured urban channels for small and large scale MIMO. It is shown that SM offers nearly the same or a slightly better performance than SMX for small scale MIMO. However, SM offers large reduction in ABER for large scale MIMO. △ Less

Submitted 15 May, 2013; originally announced May 2013.

Comments: IEEE Vehicular Technology Conference Fall 2013 (VTC-Fall 2013), Accepted

Practical Implementation of Spatial Modulation

Authors: N. Serafimovski, A. Younis, R. Mesleh, P. Chambers, M. Di Renzo, C. X. Wang, P. M. Grant, M. A. Beach, H. Haas

Abstract: In this work we seek to characterise the performance of spatial modulation (SM) and spatial multiplexing (SMX) with an experimental test bed. Two National Instruments (NI)-PXIe devices are used for the system testing, one for the transmitter and one for the receiver. The digital signal processing that formats the information data in preparation of transmission is described along with the digital s… ▽ More In this work we seek to characterise the performance of spatial modulation (SM) and spatial multiplexing (SMX) with an experimental test bed. Two National Instruments (NI)-PXIe devices are used for the system testing, one for the transmitter and one for the receiver. The digital signal processing that formats the information data in preparation of transmission is described along with the digital signal processing that recovers the information data. In addition, the hardware limitations of the system are also analysed. The average bit error ratio (ABER) of the system is validated through both theoretical analysis and simulation results for SM and SMX under line of sight (LoS) channel conditions. △ Less

Submitted 3 June, 2013; v1 submitted 3 May, 2013; originally announced May 2013.

Comments: IEEE Transactions on Vehicular Technology, accepted