-
On the robustness of Dirichlet-Neumann coupling schemes for fluid-structure-interaction problems with nearly-closed fluid domains
Authors:
A. Aissa-Berraies,
Ferdinando A. Auricchio,
Gertjan van Zwieten,
E. Harald van Brummelen
Abstract:
Partitioned methods for fluid-structure interaction (FSI) involve solving the structural and flow problems sequentially. These methods allow for separate settings for the fluid and solid subsystems and thus modularity, enabling reuse of advanced commercial and open-source software. Most partitioned FSI schemes apply a Dirichlet-Neumann (DN) split of the interface conditions. The DN scheme is adequ…
▽ More
Partitioned methods for fluid-structure interaction (FSI) involve solving the structural and flow problems sequentially. These methods allow for separate settings for the fluid and solid subsystems and thus modularity, enabling reuse of advanced commercial and open-source software. Most partitioned FSI schemes apply a Dirichlet-Neumann (DN) split of the interface conditions. The DN scheme is adequate in a wide range of applications, but it is sensitive to the added-mass effect, and it is susceptible to the incompressibility dilemma, i.e. it completely fails for FSI problems with an incompressible fluid furnished with Dirichlet boundary conditions on the part of its boundary complementary to the interface. In this paper, we show that if the fluid is incompressible and the fluid domain is nearly-closed, i.e. it carries Dirichlet conditions except for a permeable part of the boundary carrying a Robin condition, then the DN partitioned approach is sensitive to the flow resistance at the permeable part, and convergence of the partitioned approach deteriorates as the flow resistance increases. The DN scheme then becomes unstable in the limit as the flow resistance passes to infinity. Based on a simple model problem, we show that in the nearly-closed case, the convergence rate of the DN partitioned method depends on a so-called added-damping effect. The analysis gives insights that can aid to improve robustness and efficiency of partitioned method for FSI problems with contact, e.g. valve applications. In addition, the results elucidate the incompressibility dilemma as a limit of the added-damping effect passing to infinity, and the corresponding challenges related to FSI problems with nearly closed fluid-domain configurations. Via numerical experiments, we consider the generalization of the results of the simple model problem to more complex nearly-closed FSI problems.
△ Less
Submitted 4 June, 2025;
originally announced June 2025.
-
Data-informed uncertainty quantification for laser-based powder bed fusion additive manufacturing
Authors:
Mihaela Chiappetta,
Chiara Piazzola,
Lorenzo Tamellini,
Alessandro Reali,
Ferdinando Auricchio,
Massimo Carraturo
Abstract:
We present an efficient approach to quantify the uncertainties associated with the numerical simulations of the laser-based powder bed fusion of metals processes. Our study focuses on a thermomechanical model of an Inconel 625 cantilever beam, based on the AMBench2018-01 benchmark proposed by the National Institute of Standards and Technology (NIST). The proposed approach consists of a forward unc…
▽ More
We present an efficient approach to quantify the uncertainties associated with the numerical simulations of the laser-based powder bed fusion of metals processes. Our study focuses on a thermomechanical model of an Inconel 625 cantilever beam, based on the AMBench2018-01 benchmark proposed by the National Institute of Standards and Technology (NIST). The proposed approach consists of a forward uncertainty quantification analysis of the residual strains of the cantilever beam given the uncertainty in some of the parameters of the numerical simulation, namely the powder convection coefficient and the activation temperature. The uncertainty on such parameters is modelled by a data-informed probability density function obtained by a Bayesian inversion procedure, based on the displacement experimental data provided by NIST. To overcome the computational challenges of both the Bayesian inversion and the forward uncertainty quantification analysis we employ a multi-fidelity surrogate modelling technique, specifically the multi-index stochastic collocation method. The proposed approach allows us to achieve a 33\% reduction in the uncertainties on the prediction of residual strains compared with what we would get basing the forward UQ analysis on a-priori ranges for the uncertain parameters, and in particular the mode of the probability density function of such quantities (i.e., its ``most likely value'', roughly speaking) results to be in good agreement with the experimental data provided by NIST, even though only displacement data were used for the Bayesian inversion procedure.
△ Less
Submitted 20 March, 2024; v1 submitted 7 November, 2023;
originally announced November 2023.
-
On the accuracy of interpolation based on single-layer artificial neural networks with a focus on defeating the Runge phenomenon
Authors:
Ferdinando Auricchio,
Maria Roberta Belardo,
Gianluca Fabiani,
Francesco Calabrò,
Ariel F. Pascaner
Abstract:
In the present paper, we consider one-hidden layer ANNs with a feedforward architecture, also referred to as shallow or two-layer networks, so that the structure is determined by the number and types of neurons. The determination of the parameters that define the function, called training, is done via the resolution of the approximation problem, so by imposing the interpolation through a set of sp…
▽ More
In the present paper, we consider one-hidden layer ANNs with a feedforward architecture, also referred to as shallow or two-layer networks, so that the structure is determined by the number and types of neurons. The determination of the parameters that define the function, called training, is done via the resolution of the approximation problem, so by imposing the interpolation through a set of specific nodes. We present the case where the parameters are trained using a procedure that is referred to as Extreme Learning Machine (ELM) that leads to a linear interpolation problem. In such hypotheses, the existence of an ANN interpolating function is guaranteed. The focus is then on the accuracy of the interpolation outside of the given sampling interpolation nodes when they are the equispaced, the Chebychev, and the randomly selected ones. The study is motivated by the well-known bell-shaped Runge example, which makes it clear that the construction of a global interpolating polynomial is accurate only if trained on suitably chosen nodes, ad example the Chebychev ones. In order to evaluate the behavior when growing the number of interpolation nodes, we raise the number of neurons in our network and compare it with the interpolating polynomial. We test using Runge's function and other well-known examples with different regularities. As expected, the accuracy of the approximation with a global polynomial increases only if the Chebychev nodes are considered. Instead, the error for the ANN interpolating function always decays and in most cases we observe that the convergence follows what is observed in the polynomial case on Chebychev nodes, despite the set of nodes used for training.
△ Less
Submitted 7 May, 2024; v1 submitted 21 August, 2023;
originally announced August 2023.
-
Sparse-grids uncertainty quantification of part-scale additive manufacturing processes
Authors:
Mihaela Chiappetta,
Chiara Piazzola,
Massimo Carraturo,
Lorenzo Tamellini,
Alessandro Reali,
Ferdinando Auricchio
Abstract:
The present paper aims at applying uncertainty quantification methodologies to process simulations of powder bed fusion of metal. In particular, for a part-scale thermomechanical model of an Inconel 625 super-alloy beam, we study the uncertainties of three process parameters, namely the activation temperature, the powder convection coefficient and the gas convection coefficient. First, we perform…
▽ More
The present paper aims at applying uncertainty quantification methodologies to process simulations of powder bed fusion of metal. In particular, for a part-scale thermomechanical model of an Inconel 625 super-alloy beam, we study the uncertainties of three process parameters, namely the activation temperature, the powder convection coefficient and the gas convection coefficient. First, we perform a variance-based global sensitivity analysis to study how each uncertain parameter contributes to the variability of the beam displacements. The results allow us to conclude that the gas convection coefficient has little impact and can therefore be fixed to a constant value for subsequent studies. Then, we conduct an inverse uncertainty quantification analysis, based on a Bayesian approach on synthetic displacements data, to quantify the uncertainties of the two remaining parameters, namely the activation temperature and the powder convection coefficient. Finally, we use the results of the inverse uncertainty quantification analysis to perform a data-informed forward uncertainty quantification analysis of the residual strains. Crucially, we make use of surrogate models based on sparse grids to keep to a minimum the computational burden of every step of the uncertainty quantification analysis. The proposed uncertainty quantification workflow allows us to substantially ease the typical trial-and-error approach used to calibrate power bed fusion part-scale models, and to greatly reduce uncertainties on the numerical prediction of the residual strains. In particular, we demonstrate the possibility of using displacement measurements to obtain a data-informed probability density function of the residual strains, a quantity much more complex to measure than displacements.
△ Less
Submitted 19 April, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Bending behavior of additively manufactured lattice structures: numerical characterization and experimental validation
Authors:
Nina Korshunova,
Gianluca Alaimo,
Seyyed Bahram Hosseini,
Massimo Carraturo,
Alessandro Reali,
Jarkko Niiranen,
Ferdinando Auricchio,
Ernst Rank,
Stefan Kollmannsberger
Abstract:
Selective Laser Melting (SLM) technology has undergone significant development in the past years providing unique flexibility for the fabrication of complex metamaterials such as octet-truss lattices. However, the microstructure of the final parts can exhibit significant variations due to the high complexity of the manufacturing process. Consequently, the mechanical behavior of these lattices is s…
▽ More
Selective Laser Melting (SLM) technology has undergone significant development in the past years providing unique flexibility for the fabrication of complex metamaterials such as octet-truss lattices. However, the microstructure of the final parts can exhibit significant variations due to the high complexity of the manufacturing process. Consequently, the mechanical behavior of these lattices is strongly dependent on the process-induced defects, raising the importance on the incorporation of as-manufactured geometries into the computational structural analysis. This, in turn, challenges the traditional mesh-conforming methods making the computational costs prohibitively large. In the present work, an immersed image-to-analysis framework is applied to efficiently evaluate the bending behavior of AM lattices. To this end, we employ the Finite Cell Method (FCM) to perform a three-dimensional numerical analysis of the three-point bending test of a lattice structure and compare the as-designed to as-manufactured effective properties. Furthermore, we undertake a comprehensive study on the applicability of dimensionally reduced beam models to the prediction of the bending behavior of lattice beams and validate classical and strain gradient beam theories applied in combination with the FCM. The numerical findings suggest that the SLM octet-truss lattices exhibit size effects, thus, requiring a flexible framework to incorporate high-order continuum theories.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Image-based numerical characterization and experimental validation of tensile behavior of octet-truss lattice structures
Authors:
Nina Korshunova,
Gianluca Alaimo,
Seyyed Bahram Hosseini,
Massimo Carraturo,
Alessandro Reali,
Jarkko Niiranen,
Ferdinando Auricchio,
Ernst Rank,
Stefan Kollmannsberger
Abstract:
The production of lightweight metal lattice structures has received much attention due to the recent developments in additive manufacturing (AM). The design flexibility comes, however, with the complexity of the underlying physics. In fact, metal additive manufacturing introduces process-induced geometrical defects that mainly result in deviations of the effective geometry from the nominal one. Th…
▽ More
The production of lightweight metal lattice structures has received much attention due to the recent developments in additive manufacturing (AM). The design flexibility comes, however, with the complexity of the underlying physics. In fact, metal additive manufacturing introduces process-induced geometrical defects that mainly result in deviations of the effective geometry from the nominal one. This change in the final printed shape is the primary cause of the gap between the as-designed and as-manufactured mechanical behavior of AM products. Thus, the possibility to incorporate the precise manufactured geometries into the computational analysis is crucial for the quality and performance assessment of the final parts. Computed tomography (CT) is an accurate method for the acquisition of the manufactured shape. However, it is often not feasible to integrate the CT-based geometrical information into the traditional computational analysis due to the complexity of the meshing procedure for such high-resolution geometrical models and the prohibitive numerical costs. In this work, an embedded numerical framework is applied to efficiently simulate and compare the mechanical behavior of as-designed to as-manufactured octet-truss lattice structures. The parts are produced using laser powder bed fusion (LPBF). Employing an immersed boundary method, namely the Finite Cell Method (FCM), we perform direct numerical simulations (DNS) and first-order numerical homogenization analysis of a tensile test for a 3D printed octet-truss structure. Numerical results based on CT scan (as-manufactured geometry) show an excellent agreement with experimental measurements, whereas both DNS and first-order numerical homogenization performed directly on the 3D virtual model (as-designed geometry) of the structure show a significant deviation from experimental data.
△ Less
Submitted 11 March, 2021; v1 submitted 14 December, 2020;
originally announced December 2020.
-
Accurate prediction of melt pool shapes in laser powder bed fusion by the non-linear temperature equation including phase changes - isotropic versus anisotropic conductivity
Authors:
Stefan Kollmannsberger,
Massimo Carraturo,
Alessandro Reali,
Ferdinando Auricchio
Abstract:
In this contribution, we validate a physical model based on a transient temperature equation (including latent heat) w.r.t. the experimental set AMB2018-02 provided within the additive manufacturing benchmark series, established at the National Institute of Standards and Technology, USA. We aim at predicting the following quantities of interest: width, depth, and length of the melt pool by numeric…
▽ More
In this contribution, we validate a physical model based on a transient temperature equation (including latent heat) w.r.t. the experimental set AMB2018-02 provided within the additive manufacturing benchmark series, established at the National Institute of Standards and Technology, USA. We aim at predicting the following quantities of interest: width, depth, and length of the melt pool by numerical simulation and report also on the obtainable numerical results of the cooling rate. We first assume the laser to posses a double ellipsoidal shape and demonstrate that a well calibrated, purely thermal model based on isotropic thermal conductivity is able to predict all the quantities of interest, up to a deviation of maximum 7.3\% from the experimentally measured values.
However, it is interesting to observe that if we directly introduce, whenever available, the measured laser profile in the model (instead of the double ellipsoidal shape) the investigated model returns a deviation of 19.3\% from the experimental values. This motivates a model update by introducing anisotropic conductivity, which is intended to be a simplistic model for heat material convection inside the melt pool. Such an anisotropic model enables the prediction of all quantities of interest mentioned above with a maximum deviation from the experimental values of 6.5\%.
We note that, although more predictive, the anisotropic model induces only a marginal increase in computational complexity.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
A cost-effective isogeometric approach for composite plates based on a stress recovery procedure
Authors:
John-Eric Dufour,
Pablo Antolin,
Giancarlo Sangalli,
Ferdinando Auricchio,
Alessandro Reali
Abstract:
This paper introduces a cost-effective strategy to simulate the behavior of laminated plates by means of isogeometric 3D solid elements. Exploiting the high continuity of spline functions and their properties, a proper out-of-plane stress state is recovered from a coarse displacement solution using a post-processing step based on the enforcement of equilibrium in strong form. Appealing results are…
▽ More
This paper introduces a cost-effective strategy to simulate the behavior of laminated plates by means of isogeometric 3D solid elements. Exploiting the high continuity of spline functions and their properties, a proper out-of-plane stress state is recovered from a coarse displacement solution using a post-processing step based on the enforcement of equilibrium in strong form. Appealing results are obtained and the method is shown to be particularly Peffective on slender composite stacks with a large number of layers.
△ Less
Submitted 21 April, 2017;
originally announced April 2017.
