-
Skin Controlled Electronic and Neuromorphic Tattoos
Authors:
Dmitry Kireev,
Nandu Koripally,
Samuel Liu,
Gabriella Coloyan Fleming,
Philip Varkey,
Joseph Belle,
Sivasakthya Mohan,
Sang Sub Han,
Dong Xu,
Yeonwoong Jung,
Xiangfeng Duan,
Jean Anne C. Incorvia,
Deji Akinwande
Abstract:
Wearable human activity sensors developed in the past decade show a distinct trend of becoming thinner and more imperceptible while retaining their electrical qualities, with graphene e-tattoos, as the ultimate example. A persistent challenge in modern wearables, however, is signal degradation due to the distance between the sensor's recording site and the signal transmission medium. To address th…
▽ More
Wearable human activity sensors developed in the past decade show a distinct trend of becoming thinner and more imperceptible while retaining their electrical qualities, with graphene e-tattoos, as the ultimate example. A persistent challenge in modern wearables, however, is signal degradation due to the distance between the sensor's recording site and the signal transmission medium. To address this, we propose here to directly utilize human skin as a signal transmission medium as well as using low-cost gel electrodes for rapid probing of 2D transistor-based wearables. We demonstrate that the hypodermis layer of the skin can effectively serve as an electrolyte, enabling electrical potential application to semiconducting films made from graphene and other 2D materials placed on top of the skin. Graphene transistor tattoos, when biased through the body, exhibit high charge carrier mobility (up to 6500 2V-1s-1), with MoS2 and PtSe2 transistors showing mobilities up to 30 cm2V-1s-1 and 1 cm2V-1s-1, respectively. Finally, by introducing a layer of Nafion to the device structure, we observed neuromorphic functionality, transforming these e-tattoos into neuromorphic bioelectronic devices controlled through the skin itself. The neuromorphic bioelectronic tattoos have the potential for developing self-aware and stand-alone smart wearables, crucial for understanding and improving overall human performance.
△ Less
Submitted 7 October, 2024;
originally announced October 2024.
-
Cascaded Logic Gates Based on High-Performance Ambipolar Dual-Gate WSe2 Thin Film Transistors
Authors:
Xintong Li,
Peng Zhou,
Xuan Hu,
Ethan Rivers,
Kenji Watanabe,
Takashi Taniguchi,
Deji Akinwande,
Joseph S. Friedman,
Jean Anne C. Incorvia
Abstract:
Ambipolar dual-gate transistors based on two-dimensional (2D) materials, such as graphene, carbon nanotubes, black phosphorus, and certain transition metal dichalcogenides (TMDs), enable reconfigurable logic circuits with suppressed off-state current. These circuits achieve the same logical output as CMOS with fewer transistors and offer greater flexibility in design. The primary challenge lies in…
▽ More
Ambipolar dual-gate transistors based on two-dimensional (2D) materials, such as graphene, carbon nanotubes, black phosphorus, and certain transition metal dichalcogenides (TMDs), enable reconfigurable logic circuits with suppressed off-state current. These circuits achieve the same logical output as CMOS with fewer transistors and offer greater flexibility in design. The primary challenge lies in the cascadability and power consumption of these logic gates with static CMOS-like connections. In this article, high-performance ambipolar dual-gate transistors based on tungsten diselenide (WSe2) are fabricated. A high on-off ratio of 10^8 and 10^6, a low off-state current of 100 to 300 fA, a negligible hysteresis, and an ideal subthreshold swing of 62 and 63 mV/dec are measured in the p- and n-type transport, respectively. For the first time, we demonstrate cascadable and cascaded logic gates using ambipolar TMD transistors with minimal static power consumption, including inverters, XOR, NAND, NOR, and buffers made by cascaded inverters. A thorough study of both the control gate and polarity gate behavior is conducted, which has previously been lacking. The noise margin of the logic gates is measured and analyzed. The large noise margin enables the implementation of VT-drop circuits, a type of logic with reduced transistor number and simplified circuit design. Finally, the speed performance of the VT-drop and other circuits built by dual-gate devices are qualitatively analyzed. This work lays the foundation for future developments in the field of ambipolar dual-gate TMD transistors, showing their potential for low-power, high-speed and more flexible logic circuits.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Reduced Graphene Oxide Tattoo as Wearable Proximity Sensor
Authors:
Vaishakh Kedambaimoole,
Neelotpala Kumar,
Vijay Shirhatti,
Suresh Nuthalapati,
Saurabh Kumar,
Mangalore Manjunatha Nayak,
Prosenjit Sen,
Deji Akinwande,
Konandur Rajanna
Abstract:
The human body is punctuated with wide array of sensory systems that provide a high evolutionary advantage by facilitating formation of a detailed picture of the immediate surroundings. The sensors range across a wide spectrum, acquiring input from non-contact audio-visual means to contact based input via pressure and temperature. The ambit of sensing can be extended further by imparting the body…
▽ More
The human body is punctuated with wide array of sensory systems that provide a high evolutionary advantage by facilitating formation of a detailed picture of the immediate surroundings. The sensors range across a wide spectrum, acquiring input from non-contact audio-visual means to contact based input via pressure and temperature. The ambit of sensing can be extended further by imparting the body with increased non-contact sensing capability through the phenomenon of electrostatics. Here we present graphene-based tattoo sensor for proximity sensing, employing the principle of electrostatic gating. The sensor shows a remarkable change in resistance upon exposure to objects surrounded with static charge on them. Compared to prior work in this field, the sensor has demonstrated the highest recorded proximity detection range of 20 cm. It is ultra-thin, highly skin conformal and comes with a facile transfer process such that it can be tattooed on highly curvilinear rough substrates like the human skin, unlike other graphene-based proximity sensors reported before. Present work details the operation of wearable proximity sensor while exploring the effect of mounting body on the working mechanism. A possible role of the sensor as an alerting system against unwarranted contact with objects in public places especially during the current SARS-CoV-2 pandemic has also been explored in the form of an LED bracelet whose color is controlled by the proximity sensor attached to it.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
