-
Optimizing Resource Allocation to Mitigate the Risk of Disruptive Events in Homeland Security and Emergency Management
Authors:
Parastoo Akbari,
Cameron A. MacKenzie
Abstract:
Homeland security in the United States faces a daunting task due to the multiple threats and hazards that can occur. Natural disasters, human-caused incidents such as terrorist attacks, and technological failures can result in significant damage, fatalities, injuries, and economic losses. The increasing frequency and severity of disruptive events in the United States highlight the urgent need for…
▽ More
Homeland security in the United States faces a daunting task due to the multiple threats and hazards that can occur. Natural disasters, human-caused incidents such as terrorist attacks, and technological failures can result in significant damage, fatalities, injuries, and economic losses. The increasing frequency and severity of disruptive events in the United States highlight the urgent need for effectively allocating resources in homeland security and emergency preparedness. This article presents an optimization-based decision support model to help homeland security policymakers identify and select projects that best mitigate the risk of threats and hazards while satisfying a budget constraint. The model incorporates multiple hazards, probabilistic risk assessments, and multidimensional consequences and integrates historical data and publicly available sources to evaluate and select the most effective risk mitigation projects and optimize resource allocation across various disaster scenarios. We apply this model to the state of Iowa, considering 16 hazards, six types of consequences, and 52 mitigation projects. Our results demonstrate how different budget levels influence project selection, emphasizing cost-effective solutions that maximize risk reduction. Sensitivity analysis examines the robustness of project selection under varying effectiveness assumptions and consequence estimations. The findings offer critical insights for policymakers in homeland security and emergency management and provide a basis for more efficient resource allocation and improved disaster resilience.
△ Less
Submitted 3 April, 2025;
originally announced April 2025.
-
A value-focused thinking approach to measure community resilience
Authors:
Rohit Suresh,
Parastoo Akbari,
Cameron A MacKenzie
Abstract:
Community resilience refers to the ability to prepare for, absorb, recover from, and adapt to disruptive events, but specific definitions and measures for resilience can vary widely from researcher to researcher or from discipline to discipline. Community resilience is often measured using a set of indicators based on census, socioeconomic, and community organizational data, but these metrics and…
▽ More
Community resilience refers to the ability to prepare for, absorb, recover from, and adapt to disruptive events, but specific definitions and measures for resilience can vary widely from researcher to researcher or from discipline to discipline. Community resilience is often measured using a set of indicators based on census, socioeconomic, and community organizational data, but these metrics and measures for community resilience provide little guidance for policymakers to determine how best to increase the community resilience. This article proposes to measure community resilience based on value focused thinking. We propose an objectives hierarchy that begins with a community decision makers' fundamental objective for resilience. Six high level objectives for community resilience, including social resilience, economic resilience, infrastructure resilience, environmental resilience, availability of resources, and functionality of critical services, are broken down into measurable attributes that focus on specific outcomes that a decision maker would like to achieve if a disruption occurs. This new way of assessing resilience is applied to measure the resilience of an illustrative community to an improvised explosive device, a cyberattack, a tornado, a flood, and a winter storm. Keywords: Community Resilience, Resiliency, Risk Analysis
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
MechProNet: Machine Learning Prediction of Mechanical Properties in Metal Additive Manufacturing
Authors:
Parand Akbari,
Masoud Zamani,
Amir Mostafaei
Abstract:
Predicting mechanical properties in metal additive manufacturing (MAM) is essential for ensuring the performance and reliability of printed parts, as well as their suitability for specific applications. However, conducting experiments to estimate mechanical properties in MAM processes can be laborious and expensive, and they are often limited to specific materials and processes. Machine learning (…
▽ More
Predicting mechanical properties in metal additive manufacturing (MAM) is essential for ensuring the performance and reliability of printed parts, as well as their suitability for specific applications. However, conducting experiments to estimate mechanical properties in MAM processes can be laborious and expensive, and they are often limited to specific materials and processes. Machine learning (ML) methods offer a more flexible and cost-effective approach to predicting mechanical properties based on processing parameters and material properties. In this study, we introduce a comprehensive framework for benchmarking ML models for predicting mechanical properties. We compiled an extensive experimental dataset from over 90 MAM articles and data sheets from a diverse range of sources, encompassing 140 different MAM data sheets. This dataset includes information on MAM processing conditions, machines, materials, and resulting mechanical properties such as yield strength, ultimate tensile strength, elastic modulus, elongation, hardness, and surface roughness. Our framework incorporates physics-aware featurization specific to MAM, adjustable ML models, and tailored evaluation metrics to construct a comprehensive learning framework for predicting mechanical properties. Additionally, we explore the Explainable AI method, specifically SHAP analysis, to elucidate and interpret the predicted values of ML models for mechanical properties. Furthermore, data-driven explicit models were developed to estimate mechanical properties based on processing parameters and material properties, offering enhanced interpretability compared to conventional ML models.
△ Less
Submitted 17 March, 2024; v1 submitted 21 August, 2022;
originally announced September 2022.
-
Surrogate Modeling of Melt Pool Thermal Field using Deep Learning
Authors:
AmirPouya Hemmasian,
Francis Ogoke,
Parand Akbari,
Jonathan Malen,
Jack Beuth,
Amir Barati Farimani
Abstract:
Powder-based additive manufacturing has transformed the manufacturing industry over the last decade. In Laser Powder Bed Fusion, a specific part is built in an iterative manner in which two-dimensional cross-sections are formed on top of each other by melting and fusing the proper areas of the powder bed. In this process, the behavior of the melt pool and its thermal field has a very important rol…
▽ More
Powder-based additive manufacturing has transformed the manufacturing industry over the last decade. In Laser Powder Bed Fusion, a specific part is built in an iterative manner in which two-dimensional cross-sections are formed on top of each other by melting and fusing the proper areas of the powder bed. In this process, the behavior of the melt pool and its thermal field has a very important role in predicting the quality of the manufactured part and its possible defects. However, the simulation of such a complex phenomenon is usually very time-consuming and requires huge computational resources. Flow-3D is one of the software packages capable of executing such simulations using iterative numerical solvers. In this work, we create three datasets of single-trail processes using Flow-3D and use them to train a convolutional neural network capable of predicting the behavior of the three-dimensional thermal field of the melt pool solely by taking three parameters as input: laser power, laser velocity, and time step. The CNN achieves a relative Root Mean Squared Error of 2% to 3% for the temperature field and an average Intersection over Union score of 80% to 90% in predicting the melt pool area. Moreover, since time is included as one of the inputs of the model, the thermal field can be instantly obtained for any arbitrary time step without the need to iterate and compute all the steps
△ Less
Submitted 4 August, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
MeltpoolNet: Melt pool Characteristic Prediction in Metal Additive Manufacturing Using Machine Learning
Authors:
Parand Akbari,
Francis Ogoke,
Ning-Yu Kao,
Kazem Meidani,
Chun-Yu Yeh,
William Lee,
Amir Barati Farimani
Abstract:
Characterizing meltpool shape and geometry is essential in metal Additive Manufacturing (MAM) to control the printing process and avoid defects. Predicting meltpool flaws based on process parameters and powder material is difficult due to the complex nature of MAM process. Machine learning (ML) techniques can be useful in connecting process parameters to the type of flaws in the meltpool. In this…
▽ More
Characterizing meltpool shape and geometry is essential in metal Additive Manufacturing (MAM) to control the printing process and avoid defects. Predicting meltpool flaws based on process parameters and powder material is difficult due to the complex nature of MAM process. Machine learning (ML) techniques can be useful in connecting process parameters to the type of flaws in the meltpool. In this work, we introduced a comprehensive framework for benchmarking ML for melt pool characterization. An extensive experimental dataset has been collected from more than 80 MAM articles containing MAM processing conditions, materials, meltpool dimensions, meltpool modes and flaw types. We introduced physics-aware MAM featurization, versatile ML models, and evaluation metrics to create a comprehensive learning framework for meltpool defect and geometry prediction. This benchmark can serve as a basis for melt pool control and process optimization. In addition, data-driven explicit models have been identified to estimate meltpool geometry from process parameters and material properties which outperform Rosenthal estimation for meltpool geometry while maintaining interpretability.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Deep Active Contours Using Locally Controlled Distance Vector Flow
Authors:
Parastoo Akbari,
Atefeh Ziaei,
Hamed Azarnoush
Abstract:
Active contours Model (ACM) has been extensively used in computer vision and image processing. In recent studies, Convolutional Neural Networks (CNNs) have been combined with active contours replacing the user in the process of contour evolution and image segmentation to eliminate limitations associated with ACM's dependence on parameters of the energy functional and initialization. However, prior…
▽ More
Active contours Model (ACM) has been extensively used in computer vision and image processing. In recent studies, Convolutional Neural Networks (CNNs) have been combined with active contours replacing the user in the process of contour evolution and image segmentation to eliminate limitations associated with ACM's dependence on parameters of the energy functional and initialization. However, prior works did not aim for automatic initialization which is addressed here. In addition to manual initialization, current methods are highly sensitive to initial location and fail to delineate borders accurately. We propose a fully automatic image segmentation method to address problems of manual initialization, insufficient capture range, and poor convergence to boundaries, in addition to the problem of assignment of energy functional parameters. We train two CNNs, which predict active contour weighting parameters and generate a ground truth mask to extract Distance Transform (DT) and an initialization circle. Distance transform is used to form a vector field pointing from each pixel of the image towards the closest point on the boundary, the size of which is equal to the Euclidean distance map. We evaluate our method on four publicly available datasets including two building instance segmentation datasets, Vaihingen and Bing huts, and two mammography image datasets, INBreast and DDSM-BCRP. Our approach outperforms latest research by 0.59 ans 2.39 percent in mean Intersection-over-Union (mIoU), 7.38 and 8.62 percent in Boundary F-score (BoundF) for Vaihingen and Bing huts datasets, respectively. Dice similarity coefficient for the INBreast and DDSM-BCRP datasets is 94.23% and 90.89%, respectively indicating our method is comparable to state-of-the-art frameworks.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
