Showing 1–8 of 8 results for author: Abali, B E

Deposition Rates in Thermal Laser Epitaxy: Simulation and Experiment

Authors: Thomas J. Smart, Bilen Emek Abali, Hans Boschker, Wolfgang Braun

Abstract: The modeling of deposition rates in Thermal Laser Epitaxy (TLE) is essential for the accurate prediction of the evaporation process and for improved dynamic process control. We demonstrate excellent agreement between experimental data and a model based on a finite element simulation that describes the temperature distribution of an elemental source when irradiated with continuous wave laser radiat… ▽ More The modeling of deposition rates in Thermal Laser Epitaxy (TLE) is essential for the accurate prediction of the evaporation process and for improved dynamic process control. We demonstrate excellent agreement between experimental data and a model based on a finite element simulation that describes the temperature distribution of an elemental source when irradiated with continuous wave laser radiation. The simulation strongly depends on the thermophysical constants of the material, data of which is lacking for many elements. Effective values for the parameters may be determined with precision by means of an unambiguous reference provided by the melting point of the material, which is directly observed during the experiments. TLE may therefore be used to study the high temperature thermophysical and optical properties of the elements. △ Less

Submitted 3 January, 2025; originally announced January 2025.

A comparative analysis for different finite element types in strain-gradient elasticity simulations performed on Firedrake and FEniCS

Authors: B. Cagri Sarar, M. Erden Yildizdag, Francesco Fabbrocino, B. Emek Abali

Abstract: The layer-upon-layer approach in additive manufacturing, open or closed cells in polymeric or metallic foams involve an intrinsic microstructure tailored to the underlying applications. Homogenization of such architectured materials creates metamaterials modeled by higher-gradient models, specifically when the microstructure's characteristic length is comparable to the length scale of the structur… ▽ More The layer-upon-layer approach in additive manufacturing, open or closed cells in polymeric or metallic foams involve an intrinsic microstructure tailored to the underlying applications. Homogenization of such architectured materials creates metamaterials modeled by higher-gradient models, specifically when the microstructure's characteristic length is comparable to the length scale of the structure. In this study, we conduct a comparative analysis of various finite elements methods for solving problems in strain-gradient elasticity. We employ open-source packages from Firedrake and FEniCS. Different finite element formulations are tested: we implement Lagrange, Argyris, Hermite elements, a Hu--Washizu type (mixed) formulation, as well as isogeometric analysis with Non-Uniform Rational B-Splines (NURBS). For the numerical study, we investigate one- and two-dimensional problems discussed in the literature of strain-gradient modeling. All developed codes are open-access to encourage research in Finite Element Method (FEM) based computation of generalized continua. △ Less

Submitted 16 June, 2025; v1 submitted 18 November, 2024; originally announced November 2024.

Determining parameters in generalized thermomechanics for metamaterials by means of asymptotic homogenization

Authors: Bozo Vazic, Bilen Emek Abali, Pania Newell

Abstract: Advancement in manufacturing methods enable designing so called metamaterials with a tailor-made microstructure. Microstructure affects materials response within a length-scale, where we model this behavior by using the generalized thermomechanics. Strain gradient theory is employed as a higher-order theory with thermodynamics modeled as a first-order theory. Developing multiphysics models for het… ▽ More Advancement in manufacturing methods enable designing so called metamaterials with a tailor-made microstructure. Microstructure affects materials response within a length-scale, where we model this behavior by using the generalized thermomechanics. Strain gradient theory is employed as a higher-order theory with thermodynamics modeled as a first-order theory. Developing multiphysics models for heterogeneous materials is indeed a challenge and even this ``simplest'' model in generalized thermomechanics causes dozens of parameters to be determined. We develop a computational model by using a given microstructure, modeled as a periodic domain, and numerically calculate all parameters by means of asymptotic homogenization. Finite element method (FEM) is employed with the aid of open-source codes (FEniCS). Some example with symmetric and random distribution of voids in a model problem verifies the method and provides an example at which length-scale we need to consider generalized thermoeleasticity in composite materials. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Verification of asymptotic homogenization method developed for periodic architected materials in strain gradient continuum

Authors: Hua Yang, Bilen Emek Abali, Wolfgang H. Müller, Salma Barboura, Jia Li

Abstract: Strain gradient theory is an accurate model for capturing the size effect and localization phenomena. However, the challenge in identification of corresponding constitutive parameters limits the practical application of the theory. We present and utilize asymptotic homogenization herein. All parameters in rank four, five, and six tensors are determined with the demonstrated computational approach.… ▽ More Strain gradient theory is an accurate model for capturing the size effect and localization phenomena. However, the challenge in identification of corresponding constitutive parameters limits the practical application of the theory. We present and utilize asymptotic homogenization herein. All parameters in rank four, five, and six tensors are determined with the demonstrated computational approach. Examples for epoxy carbon fiber composite, metal matrix composite, and aluminum foam illustrate the effectiveness and versatility of the proposed method. The influences of volume fraction of matrix, the stack of RVEs, and the varying unit cell lengths on the identified parameters are investigated. The homogenization computational tool is applicable to a wide class materials and makes use of open-source codes in FEniCS. We make all of the codes publicly available in order to encourage a transparent scientific exchange. △ Less

Submitted 18 December, 2021; v1 submitted 9 June, 2021; originally announced June 2021.

Additive manufacturing introduced substructure and computational determination of metamaterials parameters by means of the asymptotic homogenization

Authors: Bilen Emek Abali, Emilio Barchiesi

Abstract: Metamaterials exhibit materials response deviation from conventional elasticity. This phenomenon is captured by the generalized elasticity as a result of extending the theory at the expense of introducing additional parameters. These parameters are linked to internal length scales. Describing on a macroscopic level a material possessing a substructure at a microscopic length scale calls for introd… ▽ More Metamaterials exhibit materials response deviation from conventional elasticity. This phenomenon is captured by the generalized elasticity as a result of extending the theory at the expense of introducing additional parameters. These parameters are linked to internal length scales. Describing on a macroscopic level a material possessing a substructure at a microscopic length scale calls for introducing additional constitutive parameters. Therefore, in principle, an asymptotic homogenization is feasible to determine these parameters given an accurate knowledge on the substructure. Especially in additive manufacturing, known under the infill ratio, topology optimization introduces a substructure leading to higher order terms in mechanical response. Hence, weight reduction creates a metamaterial with an accurately known substructure. Herein, we develop a computational scheme using both scales for numerically identifying metamaterials parameters. As a specific example we apply it on a honeycomb substructure and discuss the infill ratio. Such a computational approach is applicable to a wide class substructures and makes use of open-source codes; we make it publicly available for a transparent scientific exchange. △ Less

Submitted 14 October, 2020; v1 submitted 26 September, 2020; originally announced September 2020.

Determination of Metamaterial Parameters by Means of a Homogenization Approach Based on Asymptotic Analysis

Authors: H. Yang, B. E. Abali, W. H. Müller, D. Timofeev

Abstract: Owing to additive manufacturing techniques, a structure at millimeter length scale (macroscale) can be produced by using a lattice substructure at micrometer length scale (microscale). Such a system is called a metamaterial at the macroscale as the mechanical characteristics deviate from the characteristics at the microscale. As a remedy, metamaterial is modeled by using additional parameters; we… ▽ More Owing to additive manufacturing techniques, a structure at millimeter length scale (macroscale) can be produced by using a lattice substructure at micrometer length scale (microscale). Such a system is called a metamaterial at the macroscale as the mechanical characteristics deviate from the characteristics at the microscale. As a remedy, metamaterial is modeled by using additional parameters; we intend to determine them. A homogenization approach based on the asymptotic analysis establishes a connection between these different characteristics at micro- and macroscales. A linear elastic first order theory at the microscale is related to a linear elastic second order theory at the macroscale. Relation for parameters at the macroscale is derived by using the equivalence of energy at macro- and microscales within a so-called Representative Volume Element (RVE). Determination of parameters are succeeded by solving a boundary value problem with the Finite Element Method (FEM). The proposed approach guarantees that the additional parameters vanish if the material is purely homogeneous, in other words, it is fully compatible with conventional homogenization schemes based on spatial averaging techniques. Moreover, the proposed approach is reliable as it ensures that such resolved additional parameters are not sensitive to choices of RVE consisting in the repetition of smaller RVEs but depend upon the intrinsic size of the structure. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Theory and computation of electromagnetic fields and thermomechanical structure interaction for systems undergoing large deformations

Authors: B. E. Abali, A. F. Queiruga

Abstract: For an accurate description of electromagneto-thermomechanical systems, electromagnetic fields need to be described in a Eulerian frame, whereby the thermomechanics is solved in a Lagrangean frame. It is possible to map the Eulerian frame to the current placement of the matter and the Lagrangean frame to a reference placement. We present a rigorous and thermodynamically consistent derivation of go… ▽ More For an accurate description of electromagneto-thermomechanical systems, electromagnetic fields need to be described in a Eulerian frame, whereby the thermomechanics is solved in a Lagrangean frame. It is possible to map the Eulerian frame to the current placement of the matter and the Lagrangean frame to a reference placement. We present a rigorous and thermodynamically consistent derivation of governing equations for fully coupled electromagneto-thermomechanical systems properly handling finite deformations. A clear separation of the different frames is necessary. There are various attempts to formulate electromagnetism in the Lagrangean frame, or even to compute all fields in the current placement. Both formulations are challenging and heavily discussed in the literature. In this work, we propose another solution scheme that exploits the capabilities of advanced computational tools. Instead of amending the formulation, we can solve thermomechanics in the Lagrangean frame and electromagnetism in the Eulerian frame and manage the interaction between the fields. The approach is similar to its analog in fluid structure interaction, but more challenging because the field equations in electromagnetism must also be solved within the solid body while following their own different set of transformation rules. We additionally present a mesh-morphing algorithm necessary to accommodate finite deformations to solve the electromagnetic fields outside of the material body. We illustrate the use of the new formulation by developing an open-source implementation using the FEniCS package and applying this implementation to several engineering problems in electromagnetic structure interaction undergoing large deformations. △ Less

Submitted 4 June, 2019; v1 submitted 28 March, 2018; originally announced March 2018.

An accurate finite element method for the numerical solution of isothermal and incompressible flow of viscous fluid

Authors: Bilen Emek Abali

Abstract: Despite its numerical challenges, finite element method is used to compute viscous fluid flow. A consensus on the cause of numerical problems has been reached; however, general algorithms---allowing a robust and accurate simulation for any process---are still missing. Either a very high computational cost is necessary for a direct numerical solution (DNS) or some limiting procedure is used by addi… ▽ More Despite its numerical challenges, finite element method is used to compute viscous fluid flow. A consensus on the cause of numerical problems has been reached; however, general algorithms---allowing a robust and accurate simulation for any process---are still missing. Either a very high computational cost is necessary for a direct numerical solution (DNS) or some limiting procedure is used by adding artificial dissipation to the system. These stabilization methods are useful; however, they are often applied relative to the element size such that a local monotonous convergence is challenging to acquire. We need a computational strategy for solving viscous fluid flow using solely the balance equations. In this work, we present a general procedure solving fluid mechanics problems without use of any stabilization or splitting schemes. Hence, its generalization to multiphysics applications is straightforward. We discuss emerging numerical problems and present the methodology rigorously. Implementation is achieved by using open-source packages and the accuracy as well as the robustness is demonstrated by comparing results to the closed-form solutions and also by solving well-known benchmarking problems. △ Less

Submitted 8 December, 2018; v1 submitted 4 September, 2017; originally announced September 2017.