Showing 1–44 of 44 results for author: de Castro, P

Role of Translational Noise in Motility-Induced Phase Separation of Hard Active Particles

Authors: Felipe Hawthorne, Pablo de Castro, José A. Freire

Abstract: Self-propelled particles, like motile cells and artificial colloids, can spontaneously form macroscopic clusters. This phenomenon is called motility-induced phase separation (MIPS) and occurs even without attractive forces, provided that the self-propulsion direction fluctuates slowly. In addition to rotational noise, these particles may experience translational noise, not coupled to rotational no… ▽ More Self-propelled particles, like motile cells and artificial colloids, can spontaneously form macroscopic clusters. This phenomenon is called motility-induced phase separation (MIPS) and occurs even without attractive forces, provided that the self-propulsion direction fluctuates slowly. In addition to rotational noise, these particles may experience translational noise, not coupled to rotational noise, due to environmental fluctuations. We study the role of translational noise in the clustering of active Brownian hard disks. To tease apart the contribution of translational noise, we model excluded-volume interactions through a Monte-Carlo-like overlap rejection approach. Upon increasing the translational diffusivity, we find that clusters become more rounded (less fractal), eventually transitioning to genuine MIPS. For sufficiently higher translational diffusivity, clusters melt down. We develop a theory for the cluster mass distribution, and employ a hydrodynamic approach with parameters taken from the simulation, that explains the clustering phase diagram. △ Less

Submitted 22 May, 2025; originally announced May 2025.

Critical habitat size of organisms diffusing with stochastic resetting

Authors: Luiz Menon, Pablo de Castro, Celia Anteneodo

Abstract: The persistence of populations depends on the minimum habitat area required for survival, known as the critical patch size. While most studies assume purely diffusive movement, additional movement components can significantly alter habitat requirements. Here, we investigate how critical patch sizes are affected by stochastic resetting, where each organism intermittently returns to a common fixed l… ▽ More The persistence of populations depends on the minimum habitat area required for survival, known as the critical patch size. While most studies assume purely diffusive movement, additional movement components can significantly alter habitat requirements. Here, we investigate how critical patch sizes are affected by stochastic resetting, where each organism intermittently returns to a common fixed location, modeling behaviors such as homing, refuge-seeking, or movement toward essential resources. We analytically derive the total population growth over time and the critical patch size. Our results are validated by agent-based simulations, showing excellent agreement. Our findings demonstrate that stochastic resetting can either increase or decrease the critical patch size, depending on the reset rate, reset position, and external environmental hostility. These results highlight how intermittent relocation shapes ecological thresholds and may provide insights for ecological modeling and conservation planning, particularly in fragmented landscapes such as in deforested regions. △ Less

Submitted 6 May, 2025; originally announced May 2025.

MSC Class: 92D25; 82C31

Higher-order Skin Effect through a Hermitian-non-Hermitian Correspondence and Its Observation in an Acoustic Kagome Lattice

Authors: Jia-Xin Zhong, Pedro Fittipaldi de Castro, Tianhong Lu, Jeewoo Kim, Mourad Oudich, Jun Ji, Li Shi, Kai Chen, Jing Lu, Yun Jing, Wladimir A. Benalcazar

Abstract: The non-Hermitian skin effect (NHSE) is a distinctive topological phenomenon observed in nonHermitian systems. Recently, there has been considerable interest in exploring higher-order NHSE occurrences in two and three dimensions. In such systems, topological edge states collapse into a corner while bulk states remain delocalized. Through a Hermitian-non-Hermitian correspondence, this study predict… ▽ More The non-Hermitian skin effect (NHSE) is a distinctive topological phenomenon observed in nonHermitian systems. Recently, there has been considerable interest in exploring higher-order NHSE occurrences in two and three dimensions. In such systems, topological edge states collapse into a corner while bulk states remain delocalized. Through a Hermitian-non-Hermitian correspondence, this study predicts and experimentally observes the higher-order NHSE in an acoustic Kagome lattice possessing nonreciprocal hoppings. By rotating the frequency spectrum and employing complexfrequency excitation techniques, we observe the localization of acoustic energy towards a corner of the lattice in the topologically nontrivial phase, even when the source is located far from that corner. In contrast, the acoustic energy spreads out when excited at the frequencies hosting the bulk states. These observations are unequivocal evidence of the higher-order NHSE. △ Less

Submitted 6 September, 2024; v1 submitted 2 September, 2024; originally announced September 2024.

Journal ref: Phys. Rev. B 111, 014314 (2025)

Effects of kinetic energy on heat fluctuations of passive and active overdamped driven particles

Authors: Pedro V. Paraguassú, Rui Aquino, Pablo de Castro

Abstract: To describe the spatial trajectory of an overdamped Brownian particle, inertial effects can be neglected. Yet, at the energetic level of stochastic thermodynamics, changes in kinetic energy must be considered to accurately predict the heat exchanged with the thermal bath. On the other hand, in the presence of external driving forces, one would expect the effects of kinetic energy fluctuations to b… ▽ More To describe the spatial trajectory of an overdamped Brownian particle, inertial effects can be neglected. Yet, at the energetic level of stochastic thermodynamics, changes in kinetic energy must be considered to accurately predict the heat exchanged with the thermal bath. On the other hand, in the presence of external driving forces, one would expect the effects of kinetic energy fluctuations to be reduced, as thermal noise becomes comparatively less relevant. Here, we investigate the competition between the kinetic energy and the external work contributions to the heat statistics of passive and active overdamped Brownian particles subject to external driving forces. We find that kinetic energy effects cause fluctuations in the exchanged heat to become non-Gaussian. To evaluate the relevance of these effects, we compute the excess kurtosis and the Pearson correlation. For fixed parameter values adapted from experiments, we identify a crossover transition from a regime in which the stochastic heat of overdamped particles is dominated by external work, where kinetic energy changes can be safely ignored, to a regime dominated by kinetic energy effects. Our results also provide a quantitative analytical way to assess how deep into a particular regime the system is. △ Less

Submitted 28 August, 2024; originally announced August 2024.

Comments: 13 pages, 4 figures

Solitons with Self-induced Topological Nonreciprocity

Authors: Pedro Fittipaldi de Castro, Wladimir Alejandro Benalcazar

Abstract: The nonlinear Schrodinger equation supports solitons -- self-interacting, localized states that behave as nearly independent objects. We exhibit solitons with self-induced nonreciprocal dynamics in a discrete nonlinear Schrodinger equation. This nonreciprocal behavior, dependent on soliton power, arises from the interplay between linear and nonlinear terms in the equations of motion. Initially sta… ▽ More The nonlinear Schrodinger equation supports solitons -- self-interacting, localized states that behave as nearly independent objects. We exhibit solitons with self-induced nonreciprocal dynamics in a discrete nonlinear Schrodinger equation. This nonreciprocal behavior, dependent on soliton power, arises from the interplay between linear and nonlinear terms in the equations of motion. Initially stable at high power, solitons exhibit nonreciprocal instabilities as power decreases, leading to unidirectional acceleration and amplification. This behavior is topologically protected by winding numbers on the solitons' mean-field Hamiltonian and their stability matrix, linking nonlinear dynamics and point gap topology in non-Hermitian Hamiltonians. △ Less

Submitted 12 July, 2024; v1 submitted 23 May, 2024; originally announced May 2024.

Comments: 6 pages, 3 figures

Restoring the fluctuation-dissipation theorem in Kardar-Parisi-Zhang universality class through a new emergent fractal dimension

Authors: Márcio S. Gomes-Filho, Pablo de Castro, Danilo B. Liarte, Fernando A. Oliveira

Abstract: The Kardar-Parisi-Zhang (KPZ) equation describes a wide range of growth-like phenomena, with applications in physics, chemistry and biology. There are three central questions in the study of KPZ growth: the determination of height probability distributions; the search for ever more precise universal growth exponents; and the apparent absence of a fluctuation-dissipation theorem (FDT) for spatial d… ▽ More The Kardar-Parisi-Zhang (KPZ) equation describes a wide range of growth-like phenomena, with applications in physics, chemistry and biology. There are three central questions in the study of KPZ growth: the determination of height probability distributions; the search for ever more precise universal growth exponents; and the apparent absence of a fluctuation-dissipation theorem (FDT) for spatial dimension $d>1$. Notably, these questions were answered exactly only for $1+1$ dimensions. In this work, we propose a new FDT valid for the KPZ problem in $d+1$ dimensions. This is done by rearranging terms and identifying a new correlated noise which we argue to be characterized by a fractal dimension $d_n$. We present relations between the KPZ exponents and two emergent fractal dimensions, namely $d_f$, of the rough interface, and $d_n$. Also, we simulate KPZ growth to obtain values for transient versions of the roughness exponent $α$, the surface fractal dimension $d_f$ and, through our relations, the noise fractal dimension $d_n$. Our results indicate that KPZ may have at least two fractal dimensions and that, within this proposal, a FDT is restored. Finally, we provide new insights into the old question about the upper critical dimension of the KPZ universality class. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Comments: 8 pages, 4 figures

Journal ref: Entropy 2024, 26(3), 260

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange

Authors: Matthew L. Evans, Johan Bergsma, Andrius Merkys, Casper W. Andersen, Oskar B. Andersson, Daniel Beltrán, Evgeny Blokhin, Tara M. Boland, Rubén Castañeda Balderas, Kamal Choudhary, Alberto Díaz Díaz, Rodrigo Domínguez García, Hagen Eckert, Kristjan Eimre, María Elena Fuentes Montero, Adam M. Krajewski, Jens Jørgen Mortensen, José Manuel Nápoles Duarte, Jacob Pietryga, Ji Qi, Felipe de Jesús Trejo Carrillo, Antanas Vaitkus, Jusong Yu, Adam Zettel, Pedro Baptista de Castro , et al. (34 additional authors not shown)

Abstract: The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea… ▽ More The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development. △ Less

Submitted 5 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Journal ref: Digital Discovery, 2024, 3, 1509-1533

Experimental exploration of ErB$_2$ and SHAP analysis on a machine-learned model of magnetocaloric materials for materials design

Authors: Kensei Terashima, Pedro Baptista de Castro, Akiko T Saito, Takafumi D Yamamoto, Ryo Matsumoto, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Stimulated by a recent report of a giant magnetocaloric effect in HoB$_2$ found via machine-learning predictions, we have explored the magnetocaloric properties of a related compound ErB$_2$, that has remained the last ferromagnetic material among the rare-earth diboride (REB$_2$) family with unreported magnetic entropy change |ΔSM|. The evaluated $|ΔS_M|$ at field change of 5 T in ErB$_2$ turned… ▽ More Stimulated by a recent report of a giant magnetocaloric effect in HoB$_2$ found via machine-learning predictions, we have explored the magnetocaloric properties of a related compound ErB$_2$, that has remained the last ferromagnetic material among the rare-earth diboride (REB$_2$) family with unreported magnetic entropy change |ΔSM|. The evaluated $|ΔS_M|$ at field change of 5 T in ErB$_2$ turned out to be as high as 26.1 (J kg$^{-1}$ K$^{-1}$) around the ferromagnetic transition (${T_C}$) of 14 K. In this series, HoB$_2$ is found to be the material with the largest $|ΔS_M|$ as the model predicted, while the predicted values showed a deviation with a systematic error compared to the experimental values. Through a coalition analysis using SHAP, we explore how this rare-earth dependence and the deviation in the prediction are deduced in the model. We further discuss how SHAP analysis can be useful in clarifying favorable combinations of constituent atoms through the machine-learned model with compositional descriptors. This analysis helps us to perform materials design with aid of machine learning of materials data. △ Less

Submitted 26 June, 2023; originally announced June 2023.

Comments: 9 pages, 10 figures. Accepted manuscript. Published by Taylor & Francis in STAM:Methods, available at https://doi.org/10.1080/27660400.2023.2217474

Journal ref: Science and Technology of Advanced Materials: Methods 3:1, 2217474 (2023)

Sequential epidemic spread between agglomerates of self-propelled agents in one dimension

Authors: Pablo de Castro, Felipe Urbina, Ariel Norambuena, Francisca Guzmán-Lastra

Abstract: Motile organisms can form stable agglomerates such as cities or colonies. In the outbreak of a highly contagious disease, the control of large-scale epidemic spread depends on factors like the number and size of agglomerates, travel rate between them, and disease recovery rate. While the emergence of agglomerates permits early interventions, it also explains longer real epidemics. In this work, we… ▽ More Motile organisms can form stable agglomerates such as cities or colonies. In the outbreak of a highly contagious disease, the control of large-scale epidemic spread depends on factors like the number and size of agglomerates, travel rate between them, and disease recovery rate. While the emergence of agglomerates permits early interventions, it also explains longer real epidemics. In this work, we study the spread of susceptible-infected-recovered epidemics in one-dimensional spatially-structured systems. By working in one dimension, we mimic microorganisms in narrow channels and establish a necessary foundation for future investigation in higher dimensions. We employ a model of self-propelled particles which spontaneously form multiple clusters. As the rate of stochastic reorientation decreases, clusters become larger and less numerous. Besides examining the time evolution averaged over many epidemics, we show how the final number of ever-infected individuals depends non-trivially on single-individual parameters. In particular, the number of ever-infected individuals first increases with the reorientation rate since particles escape sooner from clusters and spread the disease. For higher reorientation rate, travel between clusters becomes too diffusive and the clusters too small, decreasing the number of ever-infected individuals. △ Less

Submitted 30 March, 2023; originally announced March 2023.

Comments: 11 pages, 6 figures

Wetting dynamics by mixtures of fast and slow self-propelled particles

Authors: Mauricio Rojas-Vega, Pablo de Castro, Rodrigo Soto

Abstract: We study active surface wetting using a minimal model of bacteria that takes into account the intrinsic motility diversity of living matter. A mixture of "fast" and "slow" self-propelled Brownian particles is considered in the presence of a wall. The evolution of the wetting layer thickness shows an overshoot before stationarity and its composition evolves in two stages, equilibrating after a slow… ▽ More We study active surface wetting using a minimal model of bacteria that takes into account the intrinsic motility diversity of living matter. A mixture of "fast" and "slow" self-propelled Brownian particles is considered in the presence of a wall. The evolution of the wetting layer thickness shows an overshoot before stationarity and its composition evolves in two stages, equilibrating after a slow elimination of excess particles. Non-monotonic evolutions are shown to arise from delayed avalanches towards the dilute phase combined with the emergence of a transient particle front. △ Less

Submitted 4 January, 2023; originally announced January 2023.

Comments: 7 pages, 6 figures

Automatic extraction of materials and properties from superconductors scientific literature

Authors: Luca Foppiano, Pedro Baptista de Castro, Pedro Ortiz Suarez, Kensei Terashima, Yoshihiko Takano, Masashi Ishii

Abstract: The automatic extraction of materials and related properties from the scientific literature is gaining attention in data-driven materials science (Materials Informatics). In this paper, we discuss Grobid-superconductors, our solution for automatically extracting superconductor material names and respective properties from text. Built as a Grobid module, it combines machine learning and heuristic a… ▽ More The automatic extraction of materials and related properties from the scientific literature is gaining attention in data-driven materials science (Materials Informatics). In this paper, we discuss Grobid-superconductors, our solution for automatically extracting superconductor material names and respective properties from text. Built as a Grobid module, it combines machine learning and heuristic approaches in a multi-step architecture that supports input data as raw text or PDF documents. Using Grobid-superconductors, we built SuperCon2, a database of 40324 materials and properties records from 37700 papers. The material (or sample) information is represented by name, chemical formula, and material class, and is characterized by shape, doping, substitution variables for components, and substrate as adjoined information. The properties include the Tc superconducting critical temperature and, when available, applied pressure with the Tc measurement method. △ Less

Submitted 22 November, 2022; v1 submitted 25 October, 2022; originally announced October 2022.

Comments: 20 pages, 11 figures, 8 tables

Journal ref: STAM:M, 2023, VOL. 3, NO. 1, 2153633

Magnetic, thermal, and magnetocaloric properties of the holmium trialuminide HoAl$_{3}$ with polytypic phases

Authors: Takafumi D. Yamamoto, Pedro Baptista de Castro, Kensei Terashima, Akiko T. Saito, Hiroyuki Takeya, Yoshihiko Takano

Abstract: We investigate the magnetic, thermal, and magnetocaloric properties of the intermetallic HoAl$_{3}$ compounds with two different crystal structures. The room-temperature equilibrium trigonal phase HoAl$_{3}$ undergoes an antiferromagnetic (AFM) transition at the Neel temperature $T^{\rm tri}_{\rm N} =$ 9.8 K. The AFM ordering of the compound is strong against the magnetic field, so that inverse ma… ▽ More We investigate the magnetic, thermal, and magnetocaloric properties of the intermetallic HoAl$_{3}$ compounds with two different crystal structures. The room-temperature equilibrium trigonal phase HoAl$_{3}$ undergoes an antiferromagnetic (AFM) transition at the Neel temperature $T^{\rm tri}_{\rm N} =$ 9.8 K. The AFM ordering of the compound is strong against the magnetic field, so that inverse magnetocaloric effect (MCE) is found even under a magnetic field change of 0-50 kOe. The high-pressure cubic phase HoAl3, prepared by a rapid-solidification process, is antiferromagnetically ordered below $T^{\rm cub}_{\rm N} =$ 15 K. Magnetic and specific heat measurements reveal that this long-range AFM state becomes unstable as the temperature drops and then it is replaced by a magnetic glassy state below a spin freezing temperature $T_{\rm f} =$ 11 K. The successive changes in magnetic state result in complicated temperature and field dependence of the MCE at low temperatures. △ Less

Submitted 8 August, 2022; originally announced August 2022.

Comments: Journal of Magnetism and Magnetic Materials Accepted

Journal ref: J. Magn. Magn. Mater. 562 (2022) 169801

Neural networks for a quick access to a digital twin of scanning physical properties measurements

Authors: Kensei Terashima, Pedro Baptista de Castro, Miren Garbiñe Esparza Echevarria, Ryo Matsumoto, Takafumi D Yamamoto, Akiko T Saito, Hiroyuki Takeya, Yoshihiko Takano

Abstract: For performing successful measurements within limited experimental time, efficient use of preliminary data plays a crucial role. This work shows that a simple feedforward type neural networks approach for learning preliminary experimental data can provide quick access to simulate the experiment within the learned range. The approach is especially beneficial for physical properties measurements wit… ▽ More For performing successful measurements within limited experimental time, efficient use of preliminary data plays a crucial role. This work shows that a simple feedforward type neural networks approach for learning preliminary experimental data can provide quick access to simulate the experiment within the learned range. The approach is especially beneficial for physical properties measurements with scanning on multiple axes, where derivative or integration of data are required to obtain the objective quantity. Due to its simplicity, the learning process is fast enough for the users to perform learning and simulation on-the-fly by using a combination of open-source optimization techniques and deep-learning libraries. Here such a tool for augmenting the experimental data is proposed, aiming to help researchers to decide the most suitable experimental conditions before performing costly experiments in real. Furthermore, this tool can also be used from the perspective of taking advantage of reutilizing and repurposing previously published data, accelerating data-driven exploration of functional materials. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Comments: 19 pages, 5 figures + 7 pages of Supporting Information

Journal ref: Digital Discovery, Advance article (2023)

Effect of Non-stoichiometry on Magnetocaloric Properties of HoB2 Gas-Atomized Particles

Authors: Takafumi D. Yamamoto, Takeya Hiroyuki, Pedro Baptista de Castro, Akiko T. Saito, Kensei Terashima, Takenori Numazawa, Yoshihiko Takano

Abstract: We fabricate gas-atomized particles by inductively melting electrode rods of HoB2-x (x = -0.3, 0, 0.3, and 1.0) and investigate the effect of non-stoichiometry on the phase fraction, microstructure, and physical properties. Shifting the stoichiometric ratio of the electrode rod to the B (Ho)-rich side increases HoB4 (Ho) phase in the resulting atomized particles. Even if the atomized particles con… ▽ More We fabricate gas-atomized particles by inductively melting electrode rods of HoB2-x (x = -0.3, 0, 0.3, and 1.0) and investigate the effect of non-stoichiometry on the phase fraction, microstructure, and physical properties. Shifting the stoichiometric ratio of the electrode rod to the B (Ho)-rich side increases HoB4 (Ho) phase in the resulting atomized particles. Even if the atomized particles contain 15-20 weight percent (wt.%) of the impurity phase, the influence of which on the physical properties is less severe: the maximum value of the magnetic entropy change is only reduced by 10% compared to HoB2.0 particles. We further find that the ductile Ho phase exists so as to fill the space between the brittle HoB2 phases in the atomized particles, which may be beneficial to the mechanical properties of the particles. Our findings suggest that it would be better to use the Ho-rich electrode rods than the stoichiometric ones to produce HoB2-x particles with more suitable properties as a magnetic refrigerant for magnetic refrigeration systems. △ Less

Submitted 26 May, 2022; originally announced May 2022.

Journal ref: IEEE Transactions on Magnetics 58 (2022) 2501406

Gas-atomized particles of giant magnetocaloric compound HoB2 for magnetic hydrogen liquefiers

Authors: Takafumi D. Yamamoto, Hiroyuki Takeya, Akiko T. Saito, Kensei Terashima, Pedro Baptista de Castro, Takenori Numazawa, Yoshihiko Takano

Abstract: The processing of promising magnetocaloric materials into spheres is one of the important issues on developing high-performance magnetic refrigeration systems. In the present study, we achieved in producing spherical particles of a giant magnetocaloric compound HoB2 by a crucible-free gas atomization process, despite its high melting point of 2350 C. The particle size distribution ranges from 100… ▽ More The processing of promising magnetocaloric materials into spheres is one of the important issues on developing high-performance magnetic refrigeration systems. In the present study, we achieved in producing spherical particles of a giant magnetocaloric compound HoB2 by a crucible-free gas atomization process, despite its high melting point of 2350 C. The particle size distribution ranges from 100 to 710 micrometers centered at 212-355 micrometers with the highest yield of 14-20wt% of total melted electrode, which is suitable for magnetic refrigeration systems. The majority of the resulting particles are mostly spherical with no contamination during the processing, while unique microstructures are observed on the surface and inside. These spherical particles exhibit sharp magnetic transitions and huge magnetic entropy change of 0.34 J cm^{-3} K^{-1} for a magnetic field change of 5 T at 15.5 K. The high sphericality and the high magnetocaloric performance suggest that the HoB2 gas-atomized particles have good potential as magnetic refrigerants for use in magnetic refrigerators for hydrogen liquefaction. △ Less

Submitted 22 April, 2022; originally announced April 2022.

Comments: 6pages(double column), 6 figures

Journal ref: Applied Physics A 127, 301 (2021)

Adiabatic temperature change in ErAl2/metal PIT wires: A practical method for estimating the magnetocaloric response of magnetocaloric composites

Authors: Takafumi D. Yamamoto, Hiroyuki Takeya, Kensei Terashima, Suguru Iwasaki, Pedro Baptista de Castro, Takenori Numazawa, Yoshihiko Takano

Abstract: We report the adiabatic temperature change in ErAl2 magnetocaloric wires fabricated by a powder-in-tube (PIT) process. The adiabatic temperature change of the PIT wires is found to be determined by not only the volume fraction of ErAl2 core but also the magnitude relationship between the specific heat of the ErAl2 core and the metal sheath. We propose a quantitative analysis method for calculating… ▽ More We report the adiabatic temperature change in ErAl2 magnetocaloric wires fabricated by a powder-in-tube (PIT) process. The adiabatic temperature change of the PIT wires is found to be determined by not only the volume fraction of ErAl2 core but also the magnitude relationship between the specific heat of the ErAl2 core and the metal sheath. We propose a quantitative analysis method for calculating the temperature and core volume fraction dependence of adiabatic temperature change in the PIT wire, whose formula is applicable to also various magnetocaloric composites, useful to estimate the magnetocaloric response prior to fabrication. △ Less

Submitted 20 April, 2022; originally announced April 2022.

Comments: 14 pages, 5 figures

Journal ref: Journal of Magnetism and Magnetic Materials 513 (2020) 167207

Rationalizing the influence of tunable energy levels on quantum efficiency to design optimal non-fullerene acceptor-based ternary organic solar cells

Authors: Safakath Karuthedath, Sri H. K . Paleti, Anirudh Sharma, Hang Yin, Catherine S. P. De Castro, Si Chen, Han Xi, Nisreen Alshehri, Nicolas Ramos, Jafar I. Khan, Jaime Martin, Gang Li, Frédéric Laquai, Derya Baran, Julien Gorenflot

Abstract: Non-fullerene acceptor (NFA)-based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. We study how the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces impact the QE in blends of PBDB-T-2F… ▽ More Non-fullerene acceptor (NFA)-based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. We study how the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces impact the QE in blends of PBDB-T-2F donor with several pairs of lower bandgap NFAs. As in binary blends, the ionization energy offset between donor and acceptor (ΔIE) controls the QE and maximizes for ΔIE > 0.5 eV. However, ΔIE is not controlled by the individual NFAs IEs but by their average, weighted for their blending ratio. Using this property, we improved the QE of a PBDB-T-2F:IEICO binary blend that had an insufficient ΔIE for charge generation by adding a deep IE third component: IT-4F. Combining two NFAs enables to optimize the D/A energy alignment and cells' QE without molecular engineering. △ Less

Submitted 12 February, 2023; v1 submitted 12 December, 2021; originally announced December 2021.

Comments: S Karuthedath and S H K Paleti contributed equally. MS: 35 pages, 9 figures. SI: 21 pages, 23 figures - updates: added a model scheme as Fig1, updated T1 EQE and blends PL in Fig 2 (former 1). Added Figure (5): charge generation upon acceptor excitation. Corrected ΔIEs in fig7 and 9 (a few tens of meV off). Added more blends to show generality (2 groups, 10 blends compositions)

Journal ref: Adv. Energy Mater. 2023, 2203464

XERUS: An open-source tool for quick XRD phase identification and refinement automation

Authors: Pedro Baptista de Castro, Kensei Terashima, Miren Garbiñe Esparza Echevarría, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Analysis of XRD diffraction patterns is one of the keystones of materials science and materials research. With the advancement of data-driven methods for materials design, candidate materials can be quickly screened for the study of a desired physical property. Efficient methods to automatically analyze and identify phases present in a given pattern, are paramount for the success of this new parad… ▽ More Analysis of XRD diffraction patterns is one of the keystones of materials science and materials research. With the advancement of data-driven methods for materials design, candidate materials can be quickly screened for the study of a desired physical property. Efficient methods to automatically analyze and identify phases present in a given pattern, are paramount for the success of this new paradigm. To aid this process, the open source python package Xray Estimation and Refinement Using Similarity (XERUS) for semi-automatic/automatic phase identification is presented. XERUS takes advantages of open crystal structure databases, not relying on proprietary databases, to obtain crystal structures on the fly, being then chemical space agnostic. By wrapping around GSASII, it can automatically simulate patterns and calculate similarity measures used for phase identification. Our approach is simple and quick but also applicable to multiphase identification, by coupling the similarity calculations with quick refinements followed by an iterative peak removal process. XERUS is shown in action in four different experimental datasets and also it is benchmarked against a recently proposed deep learning method for a mixture dataset covering the Li-Mn-O-F chemical space. XERUS will be freely available on https://www.github.com/pedrobcst/Xerus/ △ Less

Submitted 9 December, 2021; originally announced December 2021.

Mixtures of self-propelled particles interacting with asymmetric obstacles

Authors: Mauricio Rojas-Vega, Pablo de Castro, Rodrigo Soto

Abstract: In the presence of an obstacle, active particles condensate into a surface "wetting" layer due to persistent motion. If the obstacle is asymmetric, a rectification current arises in addition to wetting. Asymmetric geometries are therefore commonly used to concentrate microorganisms like bacteria and sperms. However, most studies neglect the fact that biological active matter is diverse, composed o… ▽ More In the presence of an obstacle, active particles condensate into a surface "wetting" layer due to persistent motion. If the obstacle is asymmetric, a rectification current arises in addition to wetting. Asymmetric geometries are therefore commonly used to concentrate microorganisms like bacteria and sperms. However, most studies neglect the fact that biological active matter is diverse, composed of individuals with distinct self-propulsions. Using simulations, we study a mixture of "fast" and "slow" active Brownian disks in two dimensions interacting with large half-disk obstacles. With this prototypical obstacle geometry, we analyze how the stationary collective behavior depends on the degree of self-propulsion "diversity", defined as proportional to the difference between the self-propulsion speeds, while keeping the average self-propulsion speed fixed. A wetting layer rich in fast particles arises. The rectification current is amplified by speed diversity due to a superlinear dependence of rectification on self-propulsion speed, which arises from cooperative effects. Thus, the total rectification current cannot be obtained from an effective one-component active fluid with the same average self-propulsion speed, highlighting the importance of considering diversity in active matter. Finally, rectification alters particle evaporation and absorption by the layer, making the density of the dilute phase increase with the global density. Therefore, the steady state violates the lever rule, a result which is valid even for systems of identical particles. △ Less

Submitted 3 June, 2023; v1 submitted 10 November, 2021; originally announced November 2021.

Comments: 13 pages, 11 figures

High-pressure Mg-Sc-H phase diagram and its superconductivity from first-principles calculations

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: In this work, global search for crystal structures of ternary Mg-Sc-H hydrides (Mg$_x$Sc$_y$H$_z$) under high pressure ($100 \le P \le 200$ GPa) were performed using the evolutionary algorithm and first-principles calculations. Based on them, we computed the thermodynamic convex hull and pressure-dependent phase diagram of Mg$_x$Sc$_y$H$_z$ for $z/(x+y) < 4$. We have identified the stable crystal… ▽ More In this work, global search for crystal structures of ternary Mg-Sc-H hydrides (Mg$_x$Sc$_y$H$_z$) under high pressure ($100 \le P \le 200$ GPa) were performed using the evolutionary algorithm and first-principles calculations. Based on them, we computed the thermodynamic convex hull and pressure-dependent phase diagram of Mg$_x$Sc$_y$H$_z$ for $z/(x+y) < 4$. We have identified the stable crystal structures of four thermodynamically stable compounds with the higher hydrogen content, i.e., $R\bar{3}m$-MgScH$_{6}$, $C2/m$-Mg$_{2}$ScH$_{10}$, $Immm$-MgSc$_{2}$H$_{9}$ and $Pm\bar{3}m$-Mg(ScH$_{4}$)$_{3}$. Their superconducting transition temperatures were computationally predicted by the McMillan-Allen-Dynes formula combined with first-principles phonon calculations. They were found to exhibit superconductivity; among them, $R\bar{3}m$-MgScH$_{6}$ was predicted to have the highest $T_{c}$ (i.e. 23.34 K) at 200 GPa. △ Less

Submitted 14 September, 2021; originally announced September 2021.

Comments: 7 pages, 5 figures, 1 Supplemental Material

The systematic study on the stability and superconductivity of Y-Mg-H compounds under high pressure

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: Motivated by recent discovery of yttrium-based high-temperature ternary superconducting hydrides (e.g., CaYH$_{12}$, LaYH$_{12}$, and ScYH$_{6}$), we have employed evolutionary algorithm and first-principles calculations to comprehensively examine the structural stability and superconductivity of the YMgH$_{x}$ system at high pressure. The hydrogen content $x$ and the pressure are both important f… ▽ More Motivated by recent discovery of yttrium-based high-temperature ternary superconducting hydrides (e.g., CaYH$_{12}$, LaYH$_{12}$, and ScYH$_{6}$), we have employed evolutionary algorithm and first-principles calculations to comprehensively examine the structural stability and superconductivity of the YMgH$_{x}$ system at high pressure. The hydrogen content $x$ and the pressure are both important factors in the stability of these candidate structures. We find that the stability of hydrogen-rich materials frequently necessitates higher pressure. For instance, the pressures to stabilize $P4/mmm$-YMgH$_{8}$ and $Cmmm$-YMgH$_{12}$ are both more than 250 GPa. Hydrogen-less materials, such as $I4_{1}/amd$-YMgH$_{2}$ and $P6_{3}/mmc$-YMgH$_{3}$, can be stable at pressures as low as 100 GPa. In addition, we find a metastable structure for YMgH$_{6}$ with the same space group as the $P4/mmm$-YMgH$_{8}$. A metastable sodalite-like face-centered cubic (FCC) structure is also found in YMgH$_{12}$. These four clathrate structures of $P4/mmm$-YMgH$_{6}$, $P4/mmm$-YMgH$_{8}$, $Cmmm$-YMgH$_{12}$, and $Fd\bar{3}m$-YMgH$_{12}$ is made up of H14, H18, H24, and H24 cages, respectively, in which the H-H pair exhibits weak covalent bonding. According to phonon calculations, $P4/mmm$-YMgH$_{6}$ and $P4/mmm$-YMgH$_{8}$ require a pressure of 300 GPa to maintain dynamic stability, however $Cmmm$-YMgH$_{12}$ and $Fd\bar{3}m$-YMgH$_{12}$ can maintain dynamic stability at pressures of 200 GPa and 250 GPa, respectively. Electron-phonon coupling calculations indicate that they might be potential high-temperature superconductors, with superconductivity intimately linked to the H cage structure. The sodalite structure $Fd\bar{3}m$-YMgH$_{12}$ has a $T_\mathrm{c}$ value of 190 K and a strong electron-phonon coupling constant of 2.18. △ Less

Submitted 17 July, 2021; v1 submitted 12 July, 2021; originally announced July 2021.

Comments: 7 pages, 5 figures, 1 Supplemental Material

Diversity of self-propulsion speeds reduces motility-induced clustering in confined active matter

Authors: Pablo de Castro, Francisco M. Rocha, Saulo Diles, Rodrigo Soto, Peter Sollich

Abstract: Self-propelled swimmers such as bacteria agglomerate into clusters as a result of their persistent motion. In 1D, those clusters do not coalesce macroscopically and the stationary cluster size distribution (CSD) takes an exponential form. We develop a minimal lattice model for active particles in narrow channels to study how clustering is affected by the interplay between self-propulsion speed div… ▽ More Self-propelled swimmers such as bacteria agglomerate into clusters as a result of their persistent motion. In 1D, those clusters do not coalesce macroscopically and the stationary cluster size distribution (CSD) takes an exponential form. We develop a minimal lattice model for active particles in narrow channels to study how clustering is affected by the interplay between self-propulsion speed diversity and confinement. A mixture of run-and-tumble particles with a distribution of self-propulsion speeds is simulated in 1D. Particles can swap positions at rates proportional to their relative self-propulsion speed. Without swapping, we find that the average cluster size $L_\text{c}$ decreases with diversity and follows a non-arithmetic power mean of the single-component $L_\text{c}$'s, unlike the case of tumbling-rate diversity previously studied. Effectively, the mixture is thus equivalent to a system of identical particles whose self-propulsion speed is the harmonic mean self-propulsion speed of the mixture. With swapping, particles escape more quickly from clusters. As a consequence, $L_\text{c}$ decreases with swapping rates and depends less strongly on diversity. We derive a dynamical equilibrium theory for the CSDs of binary and fully polydisperse systems. Similarly to the clustering behaviour of one-component models, our qualitative results for mixtures are expected to be universal across active matter. Using literature experimental values for the self-propulsion speed diversity of unicellular swimmers known as choanoflagellates, which naturally differentiate into slower and faster cells, we predict that the error in estimating their $L_\text{c}$ via one-component models which use the conventional arithmetic mean self-propulsion speed is around $30\%$. △ Less

Submitted 16 September, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 11 pages, 6 figures

High-$T_c$ superconducting hydrides formed by LaH$_{24}$ and YH$_{24}$ cage structures as basic blocks

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: Based on recent studies regarding high-temperature (high-$T_c$) La-Y ternary hydrides (e.g., $P{\bar{1}}$-La$_2$YH$_{12}$, $Pm{\bar{3}}m$-LaYH$_{12}$, and $Pm{\bar{3}}m$-(La,Y)H$_{10}$ with a maximum $T_c \sim 253$ K), we examined the phase and structural stabilities of the (LaH$_6$)(YH$_6$)$_y$ series as high-$T_c$ ternary hydride compositions using a genetic algorithm and $\it ab$ $\it initio$ c… ▽ More Based on recent studies regarding high-temperature (high-$T_c$) La-Y ternary hydrides (e.g., $P{\bar{1}}$-La$_2$YH$_{12}$, $Pm{\bar{3}}m$-LaYH$_{12}$, and $Pm{\bar{3}}m$-(La,Y)H$_{10}$ with a maximum $T_c \sim 253$ K), we examined the phase and structural stabilities of the (LaH$_6$)(YH$_6$)$_y$ series as high-$T_c$ ternary hydride compositions using a genetic algorithm and $\it ab$ $\it initio$ calculations. Our evaluation showed that the $Pm\bar{3}m$-LaYH$_{12}$ reported in the previous study was unstable during decomposition into $R\bar{3}c$-LaH$_{6}$ + $Im\bar{3}m$-YH$_{6}$. We also discovered new crystal structures, namely $Cmmm$-LaYH$_{12}$ ($y=1$), $R\bar{3}c$-LaYH$_{12}$ ($y=1$), $Cmmm$-LaY$_3$H$_{24}$ ($y=3$), and $R\bar{3}$-LaY$_3$H$_{24}$ ($y=3$), showing stability against such decomposition. While $R\bar{3}c$ ($y=1$) and $R\bar{3}$ ($y=3$) did not exhibit superconductivity owing to the extremely low density of states at the Fermi level, $Cmmm$ phases exhibited a $T_{c}$ of approximately 140~K at around 200~GPa owing to the extremely high electron--phonon coupling constant ($λ$ = 1.876 for LaYH$_{12}$). By the twice longer stacking for $Cmmm$-LaY$_3$H$_{24}$, the coupling constant increased owing to the chemical pressure of Y, leading to a slightly increased $T_{c}$. △ Less

Submitted 22 May, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 13 pages

High-$T_c$ ternary metal hydrides, YKH$_{12}$ and LaKH$_{12}$, discovered by machine learning

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: The search for hydride compounds that exhibit high $T_c$ superconductivity has been extensively studied. Within the range of binary hydride compounds, the studies have been developed well including data-driven searches as a topic of interest. Toward the search for the ternary systems, the number of possible combinations grows rapidly, and hence the power of data-driven search gets more prominent.… ▽ More The search for hydride compounds that exhibit high $T_c$ superconductivity has been extensively studied. Within the range of binary hydride compounds, the studies have been developed well including data-driven searches as a topic of interest. Toward the search for the ternary systems, the number of possible combinations grows rapidly, and hence the power of data-driven search gets more prominent. In this study, we constructed various regression models to predict $T_c$ for ternary hydride compounds and found the extreme gradient boosting (XGBoost) regression giving the best performance. The best performed regression predicts new promising candidates realizing higher $T_c$, for which we further identified their possible crystal structures. Confirming their lattice and thermodynamical stabilities, we finally predicted new ternary hydride superconductors, YKH$_{12}$ [$C2/m$ (No.12), $T_c$=143.2 K at 240 GPa] and LaKH$_{12}$ [$R\bar{3}m$ (No.166), $T_c$=99.2 K at 140 GPa] from first principles. △ Less

Submitted 27 February, 2021; originally announced March 2021.

Comments: 21 pages, 6 figures

SuperMat: Construction of a linked annotated dataset from superconductors-related publications

Authors: Luca Foppiano, Sae Dieb, Akira Suzuki, Pedro Baptista de Castro, Suguru Iwasaki, Azusa Uzuki, Miren Garbine Esparza Echevarria, Yan Meng, Kensei Terashima, Laurent Romary, Yoshihiko Takano, Masashi Ishii

Abstract: A growing number of papers are published in the area of superconducting materials science. However, novel text and data mining (TDM) processes are still needed to efficiently access and exploit this accumulated knowledge, paving the way towards data-driven materials design. Herein, we present SuperMat (Superconductor Materials), an annotated corpus of linked data derived from scientific publicatio… ▽ More A growing number of papers are published in the area of superconducting materials science. However, novel text and data mining (TDM) processes are still needed to efficiently access and exploit this accumulated knowledge, paving the way towards data-driven materials design. Herein, we present SuperMat (Superconductor Materials), an annotated corpus of linked data derived from scientific publications on superconductors, which comprises 142 articles, 16052 entities, and 1398 links that are characterised into six categories: the names, classes, and properties of materials; links to their respective superconducting critical temperature (Tc); and parametric conditions such as applied pressure or measurement methods. The construction of SuperMat resulted from a fruitful collaboration between computer scientists and material scientists, and its high quality is ensured through validation by domain experts. The quality of the annotation guidelines was ensured by satisfactory Inter Annotator Agreement (IAA) between the annotators and the domain experts. SuperMat includes the dataset, annotation guidelines, and annotation support tools that use automatic suggestions to help minimise human errors. △ Less

Submitted 15 April, 2021; v1 submitted 7 January, 2021; originally announced January 2021.

Journal ref: STAM:M, 2021, VOL. 1, NO. 1, 34-44

Enhancement of giant refrigerant capacity in Ho$_{1-x}$Gd$_{x}$B$_{2}$ alloys (0.1 $\leq$ x $\leq$ 0.4)

Authors: Pedro Baptista de Castro, Kensei Terashima, Takafumi D Yamamoto, Suguru Iwasaki, Akiko T. Saito, Ryo Matsumoto, Shintaro Adachi, Yoshito Saito, Mohammed ElMassalami, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Intending to optimize the giant magnetocaloric properties of HoB$_{2}$, we synthesized and magnetocalorically characterized Ho$_{1-x}$Gd$_{x}$B$_{2}$(0.1 $\leq$ x $\leq$ 0.4) alloys. We found out that Gd enters stoichiometrically and randomly into the Ho site, leading to a Vegard-type structural change. The addition of spherical S$^{7/2}$ Gd$^{3+}$ moments prompts an enhancement in Curie temperatu… ▽ More Intending to optimize the giant magnetocaloric properties of HoB$_{2}$, we synthesized and magnetocalorically characterized Ho$_{1-x}$Gd$_{x}$B$_{2}$(0.1 $\leq$ x $\leq$ 0.4) alloys. We found out that Gd enters stoichiometrically and randomly into the Ho site, leading to a Vegard-type structural change. The addition of spherical S$^{7/2}$ Gd$^{3+}$ moments prompts an enhancement in Curie temperature, a reduction in peak value of the magnetic entropy change while still being relatively high, and a broadening of the magnetic entropy change curves. The overall influence is a relatively high refrigerant capacity and relative cooling power, and an extension of the thermal working range to higher temperatures; thus, electing Ho$_{1-x}$Gd$_{x}$B$_{2}$(as potential candidates for cryogenic refrigeration applications. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Comments: 12 pages, 4 figures and 1 table

Active mixtures in a narrow channel: Motility diversity changes cluster sizes

Authors: Pablo de Castro, Saulo Diles, Rodrigo Soto, Peter Sollich

Abstract: The persistent motion of bacteria produces clusters with a stationary cluster size distribution (CSD). Here we develop a minimal model for bacteria in a narrow channel to assess the relative importance of motility diversity (i.e. polydispersity in motility parameters) and confinement. A mixture of run-and-tumble particles with a distribution of tumbling rates (denoted generically by $α$) is consid… ▽ More The persistent motion of bacteria produces clusters with a stationary cluster size distribution (CSD). Here we develop a minimal model for bacteria in a narrow channel to assess the relative importance of motility diversity (i.e. polydispersity in motility parameters) and confinement. A mixture of run-and-tumble particles with a distribution of tumbling rates (denoted generically by $α$) is considered on a 1D lattice. Particles facing each other cross at constant rate, rendering the lattice quasi-1D. To isolate the role of diversity, the global average $α$ stays fixed. For a binary mixture with no particle crossing, the average cluster size ($L_\text{c}$) increases with the diversity as lower-$α$ particles trap higher-$α$ ones for longer. At finite crossing rate, particles escape from the clusters sooner, making $L_\text{c}$ smaller and the diversity less important, even though crossing can enhance demixing of particle types between the cluster and gas phases. If the crossing rate is increased further, the clusters become controlled by particle crossing. We also consider an experiment-based continuous distribution of tumbling rates, revealing similar physics. Using parameters fitted from experiments with Escherichia coli bacteria, we predict that the error in estimating $L_\text{c}$ without accounting for polydispersity is around $60\%$. We discuss how to find a binary system with the same CSD as the fully polydisperse mixture. An effective theory is developed and shown to give accurate expressions for the CSD, the effective $α$, and the average fraction of mobile particles. We give reasons why our qualitative results are expected to be valid for other active matter models and discuss the changes that would result from polydispersity in the active speed rather than in the tumbling rate. △ Less

Submitted 17 November, 2020; originally announced November 2020.

Comments: 12 pages, 9 figures

Modeling the Field Emission Enhancement Factor for Capped Carbon Nanotubes using the Induced Electron Density

Authors: Caio P. de Castro, Thiago A. de Assis, Roberto Rivelino, Fernando de B. Mota, Caio M. C. de Castilho, Richard G. Forbes

Abstract: In many field electron emission experiments on single-walled carbon nanotubes (SWCNTs), the SWCNT stands on one of two well-separated parallel plane plates, with a macroscopic field FM applied between them. For any given location "L" on the SWCNT surface, a field enhancement factor (FEF) is defined as $F_{\rm{L}}$/$F_{\rm{M}}$, where $F_{\rm{L}}$ is a local field defined at "L". The best emission… ▽ More In many field electron emission experiments on single-walled carbon nanotubes (SWCNTs), the SWCNT stands on one of two well-separated parallel plane plates, with a macroscopic field FM applied between them. For any given location "L" on the SWCNT surface, a field enhancement factor (FEF) is defined as $F_{\rm{L}}$/$F_{\rm{M}}$, where $F_{\rm{L}}$ is a local field defined at "L". The best emission measurements from small-radii capped SWCNTs exhibit characteristic FEFs that are constant (i.e., independent of $F_{\rm{M}}$). This paper discusses how to retrieve this result in quantum-mechanical (as opposed to classical electrostatic) calculations. Density functional theory (DFT) is used to analyze the properties of two short, floating SWCNTS, capped at both ends, namely a (6,6) and a (10,0) structure. Both have effectively the same height ($\sim 5.46$ nm) and radius ($\sim 0.42$ nm). It is found that apex values of local induced FEF are similar for the two SWCNTs, are independent of $F_{\rm{M}}$, and are similar to FEF-values found from classical conductor models. It is suggested that these induced-FEF values relate to the SWCNT longitudinal system polarizabilities, which are presumed similar. The DFT calculations also generate "real", as opposed to ``induced", potential-energy (PE) barriers for the two SWCNTs, for FM-values from 3 V/$μ$m to 2 V/nm. PE profiles along the SWCNT axis and along a parallel ``observation line" through one of the topmost atoms are similar. At low macroscopic fields the details of barrier shape differ for the two SWCNT types. Even for $F_{\rm{M}}=0$, there are distinct PE structures present at the emitter apex (different for the two SWCNTs); this suggests the presence of structure-specific chemically induced charge transfers and related patch-field distributions. △ Less

Submitted 19 June, 2020; originally announced June 2020.

Effect of Dy substitution in the giant magnetocaloric properties of HoB$_{2}$

Authors: Pedro Baptista de Castro, Kensei Terashima, Takafumi D. Yamamoto, Suguru Iwasaki, Ryo Matsumoto, Shintaro Adachi, Yoshito Saito, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB$_{2}$. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho$_{1-x}$Dy$_{x}$B$_{2}$ alloys ($\textit{x}$ = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature ($\textit{T}$$_{C}$) gradually increases upon Dy substitut… ▽ More Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB$_{2}$. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho$_{1-x}$Dy$_{x}$B$_{2}$ alloys ($\textit{x}$ = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature ($\textit{T}$$_{C}$) gradually increases upon Dy substitution, while the magnitude of the magnetic entropy change |$Δ\textit{S}_{M}$| at $\textit{T}$ = $\textit{T}_{C}$ decreases from 0.35 to 0.15 J cm$^{-3}$ K$^{-1}$ for a field change of 5 T. Due to the presence of two magnetic transitions in these alloys, despite the change in the peak magnitude of |$Δ\textit{S}_{M}$|, the refrigerant capacity ($\textit{RC}$) and refrigerant cooling power ($\textit{RCP}$) remains almost constant in all doping range, which as large as 5.5 J cm$^{-3}$ and 7.0 J cm$^{-3}$ for a field change of 5 T. These results imply that this series of alloys could be an exciting candidate for magnetic refrigeration in the temperature range between 10-50 K. △ Less

Submitted 25 May, 2020; originally announced May 2020.

Comments: 19 pages, 5 figures, 2 tables

Journal ref: Science and Technology of Advanced Materials 2020

Machine Learning Guided Discovery of Gigantic Magnetocaloric Effect in HoB$_{2}$ Near Hydrogen Liquefaction Temperature

Authors: Pedro Baptista de Castro, Kensei Terashima, Takafumi D Yamamoto, Zhufeng Hou, Suguru Iwasaki, Ryo Matsumoto, Shintaro Adachi, Yoshito Saito, Peng Song, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Magnetic refrigeration exploits the magnetocaloric effect which is the entropy change upon application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than the conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials which exhibits large magnetocaloric effect, these properties for a large number of compound… ▽ More Magnetic refrigeration exploits the magnetocaloric effect which is the entropy change upon application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than the conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials which exhibits large magnetocaloric effect, these properties for a large number of compounds still remain unknown. To explore new functional materials in this unknown space, machine learning is used as a guide for selecting materials which could exhibit large magnetocaloric effect. By this approach, HoB$_{2}$ is singled out, synthesized and its magnetocaloric properties are evaluated, leading to the experimental discovery of gigantic magnetic entropy change 40.1 J kg$^{-1}$ K$^{-1}$ (0.35 J cm$^{-3}$ K$^{-1}$) for a field change of 5 T in the vicinity of a ferromagnetic second-order phase transition with a Curie temperature of 15 K. This is the highest value reported so far, to our knowledge, near the hydrogen liquefaction temperature thus it is a highly suitable material for hydrogen liquefaction and low temperature magnetic cooling applications. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Comments: 12 pages including 3 figures and 1 table + 11 pages of supplementary information. Published version available at: https://rdcu.be/b36ep

Journal ref: NPG Asia Materials 12:35 (2020)

Demonstration of Electric Double Layer Gating under High Pressure by the Development of Field-Effect Diamond Anvil Cell

Authors: Shintaro Adachi, Ryo Matsumoto, Sayaka Yamamoto, Takafumi D. Yamamoto, Kensei Terashima, Yoshito Saito, Miren Esparza Echevarria, Pedro Baptista de Castro, Peng Song, Suguru Iwasaki, Hiroyuki Takeya, Yoshihiko Takano

Abstract: We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied to a Bi thin film, and here we report the field-effect under high pressure in the material. Our EDLT-DAC is a promising device for exploring unknown physical ph… ▽ More We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied to a Bi thin film, and here we report the field-effect under high pressure in the material. Our EDLT-DAC is a promising device for exploring unknown physical phenomena such as high transition-temperature superconductivity (HTS). △ Less

Submitted 23 May, 2020; v1 submitted 23 February, 2020; originally announced February 2020.

Comments: 10 pages, 4 figures

Journal ref: Appl. Phys. Lett. (2020)

Run-and-tumble bacteria slowly approaching the diffusive regime

Authors: Andrea Villa-Torrealba, Cristóbal Chávez Raby, Pablo de Castro, Rodrigo Soto

Abstract: The run-and-tumble (RT) dynamics followed by bacterial swimmers gives rise first to a ballistic motion due to their persistence, and later, through consecutive tumbles, to a diffusive process. Here we investigate how long it takes for a dilute swimmer suspension to reach the diffusive regime as well as what is the amplitude of the deviations from the diffusive dynamics. A linear time dependence of… ▽ More The run-and-tumble (RT) dynamics followed by bacterial swimmers gives rise first to a ballistic motion due to their persistence, and later, through consecutive tumbles, to a diffusive process. Here we investigate how long it takes for a dilute swimmer suspension to reach the diffusive regime as well as what is the amplitude of the deviations from the diffusive dynamics. A linear time dependence of the mean-squared displacement (MSD) is insufficient to characterize diffusion and thus we also focus on the excess kurtosis of the displacement distribution. Four swimming strategies are considered: (i) the conventional RT model with complete reorientation after tumbling, (ii) the case of partial reorientation, characterized by a distribution of tumbling angles, (iii) a run-and-reverse model with rotational diffusion, and (iv) a RT particle where the tumbling rate depends on the stochastic concentration of an internal protein. By analyzing the associated kinetic equations for the probability density function and simulating the models, we find that for models (ii), (iii), and (iv) the relaxation to diffusion can take much longer than the mean time between tumble events, evidencing the existence of large tails in the particle displacements. Moreover, the excess kurtosis can assume large positive values. In model (ii) it is possible for some distributions of tumbling angles that the MSD reaches a linear time dependence but, still, the dynamics remains non-Gaussian for long times. This is also the case in model (iii) for small rotational diffusivity. For all models, the long-time diffusion coefficients are also obtained. The theoretical approach, which relies on eigenvalue and angular Fourier expansions of the van Hove function, is in excellent agreement with the simulations. △ Less

Submitted 1 June, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: 12 pages, 4 captioned figures. Accepted for publication in Physical Review E

Journal ref: Phys. Rev. E 101, 062607 (2020)

Magnetic entropy change of ErAl2 magnetocaloric wires fabricated by a powder-in-tube method

Authors: Takafumi D. Yamamoto, Hiroyuki Takeya, Suguru Iwasaki, Kensei Terashima, Pedro Baptista de Castro, Takenori Numazawa, Yoshihiko Takano

Abstract: We report the fabrication of ErAl2 magnetocaloric wires by a powder-in-tube method (PIT) and the evaluation of magnetic entropy change through magnetization measurements. The magnetic entropy change of ErAl2 PIT wires exhibits similar behavior to the bulk counterpart, while its magnitude is reduced by the decrease in the volume fraction of ErAl2 due to the surrounding non-magnetic sheaths. We find… ▽ More We report the fabrication of ErAl2 magnetocaloric wires by a powder-in-tube method (PIT) and the evaluation of magnetic entropy change through magnetization measurements. The magnetic entropy change of ErAl2 PIT wires exhibits similar behavior to the bulk counterpart, while its magnitude is reduced by the decrease in the volume fraction of ErAl2 due to the surrounding non-magnetic sheaths. We find that another effect reduces the magnetic entropy change of the ErAl2 PIT wires around the Curie temperature, and discuss its possible origin in terms of a correlation between magnetic properties of ErAl2 and mechanical properties of sheath material. △ Less

Submitted 1 January, 2020; originally announced January 2020.

Comments: This is the version of the article before peer review or editing, as submitted by an author to {insert name of Journal}. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at {https://dx.doi.org/10.1088/1361-6463/ab5c71}

Journal ref: J. Phys. D: Appl. Phys. 53, 095004 (2020)

Phase separation of mixtures after a second quench: composition heterogeneities

Authors: Pablo de Castro, Peter Sollich

Abstract: We investigate binary mixtures undergoing phase separation after a second (deeper) temperature quench into two- and three-phase coexistence regions. The analysis is based on a lattice theory previously developed for gas-liquid separation in generic mixtures. Our previous results, which considered an arbitrary number of species and a single quench, showed that, due to slow changes in composition, d… ▽ More We investigate binary mixtures undergoing phase separation after a second (deeper) temperature quench into two- and three-phase coexistence regions. The analysis is based on a lattice theory previously developed for gas-liquid separation in generic mixtures. Our previous results, which considered an arbitrary number of species and a single quench, showed that, due to slow changes in composition, dense colloidal mixtures can phase-separate in two stages. Moreover, the denser phase contains long-lived composition heterogeneities that originate as the interfaces of shrunk domains. Here we predict several new effects that arise after a second quench, mostly associated with the extent to which crowding can slow down 'fractionation', i.e. equilibration of compositions. They include long-lived regular arrangements of secondary domains; wetting of fractionated interfaces by oppositely fractionated layers; 'surface'-directed spinodal 'waves' propagating from primary interfaces; a 'dead zone' where no phase separation occurs; and, in the case of three-phase coexistence, filamentous morphologies arising out of secondary domains. △ Less

Submitted 23 August, 2019; originally announced August 2019.

Comments: 13 pages, 17 figures

Journal ref: Soft Matter, 2019, 15, 9287 - 9299

On the quantum mechanics of how an ideal carbon nanotube field emitter can exhibit a constant field enhancement factor

Authors: Caio P. de Castro, Thiago A. de Assis, Roberto Rivelino, Fernando de B. Mota, Caio M. C. de Castilho, Richard G. Forbes

Abstract: Measurements of current-voltage characteristics from ideal carbon nanotube (CNT) field electron emitters of small apex radius have shown that these emitters can exhibit a linear Fowler-Nordheim (FN) plot [e.g., Dean and Chalamala, Appl. Phys. Lett., 76, 375, 2000]. From such a plot, a constant (voltage-independent) characteristic field enhancement factor (FEF) can be deduced. Over fifteen years la… ▽ More Measurements of current-voltage characteristics from ideal carbon nanotube (CNT) field electron emitters of small apex radius have shown that these emitters can exhibit a linear Fowler-Nordheim (FN) plot [e.g., Dean and Chalamala, Appl. Phys. Lett., 76, 375, 2000]. From such a plot, a constant (voltage-independent) characteristic field enhancement factor (FEF) can be deduced. Over fifteen years later, this experimental result has not yet been convincingly retrieved from first-principles electronic structure calculations, or more generally from quantum mechanics (QM). On the contrary, several QM calculations have deduced that the characteristic FEF should be a function of the macroscopic field applied to the CNT. This apparent contradiction between experiment and QM theory has been an unexplained feature of CNT emission science, and has raised doubts about the ability of existing QM models to satisfactorily describe experimental CNT emission behavior. In this work we demonstrate, by means of a density functional theory analysis of single-walled CNTs "floating" in an applied macroscopic field, the following significant result. This is that agreement between experiment, classical-conductor CNT models and QM calculations can be achieved if the latter are used to calculate (from the "real" total-charge-density distributions initially obtained) the distributions of $\textit{induced}$ charge-density, induced local fields and induced local FEFs. The present work confirms, more reliably and in significantly greater detail than in earlier work on a different system, that this finding applies to the common "post-on-a-conducing plane" situation of CNT field electron emission. This finding also brings out various further theoretical questions that need to be explored. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Restoring observed classical behavior of the carbon nanotube field emission enhancement factor from the electronic structure

Authors: Caio P. de Castro, Thiago A. de Assis, Roberto Rivelino, Fernando de B. Mota, Caio M. C. de Castilho, Richard G. Forbes

Abstract: Experimental Fowler-Nordheim plots taken from orthodoxly behaving carbon nanotube (CNT) field electron emitters are known to be linear. This shows that, for such emitters, there exists a characteristic field enhancement factor (FEF) that is constant for a range of applied voltages and applied macroscopic fields $F_\text{M}$. A constant FEF of this kind can be evaluated for classical CNT emitter mo… ▽ More Experimental Fowler-Nordheim plots taken from orthodoxly behaving carbon nanotube (CNT) field electron emitters are known to be linear. This shows that, for such emitters, there exists a characteristic field enhancement factor (FEF) that is constant for a range of applied voltages and applied macroscopic fields $F_\text{M}$. A constant FEF of this kind can be evaluated for classical CNT emitter models by finite-element and other methods, but (apparently contrary to experiment) several past quantum-mechanical (QM) CNT calculations find FEF-values that vary with $F_\text{M}$. A common feature of most such calculations is that they focus only on deriving the CNT real-charge distributions. Here we report on calculations that use density functional theory (DFT) to derive real-charge distributions, and then use these to generate the related induced-charge distributions and related fields and FEFs. We have analysed three carbon nanostructures involving CNT-like nanoprotrusions of various lengths, and have also simulated geometrically equivalent classical emitter models, using finite-element methods. We find that when the DFT-generated local induced FEFs (LIFEFs) are used, the resulting values are effectively independent of macroscopic field, and behave in the same qualitative manner as the classical FEF-values. Further, there is fair to good quantitative agreement between a characteristic FEF determined classically and the equivalent characteristic LIFEF generated via DFT approaches. Although many issues of detail remain to be explored, this appears to be a significant step forwards in linking classical and QM theories of CNT electrostatics. It also shows clearly that, for ideal CNTs, the known experimental constancy of the FEF value for a range of macroscopic fields can also be found in appropriately developed QM theory. △ Less

Submitted 29 October, 2019; v1 submitted 3 December, 2018; originally announced December 2018.

Comments: A slightly revised version has been published - citation below - under a title different from that originally used. The new title is: "Restoring observed classical behavior of the carbon nanotube field emission enhancement factor from the electronic structure"

Journal ref: J. Phys. Chem. C 123 (2019) 5144-5149

Critical phase behavior in multi-component fluid mixtures: Complete scaling analysis

Authors: Pablo de Castro, Peter Sollich

Abstract: We analyze the critical gas-liquid phase behavior of arbitrary fluid mixtures in their coexistence region. We focus on the setting relevant for polydisperse colloids, where the overall density and composition of the system are being controlled, in addition to temperature. Our analysis uses the complete scaling formalism and thus includes pressure mixing effects in the mapping from thermodynamic fi… ▽ More We analyze the critical gas-liquid phase behavior of arbitrary fluid mixtures in their coexistence region. We focus on the setting relevant for polydisperse colloids, where the overall density and composition of the system are being controlled, in addition to temperature. Our analysis uses the complete scaling formalism and thus includes pressure mixing effects in the mapping from thermodynamic fields to the effective fields of 3D Ising criticality. Because of fractionation, where mixture components are distributed unevenly across coexisting phases, the critical behavior is remarkably rich. We give scaling laws for a number of important loci in the phase diagram. These include the cloud and shadow curves, which characterise the onset of phase coexistence, a more general set of curves defined by fixing the fractional volumes of the coexisting phases to arbitrary values, and conventional coexistence curves of the densities of coexisting phases for fixed overall density. We identify suitable observables (distinct from the Yang-Yang anomalies discussed in the literature) for detecting pressure mixing effects. Our analytical predictions are checked against numerics using a set of mapping parameters fitted to simulation data for a polydisperse Lennard-Jones fluid, allowing us to highlight crossovers where pressure mixing becomes relevant close to the critical point. △ Less

Submitted 25 November, 2018; v1 submitted 14 October, 2018; originally announced October 2018.

Comments: 21 pages, 7 captioned figures

Journal ref: J. Chem. Phys. 149, 204902 (2018)

Schramm-Loewner evolution and perimeter of percolation clusters of correlated random landscapes

Authors: Caio P. de Castro, Mirko Lukovic, Giacomo Pompanin, Roberto F. S. Andrade, Hans J. Herrmann

Abstract: Motivated by the fact that many physical landscapes are characterized by long-range height-height correlations that are quantified by the Hurst exponent H, we investigate the statistical properties of the iso-height lines of correlated surfaces in the framework of Schramm-Loewner evolution (SLE). We show numerically that in the continuum limit the external perimeter of a percolating cluster of cor… ▽ More Motivated by the fact that many physical landscapes are characterized by long-range height-height correlations that are quantified by the Hurst exponent H, we investigate the statistical properties of the iso-height lines of correlated surfaces in the framework of Schramm-Loewner evolution (SLE). We show numerically that in the continuum limit the external perimeter of a percolating cluster of correlated surfaces with H between -1 and zero is statistically equivalent to SLE curves. Our results suggest that the external perimeter also retains the Markovian properties, confirmed by the absence of time correlations in the driving function and the fact that the latter is Gaussian distributed for any specific time. We also confirm that for all H the variance of the winding angle grows logarithmically with size. △ Less

Submitted 8 December, 2017; originally announced December 2017.

The influence of statistical properties of Fourier coefficients on random surfaces

Authors: C. P. de Castro, M. Lukovic, R. F. S. Andrade, H. J. Herrmann

Abstract: Many examples of natural systems can be described by random Gaussian surfaces. Much can be learned by analyzing the Fourier expansion of the surfaces, from which it is possible to determine the corresponding Hurst exponent and consequently establish the presence of scale invariance. We show that this symmetry is not affected by the distribution of the modulus of the Fourier coefficients. Furthermo… ▽ More Many examples of natural systems can be described by random Gaussian surfaces. Much can be learned by analyzing the Fourier expansion of the surfaces, from which it is possible to determine the corresponding Hurst exponent and consequently establish the presence of scale invariance. We show that this symmetry is not affected by the distribution of the modulus of the Fourier coefficients. Furthermore, we investigate the role of the Fourier phases of random surfaces. In particular, we show how the surface is affected by a non-uniform distribution of phases. △ Less

Submitted 31 August, 2017; originally announced August 2017.

Journal ref: Scientific Reports 7, Article number: 1961 (2017)

Phase separation dynamics of polydisperse colloids: a mean-field lattice-gas theory

Authors: Pablo de Castro, Peter Sollich

Abstract: New insights into phase separation in colloidal suspensions are provided via a new dynamical theory based on the Polydisperse Lattice-Gas model. The model gives a simplified description of polydisperse colloids, incorporating a hard-core repulsion combined with polydispersity in the strength of the attraction between neighbouring particles. Our mean-field equations describe the local concentration… ▽ More New insights into phase separation in colloidal suspensions are provided via a new dynamical theory based on the Polydisperse Lattice-Gas model. The model gives a simplified description of polydisperse colloids, incorporating a hard-core repulsion combined with polydispersity in the strength of the attraction between neighbouring particles. Our mean-field equations describe the local concentration evolution for each of an arbitrary number of species, and for an arbitrary overall composition of the system. We focus on the predictions for the dynamics of colloidal gas-liquid phase separation after a quench into the coexistence region. The critical point and the relevant spinodal curves are determined analytically, with the latter depending only on three moments of the overall composition. The results for the early-time spinodal dynamics show qualitative changes as one crosses a 'quenched' spinodal that excludes fractionation and so allows only density fluctuations at fixed composition. This effect occurs for dense systems, in agreement with a conjecture by Warren that, at high density, fractionation should be generically slow because it requires inter-diffusion of particles. We verify this conclusion by showing that the observed qualitative changes disappear when direct particle-particle swaps are allowed in the dynamics. Finally, the rich behaviour beyond the spinodal regime is examined, where we find that the evaporation of gas bubbles with strongly fractionated interfaces causes long-lived composition heterogeneities in the liquid phase; we introduce a two-dimensional density histogram method that allows such effects to be easily visualized for an arbitrary number of particle species. △ Less

Submitted 2 August, 2017; v1 submitted 16 June, 2017; originally announced June 2017.

Comments: 20 pages; accepted for publication in Physical Chemistry Chemical Physics

Micellar shape anisotropy and elastic constants in discotic lyotropic liquid crystals

Authors: P. A. de Castro, A. J. Palangana, L. R. Evangelista

Abstract: The elastic constants of a discotic lyotropic nematic liquid crystal are calculated by means of a pseudo-molecular approach as functions of the micellar shape anisotropy. By assuming that the temperature dependence of the ratio of the elastic constants comes from the temperature dependence of the micellar shape anisotropy, the theoretical predictions are connected with experimental measurements… ▽ More The elastic constants of a discotic lyotropic nematic liquid crystal are calculated by means of a pseudo-molecular approach as functions of the micellar shape anisotropy. By assuming that the temperature dependence of the ratio of the elastic constants comes from the temperature dependence of the micellar shape anisotropy, the theoretical predictions are connected with experimental measurements for the ratio $K_{33}/K_{11}$. This procedure permits to determine, in a phenomenological way, the temperature dependence for the ratio of elastic constants and for the micellar shape anisotropy near the nematic-isotropic transition in agreement with the experimental data. △ Less

Submitted 5 October, 2004; originally announced October 2004.

Comments: 6 pages, 3 figures, published in Physical Review E

Journal ref: Physical Review E 60, 6195-6198 (1999)

Complex network study of Brazilian soccer players

Authors: Roberto N. Onody, Paulo A. de Castro

Abstract: Although being a very popular sport in many countries, soccer has not received much attention from the scientific community. In this paper, we study soccer from a complex network point of view. First, we consider a bipartite network with two kinds of vertices or nodes: the soccer players and the clubs. Real data were gathered from the 32 editions of the Brazilian soccer championship, in a total… ▽ More Although being a very popular sport in many countries, soccer has not received much attention from the scientific community. In this paper, we study soccer from a complex network point of view. First, we consider a bipartite network with two kinds of vertices or nodes: the soccer players and the clubs. Real data were gathered from the 32 editions of the Brazilian soccer championship, in a total of $13,411$ soccer players and 127 clubs. We find a lot of interesting and perhaps unsuspected results. The probability that a Brazilian soccer player has worked at $N$ clubs or played $M$ games shows an exponential decay while the probability that he has scored $G$ goals is power law. Now, if two soccer players who have worked at the same club at the same time are connected by an edge, then a new type of network arises (composed exclusively by soccer players nodes). Our analysis shows that for this network the degree distribution decays exponentially. We determine the exact values of the clustering coefficient, the assortativity coefficient and the average shortest path length and compare them with those of the Erdös-Rényi and configuration model. The time evolution of these quantities are calculated and the corresponding results discussed. △ Less

Submitted 1 October, 2004; v1 submitted 23 September, 2004; originally announced September 2004.

Comments: 4 pages, 6 figures, published in Physical Review E 70 037103 (2004)

Journal ref: Phys. Rev. E, 70, 037103 (2004)

Nonlinear Barabási-Albert Network

Authors: R. N. Onody, P. A. de Castro

Abstract: In recent years there has been considerable interest in the structure and dynamics of complex networks. One of the most studied networks is the linear Barabási-Albert model. Here we investigate the nonlinear Barabási-Albert growing network. In this model, a new node connects to a vertex of degree $k$ with a probability proportional to $k^α$ ($α$ real). Each vertex adds $m$ new edges to the netwo… ▽ More In recent years there has been considerable interest in the structure and dynamics of complex networks. One of the most studied networks is the linear Barabási-Albert model. Here we investigate the nonlinear Barabási-Albert growing network. In this model, a new node connects to a vertex of degree $k$ with a probability proportional to $k^α$ ($α$ real). Each vertex adds $m$ new edges to the network. We derive an analytic expression for the degree distribution $P(k)$ which is valid for all values of $m$ and $α\le 1$. In the limit $α\to -\infty$ the network is homogeneous. If $α> 1$ there is a gel phase with $m$ super-connected nodes. It is proposed a formula for the clustering coefficient which is in good agreement with numerical simulations. The assortativity coefficient $r$ is determined and it is shown that the nonlinear Barabási-Albert network is assortative (disassortative) if $α< 1$ ($α> 1$) and no assortative only when $α= 1$. In the limit $α\to -\infty$ the assortativity coefficient can be exactly calculated. We find $r=7/13$ when $m=2$. Finally, the minimum average shortest path length $l_{min}$ is numerically evaluated. Increasing the network size, $l_{min}$ diverges for $α\le 1$ and it is equal to 1 when $α> 1$. △ Less

Submitted 11 February, 2004; originally announced February 2004.

Comments: LATEX file, 7 pages, 5 ps figures, to appear in Physica A

Journal ref: Physica A 336 (2004) 491-502

Optimization and self-organized criticality in a magnetic system

Authors: R. N. Onody, P. A. de Castro

Abstract: We propose a kind of Bak-Sneppen dynamics as a general optimization technique to treat magnetic systems. The resulting dynamics shows self-organized criticality with power law scaling of the spatial and temporal correlations. An alternative method of the extremal optimization is also analyzed here. We provided a numerical confirmation that, for any possible value of its free parameter $τ$, the e… ▽ More We propose a kind of Bak-Sneppen dynamics as a general optimization technique to treat magnetic systems. The resulting dynamics shows self-organized criticality with power law scaling of the spatial and temporal correlations. An alternative method of the extremal optimization is also analyzed here. We provided a numerical confirmation that, for any possible value of its free parameter $τ$, the extremal optimization dynamics exhibits a non-critical behavior with an infinite spatial range and exponential decay of the avalanches. Using the chiral clock model as our test system, we compare the efficiency of the two dynamics with regard to their abilities to find the system's ground state. △ Less

Submitted 13 February, 2003; originally announced February 2003.

Comments: 5 pages, 4 figures, revtex4

Journal ref: International Journal of Modern Physics C vol. 14, n. 7 (2003) 911-916