-
Simulating optically-active spin defects with a quantum computer
Authors:
Jack S. Baker,
Pablo A. M. Casares,
Modjtaba Shokrian Zini,
Jaydeep Thik,
Debasish Banerjee,
Chen Ling,
Alain Delgado,
Juan Miguel Arrazola
Abstract:
There is a pressing need for more accurate computational simulations of the opto-electronic properties of defects in materials to aid in the development of quantum sensing platforms. In this work, we explore how quantum computers could be effectively utilized for this purpose. Specifically, we develop fault-tolerant quantum algorithms to simulate optically active defect states and their radiative…
▽ More
There is a pressing need for more accurate computational simulations of the opto-electronic properties of defects in materials to aid in the development of quantum sensing platforms. In this work, we explore how quantum computers could be effectively utilized for this purpose. Specifically, we develop fault-tolerant quantum algorithms to simulate optically active defect states and their radiative emission rates. We employ quantum defect embedding theory to translate the Hamiltonian of a defect-containing supercell into a smaller, effective Hamiltonian that accounts for dielectric screening effects. Our approach integrates block-encoding of the dipole operator with quantum phase estimation to selectively sample the optically active excited states that exhibit the largest dipole transition amplitudes. We also provide estimates of the quantum resources required to simulate a negatively-charged boron vacancy in a hexagonal boron nitride cluster. We conclude by offering a forward-looking perspective on the potential of quantum computers to enhance quantum sensor capabilities and identify specific scenarios where quantum computing can resolve problems traditionally challenging for classical computers.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Simulating X-ray absorption spectroscopy of battery materials on a quantum computer
Authors:
Stepan Fomichev,
Kasra Hejazi,
Ignacio Loaiza,
Modjtaba Shokrian Zini,
Alain Delgado,
Arne-Christian Voigt,
Jonathan E. Mueller,
Juan Miguel Arrazola
Abstract:
X-ray absorption spectroscopy is a crucial experimental technique for elucidating the mechanisms of structural degradation in battery materials. However, extracting information from the measured spectrum is challenging without high-quality simulations. In this work, we propose simulating near-edge X-ray absorption spectra as a promising application for quantum computing. It is attractive due to th…
▽ More
X-ray absorption spectroscopy is a crucial experimental technique for elucidating the mechanisms of structural degradation in battery materials. However, extracting information from the measured spectrum is challenging without high-quality simulations. In this work, we propose simulating near-edge X-ray absorption spectra as a promising application for quantum computing. It is attractive due to the ultralocal nature of X-ray absorption that significantly reduces the sizes of problems to be simulated, and because of the classical hardness of simulating spectra. We describe three quantum algorithms to compute the X-ray absorption spectrum and provide their asymptotic cost. One of these is a Monte-Carlo based time-domain algorithm, which is cost-friendly to early fault-tolerant quantum computers. We then apply the framework to an industrially relevant example, a CAS(22e,18o) active space for an O-Mn cluster in a Li-excess battery cathode, showing that practically useful simulations could be obtained with much fewer qubits and gates than ground-state energy estimation of the same material.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Initial state preparation for quantum chemistry on quantum computers
Authors:
Stepan Fomichev,
Kasra Hejazi,
Modjtaba Shokrian Zini,
Matthew Kiser,
Joana Fraxanet Morales,
Pablo Antonio Moreno Casares,
Alain Delgado,
Joonsuk Huh,
Arne-Christian Voigt,
Jonathan E. Mueller,
Juan Miguel Arrazola
Abstract:
Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we addre…
▽ More
Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we address the initial state preparation problem with an end-to-end algorithm that prepares and quantifies the quality of initial states, accomplishing the latter with a new metric -- the energy distribution. To be able to prepare more complicated initial states, we introduce an implementation technique for states in the form of a sum of Slater determinants that exhibits significantly better scaling than all prior approaches. We also propose low-precision quantum phase estimation (QPE) for further state quality refinement. The complete algorithm is capable of generating high-quality states for energy estimation, and is shown in select cases to lower the overall estimation cost by several orders of magnitude when compared with the best single product state ansatz. More broadly, the energy distribution picture suggests that the goal of QPE should be reinterpreted as generating improvements compared to the energy of the initial state and other classical estimates, which can still be achieved even if QPE does not project directly onto the ground state. Finally, we show how the energy distribution can help in identifying potential quantum advantage.
△ Less
Submitted 8 February, 2024; v1 submitted 27 October, 2023;
originally announced October 2023.
-
Quantum simulation of battery materials using ionic pseudopotentials
Authors:
Modjtaba Shokrian Zini,
Alain Delgado,
Roberto dos Reis,
Pablo A. M. Casares,
Jonathan E. Mueller,
Arne-Christian Voigt,
Juan Miguel Arrazola
Abstract:
Ionic pseudopotentials are widely used in classical simulations of materials to model the effective potential due to the nucleus and the core electrons. Modeling fewer electrons explicitly results in a reduction in the number of plane waves needed to accurately represent the states of a system. In this work, we introduce a quantum algorithm that uses pseudopotentials to reduce the cost of simulati…
▽ More
Ionic pseudopotentials are widely used in classical simulations of materials to model the effective potential due to the nucleus and the core electrons. Modeling fewer electrons explicitly results in a reduction in the number of plane waves needed to accurately represent the states of a system. In this work, we introduce a quantum algorithm that uses pseudopotentials to reduce the cost of simulating periodic materials on a quantum computer. We use a qubitization-based quantum phase estimation algorithm that employs a first-quantization representation of the Hamiltonian in a plane-wave basis. We address the challenge of incorporating the complexity of pseudopotentials into quantum simulations by developing highly-optimized compilation strategies for the qubitization of the Hamiltonian. This includes a linear combination of unitaries decomposition that leverages the form of separable pseudopotentials. Our strategies make use of quantum read-only memory subroutines as a more efficient alternative to quantum arithmetic. We estimate the computational cost of applying our algorithm to simulating lithium-excess cathode materials for batteries, where more accurate simulations are needed to inform strategies for gaining reversible access to the excess capacity they offer. We estimate the number of qubits and Toffoli gates required to perform sufficiently accurate simulations with our algorithm for three materials: lithium manganese oxide, lithium nickel-manganese oxide, and lithium manganese oxyfluoride. Our optimized compilation strategies result in a pseudopotential-based quantum algorithm with a total Toffoli cost four orders of magnitude lower than the previous state of the art for a fixed target accuracy.
△ Less
Submitted 4 July, 2023; v1 submitted 15 February, 2023;
originally announced February 2023.
-
Simulating key properties of lithium-ion batteries with a fault-tolerant quantum computer
Authors:
Alain Delgado,
Pablo A. M. Casares,
Roberto dos Reis,
Modjtaba Shokrian Zini,
Roberto Campos,
Norge Cruz-Hernández,
Arne-Christian Voigt,
Angus Lowe,
Soran Jahangiri,
M. A. Martin-Delgado,
Jonathan E. Mueller,
Juan Miguel Arrazola
Abstract:
There is a pressing need to develop new rechargeable battery technologies that can offer higher energy storage, faster charging, and lower costs. Despite the success of existing methods for the simulation of battery materials, they can sometimes fall short of delivering accurate and reliable results. Quantum computing has been discussed as an avenue to overcome these issues, but only limited work…
▽ More
There is a pressing need to develop new rechargeable battery technologies that can offer higher energy storage, faster charging, and lower costs. Despite the success of existing methods for the simulation of battery materials, they can sometimes fall short of delivering accurate and reliable results. Quantum computing has been discussed as an avenue to overcome these issues, but only limited work has been done to outline how they may impact battery simulations. In this work, we provide a detailed answer to the following question: how can a quantum computer be used to simulate key properties of a lithium-ion battery? Based on recently-introduced first-quantization techniques, we lay out an end-to-end quantum algorithm for calculating equilibrium cell voltages, ionic mobility, and thermal stability. These can be obtained from ground-state energies of materials, which is the core calculation executed by the quantum computer using qubitization-based quantum phase estimation. The algorithm includes explicit methods for preparing approximate ground states of periodic materials in first quantization. We bring these insights together to perform the first estimation of the resources required to implement a quantum algorithm for simulating a realistic cathode material, dilithium iron silicate.
△ Less
Submitted 6 February, 2023; v1 submitted 25 April, 2022;
originally announced April 2022.
-
Pattern of Zeros
Authors:
Modjtaba Shokrian Zini,
Zhenghan Wang,
Xiao-Gang Wen
Abstract:
In this paper, we provide a set of definitions upon which one can prove in a rigorous way most of the main results achieved in the pattern of zeros classification of fractional quantum Hall states.
In this paper, we provide a set of definitions upon which one can prove in a rigorous way most of the main results achieved in the pattern of zeros classification of fractional quantum Hall states.
△ Less
Submitted 16 November, 2017;
originally announced November 2017.
