-
Limiting performance of graphene bilayer sub-terahertz detectors at large induced band gap
Authors:
Elena I. Titova,
Mikhail A. Kashchenko,
Andrey V. Miakonkikh,
Alexander D. Morozov,
Ivan K. Domaratskiy,
Sergey S. Zhukov,
Vladimir V. Rumyantsev,
Sergey V. Morozov,
Kostya S. Novoselov,
Denis A. Bandurin,
Dmitry A. Svintsov
Abstract:
Electrically induced $p-n$ junctions in graphene bilayer (GBL) have shown superior performance for detection of sub-THz radiation at cryogenic temperatures, especially upon electrical induction of the band gap $E_g$. Still, the upper limits of responsivity and noise equivalent power (NEP) at very large $E_g$ remained unknown. Here, we study the cryogenic performance of GBL detectors at $f=0.13$ TH…
▽ More
Electrically induced $p-n$ junctions in graphene bilayer (GBL) have shown superior performance for detection of sub-THz radiation at cryogenic temperatures, especially upon electrical induction of the band gap $E_g$. Still, the upper limits of responsivity and noise equivalent power (NEP) at very large $E_g$ remained unknown. Here, we study the cryogenic performance of GBL detectors at $f=0.13$ THz by inducing gaps up to $E_g \approx 90$ meV, a value close to the limits observed in recent transport experiments. High value of the gap is achieved by using high-$κ$ bottom hafnium dioxide gate dielectric. The voltage responsivity, current responsivity and NEP optimized with respect to doping do not demonstrate saturation with gap induction up to its maximum values. The NEP demonstrates an order-of-magnitude drop from $\sim450$ fW/Hz$^{1/2}$ in the gapless state to $\sim30$ fW/Hz$^{1/2}$ at the largest gap. At largest induced band gaps, plasmonic oscillations of responsivity become visible and important for optimization of sub-THz response.
△ Less
Submitted 9 December, 2024;
originally announced December 2024.
-
Zero-bias photodetection in 2d materials via geometric design of contacts
Authors:
Valentin A. Semkin,
Aleksandr V. Shabanov,
Dmitry A. Mylnikov,
Mikhail A. Kashchenko,
Ivan K. Domaratskiy,
Sergey S. Zhukov,
Dmitry A. Svintsov
Abstract:
Structural or crystal asymmetry are necessary conditions for emergence of zero-bias photocurrent in light detectors. Structural asymmetry has been typically achieved via $p-n$ doping being a technologically complex process. Here, we propose an alternative approach to achieve zero-bias photocurrent in 2d material flakes exploiting the geometrical non-equivalence of source and drain contacts. As a p…
▽ More
Structural or crystal asymmetry are necessary conditions for emergence of zero-bias photocurrent in light detectors. Structural asymmetry has been typically achieved via $p-n$ doping being a technologically complex process. Here, we propose an alternative approach to achieve zero-bias photocurrent in 2d material flakes exploiting the geometrical non-equivalence of source and drain contacts. As a prototypical example, we equip a square-shaped flake of PdSe$_2$ with mutually orthogonal metal leads. Upon uniform illumination with linearly-polarized light, the device demonstrates non-zero photocurrent which flips its sign upon 90$^\circ$ polarization rotation. The origin of zero-bias photocurrent lies in polarization-dependent lightning-rod effect. It enhances the electromagnetic field at one contact from the orthogonal pair, and selectively activates the internal photoeffect at the respective metal-PdSe$_2$ Schottky junction. The proposed technology of contact engineering can be extended to arbitrary 2d materials and detection of both polarized and natural light.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Ultralow-noise terahertz detection by p-n junctions in gapped bilayer graphene
Authors:
Elena Titova,
Dmitry Mylnikov,
Mikhail Kashchenko,
Sergey Zhukov,
Kirill Dzhikirba,
Kostya Novoselov,
Denis Bandurin,
Georgy Alymov,
Dmitry Svintsov
Abstract:
Graphene shows a strong promise for detection of terahertz (THz) radiation due to its high carrier mobility, compatibility with on-chip waveguides and transistors, and small heat capacitance. At the same time, weak reaction of graphene's physical properties on the detected radiation can be traced down to the absence of band gap. Here, we study the effect of electrically-induced band gap on THz det…
▽ More
Graphene shows a strong promise for detection of terahertz (THz) radiation due to its high carrier mobility, compatibility with on-chip waveguides and transistors, and small heat capacitance. At the same time, weak reaction of graphene's physical properties on the detected radiation can be traced down to the absence of band gap. Here, we study the effect of electrically-induced band gap on THz detection in graphene bilayer with split-gate p-n junction. We show that gap induction leads to simultaneous increase in current and voltage responsivities. At operating temperatures of ~25 K, the responsivity at 20 meV band gap is from 3 to 20 times larger than that in the gapless state. The maximum voltage responsivity of our devices at 0.13 THz illumination exceeds 50 kV/W, while the noise equivalent power falls down to 36 fW/Hz^0.5. These values set new records for semiconductor-based cryogenic terahertz detectors, and pave the way for efficient and fast terahertz detection.
△ Less
Submitted 10 December, 2022;
originally announced December 2022.
-
Terahertz photoconductivity in bilayer graphene transistors: evidence for tunneling at gate-induced junctions
Authors:
Dmitry Mylnikov,
Elena I. Titova,
Mikhail A. Kashchenko,
Ilya V. Safonov,
Sergey S. Zhukov,
Valentin A. Semkin,
Kostya S. Novoselov,
Denis A. Bandurin,
Dmitry A. Svintsov
Abstract:
Photoconductivity of novel materials is the key property of interest for design of photodetectors, optical modulators, and switches. Despite the photoconductivity of most novel 2d materials has been studied both theoretically and experimentally, the same is not true for 2d p-n junctions that are necessary blocks of most electronic devices. Here, we study the sub-terahertz photocoductivity of gappe…
▽ More
Photoconductivity of novel materials is the key property of interest for design of photodetectors, optical modulators, and switches. Despite the photoconductivity of most novel 2d materials has been studied both theoretically and experimentally, the same is not true for 2d p-n junctions that are necessary blocks of most electronic devices. Here, we study the sub-terahertz photocoductivity of gapped bilayer graphene with electrically-induced p-n junctions. We find a strong positive contribution from junctions to resistance, temperature resistance coefficient and photo-resistivity at cryogenic temperatures T ~ 20 K. The contribution to these quantities from junctions exceeds strongly the bulk values at uniform channel doping even at small band gaps ~ 10 meV. We further show that positive junction photoresistance is a hallmark of interband tunneling, and not of intra-band thermionic conduction. Our results point to the possibility of creating various interband tunneling devices based on bilayer graphene, including steep-switching transistors and selective sensors.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Ultrafast opto-mechanical terahertz modulators based on stretchable carbon nanotube thin films
Authors:
Maksim I. Paukov,
Vladimir V. Starchenko,
Dmitry V. Krasnikov,
Gennady A. Komandin,
Yuriy G. Gladush,
Sergey S. Zhukov,
Boris P. Gorshunov,
Albert G. Nasibulin,
Aleksey V. Arsenin,
Valentyn S. Volkov,
Maria G. Burdanova
Abstract:
For terahertz (THz) wave applications, tunable and rapid modulation is highly required. When studied by means of optical pump-terahertz probe spectroscopy, single-walled carbon nanotubes (SWCNTs) thin films demonstrated ultrafast carrier recombination lifetimes with a high relative change in the signal under optical excitation, making them promising candidates for high-speed modulators. Here, comb…
▽ More
For terahertz (THz) wave applications, tunable and rapid modulation is highly required. When studied by means of optical pump-terahertz probe spectroscopy, single-walled carbon nanotubes (SWCNTs) thin films demonstrated ultrafast carrier recombination lifetimes with a high relative change in the signal under optical excitation, making them promising candidates for high-speed modulators. Here, combination of SWCNTthin films and stretchable substrates facilitated studies of the SWCNT mechanical properties under strain,and enabled the development of a new type of an opto-mechanical modulator. By applying a certain strain to the SWCNT films, the effective sheet conductance and therefore modulation depth can be fine-tuned to optimize the designed modulator. Modulators exhibited a photoconductivity change of 3-4 orders of magnitude under the strain due to the structural modification in the SWCNT network. Stretching was used to control the THz signal with a modulation depth of around 100 % without strain and 65 % at a high strainoperation of 40 %. The sensitivity of modulators to beam polarisation is also shown, which might also come in handy for the design of a stretchable polariser. Our results give a fundamental grounding for the design of high-sensitivity stretchable devices based on SWCNT films.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Dynamic scaling properties of multistep polarization response in ferroelectrics
Authors:
Yuri A. Genenko,
Sergey Zhukov,
Maohua Zhang,
Ke Wang,
Jurij Koruza
Abstract:
Ferroelectrics are multifunctional smart materials finding applications in sensor technology, micromechanical actuation, digital information storage etc. Their most fundamental property is the ability of polarization switching under applied electric field. In particular, understanding of switching kinetics is essential for digital information storage. In this regard, scaling properties of the temp…
▽ More
Ferroelectrics are multifunctional smart materials finding applications in sensor technology, micromechanical actuation, digital information storage etc. Their most fundamental property is the ability of polarization switching under applied electric field. In particular, understanding of switching kinetics is essential for digital information storage. In this regard, scaling properties of the temporal polarization response are well-known for 180°-switching processes in ferroelectrics characterized by a unique field-dependent local switching time. Unexpectedly, these properties were now observed in multiaxial polycrystalline ferroelectrics, exhibiting a number of parallel and sequential non-180°-switching processes with distinct switching times. This behaviour can be explained by a combination of the multistep stochastic mechanism and the inhomogeneous field mechanism models of polarization reversal. Scaling properties are predicted for polycrystalline ferroelectrics of tetragonal, rhombohedral and orthorhombic symmetries and exemplarily demonstrated by measurements of polarization kinetics in (K,Na)NbO3-based ferroelectric ceramic over a timescale of 7 orders of magnitude. Dynamic scaling properties allow insight into the microscopic switching mechanisms, on the one hand, and into statistical material characteristics, on the other hand, providing thereby the description of temporal polarization with high accuracy. The gained deeper insight into the mechanisms of multistep polarization switching is crucial for future ultrafast and multilevel digital information storage.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
Polarization-resolving graphene-based mid-infrared detector
Authors:
Valentin Semkin,
Dmitry Mylnikov,
Elena Titova,
Sergey Zhukov,
Dmitry Svintsov
Abstract:
The ability to resolve the polarization of light with on-chip devices represents an urgent problem in optoelectronics. The detectors with polarization resolution demonstrated so far mostly require multiple oriented detectors or movable external polarizers. Here, we experimentally demonstrate the feasibility to resolve the polarization of mid-infrared light with a single chemical-vapor-deposited gr…
▽ More
The ability to resolve the polarization of light with on-chip devices represents an urgent problem in optoelectronics. The detectors with polarization resolution demonstrated so far mostly require multiple oriented detectors or movable external polarizers. Here, we experimentally demonstrate the feasibility to resolve the polarization of mid-infrared light with a single chemical-vapor-deposited graphene-channel device with dissimilar metal contacts. This possibility stems from an unusual dependence of photoresponse at graphene-metal junctions on gate voltage and polarization angle. Namely, there exist certain gate voltages providing the polarization-insensitive signal; operation at these voltages can be used for power calibration of the detector. At other gate voltages, the detector features very strong polarization sensitivity, with the ratio of signals for two orthogonal polarizations reaching ~10. Operation at these voltages can provide information about polarization angles, after the power calibration. We show that such unusual gate- and polarization-dependence of photosignal can appear upon competition of isotropic and anisotropic photovoltage generation pathways and discuss the possible physical candidates.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Local ultra-densification of single-walled carbon nanotube films: modeling and experiment
Authors:
Artem K. Grebenko,
Grigorii Drozdov,
Yuriy G. Gladush,
Igor Ostanin,
Sergey S. Zhukov,
Aleksandr V. Melentyev,
Eldar M. Khabushev,
Alexey P. Tsapenko,
Dmitry V. Krasnikov,
Boris Afinogenov,
Alexei G. Temiryazev,
Viacheslav V. Dremov,
Traian Dumitricã,
Mengjun Li,
Hussein Hijazi,
Vitaly Podzorov,
Leonard C. Feldman,
Albert G. Nasibulin
Abstract:
Fabrication of nanostructured metasurfaces poses a significant technological and fundamental challenge. Despite developing novel systems that support reversible elongation and distortion, their nanoscale patterning and control of optical properties remain an open problem. Herein we report the atomic force microscope lithography (AFML) application for nanoscale patterning of single-walled carbon na…
▽ More
Fabrication of nanostructured metasurfaces poses a significant technological and fundamental challenge. Despite developing novel systems that support reversible elongation and distortion, their nanoscale patterning and control of optical properties remain an open problem. Herein we report the atomic force microscope lithography (AFML) application for nanoscale patterning of single-walled carbon nanotube films and the associated reflection coefficient tuning. We present models of bundling reorganization, formed-pattern stability, and energy distribution describing mechanical behavior with mesoscopic distinct element method (MDEM). All observed and calculated phenomena support each other and present a platform for developing AFML patterned optical devices using meshy nanostructured matter.
△ Less
Submitted 12 March, 2022;
originally announced March 2022.
-
Infrared spectroscopy of hydration-controlled eumelanin films suggests the presence of the Zundel cation
Authors:
Zakhar V. Bedran,
Sergey S. Zhukov,
Pavel A. Abramov,
Ilya O. Tyurenkov,
Boris P. Gorshunov,
A. Bernardus Mostert,
Konstantin A. Motovilov
Abstract:
Eumelanin is a widespread biomacromolecule pigment in the biosphere and is intensively tested in numerous bioelectronics and energetic applications. Many of these applications depend on eumelanin's ability to conduct proton current at various levels of hydration. The origin of this behaviour is connected with a comproportionation reaction between oxidized and reduced monomer moieties and water. Ho…
▽ More
Eumelanin is a widespread biomacromolecule pigment in the biosphere and is intensively tested in numerous bioelectronics and energetic applications. Many of these applications depend on eumelanin's ability to conduct proton current at various levels of hydration. The origin of this behaviour is connected with a comproportionation reaction between oxidized and reduced monomer moieties and water. However, neither this reaction nor the formation of the aqueous proton species have ever been directly observed. Presented here is a hydration dependent FTIR spectroscopic study on eumelanin, which allows for the first time to track the comproportionation reaction via the gradual decrease of the carbonyl group concentration (1725 $cm^{-1}$ band) versus hydration. Furthermore, we detect two types of interfacial water (3253 $cm^{-1}$ and 3473 $cm^{-1}$ bands). Finally, the feature detected at the 3600 $cm^{-1}$ band is assigned to the formation of the Zundel cation, $H_5O_2^+$, an observation and suggestion not previously made. We suggests, due to the behaviour of the hydration dependent feature at 3600 $cm^{-1}$ that the formation of the $H_5O_2^+$ cation potentially functions as a trap for mobile proton species, partially explaining the complex hydration dependent conductivity of eumelanin.
△ Less
Submitted 15 May, 2021;
originally announced May 2021.
-
Tight-binding terahertz plasmons in chemical vapor deposited graphene
Authors:
Andrey Bylinkin,
Elena Titova,
Vitaly Mikheev,
Elena Zhukova,
Sergey Zhukov,
Mikhail Belyanchikov,
Mikhail Kashchenko,
Andrey Miakonkikh,
Dmitry Svintsov
Abstract:
Transistor structures comprising graphene and sub-wavelength metal gratings hold a great promise for plasmon-enhanced terahertz detection. Despite considerable theoretical effort, little experimental evidence for terahertz plasmons in such structures was found so far. Here, we report an experimental study of plasmons in graphene-insulator-grating structures using Fourier transform spectroscopy in…
▽ More
Transistor structures comprising graphene and sub-wavelength metal gratings hold a great promise for plasmon-enhanced terahertz detection. Despite considerable theoretical effort, little experimental evidence for terahertz plasmons in such structures was found so far. Here, we report an experimental study of plasmons in graphene-insulator-grating structures using Fourier transform spectroscopy in 5-10 THz range. The plasmon resonance is clearly visible above the Drude absorption background even in chemical vapor deposited (CVD) graphene with low carrier mobility $\sim 10^3$ cm$^2$/(V s). We argue that plasmon lifetime is weakly sensistive to scattering by grain boundaries and macoscopic defects which limits the mobility of CVD samples. Upon placing the grating in close proximity to graphene, the plasmon field becomes tightly bound below the metal stripes, while the resonant frequency is determined by the stripe width but not by grating period. Our results open the prospects of large-area commercially available graphene for resonant terahertz detectors.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Resonant Terahertz Detection Using Graphene Plasmons
Authors:
D. A. Bandurin,
D. Svintsov,
I. Gayduchenko,
S. G. Xu,
A. Principi,
M. Moskotin,
I. Tretyakov,
D. Yagodkin,
S. Zhukov,
T. Taniguchi,
K. Watanabe,
I. V. Grigorieva,
M. Polini,
G. Goltsman,
A. K. Geim,
G. Fedorov
Abstract:
Plasmons, collective oscillations of electron systems, can efficiently couple light and electric current, and thus can be used to create sub-wavelength photodetectors, radiation mixers, and on-chip spectrometers. Despite considerable effort, it has proven challenging to implement plasmonic devices operating at terahertz frequencies. The material capable to meet this challenge is graphene as it sup…
▽ More
Plasmons, collective oscillations of electron systems, can efficiently couple light and electric current, and thus can be used to create sub-wavelength photodetectors, radiation mixers, and on-chip spectrometers. Despite considerable effort, it has proven challenging to implement plasmonic devices operating at terahertz frequencies. The material capable to meet this challenge is graphene as it supports long-lived electrically-tunable plasmons. Here we demonstrate plasmon-assisted resonant detection of terahertz radiation by antenna-coupled graphene transistors that act as both plasmonic Fabry-Perot cavities and rectifying elements. By varying the plasmon velocity using gate voltage, we tune our detectors between multiple resonant modes and exploit this functionality to measure plasmon wavelength and lifetime in bilayer graphene as well as to probe collective modes in its moiré minibands. Our devices offer a convenient tool for further plasmonic research that is often exceedingly difficult under non-ambient conditions (e.g. cryogenic temperatures and strong magnetic fields) and promise a viable route for various photonic applications.
△ Less
Submitted 27 November, 2018; v1 submitted 12 July, 2018;
originally announced July 2018.
-
Fatigue effect on polarization switching dynamics in polycrystalline bulk ferroelectrics
Authors:
S. Zhukov,
J. Glaum,
H. Kungl,
E. Sapper,
R. Dittmer,
Y. A. Genenko,
H. von Seggern
Abstract:
Statistical distribution of switching times is a key information necessary to describe the dynamic response of a polycrystalline bulk ferroelectric to an applied electric field. The Inhomogeneous Field Mechanism (IFM) model offers a useful tool which allows extraction of this information from polarization switching measurements over a large time window. In this paper, the model was further develop…
▽ More
Statistical distribution of switching times is a key information necessary to describe the dynamic response of a polycrystalline bulk ferroelectric to an applied electric field. The Inhomogeneous Field Mechanism (IFM) model offers a useful tool which allows extraction of this information from polarization switching measurements over a large time window. In this paper, the model was further developed to account for the presence of non-switchable regions in fatigued materials. Application of the IFM- analysis to bipolar electric cycling induced fatigue process of various lead-based and lead-free ferroelectric ceramics reveals different scenarios of property degradation. Insight is gained into different underlying fatigue mechanisms inherent to the investigated systems.
△ Less
Submitted 11 July, 2016; v1 submitted 24 May, 2016;
originally announced May 2016.
-
Two-band BCS superconductivity in Ba(Fe0.9Co0.1)2As2
Authors:
E. G. Maksimov,
A. E. Karakozov,
B. P. Gorshunov,
V. S. Nozdrin,
A. A. Voronkov,
E. S. Zhukova,
S. S. Zhukov,
Dan Wu,
M. Dressel,
S. Haindl,
K. Iida,
B. Holzapfel
Abstract:
The conductivity and permittivity optical spectra of iron-pnictide Ba(Fe0.9Co0.1)2As2 film (Tc=20 K) are analyzed. In the superconducting state, at all temperatures up to Tc the temperature dependences of the magnetic field penetration depth and of the superconducting condensate density are well described within the generalized two-band BCS model with intraband and interband pairing interactions c…
▽ More
The conductivity and permittivity optical spectra of iron-pnictide Ba(Fe0.9Co0.1)2As2 film (Tc=20 K) are analyzed. In the superconducting state, at all temperatures up to Tc the temperature dependences of the magnetic field penetration depth and of the superconducting condensate density are well described within the generalized two-band BCS model with intraband and interband pairing interactions considered. It is shown that the smaller superconducting energy gap 2Δ = 3.7 meV develops in the electronic subsystem while the larger gap 2Δ >= 7 meV opens in the hole subsystem. The normal state parameters (plasma frequencies and scattering rates) of electron and hole conduction bands are determined. At all temperatures the obtained data are consistent with the results of electronic photoemission experiments on Ba(Fe1-x Cox)2As2.
△ Less
Submitted 1 September, 2010; v1 submitted 20 August, 2010;
originally announced August 2010.