Showing 1–37 of 37 results for author: Zheng, K

Large unconventional anomalous Hall effect far above room temperature in epitaxial Fe$_3$Ga$_4$ films

Authors: Jing Meng, Huali Yang, Yu Shen, Kun Zheng, Hongru Wang, Yuhao Wang, Keqi Xia, Bocheng Yu, Xiaoyan Zhu, Baiqing Lv, Yaobo Huang, Jie Ma, Dariusz Jakub Gawryluk, Toni Shiroka, Zhenzhong Yang, Yang Xu, Qingfeng Zhan, Tian Shang

Abstract: Noncoplanar spin textures usually exhibit a finite scalar spin chirality (SSC) that can generate effective magnetic fields and lead to additional contributions to the Hall effect, namely topological or unconventional anomalous Hall effect (UAHE). Unlike topological spin textures (e.g., magnetic skyrmions), materials that exhibit fluctuation-driven SSC and UAHE are rare. So far, their realization h… ▽ More Noncoplanar spin textures usually exhibit a finite scalar spin chirality (SSC) that can generate effective magnetic fields and lead to additional contributions to the Hall effect, namely topological or unconventional anomalous Hall effect (UAHE). Unlike topological spin textures (e.g., magnetic skyrmions), materials that exhibit fluctuation-driven SSC and UAHE are rare. So far, their realization has been limited to either low temperatures or high magnetic fields, both of which are unfavorable for practical applications. Identifying new materials that exhibit UAHE in a low magnetic field at room temperature is therefore essential. Here, we report the discovery of a large UAHE far above room temperature in epitaxial Fe$_3$Ga$_4$ films, where the fluctuation-driven SSC stems from the field-induced transverse-conical-spiral phase. Considering their epitaxial nature and the large UAHE stabilized at room temperature in a low magnetic field, Fe$_3$Ga$_4$ films represent an exciting, albeit rare, case of a promising candidate material for spintronic devices. △ Less

Submitted 10 July, 2025; originally announced July 2025.

Comments: 11 pages, 5 figrues; accepted version for the npj Quantum Materials

Surface Morphology Assisted Trapping of Strongly Coupled Electron-on-Neon Charge States

Authors: Kaiwen Zheng, Xingrui Song, Kater W. Murch

Abstract: Single electrons confined to a free neon surface and manipulated through the circuit quantum electrodynamics (circuit QED) architecture is a promising novel quantum computing platform. Understanding the exact physical nature of the electron-on-neon (eNe) charge states is important for realizing this platform's potential for quantum technologies. We investigate how resonator trench depth and substr… ▽ More Single electrons confined to a free neon surface and manipulated through the circuit quantum electrodynamics (circuit QED) architecture is a promising novel quantum computing platform. Understanding the exact physical nature of the electron-on-neon (eNe) charge states is important for realizing this platform's potential for quantum technologies. We investigate how resonator trench depth and substrate surface properties influence the formation of eNe charge states and their coupling to microwave resonators. Through experimental observation supported by modeling, we find that shallow-depth etching of the resonator features maximizes coupling strength. By comparing the trapping statistics and surface morphology of devices with altered trench roughness, our work reveals the role of fabrication-induced surface features in the formation of strongly coupled eNe states. △ Less

Submitted 3 March, 2025; originally announced March 2025.

Comments: 7 pages, 6 figures

Sub-micron Circuit Fabrication on Diamond Anvils for Mesoscopic High-Pressure Experiments

Authors: Z. R. Rehfuss, K. Zheng, S. L. Gould, K. W. Murch, S. Ran

Abstract: We present a novel fabrication procedure to produce high-quality lift-off structures on diamond anvils extending from the culet down to the slanted facets. Feature sizes down to 500 nm are achieved through the use of a bi-layer resist stack and electron beam lithography. Device structures with strong adhesion to the diamond surface and high abrasion resistance are realized by optimizing the surfac… ▽ More We present a novel fabrication procedure to produce high-quality lift-off structures on diamond anvils extending from the culet down to the slanted facets. Feature sizes down to 500 nm are achieved through the use of a bi-layer resist stack and electron beam lithography. Device structures with strong adhesion to the diamond surface and high abrasion resistance are realized by optimizing the surface treatment. To benchmark our process, we fabricate a multi-lead tungsten circuit to measure changes of the superconducting transition temperature of zirconium across the structural phase transition at $\sim$30 GPa; showing a 4-fold jump of the critical temperature. Our process is easily reproducible in most traditional academic and industrial cleanroom facilities. This work paves the way for complex and high-precision fabrication and measurements inside diamond anvil cells and on other faceted crystalline samples. △ Less

Submitted 5 April, 2025; v1 submitted 6 January, 2025; originally announced January 2025.

Comments: 6 pages, 3 figures

On the Hidden Transient Interphase in Metal Anodes: Dynamic Precipitation Controls Electrochemical Interfaces in Batteries

Authors: Stephen T. Fuller, J. -X. Kent Zheng

Abstract: The Solid-Electrolyte Interphase, SEI, formed on a battery electrode has been a central area of research for decades. This thin, complex layer profoundly impacts the electrochemical deposition morphology and stability of the metal in battery anodes. Departing from conventional approaches, we investigate metal dissolution, the reverse reaction of deposition, in battery environments using a state-of… ▽ More The Solid-Electrolyte Interphase, SEI, formed on a battery electrode has been a central area of research for decades. This thin, complex layer profoundly impacts the electrochemical deposition morphology and stability of the metal in battery anodes. Departing from conventional approaches, we investigate metal dissolution, the reverse reaction of deposition, in battery environments using a state-of-the-art electroanalytical system combining a rotating-disk electrode and in-operando visualization. Our key finding is the presence of a Transient Solid-Electrolyte Interphase, T-SEI, that forms during fast discharging at high dissolution rates. We attribute T-SEI formation to transient local supersaturation and resultant electrolyte salt deposition. The T-SEI fundamentally alters the dissolution kinetics at the electrochemical interface, leading to a self-limiting morphological evolution and eventually yielding a flat, clean surface. Unlike a classical SEI formed due to electrolyte decomposition, the T-SEI is fully relaxable upon removal of the enforced dissolution current. The formation of T-SEI, surprisingly, plays a critical role in the subsequent electrodeposition. When the metal is redeposited on a fully relaxed T-SEI surface, the morphology is remarkably different from that deposited on pristine or low-rate discharged metal electrodes. Electron backscatter diffraction analysis suggests the deposition occurs via growth of the original grains. This is in stark contrast to the isolated, particulate nuclei seen on standard metal electrodes without T-SEI formation. Our findings provide important insights into the electrochemical kinetics at the metal-electrolyte interface, particularly in concentrated or water-in-salt electrolytes that are close to the salt saturation limit. The results suggest a new dimension for electrochemical engineering in batteries. △ Less

Submitted 18 March, 2025; v1 submitted 23 November, 2024; originally announced November 2024.

A Novel Energy-Efficient Salicide-Enhanced Tunnel Device Technology Based on 300mm Foundry Platform Towards AIoT Applications

Authors: Kaifeng Wang, Qianqian Huang, Yongqin Wu, Ye Ren, Renjie Wei, Zhixuan Wang, Libo Yang, Fangxing Zhang, Kexing Geng, Yiqing Li, Mengxuan Yang, Jin Luo, Ying Liu, Kai Zheng, Jin Kang, Le Ye, Lining Zhang, Weihai Bu, Ru Huang

Abstract: This work demonstrates a novel energy-efficient tunnel FET (TFET)-CMOS hybrid foundry platform for ultralow-power AIoT applications. By utilizing the proposed monolithic integration process, the novel complementary n and p-type Si TFET technology with dopant segregated source junction and self-aligned drain underlap design is successfully integrated into a 300mm CMOS baseline process without CMOS… ▽ More This work demonstrates a novel energy-efficient tunnel FET (TFET)-CMOS hybrid foundry platform for ultralow-power AIoT applications. By utilizing the proposed monolithic integration process, the novel complementary n and p-type Si TFET technology with dopant segregated source junction and self-aligned drain underlap design is successfully integrated into a 300mm CMOS baseline process without CMOS performance penalty and any new materials, experimentally demonstrating the large Ion and record high Ion/Ioff ratio of 10^7 among TFETs by industry-manufacturers. The device performance and variability are also co-optimized for high-volume production. Further circuit-level implementations are presented based on the calibrated compact model. The proposed TFET-CMOS hybrid logic and SRAM topologies show significant energy efficiency improvement with comparable operation speed compared with standard CMOS circuits, indicating its great potential for power-constraint AIoT applications. △ Less

Submitted 16 October, 2024; originally announced October 2024.

High-areal-capacity Na-ion battery electrode with uncompromised energy and power densities by simultaneous electrospinning-spraying fabrication

Authors: Mengzheng Ouyang, Zhenyu Guo, Luis E Salinas-Farran, Yan Zhao, Siyu Zhao, Kaitian Zheng, Hao Zhang, Mengnan Wang, Guangdong Li, Feiran Li, Xinhua Liu, Shichun Yang, Fei Xie, Paul R. Shearing, Maria-Magdalena Titirici, Nigel P. Brandon

Abstract: Sodium-ion batteries (SIBs) are cost-effective alternatives to lithium-ion batteries (LIBs), but their low energy density remains a challenge. Current electrode designs fail to simultaneously achieve high areal loading, high active content, and superior performance. In response, this work introduces an ideal electrode structure, featuring a continuous conductive network with active particles secur… ▽ More Sodium-ion batteries (SIBs) are cost-effective alternatives to lithium-ion batteries (LIBs), but their low energy density remains a challenge. Current electrode designs fail to simultaneously achieve high areal loading, high active content, and superior performance. In response, this work introduces an ideal electrode structure, featuring a continuous conductive network with active particles securely trapped in the absence of binder, fabricated using a universal technique that combines electrospinning and electrospraying (co-ESP). We found that the particle size must be larger than the network's pores for optimised performance, an aspect overlooked in previous research. The free-standing co-ESP Na2V3(PO4)3 (NVP) cathodes demonstrated state-of-the-art 296 mg cm-2 areal loading with 97.5 wt.% active content, as well as remarkable rate-performance and cycling stability. Co-ESP full cells showed uncompromised energy and power densities (231.6 Wh kg-1 and 7152.6 W kg-1), leading among reported SIBs with industry-relevant areal loadings. The structural merit is analysed using multi-scale X-ray computed tomography, providing valuable design insights.Finally, the superior performance is validated in the pouch cells, highlighting the electrode's scalability and potential for commercial application. △ Less

Submitted 21 August, 2024; originally announced August 2024.

Comments: Main manuscript 25 pages, 5 figures. Supplementary 47 pages, including 35 figures and 11 tables

Enhanced torque efficiency in ferromagnetic multilayers by introducing naturally oxidized Cu

Authors: Kun Zheng, Cuimei Cao, Yingying Lu, Jing Meng, Junpeng Pan, Zhenjie Zhao, Yang Xu, Tian Shang, Qingfeng Zhan

Abstract: Spin-orbit torque (SOT) in the heavy elements with a large spin-orbit coupling (SOC) has been frequently used to manipulate the magnetic states in spintronic devices. Recent theoretical works have predicted that the surface oxidized light elements with a negligible SOC can yield a sizable orbital torque (OT), which plays an important role in switching the magnetization. Here, we report anomalous-H… ▽ More Spin-orbit torque (SOT) in the heavy elements with a large spin-orbit coupling (SOC) has been frequently used to manipulate the magnetic states in spintronic devices. Recent theoretical works have predicted that the surface oxidized light elements with a negligible SOC can yield a sizable orbital torque (OT), which plays an important role in switching the magnetization. Here, we report anomalous-Hall-resistance and harmonic-Hall-voltage measurements on perpendicularly magnetized Ta/Cu/[Ni/Co]$_5$/Cu-CuO$_x$ multilayers. Both torque efficiency and spin-Hall angle of these multilayers are largely enhanced by introducing a naturally oxidized Cu-CuO$_x$ layer, where the SOC is negligible. Such an enhancement is mainly due to the collaborative driven of the SOT from the Ta layer and the OT from the Cu/CuO$_x$ interface, and can be tuned by controlling the thickness of Cu-CuO$_x$ layer. Compared to the Cu-CuO$_x$-free multilayers, the maximum torque efficiency and spin-Hall angle were enhanced by a factor of ten, larger than most of the reported values in the other heterostructures. △ Less

Submitted 27 April, 2024; originally announced April 2024.

Comments: 10 pages, 5 figures, accepted by Appl. Phys. Lett

Journal ref: Appl. Phys. Lett. 124, 192408 (2024)

Revealing a 3D Fermi Surface Pocket and Electron-Hole Tunneling in UTe$_{2}$ with Quantum Oscillations

Authors: Christopher Broyles, Zack Rehfuss, Hasan Siddiquee, Jiahui Althena Zhu, Kaiwen Zheng, Martin Nikolo, David Graf, John Singleton, Sheng Ran

Abstract: Spin triplet superconductor UTe$_{2}$ is widely believed to host a quasi-two-dimensional Fermi surface, revealed by first principal calculations, photoemission and quantum oscillation measurements. An outstanding question still remains as to the existence of a three-dimensional Fermi surface pocket, which is crucial for our understanding of the exotic superconducting and topological properties of… ▽ More Spin triplet superconductor UTe$_{2}$ is widely believed to host a quasi-two-dimensional Fermi surface, revealed by first principal calculations, photoemission and quantum oscillation measurements. An outstanding question still remains as to the existence of a three-dimensional Fermi surface pocket, which is crucial for our understanding of the exotic superconducting and topological properties of UTe$_{2}$. This 3D Fermi surface pocket appears in various theoretical models with different physics origins but has not been detected experimentally. Here for the first time, we provide concrete evidence for a relatively isotropic, small Fermi surface pocket of UTe$_{2}$ via quantum oscillation measurements. In addition, we observed high frequency quantum oscillations corresponding to electron-hole tunneling between adjacent electron and hole pockets. The coexistence of 2D and 3D Fermi surface pockets, as well as the breakdown orbits, provides a test bed for theoretical models and aid the realization of a unified understanding of superconducting state of UTe$_{2}$ from the first-principles approach. △ Less

Submitted 23 July, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Moss-like growth of metal electrodes: On the role of competing faradaic reactions and fast-charging

Authors: J. X. Kent Zheng, Jiefu Yin, Tian Tang, Lynden A. Archer

Abstract: Uncontrolled crystal growth during electroreduction of reactive metals in liquid electrolytes produces porous, low-density, mossy metal deposits that grow primarily along the surface normal vector to a planar electrode substrate. The moss-like deposits are fragile and cause premature failure of batteries by chemical, physical, and mechanical pathways. Here we use electroanalytical Rotating-Disk El… ▽ More Uncontrolled crystal growth during electroreduction of reactive metals in liquid electrolytes produces porous, low-density, mossy metal deposits that grow primarily along the surface normal vector to a planar electrode substrate. The moss-like deposits are fragile and cause premature failure of batteries by chemical, physical, and mechanical pathways. Here we use electroanalytical Rotating-Disk Electrode (RDE) studies in a three-electrode electrochemical cell to elucidate the fundamental origin of moss-like growth of metals. We report that competing Faradaic reactions occurring on the electrode surface is the source of the phenomenon. On this basis, we conclude that a moss-like growth regime can be accessed during electrodeposition of any metal by subtle shifts in electrolyte chemistry and deposition rate. Specifically, for Zn, a metal that conventionally is not known to form moss-like electrodeposits, obvious moss-like deposition patterns emerge at low-current densities in strongly-alkaline electrolytes that undergo electroreduction to form an interphase on the electrodeposited Zn. Conversely, we find that under conditions where the rate of metal electroplating is large relative to that of other competing Faradaic reactions, it is possible to eliminate the mossy-like growth regime for Zn. Taken together, our findings open up a new approach for simultaneously achieving favorable metal deposition morphology and fast charging in next-generation batteries using metal anodes. △ Less

Submitted 21 January, 2023; originally announced February 2023.

Nitrogen Plasma Passivated Niobium Resonators for Superconducting Quantum Circuits

Authors: K. Zheng, D. Kowsari, N. J. Thobaben, X. Du, X. Song, S. Ran, E. A. Henriksen, D. S. Wisbey, K. W. Murch

Abstract: Microwave loss in niobium metallic structures used for superconducting quantum circuits is limited by a native surface oxide layer formed over a timescale of minutes when exposed to an ambient environment. In this work, we show that nitrogen plasma treatment forms a niobium nitride layer at the metal-air interface which prevents such oxidation. X-ray photoelectron spectroscopy confirms the doping… ▽ More Microwave loss in niobium metallic structures used for superconducting quantum circuits is limited by a native surface oxide layer formed over a timescale of minutes when exposed to an ambient environment. In this work, we show that nitrogen plasma treatment forms a niobium nitride layer at the metal-air interface which prevents such oxidation. X-ray photoelectron spectroscopy confirms the doping of nitrogen more than 5 nm into the surface and a suppressed oxygen presence. This passivation remains stable after aging for 15 days in an ambient environment. Cryogenic microwave characterization shows an average filling factor adjusted two-level-system loss tangent $\rm{Fδ_{TLS}}$ of $(2.9\pm0.5)\cdot10^{-7}$ for resonators with 3 $\rmμ$m center strip and $(1.0\pm0.3)\cdot10^{-7}$ for 20 $\rmμ$m center strip, exceeding the performance of unpassivated samples by a factor of four. △ Less

Submitted 18 February, 2022; v1 submitted 5 January, 2022; originally announced January 2022.

Comments: 7 pages, 5 figures

Journal ref: Appl. Phys. Lett. 120, 102601 (2022)

Fabrication and surface treatment of electron-beam evaporated niobium for low-loss coplanar waveguide resonators

Authors: D. Kowsari, K. Zheng, J. T. Monroe, N. J. Thobaben, X. Du, P. M. Harrington, E. A. Henriksen, D. S. Wisbey, K. W. Murch

Abstract: We characterize low-loss electron-beam evaporated niobium thin films deposited under ultra-high vacuum conditions. Slow deposition yields films with a high superconducting transition temperature ($9.20 \pm 0.06 \rm ~K$) as well as a residual resistivity ratio of $4.8$. We fabricate the films into coplanar waveguide resonators to extract the intrinsic loss due to the presence of two-level-system fl… ▽ More We characterize low-loss electron-beam evaporated niobium thin films deposited under ultra-high vacuum conditions. Slow deposition yields films with a high superconducting transition temperature ($9.20 \pm 0.06 \rm ~K$) as well as a residual resistivity ratio of $4.8$. We fabricate the films into coplanar waveguide resonators to extract the intrinsic loss due to the presence of two-level-system fluctuators using microwave measurements. For a coplanar waveguide resonator gap of $2~μ\rm m$, the films exhibit filling-factor-adjusted two-level-system loss tangents as low as $1.5 \times 10^{-7}$ with single-photon regime internal quality factors in excess of one million after removing native surface oxides of the niobium. △ Less

Submitted 4 October, 2021; v1 submitted 11 August, 2021; originally announced August 2021.

Comments: 5 pages, 3 figures

Journal ref: Appl. Phys. Lett. 120, 102601 (2022)

Optical Direct Write of Dolan--Niemeyer-Bridge Junctions for Transmon Qubits

Authors: J. T. Monroe, D. Kowsari, K. Zheng, C. Gaikwad, J. Brewster, D. S. Wisbey, K. W. Murch

Abstract: We characterize highly coherent transmon qubits fabricated with a direct-write photolithography system. Multi-layer evaporation and oxidation allows us to change the critical current density by reducing the effective tunneling area and increasing the barrier thickness. Surface treatments before resist application and again before evaporation result in high coherence devices. With optimized surface… ▽ More We characterize highly coherent transmon qubits fabricated with a direct-write photolithography system. Multi-layer evaporation and oxidation allows us to change the critical current density by reducing the effective tunneling area and increasing the barrier thickness. Surface treatments before resist application and again before evaporation result in high coherence devices. With optimized surface treatments we achieve energy relaxation $T_1$ times in excess of $80\ μ$s for three dimensional transmon qubits with Josephson junction lithographic areas of 2 $μ\mathrm{m}^2$. △ Less

Submitted 9 August, 2021; v1 submitted 16 June, 2021; originally announced June 2021.

Comments: 7 pages, 3 figures

Journal ref: Appl. Phys. Lett. 119, 062601 (2021)

Photo-Excitation Dynamics in Electrochemically Charged CdSe Quantum Dots: from Hot Carrier Cooling to Auger Recombination of Negative Trions

Authors: Alireza Honarfar, Hassan Mourad, Weihua Lin, Alexey Polukeev, Ahibur Rahaman, Mohamed Abdellah, Pavel Chábera, Galina Pankratova, Lo Gorton, Kaibo Zheng, Tönu Pullerits

Abstract: Fulfilling the potential of the colloidal semiconductor quantum dots (QDs) in electrically driven applications remains a challenge largely since operation of such devices involves charged QDs with drastically different photo-physical properties compared to their well-studied neutral counterparts. In this work, the full picture of excited state dynamics in charged CdSe QDs at various time-scales ha… ▽ More Fulfilling the potential of the colloidal semiconductor quantum dots (QDs) in electrically driven applications remains a challenge largely since operation of such devices involves charged QDs with drastically different photo-physical properties compared to their well-studied neutral counterparts. In this work, the full picture of excited state dynamics in charged CdSe QDs at various time-scales has been revealed via transient absorption spectroscopy combined with electrochemistry as direct manipulation tool to control the negative charging of CdSe QDs. In trions, excited states of single charged QDs, the additional electron in the conduction band speeds up the hot electron cooling by enhanced electron-electron scattering followed by charge redistribution and polaron formation in picoseconds timescale. The trions are finally decayed by Auger process in 500 ps timescale. Double charging in QDs, on the other hand, decelerates the polaron formation process while accelerates the following Auger decay. Our work demonstrates the potential of photo-electrochemistry as a platform for ultrafast spectroscopy of charged species and paves a way for further studies to develop comprehensive knowledge of the photophysical processes in charged QDs more than the well-known Auger decay preparing their use in future optoelectronic applications. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Magnetic, electrochemical and thermoelectric properties of $P2 - Na_x(Co_{7/8}Sb_{1/8})O_2$

Authors: M. H. N. Assadi, S. Li, R. K. Zheng, S. P. Ringer, A. B. Yu

Abstract: We theoretically investigated the electronic, electrochemical and magnetic properties of Sb doped $Na_xCoO_2$ ($x = 1, 0.75$ and $0.50$). $Sb_{Co}$ dopants adopt +5 oxidation state in $Na_xCoO_2$ host lattice for all Na concentrations ($x$). Due to high oxidation states, $Sb^{5+}$ strongly repels Na ions and therefore it decreases the electrochemical potential (vs. Na/Na$^+$). The electrons introd… ▽ More We theoretically investigated the electronic, electrochemical and magnetic properties of Sb doped $Na_xCoO_2$ ($x = 1, 0.75$ and $0.50$). $Sb_{Co}$ dopants adopt +5 oxidation state in $Na_xCoO_2$ host lattice for all Na concentrations ($x$). Due to high oxidation states, $Sb^{5+}$ strongly repels Na ions and therefore it decreases the electrochemical potential (vs. Na/Na$^+$). The electrons introduced by $Sb^{5+}$ localize on nearby Co ions creating $Co^{2+}$ species which are absent in undoped $Na_xCoO_2$. $Co^{2+}$ ions reduce the spin entropy flow decreasing the Seebeck coefficient in the Sb doped compounds. The results can be generalized to other dopants with high oxidation state. △ Less

Submitted 26 February, 2019; originally announced February 2019.

Comments: 6 pages, 3 figures, 2 tables

Journal ref: Chemical Physics Letters 687, 233-237 (2017)

Ultrafast Studies of Hot-Hole Dynamics in Au/p-GaN Heterostructures

Authors: Giulia Tagliabue, Joseph S. DuChene, Mohamed Abdellah, Adela Habib, Yocefu Hattori, Kaibo Zheng, Sophie E. Canton, David J. Gosztola, Wen-Hui Cheng, Ravishankar Sundararaman, Jacinto Sa, Harry A. Atwater

Abstract: Harvesting non-equilibrium hot carriers from photo-excited metal nanoparticles has enabled plasmon-driven photochemical transformations and tunable photodetection with resonant nanoantennas. Despite numerous studies on the ultrafast dynamics of hot electrons, to date, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. An improved understanding of the carri… ▽ More Harvesting non-equilibrium hot carriers from photo-excited metal nanoparticles has enabled plasmon-driven photochemical transformations and tunable photodetection with resonant nanoantennas. Despite numerous studies on the ultrafast dynamics of hot electrons, to date, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. An improved understanding of the carrier dynamics in hot-hole-driven systems is needed to help expand the scope of hot-carrier optoelectronics beyond hot-electron-based devices. Here, using ultrafast transient absorption spectroscopy, we show that plasmon-induced hot-hole injection from gold (Au) nanoparticles into the valence band of p-type gallium nitride (p-GaN) occurs within 200 fs, placing hot-hole transfer on a similar timescale as hot-electron transfer. We further observed that the removal of hot holes from below the Au Fermi level exerts a discernible influence on the thermalization of hot electrons above it, reducing the peak electronic temperature and decreasing the electron-phonon coupling time relative to Au samples without a pathway for hot-hole collection. First principles calculations corroborate these experimental observations, suggesting that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles through ultrafast modulation of the d-band electronic structure. Taken together, these ultrafast studies substantially advance our understanding of the temporal evolution of hot holes in metal-semiconductor heterostructures and suggest new strategies for manipulating and controlling the energy distributions of hot carriers on ultrafast timescales. △ Less

Submitted 9 October, 2018; originally announced October 2018.

Comments: 12 pages, 4 figures

Intrinsic Ferromagnetism in the Diluted Magnetic Semiconductor Co:TiO$_2$

Authors: H. Saadaoui, X. Luo, Z. Salman, X. Y. Cui, N. N. Bao, P. Bao, R. K. Zheng, L. Tseng, Y. H. Du, T. Prokscha, A. Suter, T. Liu, Y. R. Wang, S. Li, J. Ding, S. P. Ringer, E. Morenzoni, J. B. Yi

Abstract: Here we present a study of magnetism in \CTO\ anatase films grown by pulsed laser deposition under a variety of oxygen partial pressures and deposition rates. Energy-dispersive spectrometry and transition electron microscopy analyses indicate that a high deposition rate leads to a homogeneous microstructure, while very low rate or postannealing results in cobalt clustering. Depth resolved low-ener… ▽ More Here we present a study of magnetism in \CTO\ anatase films grown by pulsed laser deposition under a variety of oxygen partial pressures and deposition rates. Energy-dispersive spectrometry and transition electron microscopy analyses indicate that a high deposition rate leads to a homogeneous microstructure, while very low rate or postannealing results in cobalt clustering. Depth resolved low-energy muon spin rotation experiments show that films grown at a low oxygen partial pressure ($\approx 10^{-6}$ torr) with a uniform structure are fully magnetic, indicating intrinsic ferromagnetism. First principles calculations identify the beneficial role of low oxygen partial pressure in the realization of uniform carrier-mediated ferromagnetism. This work demonstrates that Co:TiO$_2$ is an intrinsic diluted magnetic semiconductor. △ Less

Submitted 7 December, 2016; originally announced December 2016.

Comments: 6 pages, 4 figures, Supplemental Material (not included): 17 pages, 9 Figures

Journal ref: Physical Review Letters, 117, 227202 (2016)

Anomalous Hall Effect in Variable Range Hopping Regime: Unusual Scaling Law and Sign Reversal with Temperature

Authors: R. M. Qiao, S. S. Yan, T. S. Xu, M. W. Zhao, Y. X. Chen, G. L. Liu, W. L. Yang, R. K. Zheng, L. M. Mei

Abstract: Anomalous Hall effect (AHE) is important for understanding the topological properties of electronic states, and provides insight into the spin-polarized carriers of magnetic materials. AHE has been extensively studied in metallic, but not variable-range-hopping (VRH), regime. Here we report the experiments of both anomalous and ordinary Hall effect (OHE) in Mott and Efros VRH regimes. We found unu… ▽ More Anomalous Hall effect (AHE) is important for understanding the topological properties of electronic states, and provides insight into the spin-polarized carriers of magnetic materials. AHE has been extensively studied in metallic, but not variable-range-hopping (VRH), regime. Here we report the experiments of both anomalous and ordinary Hall effect (OHE) in Mott and Efros VRH regimes. We found unusual scaling law of the AHE coefficient $Rah=aRxx^b$ with b>2, contrasting the OHE coefficient $Roh=cRxx^d$ with d<1. More strikingly, the sign of AHE coefficient changes with temperature with specific electron densities. △ Less

Submitted 22 June, 2014; originally announced June 2014.

On the roles of graphene oxide doping for enhanced supercurrent in MgB2 based superconductors

Authors: W. K. Yeoh, X. Y. Cui, B. Gault, K. S. B. De Silva, X. Xu, H. W. Liu, H. W. Yen, D. Wong, P. Bao, D. J. Larson, I. Martin, W. X. Li, R. K. Zheng, X. L. Wang, S. X. Dou, S. P. Ringer

Abstract: Due to their graphene-like properties after oxygen reduction, incorporation of graphene oxide (GO) sheets into correlated-electron materials offers a new pathway for tailoring their properties. Fabricating GO nanocomposites with polycrystalline MgB2 superconductors leads to an order of magnitude enhancement of the supercurrent at 5 K/8 T and 20 K/4 T. Herein, we introduce a novel experimental appr… ▽ More Due to their graphene-like properties after oxygen reduction, incorporation of graphene oxide (GO) sheets into correlated-electron materials offers a new pathway for tailoring their properties. Fabricating GO nanocomposites with polycrystalline MgB2 superconductors leads to an order of magnitude enhancement of the supercurrent at 5 K/8 T and 20 K/4 T. Herein, we introduce a novel experimental approach to overcome the formidable challenge of performing quantitative microscopy and microanalysis of such composites, so as to unveil how GO doping influences the structure and hence the material properties. Atom probe microscopy and electron microscopy were used to directly image the GO within the MgB2, and we combined these data with computational simulations to derive the property-enhancing mechanisms. Our results reveal synergetic effects of GO, namely, via localized atomic (carbon and oxygen) doping as well as texturing of the crystals, which provide both inter and intra granular flux pinning. This study opens up new insights into how low-dimensional nanostructures can be integrated into composites to modify the overall properties, using a methodology amenable to a wide range of applications. △ Less

Submitted 19 May, 2014; originally announced May 2014.

Journal ref: Nanoscale, 2014,6, 6166-6172

Soft x-rays absorption and high-resolution powder x-ray diffraction study of superconducting CaxLa(1-x)Ba(1.75-x)La(0.25+x)Cu3Oy system

Authors: S. Agrestini, S. Sanna, K. Zheng, R. De Renzi, E. Pusceddu, G. Concas, N. L. Saini, A. Bianconi

Abstract: We have studied the electronic structure of unoccupied states measured by O K-edge and Cu L-edge x-ray absorption spectroscopy (XAS), combined with crystal structure studied by high resolution powder x-ray diffraction (HRPXRD), of charge-compensated layered superconducting CaxLa(1-x)Ba(1.75-x)La(0.25+x)Cu3Oy (0<x<0.4, 6.4<y<7.3) cuprate. A detailed analysis shows that, apart from hole doping, chem… ▽ More We have studied the electronic structure of unoccupied states measured by O K-edge and Cu L-edge x-ray absorption spectroscopy (XAS), combined with crystal structure studied by high resolution powder x-ray diffraction (HRPXRD), of charge-compensated layered superconducting CaxLa(1-x)Ba(1.75-x)La(0.25+x)Cu3Oy (0<x<0.4, 6.4<y<7.3) cuprate. A detailed analysis shows that, apart from hole doping, chemical pressure on the electronically active CuO2 plane due to the lattice mismatch with the spacer layers greatly influences the superconducting properties of this system. The results suggest chemical pressure to be the most plausible parameter to control the maximum critical temperatures (Tcmax) in different cuprate families at optimum hole density. △ Less

Submitted 2 October, 2013; originally announced October 2013.

Comments: 14 pages, 11 figures, accepted for publication in Journal of Physics and Chemistry of Solids

Journal ref: Journal of Physics and Chemistry of Solids 75 (2014) 259

Band filling effect on polaron localization in La$_{1-x}($Ca$_y$Sr$_{1-y}$)$_{x}$MnO$_3$ manganites

Authors: G. Allodi, R. De Renzi, K. Zheng, S. Sanna, A. Sidorenko, C. Baumann, L. Righi, F. Orlandi, G. Calestani

Abstract: We report on an a $μ$SR and $^{55}$Mn NMR investigation of the magnetic order parameter as a function of temperature in the optimally doped La$_{5/8}$(Ca$_y$Sr$_{1-y}$)$_{3/8}$MnO$_3$ and in the underdoped La$_{1-x}$Sr$_{x}$MnO$_3$ and La$_{1-x}$Ca$_{x}$MnO$_3$ metallic manganite families. The study is aimed at unraveling the effect of lattice distortions, implicitly controlled by the Ca-Sr isoele… ▽ More We report on an a $μ$SR and $^{55}$Mn NMR investigation of the magnetic order parameter as a function of temperature in the optimally doped La$_{5/8}$(Ca$_y$Sr$_{1-y}$)$_{3/8}$MnO$_3$ and in the underdoped La$_{1-x}$Sr$_{x}$MnO$_3$ and La$_{1-x}$Ca$_{x}$MnO$_3$ metallic manganite families. The study is aimed at unraveling the effect of lattice distortions, implicitly controlled by the Ca-Sr isoelectronic substitution, from that of hole doping $x$ on the Curie temperature $T_c$ and the order of the magnetic transition. At optimal doping, the transitions are second order at all $y$ values, including the $y=1$ (La$_{5/8}$Ca$_{3/8}$MnO$_3$) end member. In contrast, they are first order in the underdoped samples, which show a finite (truncated) order parameter at the Curie point, including La$_{0.75}$Sr$_{0.25}$MnO$_3$ whose $T_c$ is much higher than that of La$_{5/8}$Ca$_{3/8}$MnO$_3$. The order parameter curves, on the other hand, exhibit a very minor dependence on $x$, if truncation is excepted. This suggests that the effective exchange interaction between Mn ions is essentially governed by local distortions, in agreement with the original double-exchange model, while truncation is primarily, if not entirely, an effect of under- or overdoping. A phase diagram, separating in the $x-y$ plane polaron-driven first order transitions from regular second order transitions governed by critical fluctuations, is proposed for the La$_{1-x}($Ca$_y$Sr$_{1-y}$)$_{x}$MnO$_3$ system. △ Less

Submitted 27 September, 2013; originally announced September 2013.

Comments: submitted to Phys. Rev. B

Multiple exciton generation in nano-crystals revisited: Consistent calculation of the yield based on pump-probe spectroscopy

Authors: Khadga J. Karki, Fei Ma, Kaibo Zheng, Karel Zidek, Abdelrazek Mousa, Mohamed A. Abdellah, Maria Messing, L. Reine Wallenberg, Arkadi Yartsev, Tonu Pullerits

Abstract: Multiple exciton generation (MEG) is a process in which more than one exciton is generated upon the absorption of a high energy photon, typically higher than two times the band gap, in semiconductor nanocrystals. It can be observed experimentally using time resolved spectroscopy such as the transient absorption measurements. Quantification of the MEG yield is usu- ally done by assuming that the bi… ▽ More Multiple exciton generation (MEG) is a process in which more than one exciton is generated upon the absorption of a high energy photon, typically higher than two times the band gap, in semiconductor nanocrystals. It can be observed experimentally using time resolved spectroscopy such as the transient absorption measurements. Quantification of the MEG yield is usu- ally done by assuming that the bi-exciton signal is twice the signal from a single exciton. Herein we show that this assumption is not always justified and may lead to significant errors in the estimated MEG yields. We develop a methodology to determine proper scaling factors to the signals from the transient absorption experiments. Using the methodology we find modest MEG yields in lead chalcogenide nanocrystals including the nanorods. △ Less

Submitted 27 February, 2013; originally announced February 2013.

In-plane antiferromagnetism in $Na_{0.5}CoO_2$ induced by $Sb_{Co}$ dopants

Authors: M. H. N. Assadi, S. Li, R. K. Zheng, S. P. Ringer, A. B. Yu

Abstract: $Na_xCoO_2$ has a fascinating and complex magnetic phase diagram that can be further manipulated by doping. Here, we investigated the effect of electron doping on the magnetic coupling among $Co^{4+}$ ions in $Na_xCoO_2$ using density functional theory based on Hartree-Fock hybrid functional. We found that electron doping through substitutional $Sb_{Co}… ▽ More $Na_xCoO_2$ has a fascinating and complex magnetic phase diagram that can be further manipulated by doping. Here, we investigated the effect of electron doping on the magnetic coupling among $Co^{4+}$ ions in $Na_xCoO_2$ using density functional theory based on Hartree-Fock hybrid functional. We found that electron doping through substitutional $Sb_{Co}$ dopants flip the in-plane ferromagnetic coupling among $Co^{4+}$ ions in the undoped compound to antiferromagnetic. Electron doping through interstitial $Cu_{Int}$, however, does not have a similar effect as $Cu_{Int}$ dopant leaves the compound ferromagnetic, just like the case of the undoped compound. The results demonstrate the critical dependence of magnetic phase in $Na_{0.5}CoO_2$ on the dopant and its incorporation site. △ Less

Submitted 10 October, 2019; v1 submitted 26 November, 2012; originally announced November 2012.

Comments: 5 pages, 5 figures

Direct observation of local K variation and its correlation to electronic inhomogeneity in (Ba1-xKx)Fe2As2 Pnictide

Authors: W. K. Yeoh, B. Gault, X. Y. Cui, C. Zhu, M. P. Moody, L. Li, R. K. Zheng, W. X Li, X. L. Wang, S. X. Dou, C. T. Lin, S. P. Ringer

Abstract: Local fluctuations in the distribution of dopant atoms are a suspected cause of nanoscale electronic disorder or phase separation observed within the pnictide superconductors. Atom probe tomography results present the first direct observations of dopant nano-clustering in a K-doped 122-phase pnictides. First-principles calculations suggest the coexistence of static magnetism and superconductivity… ▽ More Local fluctuations in the distribution of dopant atoms are a suspected cause of nanoscale electronic disorder or phase separation observed within the pnictide superconductors. Atom probe tomography results present the first direct observations of dopant nano-clustering in a K-doped 122-phase pnictides. First-principles calculations suggest the coexistence of static magnetism and superconductivity on a lattice parameter length scale over a large range of doping concentrations. Collectively, our results provide evidence for a mixed scenario of phase coexistence and phase separation originating from variation of dopant atom experiments distroibutions. △ Less

Submitted 18 May, 2011; v1 submitted 3 April, 2011; originally announced April 2011.

Comments: 4 pages, 4 figures and 1 table, accepted by Physical Review Letter 2011

Journal ref: Phys. Rev. Lett. 106, 247002 (2011)

Graphene doping to enhance flux pinning and supercurrent carrying ability in magnesium diboride superconductor

Authors: X. Xu, S. X. Dou, X. L. Wang, J. H. Kim, J. A. Stride, M. Choucair, W. K. Yeoh, R. K. Zheng, S. P. Ringer

Abstract: It has been shown that graphene doping is sufficient to lead to an improvement in the critical current density - field performance (Jc(B)), with little change in the transition temperature in MgB2. At 3.7 at% graphene doping of MgB2 an optimal enhancement in Jc(B) was reached by a factor of 30 at 5 K and 10 T, compared to the un-doped sample. The results suggested that effective carbon substitut… ▽ More It has been shown that graphene doping is sufficient to lead to an improvement in the critical current density - field performance (Jc(B)), with little change in the transition temperature in MgB2. At 3.7 at% graphene doping of MgB2 an optimal enhancement in Jc(B) was reached by a factor of 30 at 5 K and 10 T, compared to the un-doped sample. The results suggested that effective carbon substitutions by grapheme, 2D nature of grapheme and the strain effect induced by difference thermal coefficient between single grapheme sheet and MgB2 superconductor may play an important role in flux pinning enhancement. △ Less

Submitted 27 January, 2010; originally announced January 2010.

The magnetic states of lightly hole-doped cuprates in the clean limit

Authors: F. Coneri, S. Sanna, K. Zheng, J. Lord, R. De Renzi

Abstract: We have performed extensive zero field muSR experiments on pure YBa2Cu3O6+y and diluted Y-rare-earth substituted Y0.92Eu0.08Ba2Cu3O6+y and Y0.925Nd0.075Ba2Cu3O6+y at light hole-doping. A common magnetic behavior is detected for all the three families, demonstrating negligible effects of the isovalent Y-substituent disorder. Two distinct regimes are identified, separated by a crossover, whose ori… ▽ More We have performed extensive zero field muSR experiments on pure YBa2Cu3O6+y and diluted Y-rare-earth substituted Y0.92Eu0.08Ba2Cu3O6+y and Y0.925Nd0.075Ba2Cu3O6+y at light hole-doping. A common magnetic behavior is detected for all the three families, demonstrating negligible effects of the isovalent Y-substituent disorder. Two distinct regimes are identified, separated by a crossover, whose origin is attributed to the concurrent thermal activation of spin and charge degrees of freedom: a thermally activated and a re-entrant quenched-hole antiferromagnetic regime. The peculiar temperature and hole density dependence of the magnetic moment m(h,T) fit a model with a (spin) activation energy for the crossover between the two regimes throughout the entire investigated range. The magnetic moment is suppressed by a simple dilution mechanism both in the reentrant regime (0<h<0.056) and in the so-called Cluster Spin Glass state coexisting with superconductivity (0.056<h<0.08). We argue a common magnetic ground state for these two doping regions and dub it quenched-hole antiferromagnet. Conversely frustration prevails in the thermally activated regime, that vanishes at the same concentration where superconductivity emerges, suggesting the presence of a quantum critical point at h_c=0.056(2). △ Less

Submitted 11 February, 2010; v1 submitted 29 November, 2009; originally announced November 2009.

Comments: 11 pags, 10 figs v2: notation changes: Quenched and Reentrant >>> Frozen, accordingly pedex Q and R >>> F

Journal ref: Phys. Rev. B 81,104507 (2010)

Experimental evidence of chemical-pressure-controlled superconductivity in cuprates

Authors: S. Sanna, S. Agrestini, K. Zheng, R. De Renzi, N. L. Saini

Abstract: X-ray absorption spectroscopy (XAS) and high resolution X-ray diffraction are combined to study the interplay between electronic and lattice structures in controlling the superconductivity in cuprates with a model charge-compensated CaxLa1-xBa1.75-xLa0.25+xCu3Oy (0<x<0.5, y=7.13) system. In spite of a large change in Tc, the doped holes, determined by the Cu L and O K XAS, hardly show any variat… ▽ More X-ray absorption spectroscopy (XAS) and high resolution X-ray diffraction are combined to study the interplay between electronic and lattice structures in controlling the superconductivity in cuprates with a model charge-compensated CaxLa1-xBa1.75-xLa0.25+xCu3Oy (0<x<0.5, y=7.13) system. In spite of a large change in Tc, the doped holes, determined by the Cu L and O K XAS, hardly show any variation with the x. On the other hand, the CuO2 plaquette size shows a systematic change due to different size of substituted cations. The results provide a direct evidence for the chemical pressure being a key parameter for controlling the superconducting ground state of the cuprates. △ Less

Submitted 8 June, 2009; originally announced June 2009.

Comments: Accepted for publication in EPL

Journal ref: EPL 86, 67007 (2009)

Enhanced Ferromagnetic Ordering in GdBaCo$_{2}$O$_{5.5+δ}$ Films on SrTiO3 (001) Substrate

Authors: G. Y. Wang, X. Y. Zhou, R. K. Zheng, Y. M. Hu, H. L. W. Chan, Y. Wang

Abstract: The authors investigated the structure and properties of GdBaCo$_{2}$O$_{5.5+δ}$ thin films epitaxially grown on SrTiO$_{3}$ (001) single crystal substrates. The thin films were found to have a notable remnant magnetization above room temperature, which is much higher than that observed in bulk material. Transmission electron microscopy and x-ray diffraction patterns reveal that phase separation… ▽ More The authors investigated the structure and properties of GdBaCo$_{2}$O$_{5.5+δ}$ thin films epitaxially grown on SrTiO$_{3}$ (001) single crystal substrates. The thin films were found to have a notable remnant magnetization above room temperature, which is much higher than that observed in bulk material. Transmission electron microscopy and x-ray diffraction patterns reveal that phase separation occurs in these films, and the phase responsible for the enhanced ferromagnetic order is $a$-oriented. The enhanced ferromagnetic order is attributed to the enhanced orbital order of Co$^{3+}$ in CoO$_{5}$ pyramids, and the disappearance of ferromagnetic to antiferromagnetic transition is explained the stabilization of higher spin state of Co$^{3+}$ in CoO$_{6}$ octahedra. △ Less

Submitted 10 January, 2009; originally announced January 2009.

Comments: 4 pages, 4 figures

Ni/Ni3C Core-Shell Nanochains and Its Magnetic Properties: One-Step Synthesis at low temperature

Authors: Wei Zhou, Lin He, Rongming Wang, Kun Zheng, Lin Guo, Chinping Chen, Xiaodong Han, Ze Zhang

Abstract: One-dimensional Ni/Ni3C core-shell nanoball chains with an average diameter by around 30 nm were synthesized by means of a mild chemical solution method using a soft template of trioctylphosphineoxide (TOPO). It was revealed that the uniform Ni nanochains were capped with Ni3C thin shells by about 1 to 4 nm in thickness and each Ni core consists of polygrains. The coercivity of the core-shell na… ▽ More One-dimensional Ni/Ni3C core-shell nanoball chains with an average diameter by around 30 nm were synthesized by means of a mild chemical solution method using a soft template of trioctylphosphineoxide (TOPO). It was revealed that the uniform Ni nanochains were capped with Ni3C thin shells by about 1 to 4 nm in thickness and each Ni core consists of polygrains. The coercivity of the core-shell nanochains is much enhanced (600 Oe at 5 K) and comparable with single Ni nanowires due to the one-dimensional shape anisotropy. Deriving from the distinctive structure of Ni core and Ni3C shell, this architecture may possess a possible bi-functionality. This unique architecture is also useful for the study on the magnetization reversal mechanism of one-dimensional magnetic nanostructure. △ Less

Submitted 11 December, 2008; originally announced December 2008.

Comments: 17 pages, 6 figure

Journal ref: Nanolett 8(4), 1147-1152 (2008)

Thermal strain-induced enhancement of electromagnetic properties in SiC-MgB2 composites

Authors: R. Zeng S. X. Dou, L. Lu, W. X. Li, J. H. Kim, P. Munroe, R. K. Zheng, S. P. Ringer

Abstract: Strain engineering has been used to modify materials properties in ferroelectric, superconducting, and ferromagnetic thin films. The advantage of strain engineering is that it can achieve unexpected enhancement in certain properties, such as an increase in ferroelectric critical temperature, Tc, by 300 to 500K, with a minimum detrimental effect on the intrinsic properties of the material. The st… ▽ More Strain engineering has been used to modify materials properties in ferroelectric, superconducting, and ferromagnetic thin films. The advantage of strain engineering is that it can achieve unexpected enhancement in certain properties, such as an increase in ferroelectric critical temperature, Tc, by 300 to 500K, with a minimum detrimental effect on the intrinsic properties of the material. The strain engineering has been largely applied to the materials in thin film form, where the strain is generated as a result of lattice mismatch between the substrate and component film or between layers in multilayer structures. Here, we report the observation of residual thermal stress/strain in dense SiC-MgB2 superconductor composites prepared by a diffusion method. We demonstrate that the thermal strain caused by the different thermal expansion coefficients between the MgB2 and SiC phases is responsible for the significant improvement in the critical current density, Jc, the irreversibility field, Hirr, and the upper critical field, Hc2, in the SiC-MgB2 composite where the carbon substitution level is low. In contrast to the common practice of improving the Jc and Hc2 of MgB2 through chemical substitution, by taking advantage of residual thermal strains we are able to design a composite, which shows only a small drop in Tc and little increase in resistivity, but a significant improvement over the Jc and Hc2 of MgB2. The present findings open up a new direction for manipulation of materials properties through strain engineering for materials in various forms. △ Less

Submitted 7 August, 2008; originally announced August 2008.

This paper as been withdrawn

Authors: R. K. Zheng

Abstract: This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. This paper as been withdrawn. △ Less

Submitted 4 February, 2008; v1 submitted 19 December, 2005; originally announced December 2005.

Self-assembly and self-orientation of truncated nano-octahedra of magnetite

Authors: R. K. Zheng, Hongwei Gu, Bing Xu, K. K. Fung, X. X. Zhang

Abstract: Monodispersed magnetite (Fe3O4) nanoparticles were synthesized. Transmission electron microscopy study shows that the nanoparticles are in the shape of Wagner-Seitz crystals. The magnetite nanoparticles self-assemble into body-centered cubic superlattice, in which the nanoparticles have the same crystallographic orientations. Shape plays a very critical role in controlling the orientation of the… ▽ More Monodispersed magnetite (Fe3O4) nanoparticles were synthesized. Transmission electron microscopy study shows that the nanoparticles are in the shape of Wagner-Seitz crystals. The magnetite nanoparticles self-assemble into body-centered cubic superlattice, in which the nanoparticles have the same crystallographic orientations. Shape plays a very critical role in controlling the orientation of the nanoparticles in the superlattice. Both the self-assembly and self-orientation of nanoparticles are important for technical applications. This can also act as a complement to conventional lithography techniques. △ Less

Submitted 19 December, 2005; originally announced December 2005.

Journal ref: Advanced Materials 18, 2418-2421 (2006)

The origin of the non-monotonic field dependence of the blocking temperature in magnetic nanoparticles

Authors: R. K. Zheng, Hongwei Gu, Bing Xu, X. X. Zhang

Abstract: The field dependence of the peak temperature of the zero-field-cooled (ZFC) magnetization curve of a magnetic nanoparticle system was studied using a diluted magnetic fluid composed of FePt nanoparticles. It is found that the peak temperature increases with increasing applied field below 3 kOe; it then decreases with further increasing the applied field. The non-monotonic field dependence of the… ▽ More The field dependence of the peak temperature of the zero-field-cooled (ZFC) magnetization curve of a magnetic nanoparticle system was studied using a diluted magnetic fluid composed of FePt nanoparticles. It is found that the peak temperature increases with increasing applied field below 3 kOe; it then decreases with further increasing the applied field. The non-monotonic field dependence of the peak temperature in magnetic particle systems is attributed to the anisotropic energy barrier distribution of the particles, and to the slowly decreasing magnetization (or to the non-Curies law dependence of magnetization) above the blocking temperature. The non-Curies law dependence of the magnetization is caused by large magnetic anisotropy and Zeeman energy of particles in high magnetic fields. Numerical simulation results, based on basic thermodynamics, and pure thermal relaxation and energy barrier distribution extracted from the low-field, experimental ZFC data show a good agreement with experimental results. △ Less

Submitted 13 January, 2005; originally announced January 2005.

Comments: submitted

Journal ref: J. Phys.: Condens. Matter 18, 5905-5910 (2006)

A Comment on "Memory Effects in an Interacting Magnetic Nanoparticle System"

Authors: R. K. Zheng, X. X. Zhang

Abstract: Recently, Sun et al reported that striking memory effects had been clearly observed in their new experiments on an interacting nanoparticle system [1]. They claimed that the phenomena evidenced the existence of a spin-glass-like phase and supported the hierarchical model. No doubt that a particle system may display spin-glass-like behaviors [2]. However, in our opinion, the experiments in Ref. [… ▽ More Recently, Sun et al reported that striking memory effects had been clearly observed in their new experiments on an interacting nanoparticle system [1]. They claimed that the phenomena evidenced the existence of a spin-glass-like phase and supported the hierarchical model. No doubt that a particle system may display spin-glass-like behaviors [2]. However, in our opinion, the experiments in Ref. [1] cannot evidence the existence of spin-glass-like phase at all. We will demonstrate below that all the phenomena in Ref. [1] can be observed in a non-interacting particle system with a size distribution. Numerical simulations of our experiments also display the same features. △ Less

Submitted 15 March, 2004; originally announced March 2004.

Comments: A comment on "Phys. Rev. Lett. 91, 167206"

Journal ref: Phys. Rev. Lett. 93, 139702 (2004)

The transport, ultrasound, and structural properties for the charge ordered Pr1-xCaxMnO3 (0.5<=x<=0.875) manganites

Authors: R. K. Zheng, G. Li, Y. Yang, A. N. Tang, W. Wang, T. Qian, X. G. Li

Abstract: The effects of the cooperative Jahn-Teller effect on the crystal structure and the stability of the charge ordered (CO) state were studied by measurements of powder X-ray diffraction, resistivity, and ultrasound for Pr1-xCaxMnO3 (0.5<=x<=0.875). Powder X-ray diffraction revealed a change of the crystal structure from tetragonally compressed to tetragonally elongated orthorhombic between x=0.75 a… ▽ More The effects of the cooperative Jahn-Teller effect on the crystal structure and the stability of the charge ordered (CO) state were studied by measurements of powder X-ray diffraction, resistivity, and ultrasound for Pr1-xCaxMnO3 (0.5<=x<=0.875). Powder X-ray diffraction revealed a change of the crystal structure from tetragonally compressed to tetragonally elongated orthorhombic between x=0.75 and x=0.8 in the CO state, resulting from the crossover of the cooperative Jahn-Teller vibration mode from Q2 to Q3. The relative stiffening of the ultrasound (DeltaV/V) reflecting the magnitude of the cooperative Jahn-Teller lattice distortion in the CO state increases with increasing x from 0.5 to 0.625, reaching the largest and being almost x-independence for 0.625<x<0.8, and drops steeply with further increase of x. Coincident with the variation of the DeltaV/V with x, the stability of the CO state reflected by the magnetoresistance effect increases with increasing x from 0.5 to 0.625, reaching the most stable for 0.625<x<0.825, and becomes unstable with further increase of x. These features demonstrate that the cooperative Jahn-Teller lattice distortion is one of the key ingredients in understanding the essential physics of the CO state in manganites. △ Less

Submitted 4 March, 2004; originally announced March 2004.

Comments: 26 pages, 8 figures. To be published in Phys. Rev. B

The role of the cooperative Jahn-Teller effect in the charge ordered La1-xCaxMnO3 (0.5<=x<=0.87) manganites

Authors: R. K. Zheng, G. Li, A. N. Tang, Y. Yang, W. Wang, X. G. Li, Z. D. Wang, H. C. Ku

Abstract: Based on the magnetoresistance, magnetization, ultrasound, and crystallographic data, we studied the role of the cooperative Jahn-Teller effect in the charge ordered (CO) state for La1-xCaxMnO3. We found that, with increasing the fraction of Q3 mode of Jahn-Teller distortion and decreasing that of Q2 mode in the CO state, the magnetic structure evolves from CE-type to C-type and the orbital orde… ▽ More Based on the magnetoresistance, magnetization, ultrasound, and crystallographic data, we studied the role of the cooperative Jahn-Teller effect in the charge ordered (CO) state for La1-xCaxMnO3. We found that, with increasing the fraction of Q3 mode of Jahn-Teller distortion and decreasing that of Q2 mode in the CO state, the magnetic structure evolves from CE-type to C-type and the orbital ordering changes from 3d(x2-r2)/3d(y2-r2)-type to 3d(x2-z2)-type, with the strength of ferromagnetism and the phase separation tendency being suppressed. At the same time, the stability of the CO state and the cooperative Jahn-Teller lattice distortion increase. These effects imply that the cooperative Jahn-Teller effect with different vibration modes is the key ingredient in understanding the essential physics of the CO state. △ Less

Submitted 8 November, 2003; originally announced November 2003.

Comments: 10 pages, 2 figures. To appear on Applied Physics Letters

Internal friction and Jahn-Teller effect in the charge-ordered La1-xCaxMnO3 (0.5<x<0.87)

Authors: R. K. Zheng, R. X. Huang, A. N. Tang, G. Li, X. G. Li, J. N. Wei, J. P. Shui, Z. Yao

Abstract: The Jahn-Teller effect in the charge-ordered (CO) state for La1-xCaxMnO3 (0.5<x<0.87) was studied by measuring the low-temperature powder x-ray diffraction, internal friction, and shear modulus. We find that the electron-lattice interaction with the static Jahn-Teller distortion is the strongest near x=0.75 in the CO state. It was particularly observed that a crossover of the Jahn-Teller vibrati… ▽ More The Jahn-Teller effect in the charge-ordered (CO) state for La1-xCaxMnO3 (0.5<x<0.87) was studied by measuring the low-temperature powder x-ray diffraction, internal friction, and shear modulus. We find that the electron-lattice interaction with the static Jahn-Teller distortion is the strongest near x=0.75 in the CO state. It was particularly observed that a crossover of the Jahn-Teller vibration mode from Q2 to Q3 near x=0.75 induces crossovers of the crystal structure from tetragonally compressed to tetragonally elongated orthorhombic, and of the magnetic structure from CE-type to C-type near x=0.75. The experimental results give strong evidence that the Jahn-Teller effect not only plays a key role in stabilizing the CO state, but also determines the magnetic and crystal structures in the CO state for La1-xCaxMnO3. △ Less

Submitted 1 December, 2002; originally announced December 2002.

Comments: 13 pages, 3 figures, PDF

Journal ref: Appl. Phys. Lett. 81(20), 3834 (2002)

Jahn-Teller effect and stability of the charge-ordered state in La1-xCaxMnO3 (0.5<x<0.9) manganites

Authors: X. G. Li, R. K. Zheng, G. Li, H. D. Zhou, R. X. Huang, J. Q. Xie, Z. D. Wang

Abstract: The longitudinal ultrasonic sound velocity and attenuation, the resistivity, and lattice parameters were studied as a function of temperature from 30 K to 300 K in La1-xCaxMnO3 (0.5<x<0.9). For all the samples, a dramatic stiffening of the sound velocity below the charge ordering transition temperature TCO was directly driven by distinct changes of the lattice parameters due to the formation of… ▽ More The longitudinal ultrasonic sound velocity and attenuation, the resistivity, and lattice parameters were studied as a function of temperature from 30 K to 300 K in La1-xCaxMnO3 (0.5<x<0.9). For all the samples, a dramatic stiffening of the sound velocity below the charge ordering transition temperature TCO was directly driven by distinct changes of the lattice parameters due to the formation of long range ordering of Jahn-Teller distorted MnO6 octahedra. The relative change of the sound velocity (DeltaV/V) below TCO depends on the Ca concentration x and reaches the maximum at x=0.75, implying that the effective strength of electron-lattice interaction with the Jahn-Teller distortion is the strongest at x=0.75 and hence the charge ordered state is mostly stabilized near x=0.75 and insensitive to the application of a magnetic field, which is supported by the charge transport properties under high magnetic fields up to 14T. △ Less

Submitted 1 December, 2002; originally announced December 2002.

Comments: 16 pages, 5 figures, PDF

Journal ref: Europhys. Lett. 60(5), 670 (2002)