Showing 1–36 of 36 results for author: Zandbergen, H W

Operando observation of reversible oxygen migration and phase transitions in ferroelectric devices

Authors: Pavan Nukala, Majid Ahmadi, Yingfen Wei, Sytze de Graaf, Sylvia Matzen, Henny W. Zandbergen, Bart Kooi, Beatriz Noheda

Abstract: Unconventional ferroelectricity, robust at reduced nanoscale sizes, exhibited by hafnia-based thin-films presents tremendous opportunities in nanoelectronics. However, the exact nature of polarization switching remains controversial. Here, we investigate epitaxial Hf0.5Zr0.5O2 (HZO) capacitors, interfaced with oxygen conducting metals (La0.67Sr0.33MnO3, LSMO) as electrodes, using atomic resolution… ▽ More Unconventional ferroelectricity, robust at reduced nanoscale sizes, exhibited by hafnia-based thin-films presents tremendous opportunities in nanoelectronics. However, the exact nature of polarization switching remains controversial. Here, we investigate epitaxial Hf0.5Zr0.5O2 (HZO) capacitors, interfaced with oxygen conducting metals (La0.67Sr0.33MnO3, LSMO) as electrodes, using atomic resolution electron microscopy while in situ electrical biasing. By direct oxygen imaging, we observe reversible oxygen vacancy migration from the bottom to the top electrode through HZO and reveal associated reversible structural phase transitions in the epitaxial LSMO and HZO layers. We follow the phase transition pathways at the atomic scale and identify that these mechanisms are at play both in tunnel junctions and ferroelectric capacitors switched with sub-millisecond pulses. Our results unmistakably demonstrate that oxygen voltammetry and polarization switching are intertwined in these materials. △ Less

Submitted 21 October, 2020; originally announced October 2020.

Comments: 29 pages (including supplementary), 4 main figures, 6 supplementary figures

Through-membrane electron-beam lithography for ultrathin membrane applications

Authors: M. Neklyudova, A. K. Erdamar, L. Vicarelli, S. J. Heerema, T. Rehfeldt, G. Pandraud, Z. Kolahdouz, C. Dekker, H. W. Zandbergen

Abstract: We present a technique to fabricate ultrathin (down to 20 nm) uniform electron transparent windows at dedicated locations in a SiN membrane for in situ transmission electron microscopy experiments. An electron-beam (e-beam) resist is spray-coated on the backside of the membrane in a KOH- etched cavity in silicon which is patterned using through-membrane electron-beam lithography. This is a control… ▽ More We present a technique to fabricate ultrathin (down to 20 nm) uniform electron transparent windows at dedicated locations in a SiN membrane for in situ transmission electron microscopy experiments. An electron-beam (e-beam) resist is spray-coated on the backside of the membrane in a KOH- etched cavity in silicon which is patterned using through-membrane electron-beam lithography. This is a controlled way to make transparent windows in membranes, whilst the topside of the membrane remains undamaged and retains its flatness. Our approach was optimized for MEMS-based heating chips but can be applied to any chip design. We show two different applications of this technique for (1) fabrication of a nanogap electrode by means of electromigration in thin free-standing metal films and (2) making low-noise graphene nanopore devices. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Journal ref: Appl. Phys. Lett. 111, 063105 (2017)

Phase-transitions in spin-crossover thin films probed by graphene transport measurements

Authors: J. Dugay, M. Aarts, M. Giménez-Marqués, T. Kozlova, H. W. Zandbergen, E. Coronado, H. S. J van der Zant

Abstract: Future multi-functional hybrid devices might combine switchable molecules and 2D material-based devices. Spin-crossover compounds are of particular interest in this context since they exhibit bistability and memory effects at room temperature while responding to numerous external stimuli. Atomically-thin 2D materials such as graphene attract a lot of attention for their fascinating electrical, opt… ▽ More Future multi-functional hybrid devices might combine switchable molecules and 2D material-based devices. Spin-crossover compounds are of particular interest in this context since they exhibit bistability and memory effects at room temperature while responding to numerous external stimuli. Atomically-thin 2D materials such as graphene attract a lot of attention for their fascinating electrical, optical, and mechanical properties, but also for their reliability for room-temperature operations. Here, we demonstrate that thermally-induced spin-state switching of spin-crossover nanoparticle thin films can be monitored through the electrical transport properties of graphene lying underneath the films. Model calculations indicate that the charge carrier scattering mechanism in graphene is sensitive to the spin-state dependence of the relative dielectric constants of the spin-crossover nanoparticles. This graphene sensor approach can be applied to a wide class of (molecular) systems with tunable electronic polarizabilities. △ Less

Submitted 15 September, 2016; originally announced September 2016.

Comments: main text: 13 pages, 5 figures ; SI: 14 pages, 12 figures

Spin switching in electronic devices based on 2D assemblies of spin-crossover nanoparticles

Authors: Julien Dugay, Mónica Giménez-Marqués, Tatiana Kozlova, Henny W Zandbergen, Eugenio Coronado, Herre S. J. van der Zant

Abstract: In this communication we study the transport properties of two-dimensional assemblies of [Fe(Htrz)2(trz)](BF4) spin-crossover nanoparticles (NPs) with two different morphologies. The NPs have been synthesized made in a similar manner than in our previous study in which single NPs were measured. We prepared free-standing self-assembled monolayer sheets of both SCO NPs formed at the air/liquid inter… ▽ More In this communication we study the transport properties of two-dimensional assemblies of [Fe(Htrz)2(trz)](BF4) spin-crossover nanoparticles (NPs) with two different morphologies. The NPs have been synthesized made in a similar manner than in our previous study in which single NPs were measured. We prepared free-standing self-assembled monolayer sheets of both SCO NPs formed at the air/liquid interface on holey carbon TEM grids to extract their global arrangement and NP size distributions by STEM-HAADF technique. The SCO NP systems present a rod-like shape and possess two different volumes, corresponding to lengths of 25 nm and 44 nm along the rod direction and average diameters of 10 nm and 6 nm respectively. In a similar manner, sheets of SCO NPs with the two different morphologies were electrically measured by contacting them on pre-patterned gold electrodes substrates. For both NP morphologies, a thermal hysteresis loop in the electrical conductance near room temperature was observed, which was correlated to their morphologies and 2D organization. The most remarkable result was the observation of an unprecedented large change in the electrical conductance of the two spin states, increasing by up to two orders of magnitude in the 2D assemblies of spin-crossover NPs. This value is significantly larger than that obtained in single-NP measurements (~ 3). Although such large conductance changes are not fully understood, our results point at important contributions from its size/morphology-dependence at the nanoscale. △ Less

Submitted 3 December, 2014; originally announced December 2014.

Comments: 5 main figures (including 1 table), 5 supporting figures (including 2 tables)

Isolation and characterization of few-layer black phosphorus

Authors: Andres Castellanos-Gomez, Leonardo Vicarelli, Elsa Prada, Joshua O. Island, K. L. Narasimha-Acharya, Sofya I. Blanter, Dirk J. Groenendijk, Michele Buscema, Gary A. Steele, J. V. Alvarez, Henny W. Zandbergen, J. J. Palacios, Herre S. J. van der Zant

Abstract: Isolation and characterization of mechanically exfoliated black phosphorus flakes with a thickness down to two single-layers is presented. A modification of the mechanical exfoliation method, which provides higher yield of atomically thin flakes than conventional mechanical exfoliation, has been developed. We present general guidelines to determine the number of layers using optical microscopy, Ra… ▽ More Isolation and characterization of mechanically exfoliated black phosphorus flakes with a thickness down to two single-layers is presented. A modification of the mechanical exfoliation method, which provides higher yield of atomically thin flakes than conventional mechanical exfoliation, has been developed. We present general guidelines to determine the number of layers using optical microscopy, Raman spectroscopy and transmission electron microscopy in a fast and reliable way. Moreover, we demonstrate that the exfoliated flakes are highly crystalline and that they are stable even in free-standing form through Raman spectroscopy and transmission electron microscopy measurements. A strong thickness dependence of the band structure is found by density functional theory calculations. The exciton binding energy, within an effective mass approximation, is also calculated for different number of layers. Our computational results for the optical gap are consistent with preliminary photoluminescence results on thin flakes. Finally, we study the environmental stability of black phosphorus flakes finding that the flakes are very hydrophilic and that long term exposure to air moisture etches black phosphorus away. Nonetheless, we demonstrate that the aging of the flakes is slow enough to allow fabrication of field-effect transistors with strong ambipolar behavior. Density functional theory calculations also give us insight into the water-induced changes of the structural and electronic properties of black phosphorus. △ Less

Submitted 11 July, 2014; v1 submitted 3 March, 2014; originally announced March 2014.

Comments: 11 main figures, 7 supporting figures

Journal ref: 2D Matererials, 2014, 1(2) 025001

Conductivity of LaAlO/SrTiO3 Interfaces made by Sputter Deposition

Authors: I. M. Dildar, D. B. Boltje, M. H. S. Hesselberth, Q. Xu, H. W. Zandbergen, S. Harkema

Abstract: We have investigated the properties of interfaces between LaAlO3 films grown on SrTiO3 substrates singly terminated by TiO2. We used RF sputtering in a high-pressure oxygen atmosphere. The films are smooth, with flat surfaces. Transmission Electron Microscopy shows atomically sharp and continuous interfaces while EELS measurements show some slight intermixing. The elemental ratio of La to Al measu… ▽ More We have investigated the properties of interfaces between LaAlO3 films grown on SrTiO3 substrates singly terminated by TiO2. We used RF sputtering in a high-pressure oxygen atmosphere. The films are smooth, with flat surfaces. Transmission Electron Microscopy shows atomically sharp and continuous interfaces while EELS measurements show some slight intermixing. The elemental ratio of La to Al measured by EDX is found to be 1.07. Importantly, we find these interfaces to be non-conducting, indicating that the sputtered interface is not electronically reconstructed in the way reported for films grown by Pulsed Laser Deposition because of the different interplay between stoichiometry, mixing and oxygen vacancies. △ Less

Submitted 21 November, 2011; originally announced November 2011.

Comments: 3 pages, 5 figures

Crystal fields, disorder, and antiferromagnetic short-range order in Yb0.24Sn0.76Ru

Authors: T. Klimczuk, C. H. Wang, J. M. Lawrence, Q. Xu, T. Durakiewicz, F. Ronning, A. Llobet, F. Trouw, N. Kurita, Y. Tokiwa, Han-oh Lee, C. H. Booth, J. S. Gardner, E. D. Bauer, J. J. Joyce, H. W. Zandbergen, R. Movshovich, R. J. Cava, J. D. Thompson

Abstract: We report extensive measurements on a new compound (Yb0.24Sn0.76)Ru that crystallizes in the cubic CsCl structure. Valence band photoemission and L3 x-ray absorption show no divalent component in the 4f configuration of Yb. Inelastic neutron scattering (INS) indicates that the eight-fold degenerate J-multiplet of Yb3+ is split by the crystalline electric field (CEF) into a Γ7 doublet ground state… ▽ More We report extensive measurements on a new compound (Yb0.24Sn0.76)Ru that crystallizes in the cubic CsCl structure. Valence band photoemission and L3 x-ray absorption show no divalent component in the 4f configuration of Yb. Inelastic neutron scattering (INS) indicates that the eight-fold degenerate J-multiplet of Yb3+ is split by the crystalline electric field (CEF) into a Γ7 doublet ground state and a Γ8 quartet at an excitation energy 20 meV. The magnetic susceptibility can be fit very well by this CEF scheme under the assumption that a Γ6 excited state resides at 32 meV; however, the Γ8/Γ6 transition expected at 12 meV was not observed in the INS. The resistivity follows a Bloch- Grüneisen law shunted by a parallel resistor, as is typical of systems subject to phonon scattering with no apparent magnetic scattering. All of these properties can be understood as representing simple local moment behavior of the trivalent Yb ion. At 1 K, there is a peak in specific heat that is too broad to represent a magnetic phase transition, consistent with absence of magnetic reflections in neutron diffraction. On the other hand, this peak also is too narrow to represent the Kondo effect in the Γ7 ground state doublet. On the basis of the field-dependence of the specific heat, we argue that antiferromagnetic shortrange order (possibly co-existing with Kondo physics) occurs at low temperatures. The long-range magnetic order is suppressed because the Yb site occupancy is below the percolation threshold for this disordered compound. △ Less

Submitted 28 August, 2011; originally announced August 2011.

Journal ref: Phys. Rev. B 84, 075152 (2011)

Superconductivity at 2.3 K in the misfit compound (PbSe)1.16(TiSe2)2

Authors: N. Giang, Q. Xu, Y. S. Hor, A. J. Williams, S. E. Dutton, H. W. Zandbergen, R. J. Cava

Abstract: The structural misfit compound (PbSe)1.16(TiSe2)2 is reported. It is a superconductor with a Tc of 2.3 K. (PbSe)1.16(TiSe2)2 derives from a parent compound, TiSe2, which shows a charge density wave transition and no superconductivity. The crystal structure, characterized by high resolution electron microscopy and powder x-ray diffraction, consists of two layers of 1T-TiSe2 alternating with a doubl… ▽ More The structural misfit compound (PbSe)1.16(TiSe2)2 is reported. It is a superconductor with a Tc of 2.3 K. (PbSe)1.16(TiSe2)2 derives from a parent compound, TiSe2, which shows a charge density wave transition and no superconductivity. The crystal structure, characterized by high resolution electron microscopy and powder x-ray diffraction, consists of two layers of 1T-TiSe2 alternating with a double layer of (100) PbSe. Transport measurements suggest that the superconductivity is induced by charge transfer from the PbSe layers to the TiSe2 layers. △ Less

Submitted 30 June, 2010; originally announced June 2010.

Comments: 17 pages, 4 figures. To be published in Physical Review B

DNA Translocation through Graphene Nanopores

Authors: Grégory F. Schneider, Stefan W. Kowalczyk, Victor E. Calado, Grégory Pandraud, Henny W. Zandbergen, Lieven M. K. Vandersypen, Cees Dekker

Abstract: Nanopores -- nanosized holes that can transport ions and molecules -- are very promising devices for genomic screening, in particular DNA sequencing. Both solid-state and biological pores suffer from the drawback, however, that the channel constituting the pore is long, viz. 10-100 times the distance between two bases in a DNA molecule (0.5 nm for single-stranded DNA). Here, we demonstrate that it… ▽ More Nanopores -- nanosized holes that can transport ions and molecules -- are very promising devices for genomic screening, in particular DNA sequencing. Both solid-state and biological pores suffer from the drawback, however, that the channel constituting the pore is long, viz. 10-100 times the distance between two bases in a DNA molecule (0.5 nm for single-stranded DNA). Here, we demonstrate that it is possible to realize and use ultrathin nanopores fabricated in graphene monolayers for single-molecule DNA translocation. The pores are obtained by placing a graphene flake over a microsize hole in a silicon nitride membrane and drilling a nanosize hole in the graphene using an electron beam. As individual DNA molecules translocate through the pore, characteristic temporary conductance changes are observed in the ionic current through the nanopore, setting the stage for future genomic screening. △ Less

Submitted 26 May, 2010; originally announced May 2010.

Superconductivity in CuxBi2Se3 and its implications for pairing in the undoped topological insulator

Authors: Y. S. Hor, A. J. Williams, J. G. Checkelsky, P. Roushan, J. Seo, Q. Xu, H. W. Zandbergen, A. Yazdani, N. P. Ong, R. J. Cava

Abstract: Bi2Se3 is one of a handful of known topological insulators. Here we show that copper intercalation in the van der Waals gaps between the Bi2Se3 layers, yielding an electron concentration of ~ 2 x 10^20cm-3, results in superconductivity at 3.8 K in CuxBi2Se3 for x between 0.12 and 0.15. This demonstrates that Cooper pairing is possible in Bi2Se3 at accessible temperatures, with implications for s… ▽ More Bi2Se3 is one of a handful of known topological insulators. Here we show that copper intercalation in the van der Waals gaps between the Bi2Se3 layers, yielding an electron concentration of ~ 2 x 10^20cm-3, results in superconductivity at 3.8 K in CuxBi2Se3 for x between 0.12 and 0.15. This demonstrates that Cooper pairing is possible in Bi2Se3 at accessible temperatures, with implications for study of the physics of topological insulators and potential devices. △ Less

Submitted 15 September, 2009; originally announced September 2009.

Comments: 6 pages, 4 figures

Journal ref: Physical Review Letters 104, 057001 (2010)

Extreme Sensitivity of Superconductivity to Stoichiometry in FeSe (Fe1+dSe)

Authors: T. M. McQueen, Q. Huang, V. Ksenofontov, C. Felser, Q. Xu, H. W. Zandbergen, Y. S. Hor, J. Allred, A. J. Williams, D. Qu, J. Checkelsky, N. P. Ong, R. J. Cava

Abstract: The recently discovered iron arsenide superconductors, which display superconducting transition temperatures as high as 55 K, appear to share a number of general features with high-Tc cuprates, including proximity to a magnetically ordered state and robustness of the superconductivity in the presence of disorder. Here we show that superconductivity in Fe1+dSe, the parent compound of the supercon… ▽ More The recently discovered iron arsenide superconductors, which display superconducting transition temperatures as high as 55 K, appear to share a number of general features with high-Tc cuprates, including proximity to a magnetically ordered state and robustness of the superconductivity in the presence of disorder. Here we show that superconductivity in Fe1+dSe, the parent compound of the superconducting arsenide family, is destroyed by very small changes in stoichiometry. Further, we show that non-superconducting Fe1+dSe is not magnetically ordered down to low temperatures. These results suggest that robust superconductivity and immediate instability against an ordered magnetic state should not be considered as intrinsic characteristics of iron-based superconducting systems, and that Fe1+dSe may present a unique opportunity for determining which materials characteristics are critical to the existence of superconductivity in high Tc iron arsenide superconductors and which are not. △ Less

Submitted 2 February, 2009; v1 submitted 10 November, 2008; originally announced November 2008.

Comments: Updated to reflect final version and include journal reference

Journal ref: Phys. Rev. B 79, 014522 (2009)

Tuning the Charge Density Wave and Superconductivity in CuxTaS2

Authors: K. E. Wagner, E. Morosan, Y. S. Hor, J. Tao, Y. Zhu, T. Sanders, T. M. McQueen, H. W. Zandbergen, A. J. Williams, D. V. West, R. J. Cava

Abstract: We report the characterization of layered, 2H-type CuxTaS2, for x between 0 and 0.12. The charge density wave (CDW), at 70 K for TaS2, is destabilized with Cu doping. The sub-1K superconducting transition in undoped 2H-TaS2 jumps quickly to 2.5 K at low x, increases to 4.5 K at the optimal composition Cu0.04TaS2, and then decreases at higher x. The electronic contribution to the specific heat, f… ▽ More We report the characterization of layered, 2H-type CuxTaS2, for x between 0 and 0.12. The charge density wave (CDW), at 70 K for TaS2, is destabilized with Cu doping. The sub-1K superconducting transition in undoped 2H-TaS2 jumps quickly to 2.5 K at low x, increases to 4.5 K at the optimal composition Cu0.04TaS2, and then decreases at higher x. The electronic contribution to the specific heat, first increasing and then decreasing as a function of Cu content, is 12 mJ mol-1 K-2 at Cu0.04TaS2. Electron diffraction studies show that the CDW remains present at the optimal superconducting composition, but with both a changed q vector and decreased coherence length. We present an electronic phase diagram for the system. △ Less

Submitted 15 August, 2008; originally announced August 2008.

Comments: 7 pages, 9 figures. To be published in Physical Review B

Journal ref: Phys. Rev. B 78, 104520 (2008)

Structural Disorder, Octahedral Coordination, and 2-Dimensional Ferromagnetism in Anhydrous Alums

Authors: D. V. West, Q. Huang, H. W. Zandbergen, T. M. McQueen, R. J. Cava

Abstract: The crystal structures of the triangular lattice, layered anhydrous alums KCr(SO4)2, RbCr(SO4)2 and KAl(SO4)2 are characterized by X-ray and neutron powder diffraction at temperatures between 1.4 and 773 K. The compounds all crystallize in the space group P-3, with octahedral coordination of the trivalent cations. In all cases, small amounts of disorder in the stacking of the triangular layers o… ▽ More The crystal structures of the triangular lattice, layered anhydrous alums KCr(SO4)2, RbCr(SO4)2 and KAl(SO4)2 are characterized by X-ray and neutron powder diffraction at temperatures between 1.4 and 773 K. The compounds all crystallize in the space group P-3, with octahedral coordination of the trivalent cations. In all cases, small amounts of disorder in the stacking of the triangular layers of corner sharing MO6 octahedra and SO4 tetrahedra is seen, with the MO6-SO4 network rotated in opposite directions between layers. The electron diffraction study of KCr(SO4)2 supports this model, which on average can be taken to imply trigonal prismatic coordination for the M3+ ions; as was previously reported for the prototype anhydrous alum KAl(SO4)2. The temperature dependent magnetic susceptibilities for ACr(SO4)2 (A = K,Rb,Cs) indicate the presence of predominantly ferromagnetic interactions. Low temperature powder neutron diffraction reveals that the magnetic ordering is ferromagnetic in-plane, with antiferromagnetic ordering between planes below 3 K. △ Less

Submitted 11 July, 2008; originally announced July 2008.

Comments: Accepted to the Journal of Solid State Chemistry

Journal ref: Journal of Solid State Chemistry Volume 181, Issue 10, October 2008, Pages 2768-2775

Frustrated Ferroelectricity in Niobate Pyrochlores

Authors: T. M. McQueen, B. Muegge, Q. Huang, K. Noble, H. W. Zandbergen, R. J. Cava

Abstract: The crystal structures of the A2B2O7-x Niobium-based pyrochlores Y2(Nb0.86Y0.14)2O6.91, CaYNb2O7, and Y2NbTiO7 are reported, determined by powder neutron diffraction. These compounds represent the first observation of B-site displacements in the pyrochlore structure: the B-site ions are found to be displaced from the ideal pyrochlore positions, creating electric dipoles. The orientations of thes… ▽ More The crystal structures of the A2B2O7-x Niobium-based pyrochlores Y2(Nb0.86Y0.14)2O6.91, CaYNb2O7, and Y2NbTiO7 are reported, determined by powder neutron diffraction. These compounds represent the first observation of B-site displacements in the pyrochlore structure: the B-site ions are found to be displaced from the ideal pyrochlore positions, creating electric dipoles. The orientations of these dipoles are fully analogous to orientations of the magnetic moments in Ising spin based magnetically frustrated pyrochlores. Diffuse scattering in electron diffraction patterns shows that the displacements are only short range ordered, indicative of geometric frustration of the collective dielectric state of the materials. Comparison to the crystal structure of the Nb5+ (d0) pyrochlore La2ScNbO7 supports the prediction that charge singlets, driven by the tendency of Nb to form metal-metal bonds, are present in these pyrochlores. The observed lack of long-range order to these singlets suggests that Nb4+-based pyrochlores represent the dielectric analogy to the geometric frustration of magnetic moments observed in rare earth pyrochlores. △ Less

Submitted 11 April, 2008; originally announced April 2008.

Comments: Accepted to Journal of Physics: Condensed Matter

Journal ref: J. Phys.: Condens. Matter 20, 235210 (2008)

Structures of the reduced niobium oxides Nb12O29 and Nb22O54

Authors: T. McQueen, Q. Xu, E. N. Andersen, H. W. Zandbergen, R. J. Cava

Abstract: The crystal structure of Nb22O54 is reported for the first time, and the structure of orthorhombic Nb12O29 is reexamined, resolving previous ambiguities. Single crystal x-ray and electron diffraction were employed. These compounds were found to crystallize in the space groups P2/m (a = 15.7491(2) A, b = 3.8236(3) A, c = 17.8521(2) A, beta = 102.029(3)) and Cmcm (a = 3.8320(2) A, b = 20.7400(9) A… ▽ More The crystal structure of Nb22O54 is reported for the first time, and the structure of orthorhombic Nb12O29 is reexamined, resolving previous ambiguities. Single crystal x-ray and electron diffraction were employed. These compounds were found to crystallize in the space groups P2/m (a = 15.7491(2) A, b = 3.8236(3) A, c = 17.8521(2) A, beta = 102.029(3)) and Cmcm (a = 3.8320(2) A, b = 20.7400(9) A, c = 28.8901(13) A) respectively and share a common structural unit, a 4x3 block of corner sharing NbO6 octahedra. Despite different constraints imposed by symmetry these blocks are very similar in both compounds. Within a block, it is found that the niobium atoms are not located in the centers of the oxygen octahedra, but rather are displaced inward toward the center of the block forming an apparent antiferroelectric state. Bond valence sums and bond lengths do not show the presence of charge ordering, suggesting that all 4d electrons are delocalized in these compounds at the temperature studied, T = 200 K. △ Less

Submitted 5 August, 2007; originally announced August 2007.

Comments: 19 pages, 4 figures, accepted to J. Sol. St. Chem

Journal ref: J. Sol. St. Chem. 180, 2864-2870 (2007)

Structural Disorder and Properties of the Stuffed Pyrochlore Ho2TiO5

Authors: G. C. Lau, B. G. Ueland, M. L. Dahlberg, R. S. Freitas, Q. Huang, H. W. Zandbergen, P. Schiffer, R. J. Cava

Abstract: We report a structural and thermodynamic study of the "stuffed spin ice" material Ho2TiO5 (i.e., Ho2(Ti1.33Ho0.67)O6.67), comparing samples synthesized through two different routes. Neutron powder diffraction and electron diffraction reveal that the previously reported defect fluorite phase has short-range pyrochlore ordering, in that there are domains in which the Ho and Ho/Ti sublattices are d… ▽ More We report a structural and thermodynamic study of the "stuffed spin ice" material Ho2TiO5 (i.e., Ho2(Ti1.33Ho0.67)O6.67), comparing samples synthesized through two different routes. Neutron powder diffraction and electron diffraction reveal that the previously reported defect fluorite phase has short-range pyrochlore ordering, in that there are domains in which the Ho and Ho/Ti sublattices are distinct. By contrast, a sample prepared through a floating zone method has long range ordering of these sublattices. Despite the differences in crystal structures, the two versions of Ho2TiO5 display similar magnetic susceptibilities. Field dependent magnetization and measured recovered entropies, however, show a difference between the two forms, suggesting that the magnetic properties of the stuffed pyrochlores depend on the local structure. △ Less

Submitted 11 May, 2007; originally announced May 2007.

Comments: submitted to Phys. Rev. B

The structures and thermoelectric properties of the infinitely adaptive series (Bi2)m(Bi2Te3)n

Authors: J. W. G. Bos, H. W. Zandbergen, M. -H. Lee, N. P. Ong, R. J. Cava

Abstract: The structures and thermoelectric properties of the (Bi2)m(Bi2Te3)n homologous series, derived from stacking hexagonal Bi2 and Bi2Te3 blocks, are reported. The end-members of this series are metallic Bi and semiconducting Bi2Te3; nine members of the series have been studied. The structures form an infinitely adaptive series and a unified structural description based on a modulated structure appr… ▽ More The structures and thermoelectric properties of the (Bi2)m(Bi2Te3)n homologous series, derived from stacking hexagonal Bi2 and Bi2Te3 blocks, are reported. The end-members of this series are metallic Bi and semiconducting Bi2Te3; nine members of the series have been studied. The structures form an infinitely adaptive series and a unified structural description based on a modulated structure approach is presented. The as-synthesized samples have thermopowers (S) that vary from n-type for Bi2Te3 to p-type for phases rich in Bi2 blocks but with some Bi2Te3 blocks present, to n-type again for Bi metal. The thermoelectric power factor (S2/rho) is highest for Bi metal (43 muW/K2 cm at 130 K), followed by Bi2Te3 (20 muW/K2 cm at 270 K), while Bi2Te (m:n = 5:2) and Bi7Te3 (m:n = 15:6) have 9 muW/K2 cm (at 240 K) and 11 muW/K2 (at 270 K), respectively. The results of doping studies with Sb and Se into Bi2Te are reported. △ Less

Submitted 20 March, 2007; originally announced March 2007.

Comments: accepted for publication in PRB

Sharp switching of the magnetization in Fe1/4TaS2

Authors: E. Morosan, H. W. Zandbergen, Lu Li, Minhyea Lee, J. G. Checkelsky, M. Heinrich, T. Siegrist, N. P. Ong, R. J. Cava

Abstract: Anisotropic magneto-transport measurements are reported on Fe1/4TaS2 single crystals grown by vapor transport. Both the magnetization and resistivity are extremely anisotropic, with the magnetic moments aligned parallel to the c crystallographic direction. Fe1/4TaS2 orders ferromagnetically below TC = 160 K and displays very sharp hysteresis loops in the ordered state for H||c. The corresponding… ▽ More Anisotropic magneto-transport measurements are reported on Fe1/4TaS2 single crystals grown by vapor transport. Both the magnetization and resistivity are extremely anisotropic, with the magnetic moments aligned parallel to the c crystallographic direction. Fe1/4TaS2 orders ferromagnetically below TC = 160 K and displays very sharp hysteresis loops in the ordered state for H||c. The corresponding magnetoresistance is negative, and it qualitatively reproduces the features observed in the M(H) data, by showing a sharp drop around the critical field Hs for the moment reversal. The magnetization switching time shows an unusual increase with increasing temperature. For field applied within the ab plane, the magnetization remains small and linear in field up to 5 T, and the magnetoresistance is positive and quadratic in field, with no visible hysteresis. The squareness of the H||c M(H) loops and the high critical field for the magnetization switch (Hs = 3.7 T at T = 2 K) allow us to classify Fe1/4TaS2 as a strong ferromagnet. △ Less

Submitted 14 January, 2007; originally announced January 2007.

Comments: Accepted to Phys. Rev. B

Unraveling electronic-structure features for metallic Na0.33CoO2 and charge-ordered Na0.5CoO2 by high-resolution electron energy-loss spectroscopy

Authors: R. J. Xiao, J. H. Chen, H. X. Yang, C. Ma, Q. Xu, H. W. Zandbergen, J. Q. Li

Abstract: Measurements by high-resolution electron energy-loss spectroscopy (HREELS) of NaxCoO2 reveal spectral features that differ remarkably between the metallic Na0.33CoO2 and the charge-ordered insulator Na0.5CoO2. Calculations by density functional theory plus Hubbard U (DFT+U) demonstrate that these differences arise essentially from the relatively greater strength of electron correlation in additi… ▽ More Measurements by high-resolution electron energy-loss spectroscopy (HREELS) of NaxCoO2 reveal spectral features that differ remarkably between the metallic Na0.33CoO2 and the charge-ordered insulator Na0.5CoO2. Calculations by density functional theory plus Hubbard U (DFT+U) demonstrate that these differences arise essentially from the relatively greater strength of electron correlation in addition to the crystal-field effect in Na0.5CoO2. The effective U values are estimated to be ~3.0eV for x=0.5 and ~1.0eV for x=0.33, respectively. The electronic structures for these correlation strengths give good interpretations for the physical properties observed in the materials. △ Less

Submitted 7 December, 2006; originally announced December 2006.

Comments: 13 pages, 4 figures

Structure and basic magnetic properties of the honeycomb lattice compounds Na2Co2TeO6 and Na3Co2SbO6

Authors: L. Viciu, Q. Huang, E. Morosan, H. W. Zandbergen, N. I. Greenbaum, T. McQueen, R. J. Cava

Abstract: The synthesis, structure, and basic magnetic properties of Na2Co2TeO6 and Na3Co2SbO6 are reported. The crystal structures were determined by neutron powder diffraction. Na2Co2TeO6 has a two-layer hexagonal structure (space group P6322) while Na3Co2SbO6 has a single-layer monoclinic structure (space group C2/m). The Co, Te, and Sb ions are in octahedral coordination, and the edge sharing octahedra… ▽ More The synthesis, structure, and basic magnetic properties of Na2Co2TeO6 and Na3Co2SbO6 are reported. The crystal structures were determined by neutron powder diffraction. Na2Co2TeO6 has a two-layer hexagonal structure (space group P6322) while Na3Co2SbO6 has a single-layer monoclinic structure (space group C2/m). The Co, Te, and Sb ions are in octahedral coordination, and the edge sharing octahedra form planes interleaved by sodium ions. Both compounds have full ordering of the Co2+ and Te6+/Sb5+ ions in the ab plane such that the Co2+ ions form a honeycomb array; the stacking of the honeycomb arrays differ in the two compounds. Both Na2Co2TeO6 and Na3Co2SbO6 reveal antiferromagnetic ordering at low temperatures, with a metamagnetic transition displayed by Na3Co2SbO6. △ Less

Submitted 26 September, 2006; originally announced September 2006.

Comments: 27 pages, 3 tables, 9 figures. submitted to J. of Solid State Chemistry

Ferromagnetism below 10 K in Mn doped BiTe

Authors: J. W. G. Bos, M. Lee, E. Morosan, H. W. Zandbergen, W. L. Lee, N. P. Ong, R. J. Cava

Abstract: Ferromagnetism is observed below 10 K in [Bi0.75Te0.125Mn0.125]Te. This material has the BiTe structure, which is made from the stacking of two Te-Bi-Te-Bi-Te blocks and one Bi-Bi block per unit cell. Crystal structure analysis shows that Mn is localized in the Bi2 blocks, and is accompanied by an equal amount of TeBi anti-site occupancy in the Bi2Te3 blocks. These TeBi anti-site defects greatly… ▽ More Ferromagnetism is observed below 10 K in [Bi0.75Te0.125Mn0.125]Te. This material has the BiTe structure, which is made from the stacking of two Te-Bi-Te-Bi-Te blocks and one Bi-Bi block per unit cell. Crystal structure analysis shows that Mn is localized in the Bi2 blocks, and is accompanied by an equal amount of TeBi anti-site occupancy in the Bi2Te3 blocks. These TeBi anti-site defects greatly enhance the Mn solubility. This is demonstrated by comparison of the [Bi1-xMnx]Te and [Bi1-2xTexMnx]Te series; in the former, the solubility is limited to x = 0.067, while the latter has xmax = 0.125. The magnetism in [Bi1-xMnx]Te changes little with x, while that for [Bi1-2xTexMnx]Te shows a clear variation, leading to ferromagnetism for x > 0.067. Magnetic hysteresis and the anomalous Hall Effect are observed for the ferromagnetic samples. △ Less

Submitted 20 September, 2006; originally announced September 2006.

Comments: Accepted for publication in Phys. Rev. B

Superconductivity in Mg10Ir19B16

Authors: T. Klimczuk, Q. Xu, E. Morosan, H. W. Zandbergen, R. J. Cava

Abstract: Mg10Ir19B16, a previously unreported compound in the Mg-Ir-B chemical system, is found to be superconducting at temperatures near 5 K. The fact that the compound exhibits a range of superconducting temperatures between 4 and 5 K suggests that a range of stoichiometries is allowed, though no structural evidence for this is observed. The compound has a large, noncentrosymmetric, body centered cubi… ▽ More Mg10Ir19B16, a previously unreported compound in the Mg-Ir-B chemical system, is found to be superconducting at temperatures near 5 K. The fact that the compound exhibits a range of superconducting temperatures between 4 and 5 K suggests that a range of stoichiometries is allowed, though no structural evidence for this is observed. The compound has a large, noncentrosymmetric, body centered cubic unit cell with a = 10.568 Angstrom, displaying a structure type for which no previous superconductors have been reported. △ Less

Submitted 25 August, 2006; originally announced August 2006.

Comments: submitted to PRB

Journal ref: Phys. Rev. B 74, 220502(R) (2006)

Superconductivity in Cu_xTiSe_2

Authors: E. Morosan, H. W. Zandbergen, B. S. Dennis, J. W. G. Bos, Y. Onose, T. Klimczuk, A. P. Ramirez, N. P. Ong, R. J. Cava

Abstract: Charge density waves (CDWs) are periodic modulations of the conduction electron density in solids. They are collective states that arise from intrinsic instabilities often present in low dimensional electronic systems. The layered dichalcogenides are the most well-studied examples, with TiSe_2 one of the first CDW-bearing materials known. The competition between CDW and superconducting collectiv… ▽ More Charge density waves (CDWs) are periodic modulations of the conduction electron density in solids. They are collective states that arise from intrinsic instabilities often present in low dimensional electronic systems. The layered dichalcogenides are the most well-studied examples, with TiSe_2 one of the first CDW-bearing materials known. The competition between CDW and superconducting collective electronic states at low temperatures has long been held and explored, and yet no chemical system has been previously reported where finely controlled chemical tuning allows this competition to be studied in detail. Here we report how, upon controlled intercalation of TiSe_2 with Cu to yield Cu_xTiSe_2, the CDW transition is continuously suppressed, and a new superconducting state emerges near x = 0.04, with a maximum T_c of 4.15 K found at x = 0.08. Cu_xTiSe_2 thus provides the first opportunity to study the CDW to Superconductivity transition in detail through an easily-controllable chemical parameter, and will provide new insights into the behavior of correlated electron systems. △ Less

Submitted 20 June, 2006; originally announced June 2006.

Comments: Accepted to Nature Physics

Crystal Structure and Elementary Properties of NaxCoO2 (x = 0.32, 0.5, 0.6, 0.75, and 0.92) in the Three-Layer NaCoO2 Family

Authors: L. Viciu, J. W. G. Bos, H. W. Zandbergen, Q. Huang, M. L. Foo, S. Ishiwata, A. P. Ramirez, M. Lee, N. P. Ong, R. J. Cava

Abstract: The crystal structures of the NaxCoO2 phases based on three-layer NaCoO2, with x=0.32, x=0.51, x=0.60, x=0.75 and x=0.92, determined by powder neutron diffraction, are reported. The structures have triangular CoO2 layers interleaved by sodium ions, and evolve with variation in Na content in a more complex way than has been observed in the two-layer NaxCoO2 system. The highest and lowest Na conta… ▽ More The crystal structures of the NaxCoO2 phases based on three-layer NaCoO2, with x=0.32, x=0.51, x=0.60, x=0.75 and x=0.92, determined by powder neutron diffraction, are reported. The structures have triangular CoO2 layers interleaved by sodium ions, and evolve with variation in Na content in a more complex way than has been observed in the two-layer NaxCoO2 system. The highest and lowest Na containing phases studied (x=0.92 and x=0.32) are trigonal, with three CoO2 layers per cell and octahedral Na ion coordination. The intermediate compositions have monoclinic structures. The x=0.75 compound has one CoO2 layer per cell, with Na in octahedral coordination and an incommensurate superlattice. The x=0.6 and x=0.5 phases are also single-layer, but the Na is found in trigonal prismatic coordination. The magnetic behavior of the phases is similar to that observed in the two-layer system. Both the susceptibility and the electronic contribution to the specific heat are largest for x=0.6. △ Less

Submitted 25 January, 2006; originally announced January 2006.

Comments: 24 pages, 14 figures, submitted to Phys.Rev. B

Ca_25Co_22O_56(OH)_28: a layered misfit compound

Authors: T. Klimczuk, H. W. Zandbergen, N. M. van der Pers, L. Viciu, V. L. Miller, M. -H. Lee, R. J. Cava

Abstract: The high pressure synthesis, structure and magnetic properties of Ca_25Co_22O_56(OH)_28 are reported. The compound has a misfit structure, consisting of double, square calcium oxide hydroxide rock-salt-like layers between hexagonal CoO_2 layers. The misfit compound crystallizes in the monoclinic space group C2/m, and can be characterized by the coexistence of two subsystems with common a=4.893(5… ▽ More The high pressure synthesis, structure and magnetic properties of Ca_25Co_22O_56(OH)_28 are reported. The compound has a misfit structure, consisting of double, square calcium oxide hydroxide rock-salt-like layers between hexagonal CoO_2 layers. The misfit compound crystallizes in the monoclinic space group C2/m, and can be characterized by the coexistence of two subsystems with common a=4.893(5)A, c=8.825(9)A and b=95.745(8) parameters, and different b parameters: b_RS=4.894(5)A, and b_HEX=2.809(3)A, for the rock-salt and hexagonal type planes respectively. The compound shows Curie-Weiss paramagnetism with an antiferromagnetic Weiss temperature of -43K and a reduced Co moment. Substantial deviations from Curie-Weiss behavior are seen below 50K with no indication of magnetic ordering. No superconductivity was observed down to a temperature of 2K. △ Less

Submitted 10 October, 2005; v1 submitted 6 October, 2005; originally announced October 2005.

Comments: axis labels Fig.5 revised

Journal ref: Materials Research Bulletin vol. 41 (2006) 1673-1680

Coupling between electronic and structural degrees of freedom in the triangular lattice conductor NaxCoO2

Authors: Q. Huang, M. L. Foo, R. A. Pascal Jr., J. W. Lynn, B. H. Toby, Tao He, H. W. Zandbergen, R. J. Cava

Abstract: The determination by powder neutron diffraction of the ambient temperature crystal structures of compounds in the NaxCoO2 family, for 0.3 < x <= 1.0, is reported. The structures consist of triangular CoO2 layers with Na ions distributed in intervening charge reservoir layers. The shapes of the CoO6 octahedra that make up the CoO2 layers are found to be critically dependent on the electron count… ▽ More The determination by powder neutron diffraction of the ambient temperature crystal structures of compounds in the NaxCoO2 family, for 0.3 < x <= 1.0, is reported. The structures consist of triangular CoO2 layers with Na ions distributed in intervening charge reservoir layers. The shapes of the CoO6 octahedra that make up the CoO2 layers are found to be critically dependent on the electron count and on the distribution of the Na ions in the intervening layers, where two types of Na sites are available. Correlation of the shapes of cobalt-oxygen octahedra, the Na ion positions, and the electronic phase diagram in NaxCoO2 is made, showing how structural and electronic degrees of freedom can be coupled in electrically conducting triangular lattice systems. △ Less

Submitted 23 June, 2004; originally announced June 2004.

Comments: 15 pages, 1 tables, 6 figures Submitted to Physical Review B

Sodium Ion Ordering in NaxCoO2

Authors: H. W. Zandbergen, M. L. Foo, Q. Xu, V. Kumar, R. J. Cava

Abstract: The layered sodium cobalt oxide NaxCoO2 is studied by electron diffraction for a wide range of sodium contents, 0.15<x<0.75. An extensive series of ordered Na ion-Na vacancy superlattices is found beyond the simple hexagonal average structure. The most strongly developed superlattice is found for the composition Na0.5CoO2, which displays Co3+/Co4+ charge ordering at low temperatures. The structu… ▽ More The layered sodium cobalt oxide NaxCoO2 is studied by electron diffraction for a wide range of sodium contents, 0.15<x<0.75. An extensive series of ordered Na ion-Na vacancy superlattices is found beyond the simple hexagonal average structure. The most strongly developed superlattice is found for the composition Na0.5CoO2, which displays Co3+/Co4+ charge ordering at low temperatures. The structural principle for some of the observed ordering schemes, particularly near x=0.5, is, surprisingly, the presence of lines of Na ions and vacancies rather than simply maximized Na-Na separations. △ Less

Submitted 8 March, 2004; originally announced March 2004.

Comments: 16 pages,13 figures

Low temperature phase transitions and crystal structure of Na0.5CoO2

Authors: Q. Huang, M. L. Foo, J. W. Lynn, H. W. Zandbergen, G. Lawes, Yayu Wang, B. H. Toby, A. P. Ramirez, N. P. Ong, R. J. Cava

Abstract: The crystal structure of Na0.5CoO2, determined by powder neutron diffraction, is reported. The structure consists of layers of edge-shared CoO6 octahedra in a triangular lattice, with Na ions occupying ordered positions in the interleaving planes. The Na ions form one-dimensional zigzag chains. Two types of Co ions, which differ only subtly in their coordination by oxygen, are also found in chai… ▽ More The crystal structure of Na0.5CoO2, determined by powder neutron diffraction, is reported. The structure consists of layers of edge-shared CoO6 octahedra in a triangular lattice, with Na ions occupying ordered positions in the interleaving planes. The Na ions form one-dimensional zigzag chains. Two types of Co ions, which differ only subtly in their coordination by oxygen, are also found in chains. Specific heat measurements show that the transitions observed at 87 K and 53 K in the resistivity and magnetic susceptibility are accompanied by changes in entropy. Electron diffraction studies suggest that the 87K transition may have a structural component. △ Less

Submitted 29 March, 2004; v1 submitted 9 February, 2004; originally announced February 2004.

Comments: 19 pages, 10 figures, submitted to Journal of Physics: Condensed Matter. Revised structural parameters on page 7

Charge-ordering, commensurability and metallicity in the phase diagram of layered Na(x)CoO(2)

Authors: Maw Lin Foo, Yayu Wang, Satoshi Watauchi, H. W. Zandbergen, Tao He, R. J. Cava, N. P. Ong

Abstract: The phase diagram of non-hydrated Na(x)CoO(2) has been determined by changing the Na content x using a series of chemical reactions. As x increases from 0.3, the ground state goes from a paramagnetic metal to a charge-ordered insulator (at x=1/2) to a `Curie-Weiss metal' (around 0.70), and finally to a weak-moment magnetically ordered state (x>0.75). The unusual properties of the state at 1/2 (i… ▽ More The phase diagram of non-hydrated Na(x)CoO(2) has been determined by changing the Na content x using a series of chemical reactions. As x increases from 0.3, the ground state goes from a paramagnetic metal to a charge-ordered insulator (at x=1/2) to a `Curie-Weiss metal' (around 0.70), and finally to a weak-moment magnetically ordered state (x>0.75). The unusual properties of the state at 1/2 (including particle-hole symmetry at low T and enhanced thermal conductivity) are described. The strong coupling between the Na ions and the holes is emphasized. △ Less

Submitted 25 February, 2004; v1 submitted 5 December, 2003; originally announced December 2003.

Comments: 4 pages with 3 figures, changed content

Journal ref: Phys. Rev. Lett. 92, 247001 (2004)

Chemical Instability of the Cobalt Oxyhydrate Superconductor under Ambient Conditions

Authors: M. L. Foo, R. E. Schaak, V. L. Miller, T. Klimczuk, N. S. Rogado, Yayu Wang, G. C. Lau, C. Craley, H. W. Zandbergen, N. P. Ong, R. J. Cava

Abstract: The layered sodium cobalt oxyhydrate superconductor Na0.3CoO2*1.4H2O is shown through X-ray diffraction and thermogravimetric studies to be one of a series of hydrated phases of Na0.3CoO2. Further, it is shown that the material is exceptionally sensitive to both temperature and humidity near ambient conditions, easily dehydrating to a non-superconducting lower hydrate. The observation of this st… ▽ More The layered sodium cobalt oxyhydrate superconductor Na0.3CoO2*1.4H2O is shown through X-ray diffraction and thermogravimetric studies to be one of a series of hydrated phases of Na0.3CoO2. Further, it is shown that the material is exceptionally sensitive to both temperature and humidity near ambient conditions, easily dehydrating to a non-superconducting lower hydrate. The observation of this stable lower hydrate with c=13.8 angstroms implies that the superconductivity turns on in this system between CoO2 layer spacings of 6.9 and 9.9 angstroms at nominally constant chemical doping. △ Less

Submitted 21 April, 2003; originally announced April 2003.

Comments: 10 pages and 4 figures

Journal ref: Solid State Communications, 127 (2003) 33

Flux line lattice structure and behaviour in anti-phase boundary free vicinal YBa2Cu3O7-d thin films

Authors: J. H. Durrell, S. H. Mennema, Ch. Jooss, G. Gibson, Z. H. Barber, H. W. Zandbergen, J. E. Evetts

Abstract: Field angle dependent critical current, magneto-optical microscopy, and high resolution electron microscopy studies have been performed on YBa2Cu3O7-d thin films grown on mis-cut substrates. High resolution electron microscopy images show that the films studied exhibited clean epitaxial growth with a low density of anti-phase boundaries and stacking faults. Any anti-phase boundaries (APBs) forme… ▽ More Field angle dependent critical current, magneto-optical microscopy, and high resolution electron microscopy studies have been performed on YBa2Cu3O7-d thin films grown on mis-cut substrates. High resolution electron microscopy images show that the films studied exhibited clean epitaxial growth with a low density of anti-phase boundaries and stacking faults. Any anti-phase boundaries (APBs) formed near the film substrate interface rapidly healed rather than extending through the thickness of the film. Unlike vicinal films grown on annealed substrates, which contain a high density of anti-phase boundaries, magneto optical imaging showed no filamentary flux penetration in the films studied. The flux penetration is, however, asymmetric. This is associated with intrinsic pinning of flux strings by the tilted a-b planes and the dependence of the pinning force on the angle between the local field and the a-b planes. Field angle dependent critical current measurements exhibited the striking vortex channelling effect previously reported in vicinal films. By combining the results of three complementary characterisation techniques it is shown that extended APB free films exhibit markedly different critical current behaviour as compared to APB rich films. This is attributed to the role of APB sites as strong pinning centres for Josephson string vortices between the a-b planes. △ Less

Submitted 27 January, 2003; originally announced January 2003.

Comments: Submitted to Journal of Applied Physics

Journal ref: Durrell et al (2003), Journal of Applied Physics, 93 (12), 9869

Structure and Superconductivity in Zr-Stabilized, Nonstoichiometric Molybdenum Diboride

Authors: L. E. Muzzy, M. Avdeev, G. Lawes, M. K. Haas, H. W. Zandbergen, A. P. Ramirez, J. D. Jorgensen, R. J. Cava

Abstract: The structure and physical properties of the Zr-stabilized, nonstoichiometric molybdenum diboride superconductor are reported. Good quality material of the diboride structure type can only be obtained by partial substitution of Zr for Mo, and the quenching of melts. The phase is best made with boron in excess of the ideal 2:1 boron to metal ratio. Powder neutron diffraction measurements show tha… ▽ More The structure and physical properties of the Zr-stabilized, nonstoichiometric molybdenum diboride superconductor are reported. Good quality material of the diboride structure type can only be obtained by partial substitution of Zr for Mo, and the quenching of melts. The phase is best made with boron in excess of the ideal 2:1 boron to metal ratio. Powder neutron diffraction measurements show that the non-stoichiometry is accommodated by atom deficiency in the metal layers. The diboride structure type exists for (Mo.96Zr.04)xB2 for x between 0.85 and 1.0. Electron diffraction shows that the stoichiometric material, x=1, has a significant number of stacking faults. Tc increases from 5.9 to 8.2K with the introduction of metal vacancies. Resistivity measurements indicate that (Mo.96Zr.04).88B2 is a bad metal, and specific heat measurements show that gamma= 4.4 mJ/mol K2, and that deltaC/gammaTc = 1.19. Preliminary boron isotope effect measurements indicate an exponent 0.11(5). Analysis of the data in terms of the electronic structure is reported, allowing an estimate of the electron-phonon coupling constant, lamda = 0.1-0.3, making these weak-coupling superconductors. Preliminary characterizations of the superconductivity in the related phases NbxB2 and (Mo.96X.04).85B2 for X=Ti, and Hf are reported. △ Less

Submitted 31 May, 2002; originally announced June 2002.

Comments: 24 pages with 16 figures, submitted to Physica C

The complex superstructure in Mg1-xAlxB2 at x~0.5

Authors: H. W. Zandbergen, M. Y. Wu, H. Jiang, M. A. Hayward, M. K. Haas, R. J. Cava

Abstract: Electron diffraction and high resolution microscopy have been performed on Mg1-xAlxB2 with x~0.5. This composition displays a superstructure with a repeat period of exactly 2c along the c axis and about 10 nm in the a-b plane. The superstructure results in ring-shaped superreflections in the diffraction pattern. Irradiation by a strong electron beam results in a loss of the superstructure and a… ▽ More Electron diffraction and high resolution microscopy have been performed on Mg1-xAlxB2 with x~0.5. This composition displays a superstructure with a repeat period of exactly 2c along the c axis and about 10 nm in the a-b plane. The superstructure results in ring-shaped superreflections in the diffraction pattern. Irradiation by a strong electron beam results in a loss of the superstructure and a decrease of about 1% in the c lattice parameter. In-situ heating and cooling on the other hand showed that the superstructure is stable from 100 K to 700 K. Possible origins for the superstructure are proposed. △ Less

Submitted 17 September, 2001; originally announced September 2001.

Superconductivity in the non-oxide Perovskite MgCNi3

Authors: T. He, Q. Huang, A. P. Ramirez, Y. Wang, K. A. Regan, N. Rogado, M. A. Hayward, M. K. Haas, J. S. Slusky, K. Inumaru, H. W. Zandbergen, N. P. Ong, R. J. Cava

Abstract: The oxide perovskites are a large family of materials with many important physical properties. Of particular interest has been the fact that this structure type provides an excellent structural framework for the existence of superconductivity. The high Tc copper oxides are the most famous examples of superconducting perovskites, but there are many others [1]. Intermetallic compounds have been th… ▽ More The oxide perovskites are a large family of materials with many important physical properties. Of particular interest has been the fact that this structure type provides an excellent structural framework for the existence of superconductivity. The high Tc copper oxides are the most famous examples of superconducting perovskites, but there are many others [1]. Intermetallic compounds have been the source of many superconducting materials in the past, but they have been eclipsed in recent years by the perovskite oxides. The recent discovery of superconductivity in MgB2 [2] suggests that intermetallic compounds with simple structure types are worth serious reconsideration as sources of new superconducting materials. Here we report the observation of superconductivity at 8 K in the perovskite structure intermetallic compound MgCNi3, linking what appear at first sight to be mutually exclusive classes of superconducting materials. The observation of superconductivity in MgCNi3 indicates that MgB2 will not be the only one of its kind within the chemical paradigm that it suggests for new superconducting materials. △ Less

Submitted 14 March, 2001; originally announced March 2001.

Loss of superconductivity and structural transition in Mg1-xAlxB2

Authors: J. S. Slusky, N. Rogado, K. A. Regan, M. A. Hayward, P. Khalifah, T. He, K. Inumaru, S. Loureiro, M. K. Haas, H. W. Zandbergen, R. J. Cava

Abstract: The basic magnetic and electronic properties of most binary compounds have been well known for decades. Therefore the recent announcement of superconductivity at 39 K in the simple binary ceramic compound MgB2 is surprising. This compound, available from common chemical suppliers, and used as a starting material for chemical metathesis reactions, has been known and structurally characterized sin… ▽ More The basic magnetic and electronic properties of most binary compounds have been well known for decades. Therefore the recent announcement of superconductivity at 39 K in the simple binary ceramic compound MgB2 is surprising. This compound, available from common chemical suppliers, and used as a starting material for chemical metathesis reactions, has been known and structurally characterized since the mid 1950's. Here we show that the addition of electrons to MgB2 through partial substitution of Al for Mg results in the loss of superconductivity. Associated with the Al substitution is a subtle but distinct structural transition, reflected in the partial collapse of the spacing between boron layers near 10% Al content. This indicates that superconducting MgB2 is poised very near a structural instability at slightly higher electron concentrations. △ Less

Submitted 14 February, 2001; originally announced February 2001.

Comments: 4 pages, 3 figures

Strain release of (La,Ca)MnO3 thin films by YBa2Cu3O7-d

Authors: Z. Q. Yang, R. Hendrikx, Y. Qin, H. W. Zandbergen, J. Aarts

Abstract: La1-xCaxMnO3 (x = 0.3; LCMO) films of different thickness were sputter-deposited on SrTiO3(100) (STO) single crystal substrates with and without YBa2Cu3O7-d (YBCO) as template layer. The electric and magnetic properties and the microstructure of the films were studied. Clear differences in the out-of-plane lattice parameter and the temperature of the metal-insulator transition show that the YBCO… ▽ More La1-xCaxMnO3 (x = 0.3; LCMO) films of different thickness were sputter-deposited on SrTiO3(100) (STO) single crystal substrates with and without YBa2Cu3O7-d (YBCO) as template layer. The electric and magnetic properties and the microstructure of the films were studied. Clear differences in the out-of-plane lattice parameter and the temperature of the metal-insulator transition show that the YBCO buffer layer is very effective in relaxing the strain of the LCMO films, which is quite difficult to release in LCMO films directly deposited on STO. Use of such buffer layers for strain release may prove to be a quite general tool. △ Less

Submitted 2 February, 2001; originally announced February 2001.

Comments: 3 pages, 4 figures, submitted to Appl. Phys. Lett