Showing 1–50 of 54 results for author: Yamashita, A

Huge anisotropic magneto-thermal switching in high-purity polycrystalline compensated metals

Authors: Poonam Rani, Yuto Watanabe, Takuma Shiga, Yuya Sakuraba, Hikaru Takeda, Minoru Yamashita, Ken-ichi Uchida, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: Magneto-thermal transport is a promising physical property for thermal management applications. Magneto-thermal switching enables active control of heat flows, and a high switching ratio is desirable for improving performance. Here, we report on the observation of a huge magneto-thermal switching (MTS) effect in high-purity (5N) Pb polycrystalline wires, where magnetic fields perpendicular to the… ▽ More Magneto-thermal transport is a promising physical property for thermal management applications. Magneto-thermal switching enables active control of heat flows, and a high switching ratio is desirable for improving performance. Here, we report on the observation of a huge magneto-thermal switching (MTS) effect in high-purity (5N) Pb polycrystalline wires, where magnetic fields perpendicular to the heat current direction are applied at low temperatures. At T = 3 K and B = 0.1 T, the measured thermal conductivity (\k{appa}) of the Pb wire is about 2500 W m-1 K-1 but is reduced to ~150 and ~5 W m-1 K-1 at B = 1 and 9 T, respectively. This strong suppression is attributed to magnetoresistance in compensated metals. Although the huge magnetoresistance has been studied in single crystals with field along the selected orbitals, our results demonstrate that a huge MTS can similarly be realized even in flexible polycrystalline wires. This finding highlights the practical potential of magneto-thermal control in low-temperature thermal management, including applications in space environments where temperatures are around 3 K. △ Less

Submitted 31 May, 2025; originally announced June 2025.

Comments: 20 pages, 4 figures. SI

Topology meets time-reversal symmetry breaking in FeSe$_{1-x}$Te$_{x}$ superconductor

Authors: M. Roppongi, Y. Cai, K. Ogawa, S. Liu, G. Q. Zhao, M. Oudah, T. Fujii, K. Imamura, S. Fang, K. Ishihara, K. Hashimoto, K. Matsuura, Y. Mizukami, M. Pula, C. Young, I. Markovic, D. A. Bonn, T. Watanabe, A. Yamashita, Y. Mizuguchi, G. M. Luke, K. M. Kojima, Y. J. Uemura, T. Shibauchi

Abstract: Time-reversal symmetry breaking (TRSB) in magnetic topological insulators induces a Dirac gap in the topological surface state (TSS), leading to exotic phenomena such as the quantum anomalous Hall effect. Yet, the interplay between TRSB and topology in superconductors remains underexplored due to limited suitable materials. Here we employ zero-field muon spin relaxation ($μ$SR) as a sensitive prob… ▽ More Time-reversal symmetry breaking (TRSB) in magnetic topological insulators induces a Dirac gap in the topological surface state (TSS), leading to exotic phenomena such as the quantum anomalous Hall effect. Yet, the interplay between TRSB and topology in superconductors remains underexplored due to limited suitable materials. Here we employ zero-field muon spin relaxation ($μ$SR) as a sensitive probe of TRSB to map out the electronic phase diagrams of iron-chalcogenide superconductors FeSe$_{1-x}$Te$_{x}$. For the Te composition $x=0.64$ with the highest superconducting transition temperature $T_{\rm c}=14.5$ K, which is known to host a TSS and Majorana zero modes within vortices, we detect spontaneous magnetic fields below $T_{\rm c}$ distinct from a magnetic order. This signifies a TRSB superconducting state in the bulk, revealing the convergence of unconventional TRSB superconductivity with topologically nontrivial electronic structures in FeSe$_{1-x}$Te$_{x}$. Given the relatively high $T_{\rm c}$ and the tunability of the Fermi level through chemical substitution, iron-chalcogenide superconductors offer an intriguing platform for investigating the synergy between topological superconductivity and TRSB. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 20 pages, 4 figures

Investigation of superconducting gap of high-entropy telluride AgInSnPbBiTe5

Authors: Asato Seshita, Hirotaka Okabe, Riad Kasem, Yuto Watanabe, Jumpei G. Nakamura, Shoichiro Nishimura, Kensei Terashima, Ryo Matsumoto, Yoshihiko Takano, Aichi Yamashita, Masaki Fujita, Yoshikazu Mizuguchi

Abstract: We performed transverse-field muon spin relaxation/rotation (TF-μSR) on a high-entropy-type (HE-type) superconductor AgInSnPbBiTe5. The emergence of bulk superconducting states was confirmed from magnetic susceptibility, specific heat, and μSR. The superconducting gap 2Δ(0) estimated from μSR was clearly larger than that expected from conventional weak-coupling phonon-mediated model, suggesting th… ▽ More We performed transverse-field muon spin relaxation/rotation (TF-μSR) on a high-entropy-type (HE-type) superconductor AgInSnPbBiTe5. The emergence of bulk superconducting states was confirmed from magnetic susceptibility, specific heat, and μSR. The superconducting gap 2Δ(0) estimated from μSR was clearly larger than that expected from conventional weak-coupling phonon-mediated model, suggesting the strong-coupling nature of superconductivity. In addition, a long penetration depth of 3.21(7) μm was obtained. The strong-coupling nature of superconductivity and the long penetration depth are similar to the trends observed in the other HE-type superconductors (HE alloys and transition-metal zirconides), which may be universal feature of HE-type superconductors. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Comments: 14 pages, 4 figures, Supplementary information

Nonvolatile magneto-thermal switching driven by vortex trapping in commercial In-Sn solder

Authors: Poonam Rani, Takumi Murakami, Yuto Watanabe, Hossein Sepehri-Amin, Hiroto Arima, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: Magneto-thermal switching (MTS) is a key technology for efficient thermal management. Recently, large MTS with nonvolatility has been observed in Sn-Pb solders [H. Arima et al., Commun. Mater. 5, 34 (2024)] where phase separation, different superconducting transition temperature (Tc) of Sn and Pb, and magnetic-flux trapping are the causes of the nonvolatile MTS. To further understand the mechanism… ▽ More Magneto-thermal switching (MTS) is a key technology for efficient thermal management. Recently, large MTS with nonvolatility has been observed in Sn-Pb solders [H. Arima et al., Commun. Mater. 5, 34 (2024)] where phase separation, different superconducting transition temperature (Tc) of Sn and Pb, and magnetic-flux trapping are the causes of the nonvolatile MTS. To further understand the mechanism and to obtain the strategy for enhancing switching ratio, exploration of new phase-separated superconductors with nonvolatile MTS is needed. Here, we show that the In52-Sn48 commercial solder is a phase-separated superconducting composite with two Tc and traps vortices after field cooling. A clear signature of nonvolatile MTS was observed at T = 2.5 K. From specific heat analyses, we conclude that the vortices are mainly trapped in the lower-Tc phase (γ-phase) after field cooling, which is the evidence that vortex trapping also works on achieving nonvolatile MTS in phase-separated superconducting composites. △ Less

Submitted 27 August, 2024; originally announced August 2024.

Comments: 14 pages, 5 figures

Journal ref: Appl. Phys. Express 18 033001 (2025)

Influence of trapped magnetic field of Sn-Pb solders on electrical resistivity measurement: an example of superconducting transition of Sn

Authors: Takumi Ichikawa, Yuto Watanabe, Takumi Murakami, Poonam Rani, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: We examined the affection of the flux-trapped states of Sn60-Pb40 solders on superconducting properties of a Sn wire. The temperature dependence of electrical resistivity at H = 0 Oe after zero-field cooling (ZFC) showed a sharp superconducting transition at T = 3.7 K. In contrast, that after field cooling (FC) resulted in broadening of the transition. The difference between ZFC and FC data eviden… ▽ More We examined the affection of the flux-trapped states of Sn60-Pb40 solders on superconducting properties of a Sn wire. The temperature dependence of electrical resistivity at H = 0 Oe after zero-field cooling (ZFC) showed a sharp superconducting transition at T = 3.7 K. In contrast, that after field cooling (FC) resulted in broadening of the transition. The difference between ZFC and FC data evidences critical affection of trapped fluxes at solders on superconducting states. We propose that, in electrical measurements where magnetic fields of several hundred Oe are critical, field experience should be seriously considered when using solders. △ Less

Submitted 16 July, 2024; v1 submitted 10 July, 2024; originally announced July 2024.

Comments: 11 pages, 4 figures, supplementary data

Specific heat analyses on optical-phonon-derived uniaxial negative thermal expansion system $Tr$Zr$_{2}$ ($Tr$ = Fe and Co$_{1-x}$Ni$_{x}$)

Authors: Yuto Watanabe, Ceren Tayran, Md. Riad Kasem, Aichi Yamashita, Mehmet Çakmak, Takayoshi Katase, Yoshikazu Mizuguchi

Abstract: Recently, huge uniaxial negative thermal expansion (NTE) along a $c$-axis has been observed in transition-metal ($Tr$) zirconides $Tr$Zr$_{2}$ with a tetragonal CuAl$_{2}$-type structure. In a recent study on FeZr$_{2}$ [M. Xu et al., Nat. Commun. 14, 4439 (2023)], the importance of optical phonons to the emergence of the $c$-axis NTE in FeZr$_{2}$ has been proposed. In this study, the physical pr… ▽ More Recently, huge uniaxial negative thermal expansion (NTE) along a $c$-axis has been observed in transition-metal ($Tr$) zirconides $Tr$Zr$_{2}$ with a tetragonal CuAl$_{2}$-type structure. In a recent study on FeZr$_{2}$ [M. Xu et al., Nat. Commun. 14, 4439 (2023)], the importance of optical phonons to the emergence of the $c$-axis NTE in FeZr$_{2}$ has been proposed. In this study, the physical properties of $Tr$Zr$_{2}$ ($Tr$ = Fe and Co$_{1-x}$Ni$_{x}$) have been studied by specific heat, sound velocity measurements, and theoretical phonon calculations to discuss the importance of optical phonons to the emergence of the $c$-axis NTE in CoZr$_{2}$ and FeZr$_{2}$. From analyses of lattice specific heat, we found that Ni substitution results in a systematic decrease in oscillator strength for the Einstein modes with 8.74 meV (CoZr$_{2}$). From phonon calculations, the low-energy optical phonon branches at the $Γ$ point were observed for CoZr$_{2}$ and FeZr$_{2}$ with $c$-axis NTE, but not in NiZr$_{2}$ with positive thermal expansion. The enhancement of phonon density of states near the above-mentioned optical phonon energy in CoZr$_{2}$ and FeZr$_{2}$ is consistent with the specific heat analyses. We propose the importance of the low-energy optical phonons to the emergence of the $c$-axis NTE in TrZr$_{2}$. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 14 pages, 9 figures, and 3 tables

Superconducting properties and electronic structure of CuAl2-type transition-metal zirconide Fe1-xNixZr2

Authors: Ryunosuke Shimada, Yuto Watanabe, Lorenzo Tortora, Giovanni Tomassucci, Muammer Yasin Hacisalihoǧlu, Hiroto Arima, Aichi Yamashita, Akira Miura, Chikako Moriyoshi, Naurang L. Saini, Yoshikazu Mizuguchi

Abstract: CuAl2-type transition-metal (Tr) zirconides are superconductor family, and the Tr-site element substitution largely modifies its transition temperature (Tc). Here, we synthesized polycrystalline samples of Fe1-xNixZr2 by arc melting. From magnetic susceptibility measurements, bulk superconductivity was observed for 0.4 < x < 0.8, and the highest Tc of 2.8 K was observed for x = 0.6. Specific heat… ▽ More CuAl2-type transition-metal (Tr) zirconides are superconductor family, and the Tr-site element substitution largely modifies its transition temperature (Tc). Here, we synthesized polycrystalline samples of Fe1-xNixZr2 by arc melting. From magnetic susceptibility measurements, bulk superconductivity was observed for 0.4 < x < 0.8, and the highest Tc of 2.8 K was observed for x = 0.6. Specific heat measurements were also performed, bulk superconductivity was observed for 0.4 < x < 0.8, and the highest Tc of 2.6 K was observed for x = 0.6. The obtained superconductivity phase diagram exhibits dome-shaped trend, which is similar to unconventional superconductors, where magnetic fluctuations are essential for superconductivity. In addition, from the c/a lattice constant ratio analysis, we show the possible relationship between the suppression of bulk superconductivity in the Ni-rich compositions and a collapsed tetragonal transition. △ Less

Submitted 13 July, 2024; v1 submitted 7 May, 2024; originally announced May 2024.

Comments: 16 pages, 8 figures, SI

High entropy effect on thermoelectric properties of nonequilibrium cubic phase of AgBiSe2-2xSxTex with x = 0-0.6

Authors: Asato Seshita, Aichi Yamashita, Takayoshi Katase, Yoshikazu Mizuguchi

Abstract: Silver bismuth diselenide (AgBiSe2) has much attention as an efficient thermoelectric material due to its low thermal conductivity. However, AgBiSe2 exhibits multiple crystal structural transitions with temperature, and high thermoelectric performance was realized only in high-temperature cubic phase. We previously reported the stabilization of cubic phase in AgBiSe2-2xSxTex with x = 0.6-0.8 at ro… ▽ More Silver bismuth diselenide (AgBiSe2) has much attention as an efficient thermoelectric material due to its low thermal conductivity. However, AgBiSe2 exhibits multiple crystal structural transitions with temperature, and high thermoelectric performance was realized only in high-temperature cubic phase. We previously reported the stabilization of cubic phase in AgBiSe2-2xSxTex with x = 0.6-0.8 at room temperature by high-entropy-alloy (HEA) approach. The cubic HE-type AgBiSe0.8S0.6Te0.6 achieved a high ZT value of 0.8 at 748 K. In this paper, we succeeded in stabilizing the cubic phase in AgBiSe2-2xSxTex with x = 0-0.6 by ice-quenching method, and investigated the HE effect on the thermoelectric properties. Cubic AgBiSe2-2xSxTex exhibited n-type conductivity from 300 K to 10 K. We found that electronic conductivity was largely increased around room temperature with increasing the amount of S and Te, although carrier concentration showed almost the same values. The S and Te substitutions induced the variation of band structure, resulting in the carrier mobility enhancement. Furthermore, thermal conducutivity showed reduction tendency with increasing the amount of S and Te due to enhancement of phonon scattering. Simultaneous electronic conductivity increase and thermal conductivity reduction resulted in the systematic improvement of the ZT values for HE-type cubic AgBiSe2-2xSxTex. △ Less

Submitted 4 May, 2024; originally announced May 2024.

Comments: 21 pages, 7 figures

Stabilization and high thermoelectric performance of high-entropy-type cubic AgBi(S, Se, Te)2

Authors: Asato Seshita, Aichi Yamashita, Takeshi Fujita, Takayoshi Katase, Akira Miura, Yuki Nakahira, Chikako Moriyoshi, Yoshihiro Kuroiwa, Yoshikazu Mizuguchi

Abstract: As thermoelectric generators can convert waste heat into electricity, they play an important role in energy harvesting. The metal chalcogenide AgBiSe2 is one of the high-performance thermoelectric materials with low lattice thermal conductivity (klat), but it exhibits temperature-dependent crystal structural transitions from hexagonal to rhombohedral, and finally a cubic phase as the temperature r… ▽ More As thermoelectric generators can convert waste heat into electricity, they play an important role in energy harvesting. The metal chalcogenide AgBiSe2 is one of the high-performance thermoelectric materials with low lattice thermal conductivity (klat), but it exhibits temperature-dependent crystal structural transitions from hexagonal to rhombohedral, and finally a cubic phase as the temperature rises. The high figure-of-merit ZT is obtained only for the high-temperature cubic phase. In this study, we utilized the high-entropy-alloy (HEA) concept for AgBiSe2 to stabilize the cubic phase throughout the entire temperature range with enhanced thermoelectric performance. We synthesized high-entropy-type AgBiSe2-2xSxTex bulk polycrystals and realized the stabilization of the cubic phase from room temperature to 800 K for x > 0.6. The ultra-low klat at of 0.30 Wm^-1K^-1 and the high peak ZT 0.9 at around 750 K were realized for cubic AgBiSe2-2xSxTex without carrier tuning. In addition, the average ZT value of x = 0.6 and 0.7 for the temperature range of 360-750 K increased to 0.38 and 0.40, respectively, which are comparable to the highest previously reported values. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: 44 pages, 8 figures

Vortex formation and exotic superconducting states in field-cooled Sn-Pb solders

Authors: Takumi Murakami, Md. Riad Kasem, Hiroto Arima, Yuto Watanabe, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: Formation of vortices is a typical phenomenon of type-II superconductors under magnetic fields (H). In contrast, type-I superconductors do not host vortices because of their Meissner state. As rare cases, vortices have been observed in intermediate states of type-I superconductors; in addition, the recent observation of type-II superconductivity with vortices in a (originally type-I) Pb crystal fi… ▽ More Formation of vortices is a typical phenomenon of type-II superconductors under magnetic fields (H). In contrast, type-I superconductors do not host vortices because of their Meissner state. As rare cases, vortices have been observed in intermediate states of type-I superconductors; in addition, the recent observation of type-II superconductivity with vortices in a (originally type-I) Pb crystal film at extremely low temperature (T) under H has opened new pathway to study vortex physics. However, thermodynamic characteristics of such type-II-like superconducting states with vortices in originally type-I element superconductors have not been detected because of the lack of bulk example. In this study, we investigated superconducting states of phase-separated Sn-Pb solders using specific heat and magnetization to reveal magnetic-flux-trapping mechanisms. Here, we show that Sn islands in the Sn-Pb solders exhibit type-II-like superconducting states with vortices when the solders host extremely high magnetic fluxes after field cooling. Furthermore, with increasing T, the amount of trapped flux decreases, and the driving force of the magnetic flux changes from type-II superconducting states of Sn to supercurrent of Pb regions surrounding the Sn islands. The field-cooled Sn-Pb solders are rich in physics of bulk vortex formation and anomalously enhanced supercurrent in element (originally type-I) superconductors. △ Less

Submitted 30 April, 2024; v1 submitted 3 March, 2024; originally announced March 2024.

Comments: We found a problem on the analysis of specific heat data because of possible self-heating of the measured solders when flux reduction. We will resubmit the data after careful analyses

Observation of superconductivity and enhanced upper critical field of $η$-carbide-type oxide Zr${_\mathrm{4}}$Pd$_{\mathrm{2}}$O

Authors: Yuto Watanabe, Akira Miura, Chikako Moriyoshi, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: We report the first observation of bulk superconductivity of a $η$-carbide-type oxide Zr$_{4}$Pd$_{2}$O. The crystal structure and the superconducting properties were studied through synchrotron X-ray diffraction, magnetization, electrical resistivity, and specific heat measurement. The superconducting transition was observed at $T_{\mathrm{c}}$ = 2.73 K. Our measurement revealed that the $η$-carb… ▽ More We report the first observation of bulk superconductivity of a $η$-carbide-type oxide Zr$_{4}$Pd$_{2}$O. The crystal structure and the superconducting properties were studied through synchrotron X-ray diffraction, magnetization, electrical resistivity, and specific heat measurement. The superconducting transition was observed at $T_{\mathrm{c}}$ = 2.73 K. Our measurement revealed that the $η$-carbide-type oxide superconductor Zr$_{4}$Pd$_{2}$O shows an enhanced upper critical field ${μ_{\mathrm{0}}H_{\mathrm{c2}}\mathrm{(0)}}$ = 6.72 T, which violates the Pauli-Clogston limit ${μ_{\mathrm{0}}H_{\mathrm{P}}}$ = 5.29 T. On the other hand, we found that the enhanced upper critical field is absent in a Rh analogue Zr$_{4}$Rh$_{2}$O. The large ${μ_{\mathrm{0}}H_{\mathrm{c2}}\mathrm{(0)}}$ of Zr$_{4}$Pd$_{2}$O would be raised from strong spin-orbit coupling with Pd-4$d$ electrons. The discovery of new superconducting properties for Zr$_{4}$Pd$_{2}$O would shed light on the further development of $η$-carbide-type oxide superconductors. △ Less

Submitted 17 November, 2023; originally announced November 2023.

Comments: 12 pages, 4 figures, 3 tables

Journal ref: Sci. Rep. 13, 22458 (2023)

Pressure-induced volumetric negative thermal expansion in CoZr2 superconductor

Authors: Yuto Watanabe, Hiroto Arima, Saori Kawaguchi-Imada, Hirokazu Kadobayashi, Kenta Oka, Hidetomo Usui, Ryo Matsumoto, Yoshihiko Takano, Takeshi Kawahata, Chizuru Kawashima, Hiroki Takahashi, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: We investigate the thermal expansion and superconducting properties of a CuAl2-type (tetragonal) superconductor CoZr2 under high pressures. We perform high-pressure synchrotron X-ray diffraction in a pressure range of 2.9 GPa < P < 10.4 GPa and discover that CoZr2 exhibits volumetric negative thermal expansion under high pressures. Although the uniaxial positive thermal expansion (PTE) along the a… ▽ More We investigate the thermal expansion and superconducting properties of a CuAl2-type (tetragonal) superconductor CoZr2 under high pressures. We perform high-pressure synchrotron X-ray diffraction in a pressure range of 2.9 GPa < P < 10.4 GPa and discover that CoZr2 exhibits volumetric negative thermal expansion under high pressures. Although the uniaxial positive thermal expansion (PTE) along the a-axis is observed under ambient pressure, that is suppressed by pressure, while the large uniaxial negative thermal expansion (NTE) along the c-axis is maintained under the pressure regime. As a result of a combination of the suppressed uniaxial PTE along the a-axis and uniaxial NTE along the c-axis, volumetric negative thermal expansion is achieved under high pressure in CoZr2. The mechanisms of volumetric NTE would be based on the flexible crystal structure caused by the soft Co-Co bond as seen in the iso-structural compound FeZr2, which exhibits uniaxial NTE along the c-axis. We also perform high-pressure electrical resistance measurements of CoZr2 to confirm the presence of superconductivity under the examined pressure regime in the range of 0.03 GPa < P < 41.9 GPa. We confirm the presence of superconductivity under all pressures and observe dome-like shape pressure dependence of superconducting transition temperature. Because of the coexistence of two phenomena, which are volumetric NTE and superconductivity, in CoZr2 under high pressure, the coexistence would be achievable under ambient pressure by tuning chemical compositions after our present observation. △ Less

Submitted 24 October, 2023; v1 submitted 22 October, 2023; originally announced October 2023.

Comments: 22 pages, 7 figures, supporting information

Absence of Tc-Pinning Phenomenon Under High Pressure in High-Entropy REO0.5F0.5BiS2 Layered Superconductor

Authors: Yoshikazu Mizuguchi, Kazuki Yamane, Ryo Matsumoto, Kazuhisa Hoshi, Aichi Yamashita, Akira Miura, Yuki Nakahira, Hirokazu Kadobayashi, Saori I. Kawaguchi, Yoshihiko Takano

Abstract: Recently, robustness of superconductivity (transition temperature, Tc) under high pressures has been observed in high-entropy alloy (HEA), bcc-type Ti-Zr-Hf-Nb-Ta, and HEA-type compounds (Ag,In,Sn,Pb,Bi)Te with a NaCl-type structure. Since those materials have three-dimensional crystal structure, investigation on the pressure dependence of Tc of low-dimensional materials is needed to understand th… ▽ More Recently, robustness of superconductivity (transition temperature, Tc) under high pressures has been observed in high-entropy alloy (HEA), bcc-type Ti-Zr-Hf-Nb-Ta, and HEA-type compounds (Ag,In,Sn,Pb,Bi)Te with a NaCl-type structure. Since those materials have three-dimensional crystal structure, investigation on the pressure dependence of Tc of low-dimensional materials is needed to understand the phenomena. Here, we investigated the superconducting properties and the crystal structure of BiS2-based layered system REO0.5F0.5BiS2. Although the robustness of Tc was induced in MTe with increasing M-site configurational entropy, the increase in RE-site configurational entropy does not induce robustness of Tc under high pressures in REO0.5F0.5BiS2. The crystal structure of HEA-type REO0.5F0.5BiS2 was confirmed as monoclinic P21/m, which is the same space group as the zero-entropy counterpart LaO0.5F0.5BiS2. The results suggest that an increase in configurational entropy at blocking layers do not affect crystal structure and superconducting properties under high pressures in the BiS2-based layered system. △ Less

Submitted 11 September, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Comments: 10 pages, 4 figures, to appear in JPSJ

Superconductivity in In-doped AgPbBiTe3 compounds synthesized by high-pressure synthesis

Authors: Takahiro Sawahara, Hiroto Arima, Takayoshi Katase, Aichi Yamashita, Ryuji Higashinaka, Yoshikazu Mizuguchi

Abstract: NaCl-type metal tellurides (MTe) have been widely studied due to unique physical properties. We investigated the In-doping effects on structural and physical properties of Na-Cl type (AgPbBi)(1-x)/3InxTe and the superconducting properties of the In-doped samples. Polycrystalline samples with x = 0-0.5 were synthesized by utilizing high-pressure synthesis. For x = 0.2-0.5, superconductivity was obs… ▽ More NaCl-type metal tellurides (MTe) have been widely studied due to unique physical properties. We investigated the In-doping effects on structural and physical properties of Na-Cl type (AgPbBi)(1-x)/3InxTe and the superconducting properties of the In-doped samples. Polycrystalline samples with x = 0-0.5 were synthesized by utilizing high-pressure synthesis. For x = 0.2-0.5, superconductivity was observed in magnetization measurements, where the highest transition temperature (Tc) was 2.8 K for x = 0.4. We measured specific heat for x = 0.4 and confirmed the bulk nature of the superconductivity. The evolution of the Seebeck coefficient and lattice constant by In doping suggests that In valence state is In+3, and the In doping generates electron carriers in the (AgPbBi)(1-x)/3InxTe system. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Comments: 12 pages, 5 figures

Large magneto-thermal-switching ratio in superconducting Pb wires

Authors: Miku Yoshida, Hiroto Arima, Aichi Yamashita, Ken-ichi Uchida, Yoshikazu Mizuguchi

Abstract: Thermal switching by magnetic fields is one of the important functionalities in thermal management technologies. In low-temperature devices, superconducting states can be used as a magneto-thermal-switching (MTS) component, because carrier thermal conductivity (\k{appa}) is strongly suppressed in superconducting states. Recently, we demonstrated that the MTS ratio (MTSR) of pure Nb reached 650% at… ▽ More Thermal switching by magnetic fields is one of the important functionalities in thermal management technologies. In low-temperature devices, superconducting states can be used as a magneto-thermal-switching (MTS) component, because carrier thermal conductivity (\k{appa}) is strongly suppressed in superconducting states. Recently, we demonstrated that the MTS ratio (MTSR) of pure Nb reached 650% at a temperature (T) of 2.5 K under a magnetic field (H) of 4.0 kOe [M. Yoshida et al., Appl. Phys. Express 16, 033002 (2023)]. In this study, to enrich knowledge on MTS of superconductors, the MTSRs of pure Pb wires with 5N and 3N purities were investigated by measuring the temperature or magnetic field dependences of \k{appa}. For 5N-Pb, a large MTSR exceeding 1000% was observed below 3.6 K under H > 600 Oe. Although higher MTSRs were expected at lower temperatures under H > 600 Oe, the obtained data under those conditions were accompanied by large errors due to magnetic-field-induced huge \k{appa} at low temperatures. In contrast, the \k{appa} for 3N-Pb were observed to be clearly lower than that for 5N-Pb. Although the magnetic-field-induced change in \k{appa} was small, the MTSR at T = 2.5 K was 300%. These results suggest that Pb is a promising material for low-temperature magneto-thermal switching because of wide-range \k{appa} tunable by magnetic field and the purity. △ Less

Submitted 14 May, 2023; originally announced May 2023.

Comments: 12 pages, 3 figures, supplemental materials

Journal ref: J. Appl. Phys. 134, 065102 (2023)

Magneto-thermal-switching properties of superconducting Nb

Authors: Miku Yoshida, Md. Riad Kasem, Aichi Yamashita, Ken-ichi Uchida, Yoshikazu Mizuguchi

Abstract: Recently, thermal switching has been extensively studied because it is a key component for thermal management in electronic devices. Here, we show a huge magneto-thermal-switching ratio (MTSR) in pure Nb at temperatures lower than its superconducting transition temperature (Tc = 9.2 K). The MTSR increases with decreasing temperature, and MTSR of 650% was observed at T = 2.5 K under H = 4.0 kOe. Th… ▽ More Recently, thermal switching has been extensively studied because it is a key component for thermal management in electronic devices. Here, we show a huge magneto-thermal-switching ratio (MTSR) in pure Nb at temperatures lower than its superconducting transition temperature (Tc = 9.2 K). The MTSR increases with decreasing temperature, and MTSR of 650% was observed at T = 2.5 K under H = 4.0 kOe. The thermal switching in superconductors with the huge MTSR will be useful for improvement of the performance of low-temperature electronic devices. △ Less

Submitted 13 March, 2023; originally announced March 2023.

Comments: 11 pages, 3 figures, supplementary data

Synthesis and physical properties of (Pb0.5M0.5)(Sr,La)2CuOz (z~5; M = Fe, Co, Cu, and Zn)

Authors: Takumi Nakano, Toshihiko Maeda, Takeshi Fujita, Aichi Yamashita

Abstract: (Pb0.5Cu0.5)(Sr0.5La0.5)2CuOz (abbreviated as (Pb,Cu)-"1-2-0-1") with superconducting transition temperature (Tc) of 25 K is a member (n = 1) of one of the homologous series of cuprate superconductors, (Pb4+,Cu2+)(Sr2+,Ln3+)2(Y3+,Ca2+)n-1Cu2+nO2-2n+3 (n = 1-4; Ln: lanthanoid elements). For the (Pb,Cu)-"1-2-0-1", substitution effects of 3d transition metal elements M (M = Fe, Co, and Zn) for the Cu… ▽ More (Pb0.5Cu0.5)(Sr0.5La0.5)2CuOz (abbreviated as (Pb,Cu)-"1-2-0-1") with superconducting transition temperature (Tc) of 25 K is a member (n = 1) of one of the homologous series of cuprate superconductors, (Pb4+,Cu2+)(Sr2+,Ln3+)2(Y3+,Ca2+)n-1Cu2+nO2-2n+3 (n = 1-4; Ln: lanthanoid elements). For the (Pb,Cu)-"1-2-0-1", substitution effects of 3d transition metal elements M (M = Fe, Co, and Zn) for the Cu site in the (Pb,Cu)-O charge-reservoir layer (labelled as Cu(1)) are systematically investigated. Because Fe, Co and Ni ions exist as divalent or trivalent in ionic crystals, the Sr2+/La3+ ratio in the (Sr,Ln) site is adjusted to satisfy charge neutrality, assuming that they are in a trivalent state. This results in the successful synthesis of new materials with nominal compositions of (Pb0.5M0.5)(Sr0.75La0.25)2CuOz (M = Fe and Co). This observation suggests that Fe and Co are trivalent in "1-2-0-1". For M = Zn, the nominal composition of (Pb0.5Zn0.5)(Sr0.5La0.5)2CuOz was found to yield a nearly single "1-2-0-1" phase. Temperature dependence of electrical resistivity and magnetization were measured, and superconductivity was confirmed only for the case of M = Zn with a Tc of 19.7 K. For these three materials, the distribution of Fe, Co and Zn between Cu(1) and another Cu site in the Cu-O2 plane labelled as Cu(2) was investigated employing transmission electron microscopy, which showed that Fe, Co, and Zn occupy both the Cu(1) and Cu(2) sites. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Comments: 26 pages, 10 figures

Uniaxial negative thermal expansion in an orthorhombic superconductor CoZr3

Authors: Hiroto Arima, Tatsuki Inui, Aichi Yamashita, Akira Miura, Hiroaki Itou, Chikako Moriyoshi, Hiroshi Fujihisa, Yoshikazu Mizuguchi

Abstract: We investigated the temperature evolution of crystal structure of orthorhombic CoZr3, which is a superconductor with a transition temperature of 4.3 K, by synchrotron and laboratory (CuKα) X-ray diffraction. Uniaxial negative thermal expansion along the c-axis, which is similar to that observed in tetragonal CoZr2, has been observed at a wide temperature range of T = 90-800 K in CoZr3, while a-and… ▽ More We investigated the temperature evolution of crystal structure of orthorhombic CoZr3, which is a superconductor with a transition temperature of 4.3 K, by synchrotron and laboratory (CuKα) X-ray diffraction. Uniaxial negative thermal expansion along the c-axis, which is similar to that observed in tetragonal CoZr2, has been observed at a wide temperature range of T = 90-800 K in CoZr3, while a-and b-axis exhibit positive thermal expansion. △ Less

Submitted 25 November, 2022; originally announced November 2022.

Comments: 9 pages, 3 figures, supplemental materials

Weak antilocalization induced by Se substitution in layered BiCh$_2$-based (Ch = S, Se) superconductors LaO$_{1-x}$F$_x$BiS$_{2-y}$Se$_y$

Authors: Kazuhisa Hoshi, Hiroto Arima, Noriyuki Kataoka, Masayuki Ochi, Aichi Yamashita, Anne de Visser, Takayoshi Yokoya, Kazuhiko Kuroki, Yoshikazu Mizuguchi

Abstract: We report transport properties for layered BiCh2-based (Ch = S, Se) superconductors LaO1-xFxBiS2-ySey (x = 0.2, 0.5, y = 0-1.05) and the observation of weak antilocalization (WAL). Electrical resistivity and Hall coefficients for the Se-poor samples increase with decreasing temperature. The increase becomes less pronounced with increasing Se concentration indicating a loss of insulating behavior.… ▽ More We report transport properties for layered BiCh2-based (Ch = S, Se) superconductors LaO1-xFxBiS2-ySey (x = 0.2, 0.5, y = 0-1.05) and the observation of weak antilocalization (WAL). Electrical resistivity and Hall coefficients for the Se-poor samples increase with decreasing temperature. The increase becomes less pronounced with increasing Se concentration indicating a loss of insulating behavior. Interestingly, the moderately Se-substituted samples exhibit metallic behavior in the high-temperature region and a weak increase in the resistivity in the low-temperature regions, which indicates the existence of carrier localization. The heavily Se-substituted compounds show metallic behavior in the entire-temperature region. Sign changes of the Hall coefficients are observed for the x = 0.2 samples, which possibly is related to a charge-density wave (CDW). Magnetoresistance measurements indicate that WAL is realized in the heavily Se-substituted systems. The WAL behavior is weakened by the changes in F and Se concentrations. A crossover state of the WAL and WL emerges around the moderately F-doped and Se-free LaO0.8F0.2BiS2. The change of the resistivity behavior by the F and Se substitution clearly correlates to the difference of the magnetoconductance. Moreover, the localization regions of the WAL-WL crossover and weak WAL states are possibly associated with the CDW. We propose that the BiCh2-based system is a good platform for studying relationship between WAL, superconductivity, and electronic ordering because those states are tunable by element substitutions with bulk single crystals. △ Less

Submitted 1 November, 2022; originally announced November 2022.

Glassy atomic vibrations and blurry electronic structures created by local structural disorders in high-entropy metal telluride superconductors

Authors: Yoshikazu Mizuguchi, Hidetomo Usui, Rei Kurita, Kyohei Takae, Md. Riad Kasem, Ryo Matsumoto, Kazuki Yamane, Yoshihiko Takano, Yuki Nakahira, Aichi Yamashita, Yosuke Goto, Akira Miura, Chikako Moriyoshi

Abstract: The motivation of this work is our recent observation of the robustness of superconductivity in a High-entropy (HE) superconductor Ag0.2In0.2Sn0.2Pb0.2Bi0.2Te (CsCl-type) to external pressure. The superconducting transition temperature (Tc) of Ag0.2In0.2Sn0.2Pb0.2Bi0.2Te is almost constant with pressure, described as robustness of superconductivity to pressure, whereas the PbTe with zero configura… ▽ More The motivation of this work is our recent observation of the robustness of superconductivity in a High-entropy (HE) superconductor Ag0.2In0.2Sn0.2Pb0.2Bi0.2Te (CsCl-type) to external pressure. The superconducting transition temperature (Tc) of Ag0.2In0.2Sn0.2Pb0.2Bi0.2Te is almost constant with pressure, described as robustness of superconductivity to pressure, whereas the PbTe with zero configurational entropy of mixing exhibits a clear decrease in Tc with pressure. Here, we investigated the atomic displacement parameters (Uiso), the atomic-vibration characteristics, and the electronic states of metal tellurides (MTe) with various configurational entropy of mixing (DSmix) at the M site. The Uiso for the M site is clearly increased by M-site alloying with DSmix > 1.1R, which is the evidence of local disorder introduced by the increase in DSmix via the solution of three or more M elements. The revealed vibrational density of states (DOS) shows a remarkable broadening with DSmix > 1.1R, which indicates glassy characteristics of atomic vibration in HE MTe with a NaCl-type structure (low-pressure phase). On the electronic states of the CsCl-type (high-pressure) phases, where the robustness of Tc is observed, blurry electronic band structure appears with increasing DSmix, which indicates the evolution of blurry (glassy) electronic states in HE MTe with the CsCl-type structure. The estimated electronic DOS at Fermi energy cannot explain the changes in Tc for HE MTe when assuming conventional electron-phonon superconductivity, but the conventional explanation seems to work for PbTe. Therefore, the pairing mechanisms in MTe with DSmix > 1.1R are affected by glassy phonon and/or blurry electronic states in MTe, and the robustness of superconductivity would be originating from unique electron-phonon coupling. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: 25 pages, 5 figures, Supplemental Information

Estimation of Grüneisen Parameter of Layered Superconductor LaO0.5F0.5BiS2-xSex (x = 0.2, 0.4, 0.6, 0.8, 1.0)

Authors: Fysol Ibna Abbas, Kazuhisa Hoshi, Yuki Nakahira, Miku Yoshida, Aichi Yamashita, Hiroaki Ito, Akira Miura, Chikako Moriyoshi, Chul-Ho Lee, Yoshikazu Mizuguchi

Abstract: The superconducting properties and structural parameters, including the Grüneisen parameter (γG), of the BiCh2-based (Ch: S, Se) layered superconductor LaO0.5F0.5BiS2-xSex were investigated. The superconducting transition temperature (Tc) increased with increasing Se concentration (x), and bulk superconductivity was induced by Se substitution. γG exhibited a larger value when x greater than 0.4, w… ▽ More The superconducting properties and structural parameters, including the Grüneisen parameter (γG), of the BiCh2-based (Ch: S, Se) layered superconductor LaO0.5F0.5BiS2-xSex were investigated. The superconducting transition temperature (Tc) increased with increasing Se concentration (x), and bulk superconductivity was induced by Se substitution. γG exhibited a larger value when x greater than 0.4, where the superconducting properties were improved. These results suggest that the increase of lattice anharmonicity is preferable for superconductivity in LaO0.5F0.5BiS2-xSex. The discussion includes data for related superconductors REO0.5F0.5BiS2 (RE = Pr, Nd), where a positive correlation between γG and Tc is revealed for Se-poor samples. In addition, specific heat analyses suggest the presence of a low-energy optical phonon mode for LaO0.5F0.5BiS2-xSex. △ Less

Submitted 25 November, 2022; v1 submitted 25 August, 2022; originally announced August 2022.

Comments: 23 pages, 7 figures, supplemental data

Superconductivity of high-entropy-alloy-type transition-metal zirconide (Fe,Co,Ni,Cu,Ga)Zr2

Authors: Md. Riad Kasem, Hiroto Arima, Yoichi Ikeda, Aichi Yamashita, Yoshikazu Mizuguchi

Abstract: We synthesized a new high-entropy-alloy-type (HEA-type) superconductor (Fe,Co,Ni,Cu,Ga)Zr2 with a Tc of 2.9 K. The EDX analyses revealed that the actual composition of the transition-metal site (Tr-site) is Tr = Fe0.18Co0.18Ni0.16Cu0.25Ga0.23, which gives the configurational entropy of mixing ΔSmix = 1.60R for the Tr site. Neutron powder diffraction revealed that the sample has a tetragonal CuAl2-… ▽ More We synthesized a new high-entropy-alloy-type (HEA-type) superconductor (Fe,Co,Ni,Cu,Ga)Zr2 with a Tc of 2.9 K. The EDX analyses revealed that the actual composition of the transition-metal site (Tr-site) is Tr = Fe0.18Co0.18Ni0.16Cu0.25Ga0.23, which gives the configurational entropy of mixing ΔSmix = 1.60R for the Tr site. Neutron powder diffraction revealed that the sample has a tetragonal CuAl2-type (space group: #140). The lattice constant of a monotonically decreases with decreasing temperature, but the lattice constant of c does not exhibit a clear shrinkage. Isotropic displacement parameter for both the Tr and Zr sites are large, which is probably caused by the HEA-type Tr site. The small temperature dependences of Uiso for both sites also indicate the presence of the local structural disorder in (Fe,Co,Ni,Cu,Ga)Zr2. From electrical resistivity, magnetic susceptibility, and specific heat measurements, bulk superconductivity was confirmed. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: 6 pages, 5 figures

Journal ref: J. Phys. Mater. 5, 045001 (2022)

Lattice Anharmonicity in BiS2-Based Layered Superconductor RE(O,F)BiS2 (RE = La, Ce, Pr, Nd)

Authors: Fysol Ibna Abbas, Kazuhisa Hoshi, Aichi Yamashita, Yuki Nakahira, Yosuke Goto, Akira Miura, Chikako Moriyoshi, Yoshihiro Kuroiwa, Kensei Terashima, Ryo Matsumoto, Yoshihiko Takano, Yoshikazu Mizuguchi

Abstract: We studied Grüneisen parameter (γG) to investigate lattice anharmonicity in a layered BiS2-based superconductor system REO1-xFxBiS2 (RE = La, Ce, Pr, Nd), where in-plane chemical pressure was tuned by substituting the RE elements. With increasing in-plane chemical pressure, bulk modulus remarkably increases, and a high γG is observed for RE = Nd. The dependence of γG on in-plane chemical pressure… ▽ More We studied Grüneisen parameter (γG) to investigate lattice anharmonicity in a layered BiS2-based superconductor system REO1-xFxBiS2 (RE = La, Ce, Pr, Nd), where in-plane chemical pressure was tuned by substituting the RE elements. With increasing in-plane chemical pressure, bulk modulus remarkably increases, and a high γG is observed for RE = Nd. The dependence of γG on in-plane chemical pressure exhibits a good correlation with Tc, and a higher Tc is achieved when γG is large for RE = Nd. In addition, γG shows a slight decrease by a decrease of F concentration (x) in REO1-xFxBiS2. Our results show that the anharmonic vibration of Bi along the c-axis is present in REO1-xFxBiS2, and the enhancement of the anharmonicity is positively linked to superconducting Tc and pairing mechanisms. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 15 pages, 5 figures

Journal ref: J. Phys. Soc. Jpn. 91, 074706 (2022)

Estimation of Grüneisen parameter of high-entropy-alloy-type functional materials

Authors: F. I. Abbas, Y. Nakahira, A. Yamashita, Md. R. Kasem, M. Yoshida, Y. Goto, A. Miura, K. Terashima, R. Matsumoto, Y. Takano, C. Moriyoshi, Y. Mizuguchi

Abstract: In functional materials like thermoelectric materials and superconductors, the interplay between functionality, electronic structure, and phonon characteristics is one of the key factors to improve functionality and to understand the mechanisms. In the first part of this article, we briefly review investigations on lattice anharmonicity in functional materials by Grüneisen parameter (γG). One can… ▽ More In functional materials like thermoelectric materials and superconductors, the interplay between functionality, electronic structure, and phonon characteristics is one of the key factors to improve functionality and to understand the mechanisms. In the first part of this article, we briefly review investigations on lattice anharmonicity in functional materials by Grüneisen parameter (γG). One can find that the γG can be a good scale for large lattice anharmonicity and for detecting a change in anharmonicity amplitude in functional materials. Then, we show original results on estimation of γG for recently-developed high-entropy-alloy-type (HEA-type) functional materials with a layered structure and a NaCl-type structure. As a common trend between those two systems with two- and three-dimensional structures, we find that γG increases by a slight increase in configurational entropy of mixing (ΔSmix), and then γG decreases with increasing ΔSmix in high-entropy region. △ Less

Submitted 25 February, 2022; originally announced February 2022.

Comments: 11 pages, 5 figures

Journal ref: Condens. Matter 7, 34 (2022)

Robustness of superconductivity to external pressure in high-entropy-alloy-type metal telluride AgInSnPbBiTe5

Authors: Md. Riad Kasem, Yuki Nakahira, Hitoshi Yamaoka, Ryo Matsumoto, Aichi Yamashita, Hirofumi Ishii, Nozomu Hiraoka, Yoshihiko Takano, Yosuke Goto, Yoshikazu Mizuguchi

Abstract: High-entropy-alloy (HEA) superconductors are a new class of disordered superconductors. In this study, we investigate the robustness of superconducting states in HEA-type metal telluride (MTe; M = Ag, In, Sn, Pb, Bi) under high pressure. PbTe exhibits a structural transition from a NaCl-type to an orthorhombic Pnma structure at low pressures, and further transitions to a CsCl-type structure at hig… ▽ More High-entropy-alloy (HEA) superconductors are a new class of disordered superconductors. In this study, we investigate the robustness of superconducting states in HEA-type metal telluride (MTe; M = Ag, In, Sn, Pb, Bi) under high pressure. PbTe exhibits a structural transition from a NaCl-type to an orthorhombic Pnma structure at low pressures, and further transitions to a CsCl-type structure at high pressures. When the superconductivity of the CsCl-type PbTe is observed, it is found that its superconducting transition temperature (Tc) decreases with pressure. However, in the HEA-type AgInSnPbBiTe5, Tc is almost independent of pressure, for pressures ranging from 13.0 to 35.1 GPa. This trend is quite similar to that observed in an HEA superconductor (TaNb)0.67(HfZrTi)0.33, which shows that the robustness of superconductivity to external pressure is a universal feature in HEA-type superconductors. To clarify the effects of the modification of the configurational entropy of mixing on the crystal structure, superconducting states, and electronic structure of MTe, electrical resistance measurements, synchrotron X-ray diffraction, and synchrotron X-ray absorption spectroscopy with partial fluorescence mode (PFY-XAS) for three MTe polycrystalline samples of PbTe, AgPbBiTe3, and AgInSnPbBiTe5 with different configurational entropies of mixing at the M site were performed. △ Less

Submitted 13 December, 2021; originally announced December 2021.

Comments: 22 pages, 4 figures, supporting information

Journal ref: Sci. Rep. 12, 7789 (2022)

Fabrication of high-entropy REBa2Cu3O7-d thin films by pulsed laser deposition

Authors: Aichi Yamashita, Kazuki Hashimoto, Yusuke Nakanishi, Toshihiko Maeda, Yoshikazu Mizuguchi

Abstract: Epitaxial thin films of REBa2Cu3O7-d (RE123, RE: rare earth) having a high entropy (HE) RE site were successfully fabricated on a SrTiO3 substrate by the pulsed laser deposition method. One to five RE elements are solved at the RE site, which results in an increase in configurational entropy of mixing (dSmix). Through the measurements of critical current density (Jc) by a magnetization and the Bea… ▽ More Epitaxial thin films of REBa2Cu3O7-d (RE123, RE: rare earth) having a high entropy (HE) RE site were successfully fabricated on a SrTiO3 substrate by the pulsed laser deposition method. One to five RE elements are solved at the RE site, which results in an increase in configurational entropy of mixing (dSmix). Through the measurements of critical current density (Jc) by a magnetization and the Bean's model analysis, we found that the Jc of the HE films exceeds an order of 1.0 MA/cm2 under conditions of T < 20 K and H < 7 T. Since the HE effects have a potential to an improvement of irradiation tolerance, the present results encourage further development of HE RE123 superconducting materials for a practical use in the environment with high magnetic fields and irradiation, for example in fusion reactors. △ Less

Submitted 12 December, 2021; originally announced December 2021.

Comments: 7 pages, 4 figures

Improvement of upper critical field by the compositionally-complex-alloy concept in A15 superconductor V3X (X: Al, Si, Ga, Ge, Sn)

Authors: Yuki Nakahira, Ryosuke Kiyama, Aichi Yamashita, Hiroaki Itou, Akira Miura, Chikako Moriyoshi, Yosuke Goto, Yoshikazu Mizuguchi

Abstract: Compositionally complex alloys (CCAs) are a new category of high-entropy materials containing more than two high-entropy phases in an alloy sample. We applied the concept of CCA to a A15-type compound superconductor V3X where X site is occupied by Al, Si, Ga, Ge, and Sn. The V3X sample shows bulk superconductivity with a transition temperature (Tc) of 6.4 K, which is close to the Tc of V3Ge. The u… ▽ More Compositionally complex alloys (CCAs) are a new category of high-entropy materials containing more than two high-entropy phases in an alloy sample. We applied the concept of CCA to a A15-type compound superconductor V3X where X site is occupied by Al, Si, Ga, Ge, and Sn. The V3X sample shows bulk superconductivity with a transition temperature (Tc) of 6.4 K, which is close to the Tc of V3Ge. The upper critical field (Bc2(0)) of V3X estimated from magnetic susceptibility is 8.8 T, which is ~50% higher than that of V3Ge (Bc2(0) = 5.8 T). The presence of at least five different A15 phases with high configurational entropy of mixing were revealed. We consider that the examined V3X sample is an example system of CCA-type superconducting intermetallic compound. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Comments: 20 pages, 5 figures + 1 supplemental figure

Superconductivity in In-doped AgSnBiTe3 with possible band inversion

Authors: Tsubasa Mitobe, Kazuhisa Hoshi, Md. Riad Kasem, Ryosuke Kiyama, Hidetomo Usui, Aichi Yamashita, Ryuji Higashinaka, Tatsuma D. Matsuda, Yuji Aoki, Takayoshi Katase, Yosuke Goto, Yoshikazu Mizuguchi

Abstract: We investigated the chemical pressure effects on structural and electronic properties of SnTe-based material using partial substitution of Sn by Ag0.5Bi0.5, which results in lattice shrinkage. For Sn1-2x(AgBi)xTe, single-phase polycrystalline samples were obtained with a wide range of x. On the basis of band calculations, we confirmed that the Sn1-2x(AgBi)xTe system is basically possessing band in… ▽ More We investigated the chemical pressure effects on structural and electronic properties of SnTe-based material using partial substitution of Sn by Ag0.5Bi0.5, which results in lattice shrinkage. For Sn1-2x(AgBi)xTe, single-phase polycrystalline samples were obtained with a wide range of x. On the basis of band calculations, we confirmed that the Sn1-2x(AgBi)xTe system is basically possessing band inversion and topologically preserved electronic states. To explore new superconducting phases related to the topological electronic states, we investigated the In-doping effects on structural and superconducting properties for x = 0.33 (AgSnBiTe3). For (AgSnBi)(1-y)/3InyTe, single-phase polycrystalline samples were obtained for y = 0-0.5 by high-pressure synthesis. Superconductivity was observed for y = 0.2-0.5. For y = 0.4, the transition temperature estimated from zero-resistivity state was 2.4 K, and the specific heat investigation confirmed the emergence of bulk superconductivity. Because the presence of band inversion was theoretically predicted, and the parameters obtained from specific heat analyses were comparable to In-doped SnTe, we expect that the (AgSnBi)(1-y)/3InyTe and other (Ag,In,Sn,Bi)Te phases are candidate systems for studying topological superconductivity. △ Less

Submitted 11 November, 2021; v1 submitted 15 September, 2021; originally announced September 2021.

Comments: 18 pages, 9 figures, supplemental data is included

Improvement of local critical current density of REBa2Cu3O7-d by the increase in configurational entropy of mixing at the RE site

Authors: Aichi Yamashita, Yuta Shukunami, Yoshikazu Mizuguchi

Abstract: REBa2Cu3O7-d (RE123, RE: rare earth) is one of the high-temperature superconductors with a transition temperature (Tc) exceeding 90 K. Because of its high Tc and large critical current density (Jc) under magnetic fields, RE123 superconductors have been expected to play a key role in superconductivity application. To accelerate application researches on RE123-based devices, further improvements of… ▽ More REBa2Cu3O7-d (RE123, RE: rare earth) is one of the high-temperature superconductors with a transition temperature (Tc) exceeding 90 K. Because of its high Tc and large critical current density (Jc) under magnetic fields, RE123 superconductors have been expected to play a key role in superconductivity application. To accelerate application researches on RE123-based devices, further improvements of Jc characteristics have been desired. In this study, we investigated the effects of high-entropy alloying at the RE site on the superconducting properties, through the measurements of local (intra-grain) Jc (Jclocal) by a remanent magnetization method. We found that Jclocal shows a trend to be improved when four or five RE elements are solved at the RE site, which results in high configurational entropy of mixing (delta_Smix). Because high-entropy alloying can improve Jclocal of RE123 superconductors by modification of the RE site composition and delta_Smix, and the technique would be applicable together with other techniques, such as introduction of nanoscale disorders, our entropy-engineering strategy introduced here would be useful for development of RE123 superconducting materials available under high magnetic fields. △ Less

Submitted 22 March, 2021; originally announced March 2021.

Comments: 19 pages, 5 figures, 2 tables, supplemental data

Journal ref: Royal Society Open Science 9, 211874 (2022)

Anomalous broadening of specific heat jump at Tc in high-entropy-alloy-type superconductor TrZr2

Authors: Md. Riad Kasem, Aichi Yamashita, Taishi Hatano, Yosuke Goto, Osuke Miura, Yoshikazu Mizuguchi

Abstract: A high-entropy-alloy-type (HEA-type) superconductor is new category of highly disordered superconductors. Therefore, finding brand-new superconducting characteristics in the HEA-type superconductors would open new avenue to investigate the relationship between structural disorder and superconductivity. Here, we report on the remarkable broadening of specific heat jump near a superconducting transi… ▽ More A high-entropy-alloy-type (HEA-type) superconductor is new category of highly disordered superconductors. Therefore, finding brand-new superconducting characteristics in the HEA-type superconductors would open new avenue to investigate the relationship between structural disorder and superconductivity. Here, we report on the remarkable broadening of specific heat jump near a superconducting transition tempreature (Tc) in transition-metal zirconides (TrZr2) with different mixing entropy (ΔSmix) at the Tr site. With increasing ΔSmix, the superconducting transition seen in specific heat became broader, whereas those seen in magnetization were commonly sharp. Therefore the broadening of specific heat jump would be related to the microscopic inhomogeneity of the formation of Cooper pairs behind the emergence of bulk superconductivity states. △ Less

Submitted 12 March, 2021; originally announced March 2021.

Comments: 7 pages, 3 figures

Synthesis of new high-entropy alloy-type Nb3 (Al, Sn, Ge, Ga, Si) superconductors

Authors: Aichi Yamashita, Tatsuma D. Matsuda, Yoshikazu Mizuguchi

Abstract: Studies on high-entropy alloy (HEA) superconductors have recently been increasing, particularly in the fields of materials science and condensed matter physics. To contribute to research on new HEA-type superconductors, in our study we synthesized polycrystalline samples of A15-type superconductors of Nb3Al0.2Sn0.2Ge0.2Ga0.2Si0.2 (#1) and Nb3Al0.3Sn0.3Ge0.2Ga0.1Si0.1 (#2) with an HEA-type site by… ▽ More Studies on high-entropy alloy (HEA) superconductors have recently been increasing, particularly in the fields of materials science and condensed matter physics. To contribute to research on new HEA-type superconductors, in our study we synthesized polycrystalline samples of A15-type superconductors of Nb3Al0.2Sn0.2Ge0.2Ga0.2Si0.2 (#1) and Nb3Al0.3Sn0.3Ge0.2Ga0.1Si0.1 (#2) with an HEA-type site by arc melting. Elemental and structural analyses revealed that the compositions of the obtained samples satisfied the HEA state criteria. Superconducting transitions were observed at 9.0 and 11.0 K for #1 and #2, respectively, in the temperature dependence of magnetization and electrical resistivity. Specific heat measurements revealed that the Sommerfeld coefficient, Debye temperature, and ΔC/γTc for the obtained samples were close to those reported for conventional Nb3Sn family superconductors. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: 15 pages, 4 figures, 1 table

Superconductivity in HEA-type compounds

Authors: Y. Mizuguchi, A. Yamashita

Abstract: Since the discovery of superconductivity in a high-entropy alloy (HEA) Ti-Zr-Nb-Hf-Ta in 2014, the community of superconductor science has explored new HEA superconductors to find the merit of the HEA states on superconducting properties. Since 2018, we have developed HEA-type compounds as superconductors or thermoelectric materials. As well known, compounds like intermetallic compounds or layered… ▽ More Since the discovery of superconductivity in a high-entropy alloy (HEA) Ti-Zr-Nb-Hf-Ta in 2014, the community of superconductor science has explored new HEA superconductors to find the merit of the HEA states on superconducting properties. Since 2018, we have developed HEA-type compounds as superconductors or thermoelectric materials. As well known, compounds like intermetallic compounds or layered compounds are composed of multi crystallographic sites. In a HEA-type compounds, one or more sites are alloyed and total mixing entropy satisfies with the criterion of HEA. Herein, we summarize the synthesis methods, the crystal structural variation and superconducting properties of the HEA-type compounds, which include NaCl-type metal tellurides, CuAl2-type transition metal zirconides, high-Tc cuprates, and BiS2-based layered superconductors. The effects of the introduction of a HEA site in various kinds of complicated compounds are discussed from the structural-dimensionality viewpoint. △ Less

Submitted 2 February, 2021; originally announced February 2021.

Comments: review article, 20 pages, 10 figures, 2 tables

High-pressure effects on superconducting properties and crystal structure of Bi-based layered superconductor La2O2Bi3Ag0.6Sn0.4S6

Authors: Supeng Liu, Ryo Matsumoto, Rajveer Jha, Aichi Yamashita, Saori I. Kawaguchi, Yosuke Goto, Yoshihiko Takano, Yoshikazu Mizuguchi

Abstract: The effects of pressure on the superconducting properties of a Bi-based layered superconductor La2O2Bi3Ag0.6Sn0.4S6, which possesses a four-layer-type conducting layer, have been studied through the electrical resistance and magnetic susceptibility measurements. The crystal structure under pressure was examined using synchrotron X-ray diffraction at SPring-8. In the low-pressure regime, bulk super… ▽ More The effects of pressure on the superconducting properties of a Bi-based layered superconductor La2O2Bi3Ag0.6Sn0.4S6, which possesses a four-layer-type conducting layer, have been studied through the electrical resistance and magnetic susceptibility measurements. The crystal structure under pressure was examined using synchrotron X-ray diffraction at SPring-8. In the low-pressure regime, bulk superconductivity with a transition temperature Tc of ~ 4.5 K was induced by pressure, which was achieved by in-plane chemical pressure effect owing to the compression of the tetragonal structure. In the high-pressure regime above 6.4 GPa, a structural symmetry lowering was observed, and superconducting transitions with a Tc ~ 8 K were observed. Our results suggest the possible commonality on the factor essential for Tc in Bi-based superconductors with two-layer-type and four-layer-type conducting layers. △ Less

Submitted 26 November, 2020; originally announced November 2020.

Comments: 20 pages, 9 figures, supplemental materials

Synthesis of high-entropy-alloy-type superconductors (Fe,Co,Ni,Rh,Ir)Zr2 with tunable transition temperature

Authors: Md. Riad Kasem, Aichi Yamashita, Yosuke Goto, Tatsuma D. Matsuda, Yoshikazu Mizuguchi

Abstract: We report on the synthesis and superconductivity of high-entropy-alloy-type (HEA-type) compounds TrZr2 (Tr = Fe, Co, Ni, Rh, Ir), in which the Tr site satisfies the criterion of HEA. Polycrystalline samples of HEA-type TrZr2 with four different compositions at the Tr site were synthesized by arc melting method. The phase purity and crystal structure were examined by Rietveld refinement of X-ray di… ▽ More We report on the synthesis and superconductivity of high-entropy-alloy-type (HEA-type) compounds TrZr2 (Tr = Fe, Co, Ni, Rh, Ir), in which the Tr site satisfies the criterion of HEA. Polycrystalline samples of HEA-type TrZr2 with four different compositions at the Tr site were synthesized by arc melting method. The phase purity and crystal structure were examined by Rietveld refinement of X-ray diffraction profile. It has been confirmed that the obtained samples have a CuAl2-type tetragonal structure. From analyses of elemental composition and mixing entropy at the Tr site, the HEA state for the Tr site was confirmed. The physical properties of obtained samples were characterized by electrical resistivity and magnetization measurements. All the samples show bulk superconductivity with various transition temperature (Tc). The Tc varied according to the compositions and showed correlations with the lattice constant c and Tr-Zr bond lengths. Introduction of an HEA site in TrZr2 is useful to achieve systematic tuning of Tc with a wide temperature range, which would be a merit for superconductivity application. △ Less

Submitted 11 November, 2020; originally announced November 2020.

Comments: 16 pages, 5 figures, SI

Possible pairing mechanism switching driven by structural symmetry breaking in BiS2-based layered superconductors

Authors: Aichi Yamashita, Hidetomo Usui, Kazuhisa Hoshi, Yosuke Goto, Kazuhiko Kuroki, Yoshikazu Mizuguchi

Abstract: Investigation of isotope effects on superconducting transition temperature (Tc) is one of the useful methods to examine whether electron-phonon interaction is essential for pairing mechanisms. The layered BiCh2-based (Ch: S, Se) superconductor family is a candidate for unconventional superconductors, because unconventional isotope effects have previously been observed in La(O,F)BiSSe and Bi4O4S3.… ▽ More Investigation of isotope effects on superconducting transition temperature (Tc) is one of the useful methods to examine whether electron-phonon interaction is essential for pairing mechanisms. The layered BiCh2-based (Ch: S, Se) superconductor family is a candidate for unconventional superconductors, because unconventional isotope effects have previously been observed in La(O,F)BiSSe and Bi4O4S3. In this study, we investigated the isotope effects of 32S and 34S in the high-pressure phase of (Sr,La)FBiS2, which has a monoclinic crystal structure and a higher Tc of 10 K under high pressures, and observed conventional-type isotope shifts in Tc. The conventional-type isotope effects in the monoclinic phase of (Sr,La)FBiS2 are different from the unconventional isotope effects observed in La(O,F)BiSSe and Bi4O4S3, which have a tetragonal structure. The obtained results suggest that the pairing mechanisms of BiCh2-based superconductors could be switched by a structural-symmetry change in the superconducting layers induced by pressure effects. △ Less

Submitted 21 December, 2020; v1 submitted 21 July, 2020; originally announced July 2020.

Comments: 18 pages, 3 figures, 1 table, supplementary file

Journal ref: Sci. Rep. 11, 230(1-7) (2021)

Evolution of two bulk-superconducting phases in Sr0.5RE0.5FBiS2 (RE: La, Ce, Pr, Nd, Sm) by external hydrostatic pressure effect

Authors: Aichi Yamashita, Rajveer Jha, Yosuke Goto, Akira Miura, Chikako Moriyoshi, Yoshihiro Kuroiwa, Chizuru Kawashima, Kouhei Ishida, Hiroki Takahashi, Yoshikazu Mizuguchi

Abstract: Polycrystalline samples of Sr1-xRExFBiS2 (RE: La, Ce, Pr, Nd, and Sm) were synthesized via the solid-state reaction and characterized using synchrotron X-ray diffraction. Although all the Sr0.5RE0.5FBiS2 samples exhibited superconductivity at transition temperatures (Tc) within the range of 2.1-2.7 K under ambient pressure, the estimated superconducting volume fraction was small. This indicated th… ▽ More Polycrystalline samples of Sr1-xRExFBiS2 (RE: La, Ce, Pr, Nd, and Sm) were synthesized via the solid-state reaction and characterized using synchrotron X-ray diffraction. Although all the Sr0.5RE0.5FBiS2 samples exhibited superconductivity at transition temperatures (Tc) within the range of 2.1-2.7 K under ambient pressure, the estimated superconducting volume fraction was small. This indicated the non-bulk nature of superconductivity in these samples under ambient pressure. A dramatic evolution of the bulk superconducting phases was achieved on applying an external hydrostatic pressure. Near pressures below 1 GPa, bulk superconductivity was induced with a Tc of 2.5-2.8 K, which is termed as the low-P phase. Moreover, the high-P phase (Tc = 10.0-10.8 K) featuring bulk characteristics was observed at higher pressures. Pressure-Tc phase diagrams indicated that the critical pressure for the emergence of the high-P phase tends to increase with decreasing ionic radius of the doped RE ions. According to the high-pressure X-ray diffraction measurements of Sr0.5La0.5FBiS2, a structural phase transition from tetragonal to monoclinic also occurred at approximately 1.1 GPa. Thus, this phase transition indicates a pressure-induced superconducting-superconducting transition similar to the transition in LaO0.5F0.5BiS2. Bulk superconducting phases in Sr0.5RE0.5FBiS2 induced by the external hydrostatic pressure effect are expected to be useful for evaluating the mechanisms of superconductivity in BiCh2-based superconductors. △ Less

Submitted 15 June, 2020; originally announced June 2020.

Comments: 14 pages, 7 figures

Synthesis of RE123 high-Tc superconductors with a high-entropy-alloy-type RE site

Authors: Yuta Shukunami, Aichi Yamashita, Yosuke Goto, Yoshikazu Mizuguchi

Abstract: We have synthesized high-entropy-alloy-type (HEA-type) RE123 superconductors Y0.28Nd0.16Sm0.18Eu0.18Gd0.20Ba2Cu3O7-d and Y0.18La0.24Nd0.14Sm0.14Eu0.15Gd0.15Ba2Cu3O7-d with a superconducting transition temperature (Tc) exceeding 90 K. From comparison between HEA-type and conventional RE123 samples, we found that the mixing entropy at the rare earth site does not affect Tc and critical current densi… ▽ More We have synthesized high-entropy-alloy-type (HEA-type) RE123 superconductors Y0.28Nd0.16Sm0.18Eu0.18Gd0.20Ba2Cu3O7-d and Y0.18La0.24Nd0.14Sm0.14Eu0.15Gd0.15Ba2Cu3O7-d with a superconducting transition temperature (Tc) exceeding 90 K. From comparison between HEA-type and conventional RE123 samples, we found that the mixing entropy at the rare earth site does not affect Tc and critical current density (Jc) of the RE123 samples. For all the examined samples, orthorhombicity was found to be an essential parameter for Tc and Jc. In the regime near orthorhombic-tetragonal boundary, Jc for the HEA-type sample was larger than that of conventional-type samples, which suggests that HEA-type RE123 may be useful to improve Jc in the structure with low orthorhombicity. △ Less

Submitted 22 January, 2020; originally announced January 2020.

Comments: 13 pages, 5 figures

Superconducting properties of high-entropy-alloy tellurides M-Te (M: Ag, In, Cd, Sn, Sb, Pb, Bi) with a NaCl-type structure

Authors: Md. Riad Kasem, Kazuhisa Hoshi, Rajveer Jha, Masayoshi Katsuno, Aichi Yamashita, Yosuke Goto, Tatsuma D. Matsuda, Yuji Aoki, Yoshikazu Mizuguchi

Abstract: High-entropy-alloy-type tellurides M-Te, which contain five different metals of M = Ag, In, Cd, Sn, Sb, Pb, and Bi, were synthesized using high pressure synthesis. Structural characterization revealed that all the obtained samples have a cubic NaCl-type structure. Six samples, namely AgCdSnSbPbTe5, AgInSnSbPbTe5, AgCdInSnSbTe5, AgCdSnPbBiTe5, AgCdInPbBiTe5, and AgCdInSnBiTe5 showed superconductivi… ▽ More High-entropy-alloy-type tellurides M-Te, which contain five different metals of M = Ag, In, Cd, Sn, Sb, Pb, and Bi, were synthesized using high pressure synthesis. Structural characterization revealed that all the obtained samples have a cubic NaCl-type structure. Six samples, namely AgCdSnSbPbTe5, AgInSnSbPbTe5, AgCdInSnSbTe5, AgCdSnPbBiTe5, AgCdInPbBiTe5, and AgCdInSnBiTe5 showed superconductivity. The highest transition temperature (Tc) among those samples was 1.4 K for AgInSnSbPbTe5. A sample of AgCdInSbPbTe5 showed a semiconductor-like transport behavior. From the relationship between Tc and lattice constant, it was found that a higher Tc is observed for a telluride with a larger lattice constant. △ Less

Submitted 14 January, 2020; originally announced January 2020.

Comments: 9 pages, 4 figures

Synthesis of Hg-based cuprate superconductors $HgBa_{2}Ca_{n-1}Cu_{n}O_{2(n+1)+δ}$ by CsCl flux additional method

Authors: Hiroshi Hara, Ryo Matsumoto, Shintaro Adachi, Aichi Yamashita, Hiroyuki Takeya, Yoshihiko Takano

Abstract: We have succeeded in the synthesis of Re-doped $HgBa_{2}Ca_{n-1}Cu_{n}O_{2(n+1)+δ}$ quickly by a sealed tube technique with a bit of CsCl flux. Powder X-ray diffraction measurement revealed that the single phases of Re-doped $HgBa_{2}CuO_{4+δ}$ (Hg1201), $HgBa_{2}CaCu_{2}O_{6+δ}$ (Hg1212), and $HgBa_{2}Ca_{2}Cu_{3}O_{8+δ}$ (Hg1223) formed in 4 h. The sample grains exhibited plate-like crystals wit… ▽ More We have succeeded in the synthesis of Re-doped $HgBa_{2}Ca_{n-1}Cu_{n}O_{2(n+1)+δ}$ quickly by a sealed tube technique with a bit of CsCl flux. Powder X-ray diffraction measurement revealed that the single phases of Re-doped $HgBa_{2}CuO_{4+δ}$ (Hg1201), $HgBa_{2}CaCu_{2}O_{6+δ}$ (Hg1212), and $HgBa_{2}Ca_{2}Cu_{3}O_{8+δ}$ (Hg1223) formed in 4 h. The sample grains exhibited plate-like crystals with the sizes of 20$\times$20$\times$1 $μm^{3}$ and the chemical compositions of Hg1201, Hg1212, and Hg1223. The superconducting transitions were observed at 25 K for Hg1201, 122 for Hg1212, and 133 K for Hg1223 in the magnetic susceptibility. These results indicate that the developed method is useful for the fabrication of Hg-based superconducting wires. △ Less

Submitted 6 March, 2019; v1 submitted 14 February, 2019; originally announced February 2019.

Comments: 10 pages, 6 figures

Single Crystal Growth of Cuprate Superconductor (Lu$_{0.8}$Nd$_{0.2}$)Ba$_2$Cu$_4$O$_8$ by KOH Flux Method

Authors: Hiroshi Hara, Shintaro Adachi, Ryo Matsumoto, Aichi Yamashita, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Single crystals of Nd-substituted LuBa$_2$Cu$_4$O$_8$ were successfully grown by the KOH flux method. The single phase of Lu$_{1-x}$Nd$_x$Ba$_2$Cu$_4$O$_8$ [(Lu,Nd)124] formed at $x = 0.2$. The compound crystallized as orthorhombic Ammm structure with lattice constants of a = 3.835(3) Å, b = 3.879(2) Å and c = 27.195(6) Å. Single crystal structural analysis demonstrated that the Nd ion partially o… ▽ More Single crystals of Nd-substituted LuBa$_2$Cu$_4$O$_8$ were successfully grown by the KOH flux method. The single phase of Lu$_{1-x}$Nd$_x$Ba$_2$Cu$_4$O$_8$ [(Lu,Nd)124] formed at $x = 0.2$. The compound crystallized as orthorhombic Ammm structure with lattice constants of a = 3.835(3) Å, b = 3.879(2) Å and c = 27.195(6) Å. Single crystal structural analysis demonstrated that the Nd ion partially occupied the Lu site. The (Lu,Nd)124 exhibited the superconducting transition at ~75 K in the magnetic susceptibility and resistivity. The $T_c$ and the c-axis of the (Lu,Nd)124 corresponded to Tm124. These results indicate that RE124 equivalent to the one composed of single RE element is obtained by combination of two RE elements. △ Less

Submitted 11 October, 2018; originally announced October 2018.

Comments: 12 pages, 5 figures

Universal scaling behavior of the upper critical field in strained FeSe0.7Te0.3 thin films

Authors: Feifei Yuan, Vadim Grinenko, Kazumasa Iida, Stefan Richter, Aurimas Pukenas, Werner Skrotzki, Masahito Sakoda, Michio Naito, Alberto Sala, Marina Putti, Aichi Yamashita, Yoshihiko Takano, Zhixiang Shi, Kornelius Nielsch, Ruben Huehne

Abstract: Revealing the universal behaviors of iron-based superconductors (FBS) is important to elucidate the microscopic theory of superconductivity. In this work, we investigate the effect of in-plane strain on the slope of the upper critical field Hc2 at the superconducting transition temperature Tc (i.e. -dHc2/dT) for FeSe0.7Te0.3 thin films. The in-plane strain tunes Tc in a broad range, while the comp… ▽ More Revealing the universal behaviors of iron-based superconductors (FBS) is important to elucidate the microscopic theory of superconductivity. In this work, we investigate the effect of in-plane strain on the slope of the upper critical field Hc2 at the superconducting transition temperature Tc (i.e. -dHc2/dT) for FeSe0.7Te0.3 thin films. The in-plane strain tunes Tc in a broad range, while the composition and disorder are almost unchanged. We show that -dHc2/dT scales linearly with Tc, indicating that FeSe0.7Te0.3 follows the same universal behavior as observed for pnictide FBS. The observed behavior is consistent with a multiband superconductivity paired by interband interaction such as sign change s+- superconductivity. △ Less

Submitted 13 September, 2018; originally announced September 2018.

Comments: 13 pages, 8 figures. Accepted in New J. Phys

Journal ref: New J. Phys. 20 (2018) 093012

Pressure-induced Superconductivity in Sulfur-doped SnSe Single Crystal Using Boron-doped Diamond Electrode-prefabricated Diamond Anvil Cell

Authors: Ryo Matsumoto, Hiroshi Hara, Hiromi Tanaka, Kazuki Nakamura, Noriyuki Kataoka, Sayaka Yamamoto, Aichi Yamashita, Shintaro Adachi, Tetsuo Irifune, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Sulfur-doped SnSe single crystal was successfully synthesized using a melt and slow-cooling method. The chemical composition and valence state of the obtained sample were analyzed by X-ray photoelectron spectroscopy. The pressure range of a diamond anvil cell with boron-doped diamond electrodes was upgraded to 104 GPa using nano-polycrystalline diamond anvil to investigate a pressure effect for th… ▽ More Sulfur-doped SnSe single crystal was successfully synthesized using a melt and slow-cooling method. The chemical composition and valence state of the obtained sample were analyzed by X-ray photoelectron spectroscopy. The pressure range of a diamond anvil cell with boron-doped diamond electrodes was upgraded to 104 GPa using nano-polycrystalline diamond anvil to investigate a pressure effect for the sample. Electrical resistivity measurements of sulfur-doped SnSe single crystal showed the insulator-metal-superconductor transition by applying high pressure up to 75.9 GPa. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Diamond anvil cell using boron-doped diamond electrodes covered with undoped diamond insulating layer

Authors: Ryo Matsumoto, Aichi Yamashita, Hiroshi Hara, Tetsuo Irifune, Shintaro Adachi, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Diamond anvil cell using boron-doped metallic diamond electrodes covered with undoped diamond insulating layer have been developed for electrical transport measurements under high pressure. These designed diamonds were grown on a bottom diamond anvil via a nanofabrication process combining microwave plasma-assisted chemical vapor deposition and electron beam lithography. The resistance measurement… ▽ More Diamond anvil cell using boron-doped metallic diamond electrodes covered with undoped diamond insulating layer have been developed for electrical transport measurements under high pressure. These designed diamonds were grown on a bottom diamond anvil via a nanofabrication process combining microwave plasma-assisted chemical vapor deposition and electron beam lithography. The resistance measurements of high quality FeSe superconducting single crystal under high pressure were successfully demonstrated by just putting the sample and gasket on the bottom diamond anvil directly. The superconducting transition temperature of FeSe single crystal was enhanced up to 43 K by applying uniaxial-like pressure. △ Less

Submitted 4 March, 2018; originally announced March 2018.

Journal ref: J. Appl. Express, 11 (2018) 053101

Direct observation of double valence-band extrema and anisotropic effective masses of the thermoelectric material SnSe

Authors: T. Nagayama, K. Terashima, T. Wakita, H. Fujiwara, T. Fukura, Y. Yano, K. Ono, H. Kumigashira, O. Ogiso, A. Yamashita, Y. Takano, H. Mori, H. Usui, M. Ochi, K. Kuroki, Y. Muraoka, T. Yokoya

Abstract: Synchrotron-based angle-resolved photoemission spectroscopy is used to determine the electronic structure of layered SnSe, which was recently turned out to be a potential thermoelectric material. We observe that the top of the valence band consists of two nearly independent hole bands, whose tops differ by ~20 meV in energy, indicating the necessity of a multivalley model to describe the thermoele… ▽ More Synchrotron-based angle-resolved photoemission spectroscopy is used to determine the electronic structure of layered SnSe, which was recently turned out to be a potential thermoelectric material. We observe that the top of the valence band consists of two nearly independent hole bands, whose tops differ by ~20 meV in energy, indicating the necessity of a multivalley model to describe the thermoelectric properties. The estimated effective masses are anisotropic, with in-plane values of 0.16-0.39 m$_0$ and an out-of-plane value of 0.71 m$_0$, where m$_0$ is the rest electron mass. Information of the electronic structure is essential to further enhance the thermoelectric performance of hole-doped SnSe. △ Less

Submitted 26 December, 2017; originally announced December 2017.

Comments: 14 pages including 2 figures + 2 pages of supplementary data

Journal ref: Jpn. J. Appl. Phys. 57, 010301 (2018)

Observation of Zero Resistance in As-Electrodeposited FeSe

Authors: Aichi Yamashita, Ryo Matsumoto, Masashi Tanaka, Hiroshi Hara, Kazumasa Iida, Bernhard Holzapfel, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Superconducting FeSe films were electrochemically deposited on rolling-assisted biaxially textured substrate (RABiTS) tape. We observed zero resistivity in the as-electrodeposited FeSe film prepared on the RABiTS when the appropriate voltage was applied while it was dipped into the solution. When the RABiTS tape was dipped in the solution without applying voltage, a thin Se film was deposited on t… ▽ More Superconducting FeSe films were electrochemically deposited on rolling-assisted biaxially textured substrate (RABiTS) tape. We observed zero resistivity in the as-electrodeposited FeSe film prepared on the RABiTS when the appropriate voltage was applied while it was dipped into the solution. When the RABiTS tape was dipped in the solution without applying voltage, a thin Se film was deposited on the substrate. The compositional ratio of the FeSe film got closer to the stoichiometric ratio with decreasing the dipping time before applying voltage. △ Less

Submitted 28 November, 2017; originally announced November 2017.

Electronic Transport Properties of Carrier Controlled SnSe Single Crystals

Authors: Aichi Yamashita, Osamu Ogiso, Ryo Matsumoto, Masashi Tanaka, Hiroshi Hara, Hiromi Tanaka, Hiroyuki Takeya, Chul-Ho Lee, Yoshihiko Takano

Abstract: We found that the electronic transport property of SnSe single crystals was sensitive to oxygen content. Semiconducting SnSe single crystals were obtained by using Sn of grain form as a starting material while powder Sn resulted in metallic SnSe. X-ray photoelectron spectroscopy analysis revealed that the surfaces of raw Sn were oxidized, where the volume fraction was relatively low in grain Sn. T… ▽ More We found that the electronic transport property of SnSe single crystals was sensitive to oxygen content. Semiconducting SnSe single crystals were obtained by using Sn of grain form as a starting material while powder Sn resulted in metallic SnSe. X-ray photoelectron spectroscopy analysis revealed that the surfaces of raw Sn were oxidized, where the volume fraction was relatively low in grain Sn. This demonstrates that contamination of oxygen causes metallic behavior in grown SnSe single crystals. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Comments: 13 pages, 3 figures

The influence of the in-plane lattice constant on the superconducting transition temperature of FeSe0.7Te0.3 thin films

Authors: Feifei Yuan, Kazumasa Iida, Vadim Grinenko, Paul Chekhonin, Aurimas Pukenas, Werner Skrotzki, Masahito Sakoda, Michio Naito, Alberto Sala, Marina Putti, Aichi Yamashita, Yoshihiko Takano, Zhixiang Shi, Kornelius Nielsch, Ruben Huehne

Abstract: Epitaxial Fe(Se,Te) thin films were prepared by pulsed laser deposition on (La0.18Sr0.82)(Al0.59Ta0.41)O3 (LSAT), CaF2-buffered LSAT and bare CaF2 substrates, which exhibit an almost identical in-plane lattice parameter. The composition of all Fe(Se,Te) films were determined to be FeSe0.7Te0.3 by energy dispersive X-ray spectroscopy, irrespective of the substrate. Albeit the lattice parameters of… ▽ More Epitaxial Fe(Se,Te) thin films were prepared by pulsed laser deposition on (La0.18Sr0.82)(Al0.59Ta0.41)O3 (LSAT), CaF2-buffered LSAT and bare CaF2 substrates, which exhibit an almost identical in-plane lattice parameter. The composition of all Fe(Se,Te) films were determined to be FeSe0.7Te0.3 by energy dispersive X-ray spectroscopy, irrespective of the substrate. Albeit the lattice parameters of all templates have comparable values, the in-plane lattice parameter of the FeSe0.7Te0.3 films varies significantly. We found that the superconducting transition temperature (Tc) of FeSe0.7Te0.3 thin films is strongly correlated with their a-axis lattice parameter. The highest Tc of over 19 K was observed for the film on bare CaF2 substrate, which is related to unexpectedly large in-plane compressive strain originating mostly from the thermal expansion mismatch between the FeSe0.7Te0.3 film and the substrate. △ Less

Submitted 9 June, 2017; originally announced June 2017.

Comments: Accepted in AIP Advances, 4 figures

Journal ref: AIP Advances. 7, 065015 (2017)

Phase Diagram of FeSe Deposited by Electrochemical Technique with Different Temperature and Voltage

Authors: Aichi Yamashita, Masashi Tanaka, Hiroyuki Takeya, Yoshihiko Takano

Abstract: High-quality crystalline FeSe is successfully synthesized in 5 minutes by an electrochemical deposition technique via increasing the solution temperature. The synthesis of FeSe have been controlled by the applied voltage, synthesis time and pH value. The obtained samples were summarized as a phase diagram at each temperature and applied voltage. The best synthesis temperature to produce high-quali… ▽ More High-quality crystalline FeSe is successfully synthesized in 5 minutes by an electrochemical deposition technique via increasing the solution temperature. The synthesis of FeSe have been controlled by the applied voltage, synthesis time and pH value. The obtained samples were summarized as a phase diagram at each temperature and applied voltage. The best synthesis temperature to produce high-quality crystalline samples was found to be 70°C. △ Less

Submitted 12 April, 2017; originally announced April 2017.

Comments: 10 pages, 1 figure

Phase-separation control of K$_x$Fe$_{2-y}$Se$_2$ superconductor through rapid-quenching process

Authors: Yusuke Yanagisawa, Masashi Tanaka, Aichi Yamashita, Kouji Suzuki, Hiroshi Hara, Mohammed ElMassalami, Hiroyuki Takeya, Yoshihiko Takano

Abstract: K$_x$Fe$_{2-y}$Se$_2$ exhibits an iron-vacancy ordering at $T_{\rm s} {\sim}270°$C and separates into two phases: a minor superconducting (iron-vacancy-disordered) phase and a major non-superconducting (iron-vacancy-ordered) phase. The microstructural and superconducting properties of this intermixture can be tuned by an appropriate control of the quenching process through $T_{\rm s}$. A faster qu… ▽ More K$_x$Fe$_{2-y}$Se$_2$ exhibits an iron-vacancy ordering at $T_{\rm s} {\sim}270°$C and separates into two phases: a minor superconducting (iron-vacancy-disordered) phase and a major non-superconducting (iron-vacancy-ordered) phase. The microstructural and superconducting properties of this intermixture can be tuned by an appropriate control of the quenching process through $T_{\rm s}$. A faster quenching rate leads to a finer microstructure and a suppression of formation of the non-superconducting phase by up to 50%. Nevertheless, such a faster cooling rate does induce a monotonic reduction in the superconducting transition temperature (from 30.7 K down to 26.0 K) and, simultaneously, a decrease in the iron content within the superconducting phase such that the compositional ratio changed from K$_{0.35}$Fe$_{1.83}$Se$_2$ to K$_{0.58}$Fe$_{1.71}$Se$_2$. △ Less

Submitted 18 March, 2017; v1 submitted 17 January, 2017; originally announced January 2017.

Journal ref: J. Phys. Soc. Jpn. 86, 043703 (2017)

Electrochemical deposition of FeSe on RABiTS tapes

Authors: Satoshi Demura, Masashi Tanaka, Aichi Yamashita, Saleem J. Denholme, Hiroyuki Okazaki, Masaya Fujioka, Takahide Yamaguchi, Hiroyuki Takeya, Kazumasa Iida, Bernhard Holzapfel, Hideaki Sakata, Yoshihiko Takano

Abstract: FeSe film is successfully fabricated onto Rolling Assisted Biaxially Textured Substrate (RABiTS) tapes by an electrochemical deposition technique. The deposited FeSe films tend to become high crystallinity with a decrease in the applied voltage to -1.0 V, and the compositional ratio of Fe to Se approaches 1:1. The sample deposited at -1.0 V shows a superconducting transition approximately 8.0 K in… ▽ More FeSe film is successfully fabricated onto Rolling Assisted Biaxially Textured Substrate (RABiTS) tapes by an electrochemical deposition technique. The deposited FeSe films tend to become high crystallinity with a decrease in the applied voltage to -1.0 V, and the compositional ratio of Fe to Se approaches 1:1. The sample deposited at -1.0 V shows a superconducting transition approximately 8.0 K in the magnetic susceptibility. △ Less

Submitted 3 December, 2015; v1 submitted 29 December, 2014; originally announced December 2014.

Comments: 10 pages, 1 figure

Journal ref: J. Phys. Soc. Jpn. Vol. 85, No. 1 (2016)