-
Combining Electron Spin Resonance Spectroscopy with Scanning Tunneling Microscopy at High Magnetic Fields
Authors:
Robert Drost,
Maximilian Uhl,
Piotr Kot,
Janis Siebrecht,
Alexander Schmid,
Jonas Merkt,
Stefan Wünsch,
Michael Siegel,
Oliver Kieler,
Reinhold Kleiner,
Christian R. Ast
Abstract:
Magnetic media remain a key in information storage and processing. The continuous increase of storage densities and the desire for quantum memories and computers pushes the limits of magnetic characterisation techniques. Ultimately, a tool which is capable of coherently manipulating and detecting individual quantum spins is needed. The scanning tunnelling microscope (STM) is the only technique whi…
▽ More
Magnetic media remain a key in information storage and processing. The continuous increase of storage densities and the desire for quantum memories and computers pushes the limits of magnetic characterisation techniques. Ultimately, a tool which is capable of coherently manipulating and detecting individual quantum spins is needed. The scanning tunnelling microscope (STM) is the only technique which unites the prerequisites of high spatial and energy resolution, low temperature and high magnetic fields to achieve this goal. Limitations in the available frequency range for electron spin resonance STM (ESR-STM) mean that many instruments operate in the thermal noise regime. We resolve challenges in signal delivery to extend the operational frequency range of ESR-STM by more than a factor of two and up to 100GHz, making the Zeeman energy the dominant energy scale at achievable cryogenic temperatures of a few hundred millikelvin. We present a general method for augmenting existing instruments into ESR-STMs to investigate spin dynamics in the high-field limit. We demonstrate the performance of the instrument by analysing inelastic tunnelling in a junction driven by a microwave signal and provide proof of principle measurements for ESR-STM.
△ Less
Submitted 10 November, 2021;
originally announced November 2021.
-
Compact microwave kinetic inductance nanowire galvanometer for cryogenic detectors at 4.2 K
Authors:
S. Doerner,
A. Kuzmin,
K. Graf,
S. Wuensch,
I. Charaev,
M. Siegel
Abstract:
We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of cryogenic detectors. The device consists of a lumped-element resonant circuit, fabricated from a single 4-nm-thick superconducting layer of niobium nitride. Thus,…
▽ More
We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of cryogenic detectors. The device consists of a lumped-element resonant circuit, fabricated from a single 4-nm-thick superconducting layer of niobium nitride. Thus, the fabrication and operation is significantly simplified in comparison to state-of-the-art approaches. Because the resonant circuit is inductively coupled to the feed line the current to be measured can directly be injected without having the need of an impedance matching circuit, reducing the system complexity. With the proof-of-concept device we measured a current noise floor δImin of 10 pA/Hz1/2 at 10 kHz. Furthermore, we demonstrate the ability of our sensor to amplify a pulsed response of a superconducting nanowire single-photon detector using a GHz-range carrier for effective frequency-division multiplexing.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
Frequency-Multiplexed bias and readout of a 16-pixel Superconducting Nanowire Single-Photon Detector Array
Authors:
Steffen Doerner,
Artem Kuzmin,
Stefan Wuensch,
Ilya Charaev,
Florian Boes,
Thomas Zwick,
Michael Siegel
Abstract:
We demonstrate a 16-pixel array of radio-frequency superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, reducing the required bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter…
▽ More
We demonstrate a 16-pixel array of radio-frequency superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, reducing the required bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter of the single detectors is discussed. Besides the single pixel measurements we also demonstrate the operation of the 16-pixel array with a temporal, spatial and photon-number resolution.
△ Less
Submitted 28 April, 2017;
originally announced May 2017.
-
Operation of Multi-Pixel Radio-Frequency Superconducting Nanowire Single-Photon Detector Arrays
Authors:
Steffen Doerner,
Artem Kuzmin,
Stefan Wuensch,
Ilya Charaev,
Michael Siegel
Abstract:
The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be operated by only one feed line. Consequently, the system complexity as well as the heat load is significantly reduced. To allocate many pixels into a small bandwidth…
▽ More
The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be operated by only one feed line. Consequently, the system complexity as well as the heat load is significantly reduced. To allocate many pixels into a small bandwidth the quality factor of each device is crucial. In this paper, we present an improved RF-SNSPD design. This new design enables a simple tuning of the quality factor as well as the resonant frequency. With a two-pixel device we have demonstrated the operation without crosstalk between the detectors and showed the time, spatial and photon number resolution. Thereby a single pixel requires only a bandwidth of 14 MHz.
△ Less
Submitted 7 December, 2016;
originally announced December 2016.
-
Hybrid quantum circuit with implanted erbium ions
Authors:
S. Probst,
N. Kukharchyk,
H. Rotzinger,
A. Tkalcec,
S. Wünsch,
A. D. Wieck,
M. Siegel,
A. V. Ustinov,
P. A. Bushev
Abstract:
We report on hybrid circuit QED experiments with focused ion beam implanted Er$^{3+}$ ions in Y$_2$SiO$_5$ coupled to an array of superconducting lumped element microwave resonators. The Y$_2$SiO$_5$ crystal is divided into several areas with distinct erbium doping concentrations, each coupled to a separate resonator. The coupling strength is varied from 5 MHz to 18.7 MHz, while the linewidth rang…
▽ More
We report on hybrid circuit QED experiments with focused ion beam implanted Er$^{3+}$ ions in Y$_2$SiO$_5$ coupled to an array of superconducting lumped element microwave resonators. The Y$_2$SiO$_5$ crystal is divided into several areas with distinct erbium doping concentrations, each coupled to a separate resonator. The coupling strength is varied from 5 MHz to 18.7 MHz, while the linewidth ranges between 50 MHz and 130 MHz. We confirm the paramagnetic properties of the implanted spin ensemble by evaluating the temperature dependence of the coupling. The efficiency of the implantation process is analyzed and the results are compared to a bulk doped Er:Y$_2$SiO$_5$ sample. We demonstrate the successful integration of these engineered erbium spin ensembles with superconducting circuits.
△ Less
Submitted 26 September, 2014;
originally announced September 2014.
-
Probing the TLS Density of States in SiO Films using Superconducting Lumped Element Resonators
Authors:
S. T. Skacel,
Ch. Kaiser,
S. Wuensch,
H. Rotzinger,
A. Lukashenko,
M. Jerger,
G. Weiss,
M. Siegel,
A. V. Ustinov
Abstract:
We have investigated dielectric losses in amorphous SiO thin films under operating conditions of superconducting qubits (mK temperatures and low microwave powers). For this purpose, we have developed a broadband measurement setup employing multiplexed lumped element resonators using a broadband power combiner and a low-noise amplifier. The measured temperature and power dependences of the dielectr…
▽ More
We have investigated dielectric losses in amorphous SiO thin films under operating conditions of superconducting qubits (mK temperatures and low microwave powers). For this purpose, we have developed a broadband measurement setup employing multiplexed lumped element resonators using a broadband power combiner and a low-noise amplifier. The measured temperature and power dependences of the dielectric losses are in good agreement with those predicted for atomic two-level tunneling systems (TLS). By measuring the losses at different frequencies, we found that the TLS density of states is energy dependent. This had not been seen previously in loss measurements. These results contribute to a better understanding of decoherence effects in superconducting qubits and suggest a possibility to minimize TLS-related decoherence by reducing the qubit operation frequency.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.
-
Strong coupling of an Er3+ doped YAlO3 crystal to a superconducting resonator
Authors:
A. Tkalcec,
S. Probst,
D. Rieger,
H. Rotzinger,
S. Wünsch,
N. Kukharchyk,
A. D. Wieck,
M. Siegel,
A. V. Ustinov,
P. Bushev
Abstract:
Quantum memories are integral parts of both quantum computers and quantum communication networks. Naturally, such a memory is embedded into a hybrid quantum architecture, which has to meet the requirements of fast gates, long coherence times and long distance communication. Erbium doped crystals are well suited as a microwave quantum memory for superconducting circuits with additional access to th…
▽ More
Quantum memories are integral parts of both quantum computers and quantum communication networks. Naturally, such a memory is embedded into a hybrid quantum architecture, which has to meet the requirements of fast gates, long coherence times and long distance communication. Erbium doped crystals are well suited as a microwave quantum memory for superconducting circuits with additional access to the optical telecom C-band around 1.55 μm. Here, we report on circuit QED experiments with an Er3+:YAlO3 crystal and demonstrate strong coupling to a superconducting lumped element resonator. The low magnetic anisotropy of the host crystal allows for attaining the strong coupling regime at relatively low magnetic fields, which are compatible with superconducting circuits. In addition, Ce3+ impurities were detected in the crystal, which showed strong coupling as well.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Anisotropic rare-earth spin ensemble strongly coupled to a superconducting resonator
Authors:
S. Probst,
H. Rotzinger,
S. Wünsch,
P. Jung,
M. Jerger,
M. Siegel,
A. V. Ustinov,
P. A. Bushev
Abstract:
Interfacing photonic and solid-state qubits within a hybrid quantum architecture offers a promising route towards large scale distributed quantum computing. Ideal candidates for coherent qubit interconversion are optically active spins magnetically coupled to a superconducting resonator. We report on a cavity QED experiment with magnetically anisotropic Er3+:Y2SiO5 crystals and demonstrate strong…
▽ More
Interfacing photonic and solid-state qubits within a hybrid quantum architecture offers a promising route towards large scale distributed quantum computing. Ideal candidates for coherent qubit interconversion are optically active spins magnetically coupled to a superconducting resonator. We report on a cavity QED experiment with magnetically anisotropic Er3+:Y2SiO5 crystals and demonstrate strong coupling of rare-earth spins to a lumped element resonator. In addition, the electron spin resonance and relaxation dynamics of the erbium spins are detected via direct microwave absorption, without aid of a cavity.
△ Less
Submitted 12 December, 2012;
originally announced December 2012.
-
Highly responsive Y-Ba-Cu-O thin film THz detectors with picosecond time resolution
Authors:
P. Thoma,
J. Raasch,
A. Scheuring,
M. Hofherr,
K. Ilin,
S. Wünsch,
A. Semenov,
H. -W. Hübers,
V. Judin,
A. -S. Müller,
N. Smale,
J. Hänisch,
B. Holzapfel,
M. Siegel
Abstract:
High-temperature superconducting YBa2Cu3O7-d (YBCO) thin-film detectors with improved responsivities were developed for fast time-domain measurements in the THz frequency range. YBCO thin films of 30 nm thickness were patterned to micro- and nanobridges and embedded into planar log-spiral THz antennas. The YBCO thin-film detectors were characterized with continuous wave radiation at 0.65 THz. Resp…
▽ More
High-temperature superconducting YBa2Cu3O7-d (YBCO) thin-film detectors with improved responsivities were developed for fast time-domain measurements in the THz frequency range. YBCO thin films of 30 nm thickness were patterned to micro- and nanobridges and embedded into planar log-spiral THz antennas. The YBCO thin-film detectors were characterized with continuous wave radiation at 0.65 THz. Responsivity values as high as 710 V/W were found for the YBCO nanobridges. Pulsed measurements in the THz frequency range were performed at the electron storage ring ANKA from the Karlsruhe Institute of Technology (KIT). Due to the high responsivities of the nanobridges no biasing was required for the detection of the coherent synchrotron radiation pulses achieving very good agreement between the measured pulse shapes and simulations.
△ Less
Submitted 18 October, 2012;
originally announced October 2012.
-
Infrared photo-response of Fe-shunted Ba-122 thin film microstructures
Authors:
L. Rehm,
D. Henrich,
M. Hofherr,
S. Wuensch,
P. Thoma,
A. Scheuring,
K. Ilin,
M. Siegel,
S. Haindl,
K. Iida,
F Kurth,
B. Holzapfel,
L. Schultz
Abstract:
We present a study of the response to pulsed infrared radiation of Fe-layer shunted pnictide thin film microstructures. The thin film multilayer consisting of 20 nm thick Fe-buffer, 50 nm thick Ba(Fe,Co)2As2 film and gold protection layer were deposited on heated MgO and MgAl2O4 substrates by pulsed-laser deposition. The multilayers were patterned into 5 to 8 um wide and 5 um long microbridges by…
▽ More
We present a study of the response to pulsed infrared radiation of Fe-layer shunted pnictide thin film microstructures. The thin film multilayer consisting of 20 nm thick Fe-buffer, 50 nm thick Ba(Fe,Co)2As2 film and gold protection layer were deposited on heated MgO and MgAl2O4 substrates by pulsed-laser deposition. The multilayers were patterned into 5 to 8 um wide and 5 um long microbridges by electron-beam lithography and ion-milling technique. The microbridges show Tc up to 20 K and a critical current density up to 2.56 MA/cm2 at T = 10 K. The photo-response of Fe-shunted Ba(Fe,Co)2As2 thin film microbridges to infrared radiation was studied in a wide range of incident optical power, operation temperature and bias current. We have found that the electron energy relaxation in studied multilayers is dependent on substrate material and is 1.75 times faster in case of MgAl2O4 characterized by lattice matching to pnictide film in comparison to MgO substrate.
△ Less
Submitted 12 October, 2012;
originally announced October 2012.
-
Non-thermal response of YBCO thin films to picosecond THz pulses
Authors:
P. Probst,
A. Semenov,
M. Ries,
A. Hoehl,
P. Rieger,
A. Scheuring,
V. Judin,
S. Wünsch,
K. Il'in,
N. Smale,
Y. -L. Mathis,
R. Müller,
G. Ulm,
G. Wüstefeld,
H. -W. Hübers,
J. Hänisch,
B. Holzapfel,
M. Siegel,
A. -S. Müller
Abstract:
The photoresponse of YBa2Cu3O7-d thin film microbridges with thicknesses between 15 and 50 nm was studied in the optical and terahertz frequency range. The voltage transients in response to short radiation pulses were recorded in real time with a resolution of a few tens of picoseconds. The bridges were excited by either femtosecond pulses at a wavelength of 0.8 μm or broadband (0.1 - 1.5 THz) pic…
▽ More
The photoresponse of YBa2Cu3O7-d thin film microbridges with thicknesses between 15 and 50 nm was studied in the optical and terahertz frequency range. The voltage transients in response to short radiation pulses were recorded in real time with a resolution of a few tens of picoseconds. The bridges were excited by either femtosecond pulses at a wavelength of 0.8 μm or broadband (0.1 - 1.5 THz) picosecond pulses of coherent synchrotron radiation. The transients in response to optical radiation are qualitatively well explained in the framework of the two-temperature model with a fast component in the picosecond range and a bolometric nanosecond component whose decay time depends on the film thickness. The transients in the THz regime showed no bolometric component and had amplitudes up to three orders of magnitude larger than the two-temperature model predicts. Additionally THz-field dependent transients in the absence of DC bias were observed. We attribute the response in the THz regime to a rearrangement of vortices caused by high-frequency currents.
△ Less
Submitted 12 April, 2012;
originally announced April 2012.
-
Magnetic hysteresis effects in superconducting coplanar microwave resonators
Authors:
Daniel Bothner,
Tobias Gaber,
Matthias Kemmler,
Dieter Koelle,
Reinhold Kleiner,
Stefan Wünsch,
Michael Siegel
Abstract:
We performed transmission spectroscopy experiments on coplanar half wavelength niobium resonators at a temperature T=4.2 K. We observe not only a strong dependence of the quality factor Q and the resonance frequency f_res on an externally applied magnetic field but also on the magnetic history of our resonators, i.e. on the spatial distribution of trapped Abrikosov vortices in the device. We find…
▽ More
We performed transmission spectroscopy experiments on coplanar half wavelength niobium resonators at a temperature T=4.2 K. We observe not only a strong dependence of the quality factor Q and the resonance frequency f_res on an externally applied magnetic field but also on the magnetic history of our resonators, i.e. on the spatial distribution of trapped Abrikosov vortices in the device. We find these results to be valid for a broad range of frequencies and angles between the resonator plane and the magnetic field direction as well as for resonators with and without antidots near the edges of the center conductor and the ground planes. In a detailed analysis we show, that characteristic features of the experimental data can only be reproduced in calculations, if a highly inhomogeneous rf-current density and a flux density gradient with maxima at the edges of the superconductor is assumed. We furthermore demonstrate, that the hysteretic behaviour of the resonator properties can be used to considerably reduce the vortex induced losses and to fine-tune the resonance frequency by the proper way of cycling to a desired magnetic field.
△ Less
Submitted 27 February, 2012;
originally announced February 2012.
-
Weak continuous monitoring of a flux qubit using coplanar waveguide resonator
Authors:
G. Oelsner,
S. H. W. van der Ploeg,
P. Macha,
U. Hübner,
D. Born,
E. Il'ichev,
H. -G. Meyer,
M. Grajcar,
S. Wünsch,
M. Siegel,
A. N. Omelyanchouk,
O. Astafiev
Abstract:
We study a flux qubit in a coplanar waveguide resonator by measuring transmission through the system. In our system with the flux qubit decoupled galvanically from the resonator, the intermediate coupling regime is achieved. In this regime dispersive readout is possible with weak backaction on the qubit. The detailed theoretical analysis and simulations give a good agreement with the experimental…
▽ More
We study a flux qubit in a coplanar waveguide resonator by measuring transmission through the system. In our system with the flux qubit decoupled galvanically from the resonator, the intermediate coupling regime is achieved. In this regime dispersive readout is possible with weak backaction on the qubit. The detailed theoretical analysis and simulations give a good agreement with the experimental data and allow to make the qubit characterization.
△ Less
Submitted 10 May, 2010; v1 submitted 25 October, 2009;
originally announced October 2009.
-
Losses in coplanar waveguide resonators at millikelvin temperatures
Authors:
P. Macha,
S. H. W. van der Ploeg,
G. Oelsner,
E. Il'ichev,
H. -G. Meyer,
S. Wuensch,
M. Siegel
Abstract:
We study the loss rate for a set of lambda/2 coplanar waveguide resonators at millikelvin temperatures (20 mK - 900mK) and different applied powers (3E-19 W - 1E-12 W). The loss rate becomes power independent below a critical power. For a fixed power, the loss rate increases significantly with decreasing temperature. We show that this behavior can be caused by two-level systems in the surroundin…
▽ More
We study the loss rate for a set of lambda/2 coplanar waveguide resonators at millikelvin temperatures (20 mK - 900mK) and different applied powers (3E-19 W - 1E-12 W). The loss rate becomes power independent below a critical power. For a fixed power, the loss rate increases significantly with decreasing temperature. We show that this behavior can be caused by two-level systems in the surrounding dielectric materials. Interestingly, the influence of the two-level systems is of the same order of magnitude for the different material combinations. That leads to the assumption that the nature of these two-level systems is material independent.
△ Less
Submitted 1 November, 2009; v1 submitted 5 October, 2009;
originally announced October 2009.
-
A Simple Passive Scalar Advection-Diffusion Model
Authors:
Scott Wunsch
Abstract:
This paper presents a simple, one-dimensional model of a randomly advected passive scalar. The model exhibits anomalous inertial range scaling for the structure functions constructed from scalar differences. The model provides a simple computational test for recent ideas regarding closure and scaling for randomly advected passive scalars. Results suggest that high order structure function scalin…
▽ More
This paper presents a simple, one-dimensional model of a randomly advected passive scalar. The model exhibits anomalous inertial range scaling for the structure functions constructed from scalar differences. The model provides a simple computational test for recent ideas regarding closure and scaling for randomly advected passive scalars. Results suggest that high order structure function scaling depends on the largest velocity eddy size, and hence scaling exponents may be geometry-dependent and non-universal.
△ Less
Submitted 14 May, 1998;
originally announced May 1998.
