-
Element-specific and high-bandwidth ferromagnetic resonance spectroscopy with a coherent, extreme ultraviolet (EUV) source
Authors:
Michael Tanksalvala,
Anthony Kos,
Jacob Wisser,
Scott Diddams,
Hans T. Nembach,
Justin M. Shaw
Abstract:
We applied a tabletop, ultrafast, high-harmonic generation (HHG) source to measure the element-specific ferromagnetic resonance (FMR) in ultra-thin magnetic alloys and multilayers on an opaque Si substrate. We demonstrate a continuous wave bandwidth of 62 GHz, with promise to extend to 100 GHz or higher. This laboratory-scale instrument detects the FMR using ultrafast, extreme ultraviolet (EUV) li…
▽ More
We applied a tabletop, ultrafast, high-harmonic generation (HHG) source to measure the element-specific ferromagnetic resonance (FMR) in ultra-thin magnetic alloys and multilayers on an opaque Si substrate. We demonstrate a continuous wave bandwidth of 62 GHz, with promise to extend to 100 GHz or higher. This laboratory-scale instrument detects the FMR using ultrafast, extreme ultraviolet (EUV) light, with photon energies spanning the M-edges of most relevant magnetic elements. An RF frequency comb generator is used to produce a microwave excitation that is intrinsically synchronized to the EUV pulses with a timing jitter of 1.1 ps or better. We apply this system to measure the dynamics in a multilayer system as well as Ni-Fe and Co-Fe alloys. Since this instrument operates in reflection-mode, it is a milestone toward measuring and imaging the dynamics of the magnetic state and spin transport of active devices on arbitrary and opaque substrates. The higher bandwidth also enables measurements of materials with high magnetic anisotropy, as well as ferrimagnets, antiferromagnets, and short-wavelength (high wavevector) spinwaves in nanostructures or nanodevices. Furthermore, the coherence and short wavelength of the EUV will enable extending these studies using dynamic nanoscale lensless imaging techniques such as coherent diffractive imaging, ptychography, and holography.
△ Less
Submitted 23 April, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Charge-Spin Interconversion in Epitaxial Pt Probed by Spin-Orbit Torques in a Magnetic Insulator
Authors:
Peng Li,
Lauren J. Riddiford,
Chong Bi,
Jacob J. Wisser,
Xiao-Qi Sun,
Arturas Vailionis,
Michael J. Veit,
Aaron Altman,
Xiang Li,
Mahendra DC,
Shan X. Wang,
Y. Suzuki,
Satoru Emori
Abstract:
We measure spin-orbit torques (SOTs) in a unique model system of all-epitaxial ferrite/Pt bilayers to gain insights into charge-spin interconversion in Pt. With negligible electronic conduction in the insulating ferrite, the crystalline Pt film acts as the sole source of charge-to-spin conversion. A small field-like SOT independent of Pt thickness suggests a weak Rashba-Edelstein effect at the fer…
▽ More
We measure spin-orbit torques (SOTs) in a unique model system of all-epitaxial ferrite/Pt bilayers to gain insights into charge-spin interconversion in Pt. With negligible electronic conduction in the insulating ferrite, the crystalline Pt film acts as the sole source of charge-to-spin conversion. A small field-like SOT independent of Pt thickness suggests a weak Rashba-Edelstein effect at the ferrite/Pt interface. By contrast, we observe a sizable damping-like SOT that depends on the Pt thickness, from which we deduce the dominance of an extrinsic spin-Hall effect (skew scattering) and Dyakonov-Perel spin relaxation in the crystalline Pt film. Furthermore, our results point to a large internal spin-Hall ratio of $\approx$0.8 in epitaxial Pt. Our experimental work takes an essential step towards understanding the mechanisms of charge-spin interconversion and SOTs in Pt-based heterostructures, which are crucial for power-efficient spintronic devices.
△ Less
Submitted 1 June, 2021; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Damping enhancement in coherent ferrite/insulating-paramagnet bilayers
Authors:
Jacob J. Wisser,
Alexander J. Grutter,
Dustin A. Gilbert,
Alpha T. N'Diaye,
Christoph Klewe,
Padraic Shafer,
Elke Arenholz,
Yuri Suzuki,
Satoru Emori
Abstract:
High-quality epitaxial ferrites, such as low-damping MgAl-ferrite (MAFO), are promising nanoscale building blocks for all-oxide heterostructures driven by pure spin current. However, the impact of oxide interfaces on spin dynamics in such heterostructures remains an open question. Here, we investigate the spin dynamics and chemical and magnetic depth profiles of 15-nm-thick MAFO coherently interfa…
▽ More
High-quality epitaxial ferrites, such as low-damping MgAl-ferrite (MAFO), are promising nanoscale building blocks for all-oxide heterostructures driven by pure spin current. However, the impact of oxide interfaces on spin dynamics in such heterostructures remains an open question. Here, we investigate the spin dynamics and chemical and magnetic depth profiles of 15-nm-thick MAFO coherently interfaced with an isostructural $\approx$1-8-nm-thick overlayer of paramagnetic CoCr$_2$O$_4$ (CCO) as an all-oxide model system. Compared to MAFO without an overlayer, effective Gilbert damping in MAFO/CCO is enhanced by a factor of $>$3, irrespective of the CCO overlayer thickness. We attribute this damping enhancement to spin scattering at the $\sim$1-nm-thick chemically disordered layer at the MAFO/CCO interface, rather than spin pumping or proximity-induced magnetism. Our results indicate that damping in ferrite-based heterostructures is strongly influenced by interfacial chemical disorder, even if the thickness of the disordered layer is a small fraction of the ferrite thickness.
△ Less
Submitted 25 October, 2019; v1 submitted 22 August, 2019;
originally announced August 2019.
-
Vortex crossing, trapping and pinning in superconducting nanowires of a NbSe$_2$ two-dimensional crystal
Authors:
Shaun A. Mills,
Jacob J. Wisser,
Chenyi Shen,
Zhuan Xu,
Ying Liu
Abstract:
Nanowires of two-dimensional (2D) crystals of type-II superconductor NbSe$_2$ prepared by electron-beam lithography were studied, focusing on the effect of the motion of Abrikosov vortices. We present magnetoresistance measurements on these nanowires and show features related to vortex crossing, trapping, and pinning. The vortex crossing rate was found to vary non-monotonically with the applied fi…
▽ More
Nanowires of two-dimensional (2D) crystals of type-II superconductor NbSe$_2$ prepared by electron-beam lithography were studied, focusing on the effect of the motion of Abrikosov vortices. We present magnetoresistance measurements on these nanowires and show features related to vortex crossing, trapping, and pinning. The vortex crossing rate was found to vary non-monotonically with the applied field, which results in non-monotonic magnetoresistance variations in agreement with theoretical calculations in the London approximation. Above the lower critical field, $H_{c1}$, the crossing rate is also influenced by vortices trapped by sample boundaries or pinning centers, leading to sample-specific magnetoresistance patterns. We show that the local pinning potential can be modified by intentionally introducing surface adsorbates, making the magnetoresistance pattern a "magneto fingerprint" of the sample-specific configuration of vortex pinning centers in a 2D crystal superconducting nanowire.
△ Less
Submitted 4 February, 2016;
originally announced February 2016.
-
Single-crystal superconducting nanowires of NbSe$_2$ fabricated by reactive plasma etching
Authors:
Shaun A. Mills,
Neal E. Staley,
Jacob J. Wisser,
Chenyi Shen,
Zhuan Xu,
Ying Liu
Abstract:
We present the preparation and measurements of nanowires of single-crystal NbSe$_2$. These nanowires were prepared on ultrathin ($\lesssim10\text{ nm}$) flakes of NbSe$_2$ mechanically exfoliated from a bulk single crystal using a process combining electron beam lithography and reactive plasma etching. The electrical contacts to the nanowires were prepared using Ti/Au. Our technique, which overcom…
▽ More
We present the preparation and measurements of nanowires of single-crystal NbSe$_2$. These nanowires were prepared on ultrathin ($\lesssim10\text{ nm}$) flakes of NbSe$_2$ mechanically exfoliated from a bulk single crystal using a process combining electron beam lithography and reactive plasma etching. The electrical contacts to the nanowires were prepared using Ti/Au. Our technique, which overcomes several limitations of methods developed previously for fabricating superconducting nanowires, also allows for the preparation of complex superconducting nanostructures with a desired geometry. Current-voltage characteristics of individual superconducting single-crystal nanowires with widths down to 30~nm and cross-sectional areas as low as 270 nm$^2$ were measured for the first time.
△ Less
Submitted 23 December, 2013; v1 submitted 7 November, 2013;
originally announced November 2013.
