Showing 1–16 of 16 results for author: Whitehead, J

Graded index lenses for spin wave steering

Authors: N. J. Whitehead, S. A. R. Horsley, T. G. Philbin, V. V. Kruglyak

Abstract: We use micromagnetic modelling to demonstrate the operation of graded index lenses designed to steer forward-volume magnetostatic spin waves by 90 and 180 degrees. The graded index profiles require the refractive index to diverge in the lens center, which, for spin waves, can be achieved by modulating the saturation magnetization or external magnetic field in a ferromagnetic film by a small amount… ▽ More We use micromagnetic modelling to demonstrate the operation of graded index lenses designed to steer forward-volume magnetostatic spin waves by 90 and 180 degrees. The graded index profiles require the refractive index to diverge in the lens center, which, for spin waves, can be achieved by modulating the saturation magnetization or external magnetic field in a ferromagnetic film by a small amount. We also show how the 90$^\circ$ lens may be used as a beam divider. Finally, we analyse the robustness of the lenses to deviations from their ideal profiles. △ Less

Submitted 24 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. B 100, 094404 (2019)

Triangular array of iron-oxide nanoparticles: A simulation study of intra- and inter-particle magnetism

Authors: B. Alkadour, B. W. Southern, J. P. Whitehead, J. van Lierop

Abstract: A study of spherical maghemite nanoparticles on a two dimensional triangular array was carried out using a stochastic Landau-Lifshitz-Gilbert (sLLG) approach. The simulation method was first validated with a triangular array of simple dipoles, where results show the expected phase transition to a ferromagnetic state at a finite temperature. The ground state exhibited a continuous degeneracy that w… ▽ More A study of spherical maghemite nanoparticles on a two dimensional triangular array was carried out using a stochastic Landau-Lifshitz-Gilbert (sLLG) approach. The simulation method was first validated with a triangular array of simple dipoles, where results show the expected phase transition to a ferromagnetic state at a finite temperature. The ground state exhibited a continuous degeneracy that was lifted by an order-from-disorder mechanism at infinitesimal temperatures with the appearance of a six-fold planar anisotropy. The nanoparticle array consisted of 7.5 nm diameter maghemite spheres with bulk-like superexchange interactions between Fe-ions in the core, and weaker exchange between surface Fe-ions and a radial anisotropy. The triangular nanoparticle array ordered at the same reduced temperature as the simple dipole array, but exhibited different behaviour at low temperatures due to the surface anisotropy. We find that the vacancies on the octahedral sites in the nanoparticles combine with the surface anisotropy to produce an effective random temperature-dependent anisotropy for each particle. This leads to a reduction in the net magnetization of the nanoparticle array at zero temperature compared to the simple dipole array. △ Less

Submitted 10 April, 2019; originally announced April 2019.

Comments: 10 pages, 15 figures

Journal ref: Phys. Rev. B 100, 094416 (2019)

A Luneburg lens for spin waves

Authors: N. J. Whitehead, S. A. R. Horsley, T. G. Philbin, V. V. Kruglyak

Abstract: We report on the theory of a Luneburg lens for forward-volume magnetostatic spin waves, and verify its operation via micromagnetic modelling. The lens converts a plane wave to a point source (and vice versa) by a designed graded index, realised here by either modulating the thickness or the saturation magnetization in a circular region. We find that the lens enhances the wave amplitude by 5 times… ▽ More We report on the theory of a Luneburg lens for forward-volume magnetostatic spin waves, and verify its operation via micromagnetic modelling. The lens converts a plane wave to a point source (and vice versa) by a designed graded index, realised here by either modulating the thickness or the saturation magnetization in a circular region. We find that the lens enhances the wave amplitude by 5 times at the lens focus, and 47% of the incident energy arrives in the focus region. Furthermore, small deviations in the profile can still result in good focusing, if the lens index is graded smoothly. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Impact of further-range exchange and cubic anisotropy on magnetic excitations in the fcc kagome antiferromagnet IrMn3

Authors: M. D. LeBlanc, A. A. Aczel, G. E. Granroth, B. W. Southern, J. -Q. Yan, S. E. Nagler, J. P. Whitehead, M. L. Plumer

Abstract: Exchange interactions up to fourth nearest neighbor are shown within a classical local-moment Heisenberg approach to be important to model inelastic neutron scattering data on the fcc kagome antiferromagnet IrMn$_3$. Spin wave frequencies are calculated using the torque equation and the magnetic scattering function, $S({\bf Q},ω)$, is determined by a Green's function method, as an extension of our… ▽ More Exchange interactions up to fourth nearest neighbor are shown within a classical local-moment Heisenberg approach to be important to model inelastic neutron scattering data on the fcc kagome antiferromagnet IrMn$_3$. Spin wave frequencies are calculated using the torque equation and the magnetic scattering function, $S({\bf Q},ω)$, is determined by a Green's function method, as an extension of our previous work, LeBlanc et al, Phys. Rev. B 90, 144403 (2014). Results are compared with intensity contour data on powder samples of ordered IrMn$_3$, where magnetic Mn ions occupy lattice sites of ABC stacked kagome planes. Values of exchange parameters taken from DFT calculations used in our model provide good agreement with the experimental results only if further-neighbor exchange is included. Estimates of the observed energy gap support the existence of strong cubic anisotropy predicted by DFT calculations. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Comments: Submitted to Phys. Rev. B

Journal ref: Phys. Rev. B 104, 014427 (2021)

Encapsulated silicon nitride nanobeam cavity for nanophotonics using layered materials

Authors: Taylor K. Fryett, Yueyang Chen, James Whitehead, Zane Matthew Peycke, Xiaodong Xu, Arka Majumdar

Abstract: Most existing implementations of silicon nitride photonic crystal cavities rely on suspended membranes due to the low refractive index of silicon nitride. Such floating membranes are not mechanically robust, making them suboptimal for developing a hybrid optoelectronic platform where new materials, such as layered 2D materials, are transferred on a pre-existing optical cavity. To address this issu… ▽ More Most existing implementations of silicon nitride photonic crystal cavities rely on suspended membranes due to the low refractive index of silicon nitride. Such floating membranes are not mechanically robust, making them suboptimal for developing a hybrid optoelectronic platform where new materials, such as layered 2D materials, are transferred on a pre-existing optical cavity. To address this issue, we propose a silicon nitride nanobeam resonator design where the silicon nitride membrane is encapsulated by material with a refractive index of ~1.5, such as silicon dioxide or PMMA. The theoretically calculated quality factor of the cavities can be as large as 100,000 , with a mode-volume of 2.5 times the cubic wavelength. We fabricated the cavity, and measured the transmission spectrum with highest quality factor of 7000. We also successfully transferred monolayer tungsten diselenide on the encapsulated silicon nitride nanobeam, and demonstrated coupling of the cavity with the monolayer exciton and the defect emissions. △ Less

Submitted 6 September, 2017; originally announced September 2017.

Theory of Linear Spin Wave Emission from a Bloch Domain Wall

Authors: N. J. Whitehead, S. A. R. Horsley, T. G. Philbin, A. N. Kuchko, V. V. Kruglyak

Abstract: We report an analytical theory of linear emission of exchange spin waves from a Bloch domain wall, excited by a uniform microwave magnetic field. The problem is reduced to a one-dimensional Schrödinger-like equation with a Pöschl-Teller potential and a driving term of the same profile. The emission of plane spin waves is observed at excitation frequencies above a threshold value, as a result of a… ▽ More We report an analytical theory of linear emission of exchange spin waves from a Bloch domain wall, excited by a uniform microwave magnetic field. The problem is reduced to a one-dimensional Schrödinger-like equation with a Pöschl-Teller potential and a driving term of the same profile. The emission of plane spin waves is observed at excitation frequencies above a threshold value, as a result of a linear process. The height-to-width aspect ratio of the Pöschl-Teller profile for a domain wall is found to correspond to a local maximum of the emission efficiency. Furthermore, for a tailored Pöschl-Teller potential with a variable aspect ratio, particular values of the latter can lead to enhanced or even completely suppressed emission. △ Less

Submitted 5 May, 2017; v1 submitted 4 May, 2017; originally announced May 2017.

Comments: added ancillary files

Journal ref: Phys. Rev. B 96, 064415 (2017)

Dipolar ferromagnetism in three-dimensional superlattices of nanoparticles

Authors: B. Alkadour, J. I. Mercer, J. P. Whitehead, B. W. Southern, J. van Lierop

Abstract: A series of atomistic finite temperature simulations on a model of an FCC lattice of maghemite nanoparticles using the stochastic Landau-Lifshitz-Gilbert (sLLG) equation are presented. The model exhibits a ferromagnetic transition that is in good agreement with theoretical expectations. The simulations also reveal an orientational disorder in the orientational order parameter for $T < 0.5 T_c$ due… ▽ More A series of atomistic finite temperature simulations on a model of an FCC lattice of maghemite nanoparticles using the stochastic Landau-Lifshitz-Gilbert (sLLG) equation are presented. The model exhibits a ferromagnetic transition that is in good agreement with theoretical expectations. The simulations also reveal an orientational disorder in the orientational order parameter for $T < 0.5 T_c$ due to pinning of the surface domain walls of the nanoparticles by surface vacancies. The extent of the competition between surface pinning and dipolar interactions provides support for the conjecture that recent measurements on systems of FCC superlattices of iron-oxide nanoparticles provide evidence for dipolar ferromagnetism is discussed. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Kinetic Monte Carlo Simulations of the Effect of the Exchange Control Layer Thickness in CoPtCrB/CoPtCrSiO Granular Media

Authors: Ahmad M. Almudallal, J. I. Mercer, J. P. Whitehead, M. L. Plumer, J. van Ek

Abstract: A hybrid kMC/LLG algorithm is used to simulate experimental MH hysteresis loops for dual layer ECC media. The calculation of the rate coefficients and difficulties arising from low energy barriers, a fundamental problem of the kMC method, are discussed and the methodology used to treat them in the present work is described. The results from simulations are compared with experimental data on dual l… ▽ More A hybrid kMC/LLG algorithm is used to simulate experimental MH hysteresis loops for dual layer ECC media. The calculation of the rate coefficients and difficulties arising from low energy barriers, a fundamental problem of the kMC method, are discussed and the methodology used to treat them in the present work is described. The results from simulations are compared with experimental data on dual layer ECC CoPtCrB/CoPtCrSiO media. A quantitative relationship between the thickness of the exchange control layer and the effective exchange constant between the layers is demonstrated. △ Less

Submitted 20 March, 2017; originally announced March 2017.

Monte Carlo Simulations of ABC Stacked Kagome Lattice Thin Films

Authors: H. V. Yerzhakov, M. L. Plumer, J. P. Whitehead

Abstract: Properties of thin films of geometrically frustrated ABC stacked antiferromagnetic kagome layers are examined using Metropolis Monte Carlo simulations. The impact of having an easy-axis anisotropy on the surface layers and cubic anisotropy in the interior layers is explored. The spin structure at the surface is shown to be different from that of the bulk 3D fcc system, where surface axial anisotro… ▽ More Properties of thin films of geometrically frustrated ABC stacked antiferromagnetic kagome layers are examined using Metropolis Monte Carlo simulations. The impact of having an easy-axis anisotropy on the surface layers and cubic anisotropy in the interior layers is explored. The spin structure at the surface is shown to be different from that of the bulk 3D fcc system, where surface axial anisotropy tends to align spins along the surface [111] normal axis. This alignment tendency then propagates only weakly to the interior layers through exchange coupling. Results are shown for the specific heat, magnetization and sub-lattice order parameters for both surface and interior spins in three and six layer films as a function of increasing axial surface anisotropy. Relevance to the exchange bias phenomenon in IrMn$_3$ thin films is discussed. △ Less

Submitted 20 October, 2015; originally announced October 2015.

Comments: 24 pages, 14 figures

Thermally activated switching at long time scales in exchange-coupled magnetic grains

Authors: Ahmad M. Almudallal, J. I. Mercer, J. P. Whitehead, M. L. Plumer, J. van Ek, T. J. Fal

Abstract: Rate coefficients of the Arrhenius-Neel form are calculated for thermally activated magnetic moment reversal for dual layer exchange-coupled composite (ECC) media based on the Langer formalism and are applied to study the sweep rate dependence of MH hysteresis loops as a function of the exchange coupling I between the layers. The individual grains are modelled as two exchange coupled Stoner-Wohlfa… ▽ More Rate coefficients of the Arrhenius-Neel form are calculated for thermally activated magnetic moment reversal for dual layer exchange-coupled composite (ECC) media based on the Langer formalism and are applied to study the sweep rate dependence of MH hysteresis loops as a function of the exchange coupling I between the layers. The individual grains are modelled as two exchange coupled Stoner-Wohlfarth particles from which the minimum energy paths connecting the minimum energy states are calculated using a variant of the string method and the energy barriers and attempt frequencies calculated as a function of the applied field. The resultant rate equations describing the evolution of an ensemble of non-interacting ECC grains are then integrated numerically in an applied field with constant sweep rate and the magnetization calculated as a function of the applied field H. MH hysteresis loops are presented for a range of values I and a figure of merit (FOM) that quantifies the advantages of ECC media is proposed. The results are also used to examine the accuracy of certain approximate models that reduce the complexity associated with the Langer based formalism and which provide some useful insight into the reversal. Of particular interest is the clustering of minimum energy states that are separated by relatively low energy barriers into "metastates." It is shown that while approximating the reversal process in terms of "metastates" results in little loss of accuracy, it can reduce the run time of a Kinetic Monte Carlo (KMC) simulation of the magnetic decay of an ensemble of dual layer ECC media by 2~3 orders of magnitude. The essentially exact results presented in this work for two coupled grains are analogous to the Stoner-Wohlfarth model of a single grain and serve as an important precursor to KMC based simulation studies on systems of interacting dual layer ECC media. △ Less

Submitted 7 September, 2015; originally announced September 2015.

Comments: 36 pages, 29 figures

Spin waves in the anisotropic fcc kagome antiferromagnet

Authors: M. D. LeBlanc, B. W. Southern, M. L. Plumer, J. P. Whitehead

Abstract: Spin wave calculations demonstrate that the macroscopic continuous degeneracy associated with the two-dimensional kagome Heisenberg spin lattice persists in the case of the stacked fcc structure giving rise to zero energy modes in three dimensions. The addition of an effective local cubic anisotropy is shown to remove this continuous degeneracy and introduce a gap in the spectrum as well as modify… ▽ More Spin wave calculations demonstrate that the macroscopic continuous degeneracy associated with the two-dimensional kagome Heisenberg spin lattice persists in the case of the stacked fcc structure giving rise to zero energy modes in three dimensions. The addition of an effective local cubic anisotropy is shown to remove this continuous degeneracy and introduce a gap in the spectrum as well as modify the inelastic scattering function $S({\bf q},ω)$. This scenario supports earlier Monte Carlo simulations which indicate that the phase transition to long range $q=0$ magnetic order is driven to be discontinuous by critical fluctuations associated with the large degeneracy in the absence of anisotropy, but becomes continuous with the addition of anisotropy. The results are relevant to Ir-Mn alloys which are widely used in the magnetic storage industry in thin film form as the antiferromagnetic pinning layer in spin-valve structures. △ Less

Submitted 25 March, 2014; originally announced March 2014.

Comments: 11 pages, 3 figures

Micromagnetic simulations of sweep-rate dependent coercivity in perpendicular recording media

Authors: M. L. Plumer, M. D. Leblanc, J. P. Whitehead, J. van Ek

Abstract: The results of micromagnetic simulations are presented which examine the impact of thermal fluctuations on sweep rate dependent coercivities of both single-layer and exchange-coupled-composite (ECC) perpendicular magnetic recording media. M-H loops are calculated at four temperatures and sweep rates spanning five decades with fields applied normal to the plane and at 45 degrees. The impact of inte… ▽ More The results of micromagnetic simulations are presented which examine the impact of thermal fluctuations on sweep rate dependent coercivities of both single-layer and exchange-coupled-composite (ECC) perpendicular magnetic recording media. M-H loops are calculated at four temperatures and sweep rates spanning five decades with fields applied normal to the plane and at 45 degrees. The impact of interactions between grains is evaluated. The results indicate a significantly weaker sweep-rate dependence for ECC media suggesting more robustness to long-term thermal effects. Fitting the modeled results to Sharrock-like scaling proposed by Feng and Visscher [J. Appl. Phys. 95, 7043 (2004)] is successful only in the case of single-layer media with the field normal to the plane. △ Less

Submitted 15 March, 2012; originally announced March 2012.

Comments: 7 pages, 14 figures

Atomic level micromagnetic model of recording media switching at elevated temperatures

Authors: J. I. Mercer, M. L. Plumer, J. P. Whitehead, anf J. van Ek

Abstract: An atomic level micromagnetic model of granular recording media is developed and applied to examine external field-induced grain switching at elevated temperatures which captures non-uniform reversal modes. The results are compared with traditional methods which employ the Landau-Lifshitz-Gilbert equations based on uniformly magnetized grains with assigned intrinsic temperature profiles for… ▽ More An atomic level micromagnetic model of granular recording media is developed and applied to examine external field-induced grain switching at elevated temperatures which captures non-uniform reversal modes. The results are compared with traditional methods which employ the Landau-Lifshitz-Gilbert equations based on uniformly magnetized grains with assigned intrinsic temperature profiles for $M(T)$ and $K(T)$. Using nominal parameters corresponding to high-anisotropy FePt-type media envisioned for Energy Assisted Magnetic Recording, our results demonstrate that atomic-level reversal slightly reduces the field required to switch grains at elevated temperatures, but results in larger fluctuations, when compared to a uniformly magnetized grain model. △ Less

Submitted 6 February, 2012; originally announced February 2012.

Comments: 4 pages, 5 figures

Journal ref: Appl. Phys. Lett., vol. 98, p. 192508 (2011)

Monte Carlo simulations of magnetic ordering in the fcc Kagome lattice

Authors: V. Hemmati, M. L. Plumer, J. P. Whitehead, B. W. Southern

Abstract: Monte Carlo simulation results are reported on magnetic ordering in ABC stacked Kagomé layers with fcc symmetry for both XY and Heisenberg models which include exchange interactions with the eight near-neighbors. Well known degeneracies of the 2D system persist in the 3D case and analysis of the numerical data provides strong evidence for a fluctuation-driven first-order transition to well-defined… ▽ More Monte Carlo simulation results are reported on magnetic ordering in ABC stacked Kagomé layers with fcc symmetry for both XY and Heisenberg models which include exchange interactions with the eight near-neighbors. Well known degeneracies of the 2D system persist in the 3D case and analysis of the numerical data provides strong evidence for a fluctuation-driven first-order transition to well-defined long-range order characterized as the layered $q=0$ (120-degree) spin structure. Effects of varying the inter-layer coupling are also examined. The results are relevant to understanding the role of frustration in IrMn$_3$ alloys widely used by the magnetic storage industry as thin-films in the antiferromagnetic pinning layer in GMR and TMR spin valves. Despite the technological importance of this structure, it has not previously been noted that the magnetic Mn-ions of fcc IrMn$_3$ form Kagomé layers. △ Less

Submitted 24 January, 2012; originally announced January 2012.

Comments: 9 pages, 14 figures. Submitted to Phys. Rev. B

Micromagnetic simulations of interacting dipoles on a fcc lattice: Application to nanoparticle assemblies

Authors: M L Plumer, J van Lierop, B W Southern, J P Whitehead

Abstract: Micromagnetic simulations are used to examine the effects of cubic and axial anisotropy, magnetostatic interactions and temperature on M-H loops for a collection of magnetic dipoles on fcc and sc lattices. We employ a simple model of interacting dipoles that represent single-domain particles in an attempt to explain recent experimental data on ordered arrays of magnetoferritin nanoparticles that d… ▽ More Micromagnetic simulations are used to examine the effects of cubic and axial anisotropy, magnetostatic interactions and temperature on M-H loops for a collection of magnetic dipoles on fcc and sc lattices. We employ a simple model of interacting dipoles that represent single-domain particles in an attempt to explain recent experimental data on ordered arrays of magnetoferritin nanoparticles that demonstrate the crucial role of interactions between particles in a fcc lattice. Significant agreement between the simulation and experimental results is achieved, and the impact of intra-particle degrees of freedom and surface effects on thermal fluctuations are investigated. △ Less

Submitted 13 September, 2010; originally announced September 2010.

Comments: 10 pages, 9 figures

Journal ref: J. Phys.: Cond. Mat. 22, 296007 (2010)

Chemical vapour deposition synthetic diamond: materials, technology and applications

Authors: R S Balmer, J R Brandon, S L Clewes, H K Dhillon, J M Dodson, I Friel, P N Inglis, T D Madgwick, M L Markham, T P Mollart, N Perkins, G A Scarsbrook, D J Twitchen, A J Whitehead, J J Wilman, S M Woollard

Abstract: Substantial developments have been achieved in the synthesis of chemical vapour deposition (CVD) diamond in recent years, providing engineers and designers with access to a large range of new diamond materials. CVD diamond has a number of outstanding material properties that can enable exceptional performance in applications as diverse as medical diagnostics, water treatment, radiation detection… ▽ More Substantial developments have been achieved in the synthesis of chemical vapour deposition (CVD) diamond in recent years, providing engineers and designers with access to a large range of new diamond materials. CVD diamond has a number of outstanding material properties that can enable exceptional performance in applications as diverse as medical diagnostics, water treatment, radiation detection, high power electronics, consumer audio, magnetometry and novel lasers. Often the material is synthesized in planar form, however non-planar geometries are also possible and enable a number of key applications. This article reviews the material properties and characteristics of single crystal and polycrystalline CVD diamond, and how these can be utilized, focusing particularly on optics, electronics and electrochemistry. It also summarizes how CVD diamond can be tailored for specific applications, based on the ability to synthesize a consistent and engineered high performance product. △ Less

Submitted 7 September, 2009; originally announced September 2009.

Comments: 51 pages, 16 figures

Journal ref: R S Balmer et al 2009 J. Phys.: Condens. Matter 21 364221