-
On the transport of CO$_2$ through humidified facilitated transport membranes
Authors:
M. Logemann,
J. Gujt,
T. Harhues,
T. D. Kühne,
M. Wessling
Abstract:
Membrane-based CO$_2$ removal from exhaust streams has recently gained much attention as a means of reducing emissions and limiting climate change. Novel membranes for CO$_2$ removal include so called facilitated transport membranes (FTMs), which offer very high selectivities for CO$_2$ while maintaining decent permeabilities. Recently, these FTMs have been scaled up from laboratory level to plant…
▽ More
Membrane-based CO$_2$ removal from exhaust streams has recently gained much attention as a means of reducing emissions and limiting climate change. Novel membranes for CO$_2$ removal include so called facilitated transport membranes (FTMs), which offer very high selectivities for CO$_2$ while maintaining decent permeabilities. Recently, these FTMs have been scaled up from laboratory level to plant-sized pilot modules with promising results. However, the molecular details of CO$_2$ transport in these has not yet been fully unraveled. In this work, experimental studies were combined with quantum-mechanical ab initio molecular dynamics simulations to gain insight into the underlying molecular mechanism of CO$_2$ permeation through FTMs. Various compositions of polyvinyl alcohol (PVA) as the membrane matrix with polyvinyl amine (PVAm), monoethanolamine (MEA), or 4-amino-1-butanol (BA) as carrier molecules were experimentally tested. Our experiments revealed that water was essential for the CO$_2$ transport and a transport superposition was achieved with a mixed composition of PVAm and MEA in PVA. Furthermore, sorption measurements with PVA were conducted with humidified N$_2$ and CO$_2$ to quantify water sorption-induced swelling and its contribution to the gas uptake. As the carbonic acid--amine interaction is assumed to cause transport facilitation, electronic structure-based ab initio molecular dynamics simulations were conducted to study the transport of CO$_2$ in the form of carbonic acid along PVAm polymer chains. In particular, the necessity of local water for transport facilitation was studied at different water contents. The simulations show that transport is fastest in the system with low water content and does not happen in the absence of water.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
PECVD and PEALD on polymer substrates (Part II): Understanding and tuning of barrier and membrane properties of thin films
Authors:
Teresa de los Arcos,
Peter Awakowicz,
Marc Böke,
Nils Boysen,
Ralf Peter Brinkmann,
Rainer Dahlmann,
Anjana Devi,
Denis Eremin,
Jonas Franke,
Tobias Gergs,
Jonathan Jenderny,
Efe Kemaneci,
Thomas D. Kühne,
Simon Kusmierz,
Thomas Mussenbrock,
Jens Rubner,
Jan Trieschmann,
Matthias Wessling,
Xiaofan Xie,
David Zanders,
Frederik Zysk,
Guido Grundmeier
Abstract:
This feature article presents insights concerning the correlation of PECVD and PEALD thin film structures with their barrier or membrane properties. While in principle similar precursor gases and processes can be applied, the adjustment of deposition parameters for different polymer substrates can lead to either an effective diffusion barrier or selective permeabilities. In both cases the understa…
▽ More
This feature article presents insights concerning the correlation of PECVD and PEALD thin film structures with their barrier or membrane properties. While in principle similar precursor gases and processes can be applied, the adjustment of deposition parameters for different polymer substrates can lead to either an effective diffusion barrier or selective permeabilities. In both cases the understanding of the film growth and the analysis of the pore size distribution and the pore surface chemistry is of utmost importance for the understanding of the related transport properties of small molecules. In this regard the article presents both concepts of thin film engineering and analytical as well as theoretical approaches leading to a comprehensive description of the state of the art in this field. Moreover, based on the presented correlation of film structure and molecular transport properties perspectives of future relevant research in this area is presented.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
What are the microscopic events of colloidal membrane fouling?
Authors:
Johannes Lohaus,
Yannic Martin Perez,
Matthias Wessling
Abstract:
Due to the complex interplay between surface adsorption and hydrodynamic interactions, representative microscopic mechanisms of colloidal membrane fouling are still not well understood. Numerical simulations overcome experimental limitations such as the temporal and spatial resolution of microscopic events during colloidal membrane fouling: they help to gain deeper insight into fouling processes.…
▽ More
Due to the complex interplay between surface adsorption and hydrodynamic interactions, representative microscopic mechanisms of colloidal membrane fouling are still not well understood. Numerical simulations overcome experimental limitations such as the temporal and spatial resolution of microscopic events during colloidal membrane fouling: they help to gain deeper insight into fouling processes. This study uses coupled computational fluid dynamics - discrete element methods (CFD-DEM) simulations to examine mechanisms of colloidal fouling in a microfluidic architecture mimicking a porous microfiltration membrane. We pay special attention to how particles can overcome energy barriers leading to adsorption and desorption with each other and with the external and internal membrane surface. Interparticle interaction leads to a transition from the secondary to the primary minimum of the DLVO potential. Adsorbed particles can show re-entrainment or they can glide downstream. Since particles mainly re-suspend as clusters, the inner pore geometry significantly affects the fouling behavior. The findings allow a basic understanding of microscopic fouling events during colloidal filtration. The methodology enables future systematic studies on the interplay of hydrodynamic conditions and surface energy contributions represented by potentials for soft and patchy colloids.
△ Less
Submitted 21 March, 2018;
originally announced March 2018.
-
Ultrafiltration of charge-stabilized dispersions at low salinity
Authors:
Rafael Roa,
Daniel Menne,
Jonas Riest,
Pompilia Buzatu,
Emiliy K. Zholkovskiy,
Jan K. G. Dhont,
Matthias Wessling,
Gerhard Nägele
Abstract:
We present a comprehensive study of cross-flow ultrafiltration (UF) of charge-stabilized suspensions, under low-salinity conditions of electrostatically strongly repelling colloidal particles. The axially varying permeate flux, near-membrane concentration-polarization (CP) layer and osmotic pressure profiles are calculated using a macroscopic diffusion-advection boundary layer method, and are comp…
▽ More
We present a comprehensive study of cross-flow ultrafiltration (UF) of charge-stabilized suspensions, under low-salinity conditions of electrostatically strongly repelling colloidal particles. The axially varying permeate flux, near-membrane concentration-polarization (CP) layer and osmotic pressure profiles are calculated using a macroscopic diffusion-advection boundary layer method, and are compared with filtration experiments on aqueous suspensions of charge-stabilized silica particles. The theoretical description based on the one-component macroion fluid model (OCM) accounts for the strong influence of surface-released counterions on the renormalized colloid charge and suspension osmotic compressibility, and for the influence of the colloidal hydrodynamic interactions and electric double layer repulsion on the concentration-dependent suspension viscosity $η$, and collective diffusion coefficient $D_c$. A strong electro-hydrodynamic enhancement of $D_c$ and $η$, and likewise of the osmotic pressure is predicted theoretically, as compared with their values for a hard-sphere suspension. We also point to the failure of generalized Stokes-Einstein relations describing reciprocal relations between $D_c$ and $η$. According to our filtration model, $D_c$ is of dominant influence, giving rise to an only weakly developed CP layer having practically no effect on the permeate flux. This prediction is quantitatively confirmed by our UF measurements of the permeate flux using an aqueous suspension of charged silica spheres as the feed system. The experimentally detected fouling for the largest considered transmembrane pressure values is shown not to be due to filter cake formation by crystallization or vitrification.
△ Less
Submitted 18 May, 2016; v1 submitted 18 March, 2016;
originally announced March 2016.
-
Evaporation-triggered Wetting Transition for Water Droplets upon Hydrophobic Microstructures
Authors:
Peichun Tsai,
Rob G. H. Lammertink,
Matthias Wessling,
Detlef Lohse
Abstract:
When placed on rough hydrophobic surfaces, water droplets of diameter larger than a few millimeters can easily form pearls, as they are in the Cassie-Baxter state with air pockets trapped underneath the droplet. Intriguingly, a natural evaporating process can drive such a Fakir drop into a completely wetting (Wenzel) state. Our microscopic observations with simultaneous side and bottom views of…
▽ More
When placed on rough hydrophobic surfaces, water droplets of diameter larger than a few millimeters can easily form pearls, as they are in the Cassie-Baxter state with air pockets trapped underneath the droplet. Intriguingly, a natural evaporating process can drive such a Fakir drop into a completely wetting (Wenzel) state. Our microscopic observations with simultaneous side and bottom views of evaporating droplets upon transparent hydrophobic microstructures elucidate the water-filling dynamics and the mechanism of this evaporation-triggered transition. For the present material the wetting transition occurs when the water droplet size decreases to a few hundreds of micrometers in radius. We present a general global energy argument which estimates the interfacial energies depending on the drop size and can account for the critical radius for the transition.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
Dynamics of the spontaneous breakdown of superhydrophobicity
Authors:
C. Pirat,
M. Sbragaglia,
A. M. Peters,
B. M. Borkent,
R. G. H. Lammertink,
M. Wessling,
D. Lohse
Abstract:
Drops deposited on rough and hydrophobic surfaces can stay suspended with gas pockets underneath the liquid, then showing very low hydrodynamic resistance. When this superhydrophobic state breaks down, the subsequent wetting process can show different dynamical properties. A suitable choice of the geometry can make the wetting front propagate in a stepwise manner leading to {\it square-shaped} w…
▽ More
Drops deposited on rough and hydrophobic surfaces can stay suspended with gas pockets underneath the liquid, then showing very low hydrodynamic resistance. When this superhydrophobic state breaks down, the subsequent wetting process can show different dynamical properties. A suitable choice of the geometry can make the wetting front propagate in a stepwise manner leading to {\it square-shaped} wetted area: the front propagation is slow and the patterned surface fills by rows through a {\it zipping} mechanism. The multiple time scale scenario of this wetting process is experimentally characterized and compared to numerical simulations.
△ Less
Submitted 21 August, 2007; v1 submitted 20 August, 2007;
originally announced August 2007.
-
Spontaneous Breakdown of Superhydrophobicity
Authors:
Mauro Sbragaglia,
Alisia M. Peters,
Christophe Pirat,
Bram M. Borkent,
Rob G. H. Lammertink,
Matthias Wessling,
Detlef Lohse
Abstract:
In some cases water droplets can completely wet micro-structured superhydrophobic surfaces. The {\it dynamics} of this rapid process is analyzed by ultra-high-speed imaging. Depending on the scales of the micro-structure, the wetting fronts propagate smoothly and circularly or -- more interestingly -- in a {\it stepwise} manner, leading to a growing {\it square-shaped} wetted area: entering a ne…
▽ More
In some cases water droplets can completely wet micro-structured superhydrophobic surfaces. The {\it dynamics} of this rapid process is analyzed by ultra-high-speed imaging. Depending on the scales of the micro-structure, the wetting fronts propagate smoothly and circularly or -- more interestingly -- in a {\it stepwise} manner, leading to a growing {\it square-shaped} wetted area: entering a new row perpendicular to the direction of front propagation takes milliseconds, whereas once this has happened, the row itself fills in microseconds ({\it ``zipping''})
△ Less
Submitted 31 August, 2007; v1 submitted 29 May, 2007;
originally announced May 2007.
