-
Direct measurement of the local electrocaloric effect in 2D ferroelectric In${}_2$Se${}_3$ by Scanning Electrocaloric Thermometry
Authors:
Jean Spièce,
Valentin Fonck,
Charalambos Evangeli,
Phil S. Dobson,
Jonathan M. R. Weaver,
Pascal Gehring
Abstract:
The electrocaloric effect refers to the temperature change in a material when an electric field is applied or removed. Significant breakthroughs revealed its potential for solid-state cooling technologies in past decades. These devices offer a sustainable alternative to traditional vapor compression refrigeration, with advantages such as compactness, silent operation, and the absence of moving par…
▽ More
The electrocaloric effect refers to the temperature change in a material when an electric field is applied or removed. Significant breakthroughs revealed its potential for solid-state cooling technologies in past decades. These devices offer a sustainable alternative to traditional vapor compression refrigeration, with advantages such as compactness, silent operation, and the absence of moving parts or refrigerants.
Electrocaloric effects are typically studied using indirect methods using polarization data, and which suffer from inaccuracies related to assumptions about heat capacity. Direct methods, although more precise, require device fabrication and face challenges in studying meso- or nanoscale systems, like 2D materials, and materials with non-uniform polarization textures where high spatial resolution is required.
In this study, a novel technique, Scanning Electrocaloric Thermometry, is introduced for characterizing the local electrocaloric effect in nanomaterials. This approach achieves high spatial resolution by locally applying electric fields and by simultaneously measuring the resulting temperature change. By employing AC excitation, the measurement sensitivity is further enhanced and the electrocaloric effect is disentangled from other heating mechanisms such as Joule heating and dielectric losses. The effectiveness of the method is demonstrated by examining electrocaloric and heat dissipation phenomena in two-dimensional In${}_2$Se${}_3$ micrometer-sized flakes.
△ Less
Submitted 20 December, 2024;
originally announced December 2024.
-
The persistence of spin coherence in a crystalline environment
Authors:
Gerald Curran III,
Zachary Rex,
Casper X. Wilson,
Luke J. Weaver,
Ivan Biaggio
Abstract:
We analyze quantum interference in the triplet-exciton pair generated by singlet exciton fission in a molecular crystal, and introduce transport-induced dephasing (TID) as a key effect that can suppress the expected fluorescence quantum beats when the triplet-exciton wavefunction can localize on inequivalent sites. TID depends on the triplet-exciton hopping rate between inequivalent sites and on t…
▽ More
We analyze quantum interference in the triplet-exciton pair generated by singlet exciton fission in a molecular crystal, and introduce transport-induced dephasing (TID) as a key effect that can suppress the expected fluorescence quantum beats when the triplet-exciton wavefunction can localize on inequivalent sites. TID depends on the triplet-exciton hopping rate between inequivalent sites and on the energy-shifts among the stationary states of the entangled triplet pair in different spatial configurations. The theoretical model is confirmed by experiments in rubrene single crystals, where triplet pairs remain entangled for more than 50 ns but quantum beats are suppressed by TID within a few nanoseconds when the magnetic field is misaligned by just a few degrees from specific symmetric directions. Our experiments deliver the zero-field parameters for the rubrene molecule in its orthorhombic lattice and information on triplet-exciton transport, in particular the triplet-exciton hopping rate between inequivalent sites, which we evaluate to be of the order of 150 ps in rubrene.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Record-high Anomalous Ettingshausen effect in a micron-sized magnetic Weyl semimetal on-chip cooler
Authors:
Mohammadali Razeghi,
Jean Spiece,
Valentin Fonck,
Yao Zhang,
Michael Rohde,
Rikkie Joris,
Philip S. Dobson,
Jonathan M. R. Weaver,
Lino da Costa Pereira,
Simon Granville,
Pascal Gehring
Abstract:
Solid-state cooling devices offer compact, quiet, reliable and environmentally friendly solutions that currently rely primarily on the thermoelectric (TE) effect. Despite more than two centuries of research, classical thermoelectric coolers suffer from low efficiency which hampers wider application. In this study, the less researched Anomalous Ettingshausen effect (AEE), a transverse thermoelectri…
▽ More
Solid-state cooling devices offer compact, quiet, reliable and environmentally friendly solutions that currently rely primarily on the thermoelectric (TE) effect. Despite more than two centuries of research, classical thermoelectric coolers suffer from low efficiency which hampers wider application. In this study, the less researched Anomalous Ettingshausen effect (AEE), a transverse thermoelectric phenomenon, is presented as a new approach for on-chip cooling. This effect can be boosted in materials with non-trivial band topologies as demonstrated in the Heusler alloy $\text{Co}_2\text{MnGa}$. Enabled by the high quality of our material, in situ scanning thermal microscopy experiments reveal a record-breaking anomalous Ettingshausen coefficient of $-2.1$~mV in $μ$m-sized on-chip cooling devices at room temperature. A significant 44\% of the effect is contributed by the intrinsic topological properties, in particular the Berry curvature of $\text{Co}_2\text{MnGa}$, emphasising the unique potential of magnetic Weyl semimetals for high-performance spot cooling in nanostructures.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Post deposition interfacial Néel temperature tuning in magnetoelectric B:Cr2O3
Authors:
Ather Mahmood,
Jamie Weaver,
Syed Qamar Abbas Shah,
Will Echtenkamp,
Jeffrey W. Lynn,
Peter A. Dowben,
Christian Binek
Abstract:
Boron (B) alloying transforms the magnetoelectric antiferromagnet Cr2O3 into a multifunctional single-phase material which enables electric field driven π/2 rotation of the Néel vector. Nonvolatile, voltage-controlled Néel vector rotation is a much-desired material property in the context of antiferromagnetic spintronics enabling ultra-low power, ultra-fast, nonvolatile memory, and logic device ap…
▽ More
Boron (B) alloying transforms the magnetoelectric antiferromagnet Cr2O3 into a multifunctional single-phase material which enables electric field driven π/2 rotation of the Néel vector. Nonvolatile, voltage-controlled Néel vector rotation is a much-desired material property in the context of antiferromagnetic spintronics enabling ultra-low power, ultra-fast, nonvolatile memory, and logic device applications. Néel vector rotation is detected with the help of heavy metal (Pt) Hall-bars in proximity of pulsed laser deposited B:Cr2O3 films. To facilitate operation of B:Cr2O3-based devices in CMOS environments, the Néel temperature, TN, of the functional film must be tunable to values significantly above room temperature. Cold neutron depth profiling and x-ray photoemission spectroscopy depth profiling reveal thermally activated B-accumulation at the B:Cr2O3/ vacuum interface in thin films deposited on Al2O3 substrates. We attribute the B-enrichment to surface segregation. Magnetotransport data confirm B-accumulation at the interface within a layer of about 50 nm thick where the device properties reside. Here TN enhances from 334 K prior to annealing, to 477 K after annealing for several hours. Scaling analysis determines TN as a function of the annealing temperature. Stability of post-annealing device properties is evident from reproducible Néel vector rotation at 370 K performed over the course of weeks.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Single-material MoS$_{2}$ thermoelectric junction enabled by substrate engineering
Authors:
Mohammadali Razeghi,
Jean Spiece,
Oğuzhan Oğuz,
Doruk Pehlivanoğlu,
Yubin Huang,
Ali Sheraz,
Phillip S. Dobson,
Jonathan M. R. Weaver,
Pascal Gehring,
T. Serkan Kasırga
Abstract:
To realize a thermoelectric power generator, typically a junction between two materials with different Seebeck coefficient needs to be fabricated. Such difference in Seebeck coefficients can be induced by doping, which renders difficult when working with two-dimensional (2d) materials. Here, we employ substrate effects to form a thermoelectric junction in ultra-thin few-layer MoS2 films. We invest…
▽ More
To realize a thermoelectric power generator, typically a junction between two materials with different Seebeck coefficient needs to be fabricated. Such difference in Seebeck coefficients can be induced by doping, which renders difficult when working with two-dimensional (2d) materials. Here, we employ substrate effects to form a thermoelectric junction in ultra-thin few-layer MoS2 films. We investigated the junctions with a combination of scanning photocurrent microscopy and scanning thermal microscopy. This allows us to reveal that thermoelectric junctions form across the substrate-engineered parts. We attribute this to a gating effect induced by interfacial charges in combination with alterations in the electron-phonon scattering mechanisms. This work demonstrates that substrate engineering is a promising strategy to develop future compact thin-film thermoelectric power generators.
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Active entanglement enables stochastic, topological grasping
Authors:
Kaitlyn Becker,
Clark Teeple,
Nicholas Charles,
Yeonsu Jung,
Daniel Baum,
James C. Weaver,
L. Mahadevan,
Robert Wood
Abstract:
Grasping, in both biological and engineered mechanisms, can be highly sensitive to the gripper and object morphology, as well as perception, and motion planning. Here we circumvent the need for feedback or precise planning by using an array of fluidically-actuated slender hollow elastomeric filaments to actively entangle with objects that vary in geometric and topological complexity. The resulting…
▽ More
Grasping, in both biological and engineered mechanisms, can be highly sensitive to the gripper and object morphology, as well as perception, and motion planning. Here we circumvent the need for feedback or precise planning by using an array of fluidically-actuated slender hollow elastomeric filaments to actively entangle with objects that vary in geometric and topological complexity. The resulting stochastic interactions enable a unique soft and conformable grasping strategy across a range of target objects that vary in size, weight, and shape. We experimentally evaluate the grasping performance of our strategy, and use a computational framework for the collective mechanics of flexible filaments in contact with complex objects to explain our findings. Overall, our study highlights how active collective entanglement of a filament array via an uncontrolled, spatially distributed scheme provides new options for soft, adaptable grasping.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
Demonstration of a laser powder bed fusion combinatorial sample for high-throughput microstructure and indentation characterization
Authors:
Jordan S. Weaver,
Adam L. Pintar,
Carlos Beauchamp,
Howie Joress,
Kil-Won Moon,
Thien Q. Phan
Abstract:
High-throughput experiments that use combinatorial samples with rapid measurements can be used to provide process-structure-property information at reduced time, cost, and effort. Developing these tools and methods is essential in additive manufacturing where new process-structure-property information is required on a frequent basis as advances are made in feedstock materials, additive machines, a…
▽ More
High-throughput experiments that use combinatorial samples with rapid measurements can be used to provide process-structure-property information at reduced time, cost, and effort. Developing these tools and methods is essential in additive manufacturing where new process-structure-property information is required on a frequent basis as advances are made in feedstock materials, additive machines, and post-processing. Here we demonstrate the design and use of combinatorial samples produced on a commercial laser powder bed fusion system to study 60 distinct process conditions of nickel superalloy 625: five laser powers and four laser scan speeds in three different conditions. Combinatorial samples were characterized using optical and electron microscopy, x-ray diffraction, and indentation to estimate the porosity, grain size, crystallographic texture, secondary phase precipitation, and hardness. Indentation and porosity results were compared against a regular sample. The smaller-sized regions (3 mm x 4 mm) in the combinatorial sample have a lower hardness compared to a larger regular sample (20 mm x 20 mm) with similar porosity (< 0.03 %). Despite this difference, meaningful trends were identified with the combinatorial sample for grain size, crystallographic texture, and porosity versus laser power and scan speed as well as trends with hardness versus stress-relief condition.
△ Less
Submitted 3 August, 2021; v1 submitted 2 March, 2021;
originally announced March 2021.
-
Resonant Excitation and Purcell Enhancement of Coherent Nitrogen-Vacancy Centers Coupled to a Fabry-Pérot Micro-Cavity
Authors:
Maximilian Ruf,
Matthew J. Weaver,
Suzanne B. van Dam,
Ronald Hanson
Abstract:
The nitrogen-vacancy (NV) center in diamond has been established as a prime building block for quantum networks. However, scaling beyond a few network nodes is currently limited by low spin-photon entanglement rates, resulting from the NV center's low probability of coherent photon emission and collection. Integration into a cavity can boost both values via the Purcell effect, but poor optical coh…
▽ More
The nitrogen-vacancy (NV) center in diamond has been established as a prime building block for quantum networks. However, scaling beyond a few network nodes is currently limited by low spin-photon entanglement rates, resulting from the NV center's low probability of coherent photon emission and collection. Integration into a cavity can boost both values via the Purcell effect, but poor optical coherence of near-surface NV centers has so far prevented their resonant optical control, as would be required for entanglement generation. Here, we overcome this challenge, and demonstrate resonant addressing of individual, fiber-cavity-coupled NV centers, and collection of their Purcell-enhanced coherent photon emission. Utilizing off-resonant and resonant addressing protocols, we extract Purcell factors of up to 4, consistent with a detailed theoretical model. This model predicts that the probability of coherent photon detection per optical excitation can be increased to 10% for realistic parameters - an improvement over state-of-the art solid immersion lens collection systems by two orders of magnitude. The resonant operation of an improved optical interface for single coherent quantum emitters in a closed-cycle cryogenic system at T $\sim$ 4 K is an important result towards extensive quantum networks with long coherence.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Geometric localization in supported elastic struts
Authors:
Thomas C. T. Michaels,
Remy Kusters,
Alexander J. Dear,
Cornelis Storm,
James C. Weaver,
L. Mahadevan
Abstract:
Localized deformation patterns are a common motif in morphogenesis and are increasingly finding widespread applications in materials science, for instance as memory devices. Here we describe the emergence of spatially localized deformations in a minimal mechanical system by exploring the impact of growth and shear on the conformation of a semi-flexible filament connected to a pliable shearable sub…
▽ More
Localized deformation patterns are a common motif in morphogenesis and are increasingly finding widespread applications in materials science, for instance as memory devices. Here we describe the emergence of spatially localized deformations in a minimal mechanical system by exploring the impact of growth and shear on the conformation of a semi-flexible filament connected to a pliable shearable substrate. We combine numerical simulations of a discrete rod model with theoretical analysis of the differential equations recovered in the continuum limit to quantify (in the form of scaling laws) how geometry, mechanics, and growth act together to give rise to such localized structures in this system. We find that spatially localized deformations along the filament emerge for intermediate shear modulus and increasing growth. Finally, we use experiments on a 3D printed multi-material model system to demonstrate that external control of the amount of shear and growth regulates the spatial extent of the localized strain texture.
△ Less
Submitted 11 June, 2019;
originally announced June 2019.
-
Direct comparison of domain wall behavior in Permalloy nanowires patterned by electron beam lithography and focused ion beam milling
Authors:
M. A. Basith,
S. McVitie,
D. McGrouther,
J. N. Chapman,
J. M. R. Weaver
Abstract:
Nominally identical permalloy nanowires, with widths down to 150 nm, were fabricated onto a single electron transparent Si$_{3}$N$_{4}$ membrane using electron beam lithography (EBL) and focused ion beam (FIB) milling. Transmission electron microscopy (TEM) experiments were performed to compare the nanostructures produced by these two techniques in what we believe is the first direct comparison of…
▽ More
Nominally identical permalloy nanowires, with widths down to 150 nm, were fabricated onto a single electron transparent Si$_{3}$N$_{4}$ membrane using electron beam lithography (EBL) and focused ion beam (FIB) milling. Transmission electron microscopy (TEM) experiments were performed to compare the nanostructures produced by these two techniques in what we believe is the first direct comparison of fabrication techniques for nominally identical nanowires. Both EBL and FIB methods produced high quality structures with edge roughness being of the order of the mean grain size 5 -10 nm observed in the continuous films. However, significant grain growth was observed along the edges of the FIB patterned nanowires. Lorentz TEM \emph{in situ} imaging was carried out to compare the magnetic behavior of the domain walls in the patterned nanowires with anti-notches present to pin domain walls. The overall process of domain wall pinning and depinning at the anti-notches showed consistent behaviour between nanowires fabricated by the two methods with the FIB structures having slightly lower characteristic fields compared to the EBL wires. However, a significant difference was observed in the formation of a vortex structure inside the anti-notches of the EBL nanowires after depinning of the domain walls. No vortex structure was seen inside the anti-notches of the FIB patterned nanowires. Results from micromagnetic simulations suggest that the vortex structure inside the anti-notch can be suppressed if the saturation magnetization (M$_{s}$) is reduced along the nanowires edges. Whilst the two fabrication methods show that well defined structures can be produced for the dimensions considered here, the differences in the magnetic behavior for nominally identical structures may be an issue if such structures are to be used as conduits for domain walls in potential memory and logic applications.
△ Less
Submitted 8 August, 2015;
originally announced August 2015.
-
Approaches for modeling magnetic nanoparticle dynamics
Authors:
Daniel B. Reeves,
John B. Weaver
Abstract:
Magnetic nanoparticles are useful biological probes as well as therapeutic agents. There have been several approaches used to model nanoparticle magnetization dynamics for both Brownian as well as Néel rotation. The magnetizations are often of interest and can be compared with experimental results. Here we summarize these approaches including the Stoner-Wohlfarth approach, and stochastic approache…
▽ More
Magnetic nanoparticles are useful biological probes as well as therapeutic agents. There have been several approaches used to model nanoparticle magnetization dynamics for both Brownian as well as Néel rotation. The magnetizations are often of interest and can be compared with experimental results. Here we summarize these approaches including the Stoner-Wohlfarth approach, and stochastic approaches including thermal fluctuations. Non-equilibrium related temperature effects can be described by a distribution function approach (Fokker-Planck equation) or a stochastic differential equation (Langevin equation). Approximate models in several regimes can be derived from these general approaches to simplify implementation.
△ Less
Submitted 10 May, 2015;
originally announced May 2015.
-
Magnetic nanoparticle sensing: decoupling the magnetization from the excitation field
Authors:
Daniel B Reeves,
John B Weaver
Abstract:
Remote sensing of magnetic nanoparticles has exciting applications for magnetic nanoparticle hyperthermia and molecular detection. We introduce, simulate, and experimentally demonstrate an innovation---a sensing coil that is geometrically decoupled from the excitation field---for magnetic nanoparticle spectroscopy that increases the flexibility and capabilities of remote detection. The decoupling…
▽ More
Remote sensing of magnetic nanoparticles has exciting applications for magnetic nanoparticle hyperthermia and molecular detection. We introduce, simulate, and experimentally demonstrate an innovation---a sensing coil that is geometrically decoupled from the excitation field---for magnetic nanoparticle spectroscopy that increases the flexibility and capabilities of remote detection. The decoupling enhances the sensitivity absolutely; to small amounts of nanoparticles, and relatively; to small changes in the nanoparticle dynamics. We adapt a previous spectroscopic method that measures the relaxation time of nanoparticles and demonstrate a new measurement of nanoparticle temperature that could potentially be used concurrently during hyperthermia.
△ Less
Submitted 25 March, 2014;
originally announced March 2014.
-
Simulations of magnetic nanoparticle Brownian motion
Authors:
Daniel B Reeves,
John B Weaver
Abstract:
Magnetic nanoparticles are useful in many medical applications because they interact with biology on a cellular level thus allowing microenvironmental investigation. An enhanced understanding of the dynamics of magnetic particles may lead to advances in imaging directly in magnetic particle imaging (MPI) or through enhanced MRI contrast and is essential for nanoparticle sensing as in magnetic spec…
▽ More
Magnetic nanoparticles are useful in many medical applications because they interact with biology on a cellular level thus allowing microenvironmental investigation. An enhanced understanding of the dynamics of magnetic particles may lead to advances in imaging directly in magnetic particle imaging (MPI) or through enhanced MRI contrast and is essential for nanoparticle sensing as in magnetic spectroscopy of Brownian motion (MSB). Moreover, therapeutic techniques like hyperthermia require information about particle dynamics for effective, safe, and reliable use in the clinic. To that end, we have developed and validated a stochastic dynamical model of rotating Brownian nanoparticles from a Langevin equation approach. With no field, the relaxation time toward equilibrium matches Einstein's model of Brownian motion. In a static field, the equilibrium magnetization agrees with the Langevin function. For high frequency or low amplitude driving fields, behavior characteristic of the linearized Debye approximation is reproduced. In a higher field regime where magnetic saturation occurs, the magnetization and its harmonics compare well with the effective field model. On another level, the model has been benchmarked against experimental results, successfully demonstrating that harmonics of the magnetization carry enough information to infer environmental parameters like viscosity and temperature.
△ Less
Submitted 25 March, 2014;
originally announced March 2014.
-
Nonlinear simulations to optimize magnetic nanoparticle hyperthermia
Authors:
Daniel B. Reeves,
John B. Weaver
Abstract:
Magnetic nanoparticle hyperthermia is an attractive emerging cancer treatment, but the acting microscopic energy deposition mechanisms are not well understood and optimization suffers. We describe several approximate forms for the characteristic time of Néel rotations with varying properties and external influences. We then present stochastic simulations that show agreement between the approximate…
▽ More
Magnetic nanoparticle hyperthermia is an attractive emerging cancer treatment, but the acting microscopic energy deposition mechanisms are not well understood and optimization suffers. We describe several approximate forms for the characteristic time of Néel rotations with varying properties and external influences. We then present stochastic simulations that show agreement between the approximate expressions and the micromagnetic model. The simulations show nonlinear imaginary responses and associated relaxational hysteresis due to the field and frequency dependencies of the magnetization. This suggests efficient heating is possible by matching fields to particles instead of resorting to maximizing the power of the applied magnetic fields.
△ Less
Submitted 24 March, 2014;
originally announced March 2014.
