-
Improving spatial resolution of scanning SQUID microscopy with an on-chip design
Authors:
Y. P. Pan,
J. J. Zhu,
Y. Feng,
Y. S. Lin,
H. B. Wang,
X. Y. Liu,
H. Jin,
Z. Wang,
L. Chen,
Y. H. Wang
Abstract:
Scanning superconducting quantum interference device microscopy (sSQUID) is currently one of the most effective methods for direct and sensitive magnetic flux imaging on the mesoscopic scale. A SQUID-on-chip design allows integration of field coils for susceptometry in a gradiometer setup which is very desirable for measuring magnetic responses of quantum matter. However, the spatial resolution of…
▽ More
Scanning superconducting quantum interference device microscopy (sSQUID) is currently one of the most effective methods for direct and sensitive magnetic flux imaging on the mesoscopic scale. A SQUID-on-chip design allows integration of field coils for susceptometry in a gradiometer setup which is very desirable for measuring magnetic responses of quantum matter. However, the spatial resolution of such a design has largely been limited to micrometers due to the difficulty in approaching the sample. Here, we used electron beam lithography technology in the fabrication of the 3D nano-bridge-based SQUID devices to prepare pick-up coils with diameters down to 150 nm. Furthermore, we integrated the deep silicon etching process in order to minimize the distance between the pick-up coil and the wafer edge. Combined with a tuning-fork-based scanning head, the sharpness of the etched chip edge enables a precision of 5 nm in height control. By scanning measurements on niobium chessboard samples using these improved SQUID devices, we demonstrate sub-micron spatial resolutions in both magnetometry and susceptometry, significantly better than our previous generations of nano-SQUIDs. Such improvement in spatial resolution of SQUID-on-chip is a valuable progress for magnetic imaging of quantum materials and devices in various modes.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Matrix-assisted fabrication and exotic charge mobility of (Li,Fe)OHFeSe superconductor films
Authors:
Y. L. Huang,
Z. P. Feng,
J. Yuan,
W. Hu,
J. Li,
S. L. Ni,
S. B. Liu,
Y. Y. Mao,
H. X. Zhou,
H. B. Wang,
F. Zhou,
G. M. Zhang,
K. Jin,
X. L. Dong,
Z. X. Zhao
Abstract:
Superconducting (Li1-xFex)OHFe1-ySe films are attractive for both the basic research and practical application. However, the conventional vapor deposition techniques are not applicable in synthesizing the films of such a complex system. So no intrinsic charge transport measurements on the films are available so far to reveal the nature of charge carriers, which is fundamental to understanding the…
▽ More
Superconducting (Li1-xFex)OHFe1-ySe films are attractive for both the basic research and practical application. However, the conventional vapor deposition techniques are not applicable in synthesizing the films of such a complex system. So no intrinsic charge transport measurements on the films are available so far to reveal the nature of charge carriers, which is fundamental to understanding the iron-based superconductivity mechanism. Herein we report a soft chemical film technique (matrix-assisted hydrothermal epitaxial growth), by which we have succeeded in growing a series of (Li1-xFex)OHFe1-ySe films covering the whole superconducting regime, with the superconducting transition temperature (Tc) from 4 K up to 42 K. This film technique opens up a new way for fabricating other complex functional materials as well. Furthermore, our systematic transport investigation on the film samples indicates that both the electron and hole carriers contribute to the charge transport, with the scattering rates deviating from the Fermi liquid. We find that the superconductivity occurs upon the electron and hole mobility becoming divergent. And in the high Tc samples, the electron carriers are found much more mobile than the holes, a feature distinct from the low Tc samples. Hence, our transport results provide key insights into the underlying physics for iron-based high-Tc superconductivity.
△ Less
Submitted 8 November, 2017;
originally announced November 2017.
-
Thermal and electromagnetic properties of Bi$_2$Sr$_2$CaCu$_2$O$_8$ intrinsic Josephson junction stacks studied via one-dimensional coupled sine-Gordon equations
Authors:
F. Rudau,
M. Tsujimoto,
B. Gross,
T. E. Judd,
R. Wieland,
E. Goldobin,
N. Kinev,
J. Yuan,
Y. Huang,
M. Ji,
X. J. Zhou,
D. Y. An,
A. Ishii,
R. G. Mints,
P. H. Wu,
T. Hatano,
H. B. Wang,
V. P. Koshelets,
D. Koelle,
R. Kleiner
Abstract:
We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $300\,μ\mathrm{m}$ long intrinsic Josephson junction stack consisting of $N = 700$ junctions. The junctions in the stack are combined to $M$ segments where we assume that inside a segment all junctions behave identically. Most simul…
▽ More
We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $300\,μ\mathrm{m}$ long intrinsic Josephson junction stack consisting of $N = 700$ junctions. The junctions in the stack are combined to $M$ segments where we assume that inside a segment all junctions behave identically. Most simulations are for $M = 20$. For not too high bath temperatures there is the appearence of a hot spot at high bias currents. In terms of electromagnetic properties, robust standing wave patterns appear in the current density and electric field distributions. These patterns come together with vortex/antivortex lines across the stack that correspond to $π$ kink states, discussed before in the literature for a homogeneous temperature distribution in the stack. We also discuss scaling of the thermal and electromagnetic properties with $M$, on the basis of simulations with $M$ between 10 and 350.
△ Less
Submitted 5 March, 2015; v1 submitted 1 December, 2014;
originally announced December 2014.
-
Modeling the linewidth dependence of coherent terahertz emission from intrinsic Josephson junction stacks in the hot-spot regime
Authors:
B. Gross,
J. Yuan,
D. Y. An,
M. Y. Li,
N. Kinev,
X. J. Zhou,
M. Ji,
Y. Huang,
T. Hatano,
R. G. Mints,
V. P. Koshelets,
P. H. Wu,
H. B. Wang,
D. Koelle,
R. Kleiner
Abstract:
Recently it has been found that, when operated at large input power, the linewidth of terahertz radiation emitted from intrinsic Josephson junction stacks can be as narrow as some megahertz. In this high-bias regime a hot spot coexists with regions which are still superconducting. Surprisingly, the linewidth was found to decrease with increasing bath temperature. We present a simple model describi…
▽ More
Recently it has been found that, when operated at large input power, the linewidth of terahertz radiation emitted from intrinsic Josephson junction stacks can be as narrow as some megahertz. In this high-bias regime a hot spot coexists with regions which are still superconducting. Surprisingly, the linewidth was found to decrease with increasing bath temperature. We present a simple model describing the dynamics of the stack in the presence of a hot spot by two parallel arrays of pointlike Josephson junctions and an additional shunt resistor in parallel. Heat diffusion is taken into account by thermally coupling all elements to a bath at temperature T_b. We present current-voltage characteristics of the coupled system and calculations of the linewidth of the radiation as a function of T_b. In the presence of a spatial gradient of the junction parameters critical current and resistance, the linewidth deceases with increasing T_b, similar to the experimental observation.
△ Less
Submitted 12 July, 2013;
originally announced July 2013.
-
Hot-spot formation in stacks of intrinsic Josephson junctions in Bi2Sr2CaCu2O8
Authors:
B. Gross,
S. Guenon,
J. Yuan,
M. Y. Li,
J. Li,
A. Iishi,
R. G. Mints,
T. Hatano,
P. H. Wu,
D. Koelle,
H. B. Wang,
R. Kleiner
Abstract:
We have studied experimentally and numerically temperature profiles and the formation of hot spots in intrinsic Josephson junction stacks in Bi2Sr2CaCu2O8 (BSCCO). The superconducting stacks are biased in a state where all junctions are resistive. The formation of hot spots in this system is shown to arise mainly from the strongly negative temperature coefficient of the c-axis resistivity of BSCCO…
▽ More
We have studied experimentally and numerically temperature profiles and the formation of hot spots in intrinsic Josephson junction stacks in Bi2Sr2CaCu2O8 (BSCCO). The superconducting stacks are biased in a state where all junctions are resistive. The formation of hot spots in this system is shown to arise mainly from the strongly negative temperature coefficient of the c-axis resistivity of BSCCO at low temperatures. This leads to situations where the maximum temperature in the hot spot can be below or above the superconducting transition temperature Tc. The numerical simulations are in good agreement with the experimental observations.
△ Less
Submitted 20 May, 2013; v1 submitted 27 June, 2012;
originally announced June 2012.
-
Unusual linewidth dependence of coherent THz emission measured from intrinsic Josephson junction stacks in the hot-spot regime
Authors:
M. Y. Li,
J. Yuan,
N. Kinev,
J. Li,
B. Gross,
S. Guenon,
A. Ishii,
K. Hirata,
T. Hatano,
D. Koelle,
R. Kleiner,
V. P. Koshelets,
H. B. Wang,
P. H. Wu
Abstract:
We report on measurements of the linewidth Δf of THz radiation emitted from intrinsic Josephson junction stacks, using a Nb/AlN/NbN integrated receiver for detection. Previous resolution limited measurements indicated that Δf may be below 1 GHz - much smaller than expected from a purely cavity-induced synchronization. While at low bias we found Δf to be not smaller than ? 500 MHz, at high bias, wh…
▽ More
We report on measurements of the linewidth Δf of THz radiation emitted from intrinsic Josephson junction stacks, using a Nb/AlN/NbN integrated receiver for detection. Previous resolution limited measurements indicated that Δf may be below 1 GHz - much smaller than expected from a purely cavity-induced synchronization. While at low bias we found Δf to be not smaller than ? 500 MHz, at high bias, where a hotspot coexists with regions which are still superconducting, Δf turned out to be as narrow as 23 MHz. We attribute this to the hotspot acting as a synchronizing element. Δf decreases with increasing bath temperature, a behavior reminiscent of motional narrowing in NMR or ESR, but hard to explain in standard electrodynamic models of Josephson junctions.
△ Less
Submitted 11 June, 2012;
originally announced June 2012.
-
Interaction of hot spots and THz waves in Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks of various geometry
Authors:
S. Guénon,
M. Grünzweig,
B. Gross,
J. Yuan,
Z. G. Jiang,
Y. Y. Zhong,
A. Iishi,
P. H. Wu,
T. Hatano,
D. Koelle,
H. B. Wang,
R. Kleiner
Abstract:
At high enough input power in stacks of Bi_2Sr_2CaCu_2O8 intrinsic Josephson junctions a hot spot (a region heated to above the superconducting transition temperature) coexists with regions still in the superconducting state. In the ``cold'' regions cavity resonances can occur, synchronizing the ac Josephson currents and giving rise to strong coherent THz emission. We investigate the interplay of…
▽ More
At high enough input power in stacks of Bi_2Sr_2CaCu_2O8 intrinsic Josephson junctions a hot spot (a region heated to above the superconducting transition temperature) coexists with regions still in the superconducting state. In the ``cold'' regions cavity resonances can occur, synchronizing the ac Josephson currents and giving rise to strong coherent THz emission. We investigate the interplay of hot spots and standing electromagnetic waves by low temperature scanning laser microscopy and THz emission measurements, using stacks of various geometries. For a rectangular and a arrow-shaped structure we show that the standing wave can be turned on and off in various regions of the stack structure, depending on the hot spot position. We also report on standing wave and hot spot formation in a disk shaped mesa structure.
△ Less
Submitted 12 May, 2010;
originally announced May 2010.
-
Coherent THz emission of Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks in the hot spot regime
Authors:
H. B. Wang,
S. Guenon,
B. Gross,
J. Yuan,
Z. G. Jiang,
Y. Y. Zhong,
M. Gruenzweig,
A. Iishi,
P. H. Wu,
T. Hatano,
D. Koelle,
R. Kleiner
Abstract:
We report on THz emission measurements and low temperature scanning laser imaging of Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks. Coherent emission is observed at large dc input power, where a hot spot and a standing wave, formed in the "cold" part of the stack, coexist. By varying the hot spot size the cavity resonance frequency and the emitted radiation can be tuned. The linewidth of r…
▽ More
We report on THz emission measurements and low temperature scanning laser imaging of Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks. Coherent emission is observed at large dc input power, where a hot spot and a standing wave, formed in the "cold" part of the stack, coexist. By varying the hot spot size the cavity resonance frequency and the emitted radiation can be tuned. The linewidth of radiation is much smaller than expected from the quality factor of the cavity mode excited. Thus, an additional mechanism of synchronization seems to play a role, possibly arising from nonequilibrium processes at the hot spot edge.
△ Less
Submitted 1 May, 2010;
originally announced May 2010.
-
Thickness-induced insufficient oxygen reduction in La(2-x)CexCuO4 thin films
Authors:
B. X. Wu,
K. Jin,
J. Yuan,
H. B. Wang,
T. Hatano,
B. R. Zhao,
B. Y. Zhu
Abstract:
A series of electron-doped cuprate La(2-x)CexCuO4 thin films with different thicknesses have been fabricated and their annealing time are adjusted carefully to ensure the highest superconducting transition temperature. The transport measurements indicate that, with the increase of the film thickness (<100 nm), the residual resistivity increases and the Hall coefficient shifts in the negative dir…
▽ More
A series of electron-doped cuprate La(2-x)CexCuO4 thin films with different thicknesses have been fabricated and their annealing time are adjusted carefully to ensure the highest superconducting transition temperature. The transport measurements indicate that, with the increase of the film thickness (<100 nm), the residual resistivity increases and the Hall coefficient shifts in the negative direction. Further more, the X-ray diffraction data reveal that the c-axis lattice constant c0 increases with the decrease of film thickness. These abnormal phenomena can be attributed to the insufficient oxygen reduction in the thin films. Considering the lattice mismatching in the ab-plane between the SrTiO3 substrates and the films, the compressive stress from the substrates may be responsible for the more difficult reduction of the oxygen in the thin films.
△ Less
Submitted 15 August, 2009;
originally announced August 2009.
-
Preparation of electron-doped La(2-x)CexCuO4 thin films with various Ce doping by dc magnetron sputtering
Authors:
B. X. Wu,
K. Jin,
J. Yuan,
H. B. Wang,
T. Hatano,
B. R. Zhao,
B. Y. Zhu
Abstract:
A series of c-axis oriented electron-doped high-Tc superconducting La(2-x)CexCuO4 thin films, from heavily underdoped x=0.06 to heavily overdoped x=0.19, have been synthesized by dc magnetron sputtering technique on (100) SrTiO3 substrates. The influence of various fabrication conditions, such as the deposition temperature and the deposition rate, etc., on the quality of the thin films has been…
▽ More
A series of c-axis oriented electron-doped high-Tc superconducting La(2-x)CexCuO4 thin films, from heavily underdoped x=0.06 to heavily overdoped x=0.19, have been synthesized by dc magnetron sputtering technique on (100) SrTiO3 substrates. The influence of various fabrication conditions, such as the deposition temperature and the deposition rate, etc., on the quality of the thin films has been scrutinized. We find that the quality of the films is less sensitive to the deposition temperature in the overdoped region than that in the underdoped region. In the phase diagram of Tc(x), the superconducting dome indicates that the optimally doping level is at the point x=0.105 with the transition temperature Tc0 = 26.5 K. Further more, both the disappearance of the upturn in the $ρ_{xx}$(T) curve at low temperature under H=10 T and the positive differential Hall coefficient, $R_H'=d ρ_{xy}/dH$, are observed around x = 0.15, implying a possible rearrangement of Fermi surface at this doping level.
△ Less
Submitted 15 August, 2009;
originally announced August 2009.
-
Hot spots and waves in Bi2Sr2CaCu2O8 intrinsic Josephson junction stacks -a study by Low Temperature Scanning Laser Microscopy
Authors:
H. B. Wang,
S. Guénon,
J. Yuan,
A. Iishi,
S. Arisawa,
T. Hatano,
T. Yamashita,
D. Koelle,
R. Kleiner
Abstract:
Recently, it has been shown that large stacks of intrinsic Josephson junctions in Bi2Sr2CaCu2O8 emit synchronous THz radiation, the synchronization presumably triggered by a cavity resonance. To investigate this effect we use Low Temperature Scanning Laser Microscopy to image electric field distributions. Apart from verifying the appearance of cavity modes at low bias we find that, in a high inp…
▽ More
Recently, it has been shown that large stacks of intrinsic Josephson junctions in Bi2Sr2CaCu2O8 emit synchronous THz radiation, the synchronization presumably triggered by a cavity resonance. To investigate this effect we use Low Temperature Scanning Laser Microscopy to image electric field distributions. Apart from verifying the appearance of cavity modes at low bias we find that, in a high input power regime, standing-wave patterns are created through interactions with a hot spot, possibly pointing to a new mode of generating synchronized radiation in intrinsic Josephson junction stacks.
△ Less
Submitted 17 July, 2008;
originally announced July 2008.
-
Periodic Oscillations of Josephson-Vortex Flow Resistance in Oxygen-Deficient Y1Ba2Cu3Ox
Authors:
M. Nagao,
S. Urayama,
S. M. Kim,
H. B. Wang,
K. S. Yun,
Y. Takano,
T. Hatano,
I. Iguchi,
T. Yamashita,
M. Tachiki,
H. Maeda,
M. Sato
Abstract:
We measured the Josephson vortex flow resistance as a function of magnetic field applied parallel to the ab-planes using annealed Y1Ba2Cu3Ox intrinsic Josephson junctions having high anisotropy (around 40) by oxygen content reduction. Periodic oscillations were observed in magnetic fields above 45-58 kOe, corresponding to dense-dilute boundary for Josephson vortex lattice. The observed period of…
▽ More
We measured the Josephson vortex flow resistance as a function of magnetic field applied parallel to the ab-planes using annealed Y1Ba2Cu3Ox intrinsic Josephson junctions having high anisotropy (around 40) by oxygen content reduction. Periodic oscillations were observed in magnetic fields above 45-58 kOe, corresponding to dense-dilute boundary for Josephson vortex lattice. The observed period of oscillations, agrees well with the increase of one fluxon per two junctions ($H_{p}$\textit{=$Φ$}$_{0}$\textit{/2Ls}), may correspond to formation of a triangular lattice of Josephson vortices as has been reported by Ooi et al. for highly anisotropic (larger than 200) Bi-2212 intrinsic Josephson junctions.
△ Less
Submitted 12 June, 2006; v1 submitted 8 June, 2006;
originally announced June 2006.
-
Periodic oscillations of flux flow resistance in intrinsic Josephson junctions with various lateral sizes down to a size of non-linear core of Josephson vortex
Authors:
S. Urayama,
T. Hatano,
H. B. Wang,
M. Nagao,
S. M. Kim,
J. Arai
Abstract:
To investigate in-phase structures (rectangular lattice) of Josephson vortex lattice (JVL) in intrinsic Josephson junctions (IJJs) of Bi2Sr2CaCu2O8+d, we fabricated IJJs with various lateral sizes down to a size of non-linear core of Josephson vortex using focused-ion-beam etching and measured flux flow resistance (RFF) with in-plane magnetic fields (H). We have found that above a size-independe…
▽ More
To investigate in-phase structures (rectangular lattice) of Josephson vortex lattice (JVL) in intrinsic Josephson junctions (IJJs) of Bi2Sr2CaCu2O8+d, we fabricated IJJs with various lateral sizes down to a size of non-linear core of Josephson vortex using focused-ion-beam etching and measured flux flow resistance (RFF) with in-plane magnetic fields (H). We have found that above a size-independent critical field, the critical current shows Fraunhofer pattern in narrow-length IJJs (0.29-2.77 mm), and then the RFF~H oscillates with H0 period. Most strikingly, such oscillations become pulse-like in sub-micron IJJs, indicating that between the pulses, the rectangular JVLs become major structures.
△ Less
Submitted 4 July, 2006; v1 submitted 28 February, 2006;
originally announced February 2006.
-
Fiske steps studied with flux-flow resistance oscillation in a narrow stack of Bi2Sr2CaCu2O8+d junctions
Authors:
S. M. Kim,
H. B. Wang,
T. Hatano,
S. Urayama,
S. Kawakami,
M. Nagao,
Y. Takano,
K. Lee,
T. Yamashita
Abstract:
We have experimentally investigated the fluxon dynamics in a narrow Bi2Sr2CaCu2O8+d stack with junction length L~1.8 um. As an evidence of high-frequency excitation by a collective cavity mode, under an (in-plane) external magnetic field, the current-voltage characteristics show prominent Fiske steps with the corresponding resonance frequencies of 75-305 GHz. Further study of flux-flow resistanc…
▽ More
We have experimentally investigated the fluxon dynamics in a narrow Bi2Sr2CaCu2O8+d stack with junction length L~1.8 um. As an evidence of high-frequency excitation by a collective cavity mode, under an (in-plane) external magnetic field, the current-voltage characteristics show prominent Fiske steps with the corresponding resonance frequencies of 75-305 GHz. Further study of flux-flow resistance oscillation with various c-axis currents clarifies the correlation with Fiske steps by distinguishing two different regions i.e., static flux-flow region at low bias current level and dynamic Fiske step region at high bias current level.
△ Less
Submitted 1 September, 2005; v1 submitted 27 December, 2004;
originally announced December 2004.
-
Macroscopic quantum tunneling in a d-wave high-Tc superconductor
Authors:
K. Inomata,
S. Sato,
K. Nakajima,
A. Tanaka,
Y. Takano,
H. B. Wang,
M. Nagao,
S. Kawabata,
T. Hatano
Abstract:
There is a wide recognition that Josephson-junction-like structures intrinsic to the layered cuprate high temperature superconductors offer an attractive stage for exploiting possible applications to new quantum technologies. On the other hand the low energy quasiparticle excitations characteristically present in these d-wave superconductors may easily destruct the coherence required. Here we de…
▽ More
There is a wide recognition that Josephson-junction-like structures intrinsic to the layered cuprate high temperature superconductors offer an attractive stage for exploiting possible applications to new quantum technologies. On the other hand the low energy quasiparticle excitations characteristically present in these d-wave superconductors may easily destruct the coherence required. Here we demonstrate for the first time the feasibility of macroscopic quantum tunneling in the intrinsic Josephson junctions of a high temperature superconductor, and find it to be characterized by a high classic-to-quantum crossover temperature and a relatively weak quasiparticle dissipation.
△ Less
Submitted 26 May, 2005; v1 submitted 22 December, 2004;
originally announced December 2004.
-
3-dimensional arrays of BiSrCaCuO-2212 intrinsic Josephson junctions and the zero-crossing Shapiro steps at 760 GHz
Authors:
H. B. Wang,
P. H. Wu,
J. CHen,
K. Maeda,
T. Yamashita
Abstract:
On a slice of Bi_2Sr_2CaCu_2O_{8+x} 200~300 nm thick, stacks of intrinsic Josephson junctions are patterned, connected to each other, and integrated with a bow-tie antenna and some chokes. Over an area of 150 microns by 170 microns, so far we are able to fabricate up to 256 stacks with over 11,000 junctions. Such 3-dimensional arrays of intrinsic Josephson junctions respond sensitively to irradi…
▽ More
On a slice of Bi_2Sr_2CaCu_2O_{8+x} 200~300 nm thick, stacks of intrinsic Josephson junctions are patterned, connected to each other, and integrated with a bow-tie antenna and some chokes. Over an area of 150 microns by 170 microns, so far we are able to fabricate up to 256 stacks with over 11,000 junctions. Such 3-dimensional arrays of intrinsic Josephson junctions respond sensitively to irradiation at 760 GHz from a far-infrared laser, showing clear zero-crossing Shapiro steps up to 0.75 V. In addition, possible applications in quantum voltage standard etc are also discussed here. The high density of integration of Josephson junctions is also promising for many other applications.
△ Less
Submitted 11 October, 2001;
originally announced October 2001.
